May 12, 2006
MEMORANDUM FOR Barbara M. LoPresti
Chief, Technologies Management Office
From: Alan R. Tupek
Chief, Demographic Statistical Methods Division
Subject: Consumer Expenditure Quarterly (CEQ) Survey Reinterview - Specifications for the Computer Assisted Personal Interview (CAPI) Quality Control (QC) Reinterview Blaise Instrument - 2007 Revisions
I. Purpose
This memorandum documents final specifications for the CAPI QC reinterview instrument for the CEQ Survey 2007 Reinterview. Data collection will begin in April 2007. These specifications are for a Blaise instrument. Use these specifications in conjunction with the memorandum, Specifications for a Generic Computer Assisted Personal Interview (CAPI) Quality Control (QC) Reinterview Blaise Instrument.
II. Quality Control Reinterview
CAPI original interviews and Type B and C noninterviews are eligible for a QC reinterview. The goal of the QC reinterview is to detect falsification by the field representatives or supervisory field representatives ((S)FRs). The reinterview instrument includes paths for telephone reinterviews and personal visit reinterviews.
III. Instrument Specifications
We have broken down our specifications for the generic QC reinterview instrument into three major parts. The front specifications, Section XIII, include the screens that direct the reinterviewer to make contact, introduce himself/herself, and ask for the respondent. The middle specifications, Section XIV, include the roster verification screens and the survey specific questions used to determine whether falsification occurred. The back specifications, Section XV, include the thank you screens and the screens that set up callbacks, assign reinterview dispositions, and wrap up the case.
This memorandum includes in Sections XIII-XV only those screens that are new or have changes to the generic specifications. For your convenience, we identify changes on the generic screens by highlighting any additions and striking out any deletions. Since these specifications are also very similar to those previously issued for the 2000 Sample Redesign, we identify the 2007 revisions (additions and deletions) to the 2000 Sample Redesign reinterview specifications by placing those highlights and strikeouts within braces {}.
As in the generic specifications, we divide the display of each screen’s info pane into the text section and the answer list section. Any text given in italics in the text section denotes read only information that is not said aloud by the reinterviewer. Display this text in regular font and in blue on the screen.
Attachment A, Reinterview Instrument Screen Index, lists the page number(s) of each screen displayed in these specifications. Attachment B, CEQ Reinterview Blaise Instrument Flowcharts, displays the pathing of the screens in the front, middle and back portions of the instrument. Attachment C, CEQ Reinterview Instrument Flowchart Index, offers an index of the screens in the flowcharts.
IV. Record-Typed Reinterview Input File
Attachment D contains the format of the Reinterview Sample Control Input File (SCIF) for the CEQ Survey 2007 Reinterview. This Reinterview SCIF lists all of the variables by record type that are on the reinterview input file. The original instrument needs to set or initialize these variables, except for the few that are set by the Demographic Statistical Methods Division (DSMD) reinterview system. DSMD’s reinterview system creates the reinterview input files.
Refer to the CEQ Reinterview SCIF in Attachment D for information regarding the description, length, and values of each of the variables required for reinterview. Record Type 8500 in Attachment D shows generic household level variables in positions 1-83 and generic person level variables in position 1-90. CEQ Survey specific household and person level variables follow these positions, respectively.
The following is a list of only those reinterview input file variables utilized in the CEQ 2007 reinterview instrument. These variables are used either to "fill" entries on the screen or to control pathing. The original instrument must set and output these variables, except for SURVEY_SET, which is set by DSMD. Some of these variables are used in the generic portions of the reinterview instrument. If the CEQ Survey uses a different name for any of these generic variables, the CEQ name is noted in the ‘Description’ column. Convert the variable’s CEQ name to its generic name in the manipula script when extracting the original output for reinterview.
Name |
Description |
Record Type |
RESPNAME |
Respondent name |
1002 |
AREA |
Respondent’s phone number area code |
1002 |
PREFIX |
Respondent’s phone number prefix |
1002 |
SUFFIX |
Respondent’s phone number suffix |
1002 |
EXTN |
Respondent’s phone extension |
1002 |
HNO |
Address - house number |
2006 |
HNOSUF |
Address - house number suffix |
2006 |
STRNAME |
Address - street name combined |
2006 |
UNITDES |
Address - unit designation |
2006 |
GQUNITINFO |
Address - GQ unit designation |
2006 |
NONCITYADD |
Address - non-city style address |
2006 |
PHYSDES |
Address - physical description |
2006 |
PO |
Address - locality |
2006 |
ST |
Address - state abbreviation |
2006 |
ZIP5 |
Address - ZIP code |
2006 |
ZIP4 |
Address - ZIP4 |
2006 |
BLDGNAME |
Address - building name |
2006 |
INTNMBR |
Interview number |
2552 |
ORIOUT |
Original outcome code - See Attachment E for values * OUTCOME in CEQ original instrument - Convert OUTCOME to ORIOUT in manipula script |
2552 |
ORIFR |
Original FR code of (S)FR who completed the case * INTID in CEQ original instrument - Convert OUTCOME to ORIOUT in manipula script |
2552 |
CP1NAME1 |
Contact person 1’s name |
8001 |
CP1TITL1 |
Contact person 1’s title |
8001 |
CP1PHON1 |
Contact person 1’s phone number |
8001 |
CP1EXT1 |
Contact person 1’s phone extension |
8001 |
CP1PHT1 |
Type of phone for contact person |
8001 |
CP1ADD11Contact person 1’s address 1 |
8001 |
|
CP1ADD21 |
Contact person 1’s address 2 |
8001 |
CP1PO1 |
Contact person 1’s address - PO/city |
8001 |
CP1ST1 |
Contact person 1’s address - state |
8001 |
CP1ZP51 |
Contact person 1’s address - ZIP code |
8001 |
CP1ZP41 |
Contact person 1’s address - ZIP4 |
8001 |
BESTTIME |
Best time to call |
8200 |
BESTTIM2 |
Best time other |
8200 |
NOSUNDAY |
Do not call on Sunday |
8200 |
PHTYP |
Type of phone for respondent or household |
8200 |
SPHONE |
Second phone number of respondent or household |
8200 |
SPHEXT |
Second phone number’s extension |
8200 |
SPHTYP |
Type of phone for second phone number |
8200 |
BYOBS1 |
Original case classified as a noninterview by: 1 = Observation only 2 = Information provided by contact person 0 or empty = Question not asked for an interview or Type A case |
8500 (HH level) |
INTDATE |
Original interview date |
8500 (HH level) |
TYPEA_SP |
Other Type A noninterview - write-in * TYPEASP in CEQ original instrument - Convert TYPEASP to TYPEA_SP in manipula script |
8500 (HH level) |
TYPEB_SP |
Other Type B noninterview - write-in |
8500 (HH level) |
TYPEC_SPOther Type C noninterview - write-in |
8500 (HH level) |
|
NUMHOUSE |
Number of persons in primary CU |
8500 (HH level) |
TOTAL_CU |
Number of CUs |
8500 (HH level) |
REF_MONTH |
Reference month |
8500 (HH level) |
LANGUAGE |
Language used to conduct interview |
8500 (HH level) |
RESPON |
Line number of primary respondent |
8500 (HH level) |
{SURVEY_SET |
Group number of section questions selected for reinterview |
8500 (HH level)} |
NROSIZE |
Number of records for Block 01 (HH roster size) |
8500 (person level) |
LNO |
HH composition - line number * MEMBNO in CEQ original instrument - Convert MEMBNO to LNO in manipula script |
8500 (person level) |
QCRESP |
A flag indicating which household members are the respondents for complete original interviews. Place this flag on each person record. In the reinterview, the original respondent (that is, the person the (S)FR actually spoke to) is reinterviewed whenever possible. Values for this flag are: 1 = person (S)FR spoke to 0 = all other household members |
8500 (person level) |
FNAME |
HH composition - first name |
8500 (person level) |
LNAME |
HH composition - last name |
8500 (person level) |
AGE |
HH composition - age |
8500 (person level) |
REL |
HH composition - relationship * CU_CODE in CEQ original instrument - Convert CU_CODE to REL in manipula script |
8500 (person level) |
SEX |
HH composition - sex |
8500 (person level) |
MEMBSTAT |
Household status flag |
8500 (person level) |
PERSTAT |
Status - delete/reinstate |
8500 (person level) |
AWAY_COL |
HH composition - away at college |
8500 (person level) |
HH_MEM |
HH composition - HH member |
8500 (person level) |
PERCUNUM |
HH composition - CU number |
8500 (person level) |
V. Variables Set in Reinterview Instrument
A. The generic portions of the reinterview instrument use the following variables. Set these variables in the CEQ reinterview instrument as follows.
RPROXY_A This is a flag indicating whether a proxy is allowed in the reinterview. Set to
1 = proxy allowed in reinterview
OPROXY_A This is a flag indicating whether a proxy interview is allowed in the original survey. Set to
1 = proxy allowed in original interview
OPROXY_U This is a flag indicating for which household member a proxy was used in the original interview. However, since CE does not verify the eligibility of proxy, this flag is not set in the original instrument. Set
OPROXY_U = 0
SURVEY_NAME This is a string variable (200 characters in length) indicating the name of the survey. Set to
Consumer Expenditure Quarterly Survey
USE_CKSUP This is a string variable (three characters in length) indicating if the (S)FR needs authorization before conducting a personal visit due to budget concerns. Set to
Yes = (S)FR needs authorization
<DISCREPANCY> This is an array of 12 elements. It contains a list of codes indicating the various discrepancies found during the reinterview. When the reinterview instrument indicates a discrepancy, the instrument will store the appropriate code in this array. Upon wrapping up a case, the DISCREPANCY array is copied into the Reinterview Notes.
ORIOUT_RSLT This is a string variable (four characters in length) indicating the type of original outcome for a case. Set as follows:
If ORIOUT = 201 or 203, then ORIOUT_RSLT = INT.
If ORIOUT = 216, 217, 219, 321, 322, 323 or 324, then ORIOUT_RSLT = A.
If ORIOUT = 224, 225, 226, 228, 229, 231, 232, 331, or 332, then ORIOUT_RSLT = B1.
If ORIOUT = 233, then ORIOUT_RSLT = B2.
If ORIOUT = 240, 241, 243, 244, 245, 246 or 252, then ORIOUT_RSLT = C1.
If ORIOUT = 248, 341 or 342, then ORIOUT_RSLT = C2.
TYPE_D This is a string variable (three characters in length) indicating if the original survey has original Type D noninterviews. Set to
No = original survey does not have original Type D noninterviews.
VACANT_INT This is a string variable (three characters in length) indicating if the survey has vacant interviews. Set to
No = survey does not have vacant interviews.
REDESIGN This is a string variable (three characters in length) indicating if the survey has converted to the 2000 Sample Redesign. Set to
Yes = survey has converted to the 2000 Sample Redesign.
PUERTO_RICO This is a string variable (three characters in length) indicating if the survey includes Puerto Rico addresses. Set to
No = survey does not include Puerto Rico addresses.
PV_ONLY This is a string variable (three characters in length) indicating if the survey requires all original interviews to be conducted by personal visit. Set to
Yes = All original interviews must be done by personal visit.
MIN_AGE This is a numeric variable (two characters in length) indicating the minimum age for an eligible respondent. Set to
16 = minimum age for an eligible respondent
CONTACT_C_INFO(1-3) This is a three string variable (80 characters in length each) indicating some descriptive text for the survey to be filled on the CONTACT_C screen. Set to
CONTACT_C_INFO1 = household expenditures for the Consumer Expenditure Quarterly Survey?
CONTACT_C_INFO2 is empty
CONTACT_C_INFO3 is empty
ROSTER_INFO(1-3) This is a three string variable (80 characters in length each) indicating some descriptive text for the survey to be filled on the ROSTER_3 and ROSTER_4 screens. Set to
ROSTER_INFO1 = didn’t have a usual residence elsewhere or who wasn’t away at college
ROSTER_INFO2 = on [Fill: INTDATE]
ROSTER_INFO3 is empty
TYPEB_SPLIT This is a string variable (three characters in length) indicating if reinterview noninterview vacants and Usual Residence Elsewhere (UREs) need to be split between regular and seasonal. Set to
No = vacants and UREs are not split between regular and seasonal
RIDATE This is the date stamp that the CEQ reinterview instrument marks when a case is opened. Its format is mmddyyyy.
TIME_C This is the time stamp that the CEQ reinterview instrument marks when a case is opened. Its format is hhmmss in military time.
OIRESP This is a string variable (two characters in length) representing the line number of the original respondent. Set to the line number (LNO) of the household member with QCRESP = 1.
SPANONLY This is a string variable (one character in length) indicating if the household is Spanish speaking. Set as follows:
If LANGUAGE = 2, then SPANONLY = 1.
Else SPANONLY is empty.
B. The original instrument fills RESPNAME if the respondent is a proxy. To compensate for this, empty RESPNAME if RESPON = 95.
C. Set the generic contact person information variables in the CEQ reinterview instrument as follows:
CPNAME = CP1NAME
CPTITL = CP1TITL
CPPHON = CP1PHON
CPEXT = CP1EXT
CPPHT = CP1PHT
CPADD1 = CP1ADD1
CPADD2 = CP1ADD2
CPPO = CP1PO
CPST = CP1ST
CPZP5 = CP1ZP5
CPZP4 = CP1ZP4
D. The following variables are also set in the CEQ reinterview instrument according to the SPECIAL INSTRUCTIONS for screens in either these specifications or the generic specifications.
Name |
Description |
INTTYP |
Method of reinterview
T = telephone reinterview P = personal visit reinterview |
LENGTH_T |
Length of the original interview in total minutes - (LENGTH_H x 60) + LENGTH_M |
INCT_CNT |
Tally of the number of persons incorrectly included on the household roster |
MISS_CNT |
Tally of the number of persons missing from the household roster |
ITERATION |
Counter for the number of CUs checked |
COUNT |
Number of persons in the CU being checked |
DEPENDENT |
Tally of the number of categories showing dependency in a single-person CU |
INDEPENDENT |
Tally of the number of categories showing independency in a multi-person CU |
INCT_CU |
Tally of the number of CU’s incorrectly formed |
OUTCOME |
Reinterview case status - see Attachment F for values |
RI_DISP |
Reinterview disposition code - see Attachment F for values |
VI. Variables Passed between Case Management and the CEQ Reinterview Instrument
A. Variables from Case Management
1. Case Management sets ACTION based on OUTCOME. See Attachment F, CEQ Reinterview Disposition, Outcome and Action Codes, for values. This variable must be included in the reinterview output.
2. The CEQ reinterview instrument obtains the name of the (S)FR, variable FR_NAME, from Case Management.
3. The CEQ reinterview instrument obtains the reinterviewer’s FR code, FRCODE, from Case Management. If the RO reassigns a case, it changes FRCODE in ROSCO. Case Management then passes the updated variable to the CEQ reinterview instrument.
B. Variables from Case Management and the CEQ Reinterview Instrument
1. The reinterviewer can update the sample unit phone number (AREA, PRFIX, SUFFIX, EXTN) and appointment time (CALLBACK) in both Case Management and the CEQ reinterview instrument. Case Management and the CEQ reinterview instrument pass these variables, with any updates, back and forth to each other.
2. Case Management and the CEQ reinterview instrument also pass the case ID (CASEID) and control number (CTRLNUM) back and forth to each other. These variables serve as identifiers for the case.
C. Variables from the CEQ Reinterview Instrument
1. The reinterviewer can also update the contact person phone number (CPPHON and CPEXT) in the CEQ reinterview instrument. The CEQ
reinterview instrument passes these variables, with any updates, to Case Management. The CEQ reinterview instruments must reset these variables back to either CP1PHON and CP1EXT when it passes them to Case Management.
2. CEQ The reinterview instrument sets OUTCOME and RI_DISP, as stated in Section V, above, and passes them to Case Management.
VII. Formats for Date and Time Variables
A. Use the long format (day of week, month, day, four-digit year) to display all date variables in the reinterview instrument. Use the format mmddyyyy when outputting all date variables, INTDATE (original interview date) and RIDATE (reinterview date), to the reinterview output file.
B. Use the format hh:mm am/pm to display all time variables in the reinterview instrument.
VIII. Displaying the Sample Unit Address
Display the sample unit address is the CEQ reinterview instrument using format ADDRESS1. Screens that display the sample unit address are START, DIAL, INTRO_TC, HELLO_TNX, INTRO_TN, INTRO_PC, HELLO_PNX, ADDVER, INTRO_PN, VERBYOBS, PROX_N, PROX_UN, ROSTER_1, SOMEONE_ELSE, CONTACT_N, VACANT, STAT_VER, VACANT2, STATUS, STAT_PROBE, STAT_PROB2,
Format ADDRESS1 is used for surveys that have converted to the 2000 Sample Redesign (REDESIGN = Yes) and do not include Puerto Rico addresses (PUERTO_RICO = No). Format ADDRESS1 uses the address variables on Record Type 2006 of the SCIF, Demographic Address, and is defined as follows:
[Fill: HNO HNOSUF STRNAME UNITDES]
[Fill: BLDGNAME / blank]
[Fill: GQUNITINFO / blank]
[Fill: NONCITYADD / blank]
[Fill: PHYSDES / blank]
[Fill: PO, ST ZIP5-ZIP4]
FILL INSTRUCTIONS
1. If BLDGNAME not empty, fill BLDGNAME.
Else leave blank, do not display item.
