Certain Kitchen Appliance Racks and Shelving from China

INSTRUCTION BOOKLET
GENERAL INFORMATION, INSTRUCTIONS, AND
DEFINITIONS FOR COMMISSION QUESTIONNAIRES

Certain Kitchen Appliance Shelving and Racks from China
Investigation Nos. 701-TA-458 and 731-TA-1154 (Preliminary)

Further information.--If you have any questions concerning the enclosed
questionnaire(s) or other matters related to these investigations, you may contact
the following members of the Commission=s staff (Fax 202-205-3205):
Joanna Lo, investigator (202-205-1888; E-mail [email protected])
regarding general questions and trade and related information;
Justin Jee, auditor (202-205-3186; E-mail [email protected])
regarding financial information; and
James Fetzer, economist (202-708-5403; E-mail [email protected])
regarding pricing, market, and related information.

GENERAL INFORMATION
Background.--These investigations are being instituted in response to a petition filed on July 31,
2008, by Nashville Wire Products Inc., Nashville, TN, SSW Holding Company, Inc.,
Elizabethtown, KY, the United Steel, Paper and Forestry, Rubber, Manufacturing, Energy,
Allied-Industrial and Service Workers International Union, and the International Association of
Machinists and Aerospace Workers, District Loge 6, Clinton, IA. Countervailing or antidumping
duties may be assessed on the subject imports as a result of these investigations if the Commission
makes an affirmative determination of injury, threat, or material retardation, and if the U.S.
Department of Commerce makes an affirmative determination of subsidization and/or dumping.
Questionnaires and other information pertinent to this investigation are available at
http://www.usitc.gov/trade_remedy/731_ad_701_cvd/investigations/2008/kitchen_appliance_she
lving/prelimphase.htm. Address all correspondence to the United States International Trade
Commission, Washington, DC 20436. Hearing-impaired individuals can obtain information
regarding these investigations via the Commission=s TDD terminal (202-205-1810).
Due date of questionnaire(s).--Return the completed questionnaire(s) to the United States
International Trade Commission by no later than August 14, 2008. Although the enclosed
postpaid envelope may be used to return the completed questionnaire, use of an overnight mail
service may be necessary to ensure that your response actually reaches the Commission by August
14, 2008. If you do not use the enclosed envelope, please make sure the completed questionnaire
is sent to the attention of Joanna Lo. Return only one copy of the completed questionnaire(s),
but please keep a copy for your records so that you can refer to it if the Commission staff
contacts you with any questions during the course of the investigations.
Service of questionnaire response(s).--In the event that your firm is a party to these investigations,
you are required to serve a copy of the questionnaire(s), once completed, on parties to the
proceeding that are subject to administrative protective order (see 19 CFR ' 207.7). A list of such
parties is maintained by the Commission=s Secretary and may be obtained by calling
202-205-1803. A certificate of service must accompany the copy of the completed questionnaire(s)
you submit (see 19 CFR ' 207.7).
Confidentiality.--The commercial and financial data furnished in response to the enclosed
questionnaire(s) that reveal the individual operations of your firm will be treated as confidential by
the Commission to the extent that such data are not otherwise available to the public and will not
be disclosed except as may be required by law (see 19 U.S.C. ' 1677f). Such confidential
information will not be published in a manner that will reveal the individual operations of your
firm; however, nonnumerical characterizations of numerical business proprietary information
(such as discussion of trends) will be treated as confidential business information only at the
request of the submitter for good cause shown.

2

GENERAL INFORMATION--Continued
Verification.--The information submitted in the enclosed questionnaire(s) is subject to audit
and verification by the Commission. To facilitate possible verification of data, please keep
all your workpapers and supporting documents used in the preparation of the questionnaire
response(s).
Release of information.--The information provided by your firm in response to the
questionnaire(s), as well as any other business proprietary information submitted by your firm to
the Commission in connection with the investigations, may become subject to, and released under,
the administrative protective order provisions of the Tariff Act of 1930 (19 U.S.C. ' 1677f) and
section 207.7 of the Commission=s Rules of Practice and Procedure (19 CFR ' 207.7). This means
that certain lawyers and other authorized individuals may temporarily be given access to the
information for use in connection with these investigations or other import-injury investigations
conducted by the Commission on the same or similar merchandise; those individuals would be
subject to severe penalties if the information were divulged to unauthorized individuals. In
addition, if your firm is a U.S. producer, the information you provide on your production and
imports of certain kitchen appliance shelving and racks and your responses to the questions in Part
I of the producer questionnaire will be provided to the U.S. Department of Commerce, upon its
request, for use in connection with (and only in connection with) its requirement pursuant to
section 702(c)(4)/732(c)(4) of the Act (19 U.S.C. ' 1671a(c)(4)/1673a(c)(4)) to make a
determination concerning the extent of industry support for the petition requesting these
investigations. Any information provided to Commerce will be transmitted under the
confidentiality and release guidelines set forth above. Your response to these questions constitutes
your consent that such information be provided to Commerce under the conditions described
above.

