| NVLAP ECT Test Method Selection List (updated 2009-10-06) | |||
| Standard Category | Test Method Code | Test Method Designation | Test Method Description |
| ECT-EMIS | 12/100063 | CISPR/CEI-IEC 1000-6-3, First Edition (1996-12) | Electromagnetic compatibility (EMC) - Part 6: Generic standards - Section 3: Emission standard for residential, commercial and light-industrial environments |
| ECT-EMIS | 12/100063c | IEC 61000-6-3 (1996), EN 61000-6-3 (2001), A1 (2004) | Electromagnetic Compatibility (EMC) - Part 6: Generic standards - Section 3: Emission standard for residential, commercial, and light-industrial environments. |
| ECT-EMIS | 12/10006cc | EN 61000-6-3 (2001), A11 (2004) and IEC 61000-6-3 (1996) | Electromagnetic compatibility (EMC) - Part 6-3: Generic standards-Emission standard for residential, commercial, and light-industrial environments |
| ECT-EMIS | 12/11451b | ISO 11451-2 (2005) | Road vehicles -- Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 2: Off-vehicle radiation sources |
| ECT-EMIS | 12/11451d | ISO 11451-4 (2006) | Road vehicles -- Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 4: Bulk current injection (BCI) |
| ECT-EMIS | 12/12184 | BS EN 12184 (1999) + Corrigendum No. 1 | Electrically powered wheelchairs, scooters and their chargers - Requirements and test methods |
| ECT-EMIS | 12/12895 | EN 12895 (2000) | Industrial trucks - Electromagnetic compatibility |
| ECT-EMIS | 12/12895a | EN 12895 (2000) | Industrial trucks - Electromagnetic compatibility; (Immunity Testing Only) |
| ECT-EMIS | 12/13309 | BS EN 13309 (2000-09) | Construction machinery. Electromagnetic compatibility of machines with internal electrical power supply |
| ECT-EMIS | 12/13766 | ISO 13766 (1999) | Earth-moving machinery -- Electromagnetic compatibility |
| ECT-EMIS | 12/1399-30 | MIL-STD 1399 Section 300A | Interface standard for Shipboard Systems: Electric Power, Alternating Current |
| ECT-EMIS | 12/14982 | EN ISO 14982 (1998) | Agricultural and forestry machines - Electromagnetic compatibility - Test methods and acceptance criteria (ISO 14982: 1998) |
| ECT-EMIS | 12/160C21 | RTCA/DO-160C (1989) | Environmental Conditions and Test Procedures for Airborne Equipment - Section 21: Emission of Radio Frequency |
| ECT-EMIS | 12/160D21 | RTCA/DO-160D (1997) | Environmental Conditions and Test Procedures for Airborne Equipment - Section 21 - Emission of Radio Frequency Energy |
| ECT-EMIS | 12/160F21 | RTCA/DO-160F (2007) | Environmental Conditions and Test Procedures for Airborne Equipment - Section 21 - Emissions of Radio Frequency Energy |
| ECT-EMIS | 12/331B | MIL-STD-331B | Fuse and Fuse Components, Environmental and Performance Test for |
| ECT-EMIS | 12/4935a | ASTM D 4935-89 (Reapproved 1994) | Standard test method for measuring the electromagnetic shielding effectiveness of planar materials |
| ECT-EMIS | 12/50065-1 | EN 50065-1:2001 | Signalling on Low Voltage electrical Installations in the frequency range 3 kHz to 148,5 kHz - Part 1: General Requirements, frequency bands and electromagnetic disturbances |
| ECT-EMIS | 12/50121cc | 0EN 50121-3-2 (2006) | Railway applications - Electromagnetic compatibility -- Part 3-2: Rolling stock - Apparatus |
| ECT-EMIS | 12/50121e | EN 50121-2 (2006) | Railway applications - Electromagnetic compatibility -- Part 2: Emission of the whole railway system to the outside world |
| ECT-EMIS | 12/50121f | EN 50121-3-1 (2006) | Railway applications - Electromagnetic compatibility -- Part 3-1: Rolling stock - Train and complete vehicle |
| ECT-EMIS | 12/50121g | EN 50121-4 (2006) | Railway applications - Electromagnetic compatibility -- Part 4: Emission and immunity of the signalling and telecommunications apparatus |
| ECT-EMIS | 12/50366 | EN 50366 (2003) | Household and similar electrical appliances. Electromagnetic fields. Methods for evaluation and measurement |
| ECT-EMIS | 12/50366a | EN 50366 (2006) | Household and similar electrical appliances. Electromagnetic fields. Methods for evaluation and measurement |
| ECT-EMIS | 12/50366a1 | EN 50366 (2003), A1 (2006) | Household and similar electrical appliances. Electromagnetic fields. Methods for evaluation and measurement |
| ECT-EMIS | 12/503701 | EN 50370-1 (2005) | Electromagnetic compatibility (EMC) Product Family Standard for Machine Tools Part 1: Emission |
| ECT-EMIS | 12/55012 | CISPR 12 (2001), EN 55012 (2002) & BS EN 55012 (2002) | Vehicles, boats and internal combustion engine driven devices - Radio disturbance characteristics |
| ECT-EMIS | 12/55012a | EN 55012 :2007 | Vehicles, boats and internal combustion engines — Radio disturbance characteristics — Limits and methods of measurement for the protection of off-board receivers |
| ECT-EMIS | 12/55103a | EN 55103-1 (1996) | Electromagnetic compatibility - Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use - Part 1: Emission |
| ECT-EMIS | 12/55103aa | EN 55103-1 (1996); (Radiated Magnetic Field Only) | Electromagnetic compatibility - Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use - Part 1: Emission |
| ECT-EMIS | 12/55103c | BS EN 55103-1 (1997) | Electromagnetic compatibility - Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use - Part 1. Emission |
| ECT-EMIS | 12/60533 | IEC 60533 Ed. 2.0 (1999-11) | Electrical and electronic installations in ships - Electromagnetic compatibility |
| ECT-EMIS | 12/60699a | BS EN 60669-2-1 (2000) | Switches for household and similar fixed electrical installations - Part 2-1: Particular requirements - Electronic switches |
| ECT-EMIS | 12/60699b | EN 60669-2-1/A2 (2001) | Switches for household and similar fixed electrical installations - Part 2-1: Particular requirements - Electronic switches |
| ECT-EMIS | 12/60947a | IEC 60947-4-2 (1999), A1 (2001), A2 (2006) | Low-Voltage switchgear and controlgear - Part 4-2 clause 9.3.5.2: Contactors and motor-starters - AC semiconductor motor controllers and starters. |
| ECT-EMIS | 12/60947b | EN 60947-4-2 (2000), A1 (2002), A2 (2006) | Low-voltage switchgear and controlgear - Part 4-2 clause 9.3.5.2: Contactors and motor-starters - AC semiconductor motor controllers and starters |
| ECT-EMIS | 12/60947c | IEC 60947-5-2 (1997), A1 (1998), A2 (2003) | Low-Voltage switchgear and controlgear - Part 5-2 clause 7.2.6 and 7.2.7: Control circuit devices and switching elements Proximity switches |
| ECT-EMIS | 12/60947d | EN 60974-5-2 (1998), A1 (1999), A2 (2004) | Low-Voltage switchgear and controlgear - Part 5-2 clause 7.2.6 and 7.2.7: Control circuit devices and switching elements Proximity switches |
| ECT-EMIS | 12/60E213 | RTCA DO-160E | Section 21.3, RF Emissions, Conducted |
| ECT-EMIS | 12/60E214 | RTCA DO-160E | Section 21.4, RF Emissions, Radiated |
| ECT-EMIS | 12/60F214 | RTCA DO-160F | Section 21.4, RF Emissions, Conducted |
| ECT-EMIS | 12/60F215 | RTCA DO-160F | Section 21.5, RF Emissions, Radiated |
| ECT-EMIS | 12/610006c | EN 61000-6-3 (2001) and IEC 61000-6-3 (1996) | Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments |
| ECT-EMIS | 12/610006d | EN 61000-6-4 (2001) and IEC 61000-6-4 (1997) | Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments |
| ECT-EMIS | 12/610006e | IEC 61000-6-4, First edition (1997-01) | Electromagnetic compatibility (EMC) - Part 6: Generic standards - Section 4: Emission standard for industrial environments |
| ECT-EMIS | 12/610006k | IEC 61000-6-4 (2006-07) | Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments |
| ECT-EMIS | 12/610006m | EN 61000-6-4 (2007) | Electromagnetic Compatibility (EMC) - Part 6-4: Generic Standards - Emission Standard for Industrial Environments |
| ECT-EMIS | 12/610006p | IEC 61000-6-3 (2006-06) | Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments |
| ECT-EMIS | 12/61000f | EN 61000-6-3 (2001) + A1 (2004) | Electromagnetic compatibility (EMC) - Part 6-3: Generic standard - Emission standard for residential, commericial and light industrial environments |
| ECT-EMIS | 12/61000g | EN 61000-6-3 (2007) | Electromagnetic compatibility (EMC) - Part 6-3: Generic standard - Emission standard for residential, commericial and light industrial environments |
| ECT-EMIS | 12/61000h | AS/NZS 61000-6-3 (2007) | Electromagnetic compatibility (EMC) - Generic standards - Emission standard for residential, commercial and light-industrial environments |
| ECT-EMIS | 12/61131 | IEC 61131-2 (2003) & EN 61131-2 (August 2003) | Programmable controllers, Part 2: Equipment requirements and tests |
| ECT-EMIS | 12/61204a | IEC/EN 61204-3 (2001) | Low-voltage power supplies, d.c. output - Part 3: Electromagnetic compatibility (EMC) |
| ECT-EMIS | 12/61236b5 | IEC 61236-2-2 (2005) | EMC requirements. Particular requirements. Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems |
| ECT-EMIS | 12/61236b7 | IEC 61236-2-3 (2006) | EMC requirements - Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning |
| ECT-EMIS | 12/61326a5 | BS EN 61326-2-2 (2006-06) | EMC requirements. Particular requirements. Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems |
| ECT-EMIS | 12/61326a6 | EN 61326-2-1 (2006-05) | EMC requirements. Particular requirements. Test configurations, operational conditions and performance criteria for EMC unprotected applications |
| ECT-EMIS | 12/61326a7 | EN 61326-2-3 (2006-08) | EMC requirements - Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning |
| ECT-EMIS | 12/61326a8 | IEC 61236-2-1 (2005) | EMC requirements. Particular requirements. Test configurations, operational conditions and performance criteria for EMC unprotected applications |
| ECT-EMIS | 12/61326d | IEC 61326-1 (2005-12) | Electrical equipment for measurement, control and laboratory use - EMC requirements |
| ECT-EMIS | 12/61326e | IEC 61326-1, Edition 1.2 (2000-11) | Electrical equipment for measurement, control and laboratory use - EMC requirements |
| ECT-EMIS | 12/61326k | EN 61326-2-4 (2006) and IEC 61326-2-4 (2006) | Electrical equipment for measurement, control and laboratory use. EMC requirements. Particular requirements. Test configurations, operational conditions and performance criteria for insulation monitoring devices |
| ECT-EMIS | 12/61326m | EN 61326-2-5 (2006) and IEC 61326-2-5 (2006) | Electrical equipment for measurement, control and laboratory use. EMC requirements. Particular requirements . Test configurations, operational conditions and performance criteria for field devices |
| ECT-EMIS | 12/61326n | EN 61326-2-6 (2006) and IEC 61326-2-6 (2005) | Electrical equipment for measurement, control and laboratory use. EMC requirements. Particular requirements. In vitro diagnostic (IVD) medical equipment |
| ECT-EMIS | 12/61800a | EN 61800-3 (1996) + A11 (2000) | Adjustable speed electrical power drive systems - Part 3: EMC product standard including specific test methods |
| ECT-EMIS | 12/61800b | EN 61800-3 (2004) | Adjustable speed electrical power drive systems - Part 3: EMC product standard including specific test methods |
| ECT-EMIS | 12/61967a | IEC 61967, 1st Edition (2002-03) | Integrated Circuits, Measurement of Electromagnetic Emissions, 150 kHz to 1 GHz |
| ECT-EMIS | 12/61967b | IEC 61967-3, Ed. 1.0 (CDV) | Measurement of Radiated Emissions Surface Scan Method |
| ECT-EMIS | 12/61967c | IEC 61967-3, Ed. 1.0 (CDV) | Measurement of Radiated Emissions Surface Scan Method, Annex D.5, Other Analysis Techniques, Low Level Spectrum Detection (LLSD) System |
| ECT-EMIS | 12/62040 | IEC 62040-2 (2005) | Uninterruptible power systems (UPS) - Part 2: Electromagnetic compatibility (EMC) requirements |
| ECT-EMIS | 12/62040c | EN 62040-2:2006 | Uninterruptible power systems (UPS) - Part 2: Electromagnetic compatibility (EMC) requirements |
| ECT-EMIS | Dec-89 | TCVN 7189:2002 (CISPR 22:1997) | Information Technology Equipment-Radio disturbance characteristics-Limits and methods of measurement |
| ECT-EMIS | 12/7637-0 | ISO 7637-0, 1st Edition (1990-08-15) | Road vehicles - Electrical disturbance by conduction and coupling - Part 0: Definitions and general |
| ECT-EMIS | 12/7637-1 | ISO 7637-1, First edition (1990) | Road vehicles - Electrical disturbances from conduction and coupling - Part 1: Passenger cars and light commercial vehicles with nominal 12 V supply voltage - Electrical transient conduction along supply lines only |
| ECT-EMIS | 12/7637-2 | ISO 7637-2, First edition (1990) | Road vehicles - Electrical disturbances from conduction and coupling - Part 2: Commercial vehicles with nominal 24 V supply voltage - Electrical transient conduction along supply lines only |
| ECT-EMIS | 12/7637-3 | ISO 7637-3, 1st Edition (1995-07-15) | Road vehicles - Electrical disturbance by conduction and coupling - Part 3: vehicles with nominal 12 V or 24 V supply voltage - Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines |
| ECT-EMIS | 12/7637a | ISO 7637-1, 2nd Edition (2002-03-15) | Road vehicles - Electrical disturbances from conduction and coupling - Part 1: Definitions and general considerations |
| ECT-EMIS | 12/7637b | ISO 7637-2, Second edition (2004) | Road vehicles - Electrical disturbances from conduction and coupling - Part 2: Electrical transient conduction along supply lines only |
| ECT-EMIS | 12/7637c | ISO 7637-3 (1995) Technical Corrigendum 1 | Road vehicles - Electrical distrubance by conduction and coupling - Part 3: Vehicles with nominal 12 V or 24 V supply voltage - Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines |
| ECT-EMIS | 12/7637d | ISO 7637-3 (2007) | Road vehicles - Electrical disturbance by conduction and coupling - Part 3: vehicles with nominal 12 V or 24 V supply voltage - Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines |
| ECT-EMIS | 12/AS4251a | AS/NZS 4251.1 (1999) | Electromagnetic Compatibility (EMC) - Generic emission standard - Residential, commercial and light industry |
| ECT-EMIS | 12/AS4251b | AS/NZS 4251.2 (1999) | Electromagnetic Compatibility (EMC) - Generic emission standard - Industrial environments |
| ECT-EMIS | 12/C37 | IEEE Std C37.90.1 (2002) | Surge Withstand Capability (SWC) Tests for Relays and Relay Systems Associated with Electric Power Apparatus |
| ECT-EMIS | 12/C37a | IEEE Std C37.90.2 | Standard for withstand capability of relay systems to radiated electromagnetic interference from transceivers design tests |
| ECT-EMIS | 12/C37b | IEEE Std C37.90.3 (2001) | Electrostatic Discharge Tests for Protective Relays |
| ECT-EMIS | 12/C62b | IEEE Std C62.41 Ring Wave (1991) | IEEE Recommended Practice on Surge Voltages in Low-Voltage AC Power Circuits |
| ECT-EMIS | 12/C63.17 | ANSI C63.17-1998 | American National Standard for Methods of Measurement of the Electromagnetic and Operational Compatibility of Unlicensed Personal Communications Services (UPCS) Devices |
| ECT-EMIS | 12/C6317a | ANSI C63.17-1998 | American National Standard for Methods of Measurement of the Electromagnetic and Operational Compatibility of Unlicensed Personal Communications Services (UPCS) Devices |
| ECT-EMIS | 12/C6317b | IEEE C63.17 (2006) | American National Standard Methods of Measurement of the Electromagnetic and Operational Compatibility of Unlicensed Personal Communications Services (UPCS) Devices |
| ECT-EMIS | 12/CIS11 | IEC/CISPR 11 + A1 (1997), EN 55011 (1998), AS/NZS CISPR 11 (2002), and CNS 13803 (1997): Limits and Methods of Measurement of Electromagnetic Disturbance Characteristics of Industrial, Scientific, and Medical Radio-Frequency Equipment | |
| ECT-EMIS | 12/CIS11a | IEC/CISPR 11, edition 3.1 (1999-08) & EN 55011 (1998) | Industrial, scientific and medical (ISM) radio-frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement |
| ECT-EMIS | 12/CIS11aa | IEC/CISPR 11 (2003), EN 55011 (1998) + A1 (1999), AS/NZS CISPR 11 (2002), and CNS 13803 (2003): Limits and Methods of Measurement of Electromagnetic Disturbance Characteristics of Industrial, Scientific, and Medical Radio-Frequency Equipmen | |
| ECT-EMIS | 12/CIS11ab | CNS 13803 (2003) | Limits and methods of measurement of electromagnetic interference characteristics of industrial, scientific an medical (ISM) radio-frequency equipment |
| ECT-EMIS | 12/CIS11b | IEC/CISPR 11(2003) & EN 55011(1998), A1(1999), A2(2002) | Industrial, scientific and medical (ISM) radio-frequency equipment - Radio disturbance characteristics - Limits and methods of measurement |
| ECT-EMIS | 12/CIS11c | IEC/CISPR 11 (1997), A1 (1999), A2 (2002) | Industrial, Scientific and Medical (ISM) radio frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement |
| ECT-EMIS | 12/CIS11d | EN 55011 (1998), A1 (1999), A2 (2002) | Industrial, Scientific and Medical (ISM) radio frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement |
| ECT-EMIS | 12/CIS11e | IEC/CISPR 11 (1990), A1(1999), A2(2002) & EN 55011 (1998) | Industrial, scientific and medical (ISM) radio frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement |
| ECT-EMIS | 12/CIS11f | AS/NZS CISPR 11 (2002) | Industrial, scientific and medical (ISM) radio frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement |
| ECT-EMIS | 12/CIS11g | IEC/CISPR 11, Ed. 4.1 (2004-06) | Industrial, scientific and medical (ISM) radio-frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurements |
| ECT-EMIS | 12/CIS11h | AS/NZS CISPR 11 (2004) | Industrial, scientific and medical (ISM) radio frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement |
| ECT-EMIS | 12/CIS11i | IEC/CISPR 11, Ed. 4.1 (2004-06) + A1(2004) | Industrial, scientific and medical (ISM) radio frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement |
| ECT-EMIS | 12/CIS11ii | IEC/CISPR 11, Ed. 4.1 (2004-06) + A2 (2006) | Industrial, scientific and medical (ISM) radio frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement |
| ECT-EMIS | 12/CIS11j | EN 55011 (1998) + A1(1999), A2(2002) | Industrial, scientific and medical (ISM) radio frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement |
| ECT-EMIS | 12/CIS11jj | EN 55011 (2007) + A2 (2007) | Industrial, scientific and medical (ISM) radio-frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement |
| ECT-EMIS | 12/CIS11k | IEC/CISPR 11 (2003), EN 55011 (1998), A2(2002) | Limits and Methods of Measurement of Electromagnetic Disturbance Characteristics of Industrial, Scientific, and Medical Radio-Frequency Equipment |
| ECT-EMIS | 12/CIS11l | IEC/CISPR 11 (2003), + A1 (2004) | Industrial, scientific, and medical (ISM) radio-frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement |
| ECT-EMIS | 12/CIS11ll | IEC/CISPR 11 (2003), A1 (2004), A2 (2006) | Industrial, scientific, and medical (ISM) radio-frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement |
| ECT-EMIS | 12/CIS11m | EN 55011 (2007) | Industrial, scientific and medical (ISM) radio-frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement |
| ECT-EMIS | 12/CIS11n | CISPR 11 (2003-03) + A2 (2006-06) | Industrial, scientific, and medical (ISM) radio-frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement |
| ECT-EMIS | 12/CIS11p | IEC/CISPR 11 Ed. 5 (2009-05) | Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement |
| ECT-EMIS | 12/CIS12 | CISPR 12 (2001) | Vehicles, boats and internal combustion engine driven devices - Radio disturbance characteristics |
| ECT-EMIS | 12/CIS12a | IEC/CISPR 12, Edition 5.1 (2005-04) and EN 55012 (2002), A1 | Vehicles, boats and internal combustion engine driven devices - Radio disturbance characteristics |
| ECT-EMIS | 12/CIS12b | AS/NZS CISPR 12 (2006) | Vehicles, boats and internal combustion engine driven devices - Radio disturbance characteristics |
| ECT-EMIS | 12/CIS12c | CISPR 12 (2005), A1 (2005), A2 (2005) | Vehicles, boats and internal combustion engine driven devices - Radio disturbance characteristics |
| ECT-EMIS | 12/CIS12d | CISPR 12 (2007) | Vehicles, boats and internal combustion engine driven devices - Radio disturbance characteristics |
| ECT-EMIS | 12/CIS13 | IEC/CISPR 13 (2001-04), EN 55013 (2001), AS/NZS CISPR 13 (2003), and CNS 13439 (2001): Sound and television broadcast receivers and associated equipment - Radio disturbance characteristics - Limits and methods of measurement | |
| ECT-EMIS | 12/CIS13a | IEC/CISPR 13, Ed. 4.1 (2003) | Sound and television broadcast receivers and associated equipment - Radio disturbance characteristics - Limits and methods of measurement |
| ECT-EMIS | 12/CIS13aa | CISPR 13, Edition 4.2 (2006-03) | Sound and broadcast receivers and associated equipment - Radio disturbance characteristics - Limits and methods of measurement |
| ECT-EMIS | 12/CIS13b | EN 55013 (2001) + A1 (2003) | Sound and television broadcast receivers and associated equipment - Radio disturbance characteristics - Limits and methods of measurement |
| ECT-EMIS | 12/CIS13bb | EN 55013 (2001) + A1 (2003) + A2 (2006) | Sound and television broadcast receivers and associated equipment - Radio disturbance characteristics - Limits and methods of measurement |
| ECT-EMIS | 12/CIS13c | CISPR 13 (2003) + Amdt 1(2003) & AS/NZS CISPR 13 (2004) | Sound and television broadcast receivers and associated equipment - Radio disturbance characteristics - Limits and methods of measurement |
| ECT-EMIS | 12/CIS13d | IEC/CISPR 13 (2001-04) + A1 (2003) | Sound and broadcast receivers and associated equipment - Radio disturbance characteristics - Limits and methods of measurement |
| ECT-EMIS | 12/CIS13e | CNS 13439 (1997) | Sound and television broadcast receivers and associated equipment - Radio disturbance characteristics - Limits and methods of measurement |
| ECT-EMIS | 12/CIS13f | AS/NZS CISPR 13 (2004) | Sound and television broadcast receivers and associated equipment - Radio disturbance characteristics - Limits and methods of measurement |
| ECT-EMIS | 12/CIS14 | CISPR 14-1 (March 30, 2000) | Limits and Methods of Measurement of Radio interference Characteristics of Household Electrical Appliances, Portable Tools and Similiar Electrical Apparatus - Part 1: Emissions |
| ECT-EMIS | 12/CIS14a | EN 55014-1 (1993), A1 (1997), A2 (1999) | |
| ECT-EMIS | 12/CIS14a1 | EN 55014-1 (1998), A1 (1999), A2 (2001) | Electromagnetic Compatibility - Requirements for household applicances, electric tools and similar apparatus - Part 1: Emission |
| ECT-EMIS | 12/CIS14a2 | BS EN 55014-1 (2001) with A1 and A2 | Electromagnetic compatibility - Requriements for household appliances, electric tools and similar apparatus - Part 1: Emission |
| ECT-EMIS | 12/CIS14a3 | EN 55014-1 (2000) with Amendments A1(2001) & A2 (2001) | Electromagnetic Compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission |
| ECT-EMIS | 12/CIS14a4 | EN 55014-1 (2006) | Electromagnetic Compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission |
| ECT-EMIS | 12/CIS14b | AS/NZS 1044 (1995) | |
| ECT-EMIS | 12/CIS14b1 | AS/NZS CISPR 14-1 (2003) | Electromagnetic Compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission |
| ECT-EMIS | 12/CIS14b2 | AS/NZS CISPR 14-1 (2000) | Electromagnetic Compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission |
| ECT-EMIS | 12/CIS14c | CNS 13783-1 | Electromagnetic Compatibility Requirements for household appliances, electric tools and similar apparatus - Part 1: Emissions |
| ECT-EMIS | 12/CIS14d | IEC/CISPR 14-1 (2001) and A1 (2001) | Electromagnetic Compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emissions |
| ECT-EMIS | 12/CIS14e | EN 55014-1 (2001) and A1 (2001) | Electromagnetic Compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission |
| ECT-EMIS | 12/CIS14f | AS/NZS 1044 (2001) and A1 (2001) | Electromagnetic Compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission |
| ECT-EMIS | 12/CIS14g | CNS 13783-1 (2001) and A1 (2001) | Electromagnetic Compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission |
| ECT-EMIS | 12/CIS14gg | CNS 13783-1 (2004) | Electromagnetic Compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission |
| ECT-EMIS | 12/CIS14h | AS/NZS CISPR 14.1 (2003) | Electromagnetic Compatibility - Requirements for household appliances, electric tools and similar apparatus - Emission |
| ECT-EMIS | 12/CIS14m | GB4343.1 (2003) | Electromagnetic Compatibility - Requirements for household applicances, electric tools and similar apparatus - Part 1: Emission |
| ECT-EMIS | 12/CIS14x | IEC/CISPR 14-1, Ed. 4 (2003) | Electromagnetic Compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission |
| ECT-EMIS | 12/CIS14x1 | IEC/CISPR 14-1, Ed. 5.0 (2005) | Electromagnetic Compatibility - Requirements for Household Appliances, Electric Tools and Similar Apparatus - Part 1: Emission |
| ECT-EMIS | 12/CIS14y | IEC/CISPR 14-1, Edition 4.2 (2002-10) | Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission |
| ECT-EMIS | 12/CIS14z | IEC/CISPR 14-1 (2000), A1 (2001), A2 (2002) | Electromagnetic Compatibility - Requrements for household appliances, electric tools and similar apparatus - Part 1: Emission |
| ECT-EMIS | 12/CIS15 | IEC/CISPR 15 (2000) + A1 (2001) | Limits and methods of measurements of radio disturbance characteristics of electrical lighting and similar equipment |
| ECT-EMIS | 12/CIS15a | AS/NZS CISPR 15 (2002) | Limits and methods of measurements of radio disturbance characteristics of electrical lighting and similar equipment |
| ECT-EMIS | 12/CIS15a1 | AS/NZS CISPR 15 (2006) | Limits and methods of measurements of radio disturbance characteristics of electrical lighting and similar equipment |
| ECT-EMIS | 12/CIS15aa | CISPR 15 (2005-11) | Limits and methods of measurements of radio disturbance characteristics of electrical lighting and similar equipment |
| ECT-EMIS | 12/CIS15ab | IEC/CISPR 15 (200), A1 (2001), A2 (2002) | Limits and methods of measurements of radio disturbance characteristics of electrical lighting and similar equipment |
| ECT-EMIS | 12/CIS15b | CNS 13439 (2000) + A1 (2001) | Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment |
| ECT-EMIS | 12/CIS15bb | CNS 13439 (2006) | Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment |
| ECT-EMIS | 12/CIS15bc | CNS 13439 (2004) | Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment |
| ECT-EMIS | 12/CIS15c | EN 55015 (2000) + A1 (2001) | Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment |
| ECT-EMIS | 12/CIS15cc | EN 55015 (2006) | Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment |
| ECT-EMIS | 12/CIS15d | IEC/CISPR 15 (2000-08) 6th edition, EN 55015 (2000), AS/NZS 4051 (2000), and CNS 14115 (2000): Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment | |
| ECT-EMIS | 12/CIS15e | CISPR 15 (2002) & EN 55015, A1(1997), A2(1999) | Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment |
| ECT-EMIS | 12/CIS15f | EN 55015 (2000) + A1(2001), A2(2002) | Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment |
| ECT-EMIS | 12/CIS15g | CNS 14115 (2004) | Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment |
| ECT-EMIS | 12/CIS15h | CNS 14115 (1998) | Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment |
| ECT-EMIS | 12/CIS22 | IEC/CISPR 22 (1997) & EN 55022 (1998) + A1(2000) | Limits and methods of measurement of radio disturbance characteristics of information technology equipment |
| ECT-EMIS | 12/CIS22L | EN 55022 (2006) + A1 (2007) | Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement |
| ECT-EMIS | 12/CIS22a | IEC/CISPR 22 (1993) and EN 55022 (1994) | Limits and methods of measurement of radio disturbance characteristics of information technology equipment, Amendment 1 (1995) and Amendment 2 (1996) |
| ECT-EMIS | 12/CIS22a1 | IEC/CISPR 22 (1997) A1(2002); EN55022(1998)A1(2000),A2(2003) | Limits and methods of measurement of radio disturbance characteristics of information technology equipment |
| ECT-EMIS | 12/CIS22a2 | IEC/CISPR 22 (1997), A1(2000), A1(2002) | Limits and Methods of Measurement of Radio Disturbance Characteristics of Information Technology Equipment |
| ECT-EMIS | 12/CIS22a3 | EN 55022 (1998), A1(2000), A2(2003) | Limits and Methods of Measurement of Radio Disturbance Characteristics of Information Technology Equipment |
| ECT-EMIS | 12/CIS22a4 | IEC/CISPR 22 (1993) & EN 55022 (1994)+A1(1995), A2(1997) | Limits and methods of measurement of radio disturbance characteristics of information technology equipment |
| ECT-EMIS | 12/CIS22a5 | EN 55022 (1994)+A1(1995), A2(1997) | Limits and methods of measurement of radio disturbance characteristics of information technology equipment |
| ECT-EMIS | 12/CIS22b | CNS 13438 (1997) | Limits and Methods of Measurement of Radio Interference Characteristics of Information Technology Equipment |
| ECT-EMIS | 12/CIS22c | IEC/CISPR 22, Fourth Edition (2003-04) & EN 55022 (1998) | Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement |
| ECT-EMIS | 12/CIS22c1 | IEC/CISPR 22, Edition 5 (2005) and EN 55022 (1998) | Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement |
| ECT-EMIS | 12/CIS22c2 | IEC/CISPR 22 (2003) + Amdt 1 (2004-10) | Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement |
| ECT-EMIS | 12/CIS22c3 | IEC/CISPR 22, Edition 5 (2005) + A1(2005) | Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement |
| ECT-EMIS | 12/CIS22c4 | EN 55022 (1998) + A1(2000) + A2(2003) | Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement |
| ECT-EMIS | 12/CIS22c5 | IEC/CISPR 22, Edition 5 (2005) + A1(2005) + A2 (2006) | Information Technology Equipment - Radio Disturbance Characteristics - Limits and Methods of Measurement |
| ECT-EMIS | 12/CIS22d | IEC/CISPR 22 (2001); EN 55022 (2001) | Limits and Methods of Measurement of Radio Disturbance Characteristics of Information Technology Equipment |
| ECT-EMIS | 12/CIS22e | IEC/CISPR 22 (2002) and EN 55022 (1998) | Limits and Methods of Measurement of Radio Disturbance Characteristics of Information Technology Equipment |
| ECT-EMIS | 12/CIS22f | CNS 13438 (2006) | LImits and Methods of Measurement of Radio Interference Characteristics of Information Technology Equipment |
| ECT-EMIS | 12/CIS22g | IEC/CISPR 22, Edition 5 (2005-04) and EN 55022 (2006) | Limits and Methods of Measurement of Radio Disturbance Characteristics of Information Technology Equipment |
| ECT-EMIS | 12/CIS22g1 | IEC/CISPR 22, Edition 5 (2005-04) and EN 55022 (2006) | Limits and Methods of Measurement of Radio Disturbance Characteristics of Information Technology Equipment (excluding measurements at Telecommunication Ports) |
| ECT-EMIS | 12/CIS22h | IEC/CISPR 22 (2005) + A2 (2006) | Limits and Methods of Measurement of Radio Disturbance Characteristics of Information Technology Equipment |
| ECT-EMIS | 12/CIS22i | IEC/CISPR 22, Edition 5.2 (2006-03) | Limits and Methods of Measurement of Radio Disturbance Characteristics of Information Technology Equipment |
| ECT-EMIS | 12/CIS22j | EN 55022 (2006) | Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement |
| ECT-EMIS | 12/CIS22j1 | EN 55022 (2006) + A1 (2007) | Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement |
| ECT-EMIS | 12/CIS22k | IEC/CISPR 22 (2008-09) | Limits and Methods of Measurement of Radio Disturbance Characteristics of Information Technology Equipment |
| ECT-EMIS | 12/CIS22m | EN 55015 (2006) + A1(2007) | Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment |
| ECT-EMIS | 12/CIS24f | IEC/CISPR 24 (1997), A1 (2001), A2 (2002) and EN 55024 (1998 | Information technology equipment - Immunity characteristics - Limits and methods of measurement |
| ECT-EMIS | 12/CIS25 | IEC/CISPR 25, Ed. 1 (1995-09) | Limits and methods of measurement of radio disturbance characteristics for the protection of receivers used on board vehicles |
| ECT-EMIS | 12/CIS25a | EN 55025 (2003) and IEC/CISPR 25 (2002) | Limits and methods of measurement of radio disturbance characteristics for the protection of receivers used on board vehicles |
| ECT-EMIS | 12/CIS25b | IEC/CISPR 25, 2nd ed. (2002-08) | Radio disturbance characteristics for the protection of receivers used on board vehicles, boats, and on devices – Limits and methods of measurement: Sections 6.2, 6.3, 6.4, & 6.5 |
| ECT-EMIS | 12/CIS25b1 | IEC/CISPR 25, 2nd ed. (2002-08) | Radio disturbance characteristics for the protection of receivers used on board vehicles, boats, and on devices – Limits and methods of measurement: Sections 6.2, 6.3, 6.4, & 6.5 (Excluding TEM Cell Method) |
| ECT-EMIS | 12/CNS757 | CNS 14757-2 (1992-07) | Uninterruptible power systems (UPS) - Part 2: Electromagnetic Compatibility (EMC) requirements |
| ECT-EMIS | 12/DCE01 | DEF-STAN 59-41 Part 3, DCE01 (1995-10) | Conducted Emission on Primary Power Lines |
| ECT-EMIS | 12/DCE02 | DEF-STAN 59-41 Part 3, DCE02 (1995-10) | Conducted Emission on Control Signal and Power Lines |
| ECT-EMIS | 12/DCE03 | DEF-STAN 59-41 Part 3, DCE03 (1995-10) | Exported Transients Power Lines |
| ECT-EMIS | 12/DCS01 | DEF-STAN 59-41 Part 3, DCS01 (1995-10) | Conducted Susceptibility, Primary Power Lines |
| ECT-EMIS | 12/DCS02 | DEF-STAN 59-41 Part 3, DCS02 (1995-10) | Conducted Susceptibility, Primary Control and Signal Lines |
| ECT-EMIS | 12/DCS03 | DEF-STAN 59-41 Part 3, DCS03 (1995-10) | Conducted Susceptibility, Control and Signal Lines |
| ECT-EMIS | 12/DCS04 | DEF-STAN 59-41 Part 3, DCS04 (1995-10) | Imported Transient Susceptibility |
| ECT-EMIS | 12/DCS05 | DEF-STAN 59-41 Part 3, DCS05 (1995-10) | Enternally Generated Transients |
| ECT-EMIS | 12/DCS06 | DEF-STAN 59-41 Part 3, DCS06 (1995-10) | Imported Long Transients Susceptibility AC/DC Systems |
| ECT-EMIS | 12/DCS07 | DEF-STAN 59-41 Part 3, DCS07 (1995-10) | Imported Short Transient Susceptibility (Land Service) |
| ECT-EMIS | 12/DCS08 | DEF-STAN 59-41 Part 3, DCS08 (1995-10) | Externally Generated Transients (Aircraft) |
| ECT-EMIS | 12/DCS09 | DEF-STAN 59-41 Part 3, DCS09 (1995-10) | Imported Lightning Transients Susceptibility (Aircraft) |
| ECT-EMIS | 12/DCS10 | DEF-STAN 59-41 Part 3, DCS10 (1995-10) | Electrostatic Discharge (Aircraft) |
| ECT-EMIS | 12/DCS11 | DEF-STAN 59-41 Part 3, DCS11 (1995-10) | Imported Long Transient Susceptibility - Power Lines (Sea Systems) |
| ECT-EMIS | 12/DCS12 | DEF-STAN 59-41 Part 3, DCS12 (1995-10) | Low Frequency Transient Susceptibility - Power Lines (Sea Systems) |
| ECT-EMIS | 12/DMFS01 | DEF-STAN 59-41 Part 3, DMFS01 (1995-10) | Magnetostatic Field Susceptibility |
| ECT-EMIS | 12/DRE01 | DEF-STAN 59-41 Part 3, DRE01 (1995-10) | Radiated Emissions E Field |
| ECT-EMIS | 12/DRE02 | DEF-STAN 59-41 Part 3, DRE02 (1995-10) | H Field Radiation |
| ECT-EMIS | 12/DRE03 | DEF-STAN 59-41 Part 3, DRE03 (1995-10) | Radiated Emissions Installed Antenna |
| ECT-EMIS | 12/DRS01 | DEF-STAN 59-41 Part 3, DRS01 (1995-10) | H Field Susceptibility |
| ECT-EMIS | 12/DRS02 | DEF-STAN 59-41 Part 3, DRS02 (1995-10) | E Field Susceptibility |
| ECT-EMIS | 12/EM01 | EN 50081-1 (1992) | Electromagnetic compatibility - Generic emission standard - Part 1: Residential, commercial and light industry |
| ECT-EMIS | 12/EM02 | EN 61000-3-2(1995), A1 & A2 (1998), A14(2000) | Electromagnetic compatibility (EMC) - Part 3: Limits - Section 2. Limits for harmonic current emissions (equipment input current <= 16A per phase) |
| ECT-EMIS | 12/EM02a | IEC 61000-3-2, Edition 2.1 (2001-10), EN 61000-3-2 (2000), and AS/NZS 2279.1 (2000): Electromagnetic compatibility (EMC) Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <= 16 A) | |
| ECT-EMIS | 12/EM02aa | EN 61000-3-2 (2000) + A2 (2005) | Electromagnetic compatibility (EMC) - Part 3: Limits - Section 2. Limits for harmonic current emissions (equipment input current <= 16A per phase) |
| ECT-EMIS | 12/EM02ab | EN 61000-3-2 (2001), A2 (2005) | Electromagnetic compatibility (EMC) - Part 3: Limits - Section 2. Limits for harmonic current emissions (equipment input current <= 16A per phase) |
| ECT-EMIS | 12/EM02b | IEC 61000-3-2, Second Edition (2000-08) | Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current<= 16 A per phase) |
| ECT-EMIS | 12/EM02bb | EN 61000-3-2, Ed. 2 (2001); IEC 61000-3-2, Ed. 2.1 (2001) | Electromagnetic compatibility (EMC) Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <= 16 A) |
| ECT-EMIS | 12/EM02c | BS EN 61000-3-2, Ed. 2 (2001); IEC 61000-3-2, Ed. 2 (2000) | Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current up to and including 16 A per phase) |
| ECT-EMIS | 12/EM02d | IEC 61000-3-2, Edition 2.2 (2004-11) | Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <= 16 A per phase) |
| ECT-EMIS | 12/EM02e | AS/NZS 61000.3.2 (2003) | Electromagnetic compatibility (EMC) - Limits - Limits for harmonic current emissions (equipment current <= 16 A per phase) |
| ECT-EMIS | 12/EM02ee | AS/NZS 61000-3-2 (2007) | Electromagnetic compatibility (EMC) - Limits - Limits for harmonic current emissions (equipment input current (16 A per phase) (IEC 61000-3-2, Ed. 3.0 (2005) MOD) |
| ECT-EMIS | 12/EM02f | IEC 61000-3-2 (2000) + Amdt 2 (2004-10) | Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <=16 A per phase) |
| ECT-EMIS | 12/EM02ff | IEC 61000-3-2 (2000) + A1 (2001) + A2 (2004) | Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <=16 A per phase) |
| ECT-EMIS | 12/EM02g | IEC 61000-3-2, Edition 3.0 (2005-11), EN 61000-3-2 (2000), and AS/NZS 2279.1 (2000): Electromagnetic Compatibility (EMC) Part 3-2: Limits - Limits for Harmonic Current Emissions (Equipment Input Current <= 16A) | |
| ECT-EMIS | 12/EM02h | JIS C 61000-3-2:2005 | Electromagnetic Compatibility (EMC) - Part 3-2: Limits - Limits for Harmonic Current Emissions (Equipment Input Current <= 20 A per Phase) |
| ECT-EMIS | 12/EM02i | IEC 61000-3-2, Ed. 3.0 (2005-11) | Electromagnetic compatability (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <=16 A per phase) |
| ECT-EMIS | 12/EM02j | EN 61000-3-2 (2006) | Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current up to and including 16 A per phase) |
| ECT-EMIS | 12/EM02k | GB 17625.1 (2003) | Electromagnetic compatibility (EMC) - Part 3: Limits - Section 2. Limits for harmonic current emissions (equipment input current <= 16A per phase) |
| ECT-EMIS | 12/EM03 | IEC 61000-3-3(1995); EN 61000-3-3(1995); AS/NZS 2279.3(1995) | EMC - Part 3: Limits - Section 3. Limitation of voltage fluctuations and flicker in low-voltage supply systems for equipment with rated current up to 16A |
| ECT-EMIS | 12/EM03a | IEC 1000-3-3 (1994-12) | |
| ECT-EMIS | 12/EM03b | IEC 61000-3-3, Edition 1.1(2002-03) & EN 61000-3-3, A1(2001) | EMC - Part 3-3: Limits - Limitations of voltage changes, voltage flucuations and flicker, in public low-voltage supply-systems, for equipment with rated current <=16 A per phase and not subject to conditional connections |
| ECT-EMIS | 12/EM03c | IEC/EN 61000-3-3 (1994) with Amendment 1 (2001) | Conducted Emissions, Voltage Flicker |
| ECT-EMIS | 12/EM03c1 | IEC 61000-3-3 (1994) with A1 (2001), A2 (2005) | Electromagnetic compatibility - Limits - Limitations of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems for equipment with rated current <= 16 A per phase and not subject to conditional connections |
| ECT-EMIS | 12/EM03d | IEC/EN 61000-3-3 (1995) + A1 (2001) | Conducted Emissions, Voltage Flicker |
| ECT-EMIS | 12/EM03e | BS EN 61000-3-3 (1995) & IEC 61000-3-3 (1994)+A1 & A2 | EMC - Part 3: Limits - Section 3: Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection |
| ECT-EMIS | 12/EM03f | AS/NZS 61000.3.3 (2003) | Electromagnetic compatibility - Limits - Limitations of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems for equipment with rated current <= 16 A per phase and not subject to conditional connections |
| ECT-EMIS | 12/EM03ff | AS/NZS 61000-3-3 (2006) | Electromagnetic compatibility - Limits - Limitations of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems for equipment with rated current <= 16 A per phase and not subject to conditional connections |
| ECT-EMIS | 12/EM03g | IEC 61000-3-3, Edition 1.1 (2003) +A2 (2005) | EMC Part 3-3: Limits - Limitations of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connections |
| ECT-EMIS | 12/EM03h | IEC/EN 61000-3-3 (1995) + A1 (2001) + A2 (2005) | Conducted Emissions, Voltage Flicker |
| ECT-EMIS | 12/EM03i | IEC 61000-3-3 (2005), EN 61000-3-3 (1995) + A2 (2005) | EMC - Part 3-3: Limits - Limitations of voltage changes, voltage flucuations and flicker, in public low-voltage supply-systems, for equipment with rated current <=16 A per phase and not subject to conditional connections |
| ECT-EMIS | 12/EM03ii | IEC 61000-3-3, Edition 1.2 (2005-10) | EMC- Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low- voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection |
| ECT-EMIS | 12/EM03j | AS/NZS 2279.3 (2001) | EMC - Part 3-3: Limits - Limitations of voltage changes, voltage flucuations and flicker, in public low-voltage supply-systems, for equipment with rated current <=16 A per phase and not subject to conditional connections |
| ECT-EMIS | 12/EM03m | EN 61000-3-3, Ed. 2.0 (2008-09) | EMC- Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low- voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection |
| ECT-EMIS | 12/EM03n | IEC 61000-3-3 Ed. 2.0 (2008) | EMC- Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current =16 A per phase and not subject to conditional connection |
| ECT-EMIS | 12/EM11 | IEC 61000-3-11, 1st edition (2000-08) | EMC - Part 3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems -Equipment with rated current <=75A and subject to conditional connection |
| ECT-EMIS | 12/EM11a | AS/NZS 61000-3-11 | EMC - Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current less than or equal to 75 A and subject to conditional connection |
| ECT-EMIS | 12/EM11en | EN 61000-3-11, 1st Ed (2000-08) | EMC - Part 3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems -Equipment with rated current <=75A and subject to conditional connection |
| ECT-EMIS | 12/EM12 | IEC 61000-3-12, Rev 04, November 2004 | Electromagnetic Compatibility (EMC) - PART 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current greater than 16 A and less than or equal to 75 A |
| ECT-EMIS | 12/EM12a | IEC 61000-3-12 (2004) & EN 61000-3-12 (2005) | Electromagnetic Compatibility (EMC) - PART 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current greater than 16 A and less than or equal to 75 A |
| ECT-EMIS | 12/EM12b | AS/NZS 61000-3-12 (2006) | Electromagnetic compatibility (EMC) - Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16 A and <=75 A per phase |
| ECT-EMIS | 12/EM9254 | GB9254-1998 | Information Technology Equipment -Radio Disturbance Characteristics-Limits and Methods of Measurement |
| ECT-EMIS | 12/EN11 | EN 61000-3-11, Rev 01, Feb 2001 | Electromagnetic Compatibility (EMC) Limits, Limitation of Voltage Changes, Voltage Fluctuations and Flicker in public low-voltage supply systems - Equipment with rated voltage current < 75 A and subject to conditional connection |
| ECT-EMIS | 12/EN81b | EN 50081-2 (1994) | Electromagnetic compatibility - Generic emission standard - Part 2. Industrial environment |
| ECT-EMIS | 12/F18 | FCC OST/MP-5 (1986) | FCC Methods of Measurement of Radio Noise Emissions for ISM Equipment (cited in FCC Method 47 CFR Part 18 - Industrial, Scientific, and Medical Equipment) |
| ECT-EMIS | 12/FCC11 | ANSI C63.4 (2003) with FCC Method - 47 CFR Part 11 | Emergency Alert System (EAS) |
| ECT-EMIS | 12/FCC15b | ANSI C63.4 (2003) with FCC Method 47 CFR Part 15, Subpart B | Unintentional Radiators |
| ECT-EMIS | 12/FCC15bc | ANSI C63.4 (2003) with FCC Method 47 CFR Part 15, Subpart B | Unintentional Radiators - Conducted emissions only |
| ECT-EMIS | 12/FCC15c | ANSI C63.4 (2003) with FCC Method 47 CFR Part 15, Subpart C | Intentional Radiators |
| ECT-EMIS | 12/FCC15c1 | ANSI C63.4 (2003) and Millimeter Wave Test Procedures | IDB 20040420-001 with FCC Method - 47 CFR Part 15, Subpart C: Intentional Radiators |
| ECT-EMIS | 12/FCC15c2 | DA 00-705 - March 30, 2000 and KDB Pub. No. 558074 | with FCC Method - 47 CFR Part 15, Subpart C: Intentional Radiators - (Filing and Measurement Guidelines for Frequency Hopping Spread Spectrum Systems - and - New Guidance on Measurements for Digital Transmission Systems in Section 15.247) |
| ECT-EMIS | 12/FCC15c3 | KDB Pub. No. 200433 Millimeter Wave Test Procedures | with FCC Method - 47 CFR Part 15, Subpart C: Intentional Radiators |
| ECT-EMIS | 12/FCC15cz | SS - MP with FCC Method - 15 CFR Part 15, Subpart C | Intentional Radiators |
| ECT-EMIS | 12/FCC15d | ANSI C63.17(1998) and ANSI C63.4 (2003) | with FCC Method - 47 CFR Part 15, Subpart D: Unlicensed Personal Communications Service Devices |
| ECT-EMIS | 12/FCC15e | ANSI C63.4 (2003) with FCC Method 47 CFR Part 15, Subpart E | Unlicensed National Information Infrastructure Service Devices |
| ECT-EMIS | 12/FCC15e1 | ANSI C63.4 (2003) and DA 02-2138 | with FCC Method - CFR Part 15, Subpart E: Unlicensed National Information Infrastructure Service Devices - and - Measurement Procedure Update for Peak Transmit Power |
| ECT-EMIS | 12/FCC15ez | UNII - MP with FCC Method - 47 CFR Part 15, Subpart E | Unlicensed National Information Infrastructure Services Devices |
| ECT-EMIS | 12/FCC15f | FCC Report and Order ET Docket 98-153 (FCC 02-48) | and procedures in IDB 20021108-001 with FCC Method 47 CFR Part 15, Subpart F: Ultra-Wideband Operation |
| ECT-EMIS | 12/FCC15g | FCC Part 15.G using FCC Order 04-425 | FCC Part 15 Subpart G Access Broadband Over Power Line (Access BPL) using FCC Order, ET Docket No. 04-37, FCC 04-245, Measurement Guidelines for Access Broadband over Power Line (BPL) Systems. |
| ECT-EMIS | 12/FORD01 | Ford ES-XW7T-1A278-AA | |
| ECT-EMIS | 12/GOSTR | GOST R 51318.14-99 | Electromagnetic Compatibility of Technical Equipment. Radio Disturbance from Household Appliances, Electric Tools and Similar Apparatus-Part 1: Emissions |
| ECT-EMIS | 12/ICES001 | ICES-001 | Industrial, Scientific and Medical (ISM) Radio Frequency Generators |
| ECT-EMIS | 12/ICES003 | ICES-003 Issue 4 (2004) | Implementation and Interpretation of the Interference-Causing Equipment Standard for Digital Apparatus. (Industry Canada) |
| ECT-EMIS | 12/ICES005 | ICES-005 Issue 5 (November 1, 1998) | Radio Frequency Lighting Devices. |
| ECT-EMIS | 12/ICES1a | ICES-001 Issue 4 (2006) | Industrial, Scientific and Medical (ISM) Radio Frequency Generators |
| ECT-EMIS | 12/IE3187a | IEEE Std 187 (2003) | IEEE Standard for Measurement Methods of Emissions from FM and Television Broadcast Receivers in the Frequency Range of 9 kHz to 40 GHz |
| ECT-EMIS | 12/IEE299 | IEEE Std. 299 (1969) | Recommended Practice for Measurement of Shielding Effectiveness of High-Performance Shielding Enclosures |
| ECT-EMIS | 12/IEE299b | IEEE Std 299 (1997) | Measuring the Effectiveness of Electromagnetic Shielding Enclosures-Description |
| ECT-EMIS | 12/IEEE139 | IEEE Std 139-1988 | IEEE Recommended Practice for the Measurement of Radio Frequency Emission from Industrial, Scientific, and Medical (ISM) Equipment Installed on User's Premises |
| ECT-EMIS | 12/IEEE149 | IEEE Std 149 (1979) | IEEE Standard Test Procedure for Antennas |
| ECT-EMIS | 12/IEEE187 | IEEE Std 187 (1990) | IEEE Standard on Radio Receivers: Open Field Method of Measurement of Spurious Radiation from FM and Television Broadcast Receivers |
| ECT-EMIS | 12/IEEE213 | IEEE Std 213 (1987) | IEEE Standard Procedure for Measuring Conducted Emissions in the Range of 300 kHz to 25 MHz from Television and FM Broadcast Receivers to Power Lines |
| ECT-EMIS | 12/JIS1806 | JIS C 1806-1 (2001) | Electrical equipment for measurement, control and laboratory use - EMC requirements |