2. IF GQUNITINFO not empty, fill GQUNITINFO.
Else leave blank, do not display item.
3. If NONCITYADD not empty, fill NONCITYADD.
Else leave blank, do not display item.
4. If PHYSDES not emply, fill PHYSDES.
Else leave blank, do not display item.
IX. Displaying the Household Roster
A. Display the household roster in the CEQ reinterview instrument as follows:
Include all persons who have not been deleted in the original interview.
Exclude a person from the household roster if:
PERSTAT = 7 or 99. This denotes a person deleted in the current interview period (7) or a person the interviewer realizes he/she mistakenly listed when entering the household roster (99).
or
MEMSTAT = 1 and PERSTAT 9. This denotes a person deleted in a previous interview period and not reinstated in the current interview period.
List household members first (HH_MEM = 1), followed by non-household members (HH_MEM = 2). Gray the listing of all non-household members.
Do not leave blank lines between persons included in the household roster. Rather, condense the listing to compensate for any deleted person.
Generic screens that display the household roster are: HHCOMP, RIRESP, ROSTER_1, ROSTER_2, ROSTER_3, and ROSTER_4.
B. Other CEQ Survey specific screens that display the household roster are SINGLE_RELATED, SINGLE_HOUSING, SINGLE_FOOD, SINGLE_OTHER, MULTI_RELATED, MULTI_HOUSING, MULTI_FOOD, and MULTI_OTHER. These screens have the additional specifications:
List only household members (HH_MEM=1).
Gray any household member whose PERCUNUM ITERATION.
X. Access to Original CAPI Notes and Reinterview Notes
Within the CEQ reinterview instrument, provide access between the instrument and the original CAPI notes and the reinterview notes. Both the original CAPI notes and the reinterview notes are separate text files maintained outside the instrument.
Allow the reinterviewer access to only view the original CAPI notes.
Allow the reinterviewer access to enter, view, or edit the reinterview notes.
XI. Function Keys
Descriptions of the functions keys are listed below. These keys comply with the listing of Keys Assignments for Consumer Expenditures Survey, dated July 25, 2000.
The "F" Keys
F1
F2
F3
F4
F5
F6
F7 Item notes/remarks
F8
F9
F10 Exit - Skip to the END of the reinterview (FIN screen)
F11
F12
The "Shift-F" Keys
Shift-F1 Display the household roster (HHCOMP screen)
Shift-F2 Display the Original Survey Frequently Asked Questions (FAQs) (H_PURPOSE screen)
Shift-F3 Display the Reinterview FAQs (RIREASON screen)
Shift-F4
Shift-F5
Shift-F6
Shift-F7
Shift-F8
Shift-F9
Shift-F10
Shift-F11 Display standard abbreviations (H_ABBREVI screen)
Shift-F12 Display original CAPI notes
The "Ctrl" Keys
Ctrl-D Don’t know (D)
Ctrl-K Display function key descriptions (KEY_REF screen)
Ctrl-R Refusal (R)
Ctrl-F7 Access reinterview notes
Special Purpose Keys
Esc Cancel
Home Moves to beginning of form
End Moves to first unanswered field on path
Page Up Moves backward one page/screen
Page Down Moves forward one page/screen
Up Arrow Move upward or backward one field
Down Arrow Moves downward or forward one field
Left Arrow Moves to previous field
Right Arrow Moves to next field
XII. Refreshing OUTCOME = 202 Cases
If the CEQ reinterview instrument is exited with OUTCOME=202, refresh the case upon reopening the instrument. Always maintain the reinterview input file variables and any updates to them (example, phone number changes) when the instrument is reopened. Also maintain CALLBACK and the case’s history in Case Management.
XIII. Front Specifications
The screens for the front of the instrument appear in this section.
UNIVERSE - RIREASON = 3
Don't you have anything better to do with my tax dollars? I'm too busy to answer your questions again.
The Bureau of Labor Statistics uses the data from this survey to measure the changes in prices in consumer goods and services. Information collected in this survey contributes to the Consumer Price Index, which assesses the change in purchasing power of consumer dollars. The Census Bureau’s method of measuring data quality for this survey is to re-contact a percentage of respondents to check that the data was collected correctly during the original interview. We believe this method helps the Census Bureau prevent the wasting of your tax dollars.
|
1. Continue 2. Back to Reinterview Help Menu |
• |
Name |
Description |
Value |
Skip |
|
RIREF3 |
Reason 3 |
1 |
[return to reinterview] |
|
|
|
2 |
[goto RIREASON] |
----------------------------------------------------------------------------------------------------------------------
UNIVERSE - Shift-F2 or
H_PURPOSE1-n = 2
Frequently Asked Questions
Press F8 to proceed with reinterview. |
1. What is this survey all about? 2. Who uses this information? What good is it? 3. How is the data collected? How many times will I be interviewed? 4. I hesitate to tell some things about myself. What protection do I have? 5. Is this survey authorized by law? 6. Return to reinterview |
• |
Name |
Description |
Value |
Skip |
|
H_PURPOSE |
Frequently asked questions |
1 |
[goto H_PURPOSE1] |
|
|
|
2 |
[goto H_PURPOSE2] |
|
|
|
3 |
[goto H_PURPOSE3] |
|
|
|
4 |
[goto H_PURPOSE4] |
|
|
|
5 |
[goto H_PURPOSE4] |
|
|
|
6 |
[return to reinterview] |
SPECIAL INSTRUCTIONS
This screen is a reference screen accessed by the Shift-F2 key.
This FAQ menu screen is the same as that in the original instrument.
----------------------------------------------------------------------------------------------------------------------
UNIVERSE - H_PURPOSE = 1
What is this survey all about?
The consumer expenditure survey collects information from the nation's households and families on their buying habits (expenditures), income, and characteristics. The strength of the survey is that it allows data users to relate the expenditures and income of consumers to the characteristics of those consumers.
|
1. Continue 2. Back to Frequently Asked Questions? menu |
• |
Name |
Description |
Value |
Skip |
|
H_PURPOSE1 |
Frequent question 1 |
1 |
[return to reinterview] |
|
|
|
2 |
[goto H_PURPOSE] |
SPECIAL INSTRUCTIONS
Use the same FAQ as H_PURPOSE1 in the original instrument.
----------------------------------------------------------------------------------------------------------------------
UNIVERSE - H_PURPOSE = 2
Who uses this information? What good is it?
Data from the consumer expenditure survey are used in a number of different ways by a variety of users. An important use of the survey by the bureau of labor statistics is for the periodic revisions of the consumer price index (cpi). Survey results are used to select new market basket of goods and services for the cpi, to determine the relative importance of cpi components, and to derive new cost weights for the market basket.
Government and private agencies use the data to study the welfare of particular segments of the population. Economic policymakers use the data to study the impact of policy changes in the welfare of different socioeconomic groups. Researchers use the data in a variety of studies, including those that focus on the spending behavior of different family types and historical spending trends.
|
1. Continue 2. Back to Frequently Asked Questions? menu |
• |
Name |
Description |
Value |
Skip |
|
H_PURPOSE2 |
Frequent question 2 |
1 |
[return to reinterview] |
|
|
|
2 |
[goto H_PURPOSE] |
SPECIAL INSTRUCTIONS
Use the same FAQ as H_PURPOSE2 in the original instrument.
----------------------------------------------------------------------------------------------------------------------
UNIVERSE - H_PURPOSE = 3
How is the data collected? How many times will I be interviewed?
Data collection is carried out by the bureau of the census. In the interview survey, each consumer unit is interviews every 3 months over 5 calendar quarters. In the initial interview, information is collected on demographic and family characteristics and on the inventory of major durable goods of the consumer unit. Expenditure information is collected in the second through fifth interview using uniform questionnaires. In the fifth interview, a supplement is used to account for changes in assets and liabilities.
|
1. Continue 2. Back to Frequently Asked Questions? menu |
• |
Name |
Description |
Value |
Skip |
|
H_PURPOSE3 |
Frequent question 2 |
1 |
[return to reinterview] |
|
|
|
2 |
[goto H_PURPOSE] |
SPECIAL INSTRUCTIONS
Use the same FAQ as H_PURPOSE3 in the original instrument.
----------------------------------------------------------------------------------------------------------------------
UNIVERSE - H_PURPOSE = 4
I hesitate to tell some things about myself. What protection do I have?
The information that respondents provide is used solely for statistical purposes. All census bureau data collectors take an oath of confidentiality and are subject to fines and imprisonment for improperly disclosing information provided by respondents. Names and addresses are removed from all forms and that information is not released as part of any statistical data.
|
1. Continue 2. Back to Frequently Asked Questions? menu |
• |
Name |
Description |
Value |
Skip |
|
H_PURPOSE4 |
Frequent question 2 |
1 |
[return to reinterview] |
|
|
|
2 |
[goto H_PURPOSE] |
SPECIAL INSTRUCTIONS
Use the same FAQ as H_PURPOSE4 in the original instrument.
----------------------------------------------------------------------------------------------------------------------
UNIVERSE - H_PURPOSE = 5
Is this survey authorized by law?
The Bureau of Labor Statistics conducts the Consumer Expenditure Survey under the authority of Title 29 of the U.S. Code. Congress authorizes the financial support for the CE survey through Public Laws 94-439 and 95-205.
The Bureau of the Census collects the CE data under the authority of Title 13, U.S. Code, Section 8b, which allows the Census Bureau to undertake surveys for other government agencies. Participation in the survey is voluntary. Under Title 13, the Census Bureau holds all information in strict confidence. We will not release information reported in the survey which would permit the identification of a household or any of its members to anyone outside of the Census Bureau.
|
1. Continue 2. Back to Frequently Asked Questions? menu |
• |
Name |
Description |
Value |
Skip |
|
H_PURPOSE5 |
Frequent question 2 |
1 |
[return to reinterview] |
|
|
|
2 |
[goto H_PURPOSE] |
SPECIAL INSTRUCTIONS
Use the same FAQ as H_PURPOSE5 in the original instrument.
----------------------------------------------------------------------------------------------------------------------
UNIVERSE - OUTCOME = 200 [to access case] or
OUTCOME = 202 (i.e. insufficient partial) or OUTCOME = 213-219 (i.e. Type A) [to reaccess case]
Note: This UNIVERSE is not used by the instrument, but rather controlled by Case Management.
[Fill: SURVEY_NAME] CAPI Quality Control Reinterview
Date: [Fill: RIDATE] Time: [Fill: TIME_C]
Reinterview Case Status: [Fill: OUTCOME and OUTCOME’s description]
Original Interview Date: [Fill: INTDATE]
Original FR Code - Name: [Fill: ORIFR] "-" [Fill: FR_NAME] Original Outcome: [Fill: ORIOUT and ORIOUT’s description] [Fill: TYPEA_SP / TYPEB_SP / TYPEC_SP /blank] Original Respondent Name: [Fill: RESPNAME] Sample Unit Phone: ([Fill: AREA]) [Fill: PREFIX]-[Fill: SUFFIX], ext.[Fill: EXTN] ([Fill: PHTYPE PHTYP’s description]) [Fill: "Second Phone:" SPHONE (SPHTYP’s descsription) / blank] Sample Unit Address: [Fill: ADDRESS1 / ADDRESS2 / ADDRESS3 / ADDRESS4]
[Fill: "Best Time to Contact:" BESTTIME’s description / "Best Time to Contact:" BESTTIM2 / blank] [Fill: "Or" BESTTIM2 / blank]
[Fill: “DO NOT call on Sunday” / blank]
[Fill: “Spanish speaking” / blank]
|
1. Continue 2. Quit - Attempt later |
• |
Name |
Description |
Value |
Skip |
|
START |
Start up screen |
1 |
[If ORIOUT_RSLT = B1, C1, B2, C2 or VINT and BYOBS = 2 goto START_1A] [goto START_1] |
|
|
|
2 |
[goto RINOTES_PRE] |
FILL INSTRUCTIONS
1. Fill OUTCOME’s description with the reinterview outcome code description from Attachment F, Reinterview Disposition, Outcome, and Action Codes.
2. Fill ORIOUT’s description with the original outcome code description from Attachment E, "List of Original Outcome Codes in the Original Instrument."
3. If ORIOUT = 219, fill TYPEA_SP.
If ORIOUT = 233, fill TYPEB_SP.
If ORIOUT = 248, fill TYPEC_SP.
Else leave blank, do not display item.
4. If SPHONE not empty, fill "Second Phone:" SPHONE (SPHTYP’s description).
Else leave blank, do not display item.
5. Fill PHTYP’s and SPHTYP’s descriptions with the following descriptions of the values of PHTYP and SPHTYP, respectively:
Values Description
1 HOME
2 WORK
3 Cellular or Digital
4 Beeper/Pager/Answering Service
5 PUBLIC PAY PHONE
6 OTHER
7 FAX
6. If REDESIGN = Yes and PUERTO_RICO = No, fill with format ADDRESS1.
If REDESIGN = No and PUERTO_RICO = No, fill with format ADDRESS2.
If PUERTO_RICO = Yes and PSU 72, fill with format ADDRESS3.
If PUERTO_RICO = Yes and PSU = 72, fill with format ADDRESS4.
7. If BESTTIME not empty, fill "Best Time to Contact:" BESTTIME’s description.
If BESTTIME empty and BESTTIM2 not empty, fill "Best Time to Contact:" BESTTIM2.
If BESTTIME empty and BESTTIM2 empty, leave blank, do not display item.
8. If BESTTIME not empty and BESTTIM2 not empty, fill "Or" BESTTIM2.
Else leave blank, do not display item.
9. Fill BESTTIME’s description with the following descriptions of the values of BESTTIME:
Values Description
00 Special restriction; supervisor sets appointment
01 Morning (9am‑12 noon)
02 Noon/lunchtime (11am ‑ 1pm)
03 Afternoon (12 noon‑4pm)
04 Suppertime/early evening/dinnertime (4pm‑7pm)
05 Evening (6pm‑9pm)
06 Anytime (9am‑9pm)
07 Late evening/night (7pm‑9pm)
08 Daytime (9am‑4pm)
09 After 5pm (5pm‑9pm)
10. If NOSUNDAY = 1, fill “DO NOT call on Sunday.”
Else leave blank, do not display item.
11. If SPANONLY = 1, fill “Spanish speaking.”
Else leave blank, do not display item.
SPECIAL INSTRUCTIONS
If START = 2, set OUTCOME = 202.
------------------------------------------------------------------------------------------------------------------
UNIVERSE - (START_1 = 1 and ORIOUT_RSLT = INT) or
Shift-F1
|
|||||||
Line No. |
Name |
Relationship |
Age |
Sex |
Away at college |
HH member |
CU number |
[Fill: LNO] |
[Fill: FNAME LNAME] |
[Fill: REL] |
[Fill: AGE] |
[Fill: SEX] |
[Fill: AWAY_COL] |
[Fill: HH_MEM] |
[Fill: PERCUNUM] |
• |
• |
• |
• |
• |
• |
• |
• |
• |
• |
• |
• |
• |
• |
• |
• |
Press Shift-F1 to access this screen at any time during the reinterview.
Enter 1 to continue. |
|
|
|||||
1. Continue |
|
|
|||||
• |
Name |
Description |
Value |
Skip |
|
HHCOMP |
Household composition |
1 |
[goto METHOD] |
• SPECIAL INSTRUCTIONS
This screen displays the household roster. Fill REL, SEX, AWAY_COL, and HH_MEM with their descriptions from Attachment G.
Return to reinterview if accessed by the Shift-F1 key.
------------------------------------------------------------------------------------------------------------------
UNIVERSE - (METHOD = 1 and ORIOUT_RSLT = INT) or
(METHOD = 1 and ORIOUT_RSLT = B1, C1, B2, C2 or VINT and BYOBS = 2) or WRNUM = 1 (used for coming back to DIAL) or
REFNUM = 2 (used for coming back to DIAL) or
_END_ = 1 (_END_ is a dummy variable used to update phone number)
Respondent Name: [Fill: RESPNAME] Respondent Address: [Fill: ADDRESS1 / ADDRESS2 / ADDRESS3 / ADDRESS4] / Contact Name: [Fill: CPNAME] Contact Address: [Fill: CPADD1 CPADD2 CPPO, CPST CPZP5-CPZP4]
Dial this number:
([Fill: AREA]) [Fill: PREFIX]-[Fill: SUFFIX], ext. [Fill: EXTN] ([Fill: PHTYPE PHTYP’s description]) / [Fill: CPPHON], ext. [Fill: CPEXT] ([Fill: CPPHT’s description])
|
1. Someone answers 2. Enter new telephone number 3. Reinterview Noninterview 4. Quit - Attempt later |
• |
Name |
Description |
Value |
Skip |
|
DIAL |
Dial phone number |
1 |
[If ORIOUT_RSLT = INT and RESPNAME empty goto HELLO_TCX] [If ORIOUT_RSLT = INT goto HELLO_TC] [If CPNAME empty goto HELLO_TNX] [goto HELLO_TN] |
|
|
|
2 |
[goto _INTRO_] |
|
|
|
3 |
[goto STATUS_RI] |
|
|
|
4 |
[goto RINOTES_PRE] |
• FILL INSTRUCTIONS
1. If ORIOUT_RSLT = INT, fill Respondent Name with RESPNAME. Fill Respondent Address with format ADDRESS1 if REDESIGN = Yes and PUERTO_RICO = No, with format ADDRESS2 if REDESIGN = No and PUERTO_RICO = No, with format ADDRESS3 if PUERTO_RICO = Yes and PSU 72, and with format ADDRESS4 if PUERTO_RICO = Yes and PSU = 72. Dial this number with AREA, PREFIX, SUFFIX, EXTN, PHTYPE PHTYP’s description.
