SUPPLEMENTAL INSTRUCTIONS AND DEFINITIONS FORM: | |||||||||
General: | |||||||||
· Do not include logs, bolts, or chips sold or transferred from your mill/plant to another mill/plant. | |||||||||
We want to eliminate double reporting of wood used in pulp and particleboard manufacturing. | |||||||||
· If reporting for more than one mill/plant, please use a separate form for each mill/plant. | |||||||||
Page 1: | |||||||||
· Fill in the name of the plant or company and its mailing address. Also, the name and | |||||||||
telephone number of a person that can be contacted if there are any questions concerning the data. | |||||||||
· Under the section labeled "MILL TYPE/PROCESS" please check the box that best describes your mill. | |||||||||
Use "Other:_____" if your type of mill is not listed and print the type of mill in the space provided. | |||||||||
· Under the title "Product produced", please check the box that best indicates the major product | |||||||||
the mill produces from the roundwood received for the year. To the right of the box is a list of | |||||||||
the primary products, if the mill produces anything other than what is on the list please check box | |||||||||
code 39 for pulp products, or 49 for particleboard products, and print the name of the major | |||||||||
product produced. | |||||||||
· Fill in the amount in tons per day for pulp mills or hundreds square feet 3/4-inch basis for particleboard | |||||||||
plants of the average production at your plant after the label "Average production:_____." | |||||||||
· The Note section can be used to comment on events that may have effected the mills production, | |||||||||
such as extended down time or mill expansions. | |||||||||
Page 2&3: Section I ROUNDWOOD AND CHIPS FROM ROUNDWOOD RECEIVED | |||||||||
· In the section labeled "Check unit of measure" check the box that describes the scale used | |||||||||
to measure the wood at the mill yard. | |||||||||
· Under the "Origin of Pulpwood" show the state and county or foreign country where | |||||||||
the timber was harvested. | |||||||||
· Chips from roundwood are chips produced from logs, bolts, tops, limb wood, and whole trees | |||||||||
that have been completely chipped. | |||||||||
· When whole tree chip receipts are recorded, please write (W) after the quantity. | |||||||||
When peeled roundwood receipts are recorded, please write (P) after the quantity. | |||||||||
(Debarked chips should be recorded as peeled roundwood - (P) ) | |||||||||
· Receipts of chips from roundwood should be recorded in section I, never in Section II. Receipt | |||||||||
of chips from mill residues (slabs, edgings, veneer cores, and other byproducts) are | |||||||||
recorded in Section II. | |||||||||
Page 4: Section II PLANT BYPRODUCTS RECEIVED FOR USE AS PULPWOOD | |||||||||
· Check the appropriate box under "Unit of Measure". | |||||||||
· The Origin of Byproducts is the state or foreign country where the mill producing the byproduct | |||||||||
is located. County of origin of byproducts does not need to be reported. | |||||||||
· Receipts of mill residues or chipped mill residues (slabs, edgings, veneer cores, sawdust, and | |||||||||
other byproducts) should be recorded in Section II, never in Section I. | |||||||||
· Do not record receipts of mill residues (slabs, edgings, veneer cores, sawdust, and | |||||||||
other byproducts) that are burned for fuel. | |||||||||
· Chips receipts from chip-n-saw operations are recorded in Section II, if the chips came from | |||||||||
logs and bolts used to produce both lumber and chips as joint products. Here, the | |||||||||
chips are arbitrarily considered a byproduct. | |||||||||
Section III DISPOSITION OF BARK RESIDUE AND FINES | |||||||||
· Enter your best estimate of the percentage of bark and fines that was used for the various | |||||||||
