Form HUD-92005 Description of Materials

Description of Materials

U.S. Department of Housing
and Urban Development
Department of Veterans Affairs
Farmers Home Administrtation

HUD's OMB Approval No. 2502-0313 (exp. xx/xx/xxxx)

Public reporting burden for this collection of information is estimated to average 30 minutes per response, including the time for reviewing instructions, searching
existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. This agency may not collect
this information, and you are not required to complete this form, unless it displays a currently valid OMB control number.
The National Housing Act (12 USC 1703) authorizes insuring financial institutions against default losses on single family mortgages. HUD must evaluate the
acceptability and value of properties to be insured. The information collected here will be used to determine if proposed construction meets regulatory
requirements and if the property is suitable for mortgage insurance. Response to this information collection is mandatory. No assurance of confidentiality
is provided.

Proposed Construction

Under Construction

No.

(To be inserted by HUD, VA or FmHA)

Property address (Include City and State)

Name and address of Mortgagor or Sponsor

Name and address of Contractor or Builder

Instructions
1. For additional information on how this form is to be submitted, number of
copies, etc., see the instructions applicable to the HUD Application for
Mortgage Insurance, VA Request for Determination of Reasonable Value,
or FmHA Property Information and Appraisal Report, as the case may be.
2. Describe all materials and equipment to be used, whether or not shown on
the drawings, by marking an X in each appropriate check-box and entering
the information called for each space. If space is inadequate, enter “See
misc.” and describe under item 27 or on an attached sheet. The use of
paint containing more than the percentage of lead by weight
permitted by law is prohibiited.

3. Work not specifically described or shown will not be considered unless
required, then the minimum acceptable will be assumed. Work exceeding
minimum requirements cannot be considered unless specifically described.
4. Include no alternates, “or equal” phrases, or contradictory items. (Consideration of a request for acceptance of substitute materials or equipment is
not thereby precluded.)
5. Include signatures required at the end of this form.
6. The construction shall be completed in compliance with the related drawings
and specifications, as amended during processing. The specifications include
this Description of Materials and the applicable Minimum Property Standards.

1.

Excavation
Bearing soil, type _________________________________________________________________________________________________________

2.

Foundations
Footings concrete mix _____________________________

strength psi _______________ Reinforcing ________________________________

Foundation wall material ______________________________________

Reinforcing ________________________________

Interior foundation wall material ________________________________

Party foundation wall ___________________________________________

Columns material and sizes ___________________________________ Piers material and reinforcing ____________________________________
Girders material and sizes ____________________________________

Sills material __________________________________________________

Basement entrance areaway ___________________________________ Window areaways _____________________________________________
Waterproofing ____________________________________________

Footing drains ________________________________________________

Termite protection _________________________________________________________________________________________________________
Basementless space ground cover _________________________ insulation ______________________ foundation vents ____________________
Special foundations ________________________________________________________________________________________________________
Additional information
3.

Chimneys
Material _____________________________________ Prefabricated (make and size) __________________________________________________
Flue lining material ____________________________ Heater flue size ________________________ Fireplace flue size _____________________
Vents (material and size) gas or oil heater _____________________________________ water heater _____________________________________
Additional information

4.

Fireplaces
Type

solid fuel

gas-burning

Fireplace facing ____________________

circulator (make and size) ______________________________ Ash dump and clean-out_______
lining _______________________ hearth ___________________

mantel _____________________

Additional information

Retain this record for three years

Page 1 of 6

ref. HUD Handbook 4145.1 & 4950.1 form HUD-92005 (10/84)
VA Form 26-1852 and form FmHA 424-2

5.

Exterior Walls
Wood frame wood grade, and species ________________________________

Corner bracing Building paper or felt __________________

Sheathing ___________________ thickness _________ width ________

solid

spaced _________ o.c.

diagonal_______

Siding ______________________ grade ____________ type _________ size _________

exposure _________ fastening _____________

Shingles ____________________ grade ____________ type _________ size _________

exposure _________ fastening _____________

Stucco _____________________

thickness __________ Lath _______________________________________ weight _______________ lb.