2. If ORIOUT_RSLT = B1, C1, B2, C2 or VINT, fill Contact Name with CPNAME, Contact Address with CPADD1, CPADD2, CPPO, CPST, CPZP5, CPZP4, and dial this number with CPPHON, CPEXT, CPPHT’s description.
3. Fill PHTYP’s and CPPHT’s descriptions with the following descriptions of the values of PHTYP and CPPHT, respectively:
Values Description
1 HOME
2 WORK
3 Cellular or Digital
4 Beeper/Pager/Answering Service
5 PUBLIC PAY PHONE
6 OTHER
7 FAX
SPECIAL INSTRUCTIONS
If DIAL = 4, set OUTCOME = 202.
------------------------------------------------------------------------------------------------------------------
XIV. Middle Specifications
The screens for the middle of the instrument appear in this section. Response choices in italics are blind don’t knows or refusals. Do not show these choices, but allow the reinterviewer to enter Ctrl-D for “don’t know” (D) or Ctrl-R for “refusal” (R), where noted. Output “don’t know” as “9” and fill with preceding “9”s if variable length > 1. Output “refusal” as “8” and fill with preceding “9”s if variable length > 1. If a screen has eight or nine response choices, and allows “don’t know” or “refusal,” the specifications writers must specify length = 2 for the variable to differentiate between a response choice of 8 or 9 and a “don’t know ”(99) or “refusal” (98).
• UNIVERSE - (INTRO_TC = 1, 2 or 3) or
(INTRO_PC = 1, 2 or 3) or
(ADDVER = 1 and RPROXY_A = 1 and ( HELLO_TC = 3 or 5 or HELLO_PC = 2 or 4 or HELLO_TCX = 1 or HELLO_PCX = 1)) or
(SPEAKTO = 1 and CONTACT_C = 2 or D) or
(PROX_UC = 1)
|
|||||||
Line No. |
Name |
Relationship |
Age |
Sex |
Away at college |
HH member |
CU number |
[Fill: LNO] |
[Fill: FNAME LNAME] |
[Fill: REL] |
[Fill: AGE] |
[Fill: SEX] |
[Fill: AWAY_COL] |
[Fill: HH_MEM] |
[Fill: PERCUNUM] |
• |
• |
• |
• |
• |
• |
• |
• |
• |
• |
• |
• |
• |
• |
• |
• |
|
|
|
|
|
|
|
|
Ask if necessary With whom am I speaking? |
|||||||
|
|
|
|
|
|
|
|
Enter line number of person you are speaking to or (0) if person is not on roster. |
|||||||
|
|||||||
• |
Name |
Description |
Value |
Skip |
|
RIRESP |
Reinterview Respondent |
<0 - maximum line number> |
[goto CONTACT_C] |
• SPECIAL INSTRUCTIONS
This screen displays the household roster. Fill REL, SEX, AWAY_COL, and HH_MEM with their descriptions from Attachment G.
------------------------------------------------------------------------------------------------------------------
UNIVERSE - (CONTACT_C = 1 and (INTRO_TC = 1, 2 or 3 or INTRO_PC = 1, 2 or 3)) or
(PROX_PRESENT = 1) or
(CONTACT_N = 1 and (INTRO_TN = 1 or INTRO_PN = 1))
Did the interviewer visit in person or call on the telephone?
|
1. Personal visit only 2. Telephone call only 3. Both - Interviewer visited and called |
• |
Name |
Description |
Value |
Skip |
|
ORMODE |
Interview Mode |
1 |
[goto POLITE] |
|
|
|
2 |
[If CONTACT_C = 1 goto PHONE_REQUEST] [goto POLITE] |
|
|
|
3 |
[goto POLITE] |
|
|
|
Ctrl-D = Don't know |
[goto POLITE] |
SPECIAL INSTRUCTIONS
If ORMODE = 2 and CONTACT_C = 1 and PV_ONLY = Yes, store code 9 in element [9] of DISCREPANCY array.
-------------------------------------------------------------------------------------------------------------------
NEW SCREEN
UNIVERSE - ORMODE = 2 and CONTACT_C = 1
Did you request the telephone interview? |
1. Yes 2. No - Telephone interview requested by interviewer |
• |
Name |
Description |
Value |
Skip |
|
PHONE_REQUEST |
Phone Call Requested |
1 |
[goto POLITE] |
|
|
|
2 |
[goto POLITE] |
|
|
|
Ctrl-D = Don't know |
[goto POLITE] |
SPECIAL INSTRUCTIONS
If PHONE_REQUEST = 2, store code 9 in element [9] of DISCREPANCY array.
-------------------------------------------------------------------------------------------------------------------
UNIVERSE - (ORMODE = 1, 2, 3, or D) or
(ORMODE = 2 and CONTACT_N = 1) or
(PHONE_REQUEST = 1, 2, or D)
Was the interviewer polite and professional?
|
1. Yes 2. No |
• |
Name |
Description |
Value |
Skip |
|
POLITE |
FR Polite/Professional |
1 |
[If CONTACT_C = 1 goto LENGTH_H] [If ORMODE = 1 or 3 goto LAPTOP] [If ORIOUT_RSLT = B2 or C2 goto STAT_PROBE] [If ORIOUT_RSLT = B1 or C1 goto STATUS] [goto VACANT] |
|
|
|
2 |
[goto PO_NOTES] |
|
|
|
Ctrl-D = Don't know |
[If CONTACT_C = 1 goto LENGTH_H] [If ORMODE = 1 or 3 goto LAPTOP] [If ORIOUT_RSLT = B2 or C2 goto STAT_PROBE] [If ORIOUT_RSLT = B1 or C1 goto STATUS] [goto VACANT] |
-------------------------------------------------------------------------------------------------------------------
UNIVERSE - (LENGTH_H = D and ORMODE = 2 or D) or
(LENGTH_M = <0-90> and ORMODE = 2 or D) or
(LAPTOP = 1, 2 or D and CONTACT_C = 1) or
(PROX_PRESENT = 2 and CONTACT_C = 1) or
(CONTACT_C = 2 or D and (HELLO_TCX=1 or HELLO_PCX=1 or PROX_C = 1 or PROX_UC = 1)) or
(SOMEONE_ELSE = 2 or D and CONTACT_C = 2 or D) or
(SPEAKTO = 2 and CONTACT _C = 2 or D)
|
|||||||
Line No. |
Name |
Relationship |
Age |
Sex |
Away at college |
HH member |
CU number |
[Fill: LNO] |
[Fill: FNAME LNAME] |
[Fill: REL] |
[Fill: AGE] |
[Fill: SEX] |
[Fill: AWAY_COL] |
[Fill: HH_MEM] |
[Fill: PERCUNUM] |
• |
• |
• |
• |
• |
• |
• |
• |
• |
• |
• |
• |
• |
• |
• |
• |
|
|
|
|
|
|
|
|
Our records indicate that Read above name(s) in blue was/were living or staying at |
|||||||
[Fill: ADDRESS1 / ADDRESS2 / ADDRESS3 / ADDRESS4]
on [Fill: INTDATE].
Is this correct?
|
|||||||
1. Yes 2. No |
|||||||
• |
Name |
Description |
Value |
Skip |
|
ROSTER_1 |
Roster verification |
1 |
[goto ROSTER_3] |
|
|
|
2 |
[goto ROSTER_2] |
|
|
|
Ctrl-D = Don’t know |
[goto ROSTER_3] |
|
|
|
Ctrl-R = Refusal |
[goto ROSTER_3] |
FILL INSTRUCTIONS
If REDESIGN = Yes and PUERTO_RICO = No, fill with format ADDRESS1.
If REDESIGN = No and PUERTO_RICO = No, fill with format ADDRESS2.
If PUERTO_RICO = Yes and PSU 72, fill with format ADDRESS3.
If PUERTO_RICO = Yes and PSU = 72, fill with format ADDRESS4.
SPECIAL INSTRUCTIONS
This screen displays the household roster. Fill REL, SEX, AWAY_COL, and HH_MEM with their descriptions from Attachment G.
If ROSTER_1 = 2, store code 7 in element [7] of DISCREPANCY array.
-------------------------------------------------------------------------------------------------------------------
UNIVERSE - ROSTER_1 = 2
|
|||||||
Line No. |
Name |
Relationship |
Age |
Sex |
Away at college |
HH member |
CU number |
[Fill: LNO] |
[Fill: FNAME LNAME] |
[Fill: REL] |
[Fill: AGE] |
[Fill: SEX] |
[Fill: AWAY_COL] |
[Fill: HH_MEM] |
[Fill: PERCUNUM] |
• |
• |
• |
• |
• |
• |
• |
• |
• |
• |
• |
• |
• |
• |
• |
• |
|
|
|
|
|
|
|
|
Enter the line number of the household member(s) (above name(s) in blue) who wasn’t/weren’t living or staying at the household on [Fill: INTDATE].
|
|||||||
[Fill: LNO]. [Fill: FNAME LNAME] • • • • • • |
|||||||
• |
Name |
Description |
Value |
Skip |
|
ROSTER_2 |
Roster verification - deletes |
list of line numbers, <1 - maximum line number> |
[goto ROSTER_3] |
SPECIAL INSTRUCTIONS
This screen displays the household roster. Fill REL, SEX, AWAY_COL, and HH_MEM with their descriptions from Attachment G.
Mark all that apply type of entry.
Calculate count of the number of incorrect persons entered, but do not display. Store this value in the variable INCT_CNT.
------------------------------------------------------------------------------------------------------------------------
UNIVERSE - (ROSTER_1 = 1, D or R) or
(Any valid value in ROSTER_2)
|
|||||||
Line No. |
Name |
Relationship |
Age |
Sex |
Away at college |
HH member |
CU number |
[Fill: LNO] |
[Fill: FNAME LNAME] |
[Fill: REL] |
[Fill: AGE] |
[Fill: SEX] |
[Fill: AWAY_COL] |
[Fill: HH_MEM] |
[Fill: PERCUNUM] |
• |
• |
• |
• |
• |
• |
• |
• |
• |
• |
• |
• |
• |
• |
• |
• |
|
|
|
|
|
|
|
|
Have I missed any household member who [Fill: ROSTER_INFO1] [Fill: ROSTER_INFO2] [Fill: ROSTER_INFO3]
|
|||||||
1. Yes 2. No |
|||||||
• |
Name |
Description |
Value |
Skip |
|
ROSTER_3 |
Roster verification - check for adds |
1 |
[goto ROSTER_4] |
|
|
|
2 |
[If LENGTH_H = D or LENGTH_M = <0-90> goto SURVEY_1] [goto THANK_YOU] |
|
|
|
Ctrl-D = Don’t know |
[If LENGTH_H = D or LENGTH_M = <0-90> goto SURVEY_1] [goto THANK_YOU] |
|
|
|
Ctrl-R = Refusal |
[If LENGTH_H = D or LENGTH_M = <0-90> goto SURVEY_1] [goto THANK_YOU] |
SPECIAL INSTRUCTIONS
This screen displays the household roster. Fill REL, SEX, AWAY_COL and HH-MEM with their descriptions from Attachment G.
If ROSTER_3 = 1, store code 7 in element [7] of DISCREPANCY array.
------------------------------------------------------------------------------------------------------------------------
UNIVERSE - ROSTER_3 = 1
|
|||||||
Line No. |
Name |
Relationship |
Age |
Sex |
Away at college |
HH member |
CU number |
[Fill: LNO] |
[Fill: FNAME LNAME] |
[Fill: REL] |
[Fill: AGE] |
[Fill: SEX] |
[Fill: AWAY_COL] |
[Fill: HH_MEM] |
[Fill: PERCUNUM] |
• |
• |
• |
• |
• |
• |
• |
• |
• |
• |
• |
• |
• |
• |
• |
• |
|
|
|
|
|
|
|
|
Enter the name of each missing household member who [Fill: ROSTER_INFO1] [Fill: ROSTER_INFO2] [Fill: ROSTER_INFO3]
Press Enter after each name and again after last name to continue.
|
|||||||
• |
Name |
Description |
Value |
Skip |
|
ROSTER_4 |
Roster verification - adds |
list of up to 15 names |
[If LENGTH_H = D or LENGTH_M = <0-90> goto SURVEY_1] [goto THANK_YOU] |
SPECIAL INSTRUCTIONS
This screen displays the household roster. Fill REL, SEX, AWAY_COL, and HH-MEM with their descriptions from Attachment G.
Mark all that apply type of entry.
Calculate count of the number of missing persons entered, but do not display. Store this value in the variable MISS_CNT.
------------------------------------------------------------------------------------------------------------------------
UNIVERSE - (ROSTER_3 = 2, D or R and (LENGTH_H = D or LENGTH_M = <0-90>)) or
(Any valid value in ROSTER_4 and (LENGTH_H = D or LENGTH_M = <0-90>)) or
VACANT = 1
The Consumer Expenditure Quarterly Survey uses the words consumer unit or CU. A household may contain one CU or more than one CU. A CU may contain one household member or a group of household members.
[Fill: ‘Since our records have you as the only household member, you make up one CU. / “Since our records have [Fill: FNAME LNAME (from only person level record)] as the only household member, he/she makes up one CU.’ / All household members who are related make up a CU. By related I mean by blood, marriage, adoption, or other legal arrangement.
For people who are unrelated, a group of household members make up a CU if they are dependent on one another for payment of their major expenses. A household member makes up his own CU if he is independent of all other household members for payment of his major expenses. By major expenses I mean housing expenses, food expenses, and other living expenses such as clothing, transportation, etc.’]
Press 1 to continue. |
1. Continue |
|
|
Name |
Description |
Value |
Skip |
|
SURVEY_1 |
CU definition |
1 |
[If INCT_CNT 1 or MISS_CNT 1 or NROSIZE = 1 goto TENURE_1] [goto CU_LISTING] |
FILL INSTRUCTIONS
If NROSIZE =1 and RIRESP > 0, fill ‘Since our records have you as the only household member, you make up one CU.’
If NROSIZE =1 and RIRESP = 0, fill ‘Since our records have’ FNAME and LNAME from only person level record ‘as the only household member, he/she makes up one CU.’
Else fill ‘All household members who are related make up a CU. By related I mean by blood, marriage, adoption, or other legal arrangement.
For people who are unrelated, a group of household members make up a CU if they are dependent on one another for payment of their major expenses. A household member makes up his own CU if he is independent of all other household members for payment of his major expenses. By major expenses I mean housing expenses, food expenses, and other living expenses such as clothing, transportation, etc.’
SPECIAL INSTRUCTIONS
If INCT_CNT 1 and MISS_CNT 1 and NROSIZE > 1, set ITERATION = 1 and INCT_CU = 0.
------------------------------------------------------------------------------------------------------------------
NEW SCREEN
Universe - (SURVEY_1 = 1 and INCT_CNT 1 and MISS_CNT 1 and NROSIZE > 1) or
(SINGLE_RELATED = 1 and TOTAL_CU ITERATION) or
(Any valid value in SINGLE_OTHER and TOTAL_CU ITERATION) or
(MULTI_RELATED = 1, D, or R and TOTAL_CU ITERATION) or
(Any valid value in MULTI_OTHER and TOTAL_CU ITERATION)
|
|||||||
Line No. |
Name |
Relationship |
Age |
Sex |
Away at college |
HH member |
CU number |
[Fill: LNO] |
[Fill: FNAME LNAME] |
[Fil: REL] |
[Fill: AGE] |
[Fill: SEX] |
[Fill: AWAY_COL] |
[Fill: HH_MEM] |
[Fill: PERCUNUM] |
• • |
• • |
• • |
• • |
• • |
• • |
• • |
• • |
Our records indicate that Read above names that are highlighted formed a CU on [Fill: INTDATE].
Press 1 to continue. |
|||||||
1. Continue |
|||||||
• |
Name |
Description |
Value |
Skip |
|
CU_LISTING |
CU listing |
1 |
[If COUNT = 1, goto SINGLE_RELATED] [If COUNT > 1, goto MUTLI_RELATED] |
SPECIAL INSTRUCTIONS
1. Display the household roster for household members (HH_MEM = 1). Gray all household members with PERCUNUM ITERATION. Fill REL, SEX, AWAY_COL, and HH_MEM with the descriptions from Attachment G.
2. Calculate count of the number of household members listed in this CU, that is, the number of persons with HH_MEM=1 and PERCUNUM=ITERATION. Do not display. Store this value in the variable COUNT.
----------------------------------------------------------------------------------------------------------------------
NEW SCREEN
Universe - CU_LISTING = 1 and COUNT = 1
|
|||||||
Line No. |
Name |
Relationship |
Age |
Sex |
Away at college |
HH member |
CU number |
[Fill: MEMBNO] |
[Fill: FNAME LNAME] |
[Fil: REL] |
[Fill: AGE] |
[Fill: SEX] |
[Fill: AWAY_COL] |
[Fill: HH_MEM] |
[Fill: PERCUNUM] |
• |
• |
• |
• |
• |
• |
• |
• |
Is Read above name that is highlighted related by blood, marriage, adoption, or other legal arrangement to any other household member?
|
|||||||
1. Yes 2. No |
|||||||
• |
Name |
Description |
Value |
Skip |
|
SINGLE_RELATED |
One person CU - related |
1 |
[If TOTAL_CU ITERATION goto CU_LISTING [goto TENURE_1] |
|
|
|
2 |
[goto SINGLE_HOUSING] |
|
|
|
Ctrl-D = Don’t know |
[goto SINGLE_HOUSING] |
|
|
|
Ctrl-R = Refusal |
[goto SINGLE_HOUSING] |
SPECIAL INSTRUCTIONS
1. Display the household roster for household members (HH_MEM = 1). Gray all household members with PERCUNUM ITERATION. Fill REL, SEX, AWAY_COL, and HH_MEM with the descriptions from Attachment G.