purposes indicated. | |||||||||
· The percentages for each species of bark and fines should each add to 100%. |
FOREST SERVICE, U.S. DEPARTMENT OF AGRICULTURE | Form Approved | ||||||||||||
Northern Research Station | OMB No. 0596-0010 | ||||||||||||
1992 Folwell Avenue | Expires: | ||||||||||||
St. Paul, Minnesota 55108 | |||||||||||||
WOOD RECEIVED FOR PULP MANUFACTURING | |||||||||||||
Calendar Year ____ | |||||||||||||
Company Name: | |||||||||||||
Mailing Address: | |||||||||||||
(Street or Box) | |||||||||||||
(City) | (ST) | (Zip) | |||||||||||
Person to contact regarding this report | Title | ||||||||||||
Phone number | |||||||||||||
Instructions: This form is for reporting the quantity of pulpwood (roundwood, chips, sawdust, and other byproducts) | |||||||||||||
received by this plant during 2007, and the disposition of bark and fines produced. This survey is authorized | |||||||||||||
by PL 93-378 as amended by PL 94-588. Your cooperation is appreciated and needed to make this survey | |||||||||||||
complete, accurate, and timely, although you are not required to respond | |||||||||||||
Please complete this form and return it promptly. If complete records are not available, please give your best estimates. | |||||||||||||
DO NOT INCLUDE LOGS, BOLTS, OR CHIPS SOLD OR TRANSFERRED TO ANOTHER PLANT. | |||||||||||||
ALL REPLIES WILL BE HELD CONFIDENTIAL AND WILL BE USED ONLY FOR STATISTICAL REPORTS | |||||||||||||
For Official Use Only. | |||||||||||||
Mill #:__1_____ State:_____ County:_____ Product:__03__ Total volume:_____________ | |||||||||||||
XXX XX XXX XX XXXXXXX | |||||||||||||
MILL TYPE/PROCESS | PRODUCT PRODUCED | Notes: | |||||||||||
Check only one | Check only one | ||||||||||||
XX | XX | ||||||||||||
31 - Sulfite | 31 - Wood pulp/paper | ______________________ | |||||||||||
32 - Kraft | 32 - Medium density fiberboard | ______________________ | |||||||||||
33 - Groundwood/Mechanical | 33 - Corrugated medium | ______________________ | |||||||||||
34 - Semichemical | 34 - Hardboard | ______________________ | |||||||||||
35 - Kraft/Groundwood | 35 - Roofing material | ______________________ | |||||||||||
36 - Thermochemical | 36 - Insulation board | ||||||||||||
37 - Thermomecnanical | 39 - Other:___________________ | ||||||||||||
39 - Other: | Average production | ||||||||||||
(in tons of pulp per day):__________ | |||||||||||||
41 - OSB (Oriented Strand Board) | 41 - Reconstituted panel | ||||||||||||
43 - Particleboard | 42 - Reconstituted lumber | ||||||||||||
44 - Engineered Wood Products | 49 - Other:____________________ | ||||||||||||
49 - Other: | Average production (in thousand square | ||||||||||||
feet 3/4-inch basis per year):__________ | |||||||||||||
Public reporting burden for this collection of information is estimated to average 30 minutes per response, including the time for reviewing | |||||||||||||
instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of | |||||||||||||
information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions | |||||||||||||
for reducing this burden, to Department of Agriculture, Clearance Officer, OIRM, Room 404-W. Washington, DC 20250; and to the | |||||||||||||
Office of Management and Budget, Paperwork Reduction Project (OMB# 0596-0010), Washington, DC 20503. |
For Official Use Only. | Instructions: | Select the unit of measure the volume is reported in. Indicate the State and County of origin, | |||||||||||||||||||||||||||||||
Mill #:__2_____ State:_____ County:_____ Product:__03__ Product form:__1__ Prodout:_____ | and the volume of roundwood (logs or whole tree chips) for each species group. | ||||||||||||||||||||||||||||||||
XXX XX XXX XX X XX | For whole tree chip volumes, enter a "W" after the volume. | ||||||||||||||||||||||||||||||||