Masonry veneer _______________________ Sills ___________________ Lintels ___________________ Base flashing ___________________
Masonry

solid

faced

stuccoed total wall thickness ____________

Backup material ______________ thickness ___________
Door sills _______________________

facing thickness ___________

facing material ________

bonding _______________________

Window sills ______________________ Lintels ________________ Base flashing _________________

Interior surfaces dampproofing, _______ coats of _________________________________

furring ___________________________________

Additional information
Exterior painting material ___________________________________________________________________________ number of coats ______
Gable wall construction
6.

same as main walls

other construction____________________________________________________________

Floor Framing
Joists wood, grade, and species ___________________ other ___________________ bridging ___________________
Concrete slab

basement floor

first floor

ground supported

anchors ______________

self-supporting mix ___________________ thickness __________

reinforcing ________________________________ insulation _____________________________ membrane ___________________________
Fill under slab material _____________________________ thickness ______
Additional information
7.

Subflooring (Describe underflooring for special floors under item 21)
Material grade and species ____________________________________________________________ size _________
Laid

first floor

second floor

attic ____________ sq. ft.

diagonal

type __________________

right angles

Additional information
8.

Finish Flooring (Wood only. Describe other finish flooring under item 21)
Location

Rooms

First floor
Second floor
Attic floor

Grade

Species

Thickness

Width

Bldg. Paper

Finish

sq. ft.

Additional information
9.

Partition Framing
Studs wood, grade, and species __________________________

size and spacing _________________________ Other _____________________

Additional information
10. Ceiling Framing
Joists wood, grade, and species ____________________________ Other _________________________ Bridging _________________________
Additional information
11. Roof Framing
Rafters wood, grade, and species ______________________________

Roof trusses (see detail) grade and species ________________________

Additional information
12. Roofing
Sheathing wood, grade, and species __________________________________________________________
Roofing _______________________________

grade ______________

size _________

solid

spaced ______ o.c.

type ________________________________________

Underlay ___________________________________________________

weight or thickness ______

size _________

Built-up roofing ______________________________________________

number of plies _________

surfacing material ____________________

Flashing material _____________________________________________ gage or weight ______________

fastening _____________

gravel stops

snow guards

Additional information

Retain this record for three years

Page 2 of 6

ref. HUD Handbook 4145.1 & 4950.1 form HUD-92005 (10/84)
VA Form 26-1852 and form FmHA 424-2

13. Gutters and Downspouts
Gutters material ___________________________

gage or weight ___________

size _________

shape ________________________________

Downspouts material _______________________

gage or weight ___________

size _________

shape _______________

Downspouts connected to

Storm sewer

sanitary sewer

dry-well

number ________

Splash blocks material and size ______________________

Additional information
14. Lath and Plaster
Lath

walls

Dry-wall

ceilings material _______________ weight or thickness __________

walls

ceilings material _______________________

Plaster coats _____finish ______________________
thickness _______

finish ______________________

Joint treatment
15. Decorating (Paint, wallpaper, etc.)
Rooms

Wall Finish Material and Application

Ceiling Finish Material and Application

Kitchen
Bath
Other

Additional information
16. Interior Doors and Trim
Doors type ________________________________________________ material _______________________________ thickness _______________
Door trim type ___________________

material _________________ Base type ________________

material _______________

size ________

Finish doors _________________________________________________ trim ________________________________________________________
Other trim (item, type and location) ___________________________________________________________________________________________
Additional information
17. Windows
Windows type ___________________
Glass grade ___________________

make _______________________ material ________________________ sash thickness ____________
sash weights

Trim type ______________________

balances, type _______________________

head flashing ______________

material ___________________________ Paint _______________________ number coats ___________

Weatherstripping type ______________________________________ material ______________________________ Storm sash, number _______
Screens

full

half

type ___________________________ number _________ screen cloth material ____________________________