INSTRUCTIONS
Answer all questions.--Do not leave any question or section blank unless a questionnaire
expressly directs you to skip over certain questions or sections. If the answer to any question is
Anone,@ write Anone.@ If information is not readily available from your records in exactly the
form requested, furnish carefully prepared estimates--designated as such by the letter
AE@--and explain the basis of your estimates. Answers to questions and any necessary
comments or explanations should be supplied in the space provided or on separate sheets attached
to the appropriate page of the questionnaire(s). If your firm is completing more than one
questionnaire in connection with these investigations (i.e., a producer, importer, and/or purchaser
questionnaire), you need not respond to duplicated questions in the questionnaires.
Consolidate all U.S. establishments.--Report the requested data for your establishment(s) located
in the United States. Firms operating more than one establishment should combine the data
for all establishments into a single report.
Filing instructions.—Questionnaires may be filed either in paper form or electronically.
3

INSTRUCTIONS--Continued
OPTIONS FOR FILING IN PAPER FORM
• Overnight mail service.—Mail to the following address:
United States International Trade Commission
Office of Investigations, Room 615
500 E Street SW
Washington, DC 20024
• Fax.—Fax to 202.205.3205.
• U.S. mail.—Mail to the address above, but use zip code 20436. This option is not recommended.
U.S. mail sent to government offices undergoes additional processing to screen for hazardous
materials; this additional processing results in substantial delays in delivery.
OPTIONS FOR FILING ELECTRONICALLY
This questionnaire is available as a “fillable” form in MS Word format on the
Commission’s website at
http://www.usitc.gov/trade_remedy/731_ad_701_cvd/investigations/2008/kitchen
_appliance_shelving/prelimphase.htm. Please do not attempt to modify the
format or permissions of the questionnaire document. You may complete the
questionnaire electronically, print it out, and submit it in paper form as described
above, or you may submit it electronically through one of the following means:
• By means of the Commission’s Electronic Document Information System (EDIS).—Follow
the step-by-step instructions on the next page.
• Compact disc (CD).—Copy your questionnaire onto a CD, include a signed certification page
(page 1) (either in paper form or scanned PDF copied onto CD), and mail to the address above. It
is strongly recommended that you use an overnight mail service. U.S. mail sent to government
offices undergoes additional processing which not only results in substantial delays in delivery but
may also damage CDs.
• E-mail.—E-mail your questionnaire to the investigator identified on page 1 of the Instruction
Booklet; include a scanned PDF of the signed certification page (page 1). Type the following in
the e-mail subject line: BPI Questionnaire, INV. NO. 458. Please note that submitting your
questionnaire by e-mail may subject your firm’s business proprietary information to transmission
over an unsecure environment and to possible disclosure. If you choose this option, the
Commission warns you that any risk involving possible disclosure of such information is assumed
by the submitter and not by the Commission.