2. If SINGLE_RELATED = 1, set INCT_CU = INCT_CU + 1 and store code 12 in element [12] of DISCREPANCY array.
3. If SINGLE_RELATED = 1, set ITERATION = ITERATION + 1.
4. If SINGLE_RELATED = 2, ‘Don’t know,’ or ‘Refused,’ set DEPENDENT = 0.
-----------------------------------------------------------------------------------------------------------------------
NEW SCREEN
Universe - SINGLE_RELATED = 2, D, or R
|
|||||||
Line No. |
Name |
Relationship |
Age |
Sex |
Away at college |
HH member |
CU number |
[Fill: MEMBNO] |
[Fill: FNAME LNAME] |
[Fil: REL] |
[Fill: AGE] |
[Fill: SEX] |
[Fill: AWAY_COL] |
[Fill: HH_MEM] |
[Fill: PERCUNUM] |
• |
• |
• |
• |
• |
• |
• |
• |
Does any other household member pay for all or part of Read above name that is highlighted housing expenses?
|
|||||||
1. Yes 2. No |
|||||||
• |
Name |
Description |
Value |
Skip |
|
SINGLE_HOUSING |
One person CU - housing expenses |
1 |
[goto SINGLE_FOOD] |
|
|
|
2 |
[goto SINGLE_FOOD] |
|
|
|
Ctrl-D = Don’t know |
[goto SINGLE_FOOD] |
|
|
|
Ctrl-R = Refusal |
[goto SINGLE_FOOD] |
SPECIAL INSTRUCTIONS
1. Display the household roster for household members (HH_MEM = 1). Gray all household members with PERCUNUM ITERATION. Fill REL, SEX, AWAY_COL, and HH_MEM with the descriptions from Attachment G.]
2. If SINGLE_RELATED = 1, set DEPENDENT = DEPENDENT + 1.
-----------------------------------------------------------------------------------------------------------------------
NEW SCREEN
Universe - Any valid value in SINGLE_HOUSING
|
|||||||
Line No. |
Name |
Relationship |
Age |
Sex |
Away at college |
HH member |
CU number |
[Fill: MEMBNO] |
[Fill: FNAME LNAME] |
[Fil: REL] |
[Fill: AGE] |
[Fill: SEX] |
[Fill: AWAY_COL] |
[Fill: HH_MEM] |
[Fill: PERCUNUM] |
• |
• |
• |
• |
• |
• |
• |
• |
Does any other household member pay for all or part of Read above name that is highlighted food expenses?
|
|||||||
1. Yes 2. No |
|||||||
• |
Name |
Description |
Value |
Skip |
|
SINGLE_FOOD |
One person CU - food expenses |
1 |
[goto SINGLE_OTHER] |
|
|
|
2 |
[goto SINGLE_OTHER] |
|
|
|
Ctrl-D = Don’t know |
[goto SINGLE_OTHER] |
|
|
|
Ctrl-R = Refusal |
[goto SINGLE_OTHER] |
SPECIAL INSTRUCTIONS
1. Display the household roster for household members (HH_MEM = 1). Gray all household members with PERCUNUM ITERATION. Fill REL, SEX, AWAY_COL, and HH_MEM with the descriptions from Attachment G.
2. If SINGLE_FOOD = 1, set DEPENDENT = DEPENDENT + 1.
-----------------------------------------------------------------------------------------------------------------------
NEW SCREEN
Universe - Any valid entry in SINGLE_FOOD
|
|||||||
Line No. |
Name |
Relationship |
Age |
Sex |
Away at college |
HH member |
CU number |
[Fill: MEMBNO] |
[Fill: FNAME LNAME] |
[Fil: REL] |
[Fill: AGE] |
[Fill: SEX] |
[Fill: AWAY_COL] |
[Fill: HH_MEM] |
[Fill: PERCUNUM] |
• |
• |
• |
• |
• |
• |
• |
• |
Does any other household member pay for all or part of Read above name that is highlighted other living expenses, such as clothing, transportation?
|
|||||||
1. Yes 2. No |
|||||||
• |
Name |
Description |
Value |
Skip |
|
SINGLE_OTHER |
One person CU - other expenses |
1 |
[If TOTAL_CU ITERATION, goto CU_LISTING] [goto TENURE_1] |
|
|
|
2 |
[If TOTAL_CU ITERATION, goto CU_LISTING] [goto TENURE_1] |
|
|
|
Ctrl-D = Don’t know |
[If TOTAL_CU ITERATION, goto CU_LISTING] [goto TENURE_1] |
|
|
|
Ctrl-R = Refusal |
[If TOTAL_CU ITERATION, goto CU_LISTING] [goto TENURE_1] |
SPECIAL INSTRUCTIONS
1. Display the household roster for household members (HH_MEM = 1). Gray all household members with PERCUNUM ITERATION. Fill REL, SEX, AWAY_COL, and HH_MEM with the descriptions from Attachment G.
2. If SINGLE_OTHER = 1, set DEPENDENT = DEPENDENT + 1.
3. If DEPENDENT 2, set INCT_CU = INCT_CU + 1 and store code 12 in element [12] of DISCREPANCY array.
4. Set ITERATION = ITERATION + 1.
-----------------------------------------------------------------------------------------------------------------------
NEW SCREEN
Universe - CU_LISTING = 1 and COUNT > 1
|
|||||||
Line No. |
Name |
Relationship |
Age |
Sex |
Away at college |
HH member |
CU number |
[Fill: MEMBNO] |
[Fill: FNAME LNAME] |
[Fil: REL] |
[Fill: AGE] |
[Fill: SEX] |
[Fill: AWAY_COL] |
[Fill: HH_MEM] |
[Fill: PERCUNUM] |
• • |
• • |
• • |
• • |
• • |
• • |
• • |
•
|
Are Read above names that are highlighted all related by blood, marriage, adoption, or other legal arrangement? |
|||||||
1. Yes 2. No |
|||||||
• |
Name |
Description |
Value |
Skip |
|
MULTI_RELATED |
Multi person CU - related |
1 |
[If TOTAL_CU ITERATION, goto CU_LISTING [goto TENURE_1] |
|
|
|
2 |
[goto MULTI_HOUSING] |
|
|
|
Ctrl-D = Don’t know |
[If TOTAL_CU ITERATION, goto CU_LISTING [goto TENURE_1] |
|
|
|
Ctrl-R = Refusal |
[If TOTAL_CU ITERATION, goto CU_LISTING [goto TENURE_1] |
SPECIAL INSTRUCTIONS
1. Display the household roster for household members (HH_MEM = 1). Gray all household members with PERCUNUM ITERATION. Fill REL, SEX, AWAY_COL, and HH_MEM with the descriptions from Attachment G.
2. If MULTI_RELATED = 1, ‘Don’t know,’ or ‘Refusal,’ set ITERATION =
ITERATION + 1.
3. If MULTI_RELATED = 2, set INDEPENDENT = 0.
-----------------------------------------------------------------------------------------------------------------------
NEW SCREEN
Universe - MULTI_RELATED = 2
|
|||||||
Line No. |
Name |
Relationship |
Age |
Sex |
Away at college |
HH member |
CU number |
[Fill: MEMBNO] |
[Fill: FNAME LNAME] |
[Fil: REL] |
[Fill: AGE] |
[Fill: SEX] |
[Fill: AWAY_COL] |
[Fill: HH_MEM] |
[Fill: PERCUNUM] |
• • |
• • |
• • |
• • |
• • |
• • |
• • |
• • |
Does this CU, Read above names that are highlighted , include a person or a group of persons who are independent of the other persons in this CU for payment of housing expenses?
By independent I mean that this person or group of persons neither receives money from the other CU members for housing expenses nor pays for any of the other CU members’ housing expenses.
|
|||||||
1. Yes 2. No |
|||||||
• |
Name |
Description |
Value |
Skip |
|
MULTI_HOUSING |
Multi person CU - housing expenses |
1 |
[goto MUTLI_FOOD] |
|
|
|
2 |
[goto MUTLI_FOOD] |
|
|
|
Ctrl-D = Don’t know |
[goto MUTLI_FOOD] |
|
|
|
Ctrl-R = Refusal |
[goto MUTLI_FOOD] |
SPECIAL INSTRUCTIONS
1. Display the household roster for household members (HH_MEM = 1). Gray all household members with PERCUNUM ITERATION. Fill REL, SEX, AWAY_COL, and HH_MEM with the descriptions from Attachment G.]
2. If MULTI_HOUSING = 1, set INDEPENDENT = INDEPENDENT + 1.
-----------------------------------------------------------------------------------------------------------------------
NEW SCREEN
Universe - Any valid value in MULTI_HOUSING
|
|||||||
Line No. |
Name |
Relationship |
Age |
Sex |
Away at college |
HH member |
CU number |
[Fill: MEMBNO] |
[Fill: FNAME LNAME] |
[Fil: REL] |
[Fill: AGE] |
[Fill: SEX] |
[Fill: AWAY_COL] |
[Fill: HH_MEM] |
[Fill: PERCUNUM] |
• • |
• • |
• • |
• • |
• • |
• • |
• • |
• • |
Does this CU, Read above names that are highlighted , include a person or a group of persons who are independent of the other persons in this CU for payment of food expenses?
By independent I mean that this person or group of persons neither receives money from the other CU members for food expenses nor pays for any of the other CU members’ food expenses.
|
|||||||
1. Yes 2. No |
|||||||
• |
Name |
Description |
Value |
Skip |
|
MULTI_FOOD |
Multi person CU - food expenses |
1 |
[goto MUTLI_OTHER] |
|
|
|
2 |
[goto MUTLI_OTHER] |
|
|
|
Ctrl-D = Don’t know |
[goto MUTLI_OTHER] |
|
|
|
Ctrl-R = Refusal |
[goto MUTLI_OTHER] |
SPECIAL INSTRUSTIONS
1. Display the household roster for household members (HH_MEM = 1). Gray all household members with PERCUNUM ITERATION. Fill REL, SEX, AWAY_COL, and HH_MEM with the descriptions from Attachment G.
2. If MULTI_FOOD = 1, set INDEPENDENT = INDEPENDENT + 1.
-----------------------------------------------------------------------------------------------------------------------
NEW SCREEN
Universe - Any valid value in MULTI_FOOD
|
|||||||
Line No. |
Name |
Relationship |
Age |
Sex |
Away at college |
HH member |
CU number |
[Fill: MEMBNO] |
[Fill: FNAME LNAME] |
[Fil: REL] |
[Fill: AGE] |
[Fill: SEX] |
[Fill: AWAY_COL] |
[Fill: HH_MEM] |
[Fill: PERCUNUM] |
• • |
• • |
• • |
• • |
• • |
• • |
• • |
• • |
Does this CU, Read above names that are highlighted , include a person or a group of persons who are independent of the other persons in this CU for payment of other living expenses, such as clothing, transportation?
By independent I mean that this person or group of persons neither receives money from the other CU members for other living expenses nor pays for any of the other CU members’ other living expenses.
|
|||||||
1. Yes 2. No |
|||||||
• |
Name |
Description |
Value |
Skip |
|
MULTI_OTHER |
Multi person CU - other expenses |
1 |
[If TOTAL_CU ITERATION, goto CU_LISTING [goto TENURE_1] |
|
|
|
2 |
[If TOTAL_CU ITERATION, goto CU_LISTING [goto TENURE_1] |
|
|
|
Ctrl-D = Don’t know |
[If TOTAL_CU ITERATION, goto CU_LISTING [goto TENURE_1] |
|
|
|
Ctrl-R = Refusal |
[If TOTAL_CU ITERATION, goto CU_LISTING [goto TENURE_1] |
SPECIAL INSTRUCTIONS
1. Display the household roster for household members (HH_MEM = 1). Gray all household members with PERCUNUM ITERATION. Fill REL, SEX, AWAY_COL, and HH_MEM with the descriptions from Attachment G.
2. MULTI_OTHER = 1, set INDEPENDENT = INDEPENDENT + 1.
3. If INDEPENDENT 2, set INCT_CU = INCT_CU + 1 and store code 12 in element [12] of DISCREPANCY array.
3. Set ITERATION = ITERATION + 1.
-----------------------------------------------------------------------------------------------------------------------
NEW SCREEN
UNIVERSE - (SURVEY_1 = 1 and (INCT_CNT 1 or MISS_CNT 1 or NROSIZE = 1)) or
(SINGLE_RELATED = 1 and TOTAL_CU < ITERATION) or
(Any valid value in SINGLE_OTHER and TOTAL_CU < ITERATION) or
(MULTI_RELATED = 1, D, or R and TOTAL_CU < ITERATION) or
(Any valid value in MULTI_OTHER and TOTAL_CU < ITERATION)
Are these living quarters presently used as student housing by a college or university?
|
1. Yes 2. No |
• |
Name |
Description |
Value |
Skip |
|
TENURE_1 |
Tenure - student housing |
1 |
[If PERCUNUM = 1 for LNO = RIRESP and (LENGHT_H = D or LENGHT_M = <0 - 90>) {and SURVEY_SET = 1} go to {SURVEY_2 SURVEY_1_1}] {[If PERCUNUM = 1 for LNO = RIRESP and (LENGHT_H = D or LENGHT_M = <0 - 90>) and SURVEY_SET = 2 go to SURVEY_2_1] [If PERCUNUM = 1 for LNO = RIRESP and (LENGHT_H = D or LENGHT_M = <0 - 90>) and SURVEY_SET = 3 go to SURVEY_3_1]} [goto THANK_YOU] |
|
|
|
2 |
[If PERCUNUM = 1 for LNO = RIRESP go to TENURE_2] [goto THANK_YOU] |
|
|
|
Ctrl-D = Don’t know |
[If PERCUNUM = 1 for LNO = RIRESP go to TENURE_2] [goto THANK_YOU] |
|
|
|
Ctrl-R = Refused |
[If PERCUNUM = 1 for LNO = RIRESP go to TENURE_2] [goto THANK_YOU] |
-------------------------------------------------------------------------------------------------------------------
NEW SCREEN
UNIVERSE - ((TENURE_1 = 2, D, or R) and PERCUNUM = 1 for LNO = RIRESP)
Do you own this home?
|
1. Yes 2. No |
• |
Name |
Description |
Value |
Skip |
|
TENURE_2 |
Tenure - owned or bought |
1 |
[If (LENGHT_H = D or LENGHT_M = <0 - 90>) {and SURVEY_SET = 1} go to {SURVEY_2 SURVEY_1_1}] {[If (LENGHT_H = D or LENGHT_M = <0 - 90>) and SURVEY_SET = 2 go to SURVEY_2_1] [If (LENGHT_H = D or LENGHT_M = <0 - 90>) and SURVEY_SET = 3 go to SURVEY_3_1]} [goto THANK_YOU] |
|
|
|
2 |
[goto TENURE_3] |
|
|
|
Ctrl-D = Don’t know |
[goto TENURE_3] |
|
|
|
Ctrl-R = Refused |
[goto TENURE_3] |
-------------------------------------------------------------------------------------------------------------------
NEW SCREEN
UNIVERSE - TENURE_2 = 2, D, or R
Do you or any member of your CU pay rent for these living quarters? |
1. Yes 2. No |
• |
Name |
Description |
Value |
Skip |
|
TENURE_3 |
Tenure - pay rent |
1 |
[goto TENURE_4] |
|
|
|
2 |
[goto TENURE_4] |
|
|
|
Ctrl-D = Don’t know |
[goto TENURE_4] |
|
|
|
Ctrl-R = Refused |
[goto TENURE_4] |
-------------------------------------------------------------------------------------------------------------------
NEW SCREEN
UNIVERSE - TENURE_3 = 1, 2, D or R
Did you or any member of your CU receive any reduced or free rent for this unit as a form of pay since the 1st of the [Fill: REF_MONTH]?
|
1. Yes 2. No |
• |
Name |
Description |
Value |
Skip |
|
TENURE_4 |
Tenure - reduced or free rent |
1 |
[If (LENGHT_H = D or LENGHT_M) = <0 - 90>) {and SURVEY_SET = 1 } go to {SURVEY_2 SURVEY_1_1}] {[If (LENGHT_H = D or LENGHT_M) = <0 - 90>) and SURVEY_SET = 2 go to SURVEY_2_1] [If (LENGHT_H = D or LENGHT_M) = <0 - 90>) and SURVEY_SET = 3 go to SURVEY_3_1]} [goto THANK_YOU] |
|
|
|
2 |
[If (LENGHT_H = D or LENGHT_M) = <0 - 90>) {and SURVEY_SET = 1 } go to {SURVEY_2 SURVEY_1_1}] {[If (LENGHT_H = D or LENGHT_M) = <0 - 90>) and SURVEY_SET = 2 go to SURVEY_2_1] [If (LENGHT_H = D or LENGHT_M) = <0 - 90>) and SURVEY_SET = 3 go to SURVEY_3_1]} [goto THANK_YOU] |
|
|
|
Ctrl-D = Don’t know |
[If (LENGHT_H = D or LENGHT_M) = <0 - 90>) {and SURVEY_SET = 1 } go to {SURVEY_2 SURVEY_1_1}] {[If (LENGHT_H = D or LENGHT_M) = <0 - 90>) and SURVEY_SET = 2 go to SURVEY_2_1] [If (LENGHT_H = D or LENGHT_M) = <0 - 90>) and SURVEY_SET = 3 go to SURVEY_3_1]} [goto THANK_YOU] |
|
|
|
Ctrl-R = Refused |
[If (LENGHT_H = D or LENGHT_M) = <0 - 90>) {and SURVEY_SET = 1 } go to {SURVEY_2 SURVEY_1_1}] {[If (LENGHT_H = D or LENGHT_M) = <0 - 90>) and SURVEY_SET = 2 go to SURVEY_2_1] [If (LENGHT_H = D or LENGHT_M) = <0 - 90>) and SURVEY_SET = 3 go to SURVEY_3_1]} [goto THANK_YOU] |
-------------------------------------------------------------------------------------------------------------------
NEW SCREEN
UNIVERSE - (TENURE_1 = 1 and PERCUNUM = 1 for LNO = RIRESP and (LENGHT_H = D or LENGHT_M = <0 - 90>)) or
(TENURE_2 = 1 and (LENGHT_H = D or LENGHT_M = <0 - 90>)) or
(Any valid value in TENURE_4 and (LENGHT_H = D or LENGHT_M = <0 - 90>))
Did the interviewer ask questions about medical payments paid by you or any member of your CU since the 1st of [Fill: REF_MONTH ]?
