Download:
pdf |
pdfOption 3—Non-Title 13 Local Address List Submission
MAF/TIGER Partnership Software (MTPS)
TABLE OF CONTENTS
CHAPTER 1 INTRODUCTION TO THE 2010 DECENNIAL CENSUS LOCAL
UPDATE OF CENSUS ADDRESSES (LUCA) PROGRAM
1
The 2010 Decennial Census Local Update of Census Addresses (LUCA) Program............... 1
Background ............................................................................................................................... 2
The Census Address List Improvement Act.......................................................................... 2
The Census Bureau’s Master Address File (MAF) ............................................................... 2
The Topologically Integrated Geographic Encoding and Referencing (TIGER®) Database 2
LUCA Program Responsibilities................................................................................................ 3
Participant’s LUCA Program Responsibilities ....................................................................... 3
Training and Technical Support ................................................................................................ 4
Schedule ................................................................................................................................... 4
Respondent Burden .................................................................................................................. 5
CHAPTER 2 BEFORE YOU BEGIN YOUR REVIEW
6
Introduction ............................................................................................................................... 6
What is a Housing Unit?............................................................................................................ 6
What are Group Quarters? ....................................................................................................... 7
Unacceptable Types of Housing Units and Group Quarters..................................................... 7
Census Bureau Addresses ....................................................................................................... 8
Residential and Nonresidential Addresses ........................................................................... 8
Address Formats................................................................................................................... 8
Census Tract............................................................................................................................. 9
Census Block ............................................................................................................................ 9
What is Geocoding?................................................................................................................ 10
Strategies for Reviewing the Census Bureau’s Address Count List....................................... 10
Local Address Sources ........................................................................................................... 10
CHAPTER 3 CENSUS SUPPLIED MATERIALS
12
Introduction ............................................................................................................................. 12
The MAF/TIGER Partnership Software (MTPS) Version 2.1.................................................. 12
The MTPS Computer Based Training (CBT) .......................................................................... 13
Address Count List File ........................................................................................................... 13
Address List Template ............................................................................................................ 13
Shapefiles ............................................................................................................................... 13
Other Files and Software ........................................................................................................ 13
Setup File ................................................................................................................................ 13
Readme.txt File ....................................................................................................................... 13
The MTPS LUCA User Guide ................................................................................................. 13
Zip Software ............................................................................................................................ 13
Adobe® PDF Reader Software................................................................................................ 13
Adobe® Flash Software ........................................................................................................... 14
CHAPTER 4 THE CENSUS BUREAU’s ADDRESS COUNT LIST
15
Introduction ............................................................................................................................. 15
The Address Count List........................................................................................................... 15
CHAPTER 5 SETTING UP THE MAF/TIGER PARTNERSHIP SOFTWARE
(MTPS) FOR LUCA REVIEW
17
Introduction ............................................................................................................................. 17
Installing the MTPS ................................................................................................................. 17
i
Starting the MTPS................................................................................................................... 18
Completing the MTPS CBT..................................................................................................... 18
Beginning the LUCA Review with the MTPS .......................................................................... 19
Overview of Toolboxes and Buttons.......................................................................................... 21
Main Menu .............................................................................................................................. 21
The Standard Toolbox............................................................................................................. 22
The Tools Toolbox .................................................................................................................. 22
The LUCA Toolbox.................................................................................................................. 24
Other LUCA Toolbox Icons ..................................................................................................... 24
The Line Editing Toolbox ........................................................................................................ 24
Other Line Editing Toolbox Icons............................................................................................ 25
Bookmarks .............................................................................................................................. 25
Additional Resources................................................................................................................. 26
The MTPS Computer-Based Training (CBT) .......................................................................... 26
The MTPS Help Menu............................................................................................................. 26
LUCA Program Questions ...................................................................................................... 28
LUCA Technical Help Desk .................................................................................................... 28
LUCA Website......................................................................................................................... 28
CHAPTER 6 SUBMITTING YOUR LOCAL ADDRESS LIST
29
The Predefined Computer-Readable Address List File Format ................................................ 29
The Address Template Record Layout File ............................................................................... 30
Creating Your Local Address List File CD .............................................................................. 32
Shipping Your Local Address List to the Census Bureau ....................................................... 32
CHAPTER 7 UPDATING CENSUS BUREAU SHAPEFILES
33
Introduction ............................................................................................................................. 33
Reading a Census Bureau Map.............................................................................................. 33
Examples of Map Updates ...................................................................................................... 34
Map Example 1: Adding a New Street ................................................................................... 34
Map Example 2: Correcting a Street Name ........................................................................... 49
Map Example 3: Moving a Street........................................................................................... 50
Map Example 4: Deleting a Street ......................................................................................... 51
Creating the Changes File ...................................................................................................... 52
Shipping the Changes File CD................................................................................................ 52
Appendix A Inventory Form
54
Appendix B MAF/TIGER Feature Classification Codes
56
MAF/TIGER Feature Classification Codes ................................................................................ 57
Road Features..................................................................................................................... 57
Water Features.................................................................................................................... 57
Railroad ............................................................................................................................... 57
Miscellaneous Features ...................................................................................................... 57
Appendix C Selection Sets
58
Introduction ................................................................................................................................ 59
Creating a Selection Set ............................................................................................................ 59
Saving a Selection Set............................................................................................................... 61
Deleting a Selection Set ............................................................................................................ 61
ii
Appendix D Location Description and Street Type Abbreviation Examples
63
Appendix E Unit Designation Abbreviation Examples
65
Appendix F
67
MAF/TIGER Partnership Software (MTPS) Boundary and Annexation Survey
(BAS) Procedures
67
1.0 Introduction to the Boundary and Annexation Survey ......................................................... 68
1.1 Overview of the BAS ......................................................................................................... 68
1.2 Legal Disputes .................................................................................................................. 68
1.3 Key Dates for BAS Respondents or Participants.............................................................. 69
2.0 Viewing and Updating Boundary Data and BAS Forms Using the MTPS........................... 70
2.1 Logging onto the MTPS .................................................................................................... 70
2.2 Computer Based Training (CBT) ...................................................................................... 71
2.3 Updating Your Contact Information................................................................................... 71
2.4 Reviewing and Updating the BAS Forms.......................................................................... 72
2.4.1 Incorporated Place Form............................................................................................ 72
2.4.2 Minor Civil Division (MCD) Form................................................................................ 76
2.4.3 County Form .............................................................................................................. 78
2.4.4 American Indian Areas Form ..................................................................................... 79
2.5 Opening the Map to Make Boundary Updates in the MTPS............................................. 84
2.6 Customizing the Map View ............................................................................................... 85
2.7 Editing the Boundary Data in the MTPS ........................................................................... 86
2.7.1 Map Editing Toolboxes............................................................................................... 86
2.7.2 Boundary Changes Using the BAS Toolbar............................................................... 87
2.7.3 Linear Feature Updates ............................................................................................. 91
2.7.4 Area Landmark Updates ............................................................................................ 91
2.7.5 Point Landmark Updates............................................................................................ 94
3.0 Reviewing Updates.............................................................................................................. 96
4.0 Printing Maps of your Boundary Changes........................................................................... 97
Appendix 1: Tool Explanations by Toolbox ............................................................................... 98
Table 1: General Toolbox ....................................................................................................... 98
Table 2: BAS and Area Editing Toolboxes: Tools to Identify Entity and Type of Change ...... 99
Table 3: Line Editing Toolbox ............................................................................................... 100
Table 4: Point Editing Toolbox .............................................................................................. 101
Appendix 2: Acceptable Changes by Entity Type ................................................................... 103
Appendix G U.S. Census Bureau Regional Offices
104
Glossary
106
Index
111
iii
CHAPTER 1
INTRODUCTION TO THE 2010 DECENNIAL CENSUS LOCAL UPDATE OF
CENSUS ADDRESSES (LUCA) PROGRAM
The 2010 Decennial Census Local Update of Census Addresses (LUCA) Program
Background
The Census Address List Improvement Act
The Census Bureau’s Master Address File (MAF)
The Topologically Integrated Geographic Encoding and Referencing (TIGER®)
Database
LUCA Program Responsibilities
Census Bureau’s LUCA Program Responsibilities
Participant’s LUCA Program Responsibilities
Training and Technical Support
The LUCA Schedule
Respondent Burden
The 2010 Decennial Census Local Update of Census Addresses (LUCA)
Program
The Local Update of Census Addresses (LUCA) Program is an integral part of
the 2010 Census activities that utilizes the expertise of tribal, state, and local
governments to improve the accuracy and completeness of the address list
used to take the census.
The U.S. Census Bureau invited the highest elected official of your
jurisdiction to participate in this program. Your jurisdiction selected Option
3, Non-Title 13 Local Address List Submission using the Census Bureau
supplied MAF/TIGER Partnership Software (MTPS). This option allows you
to:
•
Review the Census Bureau’s Address Count List for your jurisdiction.
This list is for reference purposes only.
•
Submit your local address list file of city-style 1 single or multiunit
structure or group quarters 2 residential addresses only in a predefined
Census Bureau computer-readable format. The Census Bureau will
only accept local address files (city-style addresses only) in the
predefined format as explained in Chapter 6.
•
Identify any additions, deletions, or corrections to boundaries, roads,
or other physical features on the Census Bureau paper maps or submit
1
A city-style address consists of a house number and street name; for example, 201 Main Street. The address may or
may not be used for the delivery of mail and may include apartment numbers/designations or similar identifiers. See
Chapter 2 for a complete definition.
2
A group quarters is a place where people live or stay that is normally owned or managed by an entity or
organization providing housing and/or services for the residents. See Chapter 2 for a complete definition.
Option 3–Non-Title 13 Local Address List Submission MTPS
1
Chapter 1: Introduction to the 2010 Decennial Census Local Update of Census
Addresses (LUCA) Program
an updated version of the digital map file (shapefile) provided by the
Census Bureau.
Background
The Census Address List Improvement Act
The Census Address List Improvement Act of 1994 (Public Law 103-430)
strengthened the Census Bureau’s partnership capabilities with tribal, state,
and local governments by expanding the methods the Census Bureau could
use to exchange address information. Designed to improve the accuracy of
the Census Bureau’s address list, the Act authorized the Census Bureau to
provide individual addresses to officials of tribal, state, and local
governments who agreed to conditions of confidentiality. Census 2000
marked the first decennial census for which the Census Bureau could
provide its address list for review to governments that signed the required
confidentiality agreement.
The Census Bureau’s Master Address File (MAF)
In preparation for Census 2000, the Census Bureau created the Master
Address File (MAF) by merging the 1990 Address Control File3 with the
latest version of the U.S. Postal Service’s (USPS) Delivery Sequence File 4
(DSF). The MAF is a nationwide database of all addresses used to support
many of the Census Bureau’s operations. Besides containing mailing
addresses and ZIP Codes, an address record in the MAF also contains
geographic information about the location of addresses. In areas where
there are noncity-style addresses (e.g., rural route or post office box
number), the address record may contain additional information such as a
location description.
The Topologically Integrated Geographic Encoding and Referencing
(TIGER®) Database
Address records in the MAF are linked to feature segments in the
Topologically Integrated Geographic Encoding and Referencing (TIGER®)
database. The TIGER® database includes the geographic coordinates and
names of all streets, water features, and other linear features, and
boundaries for all jurisdictions and statistical areas (census tracts 5, census
3
The 1990 residential address list used to label questionnaires, control the mail response check-in
operation, and determine the nonresponse follow-up workload.
4
A computerized file containing all delivery point addresses serviced by the U.S. Postal Service (USPS).
The USPS updates the DSF continuously as its letter carriers identify addresses for new delivery points or
changes in the status of existing addresses.
5
A census tract is a small, relatively permanent statistical division of a county or statistically equivalent
entity, delineated for the purpose of presenting Census Bureau statistical data.
2
Option 3–Non-Title 13 Local Address List Submission MTPS
Chapter 1: Introduction to the 2010 Decennial Census Local Update of Census
Addresses (LUCA) Program
blocks 6, etc.) used to tabulate decennial census data. The TIGER®
database also includes address ranges 7 along streets that have city-style
addresses and the hierarchy of census geographic area codes from the state
level down to individual census blocks
(www.census.gov/geo/www/geodiagram.html). By linking address records
in the MAF to the TIGER® database, the Census Bureau is able to identify
street segments along which an individual address exists and determine the
geographic code that applies to that address.
LUCA Program Responsibilities
The Census Bureau’s LUCA program responsibilities include:
•
Provide training to LUCA program participants.
•
Provide the necessary materials to participants.
•
Provide technical assistance.
•
Process updates submitted by LUCA participants.
•
Conduct a 100% Address Canvassing (field check) operation. The
Census Bureau will visit each census block within your jurisdiction
during this operation to update our address list and validate your
LUCA submissions.
•
Provide feedback materials for your review.
Participant’s LUCA Program Responsibilities
As a participant in the LUCA program, your responsibilities include:
•
Select your LUCA liaison and reviewers.
•
Sign and return the Registration Form.
•
Complete and return the Participation Option/Product Preference
form.
•
Ensure that everyone working on the LUCA program understands
the procedures for participating in the program as well as Census
Bureau terminology and concepts.
•
Ensure the receipt of all required materials for the LUCA program
review.
•
Prepare a strategy to conduct the review of LUCA materials.
6
A census block is a geographic area bounded by visible features, such as streets, roads, streams, and
railroad tracks, and invisible features, such as the boundaries of governmental units and other legal entities.
Census blocks are the smallest area for which the Census Bureau collects and tabulates statistical
information.
7
Address ranges are the lowest and highest address numbers used to identify structures along each side of a street
segment that has city-style addresses. Usually one side of the street has even address numbers and the other side has
odd address numbers.
Option 3–Non-Title 13 Local Address List Submission MTPS
3
Chapter 1: Introduction to the 2010 Decennial Census Local Update of Census
Addresses (LUCA) Program
•
Within 120 calendar days of receiving your LUCA materials,
complete your LUCA review and submit your updated materials to
the Census Bureau.
•
Review the Census Bureau’s feedback materials.
Training and Technical Support
Census Bureau staff will conduct LUCA training workshops beginning in
August of 2007. These training workshops will provide you with hands-on
experience in using the 2010 Decennial Census LUCA Program materials. In
addition, computer-based training (CBT) is available on the LUCA Program
CBT CD-ROM and the LUCA Web site at
.
Should you need additional information, please contact your Census
Bureau Regional Office toll free at 1-866-511-LUCA (5822) or for
technical assistance about computer applications including the
MAF/TIGER Partnership Software (MTPS), please call the Technical
Help Desk toll free at 1-866-919-LUCA (5822).
Schedule
4
January–February 2007
LUCA advance notification letters and
information materials were mailed to highest
elected officials and other contacts in eligible,
active, functioning governments.
March–June 2007
LUCA Promotional Workshops were
conducted.
August 2007
LUCA invitation letters and registration
materials were mailed to the highest elected
officials and a courtesy copy to other contacts in
eligible, active, functioning governments.
August 2007–January 2008
Invited governments register for LUCA and the
Census Bureau ships LUCA review materials to
each participating government.
August 2007
LUCA Training Workshops begin.
September 2007–March 2008
Option 3 participants may review the Census
Bureau’s Address Count List and submit their
local address list file along with their MTPS
map updates to their Census Bureau’s Regional
Office within 120 calendar days from the receipt
of materials.
Option 3–Non-Title 13 Local Address List Submission MTPS
Chapter 1: Introduction to the 2010 Decennial Census Local Update of Census
Addresses (LUCA) Program
October 2007–October 2008
November 2008–June 2009
Census Bureau reviews participant’s LUCA
submissions and updates the MAF/TIGER
database.
Census Bureau prepares for and conducts an
Address Canvassing Operation using GPSequipped hand held computers.
August 2009–October 2009
Census Bureau provides feedback materials to
participants showing how we processed each
participant’s LUCA submissions.
September 2009–December 2009
Participants review feedback materials and
Option 1 and Option 2 participants have the
opportunity to appeal the results to the LUCA
Appeals Office.