4

INSTRUCTIONS--Continued
Note: If you are a party to the investigations, and service of the questionnaire is required, such
service should be made in paper form.
INSTRUCTIONS FOR FILING VIA EDIS
STEP 1: REGISTER AS A NEW USER IN EDIS (current registered users may skip this step)
• The authorized official whose name appears under the Certification at the bottom of page
1 of the questionnaire should be the person who completes the registration in EDIS
• Go to https://eofpub.usitc.gov/edis-efile/app
• Click on Register
• Read and accept the Terms of Use Agreement
• Complete the EDIS Online User Registration form
o In the Firm/Organization field, select Questionnaire Respondent
• Click Submit Registration
STEP 2: ELECTRONICALLY SUBMIT YOUR QUESTIONNAIRE(S) IN EDIS
• Click on E-File Documents
• Under Submitter Information, type the name of your firm in the Filed On Behalf Of
field
• Under Investigation Information, click on Find Investigation
o For Investigation Phase, select “Prelim” and for Investigation Number, type
“701-458”; Click on Find Investigation
o Click in the circle to the left of the investigation number that appears, then click on
Select and confirm by clicking OK
• Under Document Filing Information—
o For Document Type, select Questionnaire – Foreign Producer, Questionnaire
– Importer, Questionnaire – Purchaser, or Questionnaire – U.S. Producer, as
appropriate
o Leave Document Title field blank
• Under Add Document Attachments for Electronic Submission—
o In the Attach File field, click on Browse, locate your MS Word questionnaire file,
and double-click the file
o The Attachment Title field is optional
o Click on Attach Files (note that your file will be listed below under Attachments)
o You must attach a scanned PDF of the signed certification page (page 1). If you
wish to attach any other files, i.e., supporting documents, do so at this time (unlike
the questionnaire itself, these additional documents must be PDFs). Only one
questionnaire may be filed at a time.
o When you have attached all relevant files, click on Submit Document
w/attachments. An EDIS Document Submission Confirmation screen will
appear. Confirm the information and click on Accept Information. An EDIS
Notice of Receipt of Electronic Documents will appear, which completes the
process. If you wish to electronically file another questionnaire, repeat Step 2.
5

DEFINITIONS
Product.--The scope of these investigations consists of shelving and racks for refrigerators,
freezers, combined refrigerator-freezers, other refrigerating or freezing equipment, cooking stoves,
ranges, and ovens (“certain kitchen appliance shelving and racks”). Certain kitchen appliance
shelving and racks are defined as shelving, baskets, racks (with or without extension slides, which
are carbon or stainless steel hardware devices that are connected to shelving, baskets, or racks to
enable sliding), side racks (which are welded wire support structures for oven racks that attach to
the interior walls of an oven cavity that does not include support ribs as a design feature), and
subframes (which are welded wire support structures that interface with formed support ribs inside
an oven cavity to support oven rack assemblies utilizing extension slides) with the following
dimensions:
--shelving and racks with dimensions ranging from 3 inches by 5 inches by 0.10
inch to 28 inches by 34 inches by 6 inches; or
--baskets with dimensions ranging from 2 inches by 4 inches by 3 inches to 28
inches by 34 inches by 16 inches; or
--side racks from 6 inches by 8 inches by 0.1 inch to 16 inches by 30 inches by 4
inches; or
--subframes from 6 inches by 10 inches by 0.1 inch to 28 inches by 34 inches by 6
inches.
The subject merchandise is comprised of carbon or stainless steel wire ranging in thickness
from 0.050 inch to 0.500 inch and may include sheet metal of either carbon or stainless steel
ranging in thickness from 0.020 inch to 0.2 inch. The subject merchandise may be coated or
uncoated and may be formed and/or welded. Excluded from the scope of these investigations is
shelving in which the support surface is glass. Also excluded are shelving and racks that do not
meet the above listed physical descriptions (e.g., shelving and racks for outdoor grills and
commercial appliances). The merchandise subject to these investigations is currently classifiable
in the Harmonized Tariff Schedule of the United States (“HTSUS”) statistical reporting numbers
8418.99.8050, 7321.90.5000, and 8516.90.8000.
Firm.--An individual proprietorship, partnership, joint venture, association, corporation
(including any subsidiary corporation), business trust, cooperative, trustee in bankruptcy, or
receiver under decree of any court.
Related firm.--A firm that your firm solely or jointly owned, managed, or otherwise controlled; a
firm that solely or jointly owned, managed, or otherwise controlled your firm; and/or a firm that
was solely or jointly owned, managed, or otherwise controlled by a firm that also solely or jointly
owned, managed, or otherwise controlled your firm.