By payments I mean any expenses paid by you or any member of your CU directly to a medical provider by cash, check, or credit card for a medical service or item.
|
1. Yes 2. No |
• |
Name |
Description |
Value |
Skip |
|
SURVEY_2 |
CE survey question - medical payments |
1 |
[goto SURVEY_3] |
|
|
|
2 |
[goto SURVEY_3] |
|
|
|
Ctrl-D = Don’t know |
[goto SURVEY_3] |
SPECIAL INSTRUCTIONS
If SURVEY_2 = 2, store code 8 in element [8] of DISCREPANCY array.
-------------------------------------------------------------------------------------------------------------------
NEW SCREEN
UNIVERSE - Any valid value in SURVEY_2
Did the interviewer ask questions about medical reimbursements made to you or any member of your CU since the 1st of [Fill: REF_MONTH]?
By reimbursements I mean money received by you or any member of your CU from an insurance company, medical care provider, or non CU member, for medical expenses which you previously paid or will pay.
|
1. Yes 2. No |
• |
Name |
Description |
Value |
Skip |
|
SURVEY_3 |
CE survey question - medical reimbursements |
1 |
[goto SURVEY_4] |
|
|
|
2 |
[goto SURVEY_4] |
|
|
|
Ctrl-D = Don’t know |
[goto SURVEY_4] |
SPECIAL INSTRUCTIONS
If SURVEY_2 = 2, store code 8 in element [8] of DISCREPANCY array.
-------------------------------------------------------------------------------------------------------------------
NEW SCREEN
UNIVERSE - Any valid value in SURVEY_3
Did the interviewer ask questions about trips and vacations taken by you or any member of your CU since the 1st of [Fill: REF_MONTH]?
These trips or vacations include overnight or longer trips to visit relatives or friends, for business, or for recreation.
|
1. Yes 2. No |
• |
Name |
Description |
Value |
Skip |
|
SURVEY_4 |
CE survey question - trips and vacations |
1 |
[If INTNMBR = 1 goto SURVEY_5] [If INTNMBR = 2 or 5 goto SURVEY_6] [goto THANK_YOU] |
|
|
|
2 |
[If INTNMBR = 1 goto SURVEY_5] [If INTNMBR = 2 or 5 goto SURVEY_6] [goto THANK_YOU] |
|
|
|
Ctrl-D = Don’t know |
[If INTNMBR = 1 goto SURVEY_5] [If INTNMBR = 2 or 5 goto SURVEY_6] [goto THANK_YOU] |
SPECIAL INSTRUCTIONS
If SURVEY_2 = 2, store code 8 in element [8] of DISCREPANCY array.
-------------------------------------------------------------------------------------------------------------------
{NEW SCREEN
UNIVERSE - (TENURE_1 = 1 and PERCUNUM = 1 for LNO = RIRESP and (LENGHT_H = D or LENGHT_M = <0 - 90>) and SURVEY_SET = 1) or
(TENURE_2 = 1 and (LENGHT_H = D or LENGHT_M = <0 - 90>) and SURVEY_SET = 1) or
(Any valid value in TENURE_4 and (LENGHT_H = D or LENGHT_M = <0 - 90>) and SURVEY_SET = 1)
Did the interviewer ask questions about rented or owned living quarters and payments towards these living quarters?
These include questions about any rental payments, mortgages, or home equity loans paid or obtained by you or any member of your CU since the 1st of [FILL: REF_MONTH].
|
1. Yes 2. No |
• |
Name |
Description |
Value |
Skip |
|
SURVEY_1_1 |
CE survey question - rental or housing expenses |
1 |
[goto SURVEY_1_2] |
|
|
|
2 |
[goto SURVEY_1_2] |
|
|
|
Ctrl-D = Don’t know |
[goto SURVEY_1_2] |
SPECIAL INSTRUCTIONS
If SURVEY_1_1 = 2, store code 8 in element [8] of DISCREPANCY array.}
-------------------------------------------------------------------------------------------------------------------
{NEW SCREEN
UNIVERSE - Any valid value in SURVEY_1_1
Did the interviewer ask questions about expenses for home furnishings and related household items?
These include questions about purchases of any furniture, infant equipment, outdoor equipment, decorative items, dishes, flatware, glassware, cookware, linens, or floor and window coverings made by you or any member of your CU since the 1st of [FILL: REF_MONTH] for your CU or for someone outside of your CU.
|
1. Yes 2. No |
• |
Name |
Description |
Value |
Skip |
|
SURVEY_1_2 |
CE survey question - home furnishings |
1 |
[goto SURVEY_1_3] |
|
|
|
2 |
[goto SURVEY_1_3] |
|
|
|
Ctrl-D = Don’t know |
[goto SURVEY_1_3] |
SPECIAL INSTRUCTIONS
If SURVEY_1_2 = 2, store code 8 in element [8] of DISCREPANCY array.}
-------------------------------------------------------------------------------------------------------------------
{NEW SCREEN
UNIVERSE - Any valid value in SURVEY_1_2
Did the interviewer ask questions about non-health insurance policies?
These include questions about purchases of or payments for any life insurance, homeowner’s or renter’s insurance, or automobile or other vehicle insurance made by you or any member of your CE since the 1st of [FILL: REF_MONTH].
|
1. Yes 2. No |
• |
Name |
Description |
Value |
Skip |
|
SURVEY_1_3 |
CE survey question - insurance |
1 |
[If INTNMBR = 1 goto SURVEY_5] [If INTNMBR = 2 or 5 goto SURVEY_6] [goto THANK_YOU] |
|
|
|
2 |
[If INTNMBR = 1 goto SURVEY_5] [If INTNMBR = 2 or 5 goto SURVEY_6] [goto THANK_YOU] |
|
|
|
Ctrl-D = Don’t know |
[If INTNMBR = 1 goto SURVEY_5] [If INTNMBR = 2 or 5 goto SURVEY_6] [goto THANK_YOU] |
SPECIAL INSTRUCTIONS
If SURVEY_1_3 = 2, store code 8 in element [8] of DISCREPANCY array.}
-------------------------------------------------------------------------------------------------------------------
{NEW SCREEN
UNIVERSE - (TENURE_1 = 1 and PERCUNUM = 1 for LNO = RIRESP and (LENGHT_H = D or LENGHT_M = <0 - 90>) and SURVEY_SET = 2) or
(TENURE_2 = 1 and (LENGHT_H = D or LENGHT_M = <0 - 90>) and SURVEY_SET = 2) or
(Any valid value in TENURE_4 and (LENGHT_H = D or LENGHT_M = <0 - 90>) and SURVEY_SET = 2)
Did the interviewer ask questions about telephone bills?
These include questions about any bills received and/or paid by you or any member of your CU since the 1st of [FILL: REF_MONTH] for telephone or pager services..
|
1. Yes 2. No |
• |
Name |
Description |
Value |
Skip |
|
SURVEY_2_1 |
CE survey question - telephone expenses |
1 |
[goto SURVEY_2_2] |
|
|
|
2 |
[goto SURVEY_2_2] |
|
|
|
Ctrl-D = Don’t know |
[goto SURVEY_2_2] |
SPECIAL INSTRUCTIONS
If SURVEY_2_1 = 2, store code 8 in element [8] of DISCREPANCY array.}
-------------------------------------------------------------------------------------------------------------------
{NEW SCREEN
UNIVERSE - Any valid value in SURVEY_2_1
Did the interviewer ask questions about clothing purchases?
These include questions about purchases of any infant, child, or adult clothes, outerwear, undergarments, nightwear, sportswear, or footwear made by you or any member of your CU since the 1st of [FILL: REF_MONTH] for members of your CU or for someone outside of your CU.
|
1. Yes 2. No |
• |
Name |
Description |
Value |
Skip |
|
SURVEY_2_2 |
CE survey question - clothing |
1 |
[goto SURVEY_2_3] |
|
|
|
2 |
[goto SURVEY_2_3] |
|
|
|
Ctrl-D = Don’t know |
[goto SURVEY_2_3] |
SPECIAL INSTRUCTIONS
If SURVEY_2_2 = 2, store code 8 in element [8] of DISCREPANCY array.}
-------------------------------------------------------------------------------------------------------------------
{NEW SCREEN
UNIVERSE - Any valid value in SURVEY_2_2
Did the interviewer ask questions about expenses for subscriptions, memberships, books, and entertainment?
These include questions about subscriptions for newspapers or magazines, memberships to clubs or organizations, fees for participating in sports, or admissions to spectator sports, performances, or entertainment activities paid by you or any member of your CE since the 1st of [FILL: REF_MONTH].
|
1. Yes 2. No |
• |
Name |
Description |
Value |
Skip |
|
SURVEY_2_3 |
CE survey question - subscriptions, memberships, books and entertainment |
1 |
[If INTNMBR = 1 goto SURVEY_5] [If INTNMBR = 2 or 5 goto SURVEY_6] [goto THANK_YOU] |
|
|
|
2 |
[If INTNMBR = 1 goto SURVEY_5] [If INTNMBR = 2 or 5 goto SURVEY_6] [goto THANK_YOU] |
|
|
|
Ctrl-D = Don’t know |
[If INTNMBR = 1 goto SURVEY_5] [If INTNMBR = 2 or 5 goto SURVEY_6] [goto THANK_YOU] |
SPECIAL INSTRUCTIONS
If SURVEY_2_3 = 2, store code 8 in element [8] of DISCREPANCY array.}
-------------------------------------------------------------------------------------------------------------------
{NEW SCREEN
UNIVERSE - (TENURE_1 = 1 and PERCUNUM = 1 for LNO = RIRESP and (LENGHT_H = D or LENGHT_M = <0 - 90>) and SURVEY_SET = 3) or
(TENURE_2 = 1 and (LENGHT_H = D or LENGHT_M = <0 - 90>) and SURVEY_SET = 3) or
(Any valid value in TENURE_4 and (LENGHT_H = D or LENGHT_M = <0 - 90>) and SURVEY_SET = 3)
Did the interviewer ask questions about utility bills?
These include questions about any bills received and/or paid by you or any member of your CU since the 1st of [FILL: REF_MONTH] for any utilities, fuels or services such as electricity, natural gas, fuel oil, water, sewerage maintenance or trash collection.
|
1. Yes 2. No |
• |
Name |
Description |
Value |
Skip |
|
SURVEY_3_1 |
CE survey question - utilities |
1 |
[goto SURVEY_3_2] |
|
|
|
2 |
[goto SURVEY_3_2] |
|
|
|
Ctrl-D = Don’t know |
[goto SURVEY_3_2] |
SPECIAL INSTRUCTIONS
If SURVEY_3_1 = 2, store code 8 in element [8] of DISCREPANCY array.}
-------------------------------------------------------------------------------------------------------------------
{NEW SCREEN
UNIVERSE - Any valid value in SURVEY_3_1
Did the interviewer ask questions about owned vehicles and expenses for vehicle services, parts, and equipment?
These include questions about any vehicles purchased or acquired by you or any member of your CU since the 1st of [FILL: REF_MONTH], as well as any expenses for vehicle maintenance or repair during this time period.
|
1. Yes 2. No |
• |
Name |
Description |
Value |
Skip |
|
SURVEY_3_2 |
CE survey question - vehicles and vehicle and maintenance |
1 |
[goto SURVEY_3_3] |
|
|
|
2 |
[goto SURVEY_3_3] |
|
|
|
Ctrl-D = Don’t know |
[goto SURVEY_3_3] |
SPECIAL INSTRUCTIONS
If SURVEY_3_2 = 2, store code 8 in element [8] of DISCREPANCY array.}
-------------------------------------------------------------------------------------------------------------------
{NEW SCREEN
UNIVERSE - Any valid value in SURVEY_3_2
Did the interviewer ask questions about trips and vacations?
These include questions about trips to visit relatives or friends, for business or for recreations, taken by you or any member of your CE since the 1st of [FILL: REF_MONTH].
|
1. Yes 2. No |
• |
Name |
Description |
Value |
Skip |
|
SURVEY_3_3 |
CE survey question - trips |
1 |
[If INTNMBR = 1 goto SURVEY_5] [If INTNMBR = 2 or 5 goto SURVEY_6] [goto THANK_YOU] |
|
|
|
2 |
[If INTNMBR = 1 goto SURVEY_5] [If INTNMBR = 2 or 5 goto SURVEY_6] [goto THANK_YOU] |
|
|
|
Ctrl-D = Don’t know |
[If INTNMBR = 1 goto SURVEY_5] [If INTNMBR = 2 or 5 goto SURVEY_6] [goto THANK_YOU] |
SPECIAL INSTRUCTIONS
If SURVEY_3_3 = 2, store code 8 in element [8] of DISCREPANCY array.}
-------------------------------------------------------------------------------------------------------------------
{NEW SCREEN
UNIVERSE - (Any valid values in {SURVEY_4 SURVEY_1_3} and INTNMBR = 1) {or
(Any valid values in SURVEY_2_3 and INTNMBR = 1) or
(Any valid values in SURVEY_3_3 and INTNMBR = 1)}
Did the interviewer read a list of income categories and ask questions about which category represented the total combined income of this CU for the past 12 months?
Income includes money from jobs, net income from business, farm or rent, pensions, dividends, interest, social security payments, and any other money income received by all CU members 14 years of age or older.
|
1. Yes 2. No |
• |
Name |
Description |
Value |
Skip |
|
SURVEY_5 |
CE survey question - income |
1 |
[goto THANK_YOU] |
|
|
|
2 |
[goto THANK_YOU] |
|
|
|
Ctrl-D = Don’t know |
[goto THANK_YOU] |
SPECIAL INSTRUCTIONS
If SURVEY_5 = 2, store code 8 in element [8] of DISCREPANCY array.}
-------------------------------------------------------------------------------------------------------------------
NEW SCREEN
UNIVERSE - (Any valid value in {SURVEY_4 SURVEY_1_3} and INTNMBR = 2 or 5) {or
(Any valid values in SURVEY_2_3 and INTNMBR = 2 or 5) or
(Any valid values in SURVEY_3_3 and INTNMBR = 2 or 5)}
Did the interviewer ask questions about work done during the last 12 months by you or any member of your CU?
Types of questions asked include number of weeks worked, number of hours per week usually worked, and job category.
|
1. Yes 2. No |
• |
Name |
Description |
Value |
Skip |
|
SURVEY_6 |
CE survey question - work |
1 |
[goto THANK_YOU] |
|
|
|
2 |
[goto THANK_YOU] |
|
|
|
Ctrl-D = Don’t know |
[goto THANK_YOU] |
SPECIAL INSTRUCTIONS
If SURVEY_6 = 2, store code 8 in element [8] of DISCREPANCY array.
----------------------------------------------------------------------------------------------------------------------
XV. Back Specifications
The screens for the back of the instrument appear in this section. A list of the reinterview disposition (RI_DISP), outcome (OUTCOME) and action (ACTION) codes appear in Attachment F, CEQ Reinterview Disposition, Outcome, and Action Codes. The reinterview instrument sets the reinterview disposition and outcome codes. Case Management assigns the action code based on the reinterview outcome code.