September 2009–January 2010
LUCA Appeals Office reviews and adjudicates
Option 1 and Option 2 participant appeals.
Respondent Burden
The Census Bureau estimates that it will take between 105 and 1,575 hours to
complete the LUCA review depending on the number of addresses and rate of
address growth and change. This includes the time needed to read the
invitation materials and complete the registration forms, and upon receipt of
the LUCA materials, to read the instructions, assemble and review the LUCA
materials, and provide updates.
Please send comments regarding this burden estimate or any other aspect of
this collection of information, including suggestions for reducing this burden
to:
Paperwork Project 0607-0795
4600 Silver Hill Road, Room 3K138
Washington, DC 20233
Or you may e-mail comments to ; use "Paperwork
Project 0607-0795" as the subject. Please include a copy of your message
addressed to .
Under the paperwork Reduction Act, the Census Bureau cannot ask you to
respond to a collection of information unless it displays a currently valid
Office of Management and Budget (OMB) control number. The OMB
number is found in the upper right corner of each LUCA form.
Option 3–Non-Title 13 Local Address List Submission MTPS
5
CHAPTER 2
BEFORE YOU BEGIN YOUR REVIEW
Introduction
What is a Housing Unit?
What are Group Quarters?
Unacceptable Types of Housing Units and Group Quarters
Census Bureau Addresses
Census Tract
Census Block
What is Geocoding?
Strategies for Reviewing the Census Bureau’s Address Count List
Local Address Sources
Introduction
Chapter 2 explains some of the terms and concepts used by the Census Bureau
and recommended strategies for your LUCA review. Refer to the Glossary or
visit the Census Bureau’s Web site at for additional terms
and definitions.
What is a Housing Unit?
A single-family house, townhouse, mobile home, trailer, apartment, group of
rooms, or a single room occupied as a separate living quarters or, if vacant,
intended for occupancy as a separate living quarters. A separate living
quarters is one in which one or more occupants (or intended occupants, if
vacant) live separate from any other individual(s) in the building and have
direct access to the living quarters without going through another living
quarters, such as from outside the building or through a common hall.
The following types of housing units are acceptable and should be included on
the address list you submit to the Census Bureau:
6
•
Houses, including townhouses, condominiums, and apartments.
•
Living quarters within an otherwise nonresidential structure such as an
apartment within a church, school, or business.
•
Mobile homes or trailers occupied as separate living quarters, or if
vacant, intended for occupancy as separate living quarters.
•
Any housing units under construction that will be habitable (closed to
the elements with final roof, windows, and doors) on Census Day,
April 1, 2010.
Option 3–Non-Title 13 Local Address List Submission MTPS
Chapter 2: Before You Begin Your Review
What are Group Quarters?
A place where people live or stay, in a group living arrangement, that is
owned or managed by an entity or organization providing housing and/or
services for the residents. This is not a typical household-type living
arrangement. These services may include custodial or medical care as well
as other types of assistance, and residency is commonly restricted to those
receiving these services. People living in group quarters are usually not
related to each other.
The following types of group quarters are acceptable and should be included
on the address list you submit to the Census Bureau:
•
Correctional facilities.
•
Juvenile facilities.
•
Nursing homes.
•
Hospitals with long-term care facilities.
•
College or university dormitories, fraternities, sororities.
•
Dormitories for workers.
•
Religious group quarters.
•
Shelters.
•
Group homes.
•
Any group quarters under construction that will be habitable (closed to
the elements with final roof, windows, and doors) on Census Day,
April 1, 2010.
NOTE: Housing units and group quarters can exist within the same structure.
Unacceptable Types of Housing Units and Group Quarters
Exclude the following unacceptable types of housing units and group quarters
addresses from your address list:
•
•
•
•
•
•
Condemned or scheduled for demolition.
Being converted or remodeled for nonresidential purposes.
Used solely for nonresidential storage.
Used solely as offices or businesses in which no one is living.
Used solely for ceremonial purposes.
Any units under construction that will not be habitable (closed to the
elements with final roof, windows, and doors) on Census Day,
April 1, 2010.
Option 3–Non-Title 13 Local Address List Submission MTPS
7
Chapter 2: Before You Begin Your Review
Census Bureau Addresses
Residential and Nonresidential Addresses
The Census Bureau divides all addresses in two use types, residential and
nonresidential. Residential addresses are addresses of housing units
and/or group quarters where one or more persons could live.
Nonresidential addresses are addresses of a structure or unit within a
structure that do not serve as a residence, such as commercial
establishments, schools, government offices, and churches.
Some structures can contain both residential and nonresidential units, even
though they have a single address such as an apartment over a store or a
home with an office.
Address Formats
City-Style Address Format
The Census Bureau classifies housing unit and group quarters
addresses that have a house number and street name address, for
example, 212 Elm Street or 137 Clark Ct., Apt. 316, as city-style
addresses. In some instances, the house number may also include an
alpha character such as 35A or W9254. These addresses are used for
mailing or to provide location for emergency services, such as police,
fire, and rescue (E-911 addresses).
City-style addresses for housing units in multiunit structures, such as
apartment buildings, contain a unit designator, for example, Apt 101 or
Suite D or a location designator such as “rear” or “basement” (See
Appendix F, Unit Designation Abbreviations Example). The Census
Bureau and the USPS treat these designators as part of the housing unit
address and they are included in each affected census address record.
Noncity-Style Address Format
The Census Bureau classifies addresses that do not include a house
number and/or a street name as noncity-style addresses. Noncity-style
addresses also may not include a complete house number and street
name address. The majority of noncity-style addresses are located in
the more sparsely settled areas of the United States; however, they
may exist in small- or medium-sized towns as well. Frequently used
noncity-style mailing addresses include:
8
•
General delivery.
•
Rural route and box number.
•
Highway contract route and box number.
•
Post Office box only delivery.
Option 3–Non-Title 13 Local Address List Submission MTPS
Chapter 2: Before You Begin Your Review
Noncity-style addresses often do not follow any numeric sequence,
and may not be associated with the name of the street or highway on
which they are located. For this reason, the Census Bureau uses
different methods to compile the list of addresses for inclusion into the
address list, such as location descriptions (BRICK HSE
w/ATTACHED GARAGE ON RIGHT), structure points (geographic
coordinates), and census geographic codes (state code, county code,
census tract number, census block number).
Census Tract
Census tracts are small, relatively permanent statistical subdivisions of a
county or statistically equivalent entity, delineated for presenting Census
Bureau statistical data.
The proposed criteria for census tracts for the 2010 Census are that they
contain a minimum of 1,200 people with an optimal population of 4,000.
Census tract boundaries are delineated with the intention of being stable over
many decades, so they generally follow relatively permanent visible features.
However, they may follow governmental unit boundaries and other nonvisible features in some instances. Census tract boundaries never cross state
or county (or statistically equivalent entity) boundaries.
Each census tract is uniquely numbered within a county and contains
numerous census blocks. Census tract numbers contain up to a 4-digit
number followed by a decimal point and a 2-digit number for suffixed tracts,
e.g., 1234.01. For census tracts without a suffix, the number will contain a
period with zero fill, e.g., 4567.00. Leading zeros are not shown on Census
Bureau materials.
Census Block
A census block is an area bounded by visible features such as streets, roads,
streams, and railroad tracks and nonvisible features such as the boundaries of
governmental units and other legal entities. A block is the smallest
geographic area for which the Census Bureau collects and tabulates statistical
data.
Census blocks may look like a city block or may be large and irregularly
shaped, depending upon features. The boundary of a state or a county is
always a block boundary.
Census blocks are numbered within census tracts and are unique to the census
tract to which they belong. Census block numbers consist of 4-digits, and
may include a single alpha character suffix reflecting a boundary change or
added feature (e.g. 3001A and 3001B).
NOTE: The 2010 Decennial Census LUCA Program addresses are coded to
current census block/geography.
Option 3–Non-Title 13 Local Address List Submission MTPS
9
Chapter 2: Before You Begin Your Review
What is Geocoding?
In order to process your address submissions, the Census Bureau requires the
inclusion of census geographic code information. This link to census
geography is referred to as geocoding. Geocoding places an individual
address in its correct geographic location, which includes the correct state,
county, census tract, and census block codes.
Because the Census Bureau counts people where they live, census geographic
code information or geocodes support the systematic collection of data that
allows Census enumerators to locate an address. They are also important in
allocating data from questionnaire responses to the correct location. You
must include census geographic code information for the Census Bureau to
process your address submissions. The Census Bureau will not accept
addresses without census geographic codes (geocodes) including the state,
county, census tract, and census block codes.
You can find these census geographic codes on your LUCA materials.
Strategies for Reviewing the Census Bureau’s Address Count List
You must decide for yourself how to conduct the LUCA program review.
Consider your available time, the information you have readily available, and
the staff and computer resources you have. If resources are limited, the
Census Bureau recommends focusing on areas where addresses are more
likely to be missed or incorrect. For example:
•
Areas of new housing construction.
•
E-911 address conversion areas.
•
Areas that have changed from single-family homes to multifamily
homes and vice versa.
•
Warehouses that have been converted to residential lofts.
•
New mobile home parks or new scattered mobile homes.
•
Apartment buildings with irregular or missing numbering schemes for
the individual units.
•
Recently added territory.
•
Addresses near jurisdictional boundaries.
Local Address Sources
There are many possible sources of local address information. Differences in
your count of residential addresses and the Census Bureau’s count of
addresses are a good indication of where change is taking place and can help
you identify addresses that you need to add to your local address list. The
following list provides suggestions for local address source materials:
10
Option 3–Non-Title 13 Local Address List Submission MTPS
Chapter 2: Before You Begin Your Review
•
•
•
•
•
•
•
•
•
New housing construction or building permits (include units that are
under construction only if final roof, doors, and windows will be in
place on Census Day, April 1, 2010).
E-911 address files.
Housing occupancy permits.
Planning or zoning records.
Local utility records.
Drivers’ license files.
Annexation records.
Assessment or taxation files.
Voter registration files.
Option 3–Non-Title 13 Local Address List Submission MTPS
11
CHAPTER 3
CENSUS SUPPLIED MATERIALS
Introduction
The MAF/TIGER PARTNERSHIP SOFTWARE (MTPS) Version 2.1
The MTPS Computer Based Training (CBT)
Address Count List File
Address List Template
Shapefiles
Other Files and Software
Setup File
Readme.txt File
The MTPS LUCA User Guide
Zip Software
Adobe® PDF Reader Software
Adobe® Flash Software
Introduction
The Census Bureau supplies the following materials:
1) One (1) MTPS CD:
•
The MTPS Application.
•
The MTPS CBT.
2) One (1)* or more data CDs that may contain the following
information:
•
Address Count List.
•
Address List Template
•
Shapefiles.
•
Setup File.
•
Readme.txt File.
•
The MTPS LUCA User Guide.
•
Zip Software.
•
Adobe® PDF Reader Software.
•
Adobe® Flash Software.
* The number of data disks depends on the size of your jurisdiction.
The MAF/TIGER Partnership Software (MTPS) Version 2.1
The MTPS is a user-friendly GIS software, written specifically for Census
geographic program participants, that is ready to load with the address count
list and shapefiles for your jurisdiction. Note the licensing agreement that
limits use of the MTPS to Census Bureau programs; it will
12
Option 3–Non-Title 13 Local Address List Submission MTPS
Chapter 3: Census Supplied Materials
appear on the screen when you open the software. Do not distribute the
software beyond your LUCA staff.
The MTPS Computer Based Training (CBT)
The MTPS CBT is a step-by-step guide that helps you learn how to use the
MTPS for your LUCA review. We strongly advise you to review the CBT
before you begin using the application.
Address Count List File
The address count list file contains the number of residential addresses for
each census block within your jurisdiction.
Address List Template
The address list template contains the Census Bureau’s predefined address file
format that you may use to import your local address file for submission.
Shapefiles
Shapefiles contain the location and attributes of physical features. They are
created using the Census Bureau’s Topologically Integrated Geographic
Encoding and Referencing System (TIGER®) and allow participants to submit
digital updates to map features. Shapefiles require the use of a GIS
application such as the MTPS.
Other Files and Software
Setup File
The setup file contains the geographic information that the MTPS requires
in order to load the data disks.
Readme.txt File
The readme.txt file contains descriptive information about the software
and the files and provides instructions on how to use them.
The MTPS LUCA User Guide
This is a step-by-step guide to learn how to use the MTPS for your LUCA
review.
Zip Software
Zip software is included on the standard data disk for your address list
submission. The MTPS will automatically zip and encrypt your updated
map files.
Adobe® PDF Reader Software
Adobe® PDF Reader Software allows a user to view Adobe® Portable
Document Format (PDF) files. The LUCA User's Guide and the
MAF/TIGER Partnership Software User's Guide are in Adobe® PDF
format.
Option 3–Non-Title 13 Local Address List Submission MTPS
13
Chapter 3: Census Supplied Materials
Adobe® Flash Software
Adobe® Flash Player is software that allows you to view Web content
created by Flash. This content may be interactive such as menus that
slide, or it may consist of complex applications, games, or animations.
Many Web browsers (Internet Explorer, for example) install Flash Player
automatically. The MAF/TIGER Partnership Software Computer Based
Training (CBT) is in Flash format. If the CBT does not run on your Web
browser, you may need to install the Adobe® Flash player.
14
Option 3–Non-Title 13 Local Address List Submission MTPS
CHAPTER 4
THE CENSUS BUREAU’S ADDRESS COUNT LIST
Introduction
The Address Count List
Introduction
The Census Bureau’s Address Count List file for your jurisdiction is included
on your data CD-ROM and is provided for reference purposes only. This
chapter discusses the file format.
The Address Count List
The address count list contains the number of housing unit and group quarter
addresses on the Census Bureau’s Address List for each census block within
your jurisdiction. Use this list to identify inconsistencies between the Census
Bureau’s housing unit and/or group quarters address counts and your housing
unit and/or group quarters address counts. This list is provided for reference
purposes only.
The Entity ID Code, a unique identification number (maximum character
length is 12 characters) assigned by the Census Bureau to each entity, is listed
at the top of the address count list.
Entity
Entity Identification Code
State
County
Place
Minor Civil Division
(MCD)
ST (2 alpha) + (2 numeric)
CO (2 alpha) + State (2 numeric) + County (3 numeric)
PL (2 alpha) + State (2 numeric) + FIPS Place (5 numeric)
MC(2 alpha) + State (2 numeric) + County (3 numeric) +
FIPS MCD (5 numeric)
Total
Characters
4
7
9
12
Each block record in the address count list file contains eight (8) fields of
information. The character length of each record may vary. The header
displays the field names for each data column in the file:
1. State–2-digit current state code for your jurisdiction. This field is
prepopulated.
2. County–3-digit current county code for your jurisdiction. This field is
prepopulated.
3. Tract–Contains up to a 4-digit number followed by a decimal point
and a 2-digit number for suffixed tracts, e.g., 1234.01. For census
tracts without a suffix, the number will contain a period with zero fill,
e.g., 4567.00. This field is prepopulated.
4. Block–Contains a 4-digit number plus one alpha character, if
applicable, e.g. 3001a. This field is prepopulated.
Option 3–Non-Title 13 Local Address List Submission MTPS
15
Chapter 4: The Census Bureau’s Address Count List
5. Census HU Count–Census Bureau’s most recent count of housing
unit addresses. This field is prepopulated.
6. Local HU Count–blank field
Census GQ Count–Census Bureau’s most recent count of group
quarters addresses. This field is prepopulated.
7. Local GQ Count–blank field.
16
Option 3–Non-Title 13 Local Address List Submission MTPS
CHAPTER 5
SETTING UP THE MAF/TIGER PARTNERSHIP SOFTWARE (MTPS) FOR
LUCA REVIEW
Introduction
Installing the MTPS
Starting the MTPS
Completing the MTPS Computer Based Training (CBT)
Beginning the LUCA Review with the MTPS
Overview of Toolboxes and Buttons
Additional Resources
LUCA Program Help Desk
LUCA Technical Help Desk
LUCA Website
Introduction
The MTPS is a user-friendly application designed to read LUCA data disks
and to record map updates in a format ready to be submitted to the Census
Bureau.