| ECT-EMIS | 12/KCC0839 | KCC Notice 2008-39 | Korea Technical Requirements Electromagnetic Interference (EMI) |
| ECT-EMIS | 12/KCC133 | KCC Public Notification 2008-133, K only (Dec. 29, 2008) | Notice on type ofical approval, type registration and EMC registracion of broadcasing and communications equipment |
| ECT-EMIS | 12/KN11b | KN11 (Annex 3) with RRL Notice No. 2006-126 (Dec. 29, 2006) | Technical Requirements for Electromagnetic Interference; With KN 11 (Annex 3) |
| ECT-EMIS | 12/KN11c | KN11 (Annex 3) with RRL Notice No. 2006-128 (Dec. 29, 2006) | Conformity Assessment Procedure for Electromagnetic Interference; With KN 11 (Annex 3) |
| ECT-EMIS | 12/KN11d | KN11 (2008-5) with RRL Notice No. 2008-3 (May 20, 2008) | Conformity Assessment Procedure for Electromagnetic Interference; With KN 11 |
| ECT-EMIS | 12/KN11d1 | KN11 (Annex 3) with RRA Announce 2008-11 (Dec. 16, 2008) | Conformity Assessment Procedure for Electromagnetic Interference; With KN 11 (Annex 3) |
| ECT-EMIS | 12/KN13 | KN13 with RRL Notice No. 2004-69 (Sept. 22, 2004) | Sound and television broadcast receivers and associated equipment - Radio disturbance characteristics - Limits and methods of measurement |
| ECT-EMIS | 12/KN13a | KN13 (Annex 4) with RRL Notice No. 2007-100 (Dec. 26, 2007) | Sound and television broadcast receivers and associated equipment - Radio disturbance characteristics - Limits and methods of measurement |
| ECT-EMIS | 12/KN13b | KN13 with RRL Notice No. 2008-3 (May 20, 2008) | Sound and television broadcast receivers and associated equipment - Radio disturbance characteristics - Limits and methods of measurement |
| ECT-EMIS | 12/KN14 | KN14 with RRL Notice No. 2004-69 (Sept. 22, 2004) | Electromagnetic Compatibility - Requirements for household appliances, electric tools and similar apparatus - Emission |
| ECT-EMIS | 12/KN14a | KN14 (Annex 5) with RRL Notice No. 2007-100 (Dec. 26, 2007) | Electromagnetic Compatibility - Requirements for household appliances, electric tools and similar apparatus - Emission |
| ECT-EMIS | 12/KN14b | KN 14-1 (2008-5) with RRL Notice No. 2008-3 (May 20, 2008) | Electromagnetic Compatibility - Requirements for household appliances, electric tools and similar apparatus - Emission |
| ECT-EMIS | 12/KN15 | KN15 with RRL Notice No. 2004-69 (Sept. 22, 2004) | Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment |
| ECT-EMIS | 12/KN16 | Korea RRA Notice No. 2008-11 (Dec. 16, 2008) | Conformity Assessment Procedures for Electromagnetic Interference using KN 16-1-1, KN 16-1-2, KN 16-1-3, KN 16-1-4, KN 16-1-5, KN 16-2-1, KN 16-2-2, KN 16-2-3, KN 16-2-4 (2008-05) |
| ECT-EMIS | 12/KN22 | KN22 with RRL Notice No. 2005-82 (Sept. 29, 2005) | RRL Notice No. 2005-82: Technical Requirements for Electromagnetic Interference Annex 8 (KN-22), RRL Notice No. 2005-131: Conformity Assessment Procedures for Electromagnetic Interference |
| ECT-EMIS | 12/KN22a | KN22 (Annex 8) with RRL Notice No. 2006-128 (Dec. 29, 2006) | Conformity Assessment Procedure for Electromagnetic Interference; With KN 22 (Annex 8) |
| ECT-EMIS | 12/KN22b | KN22 (Annex 8) with RRL Notice No. 2006-126 (Dec. 29, 2006) | Technical Requirements for Electromagnetic Interference; With KN22 (Annex 8) |
| ECT-EMIS | 12/KN22c | KN22 (Annex 8) with RRL Notice No. 2007-100 (Dec. 26, 2007) | Conformity Assessment Procedure for Electromagnetic Interference; With KN 22 (Annex 8) |
| ECT-EMIS | 12/KN22d | KN22 (Annex 8) with RRL Notice No. 2008-04 (Feb. 11, 2008) | Conformity Assessment Procedure for Electromagnetic Interference; With KN 22 (Annex 8) |
| ECT-EMIS | 12/KN22d1 | KN22 (Annex 8) with RRA Announce 2008-11 (Dec. 16, 2008) | Conformity Assessment Procedure for Electromagnetic Interference; With KN 22 (Annex 8) |
| ECT-EMIS | 12/KN22e | KN22 (2008-5) with RRL Notice No. 2008-3 (May 20, 2008) | Conformity Assessment Procedure for Electromagnetic Interference; With KN 22 |
| ECT-EMIS | 12/KN30 | Korea RRL Notice 30 (2004) | Conformity Assessment Procedures for Electromagnetic Interference using KN 16-1, KN 16-2, KN 11, KN 13, KN 14-1, KN 15, KN 19, KN 22, KN 41, and KN 50. |
| ECT-EMIS | 12/KNcis11 | KN11 with RRL Notice No. 2005-82 (Sept. 29, 2005) | Industrial, scientific and medical (ISM) radio frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement |
| ECT-EMIS | 12/KR126 | RRL Notice No. 2006-126 (Dec. 29, 2006) | Technical Requirements for Electromagnetic Interference |
| ECT-EMIS | 12/KR127a | RRL Notice No. 2006-127 (Dec. 29, 2006) | Technical Requirements for Electromagnetic Susceptibility |
| ECT-EMIS | 12/KR128 | RRL Notice No. 2006-128 (Dec. 29, 2006) | Conformity Assessment Procedure for Electromagnetic Interference |
| ECT-EMIS | 12/KR129 | RRL Notice No. 2006-129 (Dec. 29, 2006) | Conformity Assessment Procedure for Electronic Susceptibility |
| ECT-EMIS | 12/KR66 | RRL Notice No. 2004-66 (September 2004) | Technical Requirements for the Measurement of Electromagnetic Field Strength |
| ECT-EMIS | 12/Kn11d | KN11 (Annex 3) with RRL Notice No. 2008-02 | Conformity Assessment Procedure for Electromagnetic Interference; With KN 11 (Annex 3) |
| ECT-EMIS | 12/MIL704d | MIL-STD-704 Revision D (September 30, 1980) | Aircraft Electrical Power Characteristics |
| ECT-EMIS | 12/MIL704f | MIL-STD-704 Revision F (March 12, 2004) | Aircraft, Electric Power Characteristics |
| ECT-EMIS | 12/N4232d | ANSI N42.32 (2007-01), Section 8.4 | American National Standard Performance Criteria for Alarming Personal Radiation Detectors for Homeland Security , Section 8.4-Radiated Emissions |
| ECT-EMIS | 12/N4233e | ANSI N42.33 (2007-01), Section 8.5 | American National Standard for Portable Radiation Detection Instrumentation for Homeland Security , Section 8.5 - Radiated Emissions |
| ECT-EMIS | 12/N4234c | ANSI N42.34 (2007-01), Section 8.3 | American National Standard Performance Criteria for Hand-Held Instruments for the Detection and Identification of Radionuclides, Section 8.3 - Radiated Emissions |
| ECT-EMIS | 12/N4235b | ANSI N42.35 (2007-01), Section 8.2 | American National Standard for Evaluation and Performance of Radiation Detection Portal Monitors for Use in Homeland Security , Section 8.2 - Radiated Emissions |
| ECT-EMIS | 12/RRA0811 | RRA Notice No 2008-11 (Dec 16, 2008) | Conformity Assessment procedure for Electromagnetic Interference |
| ECT-EMIS | 12/RRA0815 | RRA Public Notification 2008-15, K only (May 21, 2008) | Notice on designation and management of testing laboratories for broadcasting and communications equipment |
| ECT-EMIS | 12/T51 | AS/NZS CISPR 22 (2002) and AS/NZS 3548 (1997) | Electromagnetic Interference - Limits and Methods of Measurement of Information Technology Equipment |
| ECT-EMIS | 12/T51a | AS/NZS CISPR 22 (2004) | Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement |
| ECT-EMIS | 12/T51b | AS/NZS CISPR 22, 3rd Edition (2006) | Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement |
| ECT-EMIS | 12/T51c | AS/NZS CISPR 22 (2002) | Electromagnetic Interference - Limits and Methods of Measurement of Information Technology Equipment |
| ECT-EMIS | 12/UMTA01 | UMTA-MA-06-0153-85-9 | Inductive Interference in Rapid Transit Signaling Systems - Volume III: Data and Test Results |
| ECT-EMIS | 12/UMTA02 | UMTA-MA-06-0153-85-11 | Radiated Interference in Rapid Transit Signaling Systems - Volume II: Suggested Test Procedures |
| ECT-EMIS | 12/UMTA03 | UMTA-MA-06-0153-87-2 | Conductive Interference in Rapid Transit Signaling Systems - Volume II: Suggested Test Procedures |
| ECT-EMIS | 12/VCCIa | VCCI | Agreement of Voluntary Control Council for Interference by Information Technology Equipment - Technical Requirements: V-3/2005.04 |
| ECT-EMIS | 12/VCCIb | Agreement of VCCI V-3 (2006.04) | Agreement of Voluntary Control Council for Interference by Information Technology Equipment - Technical Requirements: V-3/2006.04 |
| ECT-EMIS | 12/VCCIc | Agreement of VCCI V-3 (2007.04) | Agreement of Voluntary Control Council for Interference by Information Technology Equipment - Technical Requirements: V-3/2007.04 |
| ECT-EMIS | 12/VCCId | Agreement of VCCI V-3 (2008.04) | Agreement of Voluntary Control Council for Interference by Information Technology Equipment - Technical Requirements: V-3/2008.04 |
| ECT-EMIS | 12/VCCIe | Agreement of VCCI V-3 (2009.04) | Agreement of Voluntary Control Council for Interference by Information Technology Equipment - Technical Requirements: V-3/2009.04 (Above 1GHz) |
| ECT-EMIS | 12/WC01 | ANSI/RESNA WC/Vol. 2-1998 | American National Standard for Wheelchairs - Volume 2: Additional Requirements for Wheelchairs (Including Scooters) with Electrical Systems |
| ECT-ENERGY | 12/ES1a | Power Supply Efficiency | IPS Generalized Internal Power Supply Efficiency Test Protocol Rev. 4.6.2 |
| ECT-ENERGY | 12/ES1b | Power Supply Efficiency | EPS Energy Star Test Methodfor External Power Supplies (April 2004) |
| ECT-ENERGY | 12/ES2 | ETEC (from measurements of Off, Sleep, and Idle modes) | Energy Star Computer Test Method (Ver. 5.0), Section 3 (Appendix A) |
| ECT-ENERGY | 12/ES3 | PTEC | Energy Star Computer Test Method (Version 5.0), Section 3 (Appendix A) |
| ECT-ENERGY | 12/ES4 | Off Mode, Sleep Mode, Idle State Maximum Power | Energy Star Computer Test Method (Version 5.0), Section 3 (Appendix A) |
| ECT-IMMUN | 12/10605 | ISO 10605, First Edition (2001-12-15) | Road vehicles — Test methods for electrical disturbances from electrostatic discharge. |
| ECT-IMMUN | 12/10605d | ISO 10605 (2001) using DC-10614 | Road vehicles — Test methods for electrical disturbances from electrostatic discharge using Daimler Chrysler DC-10614 |
| ECT-IMMUN | 12/10605f | ISO 10605 (2001) using Ford ES-XW7T-1A278-AC | Road vehicles — Test methods for electrical disturbances from electrostatic discharge, First Ed., 2001-12-15 using Ford ES-XW7T-1A278-AC |
| ECT-IMMUN | 12/10605g | ISO 10605 (2001) using GMW3097 | Road vehicles — Test methods for electrical disturbances from electrostatic discharge using General Motors GMW3097 |
| ECT-IMMUN | 12/11452a | ISO 11452-1 (2005) | Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 1: General principles and terminology |
| ECT-IMMUN | 12/11452b | ISO 11452-2 (2004) | Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 2: Absorber-lined shielded enclosure |
| ECT-IMMUN | 12/11452c | ISO 11452-3 (2001) | Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 3: Transverse electromagnetic mode (TEM) cell |
| ECT-IMMUN | 12/11452d | ISO 11452-4 (2001) | Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 4: Bulk current injection (BCI) |
| ECT-IMMUN | 12/11452e | ISO 11452-5 (2002) | Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 5: Stripline |
| ECT-IMMUN | 12/11452f | ISO 11452-4 (2005) | Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 4: Bulk current injection (BCI) |
| ECT-IMMUN | 12/160C15 | RTCA/DO-160C (1989) | Environmental Conditions and Test Procedures for Airborne Equipment - Section 15 - Magnetic Effect |
| ECT-IMMUN | 12/160C16 | RTCA/DO-160C (1989 | Environmental Conditions and Test Procedures for Airborne Equipment - Section 16 - Power Input |
| ECT-IMMUN | 12/160C17 | RTCA/DO-160C (1989) | Environmental Conditions and Test Procedures for Airborne Equipment - Section 17 - Voltage Spike |
| ECT-IMMUN | 12/160C18 | RTCA/DO-160C (1989) | Environmental Conditions and Test Procedures for Airborne Equipment - Section 18 - Audio Frequency Conducted Susceptibility - Power Inputs |
| ECT-IMMUN | 12/160C19 | RTCA/DO-160C (1989) | Environmental Conditions and Test Procedures for Airborne Equipment - Section 19 - Induced Signal Susceptibility |
| ECT-IMMUN | 12/160C20 | RTCA/DO-160C (1989) | Environmental Conditions and Test Procedures for Airborne Equipment - Section 20 - Radio Frequency Susceptibility (Radiated and Conducted) |
| ECT-IMMUN | 12/160C22 | RTCA/DO-160C (1989) | Environmental Conditions and Test Procedures for Airborne Equipment - Section 22 - Lightning Induced Transient Susceptibility |
| ECT-IMMUN | 12/160D05 | RTCA/DO-160D (19997) | Environmental Conditions and Test Procedures for Airborne Equipment - Section 5: Temperature |
| ECT-IMMUN | 12/160D06 | RTCA/DO 160-D (1997) | Environmental Conditions and Test Procedures for Airborne Equipment - Section 6: Humidity |
| ECT-IMMUN | 12/160D15 | RTCA/DO-160D (1997) | Environmental Conditions and Test Procedures for Airborne Equipment - Section 15 - Magnetic Effect |
| ECT-IMMUN | 12/160D16 | RTCA/DO-160D (1997) | Environmental Conditions and Test Procedures for Airborne Equipment - Section 16 - Power Input |
| ECT-IMMUN | 12/160D17 | RTCA/DO-160D (1997) | Environmental Conditions and Test Procedures for Airborne Equipment - Section 17 - Voltage Spike |
| ECT-IMMUN | 12/160D18 | RTCA/DO-160D (1997) | Environmental Conditions and Test Procedures for Airborne Equipment - Section 18 - Audio Frequency Conducted Susceptibility - Power Inputs |
| ECT-IMMUN | 12/160D19 | RTCA/DO-160D (1997) | Environmental Conditions and Test Procedures for Airborne Equipment - Section 19 - Induced Signal Susceptibility |
| ECT-IMMUN | 12/160D20 | RTCA/DO-160D (1997) | Environmental Conditions and Test Procedures for Airborne Equipment - Section 20 - Radio Frequency Susceptibility (Radiated and Conducted) |
| ECT-IMMUN | 12/160D20b | RTCA/DO-160 (1997) | Environmental Conditions and Test Procedures for Airborne Equipment - Section 20.6: Radio Frequency Susceptibility (Radiated Mode Tuned) |
| ECT-IMMUN | 12/160D22 | RTCA/DO-160D (1997) | Environmental Conditions and Test Procedures for Airborne Equipment - Section 22 - Lightning Induced Transient Susceptibility |
| ECT-IMMUN | 12/160D23 | RTCA/DO-160D (1997) | Environmental Conditions and Test Procedures for Airborne Equipment - Section 23 - Lightning Direct Effects |
| ECT-IMMUN | 12/160D25 | RTCA/DO-160D (1997) | Environmental Conditions and Test Procedures for Airborne Equipment - Section 25 - Electrostatic Discharge (ESD) |
| ECT-IMMUN | 12/160F15 | RTCA/DO 160F (2007) | Environmental Conditions and Test Procedures for Airborne Equipment - Section 15 - Magnetic Effect |
| ECT-IMMUN | 12/160F16 | RTCA/DO-160F (2007) | Environmental Conditions and Test Procedures for Airborne Equipment - Section 16 - Power Input |
| ECT-IMMUN | 12/160F17 | RTCA/DO-160F (2007) | Environmental Conditions and Test Procedures for Airborne Equipment - Section 17 - Voltage Spike |
| ECT-IMMUN | 12/160F18 | RTCA/DO-160F (2007) | Environmental Conditions and Test Procedures for Airborne Equipment - Section 18 - Audio Frequency Conducted Suspceptibility - Power Inputs |
| ECT-IMMUN | 12/160F19 | RTCA/DO-160F (2007) | Environmental Conditions and Test Procedures for Airborne Equipment - Section 19 - Induced Signal Susceptibility |
| ECT-IMMUN | 12/160F20 | RTCA/DO-160F (2007) | Environmental Conditions and Test Procedures for Airborne Equipment - Section 20 - Radio Frequency Susceptibility (Radiated and Conducted) |
| ECT-IMMUN | 12/160F22 | RTCA/DO-160F (2007) | Environmental Conditions and Test Procedures for Airborne Equipment - Section 22 - Lightning Induced Transient Susceptibility |
| ECT-IMMUN | 12/160F23 | RTCA/DO-160F (2007) | Environmental Conditions and Test Procedures for Airborne Equipment - Section 23 - Lightning Direct Effects |
| ECT-IMMUN | 12/160F25 | RTCA/DO-160F (2007) | Environmental Conditions and Test Procedures for Airborne Equipment - Section 25 - Electrostatic Discharge (ESD) |
| ECT-IMMUN | 12/331C | MIL-STD-331C, Test F1.1 | Fuze and Fuze Components, Environmental and Performance Tests for - Test F1.1 - Electrostatic Discharge |
| ECT-IMMUN | 12/5006521 | EN 50065-2-1:2003 (intended for use in residential, commerci | Signalling on Low Voltage electrical Installations in the frequency range 3 kHz to 148,5 kHz - Part 2-1: Immunity requirements for mains comunications equipment and systems in the range of frequencies 95 kHz to 148,5 kHz and intended ... |
| ECT-IMMUN | 12/5006522 | EN 50065-2-2:2003 (intended for industrial environments) | Signalling on Low Voltage electrical Installations in the frequency range 3 kHz to 148,5 kHz - Part 2-1: Immunity requirements for mains comunications equipment and systems in the range of frequencies 95 kHz to 148,5 kHz and intended ... |
| ECT-IMMUN | 12/5006523 | EN 50065-2-3:2003 (intended for use by electricity suppliers | Signalling on Low Voltage electrical Installations in the frequency range 3 kHz to 148,5 kHz - Part 2-1: Immunity requirements for mains communications equipment and systems in the range of frequencies 95 kHz to 148,5 kHz and intended ... |
| ECT-IMMUN | 12/50091c | EN 50091-2: 1999 | Uninterruptible power systems (UPS) - Part 2: EMC Requirements |
| ECT-IMMUN | 12/50121a | EN 50121-1 (2000) and prEN 50121-1 (1997) | Railway applications - Electromagnetic compatibility - Part 1: General |
| ECT-IMMUN | 12/50121d | EN 50121-1 (2006) | Railway applications - Electromagnetic compatibility - Part 1: General |
| ECT-IMMUN | 12/501304 | EN 50130-4 (1996) | Alarm systems - Part 4. Electromagnetic compatibility - Product family standard: Immunity requirements for components of fire, intruder and social alarm systems |
| ECT-IMMUN | 12/501304a | EN 50130-4 (1995) + A1(1998) & A2(2003) | Alarm systems - Part 4. Electromagnetic compatibility - Product family standard: Immunity requirements for components of fire, intruder and social alarm systems |
| ECT-IMMUN | 12/50199 | EN 50199 (1996) | Electromagnetic compatibility (EMC) - Product standard for arc welding equipment |
| ECT-IMMUN | 12/503702 | EN 50370-2 (2003) | Electromagnetic compatibility (EMC) Product Family Standard for Machine Tools Part 2: Immunity |
| ECT-IMMUN | Dec-16 | SAE ARP 5416 (2005-03) | Aircraft Lightning Test Methods |
| ECT-IMMUN | 12/55103b | EN 55103-2 (1996) | Electromagnetic compatibility - Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use - Part 2: Immunity |
| ECT-IMMUN | 12/55103d | BS EN 55103-2 (1997) | Electromagnetic compatibility - Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use - Part 2. Immunity |
| ECT-IMMUN | 12/60601ad | KN 60601-1-2 (Annex 12) RRA Announce 2008-12 (Dec. 16, 2008) | Conformity Assessment Procedure for EMS (Medical Electrical Equipment) |
| ECT-IMMUN | 12/60945 | EN 60945 (1997) and IEC 945 (1996) | Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results |
| ECT-IMMUN | 12/60945a | EN 60945 (2002) | Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results |
| ECT-IMMUN | 12/60945b | EN 60945 (2002) and IEC 60945 (2002) | Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results |
| ECT-IMMUN | 12/60947 | BS EN 60947-2 (2006) | Low-voltage switchgear and control gear. Circuit-breakers |
| ECT-IMMUN | 12/60947e | IEC 60947-4-2 (1999), A1 (2001) | Low-Voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters - AC semiconductor motor controllers and starters. |
| ECT-IMMUN | 12/60947f | EN 60947-5-2 (1998), A1 (1999) | Low-voltage switchgear and controlgear - Part 5-2: Control circuit devices and switching elements proimity switches |
| ECT-IMMUN | 12/60E04 | RTCA/DO-160E | Section 4: Temperature and Altitude |
| ECT-IMMUN | 12/60E05 | RTCA DO -160E | Section 5: Temperature |
| ECT-IMMUN | 12/60E06 | RTCA DO-160E | Section 6: Humidity |
| ECT-IMMUN | 12/60E07 | RTCA/DO-160E | Section 7: Operational Shock and Crash Safety |
| ECT-IMMUN | 12/60E08 | RTCA/DO-160E | Section 8: Vibration |
| ECT-IMMUN | 12/60E14 | RTCA/DO-160E | Section 14: Salt Spray |
| ECT-IMMUN | 12/60E15 | RTCA DO 160E | Section 15, Magnetic Effects |
| ECT-IMMUN | 12/60E16 | RTCA DO160E | Section 16, Power Input |
| ECT-IMMUN | 12/60E17 | RTCA DO-160E | Section 17, Voltage Spikes |
| ECT-IMMUN | 12/60E18 | RTCA DO-160E | Section 18, Audio Frequency Conducted Susceptibility |
| ECT-IMMUN | 12/60E19 | RTCA DO-160E | Section 19, Induced Signal Susceptibility |
| ECT-IMMUN | 12/60E204 | RTCA DO-160E | Section 20.4, RF Susceptibility, Conducted |
| ECT-IMMUN | 12/60E205 | RTCA DO-160E | Section 20.5, RF Susceptibility, Radiated |
| ECT-IMMUN | 12/60E206 | RTCA DO-160E | Section 20.6: RF Susceptability (Radiated Mode Tuned) |
| ECT-IMMUN | 12/60E22 | RTCA DO-160E | Section 22, Lightning Induced Transient Susceptibility |
| ECT-IMMUN | 12/60E23 | RTCA DO-160E | Section 23,Lightning Direct Effects |
| ECT-IMMUN | 12/60E25 | RTCA DO-160E | Section 25, Electrostatic Discharge (ESD) |
| ECT-IMMUN | 12/610006a | EN 61000-6-1 (2001) | Electromagnetic compatibility (EMC) - Part 6 - 1: Generic standards - Immunity for residential, commercial and light-industrial environments |
| ECT-IMMUN | 12/610006b | EN 61000-6-2 (2001) | Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial environments |
| ECT-IMMUN | 12/610006f | IEC 61000-6-1, 1st edition (1997-07) | Electromagnetic compatibility (EMC) - Part 6: Generic standards - Section 1: Immunity for residential, commercial and light-industrial environments |
| ECT-IMMUN | 12/610006g | IEC 61000-6-2, 1st edition (1999-01) | Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial environments |
| ECT-IMMUN | 12/610006h | IEC 61000-6-1, 2nd edition (2005-03) | Electromagnetic compatibility (EMC) - Part 6: Generic standards - Section 1: Immunity for residential, commercial and light-industrial environments |
| ECT-IMMUN | 12/610006i | IEC 61000-6-2, Edition 2.0 (2005-01) | Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial environments |
| ECT-IMMUN | 12/610006j | EN 61000-6-2 (2005) | Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial environments |
| ECT-IMMUN | 12/610006n | EN 61000-4-4 (2007) | Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical Fast Transient/Burst Immunity Test |
| ECT-IMMUN | 12/61000k | EN 61000-6-1 (2007) | Electromagnetic compatibility (EMC) - Part 6 - 1: Generic standards - Immunity for residential, commercial and light-industrial environments |
| ECT-IMMUN | 12/61326 | EN 61326 (1998) and IEC 61326 (1997) | Electrical equipment for measurement, control and laboratory use - EMC requirements |
| ECT-IMMUN | 12/61326a1 | EN 61326(1998) and IEC 61326(1997) + A1(1998) & A2(2001) | Electrical equipment for measurement, control and laboratory use - EMC requirements |
| ECT-IMMUN | 12/61326a2 | EN 61326 (1997), A1 (1998), A2 (2001), A3 (2003) | Electrical equipment for measurement, control and laboratory use - EMC requirements |
| ECT-IMMUN | 12/61326a3 | EN 61326 (1998) | Electrical equipment for measurement, control and laboratory use - EMC requirements |
| ECT-IMMUN | 12/61326a4 | EN 61326-1(2006) | Electrical equipment for measurement, control and laboratory use - EMC requirements |
| ECT-IMMUN | 12/61326f | BS EN 61326-1 (2006) | Electrical equipment for measurement, control and laboratory use. EMC requirements. General requirements |
| ECT-IMMUN | 12/61326i | IEC 61326-1, Edition 1.2 (2000-11) | Electrical equipment for measurement, control and laboratory use - EMC requirements |
| ECT-IMMUN | 12/61326j | IEC 61326-2-6, Ed. 1.0 (2005-12) | Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment |
| ECT-IMMUN | 12/61547 | EN 61547 (October 1995) and IEC 61547 (1995) + Amd 1 (2000) | Equipment for general lighting purposes EMC immunity requirements |
| ECT-IMMUN | 12/61547a | IEC 61547 (1995) | Equipment for general lighting purposes EMC immunity requirements |
| ECT-IMMUN | 12/61547b | IEC 61547 (1995) + Amd 1 (2000); EN 61547 (1995) + A1 (2000) | Equipment for general lighting purposes EMC immunity requirements |
| ECT-IMMUN | 12/ABS | American Bureau of Shipping (ABS) Rules for Building and Classing Steel Vessels (2002): Part 4 - Vessel Systems and Machinery | |
| ECT-IMMUN | 12/ANC63 | ANSI C63.16 (1993) | American National Standard Guide for Electrostatic Discharge Test Methodologies and Criteria for Electronic Equipment |