Basement windows type ___________________

material ___________________

screens, number ___________ Storm sash, number _______

Special windows ____________________________________________________
Additional information
18. Entrances and Exterior Detail
Main entrance door

material _____________________ width ________

thickness _____

Frame material ______________ thickness ______

Other entrance doors material _____________________ width ________

thickness _____

Frame material ______________ thickness ______

Head flashing __________________________________ Weatherstripping type _________________________ saddles _____________________
Screen doors thickness _______ number __________

screen cloth material ______________ Storm doors thickness ______

number ________

Combination storm and screen doors thickness _______ number _______ screen cloth material ________________________________________
Shutters

hinged

fixed

Railings _______________________________

Attic louvers ______________

Exterior millwork grade and species ___________________________________Paint ____________________________

number coats ________

Additional information
19. Cabinets and Interior Detail
Kitchen cabinets, wall units material _______________________________________________ lineal feet of shelves _______ shelf width _________
Base units material _____________________________ counter top ____________________________ edging _________________________
Back and end splash ___________________________ Finish of cabinets ____________________________________ number coats ________
Medicine cabinets make ___________________________________________

model _________________________________________________

Other cabinets and built-in furniture __________________________________________________________________________________________
Additional information
Retain this record for three years

Page 3 of 6

ref. HUD Handbook 4145.1 & 4950.1 form HUD-92005 (10/84)
VA Form 26-1852 and form FmHA 424-2

20. Stairs
Treads
Stair

Material

Risers

Thickness

Material

Strings

Thickness

Handrail

Material

Size

Material

Balusters
Size

Material

Size

Basement
Main
Attic
Disappearing make and model number ______________________________________________________________________________________
Additional information

21. Special Floors and Wainscot (Describe Carpet as listed in Certified Products Directory)
Material, Color, Border, Sizes, Gage, Etc.

Threshold
Material

Wall Base
Material

Underfloor
Material

Material, Color, Border, Cap. Sizes, Gage, Etc.

Height

Height
Over Tub

Height in Showers
(From Floor)

Wainscot

Floors

Location

Kitchen
Bath

Location

Bath

Additional information

22. Plumbing
Fixture

Number

Location

Make

MFR's Fixture Identification No.

Size

Color

Sink
Lavatory
Water closet
Bathtub
Shower over tub
Stall shower
Laundry trays

Bathroom accessories

Recessed material ________________

number ________

Attached material __________ number _________

Additional information

Curtain rod
Water supply

Door
public

Sewage disposal

community system

public

House drain (inside)
Water piping

* (Show and describe individual system in complete detail in separate
Shower pan material _______________________________________________________________________

community system

cast iron

galvanized steel

tile

drawings and specifications according to requirements.)

individual (private) system*
individual (private) system*

other _________________

copper tubing

House sewer (outside)

cast iron

other ___________________________ _______

tile

other _________

Sill cocks, number ___________

Domestic water heater type ___________________ make and model ________________________ heating capacity _______________ gph. 100° rise.
Storage tank material _______________________________________ capacity __________ gallons
Gas service

utility company

Footing drains connected to

liq. pet. gas
storm sewer

capacity _____________________________

other _____________________________
sanitary sewer

dry well

Gas piping

cooking

house heating

Sump pump make and model ________________________

discharges into _________________________________________

Additional information

Retain this record for three years

Page 4 of 6

ref. HUD Handbook 4145.1 & 4950.1 form HUD-92005 (10/84)
VA Form 26-1852 and form FmHA 424-2

23. Heating
Hot water

Steam

Radiators

Convectors

Radiant panel
Circulator

Vapor

One-pipe system

Baseboard radiation

floor

wall

ceiling

Two-pipe system

Make and model ______________________________________________________
Panel coil material _____________________________________________________

Return pumpMake and model __________________________________________________

Boiler make and model _____________________________________________

capacity _________ gpm.

Output _______________ Btuh. net rating ___________ Btuh.

Additional information
Warm air

Gravity

Forced

Type of system __________________________________________________________________________

Duct material supply _________________

return _________________ Insulation __________

Furnace: make and model _____________________________________________

thickness ________

Outside air intake

Input _______________ Btuh. output ______________ Btuh.