Installing the MTPS
To install the MTPS, please follow these instructions:
1) Start Windows.
2) Insert the Program CD in your CD-ROM drive.
3) Select the Run command from the Start menu. Type the location of
your CD-ROM drive and the word “setup” (for example, type
d:\setup).
OR
Select the Run command from the Start menu. Use the Browse icon
to locate the setup file.
4) Click OK. The installation program will appear on your screen.
5) On the Welcome screen, click Next.
6) Click Yes to accept the Software License Agreement.
7) On the Select Installation Type window, accept the default option,
“Install MAF/TIGER Partnership Software and Data for a Single Use.”
Click Next.
8) The setup program guides you through the installation process. Accept
the default settings.
9) Once the program has been installed, insert the first Data CD into your
CD-ROM drive. (Most data sets will fit on one (1) CD.) Click OK
when prompted.
10) Click Finish.
11) On the next window, select “Yes, I want to restart my computer now.”
12) Click Finish to complete the setup.
Option 3–Non-Title 13 Local Address List Submission MTPS
17
Chapter 5: Setting up the MAF/TIGER Partnership Software (MTPS) for LUCA
Review
Starting the MTPS
To start the MTPS, please follow these instructions:
1) Select Programs from the Start menu.
2) Select MAF/TIGER Partnership Software > MAF/TIGER Partnership
Software 2.1.
3) Enter a User Name and Password (You should have received this
information under separate cover. If not, contact your local Regional
Office and they will provide it to you.)
4) Click OK when prompted to install the data files.
5) Update the LUCA participant’s information, if necessary.
6) Select one of two options:
•
To complete the training on CD-ROM, select “Run the
MAF/TIGER Partnership Software Computer Based Training”.
(Please refer to the Completing the Computer Based Training
(CBT) section below.)
OR
•
To launch the application, select “Go directly to the MAF/TIGER
Partnership Software program.”
Completing the MTPS CBT
The MTPS CBT is a self-paced tutorial that provides instructions on how to
use the MTPS application for several Census Bureau geographic programs.
The opening screen shows a total of eight (8) tutorials:
1) Three (3) General Skills tutorials:
•
Basic Skills.
•
Additional Skills.
•
Editing Linear Features, Area Features, and Landmarks.
2) Five (5) tutorials specific to Census Bureau geographic programs:
18
•
LUCA (Local Update of Census Addresses)
•
BAS (Boundary and Annexation Survey).
•
PSAP (Participant Statistical Area Programs).
•
VTD/BBSP (Voting Districts/Block Boundary Suggestion
Program).
•
SDRP (School District Review Program).
Option 3–Non-Title 13 Local Address List Submission MTPS
Chapter 5: Setting up the MAF/TIGER Partnership Software (MTPS) for LUCA
Review
NOTE: This user guide provides instructions for the LUCA module of
the MTPS and in addition, contains instructions for the BAS module in
Appendix G. If you find that the boundaries for your jurisdiction do not
depict the correct current location, you may submit boundary updates
using the MTPS as instructed in Appendix G.
In the future, if you elect to participate in BAS, PSAP, VTD/BBSP, or
SDRP, you will have the option to use the MTPS for these programs.
NOTE: All of the examples shown in this user guide and in the MTPS
CBT were created with fictitious data that are not applicable to your
jurisdiction, and do not contain any Title 13 information.
Beginning the LUCA Review with the MTPS
1) Open the MTPS application. The Please Log In dialog box will open.
2) Enter a User Name and Password (the Census Bureau will provide
this information to you under separate cover).
3) Select LUCA from the main menu.
4) Click Open. This will display the LUCA toolbox and two (2)
windows:
a. LUCA Map.
b. LUCA Address Count List.
Option 3–Non-Title 13 Local Address List Submission MTPS
19
Chapter 5: Setting up the MAF/TIGER Partnership Software (MTPS) for LUCA
Review
The map shows an overview of county and places. Also shown is
the Census Bureau’s Address Count List.
The MTPS allows you to combine the review of the maps and the address
count list for your geographic area. The map and the address count list are
linked. If you are working from the map, selecting a block on the map
automatically selects and displays the corresponding block on the address
count list.
The address count list is sorted by tract/block. For other sorting options,
see the MTPS Help menu.
Census blocks and census tracts are identified with numeric labels on the
map. State codes, County codes, American Indian Area codes, and
Incorporated Place codes are not shown on the map. Use the Information
buttons described on page 24 to locate the codes for any given feature.
The MTPS has a simple legend. All line features are drawn first and are
the same thickness. Census block, census tract, county, American Indian
Area, and incorporated place symbols are displayed over the feature lines.
20
Option 3–Non-Title 13 Local Address List Submission MTPS
Chapter 5: Setting up the MAF/TIGER Partnership Software (MTPS) for LUCA
Review
Toggle the Legend button
show or hide the legend.
on the Standard Toolbox (page 27) to
Overview of Toolboxes and Buttons
The MTPS has several toolboxes, each of which contains numerous buttons.
This section is an overview of their functions. Keep in mind that you will not
need to use all of them. Chapter 7 describes in more detail how to use the
toolboxes and buttons required to complete your LUCA review. For more
information on any of these toolboxes and buttons, refer to the MTPS Help
section.
Main Menu
The system loads this menu by default when you open the MTPS, and the
Main Menu remains open.
Select Map to access:
•
Layers: to add, hide, drop, or move map layers.
•
Scale: to modify the map scale displayed on the computer screen.
•
Previous Scale draws the map to the extent that was used before
the most recent change. Initial Scale draws the map to the extent
that was used when the map was created or last saved.
•
Locator: to create a window that shows your location within the
overall area.
•
Bookmarks: to create and manage bookmarks.
Select Selection on the Main Menu to access:
•
Settings: to change the status and labels of map layers.
•
Select: to build queries by Condition, List, Value, or Location.
See Appendix H.
Select Tools on the Main Menu to access:
•
Imagery: to load aerial images, topographic maps, or urban color
images from TerraServer USA toolbox.
Option 3–Non-Title 13 Local Address List Submission MTPS
21
Chapter 5: Setting up the MAF/TIGER Partnership Software (MTPS) for LUCA
Review
•
Export: to convert features to a different geographic format.
Select LUCA on the Main Menu to access:
•
LUCA Toolbox: to turn the LUCA Toolbox on and off.
•
Editing Toolboxes: to edit lines, areas, and points.
•
Default Display: to restore the computer screen to the original
layout when the MTPS is opened.
•
Verify: to validate your edits.
•
Report Changes: to create a ZIP file of your edits.
•
Update Address Data: to import an address list (Option 1
participants only).
•
Update User Information: to make changes on the participant’s
information window.
The Standard Toolbox
The Standard toolbox is used to perform general tasks. This toolbox is
loaded by default when you open the MTPS and remains open. It is
located directly below the Main Menu, and can be docked and undocked:
•
Target Layer: to set the layer that is going to be
edited
.
•
Dataview: to see a list of records selected
•
Map Layers: to add, hide, drop, or move map layers
•
Legend: to show or hide the map legend
•
Layer Style: to change layer symbols
•
Automatic Labels: to create label styles
•
Set the Map Scale: to set the scale of the map on the computer
screen
.
.
.
.
.
.
The Tools Toolbox
The Tools toolbox is used to navigate the map. This toolbox is loaded by
default when you open the MTPS (if you close the Tools toolbox
22
Option 3–Non-Title 13 Local Address List Submission MTPS
Chapter 5: Setting up the MAF/TIGER Partnership Software (MTPS) for LUCA
Review
accidentally, you can open it again by selecting Tools from the menu
toolbar on the main menu then clicking on Toolbox).
•
The Pan and Zoom buttons are used to navigate around the map:
o Zoom In and Zoom Out buttons
o Pan button
.
.
NOTE: Every time you open the MTPS the map will display the
geographic extent you viewed before closing the application.
NOTE: The labeling of the features depends on the scale of the map
view: the further you zoom into the map, the more labels you will see.
•
The Scale buttons are used to go back to the Previous Scale
.
the Initial Scale
•
or
The Information button
is used to display the fields of the
address records. Select a line to display its attributes. The
buttons display multi-layer and multi-layer area information,
respectively.
•
The Measuring buttons are used to Measure Distance
Measure Size
or
.
Option 3–Non-Title 13 Local Address List Submission MTPS
23
Chapter 5: Setting up the MAF/TIGER Partnership Software (MTPS) for LUCA
Review
The LUCA Toolbox
The LUCA toolbox is used as a navigation tool. It is loaded by default
when you open the MTPS (if you close the LUCA toolbox accidentally,
you can load it again by selecting LUCA on the menu toolbar and then
clicking on LUCA toolbox).
Click on the Pick Block
icon. Select the One Block Only box
, and using the mouse click inside one census block on the
map. The related census block records on the address count list are
displayed.
NOTE: The information shown in the S (State), C (County), T (Tract),
and B (Block) boxes will be the block you selected on the map and the
associated state, country, tract and block codes. The dropdown menus for
these boxes can also be used to select a particular block.
•
icon to zoom in and center the
Click on the Zoom to Block
map on the selected block; click on the Zoom to the Entire Map
icon to show the entire geographic extent of the map.
Other LUCA Toolbox Icons
Other LUCA toolbox icons include:
•
Create a Block Layout
and Create a Multiple Block Layout
.
•
are not used for this phase of
Structure Point icons
LUCA Review. (Structure points will be available for the LUCA
feedback phase of the program for Option 1 and Option 2
participants.)
NOTE: The LUCA Toolbox remains in the same place on the screen
unless you move it or close it. The Tools Toolbox and the Line Editing
Toolbox disappear from the screen when you are working with the address
count list but reappear when you click on the map.
The Line Editing Toolbox
The Line Editing toolbox is used to edit road features. This toolbox is not
loaded by default when you open the MTPS. To open it, click on Line
Editing under LUCA on the main menu.
24
Option 3–Non-Title 13 Local Address List Submission MTPS
Chapter 5: Setting up the MAF/TIGER Partnership Software (MTPS) for LUCA
Review
Refer to Chapter 7 for additional line editing instructions.
•
Click on the Add Line
icon to add a line. Click on the start of
a new line, drag the mouse to the end of the line and double-click.
(Click at intermediate points on the line when necessary to make it
smooth).
•
Click on Delete Line
•
Click on the Split Line
want to split the line.
•
Click on Cancel Edits
to undo the most recent action or Save
Edits
, to save your work.
then click on a line segment to delete it.
to split a line then click where you
Other Line Editing Toolbox Icons
Other Line Editing toolbox icons:
•
Copy and Delete Line
•
Edit Line Attributes, Display Alternate Names, and Display
Alternate Addresses
•
and Replace Copied Line
.
.
Show Right/Left Direction Arrows
are toggle icons that
alternatively show or hide the arrows (click again to Hide
Right/Left Direction Arrows)
.
Bookmarks
The MTPS allows you to save a particular map extent as a bookmark.
You can zoom in to it at any time.
Click Bookmarks from the Map menu. Click Create.
Option 3–Non-Title 13 Local Address List Submission MTPS
25
Chapter 5: Setting up the MAF/TIGER Partnership Software (MTPS) for LUCA
Review
Type a name in the Create Bookmark window. Click OK.
Click on the name of the bookmark you created to go back to the map
extent you bookmarked. The MTPS will zoom to that map extent.
Additional Resources
The MTPS Computer-Based Training (CBT)
You may have the MTPS and the CBT open at the same time while you
are completing your training, or for reference purposes.
The MTPS Help Menu
The MTPS Help Menu provides a variety of options for finding
information on a particular topic.
26
Option 3–Non-Title 13 Local Address List Submission MTPS
Chapter 5: Setting up the MAF/TIGER Partnership Software (MTPS) for LUCA
Review
1) Select Help from the main menu and then click Contents. The screen
on the left shows a list of topics. At the bottom of the right screen you
can select either the link to the MTPS Basic Skills Help or the link to
Census Program Help:
2) Select the Index tab on the left side and the following screen will
display:
Option 3–Non-Title 13 Local Address List Submission MTPS
27
Chapter 5: Setting up the MAF/TIGER Partnership Software (MTPS) for LUCA
Review
3) Select the Search tab on the left screen and the following screen will
display:
4) Select a word from one of the lists in the left column or type a word
into the search box.
LUCA Program Questions
If you have questions concerning the LUCA geographic program, please
call your local Regional Office toll free at 1-866-511-LUCA (5822).
LUCA Technical Help Desk
If you have questions concerning the MTPS and the electronic data, please
call the LUCA Help Desk toll free at 1-866-919-LUCA (5822).
LUCA Website
Visit the Census Bureau’s LUCA Web site at
for additional
information.
28
Option 3–Non-Title 13 Local Address List Submission MTPS
CHAPTER 6
SUBMITTING YOUR LOCAL ADDRESS LIST
The Predefined Computer-Readable Address List File Format
The Address Template
Creating the Address List File CD
Shipping Your Local Address List to the Census Bureau
The Predefined Computer-Readable Address List File Format
You must submit your local address file containing residential city-style
address only in the predefined format as shown below. The Census Bureau
will only accept address files submitted in this format. Noncity-style
addresses will not be accepted or processed.
The predefined file format contains 17 fields of information with a maximum
of 361 characters for each address record.
FIELD
NUMBER
MAXIMUM
CHARACTER
LENGTH
1
12
Entity ID Code
2
3
2
3
State Code
County Code
4
7
Census Tract Number
5
5
Census Block Number
6
7
1
35
8
3
9
2
10
11
12
14
100
14
13
2
14
3
15
100
Group Quarters Flag
House Number
Street Name Prefix
Qualifier
Street Name Prefix
Direction
Street Name Prefix Type
Street Name
Street Name Suffix Type
Street Name Suffix
Direction
Street Name Suffix
Qualifier
Group Quarters Name
16
53
Apartment/Unit Number
17
5
City-style Mailing ZIP
Code
FIELD NAME
DESCRIPTION/NOTES
Unique number assigned by the Census Bureau to each
entity
2-digit Current State Code
3-digit Current County Code
Up to 4-digit Census Tract Number, plus 2-digit number
suffix, if applicable, includes a period for suffixed tracts. If
no suffix, includes period and zero fill, e.g. 5432.00
4-digit Current Census Block Number, plus 1-digit alpha
character suffix, if applicable
Display a ‘Y’ if the unit is a group quarters
Housing unit’s or group quarters’ assigned house number
e.g. EXT, ALT, BUS, OLD
e.g., N, W, SE
e.g., HWY, RT, US
Full street or road name
e.g., ST, CT, AVE, DR
e.g., N,W, SE
e.g. EXT, ALT, BUS
Name of group quarters (Dobbs Hall-University of Dobbs)
Within structure descriptor or identifier, such as APT 5 or
1st FL FRNT
5-digit ZIP Code for city-style mailing addresses
Option 3–Non-Title 13 Local Address List Submission MTPS
29
Chapter 6: Submitting Your Local Address List File
The Address Template Record Layout File
An address template is included on your CD-ROM. If you choose, you
may use this template to import your local address file for submission.
The name of this file is: AddressListTemplate.txt
Follow these instructions:
•
Create a new directory or new folder on your computer hard drive.
Copy the file from the CD-ROM into that directory or folder.
•
When you open the text file with your application program,
provide the application with the following:
o
o
o
o
•
Fields are delimited.
Delimiter is pipe. ( | )
Text qualifier is none.
All field types are text.
Be sure that the required address information is in the appropriate
field as listed below for each address record. (Your Entity ID can
be found on your LUCA materials.)
NOTE: All address records must contain census geographic codes
including the state code, county code, census tract number, and
census block number. The Census Bureau will not accept
addresses without census geographic codes.
1.
2.
3.
4.
5.
6.