| ECT-IMMUN | 12/AS4252a | AS/NZS 4252.1 (1994) | Electromagnetic compatibility - Generic immunity standard - Residential, commercial and light industry |
| ECT-IMMUN | 12/C62a | IEEE Std C62.38 (1994) | IEEE Guide on Electrostatic Discharge (ESD): ESD Withstand Capability Evasluation Methods (for Electronic Equipment Subassemblies) |
| ECT-IMMUN | 12/CIS14i | EN 55014-2 (1997) and IEC/CISPR 14-2 (1997) | Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2. Immunity - Product family standard |
| ECT-IMMUN | 12/CIS14i1 | EN 55014-2 (1997) | Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2. Immunity - Product family standard |
| ECT-IMMUN | 12/CIS14i2 | EN 55014-2 (1997) + A1 (2001) | Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2. Immunity - Product family standard |
| ECT-IMMUN | 12/CIS14i3 | EN 55014-2:1997 +A1 (2001) + A2 (2008) | Electromagnetic compatibility. Requirements for household appliances, electric tools and similar apparatus. Immunity |
| ECT-IMMUN | 12/CIS14ia | IEC/CISPR 14-2, Edition 1.1 (2001-11) | Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard |
| ECT-IMMUN | 12/CIS14ib | IEC/CISPR 14-2 (1997), A1 (2001) | Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard |
| ECT-IMMUN | 12/CIS14ic | IEC/CISPR 14-2 Ed. 1.2 (2008) | Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard |
| ECT-IMMUN | 12/CIS14j | IEC/CISPR 14-2 (2001) Ed. 4 and EN 55014-2 | Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard |
| ECT-IMMUN | 12/CIS14k | AS/NZS CISPR 14.2 (2003) | Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2. Immunity - Product family standard |
| ECT-IMMUN | 12/CIS16a | IEC/CISPR 16-1, Ed. 2 (1999-10) | Specification for radio disturbance and immunity measuring apparatus and methods - Part 1: Radio disturbance and immunity measuring apparatus |
| ECT-IMMUN | 12/CIS16b | IEC/CISPR 16-2 (1996) | Specification for radio disturbance and immunity measuring apparatus and methods - Part 2: Methods of measurement of disturbances and immunity |
| ECT-IMMUN | 12/CIS16b1 | CISPR 16-2-1 (2005) Ed. 1.1 | Specification for Radio Disturbance and Immunity Measuring Apparatus and Methods-Part 2-1: Methods of measurement of disturbance and immunity -Conducted disturbance measurements |
| ECT-IMMUN | 12/CIS16b3 | CISPR 16-2-3 (2006) Ed. 2 | Specification for Radio Disturbance and Immunity Measuring Apparatus and Methods-Part 2-3: Methods of measurement of disturbance and immunity-Radiated disturbance measurement |
| ECT-IMMUN | 12/CIS16b4 | CISPR 16-2-4 (2003) | Specification for Radio Disturbance and Immunity Measuring Apparatus and Methods - Part 2-4: Methods of measurement of disturbance and immunity-Immunity measurements |
| ECT-IMMUN | 12/CIS16c1 | CISPR 16-2-1 Ed. 2.0 (2008) | Specification for Radio Disturbance and Immunity Measuring Apparatus and Methods-Part 2-1: Methods of measurement of disturbance and immunity -Conducted disturbance measurements |
| ECT-IMMUN | 12/CIS16c2 | CISPR 16-2-2 Ed. 1.2 (2005) | Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-2: Methods of measurement of disturbances and immunity - Measurement of disturbance power |
| ECT-IMMUN | 12/CIS20 | IEC/CISPR 20 (2002-02) and EN 55020 (1994) | Sound and television broadcast receivers and associated equipment - Immunity characteristics - Limits and methods of measurement |
| ECT-IMMUN | 12/CIS20a | IEC/CISPR 20 (2002-02) Ed 4, A1(2002-10) and EN 55020 (2002) | Sound and television broadcast receivers and associated equipment - Immunity characteristics - Limits and methods of measurement |
| ECT-IMMUN | 12/CIS20aa | IEC/CISPR 20 (2002-02) Ed 5, A1(2002)+ A2 (2004) | Sound and television broadcast receivers and associated equipment - Immunity characteristics - Limits and methods of measurement |
| ECT-IMMUN | 12/CIS20ab | EN 55020 (2002) + A1 (2003) + A2 (2005) | Sound and television broadcast receivers and associated equipment - Immunity characteristics - Limits and methods of measurement |
| ECT-IMMUN | 12/CIS20b | IEC/CISPR 20, 5th Ed. (2002-02) | Sound and television broadcast receivers and associated equipment - Immunity characteristics - Limits and methods of measurements |
| ECT-IMMUN | 12/CIS20c | EN 55020 (2007-01) | Sound and television broadcast receivers and associated equipment - immunity characteristics - Limits and methods of measurement |
| ECT-IMMUN | 12/CIS20d | EN 55020 (2002) +A1 (2003) + A2 (2005) | Sound and television broadcast receivers and associated equipment - immunity characteristics - Limits and methods of measurement |
| ECT-IMMUN | 12/CIS20e | IEC/CISPR 20 (2006) | Sound and television broadcast receivers and associated equipment - Immunity characteristics - Limits and methods of measurement |
| ECT-IMMUN | 12/CIS24 | IEC/CISPR 24 (1997) A2(2002) & EN 55024 (1998) A2(2003) | Information technology equipment - Immunity characteristics - Limits and methods of measurement |
| ECT-IMMUN | 12/CIS24a | EN 55024 and CISPR 24 (1997, modified) | Information technology equipment - Immunity characteristics - Limits and methods of measurements |
| ECT-IMMUN | 12/CIS24b | AS/NZS CISPR 24 (2002) | Information technology equipment - Immunity characteristics - Limits and methods of measurement |
| ECT-IMMUN | 12/CIS24c | EN 55024 (1998) and A1 (2001) | Information technology equipment - Immunity characteristics - Limits and methods of measurement |
| ECT-IMMUN | 12/CIS24d | IEC/CISPR 24 (1997) & EN 55024 (1998) + A1 (2001), A2 (2002) | Information technology equipment - Immunity characteristics - Limits and methods of measurements |
| ECT-IMMUN | 12/CIS24e | IEC/CISPR 24 (1997) and EN 55024 (1998) + A1(2001), A2(2003) | Information technology equipment - Immunity characteristics - Limits and methods of measurement |
| ECT-IMMUN | 12/DO160E | RTCA DO-160E (December 9, 2004) | Environmental Conditions and Test Procedures for Airborne Equipment |
| ECT-IMMUN | 12/EM34 | IEC 61000-4-34 (2005), EN 61000-4-34 (2007) | EMC Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage varations immunity tests for equipment with input current more than 16A per phase |
| ECT-IMMUN | 12/EN82b | EN 50082-2 (March 1995) | Electromagnetic compatibility - Generic immunity standard - Part 2: Industrial environment |
| ECT-IMMUN | 12/ENV01 | DD ENV 50204 (1996) | Radiated electromagnetic field from digital radio telephones - Immunity test |
| ECT-IMMUN | 12/F42600 | SEMI F42-0600 | Test method for semiconductor processing equipment voltage sag immunity |
| ECT-IMMUN | 12/F47200 | SEMI F47-0200 | Specification for semiconductor processing equipment voltage sag immunity |
| ECT-IMMUN | 12/I01 | IEC 61000-4-2, Ed. 1.2 (2001); EN 61000-4-2 | Electrostatic Discharge Immunity Test |
| ECT-IMMUN | 12/I01a | IEC 61000-4-2 (1995), A1(1998), A2(2000); EN 61000-4-2(1995) | ESD Immunity Test |
| ECT-IMMUN | 12/I01b | IEC 61000-4-2 (2001); EN 61000-4-2 (2001), A2 (2001) | Electrostatic Discharge Immunity Test |
| ECT-IMMUN | 12/I01c | EN 61000-4-2 +A1(1998) +A2(2001) | Electrostatic Discharge Immunity Test |
| ECT-IMMUN | 12/I01d | IEC 61000-4-2, Ed. 2.0 (2008-12) | Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
| ECT-IMMUN | 12/I01e | IEC 61000-4-2 (1995) | ESD Immunity Test |
| ECT-IMMUN | 12/I02 | IEC 61000-4-3, Ed. 2.0 (2002-03); EN 61000-4-3 (2002) | Radiated Radio-Frequency Electromagnetic Field Immunity Test |
| ECT-IMMUN | 12/I02a | IEC 61000-4-3, Ed. 2.1 (2002-09); EN 61000-4-3 (2002) | Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
| ECT-IMMUN | 12/I02b | IEC/EN 61000-4-3, Ed. 2.1 (2002), A1 (2002); EN 61000-4-3 | Radiated, radio-frequency, electromagnetic field immunity test |
| ECT-IMMUN | 12/I02c | IEC 61000-4-3 (1995), A1(1998), A2(2000) | Radiated, radio-frequency, electromagnetic field immunity test |
| ECT-IMMUN | 12/I02d | EN 61000-4-3 (1996), A1(1998), A2 (2001) | Radiated, radio-frequency, electromagnetic field immunity test |
| ECT-IMMUN | 12/I02e | EN 61000-4-3 (2002) + A1(2002) + IS1(2004) | Radiated, radio-frequency, electromagnetic field immunity test |
| ECT-IMMUN | 12/I02f | EN 61000-4-3 (2002) + A1(2002) | Radiated, radio-frequency, electromagnetic field immunity test |
| ECT-IMMUN | 12/I02g | IEC 61000-4-3, Ed. 3.0 (2006-02) | Electromagnetic compatibility (EMC) - Part 4-3: Testing measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
| ECT-IMMUN | 12/I02gg | IEC 61000-4-3, Ed. 3.0 (2006-02) + A1 (2007) | Electromagnetic compatibility (EMC) - Part 4-3: Testing measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
| ECT-IMMUN | 12/I02h | EN 61000-4-3 (2006) | Radiated, radio-frequency, electromagnetic field immunity test |
| ECT-IMMUN | 12/I02hh | EN 61000-4-3 (2006) +A1 (2008) | Electromagnetic compatibility (EMC). Testing and measurement techniques. Radiated, radio- Frequency, electromagnetic field immunity test |
| ECT-IMMUN | 12/I02i | IEC 61000-4-3, Ed. 3.1 (2008-04) | Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
| ECT-IMMUN | 12/I02j | IEC 61000-4-3 (1996) | Radiated, radio-frequency, electromagnetic field immunity test |
| ECT-IMMUN | 12/I03 | IEC 61000-4-4(1995), A1(2000), A2(2001); EN 61000-4-4 | Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical Fast Transient/Burst Immunity Test |
| ECT-IMMUN | 12/I03a | IEC/EN 61000-4-4 (2001), A1 (2001) | Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical Fast Transient/Burst Immunity Test |
| ECT-IMMUN | 12/I03b | EN 61000-4-4 (1995), A1(2001), A2(2001) | Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical Fast Transient/Burst Immunity Test |
| ECT-IMMUN | 12/I03c | IEC 61000-4-4, Ed. 2.0 (2004-07) | Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test |
| ECT-IMMUN | 12/I03d | IEC 61000-4-4, Ed. 2.0; Corr1:2006 | Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test |
| ECT-IMMUN | 12/I03e | EN 61000-4-4 (2004) | Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test |
| ECT-IMMUN | 12/I03f | IEC 61000-4-4 (1995) | Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical Fast Transient/Burst Immunity Test |
| ECT-IMMUN | 12/I04 | IEC 61000-4-5, Ed. 1.1 (2001-04); EN 61000-4-5 | Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test |
| ECT-IMMUN | 12/I04a | IEC 61000-4-5(1995),A1(2000); EN 61000-4-5(1995),A1(2001) | Surge Immunity Test |
| ECT-IMMUN | 12/I04a1 | IEC 61000-4-5(1995), A1(2001); EN 61000-4-5(1995), A1(2001) | Electromagnetic Compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test |
| ECT-IMMUN | 12/I04aa | IEC 61000-4-5, Ed. 2.0 (2005-11); EN 61000-4-5 | Electromagnetic Compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test |
| ECT-IMMUN | 12/I04b | IEC 61000-4-5 (2001), A1(2000); EN 61000-4-5(2001), A1(2000) | Surge Immunity Test |
| ECT-IMMUN | 12/I04c | IEC 61000-4-5, Ed 1.1 (2005-11) | EMC - Part 4-5: Testing and measurement techniques - Surge immunity test |
| ECT-IMMUN | 12/I04d | BS EN 61000-4-5 (2006) | Electromagnetic compatibility (EMC). Testing and measurement techniques. Surge immunity test |
| ECT-IMMUN | 12/I04e | EN 61000-4-5 (1995), A1 (2001) | Electromagnetic Compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test |
| ECT-IMMUN | 12/I04f | IEC 61000-4-5 (1995) | Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test |
| ECT-IMMUN | 12/I05 | IEC 61000-4-6, Ed. 2.0 (2003-05); EN 61000-4-6 | Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
| ECT-IMMUN | 12/I05a | IEC 61000-4-6 (1996),A1(2000); EN 61000-4-6(1996),A1(2001) | Immunity to Conducted Disturbances, Induced by Radio Frequency Fields |
| ECT-IMMUN | 12/I05b | IEC/EN 61000-4-6 (2001), A1 (2001) | Immunity to Conducted Disturbances, Induced by Radio Frequency Fields |
| ECT-IMMUN | 12/I05bb | IEC 61000-4-6, Edition 1.1 (2001-04) | Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
| ECT-IMMUN | 12/I05c | IEC 61000-4-6 (2003-05) + A1(2004); EN 61000-4-6 | Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
| ECT-IMMUN | 12/I05cc | IEC 61000-4-6 (2003-05) + A2 (2006-03) | Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
| ECT-IMMUN | 12/I05d | IEC 61000-4-6, Ed. 2.1 (2004); EN 61000-4-6 | Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
| ECT-IMMUN | 12/I05e | EN 61000-4-6 (1996) + A1 (2001) | Immunity to Conducted Disturbances, Induced by Radio Frequency Fields |
| ECT-IMMUN | 12/I05e1 | EN 61000-4-6 (1996) + A1 (2001) + A2 (2006) | Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
| ECT-IMMUN | 12/I05ee | IEC 61000-4-6, Ed. 2.2 (2006-05) | Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
| ECT-IMMUN | 12/I05f | IEC 61000-4-6, Ed 2.0 (2006-05) | EMC - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
| ECT-IMMUN | 12/I05f1 | IEC 61000-4-6 Ed. 3.0 (2008) | Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
| ECT-IMMUN | 12/I05g | EN 61000-4-6 (2006) | Immunity to Conducted Disturbances, Induced by Radio Frequency Fields |
| ECT-IMMUN | 12/I05h | EN 61000-4-6 (2007) | Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
| ECT-IMMUN | 12/I05i | IEC 61000-4-6 (1996) | Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
| ECT-IMMUN | 12/I06 | IEC 61000-4-8, Ed. 1.1 (2001); EN 61000-4-8 | Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test |
| ECT-IMMUN | 12/I06a | IEC 61000-4-8(1993), A1(2000); EN 61000-4-8(1994), A1(2000) | Power Frequency Magnetic Field Immunity Test |
| ECT-IMMUN | 12/I06b | IEC 61000-4-8 (2001), A1(2000); EN 61000-4-8 (2001),A1(2000) | Power Frequency Magnetic Field Immunity Test |
| ECT-IMMUN | 12/I06c | EN 61000-4-8 (1993) + A1 (2001) | Power Frequency Magnetic Field Immunity Test |
| ECT-IMMUN | 12/I06d | IEC 61000-4-8 (1993) | Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test |
| ECT-IMMUN | 12/I07 | IEC 61000-4-11, Ed. 1.1 (2001-03); EN 61000-4-11 | Voltage Dips, Short Interruptions and Voltage Variations Immunity Tests |
| ECT-IMMUN | 12/I07a | IEC 61000-4-11(1994),A1(2001) & EN 61000-4-11(1994),A1(2001) | Voltage Dips, Short Interruptions and Voltage Variations Immunity Tests |
| ECT-IMMUN | 12/I07b | IEC/EN 61000-4-11 (2001), A1 (2001) | Voltage Dips, Short Interuptions and Voltage Variations Immunity Tests |
| ECT-IMMUN | 12/I07c | IEC 61000-4-11, Ed. 2 (2004-03) & EN 61000-4-11 | Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests |
| ECT-IMMUN | 12/I07d | IEC 61000-4-11(1994),A1(2000) & EN 610004-11(1994),A1(2001) | Voltage Dips, Short Interruptions and Voltage Variations Immunity Tests |
| ECT-IMMUN | 12/I07e | EN 61000-4-11 (1994), A1 (2001) | Voltage Dips, Short Interruptions and Voltage Variations Immunity Tests |
| ECT-IMMUN | 12/I07f | EN 61000-4-11 (2004) | Voltage Dips, Short Interruptions and Voltage Variations Immunity Tests |
| ECT-IMMUN | 12/I07g | IEC 61000-4-11 (2004) | Voltage Dips, Short Interruptions and Voltage Variations Immunity Tests |
| ECT-IMMUN | 12/I07h | IEC 61000-4-11 (1994) | Voltage Dips, Short Interruptions and Voltage Variations Immunity Tests |
| ECT-IMMUN | 12/I08 | IEC/CISPR 24 (1997), Amd1, A1(2001); EN 55024 (1998) | Information technology equipment - Immunity characteristics - Limits and methods of measurement |
| ECT-IMMUN | 12/I08a | EN 55024 (1998) + A1 (2001) + A2 (2003) | Information Technology Equipment - Immunity Characteristics - Limits and Methods of Measurement |
| ECT-IMMUN | 12/I09 | EN 50082-1 (1998) | Electromagnetic compatibility - Generic immunity standard - Part 1: Residential, commercial and light industry |
| ECT-IMMUN | 12/I11 | EN 50083-2 (1995) | Cabled distribution systems for television and sound signals - Part 2: Electromagnetic compatibility for equipment. |
| ECT-IMMUN | 12/I11b | EN 50083-2 (2001) | Cabled distribution systems for television and sound signals Part 2: Electromagnetic compatibility for equipment |
| ECT-IMMUN | 12/I11c | EN 50083-2:2001 + Ammendment 1:2005 | Cabled distribution systems for television and sound signals Part 2: Electromagnetic compatibility for equipment |
| ECT-IMMUN | 12/I11d | EN 50083-2 (2006) | Cabled distribution systems for television and sound signals Part 2: Electromagnetic compatibility for equipment |
| ECT-IMMUN | 12/I12 | IEC 61000-4-12 , Edition 1.1 (2001-04) | Testing and Measurement Techniques - Oscillatory Wave Immunity Test |
| ECT-IMMUN | 12/I12a | IEC 61000-4-12, 2nd edition (2006-09) | EMC - Part 4-12: Testing and measurement techniques - Ring wave immunity test |
| ECT-IMMUN | 12/IACS | IACS Req. 2006 Clause 13, 14, 15, 16, 17, 18, 19 | International Association of Classification Societies-concerning Electrical Installations-E10: Test Specification for Type Approval |
| ECT-IMMUN | 12/IEC407 | IEC 61000-4-7, Ed 2.0 (2002-08) | Immunity to conducted disturbances |
| ECT-IMMUN | 12/IEC409 | IEC 61000-4-09, Ed 1.1 (2001-03) | EMC - Part 4-9: Testing and Measurement Techniques - Pulse Magnetic Field Immunity Test |
| ECT-IMMUN | 12/IEC410 | IEC 61000-4-10, Ed 1.1 (2001-03) | EMC - Part 4-10: Testing and measurement techniques - Damped oscillatory magnetic field immunity test |
| ECT-IMMUN | 12/IEC414 | IEC 61000-4-14, Edition 1.1 (2002-07) | EMC - Part 4-14: Testing and Measurement Techniques - Voltage Fluctuation Immunity Test |
| ECT-IMMUN | 12/IEC416 | IEC 61000-4-16, Edition 1.1 (2002-07) | EMC - Part 4-16: Testing and Measurement Techniques - Test for Immunity to Conducted, Common Mode Disturbances in the Frequency Range 0 Hz to 150 kHz |
| ECT-IMMUN | 12/IEC417 | IEC 61000-4-17, Edition 1.1 (2002-07) | EMC - Part 4-17: Testing and Measurement Techniques - Ripple on d.c. Input Power Port Immunity Test |
| ECT-IMMUN | 12/IEC420 | IEC 61000-4-20, Edition 1.1 (2007-01) | EMC – Part 4-20: Testing and measurement techniques – Emission and immunity testing in transverse electromagnetic (TEM) waveguides |
| ECT-IMMUN | 12/IEC421 | IEC 61000-4-21, 1st Edition (2003-08) | EMC-Part 4-21: Testing and measurement techniques Reverberation chamber test methods |
| ECT-IMMUN | 12/IEC428 | IEC 61000-4-28, Edition 1.1 (2002-07) | EMC - Part 4-28: Testing and Measurement Techniques - Variation of Power Frequency, Immunity Test |
| ECT-IMMUN | 12/IT3001 | JEITA IT-3001 (2004) | Immunity Test Methods and Limits for Information Technology Equipment and Systems |
| ECT-IMMUN | 12/J111301 | SAE J1113/1 (2006-10) | Procedures and Limits for Components of Vehicles, Boats, and Machines (except Aircraft) |
| ECT-IMMUN | 12/J111302 | SAE J1113-2 (1996-09) | Electromagnetic compatibility measurement procedures and limits for vehicle components (except aircraft) - Conducted immunity, 30 Hz to 250 kHz - all leads |
| ECT-IMMUN | 12/J111303 | SAE J1113-3 (2006-09) | Direct Injection of Radio Frequency Power |
| ECT-IMMUN | 12/J111304 | SAE J1113-4 (2004-08) | Immunity to Radiated Electromagnetic Fields - Bulk Current Injection (BCI) Method |
| ECT-IMMUN | 12/J111311 | SAE J1113-11 (2006-01) | Immunity to Conducted Transients on Power Leads |
| ECT-IMMUN | 12/J111312 | SAE J1113-12 (2006-08) | Electrical Interference by Conduction and Coupling |
| ECT-IMMUN | 12/J111313 | SAE J1113-13 (2004-11) | Electromagnetic Compatibility Measurement Procedure for Vehicle Components - Part 13 - Immunity to Electrostatic Discharge |
| ECT-IMMUN | 12/J111321 | SAE J1113/21 (1998-01) | Road Vehicles - Electrical disturbances by narrowband radiated electromagnetic energy - Component test methods - Part 21 - Absorber-Lined Chamber |
| ECT-IMMUN | 12/J111322 | SAE J1113-22 (2003-11) | Immunity Radiated Magnetic Fields |
| ECT-IMMUN | 12/J111323 | SAE J1113/23 (1995-09) | Electromagnetic Compatibility Measurement Procedure for Vehicle Components - Immunity to Radiated Electromagnetic Fields, 10 kHz to 200 MHz, Strip Line Method |
| ECT-IMMUN | 12/J111324 | SAE J1113/24 | Immunity to radiated electromagnetic fields; 10 kHz to 200 MHz - Crawford TEM cell and 10 kHz to 5 GHz - Wideband TEM cell |
| ECT-IMMUN | 12/J111325 | SAE J1113-25 (2005-07) | Immunity to Radiated Electromagnetic Fields (Tri-Plate Line Method) |
| ECT-IMMUN | 12/J111326 | SAE J1113-26 (2006-05) | Immunity to AC Power Line Electric Fields |
| ECT-IMMUN | 12/J111327 | SAE J1113-27 (2005-09) | Mode Stir Reverberation Chambers (S3 and S5 Under Construction) |
| ECT-IMMUN | 12/J111328 | SAE J1113-28 (2004-11) | Immunity to Radiated Electromagnetic Fields- Reverberation Chambers (Mode Tuning) (S3 and S5 Under Construction) |
| ECT-IMMUN | 12/J111341 | SAE J1113/41 (2000-05) | Limits and methods of measurement of radio disturbance characteristics of components and modules for the protection of receivers used on board vehicles |
| ECT-IMMUN | 12/J111342 | SAE J1113-42 (2006-10) | EMT-Component Test Procedure - Part 42- Conducted Transient Emission |
| ECT-IMMUN | 12/J1113a | SAE J1113-21 (2005-10) | Immunity to Electromagnetic Fields, Absorber Lined Chamber |
| ECT-IMMUN | 12/J1113b | SAE J1113-23 (2002-10) | Immunity Radiated Magnetic Fields, Strip Line Method |
| ECT-IMMUN | 12/J1113c | SAE J1113-41 (2006-09) | Radio Disturbance Characteristics for the Protection of Receivers Used on Board Vehicles |
| ECT-IMMUN | 12/JISC411 | JIS C 1000-4-11 (2003) | Electromagnetic compatibility (EMC) -- Part 4: Testing and measuring techniques - Section 11: Voltage dips, short interruptions and voltage variations immunity tests |
| ECT-IMMUN | 12/JISC42 | JIS C 1000-4-2 (1999) | Electromagnetic compatibility (EMC) -- Part 4: Testing and measurement techniques -- Section 2: Electrostatic discharge immunity test |
| ECT-IMMUN | 12/JISC43 | JIS C 1000-4-3 (1997) | Electromagnetic compatibility (EMC) -- Part 4: Testing and measurement techniques -- Section 3: Radiated. radio-frequency. electromagnetic field immunity test |
| ECT-IMMUN | 12/JISC44 | JIS C 1000-4-4 (1999) | Electromagnetic compatibility (EMC) -- Part 4: Testing and measurement techniques -- Section 4: Electrical fast transient/burst immunity test |
| ECT-IMMUN | 12/JISC45 | JIS C 1000-4-5 (1999) | Electromagnetic compatibility (EMC) -- Part 4: Testing and measurement techniques -- Section 5: Surge immunity test |
| ECT-IMMUN | 12/JISC46 | JIS C 1000-4-6 (1999) | Electromagnetic compatibility (EMC) -- Part 4: Testing and measurement techniques -- Section 6: Immunity to conducted disturbances, induced by radio-frequency fields |
| ECT-IMMUN | 12/JISC48 | JIS C 1000-4-8 (2003) | Electromagnetic compatibility (EMC) -- Part 4: Testing and measurement techniques -- Section 8: Power-frequency magnetic field immunity test |
| ECT-IMMUN | 12/KCC0838 | KCC Notice 2008-38 | Korea Technical Requirements for Electromagnetic Susceptability (EMS) |
| ECT-IMMUN | 12/KN11 | KN 61000-4-11 with RRL Notice No. 2005-83 (Sept. 29, 2005) | Voltage Dips, Short Interruptions and Voltage Variations Immunity Tests |
| ECT-IMMUN | 12/KN11a | KN 61000-4-11 with RRL Notice No. 2005-130 (Dec 27, 2005) | Voltage Dips, Short Interruptions and Voltage Variations Immunity Tests |
| ECT-IMMUN | 12/KN11e | KN 61000-4-11 (Annex 7); RRL No. 2007-101 (Dec. 26, 2007) | Conformity Assessment Procedure for Electromagnetic Interference |
| ECT-IMMUN | 12/KN11f | KN 61000-4-11 (2008-5); RRL Notice No. 2008-4 (May 20, 2008) | Voltage Dips, Short Interruptions and Voltage Variations Immunity Tests |
| ECT-IMMUN | 12/KN11f1 | KN 61000-4-11 (Annex 7) RRA Announce 2008-12 (Dec. 16, 2008) | Conformity Assessment Procedure for EMS (Voltage Dips, Short Interruptions and Voltage Variations Immunity tests) |
| ECT-IMMUN | 12/KN11g | KN 61000-4-11 with RRL Notice No. 2006-127 (Dec 29, 2006) | Conformity Assessment Procedure for Electromagnetic Interference |
| ECT-IMMUN | 12/KN132 | Korea RRL Notice 132 (october 2005) | Conformity Assessment Procedure for Electromagnetic Susceptibility |
| ECT-IMMUN | 12/KN14c | KN14-2 (2008-5) with RRL Notice No. 2008-4 (May 20, 2008) | Electromagnetic Compatibility - Requirements for household appliances, electric tools and similar apparatus - Immunity |