For peeled, or flail debarked roundwood, enter a "P" after the volume. | |||||||||||||||||||||||||||||||||
SECTION I. ROUNDWOOD AND CHIPS FROM ROUNDWOOD RECEIVED | |||||||||||||||||||||||||||||||||
Check unit of measure: xx | ![]() |
![]() |
|||||||||||||||||||||||||||||||
![]() |
04 - Standard cord (4'X4'X96" or 128 cubic feet) | 05 - Green tons | 16 - Lake States cord (4'X4'X100") | ____ - Other (specify)______________________ | |||||||||||||||||||||||||||||
If peeled roundwood or debarked chips, write (P) after quantity. Example: 123(P) | |||||||||||||||||||||||||||||||||
If whole tree chips, write (W) after quantity. Example: 456(W) | |||||||||||||||||||||||||||||||||
Species | |||||||||||||||||||||||||||||||||
Origin of pulpwood | Loblolly/ | Other | Aspen/ | Black | Other | ||||||||||||||||||||||||||||
State | Code | Balsam | Hem- | Jack | Shortleaf | Red | Sugar | White | Other | soft- | balsam | Bass- | Yellow | Other | cherry | Cotton- | Hard | Soft | Red | White | Sweet- | Syca- | Yellow- | hard- | |||||||||
or | Cedar | fir | lock | Larch | pine | pine | pine | pine | pine | pine | Spruce | woods | Ash | poplar | wood | Beech | birch | birch | (only) | wood | Elm | Hickory | maple | maple | oak | oak | gum | more | poplar | woods | |||
foreign | Code | 1 | 4 | 5 | 6 | 7 | 8 | 12 | 13 | 14 | 15 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 33 | 35 | 36 | 39 | 40 | ||
county | XX | County | XXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX |
Page 2 | Page 3 |
SECTION II. PLANT BYPRODUCTS RECEIVED FOR USE AS PULPWOOD | ||||||||||
For Official Use Only. | ||||||||||
Mill #:__2_____ State:_____ County:_____ Product:__03__ Product form:__2__ Prodout:_____ | ||||||||||
XXX XX XXX XX X XX | ||||||||||
Instructions: | Select the unit of measure the volume is reported in. | |||||||||
Indicate the State of origin, plant byproduct, and the volume each species group received. | ||||||||||
Wood chips are chips from coarse mill residues. Whole tree chip volumes should be | ||||||||||
recorded as roundwood on pages 2-3. | ||||||||||
Do not record residues brought in for use as industrial fuel. | ||||||||||
Origin of byproduct | 4 Wood chips | 5 Sawdust | 6 Other byproducts | |||||||
Check only one | State or | Code | 1 Conifer | 2 Hardwood | 1 Conifer | 2 Hardwood | 1 Conifer | 2 Hardwood | ||
Unit of Measure | foreign country | XX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | ||
XX | ||||||||||
04 - Standard cord | ||||||||||
06 - Dry tons | ||||||||||
05 - Green tons | ||||||||||
__ - Other (specify): | ||||||||||
________________ | ||||||||||
SECTION III. DISPOSITION OF BARK RESIDUE AND FINES | ||||||||||
For Official Use Only. | ||||||||||
Mill #:__3_____ State:_____ County:_____ Product:__03__ | ||||||||||
XXX XX XXX XX | ||||||||||
Instructions: | Please enter your best estimate of the percentage of bark and fines that were used for the | |||||||||
various purposes indicated. | ||||||||||
Each column should sum to 100% for each species group recorded. | ||||||||||
BARK | FINES | |||||||||
Conifer | Hardwood | Conifer | Hardwood | |||||||
DISPOSITION OF RESIDUES | 11 | 12 | 31 | 32 | ||||||
XXX | XXX | XXX | XXX | |||||||
1. USED FOR: | X | |||||||||
a. Manufacture of fiber products such as pulp or particle board. | 1 | |||||||||
b. Industrial fuel at this plant. | 3 | |||||||||
c. Industrial fuel at other plants. | 4 | |||||||||
d. Domestic household fuel -- sold or given away | 5 | |||||||||
e. Miscellaneous uses such as livestock bedding, mulch, | ||||||||||
small dimension, and specialty items | 6 | |||||||||
2. NOT USED (including bark burned as waste) | 7 | |||||||||
3. TOTAL | 100% | 100% | 100% | 100% |
File Type | application/vnd.ms-office |
Author | Ronald J. Piva |
Last Modified By | cmwoolley |
File Modified | 2009-11-19 |
File Created | 2000-11-20 |