Entity ID Code
State Code
County Code
Census Tract Number
Census Block Number
Group Quarters Flag, if applicable:
a.
Enter a “Y” in the Group Quarters Flag field for a
group quarters address.
b.
Add the name of the group quarters in the Group
Quarters Name field.
NOTE: If you enter a “Y” in the Group Quarters
Flag field, you must provide a group quarters name in
the Group Quarters Name field. The Census Bureau
will not process an identified group quarters address
record without a group quarters name.
7. House Number
8. Street Name Prefix Qualifier
9. Street Name Prefix Direction
10. Street Name Prefix Type
30
Option 3–Non-Title 13 Local Address List Submission MTPS
Chapter 6: Submitting Your Local Address List File
11.
12.
13.
14.
15.
Street Name
Street Name Suffix Type
Street Name Suffix Direction
Street Name Suffix Qualifier
Group Quarters Name, if applicable:
•
Verify that the Group Quarters Flag field displays a
“Y.” The Census Bureau will not process an identified
group quarters address record without a group quarters
name.
16. Apartment/Unit Number, if applicable:
•
If you have multiunit structures (apartments,
condominiums, etc.) listed in your address file or need
to add these addresses, use the following guidelines for
identifying individual units:
a. Enter the unit designation (e.g., APT 5, UNIT 103)
in the Apartment/Unit Number field, if known.
b. If the apartment/unit designators are unknown, but
you know the number of units at the multiunit
structure, enter “*#”in the Apartment/Unit
Number field for each unit added.
The “*” character will alert the Census Bureau that
the actual unit identifiers are unknown and that we
need to obtain further information during our field
check of the address. The “#” is the sequential
number, i.e., 1,2,3,4, etc.
For example, the new multiunit structure located
505 Wells Blvd, contains 20 units. You don’t know
the actual individual unit numbers or designators
but you know there are 20 units:
i. Create 20 records with the correct census
geographic codes (i.e., state code, county
code, census tract number, census block
number) and the street address, 505 Wells
Blvd.
ii. For each unit added at 505 Wells Blvd, enter
in sequence, the appropriate “*#” in the
Apartment/Unit Number field.
For example, for the first unit added at 505
Wells Blvd, enter “*1” in the
Apartment/Unit Number field; for the
second unit record added, enter “*2” in the
Option 3–Non-Title 13 Local Address List Submission MTPS
31
Chapter 6: Submitting Your Local Address List File
Apartment/Unit Number field, and so on,
until you get to the twentieth unit record,
where you enter “*20” in the
Apartment/Unit Number field.
17. City-style Mailing ZIP Code
Save your address list file as a pipe-delimited, ASCII text file. (If you
need further instruction on saving a pipe-delimited, ASCII text file,
please call the Help Desk toll free number at 1-866-919-5822.)
Name the file containing your local address list
XXyyyyyyyyyy_LUAL.txt (XXyyyyyyyyyy is your entity identification
code found on your LUCA materials.)
Creating Your Local Address List File CD
•
Burn your Local Address File onto a CD.
NOTE: If you are also submitting shapefiles, you may burn all of
your files to one (1) CD. See the section, Creating the Changes
File
•
Make a copy of the CD:
o Keep one CD as a temporary backup copy for your records and
to use during the feedback phase of the LUCA program.
o Send the other CD to the Census Bureau.
Shipping Your Local Address List to the Census Bureau
•
Include the Inventory Form (Appendix A) with your returned
materials.
•
Double wrap your address list file CD.
•
Address all envelopes, mailing boxes, etc. to:
ATTN: Geography
U.S. Census Bureau
Address for your Census Bureau Regional Office
See Appendix G for a list of Regional Offices.
•
Use the prepaid, preprinted FedEx label provided to you, if FedEx
service is available in your area.
•
Use any shipping company that provides tracking services such as
U.S. Postal Service (USPS), FedEx, United Parcel Service (UPS),
or similar service.
Contact you Census Bureau Regional Office toll free at 1-866-511-5822 if
you have questions about submitting your materials for the LUCA
program.
32
Option 3–Non-Title 13 Local Address List Submission MTPS
CHAPTER 7
UPDATING CENSUS BUREAU SHAPEFILES
Introduction
Reading a Census Bureau Map
Examples of Map Updates
Map Example 1: Adding a New Street
Map Example 2: Correcting a Street Name
Map Example 3: Moving a Street
Map Example 4: Deleting a Street
Creating the Shapefile Changes File
Creating the Shapefile Changes File CD
Shipping the Shapefile Changes CD to the Census Bureau
Introduction
The Census Bureau has provided you with a digital shapefile to review in
conjunction with the address count list. Use the shapefile to submit any
needed updates or corrections to your jurisdiction’s features.
The spatial map updates you provide will allow the Census Bureau to update
the TIGER® database so that all subsequent spatial map and address list
products reflect these changes.
Reading a Census Bureau Map
The Census Bureau map shows some of the same information found on a
typical road map, such as streets and roads, water features, and legal
boundaries. However, the Census Bureau map displays this information using
symbols unique to the Census Bureau. The maps display the following
information:
•
Boundaries.
•
Streets and roads and their names.
•
Water features and their names, if any.
•
Other features and their names, if applicable.
•
Jurisdiction codes and jurisdiction names and adjacent areas.
•
Census block boundaries and numbers.
•
Census tract boundaries and numbers.
icon on the Standard menu to
Click on the Show or Hide the Legend
display the map legend showing the symbols used on the maps.
Option 3–Non-Title 13 Local Address List Submission MTPS
33
Chapter 7: Updating the Census Bureau Shapefiles
Examples of Map Updates
•
Adding a new street.
•
Correcting a street name.
•
Moving a street.
•
Deleting a street.
NOTE: Edits to features on the map must be saved manually. See the
Cancel Edits and Save Edits buttons described below.
Map Example 1: Adding a New Street
During your review, you may find streets that are partially or entirely
missing from the maps.
For example, Heekin Ave is a new street with newly constructed housing
units in census tract 9704 and census block 1304.
Click the Add Line
button on the Line Editing toolbox. Click on the
starting point for Heekin Avenue, and drag the mouse to the end of the
avenue, adding points as needed to define the shape. Double click to end
the line.
34
Option 3–Non-Title 13 Local Address List Submission MTPS
Chapter 7: Updating the Census Bureau Shapefiles
A table will pop up for inserting the following information.
1) MAF/TIGER Feature Class Code-Click to the right of the MTFCC
title (See Appendix C) and a pop-up table to select from will appear.
2) Full Feature Name-Enter the feature name, including any qualifiers
such as prefixes or suffixes and street types. If the feature does not
have a name, select the + sign, and unnamed features will display.
NOTE: The MTPS software automatically assigns a sequential number
for each dataview you open; the first is Dataview1, the second is
Dataview2, and so on. The numbers are labels and have no meaning.
Click Save Edits
and the feature name will appear on the map.
Option 3–Non-Title 13 Local Address List Submission MTPS
48
Chapter 7: Updating the Census Bureau Shapefiles
Map Example 2: Correcting a Street Name
The map shows HOWARD ST instead of the correct name, BROWARD
ST
•
From the Line Editing toolbox, click the Edit Line Attributes
icon. Then click on the road feature you want to correct. A
dataview with the attributes for that line will pop up on your
screen:
49
•
Enter the correct name in the FULLNAME field:
•
button on the Line Editing toolbox. The
Click the Save Edits
name will be corrected on the map.
Option 3–Non-Title 13 Local Address List Submission MTPS
Chapter 7: Updating the Census Bureau Shapefiles
•
Repeat for each line to be corrected (in this example, from Oak
Street to California Street as well as from California Street to
Idaho Street).
Map Example 3: Moving a Street
The Census Bureau map shows Caitlin Ct located in census block 1006.
Actually, Caitlin Ct is located in census block 1007.
•
Click the Copy and Delete
button on the Line Editing
Toolbox. Click on Caitlin Ct to select the line. The line will turn
red as illustrated in the following figure.
•
Click the Replace Copied Line
button on the Line Editing
toolbox. Click at the beginning of the replacement line, drag it to
the end and double click.
•
button on the Line Editing toolbox. The
Click the Save Edits
original street will show as a red dashed line. The new line will
carry all the attributes of the original line.
Option 3–Non-Title 13 Local Address List Submission MTPS
50
Chapter 7: Updating the Census Bureau Shapefiles
NOTE: The street name may not show up on the new line on the map,
on the Line Editing toolbox,
but if you check Edit Line Attributes
you will see that the name and other attributes have been transferred.
Map Example 4: Deleting a Street
All of the housing units along a portion of McKim Street in census block
1007 have been demolished and this section of the street no longer exists.
51
•
button on the Line Editing Toolbox.
Click the Delete Line
Click on the line to be deleted. The line will turn red:
•
Click the Save Edits
button on the Line Editing toolbox. The
deleted line will show as a red dashed line:
Option 3–Non-Title 13 Local Address List Submission MTPS
Chapter 7: Updating the Census Bureau Shapefiles
Creating the Changes File
•
Select Report Changes from the LUCA dropdown menu.
•
The MTPS prompts you to create a ZIP file of your updates.
o Enter your password.
o The name of the ZIP file will correspond to the Entity ID, and
will contain the phrase “LUCA_xxxxxxxxxxx_Return.”
o If you want to review your changes, use Windows Explorer to
open the ZIP file you created and extract its contents to a folder
on your computer. The MTPS will prompt you to enter a
password. This is the same password supplied by the Census
Bureau at the beginning of the LUCA program.
•
Make two CDs of the Changes File:
NOTE: If you are submitting your local address list file, you may
burn all of your files to one (1) CD. See the section, Creating Your
Local Address List File CD.
o Return one CD to the Census Bureau.
o Keep one CD as a backup copy for your records until the
completion of the LUCA program.
Shipping the Changes File CD
•
Include the Inventory Form (Appendix A) with your returned
materials.
•
Double wrap your returned materials.
•
Address all envelopes, mailing boxes, etc. to:
Option 3–Non-Title 13 Local Address List Submission MTPS
52
Chapter 7: Updating the Census Bureau Shapefiles
ATTN: Geography
U.S. Census Bureau
Address for your Census Bureau Regional Office
See Appendix G for a list of Regional Offices.
•
Use the prepaid, preprinted FedEx label provided to you, if FedEx
service is available in your area.
•
Use any shipping company that provides tracking services such as
U.S. Postal Service (USPS), FedEx, United Parcel Service (UPS),
or similar service.
Contact you Census Bureau Regional Office toll free at 1-866-511-5822 if
you have questions about submitting your materials for the LUCA
program.
53
Option 3–Non-Title 13 Local Address List Submission MTPS
APPENDIX A
INVENTORY FORM
54
Appendix A: Inventory Form
55
Appendix A: Inventory Form
APPENDIX B
MAF/TIGER FEATURE CLASSIFICATION CODES
56
Appendix B: MAF/TIGER Feature Classification Codes
MAF/TIGER Feature Classification Codes
The MTFCC field contains the MAF/TIGER Feature Class Code that
identifies the most noticeable characteristic of a feature. For example,
streets and roads are identified as S1400.
Road Features
MTFCC
S1100
S1200
S1400
S1500
S1630
S1640
S1710
S1720
S1730
S1740
S1750
FEATURE NAME
Interstate Highway or Primary Road with limited access
Primary Road without limited access, US Highway, State Highway, or
County Highway, Secondary and connecting roads
Local Neighborhood Road, Rural Road, City Street
Vehicular Trail (4WD)
Ramp
Service Drive usually along a limited access highway
Walkway/Pedestrian Trail
Stairway
Alley
Private Road for service vehicles (logging, oil fields, ranches, etc.)
Private Driveway
Water Features
MTFCC
H3010
H3013
H3020
FEATURE NAME
Stream/River
Braided Stream
Canal, Ditch or Aqueduct
Railroad
MTFCC
R1011
R1051
R1052
FEATURE NAME
Railroad Feature (Main, Spur, or Yard)
Carline, Streetcar Track, Monorail, Other Mass Transit Rail
Cog Rail Line, Incline Rail Line, Tram
Miscellaneous Features
MTFCC
P0001
L4010
L4020
L4110
L4121
L4031
K2451
L4140
L4165
57
FEATURE NAME
Non-visible Legal/Statistical Boundary
Pipeline
Power Transmission Line
Fence Line
Ridge Line
Aerial Tramway/Ski Lift
Airport or Airfield
Property/Parcel Line
Ferry Crossing
Appendix B: MAF/TIGER Feature Classification Codes
APPENDIX C
SELECTION SETS
58
APPENDIX C
SELECTION SETS
Introduction
Creating a Selection Set
Saving a Selection Set
Deleting a Selection Set
Introduction
A Selection Set is a group of features from a single map layer that you can
highlight on the map in order to display only the records that meet a
certain condition (e.g., blocks that have already been reviewed). The
MTPS allows you to create, update, and delete new geographic layers that
contain only the features you select using the Selection toolbar and the
Selection Sets dialog box. You can save selection sets to store them in the
file so you can use them when you open it again.
Creating a Selection Set
1. Choose the layer whose line or block features you want to select from
the drop-down list on the Standard toolbar:
2. Click Tools from the Main Menu.
3. Click Selection to display the Census Block Selection dialog box:
•
59
button to select a map feature by
Click the Select by Pointing
pointing to it. Click on a single feature on the map. The MTPS
selects the features and highlights the result on the map:
Appendix C: Selection Sets
•
Click the Select by Circle
button to select a map feature by
drawing a circle around it. Draw a circle to select all features
inside it. The MTPS selects the features and highlights the result
on the map.
•
Click the Select by Shape
button to select a map feature by
drawing a shape around it. Draw a shape to select all features
inside it (double-click at the end to finish your sketch). The MTPS
selects the features and highlights the result on the map.
NOTE: Selecting by circle or by shape will only select map features that
are completely contained within the shapes.
NOTE: For more Selection Sets options please search the Help menu.
•
Click the Clear Selection
on the active selection set.
•
Click the Create New Selection
sets:
•
Click the Selection Settings
sets:
button to clear all selected features
button to add more selection
button to symbolize the selection
Appendix C: Selection Sets
60
•
The Selection Sets are named by default but you can rename them
by clicking the Rename button and typing a new name, i.e.,
“Census Block 1000”.
•
Click the Style button to customize the display style. Choose the
border and the fill styles and colors.
•
Click Apply then click OK to save the selection set.
•
Select any map features as described in Step 3.
Saving a Selection Set
When you close the MTPS session, all the selection sets are saved so you
can access them again. The MTPS also saves the style settings of the
selection set(s).
Deleting a Selection Set
•
61
You can delete selection sets that you no longer need to use.
Appendix C: Selection Sets
•
Click the Selection Settings
Sets dialog box.
•
Choose the selection set you want to delete.
•
Click Drop Set. The MTPS prompts you to confirm that you want
to delete the selection set.
•
Click Yes to delete the selection set. The MTPS deletes the
selection set and updates the Selection toolbar and map legend
accordingly.
button to display the Selection
NOTE: You cannot delete the default selection set named "Selection."
•
Close the Selection Sets dialog box.