| ECT-IMMUN | 12/KN150 | EMS RRL Notice No. 2005-130: 2005.12.27 | RRL Notice No. 2005-130: Technical Requirements for Electromagnetic Susceptibility Annex 1-7 (KN61000-4-2, -3, -4, -5, -6, -8, -11), RRL Notice No. 2005-132: Conformity Assessment Procedures for Electromagnetic Susceptibility |
| ECT-IMMUN | 12/KN2 | KN 61000-4-2 with RRL Notice No. 2005-83 (Sept. 29, 2005) | Electrostatic Discharge Immunity Test |
| ECT-IMMUN | 12/KN20 | KN20 with RRL Notice No. 2008-3 (May 20, 2008) | Electromagnetic immunity of broadcast receivers associated equipment |
| ECT-IMMUN | 12/KN24 | KN24 (December 2005) with RRL Notice No. 2005-83 | Information Technology Equipment - immunity charateristics - limits and methods of measurements |
| ECT-IMMUN | 12/KN24a | KN24 (December 2005) with RRL Notice No. 2006-127 | Information technology equipment – Immunity characteristics – Limits and methods of measurement |
| ECT-IMMUN | 12/KN24b | KN24 (Annex 11) with RRL Notice No. 2007-101 (Dec. 26, 2007) | Information Technology Equipment - immunity charateristics - limits and methods of measurements |
| ECT-IMMUN | 12/KN24c | KN 24 (2006-12-29) | Information Technology Equipment - immunity charateristics - limits and methods of measurements |
| ECT-IMMUN | 12/KN24d | KN 24 (2008-5) with RRL Notice No. 2008-4 (May 20, 2008) | Information Technology Equipment - immunity charateristics - limits and methods of measurements |
| ECT-IMMUN | 12/KN24d1 | KN 24 (Annex 11) RRA Announce 2008-12 (Dec. 16, 2008) | Conformity Assessment Procedure for EMS (Information technology equipment – Immunity characteristics – Limits and methods of measurement) |
| ECT-IMMUN | 12/KN2a | KN 61000-4-2 with RRL Notice No. 2005-130 (Dec. 27, 2005) | Electrostatic Discharge Immunity Test |
| ECT-IMMUN | 12/KN2b | KN 61000-4-2 (Annex 1);RRL Notice No. 2007-101(Dec. 26 2007) | Electrostatic Discharge Immunity Test |
| ECT-IMMUN | 12/KN2c | KN 61000-4-2 (2008-5); RRL Notice No. 2008-4 (May 20, 2008) | Electrostatic Discharge Immunity Test |
| ECT-IMMUN | 12/KN2d | KN 61000-4-2 (Annex 1);RRL Notice No. 2007-70 | Electrostatic Discharge Immunity Test |
| ECT-IMMUN | 12/KN2d1 | KN 61000-4-2 (Annex 1); RRA Announce 2008-12 (Dec. 16, 2008) | Conformity Assessment Precedure for EMS (Electrostatic Discharge Immunity Test) |
| ECT-IMMUN | 12/KN3 | KN 61000-4-3 with RRL Notice No. 2005-83 (Sept. 29, 2005) | Radiated, radio-frequency, electromagnetic field immunity test |
| ECT-IMMUN | 12/KN31 | Korea RRL Notice No. 31 (2004) | Conformity Assessment Procedures for Electromagnetic Susceptibility using KN 61000-4-2, KN 61000-4-3, KN 61000-4-4, KN 61000-4-5, KN 61000-4-8, KN 61000-4-11, KN 20, KN 41, and KN 50. |
| ECT-IMMUN | 12/KN3a | KN 61000-4-3 with RRL Notice No. 2005-130 (Dec. 27, 2005) | Radiated, radio-frequency, electromagnetic field immunity test |
| ECT-IMMUN | 12/KN3b | KN 61000-4-3 (Annex 2); RRL Notice No. 2007-101(Dec.26,2007) | Radiated, radio-frequency, electromagnetic field immunity test |
| ECT-IMMUN | 12/KN3c | KN 61000-4-3 (2008-5); RRL Notice No. 2008-4 (May 20, 2008) | Radiated, radio-frequency, electromagnetic field immunity test |
| ECT-IMMUN | 12/KN3c1 | KN 61000-4-3 (Annex 2) RRA Announce 2008-12 (Dec. 16, 2008) | Conformity Assessment Procedure for EMS (Radiated, radio-frequency, electromagnetic field immunity test) |
| ECT-IMMUN | 12/KN3d | KN 61000-4-3 with RRL Notice No. 2006-127 (Dec 29, 2006) | Radiated, radio-frequency, electromagnetic field immunity test |
| ECT-IMMUN | 12/KN4 | KN 61000-4-4 with RRL Notice No. 2005-83 (Sept. 29, 2005) | Electromagnetic compatibility (EMC): Testing and measurement techniques - Electrical Fast Transient/Burst Immunity Test |
| ECT-IMMUN | 12/KN4a | KN 61000-4-4 with RRL Notice No. 2005-130 (Dec. 27, 2005) | Electromagnetic compatibility (EMC): Testing and measurement techniques - Electrical Fast Transient/Burst Immun |
| ECT-IMMUN | 12/KN4b | KN 61000-4-4 (Annex 3); RRL No. 2007-101 (Dec. 26, 2007) | Electromagnetic compatibility (EMC): Testing and measurement techniques - Electrical Fast Transient/Burst Immunity Test |
| ECT-IMMUN | 12/KN4c | KN 61000-4-4 (2008-5); RRL Notice No. 2008-5 (May 20, 2008) | Electromagnetic compatibility (EMC): Testing and measurement techniques - Electrical Fast Transient/Burst Immunity Test |
| ECT-IMMUN | 12/KN4c1 | KN 61000-4-4 (Annex 3) RRA Announce 2008-12 (Dec. 16, 2008) | Conformity Assessment Procedure for EMS (Electrical Fast Transient/Burst test) |
| ECT-IMMUN | 12/KN4d | KN 61000-4-4 with RRL Notice No. 2006-127 (Dec 29, 2006) | Electromagnetic compatibility (EMC): Testing and measurement techniques - Electrical Fast Transient/Burst Immun |
| ECT-IMMUN | 12/KN5 | KN 61000-4-5 with RRL Notice No. 2005-83 (Sept. 29, 2005) | Surge Immunity Test |
| ECT-IMMUN | 12/KN5a | KN 61000-4-5 with RRL Notice No. 2005-130 (Dec. 27, 2005) | Surge Immunity Test |
| ECT-IMMUN | 12/KN5b | KN 61000-4-5 (Annex 4); RRL No. 2007-101 (Dec. 26, 2007) | Surge Immunity Test |
| ECT-IMMUN | 12/KN5c | KN 61000-4-5 (2008-5); RRL Notice No. 2008-4 (May 20, 2008) | Surge Immunity Test |
| ECT-IMMUN | 12/KN5c1 | KN 61000-4-5 (Annex 4) RRA Announce 2008-12 (Dec. 16, 2008) | Conformity Assessment Procedure for EMS (Surge Immunity Test) |
| ECT-IMMUN | 12/KN5d | KN 61000-4-5 with RRL Notice No. 2006-127 (Dec 29, 2006) | Surge Immunity Test |
| ECT-IMMUN | 12/KN6 | KN 61000-4-6 with RRL Notice No. 2005-83 (Sept. 29, 2005) | Electromagnetic compatibility (EMC): Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
| ECT-IMMUN | 12/KN6a | KN 61000-4-6 with RRL Notice No. 2005-130 (Dec. 27, 2005) | Electromagnetic compatibility (EMC): Testing and measurement techniques - Immunity to conducted disturbances, |
| ECT-IMMUN | 12/KN6b | KN 61000-4-6 (Annex 5); RRL No. 2007-101 (Dec. 26, 2007) | Electromagnetic compatibility (EMC): Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
| ECT-IMMUN | 12/KN6c | KN 61000-4-6 (2008-5); RRL Notice No. 2008-4 (May 20, 2008) | Electromagnetic compatibility (EMC): Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
| ECT-IMMUN | 12/KN6c1 | KN 61000-4-6 (Annex 5); RRA Announce 2008-12 (Dec. 16, 2008) | Conformity Assessment Procedure for EMS (Conducted disturbances, induced by radio-frequency fields test) |
| ECT-IMMUN | 12/KN6d | KN 61000-4-6 with RRL Notice No. 2006-127 (Dec 29, 2006) | Electromagnetic compatibility (EMC): Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
| ECT-IMMUN | 12/KN70 | Korea RRL Notice 70 (2004) | Technical Requirements for Electromagnetic Susceptibility using KN 61000-4-2, KN 61000-4-3, KN61000-4-4, KN 61000-4-5, KN 61000-4-6, KN 61000-4-8, KN 20, KN 41, and KN 51 |
| ECT-IMMUN | 12/KN8 | KN 61000-4-8 with RRL Notice No. 2005-83 (Sept. 29, 2005) | Power Frequency Magnetic Field Immunity Test |
| ECT-IMMUN | 12/KN8a | KN 61000-4-8 with RRL Notice No. 2005-130 (Dec. 27, 2005) | Power Frequency Magnetic Field Immunity Test |
| ECT-IMMUN | 12/KN8b | KN 61000-4-8 (Annex 6); RRL No. 2007-101 (Dec. 26, 2007) | Power Frequency Magnetic Field Immunity Test |
| ECT-IMMUN | 12/KN8c | KN 61000-4-8 (2008-5); RRL Notice No. 2008-4 (May 20, 2008) | Power Frequency Magnetic Field Immunity Test |
| ECT-IMMUN | 12/KN8c1 | KN 61000-4-8 (Annex 6) RRA Announce 2008-12 (Dec. 16, 2008) | Conformity Assessment Procedure for EMS (Power Frequency Magnetic Field Immunity Test) |
| ECT-IMMUN | 12/KN8d | KN 61000-4-8 with RRL Notice No. 2006-127 (Dec 29, 2006) | Power Frequency Magnetic Field Immunity Test |
| ECT-IMMUN | 12/Lloyd1 | Lloyd's Register - LR Type Approval System | Test Specification Number 1 (1996) |
| ECT-IMMUN | 12/Lloyd1a | Lloyds Register - | LR Type Approval System: Test Specification Number 1 (2002) [Clauses 21, 22, 23, 24, 25, 26, 27, 28, 29 and 30] |
| ECT-IMMUN | 12/M1275b | MIL-STD-1275B (November 20, 1997) | Characteristics of 28 Volt DC Electrical Systems in Military Vehicles |
| ECT-IMMUN | 12/N4232a | ANSI N42.32 (2007-01), Section 8.1 | American National Standard Performance Criteria for Alarming Personal Radiation Detectors for Homeland Security ; Section 8.1 - Electrostatic Discharge |
| ECT-IMMUN | 12/N4232b | ANSI N42.32 (2007-01), Section 8.2 | American National Standard Performance Criteria for Alarming Personal Radiation Detectors for Homeland Security , Section 8.2 - Radio Frequency |
| ECT-IMMUN | 12/N4232c | ANSI N42.32 (2007-01), Section 8.3 | American National Standard Performance Criteria for Alarming Personal Radiation Detectors for Homeland Security , Section 8.3 - Magnetic Fields |
| ECT-IMMUN | 12/N4233a | ANSI N42.33 (2007-01), Section 8.1 | American National Standard for Portable Radiation Detection Instrumentation for Homeland Security, Section 8.1 - ESD |
| ECT-IMMUN | 12/N4233b | ANSI N42.33 (2007-01), Section 8.2 | American National Standard for Portable Radiation Detection Instrumentation for Homeland Security, Section 8.2 - Radio Frequency |
| ECT-IMMUN | 12/N4233c | ANSI N42.33 (2007-01), Section 8.3 | American National Standard for Portable Radiation Detection Instrumentation for Homeland Security , Section 8.3 - Magnetic Fields |
| ECT-IMMUN | 12/N4233d | ANSI N42.33 (2007-01), Section 8.4 | American National Standard for Portable Radiation Detection Instrumentation for Homeland Security , Section 8.4 - Conducted Immunity |
| ECT-IMMUN | 12/N4234a | ANSI N42.34 (2007-01), Section 8.1 | American National Standard Performance Criteria for Hand-Held Instruments for the Detection and Identification of Radionuclides, Section 8.1 - ESD |
| ECT-IMMUN | 12/N4234b | ANSI N42.34 (2007-01), Section 8.2 | American National Standard Performance Criteria for Hand-Held Instruments for the Detection and Identification of Radionuclides, Section 8.2 - Radio Frequency Susceptibility |
| ECT-IMMUN | 12/N4234d | ANSI N42.34 (2007-01), Section 8.4 | American National Standard Performance Criteria for Hand-Held Instruments for the Detection and Identification of Radionuclides, Section 8.4 - Conducted Immunity |
| ECT-IMMUN | 12/N4234e | ANSI 42.34 (2007-01), Section 8.5 | American National Standard Performance Criteria for Hand-Held Instruments for the Detection and Identification of Radionuclides, Section 8.5 - Magnetic Fields |
| ECT-IMMUN | 12/N4235a | ANSI N42.35 (2007-01), Section 8.1 | American National Standard for Evaluation and Performance of Radiation Detection Portal Monitors for Use in Homeland Security , Section 8.1 - Radio Frequency (RF) |
| ECT-IMMUN | 12/N4235c | ANSI N42.35 (2007-01), Section 8.3 | American National Standard for Evaluation and Performance of Radiation Detection Portal Monitors for Use in Homeland Security, Section 8.3 - AC Line Voltage Operations |
| ECT-IMMUN | 12/N4235e | ANSI N42.35 (2007-01), Section 8.5 | American National Standard for Evaluation and Performance of Radiation Detection Portal Monitors for Use in Homeland Security, Section 8.5 - Electrostatic Discharge (ESD) |
| ECT-IMMUN | 12/N4235f | ANSI N42.35 (2007-01), Section 8.6 | American National Standard for Evaluation and Performance of Radiation Detection Portal Monitors for Use in Homeland Security, Section 8.6 - Conducted Disturbances Induced by Bursts and Radio Frequencies |
| ECT-IMMUN | 12/N4235g | ANSI N42.35 (2007-01), Section 8.7 | American National Standard for Evaluation and Performance of Radiation Detection Portal Monitors for Use in Homeland Security, Section 8.7 - Surges and Oscillatory Waves |
| ECT-IMMUN | 12/PC69 | ANSI/AAMI PC69:2000 | Active implantable medical devices - Electromagnetic compatibility: EMC test Protocols for Implatable cardiac pacemakers and implantable cardioverter devibrillators, 1 ed. |
| ECT-IMMUN | 12/PC69a | ANSI/AAMI PC69:2007; (Sections 4.8 and 4.9 only) | Active implantable medical devices - Electromagnetic compatibility: EMC test Protocols for Implatable cardiac pacemakers and implantable cardioverter devibrillators |
| ECT-IMMUN | 12/RRA0812 | RRA Notice 2008-12 (Dec. 16, 2008) | Conformity Assessment Procedure for Electronic Susceptibility (K only) |
| ECT-IMMUN | 12/RRL101 | RRL Notice No. 2007-101 (Dec. 26, 2007) | Conformity Assessment Procedure for Electromagnetic Susceptibility |
| ECT-PS | 12 T41c | EN 60950 (1992) and BS 7002 (1992) | Safety of information technology equipment, including electrical business equipment |
| ECT-PS | 12/065X01 | IEC 60065 Test Method Exclusion List | The following test methods identified by paragrpah number are excluded: 8.18, 10.1, 12.1.2, 12.3, 14.1 thru 14.6, 15.4, 16.3, 18, and Annex G |
| ECT-PS | 12/1010x01 | IEC 61010-1 Test Method Exclusion | The following test methods identified by paragraph number are excluded: 11.7 (Fluid Pressure and Leakage Test) and 12.5 (Sonic and Ultrasonic Pressure Test) |
| ECT-PS | 12/335X01 | IEC 60335-1 Test Method Exclusion List | The following test methods identified by paragraph are excluded: 15 (Moisture Resistance Tests) and 30.2 (Flame Tests for Plastic Parts). |
| ECT-PS | 12/41003 | EN 41003 (1998) | Particular safety requirements for equipment to be connected to telecommunications networks |
| ECT-PS | Dec-17 | AS/NZS 4117 (1999) | Surge protective devices for telecommunications applications |
| ECT-PS | 12/50075 | EN 50075:1990 | Flat Non-Wirable Two-Pole Plugs, 2,5 A 250 V, with Cord, for the Connection of Class II-Equipment for Household and Similar Purposes |
| ECT-PS | 12/50091b | EN 50091-2 (1995) | Uninterruptible power systems (UPS) - Part 2: EMC requirements |
| ECT-PS | 12/50392 | BS EN 50392 (2004) | Generic standard to demonstrate the compliance of electronic and electrical apparatus with the basic restrictions related to human exposure to electromagnetic fields (0 Hz - 300 GHz) |
| ECT-PS | 12/60034 | EN 60034-1:2004 | Rotating electrical machines. Part 1: Rating and performance |
| ECT-PS | 12/60061 | EN 60061-1:1993 | Lamp caps and holders together with gauges for the control of interchangeability and safety – Part 1: Lamp caps |
| ECT-PS | 12/600611 | IEC 60061-1:2007 | Lamp caps and holders together with gauges for the control of interchangeability and safety – Part 1: Lamp caps |
| ECT-PS | 12/60061a | EN 60061-2:1993 | Specification for lamp caps and holders together with gauges for the control of interchangeability and safety. Lampholders |
| ECT-PS | 12/60061a1 | IEC 60061-2:2005 | Specification for lamp caps and holders together with gauges for the control of interchangeability and safety. Lampholders |
| ECT-PS | 12/60061b | EN 60061-3:1993 | Specification for lamp caps and holders together with gauges for the control of interchangeability and safety. Gauges |
| ECT-PS | 12/60061b1 | IEC 60061-3:2005 | Specification for lamp caps and holders together with gauges for the control of interchangeability and safety. Gauges |
| ECT-PS | 12/60065 | IEC 60065 (2001-12), 7th edition | Audio, video and similar electronic apparatus - Safety requirements |
| ECT-PS | 12/60065a | EN 60065 (2002) | Audio, video and similar electronic apparatus. Safety requirements |
| ECT-PS | 12/60065a1 | EN 60065:2002 + A1:2006 | Audio, video and similar electronic apparatus. Safety requirements |
| ECT-PS | 12/60065b | UL 60065:2003 | Audio, video and similar electronic apparatus. Safety requirements |
| ECT-PS | 12/60065c | IEC 60065, Ed. 7.1 (2005-12) | Audio, video and similar electronic apparatus - Safety requirements |
| ECT-PS | 12/60065d | AS/NZS 60065:2003 | Audio.video and similar electronic apparatus - Safety requirements |
| ECT-PS | 12/60065e | K60065:2005 | Audio, video and similar electronic apparatus - Safety requirements |
| ECT-PS | 12/60086 | BS EN 60086-1:2007 | Primary batteries. Part 1: General |
| ECT-PS | 12/60086a | EN 60086-2:2007 | Primary batteries – Part 2: Physical and electrical specifications |
| ECT-PS | 12/60086b | EN 60086-4:2007 | Primary batteries - Part 4: Safety of lithium batteries |
| ECT-PS | 12/60086c | IEC 60086-4 Ed. 3.0 (2007) | Primary batteries - Part 4: Safety of lithium batteries |
| ECT-PS | 12/601a | IEC 601-1 (1988), 2nd edition | Medical electrical equipment - Part 1: General requirements for safety |
| ECT-PS | 12/601b | IEC 601-1 (1988), Amendment 2 (1995-03) | Medical electrical equipment - Part 1: General requirements for safety |
| ECT-PS | 12/60204 | EN 60204-1:2006 | Safety of machinery. Electrical equipment of machines. General requirements |
| ECT-PS | 12/60335 | EN/UL/CSA 60335-1 (2002) | Household and similar electrical appliances - Safety - Part 1: General Requirements |
| ECT-PS | 12/60335b | EN 60335-1 (2002) | Household and similar electrical appliances - Safety - Part 1: General Requirements |
| ECT-PS | 12/60335bb | EN 60335-1 (2006) | Household and similar electrical appliances - Safety - Part 1: General Requirements |
| ECT-PS | 12/60335bc | SNZ AS/NZS 60335.1 (2002) | Household and similar electrical appliances – Safety – Part 1: General requirements |
| ECT-PS | 12/60335bd | AS/NZS 60335.2.29 (2004) | Safety of household and similar electrical appliances. Part 2.29: Particular requirements - Battery chargers |
| ECT-PS | 12/60335c | EN 606335-2-29 (2004) | Household and similar electrical appliances - Safety - Part 2-29: Particular requirements for battery chargers |
| ECT-PS | 12/60335c1 | IEC 60335-2-29 (2004) | Household and similar electrical appliances – Safety – Part 2-29: Particular requirements for battery chargers |
| ECT-PS | 12/60335d | IEC 60335-2-43, 3rd Ed. (2002-10) | Household and similar electrical appliances - Safety - Part 2-43: Particular requirements for clothes dryers and towel rails |
| ECT-PS | 12/60335e | IEC 60335-2-89, 1st Ed. (2002-05) | Household and similar electrical appliances - Safety - Part 2-89: Particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant condensing unit or compressor |
| ECT-PS | 12/60335f | EN 60335-2-9:2003 + A1:2004 +A2:2006 +A12:2007 | Household and similar electrical appliances - Safety - Part 2-9: Particular requirements for grills, toasters and similar portable cooking appliances |
| ECT-PS | 12/60335g | EN 60335-2-24:2003 + A11:2004 + A1:2005 + A2:2007 | Household and similar electrical appliances - Safety - Part 2-24: Particular requirements for refridgerating appliances, ice cream appliances and ice makers |
| ECT-PS | 12/60335h | EN 60335-2-102:2006 | Household and similar electrical appliances - Safety - Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections. |
| ECT-PS | 12/60335i | IEC 60335-2-14:2008 | Household and similar electrical appliances - Safety - Part 2-14: Particular requirements for kitchen machines |
| ECT-PS | 12/60335ia | EN 60335-2-14:2006 | Household and similar electrical appliances. Safety. Particular requirements for kitchen machines |
| ECT-PS | 12/60335j | IEC 60335-2-23:2008 | Household and similar electrical appliances – Safety – Part 2-23: Particular requirements for appliances for skin or hair care |
| ECT-PS | 12/60335ja | EN 60335-2-23:2003 | Specification for safety of household and similar electrical appliances. Particular requirements for appliances for skin or hair care |
| ECT-PS | 12/60335k | IEC 60335-2-47-am1 Ed. 4.0 (2008) | Amendment 1 - Household and similar electrical appliances - Safety - Part 2-47: Particular requirements for commercial electric boiling pans |
| ECT-PS | 12/60335ka | EN 60335-2-47:1997 | Specification for safety of household and similar electrical appliances. Part 2-47: Particular requirements for commercial electric boiling pans |
| ECT-PS | 12/60335l | IEC 60335-2-33:2006 | Safety of household and similar electrical appliances. Particular requirements. Coffee mills and coffee grinders |
| ECT-PS | 12/60335la | EN 60335-2-33:1990 | Safety of Household and Similar Electrical Appliances Part 2-33: Particular Requirements for Coffee Mills and Coffee Grinders |
| ECT-PS | 12/60335m | IEC 60335-2-21 Amd.1 Ed. 5.0 (2004) | Amendment 1 - Household and similar electrical appliances - Safety - Part 2-21: Particular requirements for storage water heaters |
| ECT-PS | 12/60335ma | EN 60335-2-21:2003 | Specification for safety of household and similar electrical appliances. Particular requirements. Part 2-21: Particular requirements for storage water heaters |
| ECT-PS | 12/60335n | IEC 60335-2-80 (2008) | Household and similar electrical appliances - Safety - Part 2-80: Particular requirements for fans |
| ECT-PS | 12/60335na | EN 60335-2-80:2003 | Household and similar electrical appliances. Safety. Part 2-80: Particular requirements for fans |
| ECT-PS | 12/60335p | IEC 60335-2-25 (2006) | Household and similar electrical appliances - Safety - Part 2-25: Particular requirements for microwave ovens, including combination microwave ovens |
| ECT-PS | 12/60335pa | EN 60335-2-25:2002 | Specification for safety of household and similar electrical appliances. Particular requirements. Part 2-25: Particular requirements for microwave ovens, including combination microwave ovens |
| ECT-PS | 12/60335q | IEC 60335-2-75 Amd.1 Ed. 2.0 (2005) | Amendment 1 - Household and similar electrical appliances - Safety - Part 2-75: Particular requirements for commercial dispensing appliances and vending machines |
| ECT-PS | 12/60335qa | EN 60335-2-75:2004 | Specification for safety of household and similar electrical appliances. Part 2-75: Particular requirements for commercial dispensing appliances and vending machines |
| ECT-PS | 12/6035a | EN 60335, 4th Ed. (2001): | Household and similar electrical appliances- Safety Part 1: General Requirements |
| ECT-PS | 12/60529 | EN 60529:1992 Degrees of Protection by enclosures (IP code) | European Norm EN 60529:1991-10 Degrees of Protection by enclosures (IP code) Accreditation applies only to specific test methods (refer to IEC 60950-1 note in product safety field) |
| ECT-PS | 12/60529a | IEC 60529, Edition 2.1 | IEC 60529:1989+A1:1999, Edition 2 with Amendment 1. Degrees of Protection by enclosures (IP code) Accreditation applies only to specific test methods (refer to IEC 60950-1 note in product safety field) |
| ECT-PS | 12/60529b | AS 60529:2004 | Australian Standard AS 60529:2004 Degrees of Protection by enclosures (IP Code) Accreditation applies only to specific test methods (refer to IEC 60950-1 note in product safety field) |
| ECT-PS | 12/60529c | IEC 60529 Ed. 2.1 (2001) | Degrees of protection provided by enclosures (IP Code) |
| ECT-PS | 12/60529d | EN 60529:1991 | Degrees of protection provided by enclosures (IP Code) |
| ECT-PS | 12/60598 | IEC 60598-1, Ed. 6 (2003) + A1 (2006) | Luminaires -- Part 1: General requirements and tests |
| ECT-PS | 12/60598a | AS/NZS 60598.1 (2003) | Luminaires -- Part 1: General requirements and tests |
| ECT-PS | 12/60598b | AS/NZS 60598.2.1 (1998) | Luminaires Part 2.1: Particular Requirements - Fixed General Purpose Luminaires |
| ECT-PS | 12/60598ba | EN 60598-2-1:1989 | Luminaires Part 2: Particular Requirements Section One - Fixed General Purpose Luminaires |
| ECT-PS | 12/60598c | AS/NZS 60598.2.4 (2005) | Luminaires Part 2: Particular Requirements - Portable General Purpose Luminaires |
| ECT-PS | 12/60598ca | EN 60598-2-4:1997 | Luminaires Part 2: Particular Requirements - Part 4: Portable General Purpose Luminaires |
| ECT-PS | 12/60598d | EN 60598-2-17:1989 | Luminaires - Part 2: Particular requirements. Section 17: Specification for luminaires for stage lighting, television, film and photographic studios (outside and indoor) |
| ECT-PS | 12/60598d1 | IEC 60598-2-17:1984 + A2:1990 | Luminaires - Part 2: Particular requirements. Section 17: Specification for luminaires for stage lighting, television, film and photographic studios (outside and indoor) |
| ECT-PS | 12/60598d2 | AS/NZS 60598.2.17:2006 | Luminaires - Part 2: Particular requirements. Section 17: Specification for luminaires for stage lighting, television, film and photographic studios (outside and indoor) |