Additional information
Space heater

floor furnace

wall heaterInput ______________ Btuh. output _______________ Btuh. number units ______________

Make, model __________________________________
Additional information
Controls make and types ___________________________________________________________________________________________________
Additional information

Fuel:

Coal

oil

gas

liq. pet. gas

electric

other _______________________

storage capacity _____________

Additional information

Firing equipment furnished separately
Oil burner

pressure atomizing

Gas burner, conversion type

Stoker hopper feed

bin feed

vaporizing ________________________________________________________________________________

Make and model _________________________________________________________________________________________________________

Control _____________________________________________________________________________________________________________________
Additional information
Electric heating system type ________________________________________ Input ________ watts @ ________ volts output ____________ Btuh.
Additional information
Ventilating equipment

attic fan, make and model ________________________________________________

capacity __________ cfm.

kitchen exhaust fan, make and model ______________________________________________________________
Other heating, ventilating, or cooling equipment ________________________________________________________________________________
Additional information
24. Electric Wiring
Service

overhead

Wiring

conduit

Special outlets
Doorbell

range
Chimes

underground

Panel

armored cable
water heater

fuse box

nonmetallic cable

circuit-breaker make ______________ AMP's _______ No. circuits ___
knob and tube

other ____________________________________

other __________________________________________________________

Push-button locations ________________________________________________________________________

Additional information

25.Lighting Fixtures
Total number of fixtures ________________ Total allowance for fixtures, typical installation, $ ____________________
Nontypical installation ____________________________________________________________________________________________________
Additional information

Retain this record for three years

Page 5 of 6

ref. HUD Handbook 4145.1 & 4950.1 form HUD-92005 (10/84)
VA Form 26-1852 and form FmHA 424-2

26. Insulation
Location

Thickness

Material, Type, and Method of Installation

Vapor Barrier

Roof
Ceiling
Wall
Floor

27. Miscellaneous: (Describe any main dwelling materials, equipment, or construction items not shown elsewhere; or use to provide additional information
where the space provided was inadequate. Always reference by item number to correspond to numbering used on this form.)

Hardware (make, material, and finish.)

Special Equipment (State material or make, model and quantity. Include only equipment and appliances which are acceptable by local law, custom and
applicable FHA standards. Do not include items which, by established custom, are supplied by occupant and removed when he vacates premises or chattles
prohibited by law from becoming realty.)

Porches

Terraces

Garages

Walks and Driveways
Driveway width _________

base material _________________ thickness _______

Front walk width ________

material ______________ thickness ______ Service walk width _______

Steps material ______________________________ treads _______

risers ______

surfacing material ____________________ thickness ______
material __________ thickness ______

Cheek walls ____________________________________

Other Onsite Improvements
(Specify all exterior onsite improvements not described elsewhere, including items such as unusual grading, drainage structures, retaining walls, fence,
railings, and accessory structures.)

Landscaping, Planting, and Finish Grading
Topsoil _______ thick

front yard

Lawns (seeded, sodded, or sprigged)
Planting

side yards

rear yard to ________________

front yard _______________

as specified and shown on drawings

feet behind main building

side yards _______________

rear yard ___________________

as follows:

_______ Shade trees deciduous__________ caliper

_________ Evergreen trees _____________ to _____________ B & B

_______ Low flowering trees deciduous

_________ to _________

_________ Evergreen shrubs _____________ to _____________ B & B

_______ High-growing shrubs deciduous

_________ to _________

_________ Vines, 2-year ____________________________________

_______ Medium-growing shrubs deciduous

_________ to _________

_______ Low-growing shrubs deciduous

_________ to _________

Other

Identification—This exhibit shall be identified by the signature of the builder, or sponsor, and/or the proposed mortgagor if the latter is known at the time
of application.
Date (mm/dd/yyyy)______________________________
Signature
Signature

Retain this record for three years

Page 6 of 6

ref. HUD Handbook 4145.1 & 4950.1 form HUD-92005 (10/84)
VA Form 26-1852 and form FmHA 424-2