Appendix C: Selection Sets
62
APPENDIX D
LOCATION DESCRIPTION AND STREET TYPE ABBREVIATION
EXAMPLES
63
Appendix D: Location Description and Street Type Abbreviation Examples
FULL NAME
Alternate Route
Avenue
Blue
Boulevard
Brown
Boarded Up
Circle
County Highway
County Road
Court
Drive
East
Four-Wheel Drive Trail
Freeway
Green
General Delivery
Hospital
Highway Contract Route
House
Interstate
Intersection
Lane
North
Parkway
Post Office Box
Road
Route
Rural Route
South
Star Route
State Highway
State Road
State Route
Street
Thoroughfare
Township Highway
Township Road
West
White
Yellow
With
64
ABBREVIATIONS
ALT
AVE
BL
BLVD
BRN
BU
CIR
CO Hwy
CO Rd
CT
DR
E
4WD
FWY
GR
GEN DEL
HOSP
HCR
HSE
I
INT
LN
N
PKWY
PO BOX
RD
RTE
RR
S
ST RT
ST HWY
ST RD
ST RTE
ST
THFR
TWP HY
TWP RD
W
WHT
YLW
W/
Appendix D: Location Description and Street Type Abbreviation
Examples
APPENDIX E
UNIT DESIGNATION ABBREVIATION EXAMPLES
65
Appendix E: Unit Designation Abbreviation Examples
NAME
Apartment
Basement
Bottom
Downstairs
Floor
Front
Interior
Level
Lower
Middle
Mobile Home
Number
Penthouse
Room
Right
Space
Studio
Suite
Suites
Trailer
Upper
Upstairs
66
ABBREVIATION
APT
BSMT
BOTM
DOWN
FLR
FRNT
INTE
LVL
LOWR
MIDL
MH
#
PH
RM
RGHT
SP
STUD
STE
STES
TRLR
UPPR
UPS
Appendix E: Unit Designation Abbreviation Examples
APPENDIX F
MAF/TIGER PARTNERSHIP SOFTWARE (MTPS)
BOUNDARY AND ANNEXATION SURVEY (BAS) PROCEDURES
67
Appendix F: BAS Procedures
APPENDIX F
BAS PROCEDURES
1.0 Introduction to the Boundary and Annexation Survey
1.1 Overview of the BAS
1.2 Legal Disputes
1.3 Key Dates for BAS Respondents or Participants
1.0 Introduction to the Boundary and Annexation Survey
1.1 Overview of the BAS
The Census Bureau conducts an annual survey called the Boundary and
Annexation Survey (BAS) to collect information about selected legally
defined geographic areas, such as counties (and equivalent areas),
incorporated places, minor civil divisions (MCDs), as well as federally
recognized American Indian reservations, including off-reservation trust
lands and tribal subdivisions. The BAS also provides an opportunity for
participants to review the names and geographic relationships for these
areas. Title 13, U.S. Census Code authorizes this survey.
BAS information is used to provide a record for reporting the results of the
decennial and economic censuses, and to support the Population Estimates
Program and the American Community Survey. Maintaining correct
boundaries and boundary-to-feature relationships through the BAS helps
ensure that the appropriate population is assigned to each entity. In
compliance with the Office of Management and Budget Circular A-16, the
BAS supports the Census Bureau’s spatial data steward responsibilities for
the Federal Geographic Data Committee and the Geospatial One-Stop by
updating the inventory of and boundaries for, governmental units. In
addition, the BAS is the source of up-to-date information on boundaries,
codes, and names for the U.S. Geological Survey’s (USGS) National Map
and the Geographic Names Information System. The BAS is also the
source for changes in the boundary of incorporated places, minor civil
divisions (MCDs), counties (and equivalent areas), and federally
recognized American Indian areas, which include reservations and offreservation trust lands.
1.2 Legal Disputes
If it comes to our attention that areas of land are in dispute between two or
more jurisdictions, we will not make annexations or boundary corrections
until the parties come to a written agreement, or there is a documented
final court decision regarding the matter/dispute. If you have questions
concerning this, please contact the Census Bureau Legal Office at
301-763-2918.
68
Appendix F: BAS Procedures
Appendix F: BAS Procedures
1.3 Key Dates for BAS Respondents or Participants
All changes received by April 1st, will be reflected in the Population
Estimates Program and the American Community Survey. If the Census
Bureau receives your updates by May 31st, they will be included in your
BAS materials next year.
To change your method of participation in BAS from the MTPS to either
paper or Digital BAS, you must notify the Census Bureau by
February 15th. You can contact the Census Bureau by phone at (800)
972-5651 or by email at [email protected].
Appendix F: BAS Procedures
69
Appendix F: BAS Procedures
BAS PROCEDURES
2.0 Viewing and Updating Boundary Data and BAS Forms Using the MTPS
2.1 Logging onto the MTPS
2.2 Computer Based Training (CBT)
2.3 Updating Your Contact Information
2.4 Reviewing and Updating the BAS Forms
2.4.1 Incorporated Place Form
2.4.2 Minor Civil Division (MCD) Form
2.4.3 County Form
2.4.4 American Indian Areas Form
2.5 Opening the Map to Make Boundary Updated in the MTPS
2.6 Customizing the Map View
2.7 Editing the Boundary Data in the MTPS
2.7.1 Map Editing Toolboxes
2.7.2 Boundary Changes Using the BAS Toolbar
2.7.2.1 Creating Boundary Change Polygons
2.7.2.2 Populating the BAS Entity Update Form
2.7.3 Linear Feature Updates
2.7.4 Area Landmark Updates
2.7.4.2 New Landmark
2.7.4.3 Deletion or Deannexation
2.7.4.4 Change Name
2.7.5 Point Landmark Updates
2.7.5.1 Adding a Point Landmark
2.7.5.2 Deleting a Point Landmark
2.0 Viewing and Updating Boundary Data and BAS Forms Using the MTPS
2.1 Logging onto the MTPS
When you installed the MTPS on your computer it was added to the list of
software on the Programs folder in the Start menu. The software can be
initiated by selecting the MAF/TIGER Partnership Software from the
Programs folder.
The program will open and will ask for your username and password.
You will be asked for this username and password each time you sign onto
the program. Select the OK button when you have completed entering
both pieces of information. The program will tell you if the entered
information has an error.
NOTE: The username and password fields are case sensitive. This
means that if the username is uppercase it needs to be entered as such into
the software.
After your username and password is accepted by the program, the data
files that you loaded in the previous step will be indexed so that the
program is able to read and edit them. For this step, the antivirus on your
computer must be turned off. This step will take much longer if it is on.
The time required for indexing the files varies depending on the size and
amount of features in your entity and the surrounding areas.
70
Appendix F: BAS Procedures
Appendix F: BAS Procedures
2.2 Computer Based Training (CBT)
After you have logged onto the MTPS, a window will appear asking you if
you would like to view the CBT or if you would like to go straight to the
update software. The Computer Based Trainings demonstrate how to use
the software to make different types of updates, such as adding a line or
area to your entity.
We strongly recommend that you review the following tutorials in the
CBT before continuing:
•
Creating additions/annexations, deletions/deannexations, and new
entities.
•
Editing linear features.
•
Editing area features.
•
Editing landmark points.
•
Reporting your LUCA changes.
The CBT can be viewed at any time from the Programs folder in the
Start menu. The window asking if you would like to view the CBT will
also appear the next time you log onto the software.
2.3 Updating Your Contact Information
The first time you enter the MTPS, a window will appear asking you to
verify and/or correct the contact information for the person responding to
the BAS. Example 2.3.1 shows an example of the contact information
box.
Example 2.3.1: Participant Information Window
If the contact information for the person completing the submission is
different from what is populated in the form, please type over the incorrect
data. The Census Bureau tries to have complete contact data for each
entity, but if we are missing data, such as a fax number or e-mail address,
please populate the appropriate fields with the information. Click the OK
button in the bottom right corner after you have completed making the
necessary updates.
Appendix F: BAS Procedures
71
Appendix F: BAS Procedures
If you determine the respondent’s contact data is correct and complete,
click the OK button to verify.
The Participant Information window can be viewed at any time while you
are logged on to the MTPS by selecting BAS from the general toolbar and
then selecting Update User Information (see Example 2.3.2).
Example 2.3.2: Opening the Participant Information
window after initial logon
2.4 Reviewing and Updating the BAS Forms
The BAS forms are important because they allow the local participants to
review the geographic relationship information and previously submitted
legal boundary change data. Included in your package is a paper BAS
form. This form is provided only as a reference. The Census Bureau has
developed a unique form for each entity type included in the BAS. There
are four form types: incorporated place, minor civil division (MCD),
county, and American Indian Areas (AIA). Please complete the form
using the MTPS that corresponds to the type of entity you represent.
The forms can be accessed at any time while you are logged on to the
MTPS by selecting BAS from the main toolbar at the top of the screen and
then select Update BAS Startup Forms (Example 2.4.1).
Example 2.4.1: Opening the BAS forms after initial logon
The following subsections will provide an explanation of the necessary
steps to complete each type of form.
2.4.1 Incorporated Place Form
The BAS Form 1 screen shows the name and geographic relationship
information for the place and asks the participant to verify the information.
72
Appendix F: BAS Procedures
Appendix F: BAS Procedures
The following information is provided in the Title and Entity section:
•
Part A lists the incorporated place name, FIPS code, type, and
state.
•
Part B lists the counties that contain the incorporated place.
•
Part C lists the MCDs that contain or correspond with the
incorporated place, if applicable. If your incorporated place is
located in a state where MCDs do not exist or are not active, Part
C will state, “None listed.”
Please review the information provided in the Title and Entity section
(Example 2.4.1.1).
Example 2.4.1.1: Reviewing the first screen of the Place
form
The Modifications section includes questions about the validity of the
information provided in the Title and Entity section. The default answer
to each question is yes.
If you have changes to report for Question a, complete the following
steps:
•
Select the radio button next to No.
•
Key in the correct name and/or type into the appropriate field.
•
Select the calendar under the Effective Date of Change to choose
a date. An effective date is required for all name and type changes,
with the exception of spelling corrections.
Appendix F: BAS Procedures
73
Appendix F: BAS Procedures
If you have changes to report for Question b, complete the following
steps:
•
Select the radio button next to No. This selection will activate
Question c.
•
To add or delete a county or MCD from the list, select the Add
). Multiple rows can be added using this
New Change tool (
tool.
•
After a record has been added, select A for Add or D for Delete
from the Add/Del dropdown and type the name of the county or
MCD that needs to be added or removed from the list in the
appropriate column.
•
If a legal boundary change resulted in your entity being added or
removed from a county or MCD, double click in the field under
Date and select the effective date from the provided calendar. A
date is not required if your entity was listed in the county or place
erroneously.
•
If you add a row and would like to remove it, use the Drop
Change tool (
).
Example 2.4.1.2: Correcting or updating the counties and
MCDs your incorporated place is located within
If your entity supplied the Census Bureau with boundary changes during
) at the bottom
the previous BAS cycle, select the Next button (
of the screen to proceed to the BAS Table Review screen. This screen
displays data submitted for each boundary change that was reported for
your entity during the previous BAS cycle.
NOTE: If your entity did not supply the Census Bureau with any
boundary changes, an OK button will appear at the bottom of the BAS
Form 1 screen. Select the OK button to complete the form review. The
next step to submitting your BAS is to review and update the boundaries
on the maps. Skip to section 2.5 of this document for an explanation on
how to open the BAS map in the MPTS.
On the BAS Table Review screen, please look at each field to ensure that
the data was accurately recorded (Example 2.4.1.3).
74
Appendix F: BAS Procedures
Appendix F: BAS Procedures
Example 2.4.1.3: Reviewing boundary change data
The values that may be present in the Type of Change field are A
(Addition), B (Boundary Correction), D (Deletion), and O (Other).
Table 2.4.1.1 explains the values that may be present in the Auth. Type
field.
CODE
O
R
L
S
X
DEFINITION
Ordinance
Resolution
Local Law
State Level Action
Other Type
Table 2.4.1.1: Auth. Type Codes
If you determine that a field needs to be modified, complete the following
step:
•
Enter the correct data into the white field to the right of the column
that requires the correction. The fields next to Type of Change
and Auth. Type require a value to be chosen from a dropdown
menu. If you wish to make a change to the effective date double
click in the field next to Date and a calendar will appear for you to
choose the correct date. Note: additional fields exist for each
record that are not viewable unless you scroll to the right.
When you have completed reviewing both portions of the form, select the
OK button to complete your form review. The next step to submitting
your BAS is to review and update the boundaries on the maps. Skip to
section 2.5 of this document for an explanation on how to open the BAS
map in the MPTS.
Appendix F: BAS Procedures
75
Appendix F: BAS Procedures
2.4.2 Minor Civil Division (MCD) Form
The BAS Form 3 screen shows information about the Minor Civil
Division and requests the participant to verify the information.
The following information is provided in the Title and Entity section:
•
Part A lists the MCDs name, type, county, and state.
Please review the information provided in the Title and Entity section
(Example 2.4.2.1).
Example 2.4.2.1: Reviewing the first screen of the MCD
form
The Modifications section includes a question about the validity of the
information provided in the Title and Entity section (Example 2.4.2.2).
The default answer is yes.
If you have a change to report for Question a, complete the following
steps:
•
Select the radio button next to No.
•
Key in the correct name and/or type into the appropriate field.
•
Select the calendar under the Effective Date of Change to choose
a date. An effective date is required for all name and type changes,
with the exception of spelling corrections.
Example 2.4.2.2: Updating or correcting the name and type
of your MCD
If your entity supplied the Census Bureau with legal boundary changes
during the previous BAS cycle, select the Next button (
) at the
bottom of the screen to proceed to the BAS Table Review screen. This
76
Appendix F: BAS Procedures
Appendix F: BAS Procedures
screen displays data submitted for each boundary change that was reported
for your entity during the previous BAS cycle.
NOTE: If your entity did not supply the Census Bureau with any legal
boundary changes, an OK button will appear at the bottom of the first
screen. Select the OK button to complete the form review. The next step
to submitting your BAS is to review and update the boundaries on the
maps. Skip to section 2.5 of this document for an explanation on how to
open the BAS map in the MPTS.
On the BAS Table Review screen, please review each field to ensure that
the data was accurately recorded (Example 2.4.2.3).
Example 2.4.2.3: Reviewing legal boundary change data
The values that may be present in the Type of Change field are A
(Addition), B (Boundary Correction), D (Deletion), and O (Other).
Table 2.4.2.1 explains the values that may be present in the Auth. Type
field.
CODE
O
R
L
S
X
DEFINITION
Ordinance
Resolution
Local Law
State Level Action
Other Type
Table 2.4.2.1: Auth. Type Codes
If you determine that a field needs to be modified, complete the following
steps:
•
Enter the correct data into the white field to the right of the column
that requires the correction. The fields next to Type of Change
and Auth. Type require a value to be chosen from a dropdown
Appendix F: BAS Procedures
77
Appendix F: BAS Procedures
menu. If you wish to make a change to the effective date, double
click in the field next to Date and a calendar will appear for you to
choose the correct date. Note: additional fields exist for each
record that are not viewable unless you scroll to the right.
When you have completed reviewing both portions of the form, select the
OK button to complete your form review. The next step to submitting
your BAS is to review and update the boundaries on the maps. Skip to
section 2.5 of this document for an explanation on how to open the BAS
map in the MPTS.
2.4.3 County Form
The BAS Form 2 screen provides a list of the entities located within your
county (Example 2.4.3.1). Please review this list to determine if, as of the
date listed at the top of the screen, all of the entities located within your
county are present on the list, if their status and type are correct, and if
their name is spelled correctly. All active entities will be listed first
followed by, if any, inactive entities.
Example 2.4.3.1: County Form entity list review
If an entity’s name or type is incorrect, complete the following steps:
78
•
Key in the correct name and/or type in the white column to the
right of the applicable column.
•
Enter a date into the Date field by double clicking in the field and
selecting a date from the calendar that appears. An effective date
is required if the change is due to a legal name or type change. If
the change is due to a spelling error, it is not required.
Appendix F: BAS Procedures
Appendix F: BAS Procedures
Example 2.4.3.2: Correcting the spelling of an entity’s
name
If an entity’s status is different from what is present on the list, such as it
disincorporated or the entity never existed in your county, complete the
following steps:
•
Check the appropriate box for the type of change.
•
Enter a date into the Date field by double clicking in the field and
selecting a date from the calendar that appears. All status changes,
other than “Incorporated place or MCD never existed,” require an
effective date to be recorded in the Date field.
Example 2.4.3.3: Changing an entity’s status
If an entity needs to be added to the list, complete the following steps:
•
Press the Add New Change tool (
) at the bottom of the screen.
A line will be added under New Entities and the check box for
New incorporated place or MCD will be checked.
•
Enter the entity’s name and type in the appropriate fields.