| ECT-PS | 12/60598e | EN 60598-2-20:1998 | Luminaires. Particular requirements. Lighting chains |
| ECT-PS | 12/60598e1 | IEC 60598-2-20:2002 + A2:2002 | Luminaires. Particular requirements. Lighting chains |
| ECT-PS | 12/60598e2 | AS/NZS 60598.2.20:2002 | Luminaires. Particular requirements. Lighting chains |
| ECT-PS | 12/60598f | IEC 60598-2-3:2002 | Luminaires – Part 2-3: Particular requirements – Luminaires for road and street lighting |
| ECT-PS | 12/60598fa | EN 60598-2-3:2003 | Luminaires. Particular requirements. Luminaires for road and street lighting |
| ECT-PS | 12/60598g | IEC 60598-2-6 Ed. 2.0 (1994) | Luminaires - Part 2: Particular requirements - Section 6: Luminaires with built-in transformers for filament lamps |
| ECT-PS | 12/60598g1 | IEC 60598-2-6:1994 + A1:1996 | Luminaires - Part 2: Particular requirements - Section 6: Luminaires with built-in transformers for filament lamps |
| ECT-PS | 12/60598g2 | AS/NZS 60598.2.6:1998 | Luminaries Part 2.6: Particular requirements - Luminaires with built-in transformers or convertors for filament lamps |
| ECT-PS | 12/60598ga | EN 60598-2-6:1994 | Luminaires. Particular requirements. Luminaires with built-in transformers for filament lamps |
| ECT-PS | 12/60598h | IEC 60598-2-12 (2006) | Luminaires - Part 2-12: Particular requirements - Mains socket-outlet mounted nightlights |
| ECT-PS | 12/60598ha | EN 60598-2-12:2006 | Luminaires. Part 2-12: Particular requirements. Mains socket-outlet mounted nightlights |
| ECT-PS | 12/60598j | IEC 60598-1 (2008) | Luminaires – Part 1: General requirements and tests |
| ECT-PS | 12/606010 | IEC 60601-2-10(1987)+A1(2001); EN 60601-2-10(2000)+A1(2001) | Medical electrical equipment – Part 2-10: Particular requirements for the safety of nerve and muscle stimulators |
| ECT-PS | 12/606011 | IEC 60601-1-2, Ed. 2.0 (2001) + A1 (2004) | Medical electrical equipment - Part 1-2: General requirements for safety - Collateral standard: Electromagnetic compatibility - Requirements and tests |
| ECT-PS | 12/60601a | IEC 60601-1-2, Ed1(1993);Ed2(2001-09); JIS T0601-1-2(2002.7) | Medical electrical equipment - Part 1 and Part 1-2: General requirements for safety: Collateral standard: EMC - Requirements and tests |
| ECT-PS | 12/60601aa | IEC 60601-1-2, Ed 2.1 (2004-11) & EN 60601-1-2 (2002) | Medical electrical equipment - Part 1-2: General requirements for safety - Collateral standard: Electromagnetic compatibility - Requirements and tests |
| ECT-PS | 12/60601ab | IEC 60601-1-2, Ed. 3.0 (2007) | Medical electrical equipment - Part 1-2: General requirements for safety - Collateral standard: Electromagnetic compatibility - Requirements and tests |
| ECT-PS | 12/60601ac | KN 60601-1-2 (2008-5); RRL Notice No. 2008-4 (May 20, 2008) | Medical electrical equipment - Part 1-2: general requirements for safety - collateral standard: electromagnetic compatibility - requirements and tests |
| ECT-PS | 12/60601b | IEC 60601-2-2, Ed. 3 (1998) | Medical electrical equipment - Part 2-2, Particular requirements for the safety of high frequency surgical equipment |
| ECT-PS | 12/60601bb | IEC 60601-2-2 Ed. 4.0 (2006) | Medical electrical equipment - Part 2-2, Particular requirements for the safety of high frequency surgical equipment |
| ECT-PS | 12/60601c | IEC 60601-2-18, Ed. 2 (1996) | Medical electrical equipment - Part 2: Particular requirements for the safety of endoscopic equipment |
| ECT-PS | 12/60601d | IEC 60601-2-37, Ed. 1 (2001) | Medical electrical equipment - Part 2-37: Particular requirements for the safety of ultrasonic medical diagnostic and monitoring equipment |
| ECT-PS | 12/60601dd | IEC 60601-2-37, Ed. 2.0 (2007-08) | Medical electrical equipment - Part 2-37: Particular requirements for the safety of ultrasonic medical diagnostic and monitoring equipment |
| ECT-PS | 12/60601e | IEC 60601-1-1 (2000-12), 2nd edition | Medical electrical equipment - Part 1-1: General requirements for safety - Collateral standard: Safety requirements for medical electrical systems |
| ECT-PS | 12/60601f | EN 60601-2-24 (1994) | Medical electrical equipment Part 2-24: Particular requirements for the safety of infusion pumps and controllers |
| ECT-PS | 12/60601g | EN 60601-1-1(1993), IEC 601-1-1(1992); BS 5724 Sec 1.1(1992) | Medical electrical equipment - Part 1. General requirements for safety - Section 1.1 Collateral standard: Safety requirements for medical electrical systems |
| ECT-PS | 12/60601h | EN 60601-1-2 (2001) | Medical electrical equipment - Part 1 and Part 1-2: General requirements for safety: Collateral standard: EMC - Requirements and tests |
| ECT-PS | 12/60601h1 | EN 60601-1-2 (2007) | Medical electrical equipment - Part 1-2: General requirements for safety - Collateral standard: EMC - Requirements and tests |
| ECT-PS | 12/60601hh | EN 60601-1-2 (2001) + A1(2006) | Medical electrical equipment - Part 1-2: General requirements for safety - Collateral standard: EMC - Requirements and tests |
| ECT-PS | 12/60601i | IEC 60601-2-4:2005; EN 60601-2-4:2003 | Particular requirments for the safety of cardiac defribrillators |
| ECT-PS | 12/60601j | IEC 60601-2-12:2001 | Particular requirments for the safety of lung ventilators - Critical Care Ventilators |
| ECT-PS | 12/60601k | IEC 60601-2-25:1993 + A1:1999, EN 60601-2-25:1993 + A1:1999 | Particular requirments for the safety of electrocardiographs |
| ECT-PS | 12/60601l | IEC 60601-2-27:2005 | Particular requirments for the safety, including essential performance, of automatic cycling non-invasive blood pressure monitoring equipment |
| ECT-PS | 12/60601m | IEC 60601-2-30:1999, EN 60601-2-30:2000 | Particular requirements for the safety including essential performance, of automatic cycling non-invasive blood pressure monitoring equipment |
| ECT-PS | 12/60601n | IEC 60601-2-31:1994 + A1:1998, EN 60601-2-31:1995 + A1:1998 | Particular requirements for the safety of external cardiac pacemakers with internal power source. |
| ECT-PS | 12/60601o | IEC 60601-2-34:2000, EN 60601-2-34:2001 | Particular requirements for the safety, including essential performance, of invasive blood pressure monitoring equipment |
| ECT-PS | 12/60601p | IEC 60601-2-38:1996 + A1:1999, EN 60601-2-38:1996 + A1:2000 | Particular requirements for the safety of electrically operated hospital beds |
| ECT-PS | 12/60601q | IEC 60601-2-47:2006, EN 60601-2-47:2001 | Particular requirements for the safety, including essential performance, of ambulatory electrocardiographic systems |
| ECT-PS | 12/60601r | IEC 60601-2-49:2006, EN 60601-2-49:2001 | Particular requirements for the safety of multifunction patient monitoring equipment |
| ECT-PS | 12/60601s | IEC 60601-2-24, Ed. 1 (1998) | Medical electrical equipment - Part 2-24: Particular requirements for the safety of infusion pumps and controllers |
| ECT-PS | 12/60601t | EN 60601-2-24 (1998) | Medical electronic equipment Part 2-24: Particular requirements for the safety of infusion pumps and controllers |
| ECT-PS | 12/60601tt | EN 60601-2-24 (1998); (Section 36 only) | Medical electronic equipment Part 2-24: Particular requirements for the safety of infusion pumps and controllers |
| ECT-PS | 12/60601u | IEC 60601-2-37 (2001) + A1 (2004) + A2 (2005) | Medical electrical equipment - Part 2-37: Particular requirements for the safety of ultrasonic medical diagnostic and monitoring equipment |
| ECT-PS | 12/60601v | EN 60601-2-37 (2001) + A1 (2004) + A2 (2005) | Medical electrical equipment - Part 2-37: Particular requirements for the safety of ultrasonic medical diagnostic and monitoring equipment |
| ECT-PS | 12/60601v1 | EN 60601-2-37 (2008) | Medical electrical equipment - Part 2-37: Particular requirements for the safety of ultrasonic medical diagnostic and monitoring equipment |
| ECT-PS | 12/60601w | EN 60601-2-2 (2001) | Medical electrical equipment - Part 2-2, Particular requirements for the safety of high frequency surgical equipment |
| ECT-PS | 12/60601ww | EN 60601-2-2 (2007) | Medical electrical equipment - Part 2-2, Particular requirements for the safety of high frequency surgical equipment |
| ECT-PS | 12/60601x | IEC 60601-2-18, Ed. 2 (1996), + A1 (2000) | Medical electrical equipment - Part 2: Particular requirements for the safety of endoscopic equipment |
| ECT-PS | 12/60601y | IEC 60601-2-26 (2003); EN 60601-2-26 (2003) | Medical Electrical Equipment Part 2-26: Particular Requirements for the Safety of Electroencephalographs |
| ECT-PS | 12/60601z | IEC 60601-2-40 (1998); EN 60601-2-40 (1998) | Medical electrical equipment. Particular requirements for safety. Specification for electromyographs and evoked response equipment |
| ECT-PS | 12/60611 | IEC 60601-1, 3rd Ed. (2005) | Medical electrical equipment - Part 1: General requirements for basic safety and essential performance |
| ECT-PS | 12/60669c | IEC 60669-1, Ed. 3.2 (2007) | Switches for household and similar fixed-electrical installations – Part 1: General requirements |
| ECT-PS | 12/60669d | IEC 60669-2-1, 4th Ed. (2002) | Switches for household and similar fixed electrical installations – Part 2-1: Particular requirements – Electronic switches |
| ECT-PS | 12/60687 | IEC 60687 (1992) | Alternating current static watt-hour meters for active energy (classes 0,2 S and 0,5 S) |
| ECT-PS | 12/60728 | IEC 60728-11 Second Edition, 2005-01 | Cable networks for television signals, sound signals and interactive - Part 11: Safety |
| ECT-PS | 12/60730 | IEC 60730-1, Third edition (1999-04) | Automatic electrical controls for household and similar use - Part 1: General requirements |
| ECT-PS | 12/60730a | IEC 60730-1 Ed. 3.2 (2007) | Automatic electrical controls for household and similar use - Part 1: General requirements |
| ECT-PS | 12/60730b | IEC 60730-2-7 Ed. 2.0 (2008) | Automatic electrical controls for household and similar use - Part 2-7: Particular requirements for timers and time switches |
| ECT-PS | 12/60825 | EN 60825-1:2007 | Safety of laser products - Part 1: Equipment classification and requirements |
| ECT-PS | 12/60950 | EN 60950-21 (2003) | Information technology equipment Safety Part 21: Remote power feeding |
| ECT-PS | 12/60950a | EN 60950-23 (2006) | Information technology equipment — Safety — Part 23: Large data storage equipment |
| ECT-PS | 12/60950b | EN 60950-22 (2006) | Information technology equipment - Safety - Part 22: Equipment installed outdoors |
| ECT-PS | 12/60968 | IEC 60968 (1999) | Self-ballasted lamps for general lighting services – Safety requirements |
| ECT-PS | 12/60968a | AS/NZS 60968 (2001) | Self-ballasted lamps for general lighting services – Safety requirements |
| ECT-PS | 12/60968b | EN 60968:2000 | Self-ballasted lamps for general lighting services. Safety requirements |
| ECT-PS | 12/60969 | EN 60969:1993 | Self-ballasted lamps for general lighting services. Performance requirements |
| ECT-PS | 12/60969a | IEC 60969 Ed. 1.2 (2001) | Self-ballasted lamps for general lighting services - Performance requirements |
| ECT-PS | 12/60974 | IEC 60974-10, Ed 2 (2007) | Electromagnetic compatibility (EMC) - Part 10: Electromagnetic compatibility (EMC) requirements for Arc welding equipment |
| ECT-PS | 12/61010a | IEC 61010-1 (2001-02), 2nd edition | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements |
| ECT-PS | 12/61010b | EN 61010-1 (2001) | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements |
| ECT-PS | 12/61036 | IEC 61036 (1996) | Alternating Current Static Watt-Hour Meters for Active Energy (Classes 1 and 2) |
| ECT-PS | 12/61268 | IEC 61268 (1996) | Alternating current static var-hour meters for reactive energy (classes 2 and 3) |
| ECT-PS | 12/61326 | IEC 61326 (1997) + Amendment A1 (1998) | Electrical equipment for measurement, control and laboratory use - EMC requirements |
| ECT-PS | 12/61326a | EN 61326 (1997), A1 (1998), A2 (2001) | Electrical equipment for measurement, control and laboratory use - EMC requirements |
| ECT-PS | 12/61326b | IEC 61326, Ed. 2 (2002-02) | Electrical equipment for measurement, control and laboratory use - EMC requirements |
| ECT-PS | 12/61326c | BS EN 61326 (1998) and IEC 61326 (1997) | Electrical equipment for measurement, control and laboratory use - EMC requirements |
| ECT-PS | 12/61347 | EN 61347-1:2001 | Lamp controlgear. Part 1: General and safety requirements |
| ECT-PS | 12/61347a | EN 61347-2-11:2002 | Lamp controlgear. Part 2-11: Particular requirements for miscellaneous electronic circuits used with luminaires |
| ECT-PS | 12/61347b | IEC 61347-2-13:2006 | Lamp controlgear - Part 2-13: Particular requirements for D.C. or A.C. supplied electronic controlgear for LED modules |
| ECT-PS | 12/61347c | AS/NZS 61347.2.3:2004 | Lamp controlgear. Part 2.3: Particular requirements for a.c. supplied electronic ballasts for fluorescent lamps |
| ECT-PS | 12/61347ca | EN 61347-2-3:2001 | Lamp controlgear. Part 2-3: Particular requirements for a.c. supplied electronic ballasts for fluorescent lamps |
| ECT-PS | 12/61347cb | IEC 61347-2-3 Ed. 1.1 (2004) | Lamp controlgear - Part 2-3: Particular requirements for a.c. supplied electronic ballasts for fluorescent lamps |
| ECT-PS | 12/61347d | AS/NZS 61347.1:2002 | Lamp controlgear Part 1: General and safety requirements |
| ECT-PS | 12/61347e | AS/NZS 61347.2.2:2007 | Lamp controlgear Part 2.2: Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps |
| ECT-PS | 12/61347ea | EN 61347-2-2:2001 | Lamp controlgear. Part 2-2: Particular requirements for d.c or a.c. supplied electronic step-down convertors for filament lamps |
| ECT-PS | 12/61347eb | IEC 61347-2-2 Ed. 1.2 (2006) | Lamp controlgear - Part 2-2: Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps |
| ECT-PS | 12/61558a | IEC 61558-1, Edition 1.1 (1998-07) | Safety of power transformers, power supply units and similar - Part 1: General requirements and tests |
| ECT-PS | 12/61558b | IEC 61558-2-6, First edition (1997-02) | Safety of power transformers, power supply units and similar - Part 2: Particular requirements for safety isolating transformers for general use |
| ECT-PS | 12/61558ba | EN 61558-2-6:1997 | Safety of power transformers, power supply units and similar. Part 2-6: Particular requirements for safety isolating transformers for general use |
| ECT-PS | 12/61558c | IEC 61558-1:2005 | Safety of power transformers, power supplies, reactors and similar products - Part 1: General requirements and tests |
| ECT-PS | 12/61558ca | EN 61558-1:2005 | Safety of power transformers, power supplies, reactors and similar products. Part 1: General requirements and tests |
| ECT-PS | 12/62040a | IEC 62040-1-1:2004 | Uninterruptible power systems (UPS) - Part 1-1: General and safety requirements for UPS used in operator access areas |
| ECT-PS | 12/62040b | EN 62040-1-1:2003 | Uninterruptible power systems (UPS) - Part 1-1: General and safety requirements for UPS used in operator access areas |
| ECT-PS | 12/62053a | IEC 62053-21, 1st Edition (2003-01) | Electricity metering equipment (a.c.)-Particular requirements -Part 21: Static meters for active energy (classes 1 and 2) |
| ECT-PS | 12/62053b | IEC 62053-22, 1st Edition (2003-01) | Electricity metering equipment (a.c.) – Particular requirements – Part 22: Static meters for active energy (classes 0,2 S and 0,5 S) |
| ECT-PS | 12/62053c | IEC 62053-23, First Edition (2003-01) | Electricity metering equipment (a.c.) – Particular requirements – Part 23: Static meters for reactive energy (classes 2 and 3) |
| ECT-PS | 12/62115 | EN 62115:2005 | Safety standard for Electric Toys |
| ECT-PS | 12/73027 | IEC 730-2-7, First edition (1990-10) | Automatic electrical controls for household and similar use - Part 2: Particular requirements for timers and time switches |
| ECT-PS | 12/95021 | UL 60950-21 (2003) | Information Technology Equipment - Safety - Part 21: Remote Power Feeding |
| ECT-PS | 12/95023 | IEC 60950-23, First Edition, 2005-09 | Information technology equipment - Safety - Part 23: Large data storage equipment |
| ECT-PS | 12/950X01 | IEC 60950-1 Test Method Exclusion List | The following test methods contained in IEC 60950-1 and associated standards are excluded from the scope of acreditation: UV Exposure (Clauses 4.3.13.3 and 4.3.13.4), Annex A Flammability, Annex H Ionizing Radiation, and Annex K Thermostat. |
| ECT-PS | 12/950X02 | IEC 60950-1 Test Method Exclusion List | The following Test Methods referenced by paragraph number are excluded: 2.8.7.3, 4.3.5, 4.3.12, 4.3.13.3, 4.3.13.4, 6.4, 7.3.2, and Annex A. |
| ECT-PS | 12/950X03 | IEC/EN 60950-1 Test Method Inclusion List | Marking durability, protection against access, heating, humidity resistance, distance through insulation, thermal, leakage current, dielectric withstand, and mechanical strength. Clauses 6 and 7 are excluded (telephone network connection). |
| ECT-PS | 12/C121 | ANSI C12.1 (2001) | Electric Meters Code for Electricity Metering (Only Sections 4.7.2.6, 4.7.2.13, 4.7.3.1, 4.7.3.2, 4.7.3.3, 4.7.3.4, 4.7.3.5, 4.7.3.9, 4.7.3.10, 4.7.3.11, 4.7.3.12, 4.7.3.13, 4.7.3.14, 4.7.3.16, 4.7.3.17) |
| ECT-PS | 12/C121a | ANSI C12.1 (2001); (Section 4.7.3.12.1 only) | Electric Meters Code for Electricity Metering |
| ECT-PS | 12/C1220 | ANSI C12.20 (2002) | Electricity Meters—0.2 and 0.5 Accuracy Classes (Only Sections 5.5.2.6, 5.5.2.13, 5.5.3.2, 5.5.3.3, 5.5.3.4, 5.5.3.5, 5.5.3.6, 5.5.3.10, 5.5.3.11, 5.5.3.12, 5.5.3.13, 5.5.3.14, 5.5.3.15, 5.5.3.17, 5.5.3.18) |
| ECT-PS | 12/CSA01 | CAN/CSA C22.2 No. 1010.1 | Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use, Part 1: General Requirements |
| ECT-PS | 12/CSA02 | CSA C22.2 No. 1 | Audio, Video, and Similar Electronic Equipment |
| ECT-PS | 12/CSA03 | CAN/CSA E60065 | Audio, Video and Similar Electronic Apparatus - Safety Requirements |
| ECT-PS | 12/CSA04 | CAN/CSA -22.2 No. 60065-3 (1st Ed.) | Audio, video and similar electronic apparatus. Safety requirements |
| ECT-PS | 12/I11a | EN 50083-1 (1993) | Cable networks for TV signals, sound signals and interactive services. Part 1. Safety + A2 |
| ECT-PS | 12/K60950 | K60950-1 Information technology equipment - Safety - Part 1: | Information technology equipment - Safety - Part 1: General (contact laboratory representative for specific test methods) |
| ECT-PS | 12/KRs1 | RRL Notice No. 2004-42 (June 10, 2004) | Conformity Assessment Procedure for Type Approval of Telecommunications Terminal Equipment, Appendix 4: Electrical Safety Test Methods |
| ECT-PS | 12/N4235d | ANSI N42.35 (2007-01), Section 8.4 | American National Standard for Evaluation and Performance of Radiation Detection Portal Monitors for Use in Homeland Security, Section 8.4 - Battery Lifetime |
| ECT-PS | 12/T41 | AC/ACIF S001 (2001) | Safety Requirements for Customer Equipment |
| ECT-PS | 12/T41a | AS/NZS 60950 (2000) | Safety of Information Technology Equipment (including Amdt1) |
| ECT-PS | 12/T41b | IEC 60950 (1994-04), 3rd edition | Safety of information technology equipment |
| ECT-PS | 12/T41c | EN 60950 (1992) and BS 7002 (1992) | Safety of information technology equipment, including electrical business equipment |
| ECT-PS | 12/T41d | ANSI/UL 60950-2000 and CAN/CSA-C22.22 No. 60950-00 | Safety of Information Technology Equipment |
| ECT-PS | 12/T41e | EN 60950-1, IEC 60950-1 & UL 60950-1 (1st edition): (2001) | Information technology equipment - Safety - Part 1: General requirements |
| ECT-PS | 12/T41f | ANSI/UL 60950-1 (2003) and CAN/CSA 22.2 No. 60950-1 | Safety of Information Technology Equipment |
| ECT-PS | 12/T41g | EN 60950 (2000) | Safety of information technology equipment |
| ECT-PS | 12/T41h | UL 60950-1 (2003) | Safety- Part 1- General Requirements For Information Technology Equipment |
| ECT-PS | 12/T41i | EN 60950-1 (2006), IEC 60950-1 (2005) & UL 60950-1 | Information technology equipment - Safety - Part 1: General requirements |
| ECT-PS | 12/T50 | AS/NZS 3260 (1993) + Supplement 1 (1996) | Safety of Information Technology Equipment Including Electrical Business Equipment |
| ECT-PS | 12/T50a | AS/NZ 60950 (2000) | Safety of information technology equipment |
| ECT-PS | 12/T50b | AS/NZS 60950.1 (2003) | Information technology equipment - Safety - Part 1: General requirements (IEC 60950-1: 2001, MOD) |
| ECT-PS | 12/T50c | AS/NZS 60950.1 (2003) + A1 (2006) | Information technology equipment - Safety - Part 1: General Requirements |
| ECT-PS | 12/UL01 | UL 61010A-1 | Standard for Electrical Equipment for Laboratory Use; Part 1: General Requirements |
| ECT-PS | UL02 | UL 61010B-1 | Electrical Measuring and Test Equipment; Part 1: General Requirements |
| ECT-PS | UL03 | UL 61010C-1 | Standard for Process Control Equipment |
| ECT-PS | UL04 | UL 1419 | Standard for Professional Video and Audio Equipment |
| ECT-PS | UL05 | UL 6500 | Standard for Audio/Video and Musical Instrument Apparatus for Household, Commercial, and Similar General use |
| ECT-RADIO | 12/300086 | ETSI EN 300 086-2 v1.1.1 (2001-03) | ERM; Land Mobile Service; Radio equipment with an internal or external RF connector intended primarily for analogue speech; Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE |
| ECT-RADIO | 12/300086a | ETSI EN 300 086-1 V1.3.1 (2008-07) | ERM; Land Mobile Service; Radio equipment with internal or external RF connector intended primarily for analogue speech; Part 1: Technical characteristics and methods of measurement |
| ECT-RADIO | 12/300113 | ETSI EN 300 113-2 v1.3.1 (2003-07) | Radio equipment intended for the transmission of data using constant or non-constant envelope modulation and having an antenna connector; Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive |
| ECT-RADIO | 12/300197 | ETSI EN 300 197 v1.6.1 (2002-07) | Fixed Radio Systems; Point-to-point equipment; Parameters for radio systems for the transmission of digital signals operating at 32 GHz and 38 GHz |
| ECT-RADIO | 12/300198 | ETSI EN 300 198 v1.5.1 (2002-07) | Fixed Radio Systems; Point-to-point equipment; Parameters for radio systems for the transmission of digital signals operating at 23 GHz |
| ECT-RADIO | 12/300219 | ETSI EN 300 219-1 v1.2.1 (2001-03) | Electromagnetic compatibility and Radio spectrum Matters (ERM); Land Mobile Service; Radio equipment transmitting signals to initiate a specific response in the receiver; Part 1: Technical characteristics and methods of measurement |
| ECT-RADIO | 12/300219b | ETSI EN 300 219-2, v1.1.1 (2001-03) | ERM; Land Mobile Service; Radio equipment transmitting signals to initiate a specific response in the receiver; Part 2: Harmonized EN covering essential requirements under Article 3.2 of the R&TTE Directive |
| ECT-RADIO | 12/300220a | EN 300 220-1 V1.3.1 (2000-09) | Electromagnetic compatibility and Radio spectrum Matters; Short Range Devices; Radio equipment to be used in the 25 MHz to 1,000 MHz frequency range with power levels ranging up to 500 mW; Part 1: Technical characteristics and test methods |
| ECT-RADIO | 12/300220b | ETSI EN 300 220-2 v1.3.1 (2000-09) | ERM; Short Range Devices; Radio equipment to be used in the 25 MHz to 1,000 MHz frequency range with power levels ranging up to 550 mW; Part 2: Supplementary parameters not intended for conformity purposes |
| ECT-RADIO | 12/300220c | EN 300 220-3 V1.1.1 (2000-09) | ERM; Short Range Devices; Radio equipment to be used in the 25 MHz to 1,000 MHz frequency range with power levels ranging up to 500 mW; Part 3: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive |
| ECT-RADIO | 12/300220d | ETSI EN 300 220-1 V2.1.1 (2006-04) | Electromagnetic Compatibility Radio Spectrum Matters; Short Range Devices; Radio Equipment to be used in the 25 MHz to 1,000 MHz Frequency Range with Power Levels Ranging up to 500mW; Part 1: Technical Characteristics and Test Methods |