6

DEFINITIONS--Continued
Establishment.--Each facility of a firm in the United States involved in the production,
importation, and/or purchase of certain kitchen appliance shelving and racks (as defined above),
including auxiliary facilities operated in conjunction with (whether or not physically separate from)
such facilities.
United States.--For purposes of these investigations, the 50 States, Puerto Rico, the U.S. Virgin
Islands, and the District of Columbia.
Importer.--Any person or firm engaged, either directly or through a parent company or subsidiary,
in importing certain kitchen appliance shelving and racks (as defined above) into the United States
from a foreign manufacturer or through its selling agent.
Imports.--Those products identified for Customs purposes as imports for consumption for which
your firm was the importer of record (i.e., was responsible for paying any import duty) or
consignee (i.e., to which the merchandise was first delivered).
Import quantities.--Quantities reported should be net of returns.
Import values.--Values reported should be landed, duty-paid values at the U.S. port of
entry, including ocean freight and insurance costs, brokerage charges, and import duties (i.e., all
charges except inland freight in the United States).
Purchaser.--Any person or firm engaged, either directly or through a parent company or
subsidiary, in purchasing certain kitchen appliance shelving and racks (as defined above) from
another firm that produces, imports, or otherwise distributes certain kitchen appliance shelving
and racks. A retail firm that is the importer of record may be considered a purchaser.
Purchases.--Purchases from all sources, NOT including direct imports from foreign producers
(which should be reported in an importer questionnaire).
Purchase quantities.--Quantities reported should be net of returns.
Purchase values.--Values reported should be net values (i.e., gross purchase values less all
discounts, allowances, rebates, and the value of returned goods), delivered to your U.S.
receiving point.

7

DEFINITIONS--Continued
Shipments.--Shipments of products produced in or imported by your U.S. establishment(s).
Include shipments to the contracting firm of product produced by your firm under a toll agreement.
Shipment quantities.--Quantities reported should be net of returns.
Shipment values.--Values reported should be net values (i.e., gross sales values less all
discounts, allowances, rebates, prepaid freight, and the value of returned goods), f.o.b.
your U.S. point of shipment. The value of domestic shipments to the contracting firm
under a toll agreement is the conversion fee (including profit).
Types of shipments:
U.S. shipments.--Commercial shipments, internal consumption, and transfers to related
firms within the United States.
Commercial shipments.--Shipments, other than internal consumption and transfers
to related firms, within the United States.
Internal consumption.--Product consumed internally by your firm.
Transfers to related firms.--Shipments made to related domestic firms.
Export shipments.--Shipments to destinations outside the United States, including
shipments to related firms.
Inventories.--Finished goods inventory, not raw materials or work-in-progress.
The following definitions apply only to the PRODUCER QUESTIONNAIRE.
Average production capacity.--The level of production that your establishment(s) could
reasonably have expected to attain during the specified periods. Assume normal operating
conditions (i.e., using equipment and machinery in place and ready to operate; normal operating
levels (hours per week/weeks per year) and time for downtime, maintenance, repair, and cleanup;
and a typical or representative product mix).
Toll agreement.--Agreement between two firms whereby the first firm furnishes the raw materials
and the second firm uses the raw materials to produce a product that it then returns to the first firm
with a charge for processing costs, overhead, etc.
Production.--All production in your U.S. establishment(s), including production consumed
internally within your firm and production for another firm under a toll agreement.

8

DEFINITIONS--Continued
PRWs.--Production and related workers, including working supervisors and all nonsupervisory
workers (including group leaders and trainees) engaged in fabricating, processing, assembling,
inspecting, receiving, storage, handling, packing, warehousing, shipping, trucking, hauling,
maintenance, repair, janitorial and guard services, product development, auxiliary production for
plant=s own use (e.g., power plant), recordkeeping, and other services closely associated with the
above production operations.
Average number employed.--Add the number of employees, both full-time and part-time, for the
12 pay periods ending closest to the 15th of the month and divide that total by 12. For the
January-June periods, calculate similarly and divide by 6.
Hours worked.--Include time paid for sick leave, holidays, and vacation time. Include overtime
hours actually worked; do not convert overtime pay to its equivalent in straight-time hours.
Wages paid.--Total wages paid before deductions of any kind (e.g., withholding taxes, old-age and
unemployment insurance, group insurance, union dues, bonds, etc.). Include wages paid directly
by your firm for overtime, holidays, vacations, and sick leave.
Fiscal year.--The 12-month period between settlement of your firm=s financial accounts.
Purchases other than direct imports.--Purchases from U.S. producers, U.S. importers, and other
U.S. sources.

9