•
Enter the effective date of the incorporation or create into the Date
field by double clicking in the field and selecting a date from the
calendar that appears.
Example 2.4.3.4: Adding a New Entity
When you have completed reviewing this table, press the OK button at the
bottom of the window to complete the form review. The next step to
submitting your BAS is to review and update the boundaries on the maps.
Skip to section 2.5 of this document for an explanation on how to open the
BAS map in the MPTS.
2.4.4 American Indian Areas Form
The BAS Form 5 screen shows the name and geographic relationship
information for the American Indian reservation and/or off-reservation
trust land and asks the participant to verify the information.
Appendix F: BAS Procedures
79
Appendix F: BAS Procedures
The following information is provided in the Title and Entity section:
•
Part A lists the name of the American Indian reservation and/or
off-reservation trust land.
•
Part B lists the names of counties located in the American Indian
reservation and/or off-reservation trust land is located.
•
Part C lists the FIPS codes for the reservation/off-reservation trust
lands by state.
Please review the information provided in the Title and Entity section
(Example 2.4.4.1).
Example 2.4.4.1: Reviewing the first screen of the
American Indian Areas form
The Modifications section includes questions about the validity of the
information provided in the Title and Entity section. The default answer
to each question is yes.
If you have changes to report for Question a, complete the following
steps:
•
Select the radio button next to No.
•
Type in the new or correct name into the field below. You must
submit supporting documentation such as a tribal resolution when
reporting a name change.
If you have questions to report for Question b, complete the following
steps:
•
80
Select the radio button next to No. This selection will activate
question c.
Appendix F: BAS Procedures
Appendix F: BAS Procedures
•
To add or delete a county from the list, select the Add New
Change tool (
). Multiple rows can be added using this tool.
•
After a record has been added, select A for Add or D for Delete
from the Add/Del dropdown and type the name of the county and
state that need to be added or removed from the list in the
appropriate column.
•
If a legal boundary change resulted in your entity being added or
removed from a county, double click in the field in the Date
column and select the effective date from the provided calendar. A
date is not required if your entity was listed in the county
erroneously.
•
If you add a row and would like to remove it, use the Drop
Change tool (
).
Example 2.4.4.2: Correcting or updating the counties and
states associated with your reservation/off-reservation trust
lands
If your entity supplied the Census Bureau with legal boundary changes
during the previous BAS cycle, select the Next button (
) at the
bottom of the first screen to proceed to the BAS Table Review screen.
This screen displays data submitted for each legal boundary change that
was reported for your entity during the previous BAS cycle.
NOTE: If your entity did not supply the Census Bureau with any legal
boundary changes, the Next> button will bring you to the Tribal
Subdivisions screen. This will list the tribal subdivisions within your
reservation/off-reservation trust land.
NOTE: If your American Indian reservation and/or off-reservation trust
land did not supply the Census Bureau with any legal boundary change
information during the previous BAS cycle and the Census Bureau does
not have any record of tribal subdivisions for your entity an OK button
will appear at the bottom of the first screen. Press the OK button to
complete your form review. The next step to submitting your BAS is to
review and update the boundaries on the maps. Skip to section 2.5 of this
document for an explanation on how to open the BAS map in the MPTS.
On the BAS Table Review screen, please look at each field to ensure that
the data was accurately recorded (Example 2.4.4.3).
Appendix F: BAS Procedures
81
Appendix F: BAS Procedures
Example 2.4.4.3: Reviewing legal boundary change data
The values that may be present in the Type of Change field are A
(Addition), B (Boundary Correction), D (Deletion), and O (Other).
Table 2.4.4.1 explains the values that may be present in the Auth. Type
field. There are two possible values for the Type Added column: R
(Reservation) and T (Off-reservation trust land).
CODE
A
C
D
N
X
DEFINITION
Act of Congress, Statute, or Federal Law
Federal Court Decision
Deed Placing Land into Trust
Federal Register Notice or Notice
Published in a Local Newspaper by the
Federal Government
Other Type
Table 2.4.4.1: Auth. Type Codes
If you determine that a field needs to be modified, complete the following
step:
•
Enter the correct data into the white field to the right of the column
that requires the correction. The fields next to Type of Change,
Auth. Type, and Type Added require a value to be chosen from a
dropdown menu. If you wish to make a change to the effective
date, double click in the field next to Date and a calendar will
appear for you to choose the correct date. Note: additional fields
exist for each record that are not viewable unless you scroll to the
right.
When you have completed reviewing the BAS Table Review screen, press
the Next>button to continue to the Tribal Subdivisions screen.
82
Appendix F: BAS Procedures
Appendix F: BAS Procedures
NOTE: If the Census Bureau does not have any record of tribal
subdivisions for your entity, an OK button will appear at the bottom of the
first screen. Press the OK button to complete your form review. The next
step to submitting your BAS is to review and update the boundaries on the
maps. Skip to section 2.5 of this document for an explanation on how to
open the BAS map in the MPTS.
The Tribal Subdivisions screen provides a list the tribal subdivisions
located within your reservation/off-reservation trust land (Example
2.4.4.4). Please review this list to determine if, as of the date listed at the
top of the screen, all of the tribal subdivisions located within your
reservation/off-reservation trust land are present on the list, if their type is
correct, and if their name is spelled correctly. The type describes if they
are A (active) or I (inactive). All active subdivisions will be listed first
followed by, if any, inactive subdivisions.
Example 2.4.4.4: Tribal subdivision list review
If a tribal subdivision’s name or type is incorrect, complete the following
steps:
•
Type the correct information in the white column beside name.
You must submit supporting documentation such as a tribal
resolution when reporting a name change.
•
Enter a date into the Date field by double clicking in the field and
selecting a date from the calendar that appears. A change to a
tribal subdivision name requires an effective date. If the change is
due to a spelling error an effective date is not required (Example
2.4.4.5).
Appendix F: BAS Procedures
83
Appendix F: BAS Procedures
Example 2.4.4.5: Correcting the spelling of an entity’s
name
If a tribal subdivision’s status is different from what is present on the list,
such as it has been deleted or the subdivision never existed, complete the
following steps:
•
Check the appropriate box for the type of change.
•
Enter a date into the Date field by double clicking in the field and
selecting a date from the calendar that appears. All status changes,
other than “Tribal subdivision never existed” and “Boundary
correction,” require an effective date to be recorded in the Date
field.
Example 2.4.4.7: Changing an entity’s status
If an entity needs to be added to the list, complete the following steps:
•
Select the Add New Subdivision tool (
) at the bottom of the
screen. A line will be added under New Entities and the check
box for New subdivision will be checked.
•
Enter the entity’s name and type in the appropriate fields.
•
Double click in the Date field to select the effective date of the
creation.
Example 2.4.4.8: Adding a New Entity
When you have completed reviewing this table, press the OK button at the
bottom of the window to complete the form review. The next step to
submitting your BAS is to review and update the boundaries on the maps.
Skip to section 2.5 of this document for an explanation on how to open the
BAS map in the MPTS.
2.5 Opening the Map to Make Boundary Updates in the MTPS
To open the boundary update component of the software, select BAS from
the general toolbar and then select Open (Example 2.5.1).
84
Appendix F: BAS Procedures
Appendix F: BAS Procedures
Example 2.5.1: Opening the map
2.6 Customizing the Map View
If you determine that there is data being displayed that will not be helpful
to you as you make your boundary updates, such as tract or block
boundaries, you may hide the data. To make a type of data, or layer,
hidden from your view, select the Map Layers tool (Example 2.6.1) in the
main toolbar.
Example 2.6.1: Map Layers tool
For each layer that you do not wish to view, select it from the list and click
the Hide Layer button (Example 2.6.2). If multiple layers exist for a data
type (such as Census Block, Census Block 1), select each layer and click
the Hide Layer button. A data type is listed more than once if you have
received information for multiple counties.
Example 2.6.2: Hiding Layers Previously Viewable
This tool can also be used if a layer is hidden and you wish to view the
data. To show a layer that is currently hidden, select the layer and click
the Show Layer button (Example 2.6.3).
Appendix F: BAS Procedures
85
Appendix F: BAS Procedures
Example 2.6.3: Showing Layers Previously Hidden
2.7 Editing the Boundary Data in the MTPS
The MTPS allows you to make many types of boundary updates to the
map (e.g. add a new incorporation, add an addition or annexation, modify
an area landmark, etc.). The following subsections will describe the how
to use the software to make the changes to the map and the documentation
needed for each type of change.
2.7.1 Map Editing Toolboxes
There are four map editing toolboxes: the BAS toolbox, Line Editing
toolbox, Area Editing toolbox, and Point Editing toolbox. Table 2.7.1.1
describes the data that is able to be edited using the different toolboxes.
TOOLBOX
DATA EDITED
Boundaries of legally defined areas
BAS toolbox
•
American Indian areas
•
Counties
•
Minor Civil Divisions
• Incorporated Places
Features
Line Editing toolbox
•
Roads, 1 dimensional stream, railroad,
etc.
•
All feature updates should be made in the
LUCA module, unless they are coincident
with a boundary. Please review the CBT
for further information about feature
updates.
Boundaries of an Area Landmark
Area Editing toolbox
•
Point Editing toolbox
Airport, bodies of water, cemeteries, etc.
Point landmarks
•
Marina, dormitory, hospital, school, etc.
Table 2.7.1.1: Data Edited Using Each Toolbox
86
Appendix F: BAS Procedures
Appendix F: BAS Procedures
These toolboxes can be accessed by clicking on BAS on the main toolbar
at the top of the screen and then selecting the toolbox of interest (Example
2.7.1.1).
Example 3.8.1.1: Opening the BAS toolbox
NOTE: Some toolboxes can not be open at the same time, such as the
BAS toolbox and the Area Editing toolbox. If you receive a message that
a toolbox can not be opened due to another toolbox being open, please
close the conflicting toolbox and try again.
Appendix 1 contains tables showing the tools contained within each
toolbox and their functionality. Although these tables describe each of the
tools and how to use them, an in depth description on all of the necessary
steps to complete each type of change will be described in the following
sections. The Computer Based Trainings also offer visual demonstrations
of how to complete map updates.
2.7.2 Boundary Changes Using the BAS Toolbar
As stated in Table 2.7.1.1, changes to the boundaries of legal areas are
made through the BAS toolbox. An explanation of the tools in this
toolbox is given in Appendix 1 Table 2. Although the different kinds of
boundary changes require different types of documentation, the steps to
complete the map updates are similar. Section 2.7.2.1 will describe the
steps to completing a boundary change using the BAS toolbox, and
potentially the Line Editing toolbox. Section 2.7.2.2 will provide a series
of tables describing the required documentation for each of the types of
boundary changes.
NOTE: Although the software lists all of the change types for each entity
type (American Indian Reservation, Incorporated Place), only specific
types of changes will be processed for entity type. Please see Appendix 2
for a list of acceptable types of change by entity type.
The CBT provides visual demonstrations of how to perform boundary
updates. These demonstrations will be helpful in showing the different
tools and steps to complete a change on the map. Please ensure that you
have reviewed these demonstrations before completing boundary updates.
Appendix F: BAS Procedures
87
Appendix F: BAS Procedures
2.7.2.1 Creating Boundary Change Polygons
To create boundary change polygon, complete the following steps:
1) Select the level of geography that the change is being made to from the
Edit Layer dropdown menu on the BAS toolbox. This step only
applies to county or American Indian area participants. All other
participants will have the selection set for them.
2) Select the entity you wish to edit from the Target Area dropdown
menu on the BAS toolbox. This step only applies to county or
American Indian area participants. All other participants will have the
selection set for them.
3) Select the appropriate type of change from the Action dropdown menu
on the BAS toolbox 8. The available types of change are:
•
Addition or Annexation.
•
Boundary Correction (add).
•
Boundary Correction (remove).
•
Geographic Corridor.
•
Deletion or Deannexation.
•
Geographic Offset.
•
New Entity.
•
Other.
NOTE: Boundary Corrections are fixes to the representation of our
boundary that are not related to a new or unreported legal action. These
are what in a paper environment were referred to as drafting corrections.
4) Zoom to the area of change by using the Zoom In tool ( ) on the
General toolbox or the Zoom to Target Area tool ( ) on the BAS
toolbox.
5) Select the faces that make up the area of change. The Select by
Pointing tool ( ) and Select by Shape tool ( ) on the BAS toolbox
can both be used to identify an area of change. If a face is accidentally
selected, you may unselect the face by using the Select by Pointing
tool.
6) If you would like to select only a portion of a current face, you will
need to add a line to divide the face. Please refer to the Editing Linear
Features CBT for instruction on how to add a line to divide the face. If
the line is being added as a boundary and a feature does not exist there,
give the line a MTFCC of T1100. Type the word Boundary into the
fullname field. Once your added line has been saved, the MTPS will
88
Appendix F: BAS Procedures
Appendix F: BAS Procedures
split the face into two separate faces. You will then be able to select
the desired area.
7) Check to ensure that the correct faces were selected. Small faces may
occur in congested areas, so it is important that you use the Zoom In
tool to view an area in detail and check that you have selected all of the
area you intended.
8) Click the Save Edits tool (
) on the BAS toolbox.
2.7.2.2 Populating the BAS Entity Update Form
After the edit is saved, a popup box will appear requesting the attribute
information for the change. Boundary correction, either in or out, and
geographic offsets do not require any attribute information.
The following fields are present on the Update Form:
•
Authorization Type
o This field is requesting for the type of legal action that was
taken to change the boundary. A drop down menu is available
for the appropriate Authorization Type to be chosen.
•
Authorization Number
o This field is asking for the record number associated with the
legal action that changed the boundary.
•
Effective Date
o This field requests date in which the boundary change was in
effect. A calendar is available to choose the date.
•
MCD
o This field is asking information regarding the MCD the area
was in prior to the boundary update.
•
Type of Land Added
o This field has a drop down menu listing the appropriate types
for American Indian Area boundary updates.
The required information for each of the change types, excluding
boundary correction and geographic offset, is displayed by entity type in
the Tables 2.7.2.2.1 - 2.7.2.2.3. In the tables, Y means that the
information is required, N means that the field is uneditable, and A means
that the field editable but the information is not required.
Appendix F: BAS Procedures
89
Appendix F: BAS Procedures
ATTRIBUTE INFORMATION REQUIRED FOR ADDITIONS OR
ANNEXATIONS AND DELETIONS OR DEANNEXATIONS
Authorization
Type
Authorization
Number
Effective
Date
MCD
Type of
Land
Added
Y
Y
Y
N
Y
Y
Y
Y
N
Y
Counties
Y (except
GA*)
Y (except
GA*)
Y
N
N
Minor Civil
Divisions
(MCD)
Y
Y
Y
N
N
Incorporated
Places
Y (except
GA*)
Y (except
GA*)
Y
A**
N
American
Indian Areas
Tribal
Subdivisions
Table 2.5.2.2.1
* GA state law does not require entities to record an Authorization type or
number but it requires participant to submit the acreage of annexations.
The MTPS automatically calculates the acreage of the area and inputs it
into the form.
**The MCD field only needs to be entered when a change is made to an
incorporated place in a state that has MCDs. If such a change is made,
please enter the MCD that contained the area prior to the annexation.
ATTRIBUTE INFORMATION REQUIRED FOR GEOGRAPHIC CORRIDORS
American
Indian Areas
Minor Civil
Divisions
(MCD)
Incorporated
Places
Authorization
Type
Authorization
Number
Effective
Date
MCD
Type of
Land
Added
A
A
A
A
Y
A
A
A
A
N
A
A
A
A
N
Table 2.5.2.2.2
90
Appendix F: BAS Procedures
Appendix F: BAS Procedures
ATTRIBUTE INFORMATION REQUIRED FOR NEW ENTITY
Entity Name
Status
Effective Date
Tribal Subdivisions
Y
Y
Y
Incorporated Places
Y
N
Y
Table 2.5.2.2.3
The update will not be able to be finalized until each required field in
completed. If you do not have information, for a required field, place the
word Unknown in the field. The Census Bureau will review each record
with an Unknown to determine if the update can be integrated into
MAF/TIGER database. If an issue arises with such a record, the person
listed on the Participant Information form will be contacted.
