Download:
pdf |
pdfBureau of Business and Economic Research
Gallagher Business Building, Room 231
The University of Montana
Missoula, Montana 59812-6840
OMB No. 0596-0010
Expires 12-31-09
STATE YEAR--Biomass
Forest Industries Data Collection System
GENERAL INSTRUCTIONS
The objective of this survey is to collect and compile basic data on the source and volume of raw
materials used by the forest products industry in STATE and the volumes and types of finished wood
products produced in the state. Figures from individual firms will be held strictly confidential. Only
summarized data for the industry and for geographic areas will be made available. This report is
authorized by Public Law 98-378. While you are not required to respond, your cooperation is needed to
make the results of this study comprehensive, accurate, and timely.
Please fill out the attached questionnaire as completely and accurately as you can. Some of the
items may not apply to your firm's operations. In that case, please proceed to the next item.
If you have questions concerning the completion of this questionnaire, please call toll free to
Steve Hayes, Todd Morgan, or Jason Brandt, Bureau of Business and Economic Research, 1-877-7002237 for assistance.
When you have completed the questionnaire, please mail the questionnaire in the enclosed
postage-paid reply envelope to the Bureau of Business and Economic Research, or fax to (406) 2432086.
Thank you for your cooperation and assistance. You will be mailed a report when it is
complete.
Public reporting burden for this collection of information is estimated to average 50 minutes per response, including the time for
reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the
collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information,
including suggestions for reducing this burden, to Department of Agriculture, Clearance Officer, OIRM, Room 404-W. Washington,
DC 20250; and to the Office of Management and Budget, Paperwork Reduction Project (OMB# 0596-0010), Washington, DC 20503.
I. Plant Profile
Please complete a separate questionnaire for each plant
A.
Plant name _____________________________________________________________
B.
Mailing address _________________________________________________________
_________________________________________________________
C.
Location (if different from mailing address above)
Street address _________________________________________________________
City or town _____________________________
D.
County _________________
Name of person completing questionnaire ____________________________________
title ___________________________________
telephone number ________________________
Type of plant (check one): ___ Biomass facility
F.
___ Other (specify type)______________________
What year did your facility open? ____________________________________
Was this facility active in YEAR? _____________________________________
G.
Shift and annual production capacity of your facility in YEAR -- estimate capacity after considering normal
maintenance and down time -- in other words, the amount you could have produced if you had sufficient supplies of
raw materials and firm market demand for your products.
Shift
Capacity
Annual
Capacity
Production capacity:
__________MW
_______________MWh
Other capacity: (specify units):
___________
_______________
H.
How many days did your facility operate in YEAR _____________ # of shifts / day ______
I.
Hours per shift ________________________
J.
On average, how many employees worked at your facility in YEAR
Production workers including line supervisors ___________
Administrative and clerical workers
___________
-----------------------If you do not process timber in roundwood form skip to Question II F--------------------------------
K.
For your timber receipts for YEAR, percentage of volume from logs that had a small-end diameter of:
_______% < 4 inches
_______% 4 to 7 inches
_______% 10 to 24 inches
_______% > 24 inches
_______% 7 to 10 inches
Minimum small-end diameter accepted: __________inches; preferred: ___________inches
Maximum large-end diameter accepted: __________inches; preferred: ___________inches
L.
Lengths of logs used in operation:
Minimum _______feet
Preferred _______feet
Maximum _______feet
Multiples of: _____feet
Other ________________________________________________________________________
II. Flow of Raw Materials in Calendar YEAR
A.
Please indicate the volume of timber received by your mill in calendar year YEAR. Indicate the product
type (sawlog, pulpwood, etc.), state and county of origin, and ownership source (industrial
private, non-industrial private, state, tribal, Bureau of Land Management, Forest Service: specify forest). Timber
receipts from the same county and ownership source may be combined. Report volumes in thousand
board feet Scribner (MBF), specify Eastside or Westside Scale or if other units are used, please specify units
of measure. This is for timber in round form and not other raw material received.
*If your operation did not receive any roundwood raw material go to part IIF
Product Type
Volume
State and County
(for non-U.S. logs list country of origin)
Ownership
B.
Indicate the species and percentages of each species received.
Percent of
YEAR receipts
Percent of species
that was standing dead
____________________
___________%
__________%
____________________
___________%
__________%
____________________
___________%
__________%
____________________
___________%
__________%
____________________
___________%
__________%
____________________
___________%
__________%
____________________
___________%
__________%
____________________
___________%
__________%
____________________
___________%
__________%
____________________
___________%
__________%
____________________
___________%
__________%
____________________
___________%
__________%
____________________
___________%
__________%
____________________
___________%
__________%
____________________
___________%
__________%
Species
100 %
C.
Raw material inventory: Beginning YEAR _____________
End YEAR ______________
D.
Did your firm ship any unprocessed timber from this mill location to another facility in YEAR? If so, please
indicate the volume shipped and the county and state where the timber was shipped.
Volume of timber shipped ____ ____________ County and state of receiving mill __________________
Receiving Mill________________________________________________________________________
Volume of timber shipped ____ ____________ County and state of receiving mill __________________
Receiving Mill________________________________________________________________________
II. Flow of Raw Materials in Calendar YEAR (continued)
F.
Please indicate the raw material type (chips, sawdust, shavings, bark, recycled) NOT ROUNDWOOD received
for manufacture of product, the volume received (specify units – green tons, dry tons, BDU, cubic yards, etc.)
and the state or country (if from outside the U.S.)
Raw material Type
G.
Volume (specify units)
State or Country (if outside the U.S.)
Please indicate the raw material type (chips, sawdust, shavings, bark, recycled) NOT ROUNDWOOD received
for fuel, the volume received (specify units) and the state or country (if from outside the U.S.)
Fuel material Type
Volume (specify units)
State or Country (if outside the U.S.)
III. Flow of Finished Products in YEAR
A. Please indicate the volume and sales value (f.o.b. your facility) of products produced and shipped in YEAR, and indicate the percentage of shipments to each
geographic region, using the map on the next page for reference.
--------------------------------------------------------------- Market Areas --------------------------------------------------Product Type
Electricity
Other
Other
Other
Volume & units
Total Sales
Value
STATE
Far
West
Rocky
Mountain
NorthCentral
South
Northeast
__________(MWh)
$ __________
____%
____%
_____%
____%
____%
______________
$ __________
____%
____%
_____%
____%
______________
$ __________
____%
____%
_____%
______________
$ __________
____%
____%
_____%
Thank you for your cooperation.
Canad
a
Pacific
Rim
Countries
Other
Countries
____%
____%
_____%
_____%
____%
____%
____%
_____%
_____%
____%
____%
____%
____%
_____%
_____%
____%
____%
____%
____%
____%
_____%
Alaska
North Dakota
Minnesota
2
Wisconsin
Washington
South Dakota
Michigan
4
Montana
Maine
Iowa
Oregon
Nebraska
Indiana
Ohio
VT
Illinois
NH
Idaho
6
Wyoming
1
Kansas
Missouri
3
CT
RI
Pennsylvania
NJ
Nevada
California
MA
New York
MD
Utah
DE
Colorado
West
Virginia
Virginia
Kentucky
Arizona
New Mexico
North Carolina
Tennessee
Oklahoma
Arkansas
Mississippi
5
South
Carolina
Georgia
Alabama
Texas
Louisiana
2
Hawaii
Florida
File Type | application/pdf |
File Title | Bureau of Business and Economic Research.OMB No |
Author | bber |
File Modified | 2009-11-17 |
File Created | 2009-11-17 |