UNIVERSE - (PROX_C = 2 and (HELLO_PC = 4 or HELLO_TC = 3 or 5)) or
(HELLO_TC = 3 or 5 and RPROXY_A = 0) or
(STATUS = 1 or D) or
(Any valid value in STAT_PROBE) or
(Any valid value in STAT_PROB2) or
(PROX_N = 2 and (HELLO_PN = 4 or HELLO_TN = 4) or
(HELLO_PC = 4 and RPROXY_A = 0) or
(ROSTER_3 = 2 or D or R and LENGTH_H empty and LENGTH_M empty)) or
(Any valid value in ROSTER_4 and LENGTH_H empty and LENGTH_M empty) or
(STAT_VER = 2) or
(SPEAKTO2 = 2) or
(VACANT2 = 1) or
(TENURE_1 = 1 and (PERCUNUM > 1 or blank for LNO = RIRESP or
(LENGTH_H empty and LENGTH_M empty))) or
(TENURE_1 = 2 and PERCUNUM > 1 or blank for LNO = RIRESP) or
(TENURE_2 = 1 and LENGTH_H empty and LENGTH_M empty) or
(Any valid value in TENURE_4 and LENGTH_H empty and LENGTH_M empty) or
(Any valid value in {SURVEY_4 SURVEY_1_3} and INTNMBR = 1, 3, or 4) or
{(Any valid value in SURVEY_2_3 and INTNMBR = 1, 3, or 4) or
(Any valid value in SURVEY_3_3} and INTNMBR = 1, 3, or 4) or}
{(Any valid value in SURVEY_5) or }
(Any valid value in SURVEY_6)
Thank you for your cooperation. You've been very helpful.
Enter 1 to continue.
|
1. Continue |
• |
Name |
Description |
Value |
Skip |
|
THANK_YOU |
Thank You |
1 |
[If (HELLO_TC = 5 and RPROXY_A = 0) or (HELLO_PN = 4 and PROX_N = 2) or (HELLO_PC = 4 and RPROXY_A = 0) or (HELLO_TN = 4 and PROX_N = 2) goto STATUS_RI] [goto RI_OUTCM] |
-------------------------------------------------------------------------------------------------------------------
UNIVERSE - (VERTYPEA = 2) or
(RI_OUTCM = 1 and ORIOUT_RSLT = INT, B1, B2, C1, C2 or VINT and
BYOBS = 0, blank or 2) or
(RI_OUTCM = 2 and ORIOUT_RSLT = INT) or
(NONINT = 4) or
(TYPEA = <1-9>) or
(TYPEB = <1-9>) or
(TYPEB_ALT = <1-11>) or
(TYPEC = <1-7>) or
(MISC_B = <1-4>) or
(MISC_C = <1-4>) or
(MISC_VINT = 1 or 2) or
(MISC_BVINT = <1-5>) or
(MISC_CVINT = <1-5>) or
[Fill: “Your reinterview indicates the following discrepancies:” code and description of each code listed in DISCREPANCY array / “Your reinterview did not indicate any discrepancies.”]
|
1. Yes 2. No 3. Unable to determine |
• |
Name |
Description |
Value |
Skip |
|
FALSIF |
Falsification suspected? |
1 |
[If RI_OUTCM=3 goto RINOTES_PRE] [If RI_OUTCM=2 goto RINOTES_PRE] [If RI_OUTCM=1 and all elements in DISCREPANCY array blank goto NO_DISCREP] [If RI_OUTCM=1 and only one element in DISCREPANCY array 1 goto RINOTES_PRE] [If RI_OUTCM=1 and two or more elements in DISCREPANCY array 1 goto SF_RIDISP] |
|
|
|
2 |
[If RI_OUTCM=3 goto RINOTES_PRE] [If RI_OUTCM=2 and ORIOUT_RSLT=A, B1, C1, B2, C2 or VINT goto RINOTES_PRE] [If RI_OUTCM=1 and all elements in DISCREPANCY array blank goto RINOTES_PRE] [If RI_OUTCM=1 and DISCREPANCY [6] = 6 and all other elements in DISCREPANCY array blank goto RINOTES_PRE] [goto DISCREP_NOTES] |
|
|
|
3 |
[If RI_OUTCM=3 goto RINOTES_PRE] [If RI_OUTCM=2 and ORIOUT_RSLT=A, B1, C1, B2, C2 or VINT goto RINOTES_PRE] [If RI_OUTCM=1 and all elements in DISCREPANCY array blank goto RINOTES_PRE] [If RI_OUTCM=1 and DISCREPANCY [6] = 6 and all other elements in DISCREPANCY array blank goto RINOTES_PRE] [If RI_OUTCM=1 and only one element in DISCREPANCY array 1 goto RINOTES_PRE] [If RI_OUTCM=2 and ORIOUT_RSLT=INT and DISCREPANCY [2] = 2 and all other elements in DISCREPANCY array blank goto RINOTES_PRE] [goto NSF_RIDISP] |
• FILL INSTRUCTIONS
If DISCREPANCY array contains one or more codes, fill “Your reinterview indicates the following discrepancies:” and the code and description of each code listed in DISCREPANCY array with the code’s description from Attachment I.
Else fill “Your reinterview did not indicate any discrepancies.”
SPECIAL INSTRUCTIONS
Coding Cases Verified as Correct:
If FALSIF = 2 or 3 and RI_OUTCM = 1 and all elements in DISCREPANCY array blank, set OUTCOME = 201 and RI_DISP = 001.
If FALSIF = 2 or 3 and RI_OUTCM = 1 and DISCREPANCY[6] = 6 and all other elements in DISCREPANCY array blank, set OUTCOME = 201 and RI_DISP = 001
Coding Original Type A Noninterview Cases:
If FALSIF = 1 and RI_OUTCM = 2 and ORIOUT_RSLT = A, set OUTCOME = 301 and RI_DISP = 103.
If FALSIF = 2 or 3 and RI_OUTCM = 2 and ORIOUT_RSLT = A, set OUTCOME = 301 and RI_DISP = 058.
Coding Cases Verified as Reinterview Noninterview:
If FALSIF = 1 and NONINT = 4, set OUTCOME = 360 and RI_DISP = 085.
If FALSIF = 1 and TYPEA = 1, set OUTCOME = 214 and RI_DISP = 105.
If FALSIF = 1 and TYPEA = 2, set OUTCOME = 214 and RI_DISP = 067.
If FALSIF = 1 and TYPEA = 3, set OUTCOME = 216 and RI_DISP = 068.
If FALSIF = 1 and TYPEA = 4, set OUTCOME = 217 and RI_DISP = 069.
If FALSIF = 1 and TYPEA = 5, set OUTCOME = 218 and RI_DISP = 086.
If FALSIF = 1 and TYPEA = 6, set OUTCOME = 213 and RI_DISP = 087.
If FALSIF = 1 and TYPEA = 7, set OUTCOME = 219 and RI_DISP = 090.
If FALSIF = 1 and TYPEA = 8, set OUTCOME = 215 and RI_DISP = 089.
If FALSIF = 1 and TYPEA = 9, set OUTCOME = 219 and RI_DISP = 090.
If FALSIF = 1 and TYPEB = 1, set OUTCOME = 226 and RI_DISP = 071.
If FALSIF = 1 and TYPEB = 2, set OUTCOME = 227 and RI_DISP = 073.
If FALSIF = 1 and TYPEB = 3, set OUTCOME = 230 and RI_DISP = 074.
If FALSIF = 1 and TYPEB = 4, set OUTCOME = 231 and RI_DISP = 075.
If FALSIF = 1 and TYPEB = 5, set OUTCOME = 228 and RI_DISP = 077.
If FALSIF = 1 and TYPEB = 6, set OUTCOME = 234 and RI_DISP = 076.
If FALSIF = 1 and TYPEB = 7, set OUTCOME = 224 and RI_DISP = 091.
If FALSIF = 1 and TYPEB = 8, set OUTCOME = 225 and RI_DISP = 092.
If FALSIF = 1 and TYPEB = 9, set OUTCOME = 233 and RI_DISP = 094.
If FALSIF = 1 and TYPEB_ALT = 1, set OUTCOME = 226 and RI_DISP = 071.
If FALSIF = 1 and TYPEB_ALT = 2, set OUTCOME = 326 and RI_DISP = 072.
If FALSIF = 1 and TYPEB_ALT = 3, set OUTCOME = 227 and RI_DISP = 073.
If FALSIF = 1 and TYPEB_ALT = 4, set OUTCOME = 230 and RI_DISP = 074.
If FALSIF = 1 and TYPEB_ALT = 5, set OUTCOME = 231 and RI_DISP = 075.
If FALSIF = 1 and TYPEB_ALT = 6, set OUTCOME = 228 and RI_DISP = 077.
If FALSIF = 1 and TYPEB_ALT = 7, set OUTCOME = 234 and RI_DISP = 076.
If FALSIF = 1 and TYPEB_ALT = 8, set OUTCOME = 224 and RI_DISP = 091.
If FALSIF = 1 and TYPEB_ALT = 9, set OUTCOME = 225 and RI_DISP = 092.
If FALSIF = 1 and TYPEB_ALT = 10, set OUTCOME = 225 and RI_DISP = 093.
If FALSIF = 1 and TYPEB_ALT = 11, set OUTCOME = 233 and RI_DISP = 094.
If FALSIF = 1 and TYPEC = 1, set OUTCOME = 240 and RI_DISP = 078.
If FALSIF = 1 and TYPEC = 2, set OUTCOME = 241 and RI_DISP = 079.
If FALSIF = 1 and TYPEC = 3, set OUTCOME = 243 and RI_DISP = 080.
If FALSIF = 1 and TYPEC = 4, set OUTCOME = 245 and RI_DISP = 081.
If FALSIF = 1 and TYPEC = 5, set OUTCOME = 250 and RI_DISP = 083.
If FALSIF = 1 and TYPEC = 6, set OUTCOME = 251 and RI_DISP = 084.
If FALSIF = 1 and TYPEC = 7, set OUTCOME = 248 and RI_DISP = 095.
If FALSIF = 2 or 3 and NONINT = 4, set OUTCOME = 360 and RI_DISP = 032
If FALSIF = 2 or 3 and TYPEA = 1, set OUTCOME = 214 and RI_DISP = 003.
If FALSIF = 2 or 3 and TYPEA = 2, set OUTCOME = 214 and RI_DISP = 013.
If FALSIF = 2 or 3 and TYPEA = 3, set OUTCOME = 216 and RI_DISP = 014.
If FALSIF = 2 or 3 and TYPEA = 4, set OUTCOME = 217 and RI_DISP = 015.
If FALSIF = 2 or 3 and TYPEA = 5, set OUTCOME = 218 and RI_DISP = 033.
If FALSIF = 2 or 3 and TYPEA = 6, set OUTCOME = 213 and RI_DISP = 034.
If FALSIF = 2 or 3 and TYPEA = 7, set OUTCOME = 218 and RI_DISP = 035.
If FALSIF = 2 or 3 and TYPEA = 8, set OUTCOME = 215 and RI_DISP = 036.
If FALSIF = 2 or 3 and TYPEA = 9, set OUTCOME = 219 and RI_DISP = 037.
If FALSIF = 2 or 3 and TYPEB = 1, set OUTCOME = 226 and RI_DISP = 017.
If FALSIF = 2 or 3 and TYPEB = 2, set OUTCOME = 227 and RI_DISP = 019.
If FALSIF = 2 or 3 and TYPEB = 3, set OUTCOME = 230 and RI_DISP = 020.
If FALSIF = 2 or 3 and TYPEB = 4, set OUTCOME = 231 and RI_DISP = 021.
If FALSIF = 2 or 3 and TYPEB = 5, set OUTCOME = 228 and RI_DISP = 023.
If FALSIF = 2 or 3 and TYPEB = 6, set OUTCOME = 234 and RI_DISP = 022.
If FALSIF = 2 or 3 and TYPEB = 7, set OUTCOME = 224 and RI_DISP = 038.
If FALSIF = 2 or 3 and TYPEB = 8, set OUTCOME = 225 and RI_DISP = 039.
If FALSIF = 2 or 3 and TYPEB = 9, set OUTCOME = 233 and RI_DISP = 041.
If FALSIF = 2 or 3 and TYPEB_ALT = 1, set OUTCOME = 226 and RI_DISP = 017.
If FALSIF = 2 or 3 and TYPEB_ALT = 2, set OUTCOME = 326 and RI_DISP = 018.
If FALSIF = 2 or 3 and TYPEB_ALT = 3, set OUTCOME = 227 and RI_DISP = 019.
If FALSIF = 2 or 3 and TYPEB_ALT = 4, set OUTCOME = 230 and RI_DISP = 020.
If FALSIF = 2 or 3 and TYPEB_ALT = 5, set OUTCOME = 231 and RI_DISP = 021.
If FALSIF = 2 or 3 and TYPEB_ALT = 6, set OUTCOME = 228 and RI_DISP = 023.
If FALSIF = 2 or 3 and TYPEB_ALT = 7, set OUTCOME = 234 and RI_DISP = 022.
If FALSIF = 2 or 3 and TYPEB_ALT = 8, set OUTCOME = 224 and RI_DISP = 038.
If FALSIF = 2 or 3 and TYPEB_ALT = 9, set OUTCOME = 225 and RI_DISP = 039.
If FALSIF = 2 or 3 and TYPEB_ALT = 10, set OUTCOME = 225 and RI_DISP = 040.
If FALSIF = 2 or 3 and TYPEB_ALT = 11, set OUTCOME = 233 and RI_DISP = 041.
If FALSIF = 2 or 3 and TYPEC = 1, set OUTCOME = 240 and RI_DISP = 024.
If FALSIF = 2 or 3 and TYPEC = 2, set OUTCOME = 241 and RI_DISP = 025.
If FALSIF = 2 or 3 and TYPEC = 3, set OUTCOME = 243 and RI_DISP = 026.
If FALSIF = 2 or 3 and TYPEC = 4, set OUTCOME = 245 and RI_DISP = 027.
If FALSIF = 2 or 3 and TYPEC = 5, set OUTCOME = 250 and RI_DISP = 030.
If FALSIF = 2 or 3 and TYPEC = 6, set OUTCOME = 251 and RI_DISP = 031.
If FALSIF = 2 or 3 and TYPEC = 7, set OUTCOME = 248 and RI_DISP = 042.
Coding Misclassified Original Type B, C, or Vacant Interview Cases:
If FALSIF = 1 and (MISC_B = 1 or MISC_BVINT = 1), set OUTCOME = 301 and RI_DISP = 096.
If FALSIF = 1 and (MISC_B = 3 or MISC_BVINT = 4), set OUTCOME = 301 and RI_DISP = 099.
If FALSIF = 1 and (MISC_B = 4 or MISC_BVINT = 5), set OUTCOME = 301 and RI_DISP = 100.
If FALSIF = 1 and (MISC_C = 1 or MISC_CVINT = 1), set OUTCOME = 301 and RI_DISP = 097.
If FALSIF = 1 and (MISC_C = 2 or MISC_CVINT = 3), set OUTCOME = 301 and RI_DISP = 101.
If FALSIF = 1 and (MISC_C = 4 or MISC_CVINT = 5), set OUTCOME = 301 and RI_DISP = 102.
If FALSIF = 1 and (MISC_B = 2 or MISC_BVINT = 3 or MISC_C = 3 or MISC_CVINT = 4), set OUTCOME = 301 and RI_DISP = 103.
If FALSIF = 1 and MISC_VINT = 1, set OUTCOME = 301 and RI_DISP = 106.
If FALSIF = 1 and MISC_VINT = 2, set OUTCOME = 301 and RI_DISP = 104.
If FALSIF = 1 and MISC_BVINT = 2, set OUTCOME = 301 and RI_DISP = 109.
If FALSIF = 1 and MISC_CVINT = 2, set OUTCOME = 301 and RI_DISP = 108.
If FALSIF = 2 or 3 and (MISC_B = 1 or MISC_BVINT = 1), set OUTCOME = 301 and RI_DISP = 043.
If FALSIF = 2 or 3 and (MISC_B = 3 or MISC_BVINT = 4), set OUTCOME = 301 and RI_DISP = 046.
If FALSIF = 2 or 3 and (MISC_B = 4 or MISC_BVINT = 5), set OUTCOME = 301 and RI_DISP = 047.
If FALSIF = 2 or 3 and (MISC_C = 1 or MISC_CVINT = 1), set OUTCOME = 301 and RI_DISP = 044.
If FALSIF = 2 or 3 and (MISC_C = 2 or MISC_CVINT = 3), set OUTCOME = 301 and RI_DISP = 048.
If FALSIF = 2 or 3 and (MISC_C = 4 or MISC_CVINT = 5), set OUTCOME = 301 and RI_DISP = 049.
If FALSIF = 2 or 3 and (MISC_B = 2 or MISC_BVINT = 3 or MISC_C = 3 or MISC_CVINT = 4), set OUTCOME = 301 and RI_DISP = 058.
If FALSIF = 2 or 3 and MISC_VINT = 1, set OUTCOME = 301 and RI_DISP = 059.
If FALSIF = 2 or 3 and MISC_VINT = 2, set OUTCOME = 301 and RI_DISP = 051.
If FALSIF = 2 or 3 and MISC_BVINT = 2, set OUTCOME = 301 and RI_DISP = 050.
If FALSIF = 2 or 3 and MISC_CVINT = 2, set OUTCOME = 301 and RI_DISP = 045.
Coding Cases with Discrepancies:
If FALSIF = 1 and RI_OUTCM = 2 and ORIOUT_RSLT = INT, set OUTCOME = 301 and RI_DISP = 060
If FALSIF = 1 and RI_OUTCM = 1 and DISCREPANCY[1] = 1 and all other elements in DISCREPANCY array blank, set OUTCOME = 301 and RI_DISP = 066.
If FALSIF = 1 and RI_OUTCM = 1 and DISCREPANCY[6] = 6 and all other elements in DISCREPANCY array blank, set OUTCOME = 301 and RI_DISP = 066.