2.7.2.3 Deleting a Change Polygon After It has been Finalized
If you determine that a change polygon was created in error, complete the
following steps to delete the change:
1) Select the Delete a Change ( ) tool from the BAS toolbox.
2) Select the change polygon that you wish to delete.
3) The software will ask you to verify that you wish to delete the change.
Answer yes.
2.7.3 Linear Feature Updates
Refer to the Editing Linear Features CBT for instruction on how to add a
feature. This instructional demonstration will provide information on the
steps to create a feature and the required information. The Help menu in
the MTPS also provides a list of classification codes that can be selected
when creating a line.
2.7.4 Area Landmark Updates
As stated in Table 2.7.1.1, changes to the boundaries of area landmarks are
made through the Area Editing toolbox. An explanation of the tools in
this toolbox is given in Appendix 1 Table 2. The following sections will
describe the types of changes that can be made to area landmarks, the
steps to complete those changes, and the required information that must
accompany the map update, if any.
2.7.4.1 Boundary Corrections to Area Landmarks
Since area landmarks and water features are not legal entities, the only
types of boundary change that can be done to an existing landmark are
boundary correction (add) and boundary correction (remove). To create
boundary correction change polygons complete the following steps:
Appendix F: BAS Procedures
91
Appendix F: BAS Procedures
1) Select the type of geography that the change is being made to from the
Edit Layer dropdown menu on the Area Editing toolbox. The choices
will be either “Area Landmark” or “River, Lake, or Ocean.”
2) Select the geography you wish to edit from the Target Area dropdown
menu on the Area Editing toolbox.
3) Select the type of change you want to make from the Action dropdown
menu on the Area Editing toolbox. The available types of change that
relate to adjusting a boundary are:
•
Boundary Correction (add).
•
Boundary Correction (remove).
4) Zoom to the area in which the change is located by using the Zoom In
tool ( ) on the General toolbox or the Zoom to Target Area tool
( ) on the Area Editing toolbox.
5) Select the faces that make up the area of change. The Select by
Pointing tool ( ) and the Select by Shape tool ( ) on the Area
Editing toolbox can both be used to identify an area of change. If a
face is accidentally selected you may unselect the face by using the
Select by Pointing tool.
a) If you would like to select only a portion of a current face, you will
need to add a line to divide the face. Please refer to the Editing
Linear Features CBT for instruction on how to add a line to divide
the face. If the line is being added as a boundary and a feature
does not exist there, give the line a MTFCC of T1100. Type the
word Boundary into the fullname field. Once your added line has
been saved, the MTPS will split the face into two separate faces.
You will then be able to select the desired area.
6) Check to ensure that the correct faces were selected. Small faces may
occur in congested areas, so it is important that you use the Zoom In
tool to view an area in detail and check that you have selected all of the
area you intended.
7) Click the Save Edits tool (
) on the Area Editing toolbox.
Boundary corrections do not require any additional information to be
completed. This means that a popup box, such as the ones that appeared
when an annexation was made to a legal boundary, will not appear when
the Save Edits tool is used to complete the change.
2.7.4.2 New Landmark
New area landmarks and water features can be added to the map using the
Area Editing toolbox. To create a new area landmark or water feature,
complete the following steps:
1) Select the type of geography that the change is being made to from the
Edit Layer dropdown menu on the Area Editing toolbox. The choices
will be either “Area Landmark” or “River, Lake, or Ocean.”
92
Appendix F: BAS Procedures
Appendix F: BAS Procedures
2) Select New Landmark from the Action dropdown menu on the Area
Editing toolbox.
3) Zoom to the area in which the new landmark is located by using the
Zoom In tool ( ) on the General toolbox.
4) Select the faces that make up the new landmark. The Select by
Pointing tool ( ) and the Select by Shape tool ( ) on the Area
Editing toolbox can both be used to identify an area of change. If a
face is accidentally selected, you may unselect the face by using the
Select by Pointing tool.
a) If you would like to select only a portion of a current face, you will
need to add a line to divide the face. Please refer to the Editing
Linear Features CBT for instruction on how to add a line to divide
the face. If the line is being added as a boundary and a feature
does not exist there, give the line a MTFCC of T1100. Type the
word Boundary into the fullname field. Once your added line has
been saved, the MTPS will split the face into two separate faces.
You will then be able to select the desired area.
5) Check to ensure that the correct faces were selected. Small faces may
occur in congested areas, so it is important that you zoom in close to
the area and check that you have selected all of the area you intended.
6) Click the Save Edits tool ( ) on the Area Editing toolbox.
7) A window will appear asking for the name of the geography. Type the
name into the box and select OK.
2.7.4.3 Deletion or Deannexation
Area landmarks and water features can be removed from the map if they
no longer exist or if they are erroneous. To remove an area landmark or
water feature, complete the following steps:
1) Select the type of geography that the change is being made to from the
Edit Layer dropdown menu on the Area Editing toolbox. The choices
will be either “Area Landmark” or “River, Lake, or Ocean.”
2) Select the geography you wish to delete from the Target Area
dropdown menu on the Area Editing toolbox.
3) Select Deletion or Deannexation from the Action dropdown menu on
the Area Editing toolbox.
4) Click the Save Edits tool (
) on the Area Editing toolbox.
The deletion of an area landmark or water feature does not require any
additional information to be completed. This means that a popup box will
not appear when the Save Edits tool is used to complete the change.
2.7.4.4 Change Name
The names of area landmarks and water features can be updated if the
name has changed or if the name appears incorrectly on the map. To
change the name of an area landmark or water feature, complete the
following steps:
Appendix F: BAS Procedures
93
Appendix F: BAS Procedures
1) Select the type of geography that the change is being made to from the
Edit Layer dropdown menu on the Area Editing toolbox. The choices
will be either “Area Landmark” or “River, Lake, or Ocean.”
2) Select the geography whose name has changed from the Target Area
dropdown menu on the Area Editing toolbox.
3) Select Change Name from the Action dropdown menu on the Area
Editing toolbox.
4) Click the Save Edits tool ( ) on the Area Editing toolbox.
5) A window will appear asking for the new name of the geography.
Type the name into the box and select OK.
2.7.5 Point Landmark Updates
As stated in Table 2.7.1.1, changes to point landmarks are made through
the Point Editing toolbox. An explanation of the tools in this toolbox is
given in Appendix 1 Table 4. The following sections will describe the
types of changes that can be made to point landmarks, the steps to
complete those changes, and the required information that must
accompany the map update, if any.
2.7.5.1 Adding a Point Landmark
New point landmarks can be added to the map using the Point Editing
toolbox. To create a new point landmark, complete the following steps:
1) Select the Add Point tool ( ).
2) Click in the location where the point landmark is located.
3) A window will appear with fields where the attribute information for
the landmark can be filled (Example 2.5.4.1.1). Click in the white area
next to MTFCC. A list of point landmark types will appear. Select the
appropriate type. Type the name of the point landmark in the white
area next to fullname. If the point landmark does not have a name,
click the plus sign next to fullname.
4) Select the Save Edits tool (
) to finalize the change.
Example 2.5.4.1.1: Attribute window for Point Landmarks
94
Appendix F: BAS Procedures
Appendix F: BAS Procedures
2.7.5.2 Deleting a Point Landmark
Point landmarks that exist on the map can also be deleted using the Point
Editing toolbox. To delete a point landmark, complete the following
steps:
1) Select the Delete Point tool (
).
2) Click on the existing point landmark.
3) Select the Save Edits tool (
) to finalize the change.
If a point landmark is erroneously deleted, select the undo button at the top
of the MTPS screen.
2.7.5.3 Renaming or Recoding a Point Landmark
Point landmarks that exist on the map can also be renamed or recoded
using the Point Editing toolbox. To rename or recode a point landmark,
complete the following steps:
1) Select the Edit Point Attributes tool ( ).
2) Click on the existing point landmark.
3) Change the name and/or code of the landmark.
4) Select the Save Edits tool (
) to finalize the change.
Appendix F: BAS Procedures
95
Appendix F: BAS Procedures
BAS PROCEDURES
3.0 Reviewing Updates
3.0 Reviewing Updates
It is very important that you review each boundary update you made to a
legal entity before submitting your changes to the Census Bureau. The
changes that you make using the MTPS will be processed for inclusion in
to the MAF/TIGER database and will move the legal boundaries of the
entities you specified. A very helpful tool to use for the review of
boundary changes to legal boundaries is the List Changes tool. This tool
can be accessed by selecting BAS from the MTPS toolbar and then select
List Changes (Example 3.1)
Example 3.1: Opening the List Changes Tool
Use this review tool to complete the following steps for the review of your
changes:
1) Select the level of geography you would like to review from the
dropdown.
2) Select the change you would like to review from the list.
3) Select the Zoom to Changes tool ( ) located at the top of the
window.
4) Zoom into the area of change and make sure all of the appropriate
faces have been selected.
a) If faces are missing or incorrect faces have been added, delete the
change polygon using the Delete a Change tool ( ) on the BAS
toolbox and recreate the change polygon.
5) While zoomed into an area of change, ensure that any needed
geographic offsets and corridors have been created. If they have not
been created, use your BAS toolbox to do so.
6) Review the attribute information by selecting the Information tool
( ) and clicking on the change polygon. The popup window will
appear and the attribute data can be corrected, if necessary.
7) Ensure that boundary corrections do not dissolve relationships between
features and the boundary.
96
Appendix F: BAS Procedures
Appendix F: BAS Procedures
BAS PROCEDURES
4.0 Printing Maps of Your Boundary Changes
4.0 Printing Maps of your Boundary Changes
If you would like to retain a printed copy of the changes you made while
using the MTPS, please review the Printing a Map section of the Help
menu.
Appendix F: BAS Procedures
97
Appendix F: BAS Procedures
BAS PROCEDURES
Appendix 1: Tool Explanation by Toolbox
Appendix 1: Tool Explanations by Toolbox
This appendix will describe each tool that is important to a BAS
submission. The description of the tools will be organized by toolbox to
ensure that you are able to locate them when necessary. Please refer back
to the main portion of the User’s Guide for the explanation of how use
these tools together to complete different types of changes.
Table 1: General Toolbox
TOOL
EXAMPLE SITUATION
You wish to zoom into a
specific area.
You would like to see a
larger area than is currently
in view.
You would like to view a
different portion of the map
while keeping it the same
scale.
While navigating the map
you may accidentally change
the scale.
After working in the MTPS
you may be interested in
seeing the extent of the map
which was visible when you
first opened it that day.
You are interested in learning
about the attribute
information of different
features or geographies.
You are adding an
annexation or addition and
you know that it begins a
certain distance down a road
from an intersection.
98
INSTRUCTIONS
•
Select the Zoom In tool from the toolbox.
•
Click in the area map you would like to
see larger.
•
Select the Zoom Out tool.
•
Click on the map.
•
Select the Pan tool.
•
Click on the map.
•
While holding the mouse button down,
drag your cursor to move the map.
•
Select the Previous Scale tool.
•
Click on the map.
•
Select the Initial Scale tool.
•
Click on the map.
•
The tool will display the map as it did
when your current session began. This
tool does not have the ability to show the
map that was initially displayed when you
installed the program.
•
Select the Info tool.
•
Click on the item in the map window.
•
A popup box will provide attribute
information.
•
Select the Measure Distance tool.
•
Click along the feature you would like to
measure.
•
A popup box will appear stating the
distance in miles.
Appendix F: BAS Procedures
Appendix F: BAS Procedures
You know the area of the
annexation, as well as the
distance that the annexation
spans along the road but you
do not know how far the
annexation goes into a field.
•
Select the Measure Area tool.
•
Click multiple locations to create a
polygon.
•
Double click to complete the polygon.
•
A popup box will appear stating the area,
in square miles and acres, and the
perimeter, in miles.
Table 2: BAS and Area Editing Toolboxes: Tools to Identify Entity and
Type of Change
TOOL
FUNCTION
INSTRUCTION
To specify the
level of
geography that
you wish to
edit.
To specify the
entity you wish
to edit.
To specify the
type of change
you would like
to make to an
entity.
To change the target area in
the toolbox by clicking on an
entity, after selecting the
appropriate Edit Layer.
•
Choose the level of
geography that you wish to
edit from the dropdown
menu.
•
Note: If you are a county or
American Indian area
participant you will be able to
select multiple levels of
geography. The edit layer
will default to your entity’s
level of geography, if you are
a place or MCD participant.
•
Choose the entity you wish to
edit from the dropdown
menu.
•
Note: If you are a county or
American Indian area
participant you may be able
to select multiple target
areas. The target area will
default to your entity, if you
are a place or MCD
participant.
•
Choose the Action from the
dropdown menu.
•
Select the level of geography you are
interested in from the Edit Layer
dropdown.
•
Click on tool.
•
Click on an area of interest.
•
The program will change the target area
to the entity which you clicked on.
Appendix F: BAS Procedures
99
Appendix F: BAS Procedures
To zoom to the area that you
have specified in the Target
Area.
To identify the attributes of a
face.
To delete a change after it
has been saved.
To select a face as part, or
all, of an area of change.
To select an area of faces as
an area of change.
•
Choose the level of geography you are
interested in from the Edit Layer
dropdown.
•
Choose the entity you are interested in
from the Target Area dropdown.
•
Click the Zoom to Target Area tool.
•
The program will zoom to the entity you
have specified in the Target Area.
•
Click on the Identify tool.
•
Select the face you are interested in.
•
The attributes of that face for the Edit
Layer selected will be shown.
•
Click on the Delete a Change tool.
•
Select the change you would like to
delete.
•
Verify that you would like to delete the
change.
•
Click on the Select by Pointing tool.
•
Select each face that is part of the change
area.
•
Click on the Select by Shape tool.
•
Draw a polygon around the area that has
changed. Double click to close the
polygon.
•
Click on the Save Edits tool.
To complete a change and
save it.
•
An update form will appear asking for the
information required for the type of
change that is being made.
To cancel a change before it
is saved.
•
Click on the Cancel Edits tool.
Table 3: Line Editing Toolbox
TOOLS
FUNCTION
INSTRUCTIONS
To add a feature.
100
•
Click the Add Line tool.
•
Draw the feature on the map with your mouse.
•
Double click to end drawing.
•
A popup box will appear listing the possible
attributes that can be edited.
•
The minimum attribute requirement for all added
features is a MTFCC and a name.
•
Double click in the area beside MTFCC to display a
list of possible MTFCCs.
•
If the feature is unnamed, click on the plus sign
beside fullname. If the feature is named, type the
name is the space.
Appendix F: BAS Procedures
Appendix F: BAS Procedures
To delete a
feature.
To split a feature.
To delete a
feature but save
the attributes.
•
Click the Delete Line tool.
•
Select the feature you would like to have deleted.
•
Click the Split Line tool.
•
Click on the line at the spot where you would like the
line to be split.
•
Click on the Copy and Delete Line tool.
•
Click on the line that you would like deleted. The
tool will save the attributes so that you can use the
Replace Copied Line tool.
•
Click on the Replace Copied Line tool.
To add a feature
and add the saved
attributes.
•
Draw the feature on the map with your mouse. The
attributes from the feature that you deleted using the
Copy and Delete Line tool will be added to the line
that was just created.
•
Click on the Edit Line Attribute tool.
To edit a feature’s
attributes.
•
Select the line of interest.
•
A window will popup displaying the attributes. Use
this window to edit.
To display a
feature’s
alternative names.
•
Click on the Display Alternative Names tool.
•
Click on the line that you are interested in.
•
A window will popup that will display the primary and
secondary names, if they exist for the feature.
To display the
direction of the
line.
•
Click the Show Right/Left Direction Arrows tool.
The direction of all features will appear.
•
Click on the Save Edits tool.
To save an edit.
•
The software will not allow you to save an added
feature without updating the attribute information.