| ECT-RADIO | 12/300220e | ETSI EN 300 220-2 V2.1.1 (2006-04) | ERM; Short Range Devices; Radio Equipment to be used in the 25MHz to 1,000 MHz Frequency Range with Power Levels Ranging up to 550 mW; Part 2: Supplementary Parameters Not Intended for Conformity Purposes |
| ECT-RADIO | 12/300220f | ETSI EN 300 220-2 V2.1.2 (2007-06) | ERM; Short Range Devices; Radio Equipment to be used in the 25MHz to 1,000 MHz Frequency Range with Power Levels Ranging up to 550 mW; Part 2: Supplementary Parameters Not Intended for Conformity Purposes |
| ECT-RADIO | 12/300220g | EN 300 220-3 V2.1.1 (2006-04) | ERM; Short Range Devices; Radio equipment to be used in the 25 MHz to 1,000 MHz frequency range with power levels ranging up to 500 mW; Part 3: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive |
| ECT-RADIO | 12/300224a | EN 300 224-1 V1.3.1 (2001-01) | Electromagnetic compatibility and Radio spectrum Matters (ERM); On-site paging service; Part 1: Technical and functional characteristics, including test methods |
| ECT-RADIO | 12/300224b | ETSI EN 300 224-2 v1.1.1 (2001-01) | Electromagnetic compatibility and Radio spectrum Matters (ERM); On-site paging service; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive |
| ECT-RADIO | 12/300279 | EN 300 279 v1.2.1 (1999-02) | Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for Private land Mobile Radio (PMR) and ancillary equipment (speech and/or non-speech) |
| ECT-RADIO | 12/300296a | ETSI EN 300 296-1 v1.1.1 (2001-03) | Electromagnetic compatibility and Radio spectrum Matters (ERM): Land Mobile Service; Radio equipment using integral antennas intended primarily for analogue speech; Part 1: Technical characteristics and methods of measurement |
| ECT-RADIO | 12/300296b | ETSI EN 300 296-2 v1.1.1 (2001-03) | ERM; Land Mobile Service; Radio equipment using integral antennas intended primarily for analogue speech; Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive |
| ECT-RADIO | 12/300328a | ETSI EN 300 328-1 V1.2.2 (2000-07) | ERM; Wideband Transmission systems; Data transmission equipment operating in the 2.4 GHz ISM band and using spread spectrum modulation techniques; Part 1: Technical characteristics and test conditions |
| ECT-RADIO | 12/300328b | ETSI EN 300 328-2 v1.2.1 (2001-12) | Wideband Transmission systems; Data transmission equipment operating in the 2.4 GHz ISM band and using spread spectrum modulation techniques; Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive |
| ECT-RADIO | 12/300328c | ETSI EN 300 328-2 V1.1.1 (2000-07) | Wideband Transmission systems: Data transmission equipment operating in the 2.4 GHz ISM band and using spread spectrum modulation techniques; Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive |
| ECT-RADIO | 12/300328d | ETS EN 300 328, Second Edition (November 1996) | Radio Equipment and Systems (RES); Wideband transmission systems; Technical characteristics and test conditions for data transmission equipment operating in the 2.4 GHz ISM band and using spread spectrum modulation techniques |
| ECT-RADIO | 12/300328e | ETSI EN 300 328 V1.5.1 (2004-08) | ERM; Wideband Transmission systems; Data transmission equipment operating in the 2.4 GHz ISM band and using wide band modulation techniques; Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive |
| ECT-RADIO | 12/300328f | ETSI EN 300 328 V1.6.1 (2004-07) | ERM; Wideband Transmission systems; Data transmission equipment operating in the 2.4 GHz ISM band and using wide band modulation techniques; Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive |
| ECT-RADIO | 12/300328g | ETSI EN 300 328 V1.7.1 (2006-10) | ERM; Wideband Transmission Systems; Data transport equipment operating in the 2.4 GHz ISM band and using wide band modulation techniques; Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive |
| ECT-RADIO | 12/300329 | ETS 300 329, Second Edition (June 1997) | Radio Equipment and Systems (RES); ElectroMagnetic Compatibility (EMC) for Digital Enhanced Cordless Telecommunications (DECT) equipment |
| ECT-RADIO | 12/300330 | ETSI EN 300 330 v1.2.2 (1999-05) | ERM; Short Range Devices (SRD); Technical characteristics and test methods for radio equipment in the frequency range 9 kHz to 25 MHz and inductive loop systems in the frequency range 9kHz to 30 MHz |
| ECT-RADIO | 12/300330a | ETSI EN 300 330-1 v1.3.2 (2002-12) | ERM; Short Range Devices; Radio equipment in the frequency range 9 kHz to 25 MHz and inductive loop systems in the frequency range 9 kHz to 30 MHz; Part 1: Technical characteristics and test methods |
| ECT-RADIO | 12/300330b | ETSI EN 300 330-2 v1.1.1 (2001-06) | ERM; Short Range Devices (SRD); Radio equipment in the frequency range 9kHz to 25 MHz and inductive loop systems in the frequency range 9 kHz to 30 MHz; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive |
| ECT-RADIO | 12/300330c | ETSI EN 300 330-1 V1.5.1 (2006-04) | ERM; Short Range Devices; Radio Equipment in the Frequency Range 9kHz to 25 MHz and Inductive Loop Systems in the Frequency Range 9kHz to 30 MHz; Part 1: Technical Characteristics and Test Methods |
| ECT-RADIO | 12/300330d | ETSI EN 300 330-2 V1.3.1 (2006-04) | ERM; Short Range Devices (SRD); Radio Equipment in the Frequency Range 9kHz to 30 MHz; Part 2: Harmonized EN Under Article 3.2 of the R&TTE Directive |
| ECT-RADIO | 12/300339 | EN 300 339 v1.1.1 (1998-03) | Electromagnetic compatibility and Radio spectrum Matters (ERM); General ElectroMagnetic Compatibility (EMC) for radio communications equipment |
| ECT-RADIO | 12/300341 | ETSI EN 300 341-2 v1.1.1 (2000-12) | ERM; Land Mobile service (RP 02); Radio equipment using an integral antenna transmitting signals to initiate a specific response in the receiver; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive |
| ECT-RADIO | 12/300373a | ETSI EN 300 373-1, v1.2.1 (2002-10) | ERM; Maritime Mobile transmitters and receivers for use in the MF and HF bands; Part 1: Technical characteristics and methods of measurement |
| ECT-RADIO | 12/300373b | ETSI EN 300 373-2, v1.1.1 (2004-01) | ERM; Maritime Mobile transmitters and receivers for use in the MF and HF bands; Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive |
| ECT-RADIO | 12/300373c | ETSI EN 300 373-3, v1.1.1 (2004-01) | ERM; Maritime Mobile transmitters and receivers for use in the MF and HF bands; Part 3: Harmonized EN covering essential requirements under article 3.3(e) of the R&TTE Directive |
| ECT-RADIO | 12/300385 | EN 300 385 V1.2.1 (1999-10) | Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for fixed radio links and ancillary equipment |
| ECT-RADIO | 12/300390 | ETSI EN 300 390-2 v1.1.1 (2000-09) | ERM; Land Mobile Service; Radio equipment intended for the transmission of data (and speech) and using an integral antenna; Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive |
| ECT-RADIO | 12/300390a | ETSI EN 300 390-1 v1.2.1 (2000-09) | Electromagnetic compatibility and Radio spectrum Matters (ERM); Land Mobile Service; Radio equipment intended for the transmission of data (and speech) and using an integral antenna; Part 1: Technical characteristics and test conditions |
| ECT-RADIO | 12/300422 | ETSI EN 300 422-2 v1.1.1 (2000-08) | Electromagnetic compatibility and Radio spectrum Matters (ERM); Wireless microphones in the 25 MHz to 3 GHz frequency range; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive |
| ECT-RADIO | 12/300422a | ETSI EN 300 422-2 v1.2.2 (2000-08) | Electromagnetic compatibility and Radio spectrum Matters (ERM); Wireless microphones in the 25 MHz to 3 GHz frequency range; Part 1: Technical characteristics and test methods |
| ECT-RADIO | 12/300422c | ETSI EN 300 422-2 v1.2.2 (2008-03) | Electromagnetic compatibility and Radio spectrum Matters (ERM); Wireless microphones in the 25 MHz to 3 GHz frequency range; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive |
| ECT-RADIO | 12/300431 | ETSI EN 300 431 v1.4.1 (2002-07) | Fixed Radio Systems; Point-to-point equipment; Parameters for radio system for the transmission of digital signals operating in the frequency range 24.50 GHz to 29.50 GHz |
| ECT-RADIO | 12/300440a | ETSI EN 300 440-1 v1.3.1 (2001-09) | Electromagnetic compatibility and Radio spectrum Matters (ERM): Short range devices; Radio equipment to be used in the 1 GHz to 40 GHz frequency range; Part 1: Technical characteristics and test methods |
| ECT-RADIO | 12/300440b | ETSI EN 300 440-2 v1.1.1 (2001-09) | Electromagnetic compatibility and Radio spectrum Matters (ERM); Short range devices; Radio equipment to be used in the 1 GHz to 40 GHz frequency range; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive |
| ECT-RADIO | 12/300440c | ETSI EN 300 440-2 v1.1.2 (2004-07) | Electromagnetic compatibility and Radio spectrum Matters (ERM); Short range devices; Radio equipment to be used in the 1 GHz to 40 GHz frequency range; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive |
| ECT-RADIO | 12/300440d | ETSI EN 300 440-2 v1.2.1 (2008-03) | Electromagnetic compatibility and Radio spectrum Matters (ERM); Short range devices; Radio equipment to be used in the 1 GHz to 40 GHz frequency range; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive |
| ECT-RADIO | 12/300440e | ETSI EN 300 440-1 v1.4.1 (2008-05) | Electromagnetic compatibility and Radio spectrum Matters (ERM): Short range devices; Radio equipment to be used in the 1 GHz to 40 GHz frequency range; Part 1: Technical characteristics and test methods |
| ECT-RADIO | 12/300440f | ETSI EN 300 440-1 v1.5.1 (2009-03) | Electromagnetic compatibility and Radio spectrum Matters (ERM): Short range devices; Radio equipment to be used in the 1 GHz to 40 GHz frequency range; Part 1: Technical characteristics and test methods |
| ECT-RADIO | 12/300440g | ETSI EN 300 440-2 v1.2.1 (2009-03) | Electromagnetic compatibility and Radio spectrum Matters (ERM); Short range devices; Radio equipment to be used in the 1 GHz to 40 GHz frequency range; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive |
| ECT-RADIO | 12/300445a | ETS 300 445 A1 Amendment (March 1997) | Radio Equipment and Systems (RES); ElectroMagnetic Compatibility (EMC) standard for wireless microphones and similar Radio Frequency (RF) audio link equipment |
| ECT-RADIO | 12/300446 | ETS 300 446, Second Edition (March 1997) | Radio Equipment and Systems (RES); ElectroMagnetic Compatibility (EMC) standard for second generation Cordless Telephone (CT2) apparatus operating in the frequency band 864.1 MHz to 868.1 MHz, including public access services |
| ECT-RADIO | 12/300454a | ETSI EN 300 454-1 v1.1.2 (2000-08) | Electromagnetic compatibility and Radio spectrum Matters (ERM); Wide band audio links; Part 1: Technical characteristics and test methods |
| ECT-RADIO | 12/300454b | ETSI EN 300 454-2 v1.1.1 (2000-08) | Electromagnetic compatibility and Radio spectrum Matters (ERM); Wide band audio links; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive |
| ECT-RADIO | 12/300471a | ETSI EN 300 471-1, v1.2.1 (2001-05) | ERM; Land Mobile Service; Rules for Access and the Sharing of common used channels by equipment complying with EN300 113; Part 1: Technical characteristics and methods of measurement |
| ECT-RADIO | 12/300471b | ETSI EN 300 471-2, v1.1.1 (2001-05) | ERM; Land Mobile Serivce; Rules for Access and the Sharing of Common Used Channels by Equipment Complying with EN 300 113; Part 2: Harmonized EN Covering Essential Requirements under Article 3.2 of the R&TTE Directive |
| ECT-RADIO | 12/300630 | ETSI EN 300 630 v1.3.1 (2001-02) | Fixed Radio Systems; Point-to-point equipment; Low capacity point-to-point digital radio systems operating in the 1.4 GHz frequency band |
| ECT-RADIO | 12/300633 | ETSI EN 300 633 v1.3.1 (2001-02) | Fixed Radio Systems; Point-to-point equipment; Low and medium capacity point-to-point digital radio systems operating in the frequency range 2.1 GHz to 2.6 GHz |
| ECT-RADIO | 12/300639 | ETSI EN 300 639 v1.3.1 (2001-02) | Fixed Radio Systems; Point-to-point equipment; Sub-STM-1 digital radio systems operating in the 13 GHz, 15 GHz and 18 GHz frequency bands with about 28 MHz co-polar and 14 MHz cross-polar channel spacing |
| ECT-RADIO | 12/300683 | ETS 300 683 (June 1997) | Radio Equipment Systems (RES); ElectroMagnetic Compatibility (EMC) standard for Short Range Devices (SRD) operating on frequencies between 9 kHz and 25 GHz |
| ECT-RADIO | 12/300718b | ETSI EN 300 718-2 v1.1.1 (2001-05) | Electromagnetic compatibility and Radio spectrum Matters (ERM); Avalanche Beacons; Transmitter-receiver systems; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive |
| ECT-RADIO | 12/300761a | ETSI EN 300 761-1 v1.2.1 (2001-06) | ERM; Short Range Devices (SRD); Automatic Vehicle Identification (AVI) for railways operating in the 2.45 GHz frequency range; Part 1: Technical characteristics and methods of measurement |
| ECT-RADIO | 12/300761b | ETSI EN 300 761-2 v1.1.1 (2001-06) | ERM; Short Range Devices (SRD); Automatic Vehicle Identification (AVI) for railways operating in the 2.45 GHz frequency range; Part 2: Harmonized standard covering essential requirements under article 3.2 of the R&TTE Directive |
| ECT-RADIO | 12/300826 | ETS 300 826 (November 1997) | Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for 2.4 GHz wideband transmission systems and HIgh PErformance Radio Local Area Network (HIPERLAN) equipment |
| ECT-RADIO | 12/301021a | ETSI EN 301 021 v1.6.1 (2003--07) | Fixed Radio Systems; Point-to-multipoint equipment; Time Division Multiple Access (TDMA); Point-to-multipoint digital radio systems in frequency bands in the range 3 GHz to 11 GHz |
| ECT-RADIO | 12/301126a | ETSI EN 301 126-1 v1.1.2 (1999-09) | Fixed Radio Systems; Conformance testing; Part 1: Point-to-Point equipment - Definitions, general requirements and test procedures |
| ECT-RADIO | 12/301126b | ETSI EN 301 126-2-1 v1.1.1 (2000-12) | Fixed Radio Systems; Conformance testing; Part 2-1: Point-to-Multipoint equipment; Definitions and general requirements |
| ECT-RADIO | 12/301126c | ETSI EN 301 126-2-2 v1.1.1 (2000-11) | Fixed Radio Systems; Conformance testing; Part 2-2: Point-to-Multipoint equipment; Test procedures for FDMA systems |
| ECT-RADIO | 12/301126d | ETSI EN 301 126-2-3 v1.1.1 (2000-11) | Fixed Radio Systems; Conformance testing; Part 2-3: Point-to-Multipoint equipment; Test procedures for TDMA systems |
| ECT-RADIO | 12/301126e | ETSI EN 301 126-2-4 v1.1.1 (2000-11) | Fixed Radio Systems; Conformance testing; Part 2-4: Point-to-Multipoint equipment; Test procedures for FH-CDMA systems |
| ECT-RADIO | 12/301126f | ETSI EN 301 126-2-5 v1.1.1 (2000-11) | Fixed Radio Systems; Conformance testing; Part 2-5: Point-to-Multipoint equipment; Test procedures for DS CDMA systems |
| ECT-RADIO | 12/301126g | ETSI EN 301 126-2-3 v1.2.1 (2004-11) | Fixed Radio Systems; Conformance testing; Part 2-3: Point-to-Multipoint equipment; Test procedures for TDMA systems |
| ECT-RADIO | 12/301126h | ETSI EN 301 126-3-1 v1.1.2 (2002-12) | Fixed Radio Systems; Conformance testing; Part 3-1: Point-to-Point antennas; Definitions, general requirements and test procedures |
| ECT-RADIO | 12/301126i | ETSI EN 301 126-2-6 V1.1.1 (2002-02) | Fixed Radio Systems; Conformance testing; Part 2-6: Point-to-Multipoint equipment; Test procedures for Multi Carrier Time Division Multiple Access (MC-TDMA) systems |
| ECT-RADIO | 12/301166a | ETSI EN 301 166-2 v1.1.1 (2001-12): ERM; Land Mobile Service | Radio equipment for analogue and/or digital communication and operating on narrow band channels and having an antenna connector; Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive |
| ECT-RADIO | 12/301166b | ETSI EN 301 166-1, v1.1.2 (2001-12) | ERM; Land Mobile Service: Radio equipment for analogue and/or digital communication and operating on narrow band channels and having an antenna connector; Part 1: Technical characteristics and methods of measurement |
| ECT-RADIO | 12/301166c | ETSI EN 301 166-2 v1.2.1 (2007-04) | ERM; Land Mobile Service; Radio equipment for analogue and/or digital communication and operating on narrow band channels and having an antenna connector; Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE. |
| ECT-RADIO | 12/301178 | ETSI EN 301 178-2 v1.1.1 (2000-08) | ERM; Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile service operating in the VHF bands (for non-GMDSS applications only); Part 2: Harmonized EN under article 3.2 of the R&TTE Directive |
| ECT-RADIO | 12/301178a | ETSI EN 301 178-2 v1.2.2 (2007-02) | ERM; Portable Very High Frequency (VHF) radiotelephone equipment for the maritime moble service operating in the VHF bands (for non-GMDDSS applications only); Part 2: Harmonized EN under article 3.2 of the R&TTE Directive |
| ECT-RADIO | 12/301213a | ETSI EN 301 213-1 v1.1.2 (2002-02) | Fixed Radio Systems; Point-to-multipoint equipment; Point-to-multipoint digital radio systems in frequency bands in the range 24.25 GHz to 29.5 GHz using different access methods; Part 1: Basic parameters |
| ECT-RADIO | 12/301213b | ETSI EN 301 213-2 v1.3.1 (2001-06) | Fixed Radio Systems; Point-to-multipoint equipment; Point-to-multipoint digital radio systems in frequency bands in the range 24.25 GHz to 29.5 GHz using different access methods; Part 2: Frequency Division Multiple Access (FDMA) methods |
| ECT-RADIO | 12/301213c | ETSI EN 301 213-3 v1.4.1 (2002-02) | Fixed Radio Systems; Point-to-multipoint equipment; Point-to-multipoint digital radio systems in the frequency bands in the range 24.25 GHz to 29.5 GHz using different access methods; Part 3: Time Division Multiple Access (TDMA) methods |
| ECT-RADIO | 12/301213d | ETSI EN 301 213-4 v1.1.1 (2001-08): Fixed Radio Systems | Point-to-multipoint equipment; Point-to-multipoint digital radio systems in frequency bands in the range 24.25 GHz to 29.5 GHz using different access methods; Part 4: Direct Sequence Code Division Multiple Access (DS-CDMA) methods |
| ECT-RADIO | 12/301213e | ETSI EN 301 213-5 v1.1.1 (2001-10): Fixed Radio Systems | Point-to-multipoint equipment; Point-to-multipoint digital radio systems in frequency bands in the range 24.25 GHz to 29.5 GHz using different access methods; Part 5: Multi-Carrier Time Division Multiple Access (MC-TDMA) methods |
| ECT-RADIO | 12/301357 | ETSI EN 301 357-2 v1.2.1 (2001-06): ERM | Cordless audio devices in the range 25 MHz to 2,000 MHz; Consumer radio microphones and in-ear monitoring systems operating in the CEPT harmonized band 863 MHz to 865 MHz; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive |
| ECT-RADIO | 12/301357a | ETSI EN 301 357-1 v1.2.1 (2001-06) | ERM: Cordless audio devices in the range 25 MHz to 2,000 MHz; Consumer radio microphones and in-ear monitoring systems operating in the CEPT harmonized band 863 MHz to 865 MHz; Part 1: Technical characteristics and test methods |
| ECT-RADIO | 12/301357b | ETSI EN 301 357-2 V1.3.1 (2006-05) | ERM; Cordless Audio Devices in the Range 25 MHz to 2,000 MHz. Part 2: Harmonized EN covering essential requirements of 3.2 of the R&TTE Directive |
| ECT-RADIO | 12/301357c | ETSI EN 301 357-1 V1.3.1 (2006-05) | ERM; Cordless Audio Devices in the Range 25 MHz to 2,000 MHz; Part 1: Technical Characteristics and Test Methods |
| ECT-RADIO | 12/301357d | ETSI EN 301 357-2 v1.4.1 (2007-12) | ERM; Cordless Audio Devices in the Range 25 MHz to 2,000 MHz. Part 2: Harmonized EN covering essential requirements of 3.2 of the R&TTE Directive |
| ECT-RADIO | 12/301357e | ETSI EN 301 357-1 V1.4.1 (2008-11) | ERM; Cordless Audio Devices in the Range 25 MHz to 2,000 MHz; Part 1: Technical Characteristics and Test Methods |
| ECT-RADIO | 12/301390 | ETSI EN 301 390 v1.2.1 (2003-07) | Fixed Radio Systems; Point-to-point and Multipoint Systems; Spurious emissions and receiver immunity limits at equipment/antenna port of Digital Fixed Radio Systems |
| ECT-RADIO | 12/301406 | ETSI EN 301 406 V1.5.1 (2003-07) | Digital Enhanced Cordless Telecommunications (DECT); Harmonized EN for Digital Enhanced Cordless Telecommunications (DECT) covering essential requirements under article 3.2 of the R&TTE Directive; Generic radio |
| ECT-RADIO | 12/301459 | ETSI EN 301 459, v1.2.1 (2000-10) | SES; Harmonized EN for SIT and SUT transmitting towards satellites in geostationary orbit in the 29.5 to 20.0 GHz frequency bands covering essential requirements under article 3.2 of the R&TTE Directive |
| ECT-RADIO | 12/3014899 | ETSI EN 301 489-9 v1.4.1 (2007-11) | ERM; EMC standard for radio equipment and services; Part 9: Specific conditions for wireless microphones, similar Radio Frequency (RF) audio link equipment, cordless audio and in-ear monitoring devices |
| ECT-RADIO | 12/301489a | ETSI EN 301 489-1 v1.5.1 (2004-11) | Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements |
| ECT-RADIO | 12/301489b | ETSI EN 301 489-3 v1.4.1 (2002-08) | Electromagnetic compatibility and Radio spectrum Matters; ElectroMagnetic Compatibility standard for radio equipment and services; Part 3: Specific conditions for Short-Range Devices (SRD) operating on frequencies between 9 kHz and 40 GHz |
| ECT-RADIO | 12/301489c | ETSI EN 301 489-4 v1.3.1 (2002-08) | Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 4: Specific conditions for fixed radio links and ancillary equipment and services |
| ECT-RADIO | 12/301489d | ETSI EN 301 489-5 v1.3.1 (2002-08) | Electromagnetic compatibility & Radio spectrum Matters (ERM); EMC standard for radio equipment and services; Part 5: Specific conditions for Private land Mobile Radio (PMR) and ancillary equipment (speech and non-speech) |
| ECT-RADIO | 12/301489e | ETSI EN 301 489-6 v1.2.1 (2002-08) | Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 6: Specific conditions for Digital Enhanced Cordless Telecommunications (DECT) equipment |
| ECT-RADIO | 12/301489f | ETSI EN 301 489-7 v1.2.1 (2002-08) | ERM; EMC standard for radio equipment and services; Part 7: Specific conditions for mobile and portable radio and ancillary equipment of digital cellular radio telecommunications systems (GSM and DCS) |
| ECT-RADIO | 12/301489g | ETSI EN 301 489-8 v1.2.1 (2002-08) | ElectroMagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 8: Specific conditions for GSM base stations |
| ECT-RADIO | 12/301489h | ETSI EN 301 489-9 v1.3.1 (2002-08) | ERM; EMC standard for radio equipment and services; Part 9: Specific conditions for wireless microphones, similar Radio Frequency (RF) audio link equipment, cordless audio and in-ear monitoring devices |
| ECT-RADIO | 12/301489i | ETSI EN 301 489-10 v1.3.1 (2002-08) | EMR; ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 10: Specific conditions for First (CT1 and CT1+) and Second Generation Cordless Telephone (CT2) equipment |
| ECT-RADIO | 12/301489j | ETSI EN 301 489-16 v1.2.1 (2002-08) | Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility standard for radio equipment and services; Part 16: Specific conditions for analogue cellular radio communications equipment, mobile and portable |
| ECT-RADIO | 12/301489k | ETSI EN 301 489-17 v1.1.1 (2000-09) | Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 17: Specific conditions for Wideband data and HIPERLAN equipment |
| ECT-RADIO | 12/301489m | ETSI EN 301 489-17 v1.2.1 (2002-08) | Electromagnetic compatibility and Radio spectrum Matters (ERM); EMC standard for radio equipment and services; Part 17: Specific conditions for 2.4 GHz wideband transmission systems and 5 GHz high performance RLAN equipment |
| ECT-RADIO | 12/301489n | ETSI EN 301 489-18 v1.3.1 (2002-08) | Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 18: Specific conditions for Terrestrial Trunked Radio (TETRA) equipment |