If FALSIF = 1 and RI_OUTCM = 1 and DISCREPANCY[7] = 7 and all other elements in DISCREPANCY array blank, set OUTCOME = 301 and RI_DISP = 061.
If FALSIF = 1 and RI_OUTCM = 1 and DISCREPANCY[8] = 8 and all other elements in DISCREPANCY array blank, set OUTCOME = 301 and RI_DISP = 062.
If FALSIF = 1 and RI_OUTCM = 1 and DISCREPANCY[9] = 9 and all other elements in DISCREPANCY array blank, set OUTCOME = 301 and RI_DISP = 111.
If FALSIF = 1 and RI_OUTCM = 1 and DISCREPANCY[10] = 10 and all other elements in DISCREPANCY array blank, set OUTCOME = 301 and RI_DISP = 112.
If FALSIF = 1 and RI_OUTCM = 1 and DISCREPANCY[12] = 12 and all other elements in DISCREPANCY array blank, set OUTCOME = 301 and RI_DISP = 110.
FALSIF = 3 and RI_OUTCM = 1 and DISCREPANCY[1] = 1 and all other elements in DISCREPANCY array blank, set OUTCOME = 301 and RI_DISP = 012.
If FALSIF = 3 and RI_OUTCM = 1 and DISCREPANCY[7] = 7 and all other elements in DISCREPANCY array blank, set OUTCOME = 301 and RI_DISP = 009.
If FALSIF = 3 and RI_OUTCM = 1 and DISCREPANCY[8] = 8 and all other elements in DISCREPANCY array blank, set OUTCOME = 301 and RI_DISP = 005.
If FALSIF = 3 and RI_OUTCM = 1 and DISCREPANCY[9] = 9 and all other elements in DISCREPANCY array blank, set OUTCOME = 301 and RI_DISP = 011.
If FALSIF = 3 and RI_OUTCM = 1 and DISCREPANCY[10] = 10 and all other elements in DISCREPANCY array blank, set OUTCOME = 301 and RI_DISP = 004.
If FALSIF = 3 and RI_OUTCM = 1 and DISCREPANCY[12] = 12 and all other elements in DISCREPANCY array blank, set OUTCOME = 301 and RI_DISP = 010.
If FALSIF = 3 and RI_OUTCM = 2 and ORIOUT_RSLT = INT and DISCREPANCY[2] = 2 and all other elements in DISCREPANCY array blank, set OUTCOME = 301 and RI_DISP = 012.
------------------------------------------------------------------------------------------------------------------
UNIVERSE - (FALSIF = 2 and RI_OUTCM = 1 and DISCREPANCY [6] = blank and one or more elements in DISCREPANCY array 1) or
(FALSIF = 2 and RI_OUTCM = 1 and two or more elements in DISCREPANCY array 1) or
(FALSIF = 2 and RI_OUTCM = 2 and ORIOUT_RSLT = INT) or
Explain why you do not suspect falsification in the Reinterview Notes now.
Press Ctrl-F7 to access Reinterview Notes.
Enter 1 when done with your explanation in the Reinterview Notes.
|
• |
Name |
Description |
Value |
Skip |
|
DISCREP_NOTES |
Discrepancy notes |
1 |
[If only one element in array DISCREPANCY 1 goto RINOTES_PRE] [goto NSF_RIDISP] |
SPECIAL INSTRUCTIONS
If FALSIF = 2 and RI_OUTCM = 1 and DISCREPANCY[1] = 1 and all other elements in DISCREPANCY array blank, set OUTCOME = 301 and RI_DISP = 012.
If FALSIF = 2 and RI_OUTCM = 1 and DISCREPANCY[7] = 7 and all other elements in DISCREPANCY array blank, set OUTCOME = 301 and RI_DISP = 009.
If FALSIF = 2 and RI_OUTCM = 1 and DISCREPANCY[8] = 8 and all other elements in DISCREPANCY array blank, set OUTCOME = 301 and RI_DISP = 005.
If FALSIF = 2 and RI_OUTCM = 1 and DISCREPANCY[9] = 9 and all other elements in DISCREPANCY array blank, set OUTCOME = 301 and RI_DISP = 011.
If FALSIF = 2 and RI_OUTCM = 1 and DISCREPANCY[10] = 10 and all other elements in DISCREPANCY array blank, set OUTCOME = 301 and RI_DISP = 004.
If FALSIF = 2 and RI_OUTCM = 1 and DISCREPANCY[12] = 12 and all other elements in DISCREPANCY array blank, set OUTCOME = 301 and RI_DISP = 010.
If FALSIF = 2 and RI_OUTCM = 2 and ORIOUT_RSLT = INT and DISCREPANCY[2] = 2 and all other elements in DISCREPANCY array blank, set OUTCOME = 301 and RI_DISP = 012.
------------------------------------------------------------------------------------------------------------------
UNIVERSE - (DISCREP_NOTES = 1 and two or more elements in DISCREPANCY array 1) or (FALSIF = 3 and RI_OUTCM = 1 and two or more elements in DISCREPANCY array 1) or
(FALSIF = 3 and RI_OUTCM = 2 and ORIOUT_RSLT = INT and two or more elements in DISCREPANCY array 1)
Your reinterview detected multiple discrepancies.
|
1. Respondent said no one contacted household. 2. You determined original status, 201 - Interview, incorrect. 6. Respondent indicated original status incorrect. 7. Household roster incorrect. 8. Not all original survey questions asked. 9. (S)FR conducted a telephone interview only when personal visit required. 10. Case done by a personal visit and respondent said laptop not used. 12. CU make-up incorrect. |
• |
Name |
Description |
Value |
Skip |
|
NSF_RIDISP
|
Discrepancy options - no suspected falsification |
<1-20 12> |
[goto RINOTES_PRE] |
SPECIAL INSTRUCTIONS
List in the answer list section only the choices that correspond to elements in DISCREPANCY array 1.
Allow only a value in NSF_RIDISP that corresponds to an element in DISCREPANCY array 1.
If NSF_RIDISP = 1, set OUTCOME = 301 and RI_DISP = 012.
If NSF_RIDISP = 2, set OUTCOME = 301 and RI_DISP = 012.
If NSF_RIDISP = 6, set OUTCOME = 301 and RI_DISP = 012.
If NSF_RIDISP = 7, set OUTCOME = 301 and RI_DISP = 009.
If NSF_RIDISP = 8, set OUTCOME = 301 and RI_DISP = 005.
If NSF_RIDISP = 9, set OUTCOME = 301 and RI_DISP = 011.
If NSF_RIDISP = 10, set OUTCOME = 301 and RI_DISP = 004.
If NSF_RIDISP = 12, set OUTCOME = 301 and RI_DISP = 010.
----------------------------------------------------------------------------------------------------------------------
UNIVERSE - (FALSIF = 1 and RI_OUTCM=1 and two or more elements in DISCREPANCY array 1.
Your reinterview detected multiple discrepancies.
Enter the code of the detected discrepancy which best describes the primary reason you suspect falsification.
|
1. Respondent said no one contacted household. 6. Respondent indicated original status incorrect. 7. Household roster incorrect. 8. Not all original survey questions asked. 9. (S)FR conducted a telephone interview only when personal visit required. 10. Case done by a personal visit and respondent said laptop not used. 12. CU make-up incorrect. |
• |
Name |
Description |
Value |
Skip |
|
SF_RIDISP |
Discrepancy options - suspect falsification |
<1- 20 12> |
[goto RINOTES_PRE] |
SPECIAL INSTRUCTIONS
List in the answer list section only the choices that correspond to elements in DISCREPANCY array 1.
Allow only a value in SF_RIDISP that corresponds to an element in DISCREPANCY array 1.
If SF_RIDISP = 1, set OUTCOME = 301 and RI_DISP = 066
If SF_RIDISP = 6, set OUTCOME = 301 and RI_DISP = 066
If SF_RIDISP = 7, set OUTCOME = 301 and RI_DISP = 061
If SF_RIDISP = 8, set OUTCOME = 301 and RI_DISP = 062
If SF_RIDISP = 9, set OUTCOME = 301 and RI_DISP = 111
If SF_RIDISP = 10, set OUTCOME = 301 and RI_DISP = 112
If SF_RIDISP = 12, set OUTCOME = 301 and RI_DISP = 110.
----------------------------------------------------------------------------------------------------------------------
XVI. Sufficient Partial/Complete (201)
To be considered a sufficient partial/complete reinterview (201), one of the following questions must be completed:
CONTACT_C
STATUS
STAT_PROBE
VERBYOBS
VERTYPEA
VACANT
XVII. Attachments
Attachment A: CEQ 2007 Reinterview Instrument Screen Index
Attachment B: CEQ 2007 Reinterview Instrument Flowcharts
Attachment C: CEQ 2007 Reinterview Instrument Flowchart Index
Attachment D: CEQ 2007 Sample Redesign Reinterview SCIF
Attachment E: List of Original Outcome Codes in the CEQ Original Instrument
Attachment F: CEQ 2007 Reinterview Disposition, Outcome, and Action Codes
Attachment G: HH Roster Variable Descriptions Used in the CEQ 2007 Reinterview Instrument
Attachment H: Original Outcome Code Descriptions for the STATUS Screen
Attachment I: Discrepancy Codes and Descriptions for Elements in DISCREPANCY Array
Attachment J: Original Instrument Specification for the BYOBS and Contact Person Information Screens
If you have any questions regarding this document, please contact Patty Hartman at x31975.
Attachments (10)
cc:
C. Pickering BLS
S. Smiley DSD
R. Roberts "
J. Ruffin FLD
W. Dyer TMO
R. Michalco "
J. Scott DSMD
C. Barnes "
C. Wrenn-Yorker "
P. Hartman "
B. Zhang "
CU_LISTING 41
DIAL 26 - 27
DISCREP_NOTES 80
FALSIF 74 - 79
H_PURPOSE 16
H_PURPOSE1 17
H_PURPOSE2 18
H_PURPOSE3 19
H_PURPOSE4 20
H_PURPOSE5 21
HHCOMP 25
MULTI_FOOD 51
MULTI_HOUSING 50
MULTI_OTHER 52 - 53
MULTI-RELATED 48 - 49
NSF_RIDISP 81
ORMODE 30
PHONE_REQUEST 31
POLITE 32
RIREF3 15
RIRESP 28 - 29
ROSTER_1 33 - 24
ROSTER_2 35
ROSTER_3 36 - 37
ROSTER_4 38
SF_RIDISP 82
SINGLE_FOOD 45
SINGLE_HOUSING 44
SINGLE_OTHER 46 - 47
SINGLE_RELATED 42 - 43
START 22 - 24
SURVEY_1 39 - 40
SURVEY_2 58 (deleted)
SURVEY_3 59 (deleted)
SURVEY_4 60 (deleted)
SURVEY _ 1_1 61 (added)
SURVEY _ 1_2 62 (added)
SURVEY _ 1_3 63 (added)
SURVEY _ 2_1 64 (added)
SURVEY _ 2_2 65 (added)
SURVEY _2_3 66 (added)
SURVEY _3_1 67 (added)
SURVEY _3_2 68 (added)
SURVEY _3_3 69 (added)
SURVEY_5 70 (deleted)
SURVEY_6 71
TENURE_1 54
TENURE_2 55
TENURE_3 56
TENURE_4 57
THANK_YOU 72 -73
ADDVER Front: 4, 5, 6, 7, 8
APPT Front: 4, 6, 7, 8, Back: 21
APPT2 Front: 5, 6, 7, 8, Back: 21
BY_OBS Front: 2
CBTHANK Back: 21
CKSUP Front: 6
CONTACT_C Middle: 9
CONTACT_N Front: 4, 5, 6, 7, Middle: 13
CU-LISTING Middle: 12
DIAL Front: 2, 4, 5
DISCREP_NOTES Back: 14
_END_ Front: 4
FALSIF Front: 3, Back: 14, (14a, 14b), 16, 18
FIN Back: 21
H_ABBREV1 Front: 1
H_PURPOSE Front: 1
H_PURPOSE1-5 Front: 1
HELLO_PC Front: 6
HELLO_PCX Front: 6, 7
HELLO_PN Front: 6, 7
HELLO_PNX Front: 6, 7
HELLO_TC Front: 4, 5
HELLO_TCX Front: 4
HELLO_TN Front: 4, 5
HELLO_TNX Front: 4
HHCOMP Front: 1, 2
HHMEM Front: 5, 6, 8
HHMEM2 Front: 8
_INTRO_ Front: 4, 5
INTRO_PC Front: 6
INTRO_PN Front: 7
INTRO_TC Front: 5
INTRO_TN Front: 5
KEY_REF Front: 1
LAPTOP Middle: 9, 13
LENGTH_H Middle: 9
LENGTH_M Middle: 9
METHOD Front: 2
MISC_B Front: 3, Back: 18
MISC_BVINT Front: 3, Back: 18
MISC_C Front: 3, Back: 18
MISC_CVINT Front: 3, Back: 18
MISC_VINT Front: 3, Back: 18
MULTI_HOUSING Middle: 12
MULTI_FOOD Middle: 12
MULTI_OTHER Middle: 12
MULTI_RELATED Middle: 12
NEWNUMBER_A Front: 4
NEWNUMBER_CE Front: 4
NEWNUMBER_CP Front: 4
NEWNUMBER_E Front: 4
NEWNUMBER_P Front: 4
NEWNUMBER_S Front: 4
NO_DISCREP Back: 14
NONINT Front: 3, Back: 16, 18, 19
NSF_RIDISP Back: 14a, 14b, 15
ORMODE Middle: 9, 13
PHONE_REQUEST Middle: 9
POLITE Middle: 9, 13
PO_ NOTES Middle: 9, 13
PROX_ C Front: 8
PROX_ N Front: 5, 7
PROX_ PRESENT Middle: 9, 13
PROX_ UC Front: 8
PROX_ UN Front: 6
READYWRAP Back: 21
REFNUM Front: 5
RINOTES _ PRE Front: 2, 3, 4, 6, Back: 14, 14a, 14b, 15, 17, 19, 21
RIREASON Front: 1
RIREF1-4 Front: 1
RIRESP Front: 5, 6, 8, Middle: 9
RI_ OUTCM Front: 6, 8, Back: 18, 19, 20, 21
ROSTER_1 Middle: 9, 10
ROSTER_2-4 Middle: 10
RO_ DISC Front: 2, Back: 17
SF_RIDISP Back: 14, 17
SINGLE_ FOOD Middle: 12
SINGLE_ HOUSING Middle: 12
SINGLE_ OTHER Middle: 12
SINGLE_ RELATED Middle: 12
SOMEONE_ELSE Middle: 9, 13
SPEAKTO Middle: 9, 13
SPEAKTO2 Middle: 11
START Front: 2
START_1 Front: 2
START_1A Front: 2
STAT_PROBE Middle: 13
STAT_PROB2 Middle: 11, 13
STAT_VER Middle: 11
STATUS Middle: 13
STATUS_RI Front: 2, 4, 5, 6, 7, Back: 19, 20, 21
SURVEY_1 Middle: 10, 11, 12
SURVEY_1_1 Middle: 12a
SURVEY_1_2 Middle: 12a
SURVEY_1_3 Middle: 12a
SURVEY _2_1 Middle: 12a
SURVEY_2_2 Middle: 12a
SURVEY_2_3 Middle: 12a
SURVEY_3_1 Middle: 12a
SURVEY_3_2 Middle: 12a
SURVEY_3_3 Middle: 12a
SURVEY_6 Middle: 12b
TENURE_1 Middle:12, 12a
TENURE_2 Middle: 12a
TENURE_3 Middle: 12a
TENURE_4 Middle:12a
THANK_ NOHH Front: 8, Back: 19
THANK_ REF Front: 5, 6, 7, Back: 19
THANK_ SORRY Front: 6, Back: 19
THANK_ YOU Front: 5, 6, 7, 8, Middle: 11, 12a,12b, 13, Back: 20
TYPEA Back: 16
TYPEB Back: 16
TYPEB_ ALT Back: 16
TYPEC Back: 16
VACANT Middle: 11, 13
VACANT2 Middle: 11
VERBYOBS Front: 2, 3, 6
VERTYPEA Front: 2, 3, 6
VERTELE Front: 5
WRNUM Front: 5
SCIF Record Type 85 Subtype 00 (Dependent Data)
|
|
|
|
RT850000 |
|
Name/Description
|
Instrument Variable Name |
Length |
Record Position |
Values |
Required |
Household Level Variables |
|||||
Record Type - Hard-coded information used by TMO control systems. |
RecType |
2 |
1-2 |
85 |
|
Record Sub-Type - Hard-coded information used by TMO control systems. |
RecSubType |
2 |
3-4 |
00 |
|
Roster Information - Hard-coded information used by Blaise to indicate the first record of an entity. |
ROSTERINFO |
34 |
5-38 |
varies |
|
By Observation Flag |
BYOBS
|
1 |
39-39 |
1=observation only 2=information provided by contact person 0 or empty=question not asked for Interview or Type A |
|
Reassignment |
REASSG |
1 |
40-40 |
|
|
Original Interview Date |
INTDATE |
8 |
41 - 48 |
date original instrument last touched Format: mmddyyyy |
|
Original Interview Time |
INTTIME |
6 |
49 -54 |
time original instrument last touched Format: hhmmss in military time |
|
Length of Original Interview |
LENGTH |
8 |
55 -62 |
|
|
Personal Visit/Telephone Flag |
TELPV |
1 |
63 - 63 |
1=personal visit 2=phone |
|
Language of Original Interview |
LANG_OI |
20 |
64 - 83 |
|
|
Other Type A Noninterview - specified write-in
Note: Variable name TYPEASP in original instrument. Converted to TYPEA_SP in manipula script |
TYPEA_SP |
45 |
84-128 |
|
|
Other Type B Noninterview - specified write-in |
TYPEB_SP |
45 |
129-173 |
|
|
Other Type C Noninterview - specified write-in |
TYPEC_SP |
45 |
174-218 |
|
|
HH Number |
HHNUMB |
1 |
219-219 |
TMO pulls from position 19 of Control Number (CTRLNUM). |
|
CU Number |
CUNUMB |
2 |
220-221 |
TMO pulls from positions 20-21 of Control Number (CTRLNUM). |
|
Year Built - indicates whether the unit was built before or after April 1, 1990. |
YRBLT |
1 |
222-222 |
|
|
Coverage Question10a |
BUILD |
1 |
223-223 |
1 = Yes 2 = No D = Don’t Know |
|
Coverage Question10c |
PROPER |
1 |
224-224 |
1 = Yes 2 = No D = Don’t Know |
|
Classification of Living Quarter |
HUTYPE |
2 |
225-226 |
1 = House 2 = HU in nontransient hotel 3 = HU permanent in transient hotel 4 = HU in rooming house 5 = Mobile home/trailer with no permanent room added 6 = Mobile home/trailer with permanent room(s) added 7 = HU not specified above 8 = Quarters not HU in rooming 9 = student quarters 10 = other unit not specified above |
|
|
|
|
|
|
|
CU Tenure-used as student housing |
ST_HOUS |
1 |
227-227 |
1 = Student housing 2 = Not student housing |
|
CU Tenure-owned or being bought |
OWNED |
1 |
228-228 |
1 = Yes 2 = No |
|
CU Tenure-pay rent |
RENTED |
1 |
229-229 |
1 = Yes 2 = No |
|
CU Tenure-reduced or free rent
Note: The manipula script for this variable is SECTOR02.RENT(1).RTASPAY. The original instrument output wanted is RTASPAY when SAMP_UN=1. |
RTASPAY |
1 |
230-230 |
1 = Yes 2 = No |
|
Total number of CUs in household |
TOTAL_CU |
2 |
231-232 |
|
|
Reference month |
REF_MONTH |