•
To cancel an edit before saving, click the Cancel
Edit tool.
•
All edits made since the last save will be deleted.
To cancel an edit.
Table 4: Point Editing Toolbox
TOOL
FUNCTION
INSTRUCTIONS
To add a point
landmark.
To delete a point
landmark.
•
Click on the Add Point tool.
•
Click at the location with the point landmark should
be placed.
•
A window will popup where the name and the type of
the point landmark must be entered.
•
Click on the Delete Point tool.
•
Select a point landmark that is present on the map.
Appendix F: BAS Procedures
101
Appendix F: BAS Procedures
To edit the
attributes a point
landmark.
•
Click on the Edit Point Attributes tool.
•
Select the point landmark that you wish to edit.
•
Type the correct information into the attribute
window.
•
To cancel an edit before saving, click the Cancel
Edit tool.
•
All edits made since the last save will be deleted.
•
Click on the Save Edits tool.
•
The software will not allow you to save an added
point landmark without adding attribute information.
To cancel an edit.
To save an edit.
102
Appendix F: BAS Procedures
Appendix F: BAS Procedures
BAS PROCEDURES
Appendix 2: Acceptable Changes by Entity Type
Appendix 2: Acceptable Changes by Entity Type
GEOGRAPHY
Place
County Subdivision
County
Tribal Subdivision
American Indian
Areas
AVAILABLE CHANGE TYPES
•
Addition or Annexation
•
Boundary Correction (in)
•
Boundary Correction (out)
•
Deletion or Deannexation
•
Geographic Corridor
•
Geographic Offset
•
New Entity
•
Other
•
Addition or Annexation
•
Boundary Correction (in)
•
Boundary Correction (out)
•
Deletion or Deannexation
•
Geographic Offset
•
New Entity
•
Addition or Annexation
•
Boundary Correction (in)
•
Boundary Correction (out)
•
Deletion or Deannexation
•
Addition or Annexation
•
Boundary Correction (in)
•
Boundary Correction (out)
•
Deletion or Deannexation
•
Geographic Offset
•
New Entity
•
Other
•
Addition or Annexation
•
Boundary Correction (in)
•
Boundary Correction (out)
•
Deletion or Deannexation
•
Geographic Corridor
•
Geographic Offset
•
New Entity
•
Other
Appendix F: BAS Procedures
103
APPENDIX G
U.S. CENSUS BUREAU REGIONAL OFFICES
104
U.S. CENSUS BUREAU REGIONAL OFFICES
TOLL FREE 1-866-511-LUCA (5822)
105
Atlanta Regional Office
Detroit Regional Office
ATTN: Geography
ATTN: Geography
101 Marietta Street, N W, Ste. 3200
1395 Brewery Park Blvd, Ste. 100
Atlanta, GA 30303-2700
Detroit, MI 48207
Boston Regional Office
Kansas City Regional Office
ATTN: Geography
ATTN: Geography
4 Copley Place, Ste. 301
1211 North 8th Street
Boston, MA 02116
Kansas City, KS 66101-2129
Charlotte Regional Office
Los Angeles Regional Office
ATTN: Geography
ATTN: Geography
901 Center Park Drive, Ste. 106
15350 Sherman Way, Ste. 400
Charlotte, NC 28217-2935
Van Nuys, CA 91406
Chicago Regional Office
New York Regional Office
ATTN: Geography
ATTN: Geography
1111 W 22nd Street, Ste. 400
395 Hudson Street, Ste. 800
Oak Brook, IL 60523-1918
New York, NY 10014
Dallas Regional Office
Philadelphia Regional Office
ATTN: Geography
ATTN: Geography
8585 N Stemmons Freeway, Ste. 800 S
833 Chestnut Street, Ste. 504
Dallas, TX 75247
Philadelphia, PA 19107-4405
Denver Regional Office
Seattle Regional Office
ATTN: Geography
ATTN: Geography
6900 W Jefferson Avenue, Ste. 100
601 Union Street, Ste. 3800
Denver, CO 80235
Seattle, WA 98101-1074
Appendix G: U.S. Census Bureau Regional Offices
GLOSSARY
Address breaks - Address breaks are the city-style addresses on each side of
a boundary or at an intersection of a street with another street or another
feature.
Address count list - Identifies the number of housing unit addresses and
group quarters addresses on the Census Bureau’s address list for each census
block within a jurisdiction.
Address range - The lowest and highest address numbers used to identify
structures along each side of a street segment that has city-style addresses.
Usually one side of the street has even address numbers and the other side has
odd address numbers.
Block number - A 4-digit number, plus 1 alpha character block suffix, if
applicable, used by the Census Bureau to identify each census block. Census
blocks are numbered uniquely within each census tract.
Boundary - A line, either invisible or coincident with a visible feature that
identifies the extent of a geographic entity, such as a census tract, city, county,
or state.
Boundary and Annexation Survey - An annual survey to collect information
about selected legally defined geographic areas. The BAS is used to update
information about the legal boundaries and names of all governmental units in
the United States.
Census Bureau Address List - A nationwide list of all housing unit and
group quarters addresses known to the Census Bureau. In addition to the
mailing address and ZIP Code, the Address List may identify the location of
each housing unit and group quarters.
Census block - A geographic area bounded by visible features, such as
streets, roads, streams, and railroad tracks, and invisible features, such as the
boundaries of governmental units and other legal entities. A census block is
the smallest area for which the Census Bureau collects and tabulates statistical
information. Census blocks are numbered within census tracts and are unique
to the census tract to which they belong.
Census block number -Census block numbers contain a 4-digit number plus
a 1-digit alpha character, if applicable, e.g. 3001A. Suffixes, such as 2011A
and 2011B, reflect boundary changes as well as added features.
Census Bureau - An agency within the U.S. Department of Commerce. The
U.S. Census Bureau is the country's preeminent statistical collection and
dissemination agency. It publishes a wide variety of statistical data about
people and the economy of the nation. The Census Bureau conducts
approximately 200 annual surveys and conducts the decennial census of the
United States population.
Glossary
106
Census Bureau map - Any map produced by the Census Bureau. A Census
Bureau map displays geographic entities used in a Census Bureau sponsored
census or survey for which the Census Bureau tabulates data.
Census tract - A small, relatively permanent statistical division of a county or
statistically equivalent entity, delineated for the purpose of presenting Census
Bureau statistical data. Census tracts never cross the boundary of a county or
statistically equivalent entity, but may split other geographic entities; e.g.,
minor civil divisions and places.
Census tract number - Unique numbers to identify census tracts within a
county or statistically equivalent entity. Census tract numbers contain up to a
4-digit number followed by a decimal point and a 2-digit number for suffixed
tracts, e.g., 1234.01. For census tracts without a suffix, the number will
contain a period with zero fill, e.g., 4567.00. Leading zeros are not shown on
Census Bureau maps.
Chief executive/highest elected official - The person most responsible for the
governmental activities of a local government. This person receives the
LUCA program invitation letter, and must designate a LUCA liaison, if
desired.
City-Style address - An address that consists of a house number and street
name; for example, 201 Main Street. The address may or may not be used for
the delivery of mail and may include apartment numbers/designations or
similar identifiers.
Confidentiality - The guarantee made by law (Title 13, United States Code)
to individuals who provide information about themselves or their business to
the Census Bureau. This item refers to the Census Bureau’s promise of
nondisclosure of that information to others.
County - The primary legal division of most states. Most are governmental
units with powers defined by state law.
Delivery Sequence File (DSF) - A computerized file containing all delivery
point addresses serviced by the U.S. Postal Service (USPS). The USPS
updates the DSF continuously as its letter carriers identify addresses for new
delivery points or changes in the status of existing addresses.
Enumeration - The process of interviewing people and recording the
information on census forms.
Feature - Any part of the landscape, whether natural (such as a stream or
ridge) or artificial (such as a road or power line). In a geographic context,
features are any part of the landscape portrayed on a map, including
nonvisible boundaries of legal entities, such as city limits or county lines.
Federal Information Processing Standards codes (FIPS codes) - a
standardized set of numeric or alphabetic codes issued by the National
Institute of Standards and Technology (NIST) to ensure uniform identification
of geographic entities through all federal government agencies. The entities
107
Glossary
covered include: states and statistically equivalent entities, counties and
statistically equivalent entities, named populated and related location entities
(such as places and county subdivisions), and American Indian and Alaska
Native areas.
Geocodes - Codes that place an individual address in its correct geographic
location, which includes the correct state, county, census tract, and census
block codes.
Geographic Information System (GIS) - A computer system for the storage,
retrieval, and maintenance of information about the points, lines, and areas
that represent the streets and roads, rivers, railroads, geographic entities, and
other features on the surface of the Earth-information that previously was
available only on paper maps.
Governmental unit - A geographic entity established by legal action for the
purpose of implementing specified governmental functions. Most
governmental units provide a number of general government services and
raise revenues (usually through taxing authority).
Group quarters - A place where people live or stay, in a group living
arrangement, that is owned or managed by an entity or organization providing
housing and/or services for the residents. This is not a typical household-type
living arrangement. These services may include custodial or medical care as
well as other types of assistance, and residency is commonly restricted to
those receiving these services. People living in group quarters are usually not
related to each other.
Group quarters include such places as correctional facilities, juvenile
facilities, nursing homes, hospitals with long-term care facilities, college or
university dormitories, fraternities, sororities, dormitories for workers,
religious group quarters, shelters, group homes.
Housing unit (HU) - A single-family house, townhouse, mobile home, trailer,
apartment, group of rooms, or a single room occupied as a separate living
quarters or, if vacant, intended for occupancy as a separate living quarters. A
separate living quarters is one in which one or more occupants (or intended
occupants, if vacant) live separate from any other individual(s) in the building
and have direct access to the living quarters without going through another
living quarters, such as from outside the building or through a common hall.
Legal boundary - The legally defined boundary of a governmental unit,
usually referring to a county, minor civil division, or incorporated place. The
legal boundary identifies the area within a local government's jurisdiction, and
thus bounds the area of LUCA responsibility.
LUCA liaison - Also known as the program primary liaison or designated
liaison. A person voluntarily appointed by the chief executive/highest elected
official of each jurisdiction to review the Census Bureau’s address list and
maps against local records to identify differences.
Glossary
108
MAF/TIGER Database - The Census Bureau’s new nationwide geographic
database, which integrates the MAF (Master Address File) and TIGER
(Topologically Integrated Geographic Encoding and Referencing) files.
MAF/TIGER Partnership Software (MTPS) - A GIS application provided
by the Census Bureau that has customized functionality required by Census
Bureau geographic partnership programs.
Master Address File (MAF) - A nationwide database of all addresses to
support many of the Census Bureau’s operations. Besides containing mailing
addresses and ZIP Codes, a MAF record also contains geographic information
about the location of addresses. Now part of the MAF/TIGER Database.
Metadata - describes the data content, coordinate system/projection, author,
source, and other characteristics of GIS files.
Minor civil division (MCD) - A type of governmental unit that is the primary
governmental or administrative subdivision of a county. MCDs are identified
by a variety of terms, such as town (in 8 states), township, and/or district, and
include both functioning and nonfunctioning governmental entities.
Noncity-Style address - An address that does not have a house number and/or
street name or may not include a complete house number and street name
address. This includes rural route and box number address and highway
contract route addresses, etc., which may include a box number, post office
boxes and drawers, and general delivery.
Occupied housing unit - A housing unit is classified as occupied if it is the
usual place of residence of the individual or group of persons living in it at the
time of enumeration or if the occupants are only temporarily absent; for
example, away on vacation. Occupied rooms or suites of rooms in hotels,
motels, and similar places are classified as housing units only when occupied
by permanent residents, that is, individuals for whom the facility is their usual
place of residence.
Place - A concentration of population either legally bound as an incorporated
place or identified by the Census Bureau as a census designated place.
Regional Office - One of 12 permanent Census Bureau offices responsible for
the Census Bureau’s office and field operations within its region.
Shapefile - Data set used to represent geographic features such as streets and
boundaries. Shapefiles can represent point, line, or area features and require
GIS or mapping software.
Street segment - The portion of a street or road between two features that
intersect that street or road, such as other streets or roads, railroad tracks,
streams, and governmental unit boundaries. The Census Bureau records the
known address ranges for every street segment with city-style addresses.
Structure Point - A dot on a Census Bureau map, used to show the location
of one or more living quarters. A 4-digit number plus 1-digit alpha character
109
Glossary
assigned within a census block to each structure point. Structure points are
stored in the TIGER® database.
Topologically Integrated Geographic Encoding and Referencing
(TIGER®) - A computer database that contains a digital representation of all
map features (streets, roads, rivers, railroads, lakes, and so forth) required to
support Census Bureau operations, the related attributes for each, and the
geographic identification codes for all entities used by the Census Bureau to
tabulate data for the United States, Puerto Rico, and Island Areas. Now part
of the MAF/TIGER Database.
Vacant housing unit - A habitable structure containing living quarters that is
not occupied. New housing units not yet occupied are classified as vacant
housing units if construction has reached a point where exterior windows and
doors are installed and final usable floors and a roof are in place. Vacant units
are excluded if open to the elements, or if there is positive evidence, such as a
sign on the house, that the housing unit is to be demolished or has been
condemned.
Glossary
110
INDEX
defined, 107
A
F
Address control file 1990, 2
defined, 2
Address Count List
defined, 13
Address Formats, 8
entity ID codes, 52, 54
Address range
in TIGER, 3
Address types
nonresidential, 8
residential, 8
Feature
defined, 107
Federal Information Processing Standards codes (FIPS
codes)
defined, 107
File
creating the changes file, 52, 54
G
Geocode
defined, 108
Geographic Information System (GIS)
defined, 108
Governmental unit
defined, 108
Group Quarter
defined, 108
Group quarters
acceptable types, 7
defined, 7
B
Boundary
defined, 106
Boundary and Annexation Survey (BAS), 18, 19, 68
defined, 106
Effective date of change, 73
update contact information, 71
C
Census address list improvement act of 1994, 2
Census block, 33
defined, 9, 106
number, 106
Census Bureau
contact, 69
Legal Office contact, 68
Census tract, 9, 33
defined, 9, 107
number, 107
Census tract number. See also census tract
defined, 9
Chief executive/highest elected official
defined, 107
invitation, 1
City-style address
defined, 1
City-Style address
defined, 107
Computer Based Training (CBT)
defined, 13
Confidentiality
defined, 107
H
Housing unit
defined, 6
Housing Unit
defined, 108
L
Legal boundary
defined, 108
Liaison
defined, 108, 109
LUCA program
explained, 1
schedule, 4
M
MAF/TIGER Partnership Software Computer Based
Training, 18
Map
adding a new street, 34
deleting a street, 51
reading, 33
Master address file (MAF), 13, 14, 17
creation, 2
defined, 109
Metadata
defined, 109
Minor civil division (MCD), 68
defined, 109
MTFCC, 48
D
Delivery sequence file (DSF), 2
Delivery Sequence File (DSF)
defined, 107
E
Enumeration
111
Index
MTPS
defined, 13
Help menu, 26
start, 18
toolbars, 21
Shapefile, 12, 13
defined, 13, 109
Shipping, 32, 52, 54
Street segment
defined, 109
structure points
defined, 110
N
defined, 109
Nonresidential addresses, 8
T
Technical Help Desk, 28
Topologically Integrated Geographic Encoding and
Referencing System (TIGER®), 13
defined, 110
O
Occupied housing unit
defined, 109
V
P
Vacant housing unit
defined, 110
Voting District/Block Boundary Suggestion Program,
18, 19
Participant responsibilities, 3
Participant Statistical Area Program, 18, 19
R
W
S
Website, 28
School District Review Program, 18, 19
Selection Set
creating, 59
defined, 59
deleting, 61
saving, 61
Z
ZIP
Software, 12
Index
112
| File Type | application/pdf |
| File Title | 2010 Decennial Census |
| Author | Bureau Of The Census |
| File Modified | 2007-10-15 |
| File Created | 2007-10-15 |