NESHAP for Plating and Polishing Area Sources (40 CFR part 63, subpart WWWWWW) (Final Rule)

Forms and Documents

Document Name	Status
Plating and Polishing Final Signature-6-11-08.doc Supplementary Document	2008-06-11
Supporting statement-Plating&Polish-REV01-28-09.doc Supporting Statement A	2009-01-28

IC Document Collections

IC ID	Document Title	Status
185560	National Emission Standards for Hazardous Air Pollutants for Plating and Polishing Area Sources	New

ICR Details

OMB Control No: 2060-0623	ICR Reference No: 200901-2060-010
Status: Historical Active	Previous ICR Reference No: 200807-2060-002
Agency/Subagency: EPA/OAR	Agency Tracking No: 2294.02
Title: NESHAP for Plating and Polishing Area Sources (40 CFR part 63, subpart WWWWWW) (Final Rule)
Type of Information Collection: New collection (Request for a new OMB Control Number)	Common Form ICR:  No
Type of Review Request: Regular
OIRA Conclusion Action: Approved without change	Conclusion Date: 01/30/2009
	Date Received in OIRA: 01/30/2009
Terms of Clearance:

	Inventory as of this Action	Requested	Previously Approved
Expiration Date	01/31/2012	36 Months From Approved
Responses	2,030	0	0
Time Burden (Hours)	33,290	0	0
Cost Burden (Dollars)	8,314	0	0

---

Abstract: EPA is issuing national emission standards for control of hazardous air pollutants (HAP) for the plating and polishing area source category. This final rule establishes emission standards in the form of management practices for new and existing tanks, thermal spraying equipment, and mechanical polishing equipment in certain plating and polishing processes. These final emission standards reflect EPA's determination regarding the generally achievable control technology (GACT) and/or management practices for the area source category.

---

Authorizing Statute(s): US Code: 42 USC 7401 et seq Name of Law: Clean Air Act
  

Citations for New Statutory Requirements: None

---

Associated Rulemaking Information
RIN:	Stage of Rulemaking:	Federal Register Citation:	Date:
2060-AM37	Final or interim final rulemaking	73 FR 37727	07/01/2008

---

Federal Register Notices & Comments

Did the Agency receive public comments on this ICR? Yes

---

Number of Information Collection (IC) in this ICR: 1

IC Title	Form No.	Form Name
National Emission Standards for Hazardous Air Pollutants for Plating and Polishing Area Sources

---

ICR Summary of Burden

	Total Approved	Previously Approved	Change Due to New Statute	Change Due to Agency Discretion	Change Due to Adjustment in Estimate	Change Due to Potential Violation of the PRA
Annual Number of Responses	2,030	0	0	2,030	0	0
Annual Time Burden (Hours)	33,290	0	0	33,290	0	0
Annual Cost Burden (Dollars)	8,314	0	0	8,314	0	0

Burden increases because of Program Change due to Agency Discretion: Yes

Burden Increase Due to: Changing Regulations

Burden decreases because of Program Change due to Agency Discretion: No

Burden Reduction Due to:

Short Statement: EPA is issuing national emission standards for control of hazardous air pollutants (HAP) for the plating and polishing area source category. This final rule establishes emission standards in the form of management practices for new and existing tanks, thermal spraying equipment, and mechanical polishing equipment in certain plating and polishing processes.

---

Annual Cost to Federal Government: $147,261

Does this IC contain surveys, censuses, or employ statistical methods? No

Is the Supporting Statement intended to be a Privacy Impact Assessment required by the E-Government Act of 2002? No

Is this ICR related to the Affordable Care Act [Pub. L. 111-148 & 111-152]? Uncollected

Is this ICR related to the Dodd-Frank Wall Street Reform and Consumer Protection Act, [Pub. L. 111-203]? Uncollected

Is this ICR related to the American Recovery and Reinvestment Act of 2009 (ARRA)? Uncollected

Is this ICR related to the Pandemic Response? Uncollected

---

Common Form ICR:  No

---

On behalf of this Federal agency, I certify that the collection of information encompassed by this request complies with 5 CFR 1320.9 and the related provisions of 5 CFR 1320.8(b)(3).

The following is a summary of the topics, regarding the proposed collection of information, that the certification covers:

(a) It is necessary for the proper performance of agency functions;

(b) It avoids unnecessary duplication;

(c) It reduces burden on small entities;

(d) It uses plain, coherent, and unambiguous language that is understandable to respondents;

(e) Its implementation will be consistent and compatible with current reporting and recordkeeping practices;

(f) It indicates the retention periods for recordkeeping requirements;

(g) It informs respondents of the information called for under 5 CFR 1320.8 (b)(3) about:

(i) Why the information is being collected;

(ii) Use of information;

(iii) Burden estimate;

(iv) Nature of response (voluntary, required for a benefit, or mandatory);

(v) Nature and extent of confidentiality; and

(vi) Need to display currently valid OMB control number;

(h) It was developed by an office that has planned and allocated resources for the efficient and effective management and use of the information to be collected.

(i) It uses effective and efficient statistical survey methodology (if applicable); and

(j) It makes appropriate use of information technology.

If you are unable to certify compliance with any of these provisions, identify the item by leaving the box unchecked and explain the reason in the Supporting Statement.

Certification Date: 07/02/2008

---