9 |
233-241 |
January, February, March, ..., November, December |
|
Number of persons in primary CU |
NUMHOUSE |
2 |
242-243 |
|
|
Frame - Design Frame, also called segment type in the TMO systems. |
FRAME |
1 |
244-244 |
1 = Area 2 = Unit 3 = Group Quarter (GQ) 4 = Permit 5 = Address |
|
Permit/Non-Permit Status - indicates whether or not the block was screened as being in a permit issuing area. |
PRMITSTA |
1 |
245-245 |
N = non-permit P = permit |
|
Design Flag - Design Year |
DESIGN |
2 |
246-247 |
00 = 2000 80 = 1980 90 = 1990 |
|
Language used to conduct interview
|
LANGUAGE |
1 |
248-248 |
1 = English 2 = Spanish 3 = Other |
|
Line number of primary respondent |
RESPON |
2 |
249-250 |
|
|
Group number of section questions selected for reinterview
Note: Value filled by LEVSPB-DSMD as defined in Addendum Specifications |
SURVEY_SET |
1 |
251-252 |
|
|
|
|
|
|
|
|
Person Level Variables1 |
|
|
|
|
|
Record Type |
RecType |
2 |
1-2 |
85 |
|
Record Sub-Type |
RecSubType |
2 |
3-4 |
00 |
|
Block Number |
na |
20 |
5-24 |
01 Left justify and blank fill. |
|
Total Number of Records for Block (i.e., total number of household members) |
NROSIZE |
4 |
25-28 |
Right justify and zero fill |
|
Blank area |
na |
8 |
29-36 |
|
|
Line Number (i.e., sequential “line number’ for each record within block starting with 1)
Note: Variable name MEMBNO in original instrument. Converted to LNO in manipula script. |
LNO
|
2 |
37-38 |
Right justify and zero fill |
|
Eligible Respondent Flag |
QCRESP |
1 |
39-39 |
0 = not respondent 1 = main respondent (based on RESPON in original instrument) 2 = other respondent ( based on OTHRESP in original instrument) |
|
First Name |
FNAME |
20 |
40 - 59 |
Length of 16 plus pad 4 spaces |
|
Last Name |
LNAME |
20 |
60 -79 |
Length of 16 plus pad 4 spaces |
|
Age |
AGE |
3 |
80 - 82 |
|
|
|
RACE |
2 |
83 - 84 |
|
|
Multiple Race |
MULTR |
1 |
85 - 85 |
|
Race |
Relationship
Note: Variable name CU_CODE in original instrument. Converted to REL in manipula script. |
REL |
2 |
86 - 87 |
1=Reference person 2=Spouse 3=Child 4=Grandchild 5=In-law 6=Brother/Sister 7=Parent(s) 8=Other related person 9=unrelated person 10= unmarried partner |
|
Sex |
SEX |
1 |
88-88 |
1=Male 2-Female |
|
Household Status Flay |
MEMBSTAT |
1 |
89 - 89 |
1=delete 2=reinstate 5=skip |
|
Removed from Household |
PERSTAT |
3 |
90 - 92
|
7=delete 9=reinstate 99=should not be listed 998=refused 999=don't know |
|
Away at College |
AWAY_COL |
1 |
93-93 |
1=Yes 2=No 8=Refused 9=Don’t know |
|
Household Member |
HH_MEM |
1 |
94-94 |
1=Yes 2=No |
|
CU Number |
PERCUNUM |
2 |
95-96 |
1, 2, 3, ..., 99 |
|
List of Original Outcome Codes in the CEQ Original Instrument
OUTCOME Description
Interviews or Unresolved
200 New case, not started
201 Completed interview
202 Case started, insufficient partial
203 Partial - Transmit, no more follow-up possible.
204 Partial - Callback to complete
206 Don’t know follow-up needed
Type As
216 Type A - No one home (unable to contact)
217 Type A - Temporarily absent
219 Other Type A
321 Type A - Refused, Hostile respondent
322 Type A - Refused, Time related excuses
323 Type A - Refused, Language problems
324 Type A - Refused, Other
Type Bs
224 Type B – All persons under 16
225 Type B - Occupied by persons with URE
226 Type B - Vacant for rent
228 Type B - Unfit, to be demolished
229 Type B - Under construction, not ready
231 Type B - Unoccupied tent/trailer site
232 Type B - Permit granted, construction not started
233 Type B - Other
331 Type B - Vacant for sale
332 Type B - Vacant other
Type Cs
240 Type C - Demolished
241 Type C - House or trailer moved
243 Type C - Converted to permanent nonresidential use
244 Type C - Merged units within same structure
245 Type C - Condemned
246 Type C - Built After April 1, 2000
247 Type C - Unused serial # or listing sheet (Note: Ineligible for reinterview)
248 Type C - Other
252 Type C - Located on military base or post
OUTCOME Description
Type Cs - continued
256 Type C – Removed during subsampling (Note: Ineligible for reinterview)
257 Type C – Unit already had a chance of selection (Note: Ineligible for reinterview)
290 Type C – Spawned in error (Note: Ineligible for reinterview)
341 (BYOBS=1, 2) Type C - CU moved
341 (BYOBS blank) Type C - Household replaced (Note: Ineligible for reinterview)
342 Type C - CU merged with another CE CU within same address
CEQ 2007 REINTERVIEW
REINTERVIEW DISPOSITION, OUTCOME, and ACTION CODES
No Suspected Falsification:
1Disposition 2Outcome Action Description
N/A 200 00 New case, not started
N/A 202 01 Accessed instrument, no interview or insufficient partial
001 201 10 Original interview or noninterview verified as correct
Type As
003 214 21 Unable to complete, bad telephone number
013 214 21 Unable to locate
014 216 21 No one home
015 217 21 Temporarily absent
033 218 21 Refused
034 213 21 Language problem
035 218 21 Respondent can't remember
036 215 21 Insufficient partial
037 219 21 Other Type A
Type Bs
017 226 31 Vacant, regular or seasonal
019 227 31 Vacant, storage of household furniture
020 230 31 Converted to temporary business or storage
021 231 31 Unoccupied tent or trailer site
022 234 31 HH institutionalized or temporarily ineligible
023 228 31 Unfit, to be demolished
038 224 31 Entire HH under or over age limit
039 225 31 Temporarily occupied by persons with URE
041 233 31 Other Type B
Type Cs
024 240 41 Demolished
025 241 41 House or trailer moved
026 243 41 Converted to permanent business or storage
027 245 41 Condemned
030 250 41 Deceased
031 251 41 Moved out of country
042 248 41 Other Type C
No Suspected Falsification:
1Disposition 2Outcome Action Description
Type Ds
032 360 51 HH replaced by new HH since original interview
Misclassified Cases
043 301 11 Originally classified as a B, should have been an Interview or Type A
044 301 11 Originally classified as a C, should have been an Interview or Type A
046 301 11 Originally classified as a B, should have been a C
048 301 11 Originally classified as a C, should have been a B
058 301 11 Other misclassification - specify in the notes
Discrepancy Cases
004 301 11 Discrepancy - laptop not used
005 301 11 Discrepancy ‑ not all questions asked in original interview
009 301 11 Discrepancy - incorrect household roster
010 301 11 Discrepancy - incorrect CU determination
011 301 11 Discrepancy - telephone interview when personal visit required
012 301 11 Other discrepancy - no suspected falsification
RO/HQ Discretion
029 312 21 HQ discretion - permanent (sample adjustment)
052 311 21 RO discretion ‑ permanent (hard to interview original case)
053 312 21 RO discretion ‑ temporary (more than 50 miles from nearest reinterviewer and no phone number)
054 312 21 RO discretion ‑ temporary (observed during the original interview)
055 312 21 RO discretion ‑ temporary (personal visit needed, but not authorized)
056 312 21 HQ discretion ‑ temporary (case management, ROSCO problems)
057 312 21 RO discretion ‑ temporary (other)
Suspected Falsification:
1Disposition 2Outcome Action Description
060 301 11 Suspected falsification of a case turned in as an interview
Type As
105 214 21 Unable to complete, bad telephone number
067 214 21 Unable to locate
068 216 21 No one home
069 217 21 Temporarily absent
086 218 21 Refused
087 213 21 Language problem
089 215 21 Insufficient partial
090 219 21 Other Type A
Type Bs
071 226 31 Vacant, regular or seasonal
073 227 31 Vacant, storage of household furniture
074 230 31 Converted to temporary business or storage
075 231 31 Unoccupied tent or trailer site
076 234 31 HH institutionalized or temporarily ineligible
077 228 31 Unfit, to be demolished
091 224 31 Entire HH under or over age limit
092 225 31 Temporarily occupied by persons with URE
094 233 31 Other Type B
Type Cs
078 240 41 Demolished
079 241 41 House or trailer moved
080 243 41 Converted to permanent business or storage
081 245 41 Condemned
083 250 41 Deceased
084 251 41 Moved out of country
095 248 41 Other Type C
Type Ds
085 360 51 HH replaced by new HH since original interview
Suspected Falsification:
1Disposition 2Outcome Action Description
Misclassified Cases
096 301 11 Originally classified as a B, should have been an Interview or Type A
097 301 11 Originally classified as a C, should have been an Interview or Type A
099 301 11 Originally classified as a B, should have been a C
101 301 11 Originally classified as a C, should have been a B
103 301 11 Other misclassification - specify in the notes
Discrepancy Cases
061 301 11 Discrepancy - incorrect household roster
062 301 11 Discrepancy ‑ not all questions asked in interview
066 301 11 Other discrepancy - suspected falsification
110 301 11 Discrepancy – incorrect CU determination
111 301 11 Discrepancy – telephone interview when personal visit required
112 301 11 Discrepancy – laptop not used
Household Roster Variable Descriptions
Used in the CEQ 2007 Reinterview Instrument
The table below contains the values and descriptions for the household roster variables used in the CEQ 2000 Sample Redesign reinterview instrument.
Variable |
Value |
Description |
REL |
01 |
Reference person |
|
02 |
Spouse |
|
03 |
Child |
|
04 |
Grandchild |
|
05 |
In-law |
|
06 |
Brother/Sister |
|
07 |
Mother/Father |
|
08 |
Other related person |
|
09 |
Unrelated person |
|
10 |
Unmarried partner |
SEX |
1 |
Male |
|
2 |
Female |
AWAY_COL |
1 |
Yes |
|
2 |
No |
|
8 |
Refused |
|
9 |
Don’t know |
HH_MEM |
1 |
Yes |
|
2 |
No |
CEQ 2007 Reinterview Original Outcome Codes Descriptions for the STATUS Screen
|
|
Use the following descriptions for the original outcome codes to fill ORIOUT’s description on the STATUS screen. |
|
If original outcome code is: |
fill with: |
224 |
"was a home where the entire household was under 16 years old." |
225 |
"was occupied by persons who usually live at another address." |
226, 331, 332 |
"was vacant." |
228 |
"was unfit to live in or scheduled to be demolished." |
229 |
"was under construction." |
231 |
"was an unoccupied tent or trailer site." |
232 |
"was a building site where construction had not started." |
240 |
"was demolished." |
241 |
"was a lot that a house or trailer had been moved off of." |
243 |
"was converted to permanent nonresidential use." |
244 |
"was merged with another unit within the same structure." |
245 |
"was condemned." |
246 |
"was built after April 1, 1990." |
252 |
"was located on a military base or post.” |
CEQ 2007 Reinterivew
Discrepancy Codes and Descriptions for Elements in DISCREPANCY Array
Element/
Code Description
1. The reinterview respondent said no one contacted this household regarding this survey.
2. You determined that the original status, [Fill: ORIOUT] - [Fill: ORIOUT’s description from Attachment E], was incorrect.
3. The status of this case was completed by observation in the original interview. You determined that the original status, [Fill: ORIOUT] - [Fill: ORIOUT’s description from Attachment E] was incorrect.
4. This case was a Type A in the original interview. You determined that the original status, [Fill: ORIOUT] - [Fill: ORIOUT’s description from Attachment E], was incorrect.
5. The (S)FR classified this unit as a Type B or Type C Noninterview and you determined that it should have been an Interview or Type A.
6. The reinterview respondent indicated that the original status, [Fill: ORIOUT] - [Fill: ORIOUT’s description from Attachment E] was incorrect.
7. The household roster was incorrect.
8. Not all survey questions were asked in the interview.
9. The (S)FR conducted a telephone interview only instead of a personal visit interview, as required.
10. This case was done by a personal visit and the reinterview respondent said the (S)FR did not use a laptop.
11. The (S)FR entered a bad telephone number for this case.
12. The make-up of the CU(s) was incorrect.
Original Instrument Specifications for the
BYOBS and Contact Person Information Screens
Note: This attachment defines original instrument screens used to collect information on Type B and C noninterviews needed for reinterview.
______________________________________________________________________________
UNIVERSE - screen(s) at end of original interview for Type B and C Noninterview cases
Was the noninterview status determined by observation only or did someone provide information about the sample unit?
|
1. Observation Only 2. Information Provided by Someone |
• |
Name |
Description |
Value |
Skip |
|
BYOBS |
Noninterview by observation or contact person |
1 |
[continue interview] |
|
|
|
2 |
[go to BCINFO] |
SPECIAL INSTRUCTIONS
If BYOBS = 2, set CP1TYPE = 1.
------------------------------------------------------------------------------------------------------------------
UNIVERSE - BYOBS = 2
Collect information about the Type B/C contact person who helped you determine the status of the sample unit.
Name: (enter contact person’s name) Title: (enter contact person’s title, ex. relative, neighbor, etc.) Address: (enter contact person’s address - line 1) (enter contact person’s address - line 2) City: (enter contact person’s city) State: (enter contact person’s state) Zip Code: (enter contact person’s ZIP code and ZIP4)
Area Code and Phone Number: (enter contact person’s phone number with area code) Extension: (enter contact person’s phone extension)
|
1. Continue |
• |
Name |
Description |
Value |
Skip |
|
BCINFO |
Contact person information for Type B/C Noninterview |
1 |
[continue interview] |
SPECIAL INSTRUCTIONS
Store name in CP1NAME. Allow 42 characters. Blank fill “don’t know” (D) and “refusal” (R).
Store title in CP1TITL. Allow 20 characters.
Store line 1 of address in CP1ADD1. Allow 54 characters.
Store line 2 of address in CP1ADD2. Allow 54 characters.
Store city in CP1PO. Allow 20 characters.
Store state in CP1ST. Allow standard two-character state abbreviations.
Store ZIP code in CP1ZP5. Allow five numeric characters.
Store ZIP4 in CP1ZP4. Allow four numeric characters.
Store area code and phone number in CP1PHON. Allow ten numeric characters.
Store extension in CP1EXT. Allow five numeric characters.
Collect this information each interview period.
------------------------------------------------------------------------------------------------------------------
1Person level variables are repeated for each person on household roster
| File Type | application/msword |
| Author | wetze001 |
| Last Modified By | PICKERING_C |
| File Modified | 2006-08-24 |
| File Created | 2006-08-24 |