| ECT-RADIO | 12/301489o | ETSI EN 301 489-19 v1.2.1 (2002-11) | ERM; ElectroMagnetic Compatibility (EMC) standard for radiio equipment and services; Part 19: Specific conditions for Receive Only Mobile Earth Stations (ROMES) operating in the 1.5 GHz band providing data communications |
| ECT-RADIO | 12/301489p | ETSI EN 301 489-20 v1.2.1 (2002-11) | Electromagnetic compatibility and Radio spectrum Matters; ElectroMagnetic Compatibility standard for radio equipment and services; Part 20: Specific conditions for Mobile Earth Stations (MES) used in the Mobile Satellite Services (MSS) |
| ECT-RADIO | 12/301489q | ETSI EN 301 489-23 v1.2.1 (2002-11) | Electromagnetic compatibility and Radio spectrum Matters (ERM); EMC standard for radio equipment and services; Part 23: Specific conditions for IMT-2000 CDMA Direct Spread (Ultra) Base Station (BS) radio, repeater and ancillary equipment |
| ECT-RADIO | 12/301489r | ETSI EN 301 489-24 v1.2.1 (2002-11) | Electromagnetic compatibility and Radio spectrum Matters (ERM); EMC standard for radio equipment and services; Part 24: Specific conditions for IMT-2000 CDMA Direct Spread (UTRA) for Mobile and portable (UE) radio and ancillary equipment |
| ECT-RADIO | 12/301489s | ETSI EN 301 489-25 v2.2.1 (2003-05) | Electromagnetic compatibillity and Radio spectrum Matters (ERM); EMC standard for radio equipment and services; Part 25: Specific conditions for IMT-2000 CDMA Multi-carrier Mobile Stations and ancillary equipment |
| ECT-RADIO | 12/301489t | ETSI EN 301 489-26 v2.2.1 (2003-05) | Electromagnetic compatibility and Radio spectrum Matters (ERM); EMC standard for radio equipment and services; Part 26: Specific conditions for IMT-2000 CDMA Multi-carrier Base Stations and ancillary equipment |
| ECT-RADIO | 12/301489u | ETSI EN 301 489-15 v1.2.1 (2002-08) | Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 15: Specific conditions for commercially available amateur radio equipment |
| ECT-RADIO | 12/301489v | ETSI EN 301 489-22, v1.2.1 (2002-08) | ERM; ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 22: Specific conditions for ground based VHF aeronautical mobile and fixed radio equipment |
| ECT-RADIO | 12/301489w | ETSI EN 301 489-22, v1.3.1 (2003-11) | ERM; ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 22: Specific conditions for ground based VHF aeronautical mobile and fixed radio equipment |
| ECT-RADIO | 12/301489x | ETSI EN 301 489-12 v1.2.1 (2003-05) | ERM; EMC standard for radio equipment and services; Part 12: Specific conditions for Earth Stations operated in the frequency ranges between 4 GHz and 30 GHz in the Fixed Satellite Service (FSS) |
| ECT-RADIO | 12/301489z | ETSI EN 301 489-1 v1.6.1 (2005-09) | ERM; ElectroMagnetic Compatability (EMC) Standard for Radio Equipment and Services; Common Technical Requirements |
| ECT-RADIO | 12/301502 | EN 301 502 V8.1.2 (2001-07) | Harmonized EN for Global System for Mobile communications (GSM); Base Station and Repeater equipment covering essential requirements under article 13.21 of the R&TTE directive (GSM 13.21 version 8.1.2 Release 1999) |
| ECT-RADIO | 12/301511 | EN 301 511 V9.0.2 (2003-03) | Global System for Mobile communications (GSM); Harmonized EN for mobile stations in the GSM 900 and GSM 1,800 bands covering essential requirements under article 3.2 of the R&TTE directive (1999/5/EC) |
| ECT-RADIO | 12/301511a | ETSI EN 301 511 V7.0.1 (2000-12) | Global System for Mobile communications (GSM); Harmonized standard for mobile stations in the GSM 900 and DCS 1800 bands |
| ECT-RADIO | 12/301751 | ETSI EN 301 751 v1.2.1 (2002-11) | Fixed Radio Systems; Point-to-Point equipments and antennas; Generic harmonized standard for Point-to-Point digital fixed radio systems and antennas covering the essential requirements under article 3.2 of the 1999/5/EC Directive |
| ECT-RADIO | 12/301753 | ETSI EN 301 753 v1.2.1 (2003-07) | Fixed Radio Systems; Multipoint equipment and antennas; Generic harmonized standard for multipoint digital fixed radio systems and antennas covering the essential requirements under article 3.2 of the Directive 1999/5/EC |
| ECT-RADIO | 12/301783 | ETSI EN 301 783-2 v1.1.1 (2000-09) | Electromagnetic compatibility and Radio spectrum Matters (ERM); Land Mobile Service; Commercially available amateur radio equipment; Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive |
| ECT-RADIO | 12/3017831 | ETSI EN 301 783-1 V1.1.1 (2000-09) | Electromagnetic compatibility and Radio Spectrum Matters (ERM); Land Mobile Service; Commercially available amateur radio equipment; Part 1: Technical characteristics and methods of measurement |
| ECT-RADIO | 12/301796 | ETSI EN 301 796 v1.1.1 (2000-09) | Electromagnetic compatibility and Radio spectrum Matters (ERM); Harmonized EN for CT1 and CT1+ cordless telephone equipment covering essential requirements under article 3.2 of the R&TTE Directive |
| ECT-RADIO | 12/301797 | ETSI EN 301 797 v1.1.1 (2000-09) | Electromagnetic compatibility and Radio spectrum Matters (ERM); Harmonized EN for CT2 cordless telephone equipment covering essential requirements under article 3.2 of the R&TTE Directive |
| ECT-RADIO | 12/301839a | ETSI EN 301 839-1, v1.1.1 (2002-06) | ERM; Radio equipment in the frequency range 402 MHz to 405 MHz for Ultra Low Power Active Medical Implants and Accessories; Part 1: Technical characteristics, including electromagnetic compatibility requirements, and test methods |
| ECT-RADIO | 12/301839b | ETSI EN 301 839-2, v1.1.1 (2002-06) | ERM; Radio equipment in the frequency range 402 MHz to 405 MHz for Ultra Low Power Active Medical Implants and Accessories; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive |
| ECT-RADIO | 12/301839c | ETSI EN 301 839-1, v1.2.1 (2007-07) | ERM; Radio equipment in the frequency range 402 MHz to 405 MHz for Ultra Low Power Active Medical Implants and Accessories; Part 1: Technical characteristics, including electromagnetic compatibility requirements, and test methods |
| ECT-RADIO | 12/301839d | ETSI EN 301 839-2, v1.2.1 (2007-07) | ERM; Radio equipment in the frequency range 402 MHz to 405 MHz for Ultra Low Power Active Medical Implants and Accessories; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive |
| ECT-RADIO | 12/301840 | ETSI EN 301 840-2 v1.1.1 (2001-06) | Electromagnetic compatibility and Radio spectrum Matters (ERM); Digital radio microphones operating in the CEPT Harmonized band 1,785 MHz to 1,800 MHz; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive |
| ECT-RADIO | 12/301840a | ETSI EN 301 840-1, v1.1.1 (2001-06) | ERM; Digital radio microphones operating in the CEPT Harmonized band 1,785 MHz to 1,800 MHz; Part 1: Technical characteristics and methods of measurement |
| ECT-RADIO | 12/301843a | ETSI EN 301 843-1, v1.1.1 (2001-02) | ERM; ElectroMagnetic Compatibility (EMC) standard for marine radio equipment and services; Part 1: Common technical requirements |
| ECT-RADIO | 12/301843b | ETSI EN 301 843-2, v1.1.1 (2001-02) | ERM; ElectroMagnetic Compatibility (EMC) standard for marine radio equipment and services; Part 2: Specific conditions for radiotelephone transmitters and receivers |
| ECT-RADIO | 12/301843c | ETSI EN 301 843-2, v1.2.1 (2004-06) | ERM; ElectroMagnetic Compatibility (EMC) standard for marine radio equipment and services; Part 2: Specific conditions for VHF radiotelephone transmitters and receivers |
| ECT-RADIO | 12/301843f | ETSI EN 301 843-5, v1.1.1 (2004-06) | ERM; ElectroMagnetic Compatibility (EMC) standard for marine radio equipment and services; Part 5: Specific conditions for MF/HF radiotelephone transmitters and receivers |
| ECT-RADIO | 12/301843g | ETSI EN 301 843-1 V1.2.1 (2004-06) | ERM; ElectroMagnetic Compatability (EMC) Standard for Marine Radio Equipment and Services; Part 1: Common Technical Requirements |
| ECT-RADIO | 12/301893 | ETSI EN 301 893 V1.2.2 (2003-06) | Broadband Radio Access Networks (BRAN); 5 GHz high performance RLAN; Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive |
| ECT-RADIO | 12/301893a | ETSI EN 301 893 V1.2.3 (2003-08) | Broadband Radio Access Networks (BRAN); 5 GHz high performance RLAN; Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive |
| ECT-RADIO | 12/301893b | ETSI EN 301 893 V1.3.1 (2005-08) | Broadband Radio Access Networks (BRAN); 5 GHz high performance RLAN; Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive |
| ECT-RADIO | 12/301893c | ETSI EN 301 893 V1.4.1 (2007-12) | Broadband Radio Access Networks (BRAN); 5 GHz high performance RLAN; Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive |
| ECT-RADIO | 12/301893d | ETSI EN 301 893 V1.5.1:2008 | Broadband Radio Access Networks (BRAN); 5 GHz high performance RLAN; Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive |
| ECT-RADIO | 12/301908a | ETSI EN 301 908-1, v2.2.1 (2003-10) | Base Stations, Repeaters and User Equipment for IMT-2000 Third-Generation cellular networks; Part 1: Harmonized EN for IMT-2000, introduction and common requirements, covering essential requirements of article 3.2 of the R&TTE Directive |
| ECT-RADIO | 12/301908b | ETSI EN 301 908-2, v2.2.1 (2003-10) | Base Stations, Repeaters and User Equipment for IMT-2000 Third-Generation cellular networks; Part 2: Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA FDD) (UE) covering essential requirements of article 3.2 of the R&TTE Directive |
| ECT-RADIO | 12/301908c | ETSI EN 301 908-3, v2.2.1 (2003-10) | Base Stations, Repeaters and User Equipment for IMT-2000 Third-Generation cellular networks; Part 3: Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA FDD) (BS) covering essential requirements of article 3.2 of the R&TTE Directive |
| ECT-RADIO | 12/301908d | ETSI EN 301 908-4, v2.2.1 (2003-10) | Base Stations, Repeaters and User Equipment for IMT-2000 Third-Generation cellular networks; Part 4: Harmonized EN for IMT-2000, CDMA Multi-Carrier (cdma2000) (UE) covering essential requirements of article 3.2 of the R&TTE Directive |
| ECT-RADIO | 12/301908e | ETSI EN 301 908-5, v2.2.1 (2003-10) | BS, Repeaters and User Equipment for IMT-2000 Third-Generation cellular networks; Part 5: Harmonized EN for IMT-2000, CDMA Multi-Carrier (cdma2000) (BS & Repeaters) covering essential requirements of article 3.2 of the R&TTE Directive |
| ECT-RADIO | 12/301908f | ETSI EN 301 908-6, v2.2.1 (2003-10) | Base Stations, Repeaters and User Equipment for IMT-2000 Third-Generation cellular networks; Part 6: Harmonized EN for IMT-2000, CDMA TDD (UTRA TDD) (UE)covering essential requirements of article 3.2 of the R&TTE Directive |
| ECT-RADIO | 12/301908g | ETSI EN 301 908-7, v2.2.1 (2003-10) | Base Stations, Repeaters and User Equipment for IMT-2000 Third-Generation cellular networks; Part 7: Harmonized EN for IMT-2000, CDMA TDD (UTRA TDD) (BS) covering essential requirements of article 3.2 of the R&TTE Directive |
| ECT-RADIO | 12/301908h | ETSI EN 301 908-8, v1.1.1 (2002-01) | Base Stations, Repeaters and User Equipment for IMT-2000 Third-Generation cellular networks; Part 8: Harmonized EN for IMT-2000, TDMA Single-Carrier (UWC 136) (UE) covering essential requirements of article 3.2 of the R&TTE Directive |
| ECT-RADIO | 12/301908i | ETSI EN 301 908-9, v1.1.1 (2002-01) | Base Stations, Repeaters and User Equipment for IMT-2000 Third-Generation cellular networks; Part 9: Harmonized EN for IMT-2000, TDMA Single-Carrier (UWC 136) (BS) covering essential requirements of article 3.2 of the R&TTE Directive |
| ECT-RADIO | 12/301908j | ETSI EN 301 908-10, v2.1.1 (2003-12) | Base Stations, Repeaters and User Equipment for IMT-2000 Third-Generation cellular networks; Part 10: Harmonized EN for IMT-2000, FDMA/TDMA (DECT) covering essential requirements of article 3.2 of the R&TTE Directive |
| ECT-RADIO | 12/301908k | ETSI EN 301 908-11, v2.3.1 (2004-07) | Base Stations, Repeaters and User Equipment for IMT-2000 Third-Generation cellular networks; Part 11: Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA FDD)(Repeaters) covering essential requirements of article 3.2 of the R&TTE Directive |
| ECT-RADIO | 12/301908l | ETSI EN 301 908-7 V2.2.2 (2005-01) | ERM; Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation Cellular Networks; Part 7: Harmonized EN for IMT-2000, CDMA TDD (UTRA TDD) (BS) Covering Essential Requirements of Article 3.2 of the R&TTE Directive |
| ECT-RADIO | 12/301908m | ETSI EN 301 908-7 V3.0.0 (2006-06) | ERM; Base Stations (BS), Repeaters, and User Equipement (UE) for IMT-2000 Third-Generation Cellular Networks: Part 7: Harmonized EN for IMT-2000, CDMA TDD (UTRA TDD) (BS) Covering Essential Requirements of Article 3.2 of the R&TTE Directive |
| ECT-RADIO | 12/301997a | ETSI EN 301 997-1, v1.1.1 (2002-06) | Transmission and Multiplexing (TM); Multipoint equipment; Radio Equipment for use in Multimedia Wireless Systems (MWS) in the frequency band 40.5 GHz to 43.5 GHz; Part 1: General requirements |
| ECT-RADIO | 12/301997b | ETSI EN 301 997-2, v1.1.1 (2003-09) | TM; Multipoint equipment; Radio Equipment for use in Multimedia Wireless Systems in the frequency band 40.5 GHz to 43.5 GHz; Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive |
| ECT-RADIO | 12/302186 | ETSI EN 302 186 v1.1.1 (2003-11) | Satellite Earth Stations and Systems (SES); Harmonized EN for satellite mobile Aircraft Earth Stations (AESs) operating in the 11/12/14 GHz frequency bands covering essential requirements under article 3.2 of the R&TTE directive |
| ECT-RADIO | 12/302195 | ETSI EN 302 195-2 V1.1.1 (2004-03) | (ERM); Radio equipment in the frequency range 9 kHz to 315 kHz for Ultra Low Power Active Medical Implants (ULP-AMI) and accessories; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive |
| ECT-RADIO | 12/302502 | ETSI EN 302 502 V1.2.1 (2008-07) | Broadband Radio Access Networks (BRAN); 5,8 GHz fixed broadband data transmitting systems; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
| ECT-RADIO | 12/302502a | ETSI EN 302 502 v1.1.1 (2006) | Broadband Radio Access Networks (BRAN); 5,8 GHz fixed broadband data transmitting systems; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
| ECT-RADIO | 12/303035a | ETSI EN 303 035-1 v1.2.1 (2001-12) | Terrestrial Trunked Radio (TETRA); Harmonized EN for TETRA equipment covering essential requirements under article 3.2 of the R&TTE Directive; Part 1: Voice plus Data (V+D) |
| ECT-RADIO | 12/303035b | ETSI EN 303 035-2 v1.2.2 (2003-01) | Terrestrial Trunked Radio (TETRA); Harmonized EN for TETRA equipment covering essential requirements under article 3.2 of the R&TTE Directive; Part 2: Direct Mode Operation (DMO) |
| ECT-RADIO | 12/304712 | EN 300 471-1 version 1.1.1 | ERM; Land Mobile Service, Access protocol, occupation rules and corresponding technical characteristics of radio equipment for the transmission of data on shared channels - Part 2: Harmonized EN covering the essential requirements under ... |
| ECT-RADIO | 12/306741 | EN 300 674-1, version 1.2.1 | ERM; RTTT; DSRC transmission equipment (500 kbits/s 250 kbits/s) operating in the 5,8 GHz ISM band; Part 1 General characteristics and test methods for RSU and OBU |
| ECT-RADIO | 12/3067421 | EN 300 674-2-1, version 1.1.1 | ERM; RTTT; DSRC transmission equipment (500 kbits/s 250 kbits/s) operating in the 5,8 GHz ISM band; Part 2 Harmonized EN under Article 2 of R&TTE Directive; Sub - Part 1: Requirements for RSU |
| ECT-RADIO | 12/3067422 | EN 300 674-2-2, version 1.1.1 | ERM; RTTT; DSRC transmission equipment (500 kbits/s 250 kbits/s) operating in the 5,8 GHz ISM band; Part 2 Harmonized EN under Article 2 of R&TTE Directive; Sub - Part 2: Requirements for OBU |
| ECT-RADIO | 12/3121742 | EN 301 217-4-2, v1.1.3 | Fixed Radio Systems; Characteristics and requirements for point-to-point equipment and antennas - Part 4-2: Harmonized EN covering essential requirements of Article 3(2) of R&TTE Directive for antennas |
| ECT-RADIO | 12/31489 | ETSI EN 301 489-1 v1.4.1 (2002-08) | Electromagnetic Compatibility and Radio Spectrum Matter (ERM); Electromagnetic Compatibility (EMC) Standard for Radio Equipment and Services; Part 1: Common Technical Requirements |
| ECT-RADIO | 12/3148928 | EN 301 489-28, version 1.1.1 (2004-07) | ERM; EMC Standard for radio equipment and services - Part 28: Specific conditions for wireless digital video links |
| ECT-RADIO | 12/31489aa | ETSI EN 301 489-1 V1.7.1 (2006-07) | ERM; ElectroMagnetic Compatibilty (EMC); Standard for Radio Equipment and Services; Part 1: Common Technical Requirements |
| ECT-RADIO | 12/31489ab | ETSI EN 301 489-2 V1.3.1 (2002-08) | Electromagnetic compatibility and Radio spectrum Matters (ERM) ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 2: Spesific requirements for radio paging equipment |
| ECT-RADIO | 12/31489ac | ETSI EN 301 489-1 V1.8.1 (2008-04) | ERM; ElectroMagnetic Compatibilty (EMC); Standard for Radio Equipment and Services; Part 1: Common Technical Requirements |
| ECT-RADIO | 12/31489fa | ETSI EN 301 489-7 v1.3.1 (2005-11) | ERM; EMC standard for radio equipment and services; Part 7: Specific conditions for moble and portable radio and ancillary equipment of digital cellular radio telecommunications systems (GSM and DCS) |
| ECT-RADIO | 12/31489m | ETSI EN 301 489-17 v1.3.2 (2008-04) | Electromagnetic compatibility and Radio spectrum Matters (ERM); EMC standard for radio equipment and services; Part 17: Specific conditions for 2.4 GHz wideband transmission systems and 5 GHz high performance RLAN equipment |
| ECT-RADIO | 12/31489n | ETSI EN 301 489-31 V1.1.1 (2005) | Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 31: Specific conditions for equipment in the 9kHz to 315kHz band for Ultra Low Pwer Active |
| ECT-RADIO | 12/31489qa | ETSI EN 301 489-23 v1.3.1 (2006-11) | Electromagnetic compatibility and Radio spectrum Matters (ERM); EMC standard for radio equipment and services; Part 23: Specific conditions for IMT-2000 CDMA Direct Spread (Ultra) Base Station (BS) radio, repeater and ancillary equipment |
| ECT-RADIO | 12/31489r | ETSI EN 301 489-24 v1.3.1 (2005-11) | Electromagnetic compatibility and Radio spectrum Matters (ERM); EMC standard for radio equipment and services; Part 24: Specific Conditions for IMT-2000 CDMA Direct Spread (UTRA) for Mobile and Portable (UE) Radio and Ancillary Equipment |
| ECT-RADIO | 12/31489ra | ETSI EN 301 489-24 v1.4.1 (2006-11) | Electromagnetic compatibility and Radio spectrum Matters (ERM); EMC standard for radio equipment and services; Part 24: Specific Conditions for IMT-2000 CDMA Direct Spread (UTRA) for Mobile and Portable (UE) Radio and Ancillary Equipment |
| ECT-RADIO | 12/31489ss | ETSI EN 301 489-25 V2.3.2 (2005-07) | ERM; ElectroMagnetic Compatibility (EMC); Standard for Radio Equipment and Services; Part 25: Specific Condition for IMT-2000 CDMA Multi-Carrier Moble Stations and Ancillary Equipment |
| ECT-RADIO | 12/31489tt | ETSI EN 301 489-26 V2.3.2 (2005-07) | ERM; ElectroMagnetic Compability (EMC) Standard for Radio Equipment and Services; Part 26: Specific Conditions for CDMA 1x Spread Base Spectrum Stations, Repeaters and Ancillary Equipment |
| ECT-RADIO | 12/31489x | ETSI EN 301 489-12 v2.2.2 (2008-09) | ERM; EMC standard for radio equipment and services; Part 12: Specific conditions for Earth Stations operated in the frequency ranges between 4 GHz and 30 GHz in the Fixed Satellite Service (FSS) |
| ECT-RADIO | 12/321951 | EN 302 195-1 V1.1.1 (2004-03) | ERM; Radio equipment in the frequency range 9kHz to 315kHz for Ultra Low Power Active Medical Implants (ULP-AMI) and accessories; Part 1: Technical characteristics and test methods |
| ECT-RADIO | 12/322081 | EN 302 208-1, v1.1.2 (2006-07) and v1.1.1 (2004-09) | ERM; RF Identification Equipment operating in the band 865 MHz 868 MHz with power levels up to 2 W; Part 1: Technical requirements and methods of measurement |
| ECT-RADIO | 12/322081a | ETSI EN 302 208-1 V1.1.2 (2006-07) | ERM; RF Identification Equipment operating in the band 865 MHz 868 MHz with power levels up to 2 W; Part 1: Technical requirements and methods of measurement |
| ECT-RADIO | 12/322081b | ETSI EN 302 208-1 V1.2.1 (2008-04) | ERM; RF Identification Equipment operating in the band 865 MHz 868 MHz with power levels up to 2 W; Part 1: Technical requirements and methods of measurement |
| ECT-RADIO | 12/322082 | EN 302 208-2 v1.1.1 (2004-09) | ERM; RF Identification Equipment operating in the band 865 MHz 868 MHz with power levels up to 2 W; Part 2: Harmonized EN under Article 3.2 of the R&TTE Directive |
| ECT-RADIO | 12/322082a | EN 302 208-2 v1.2.1 (2008-04) | ERM; RF Identification Equipment operating in the band 865 MHz 868 MHz with power levels up to 2 W; Part 2: Harmonized EN under Article 3.2 of the R&TTE Directive |
| ECT-RADIO | 12/322173 | EN 302 217-3, v1.1.3 | Fixed Radio Systems; Characteristics and requirements for point-to-point equipment and antennas - Part 3: Harmonized EN covering essential requirements of Article 3(2) of R&TTE Directive for equipment operating in frequency bands where no.. |
| ECT-RADIO | 12/322882 | EN 302 288-2, v1.1.1 | ERM; Short Range Devices; RTTT; Short Range Radar equipment operating in the 24 GHz - Part 2: Harmonized EN covering essential requirements of Article 3(2) of the R&TTE Directive |
| ECT-RADIO | 12/322912 | EN 302 291-2, v1.1.1 | ERM; Short Range Devices; Close Range Inductive Data Communication equipment operating at 13,56 MHz - Part 2: Harmonized EN covering essential requirements of Article 3(2) of the R&TTE Directive |
| ECT-RADIO | 12/323262 | EN 302 326-2, v1.1.2 | Fixed Radio Systems; Multi-Point Equipment and Antennas - Part 2: Harmonized EN covering essential requirements of Article 3(2) of the R&TTE Directive for Multipoint Radio Equipment |
| ECT-RADIO | 12/323263 | EN 302 326-3, v1.1.2 | Fixed Radio Systems; Multi-Point Equipment and Antennas - Part 2: Harmonized EN covering essential requirements of Article 3(2) of the R&TTE Directive for Multipoint Radio Antennas |
| ECT-RADIO | 12/399328f | ETSI EN 300 328 V1.6.1 (2004-07) | ERM; Wideband Transmission systems; Data transmission equipment operating in the 2.4 GHz ISM band and using wide band modulation techniques; Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive |
| ECT-RADIO | 12/48927 | ETSI EN 301 489-27 V1.1.1 (2004-06) | ERM; EMC standard for radio equipment and services; Part 27: Specific conditions for Ultra Low Power Active Medical Implants (ULP-AMI) and related peripheal devices (ULP-AMI-P) |
| ECT-RADIO | 12/489e1 | ETSI EN 301 489-6 v1.3.1 (2008-08) | Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 6: Specific conditions for Digital Enhanced Cordless Telecommunications (DECT) equipment |
| ECT-RADIO | 12/50384 | EN 50384 (2002) | Product standard to demonstrate the compliances of radio BS & fixed terminal stations for wireless telecom systems with the basic restrictions or the reference levels related to human exposure to RF EM fields (110 MHz-40GHz) Occupationl |
| ECT-RADIO | 12/50385 | EN 50385 (2002) | Product standard to demonstrate the compliances of radio BS & fixed terminal stations for wireless telecom systems with the basic restrictions or the reference levels related to human exposure to RF EM fields (110 MHz-40GHz) General public |
| ECT-RADIO | 12/908a | ETSI EN 301 908-1 V3.2.1 (2007-05) | Base Stations, Repeaters and User Equipment for IMT-2000 Third-Generation cellular networks; Part 1: Harmonized EN for IMT-2000, introduction and common requirements, covering essential requirements of article 3.2 of the R&TTE Directive |
| ECT-RADIO | 12/ACA03a | ACA Standard 2003, A1 (2006) | Radiocommunications (Electromagnetic Radiation - Human Exposure) Amendment Standard 2006 (No. 1) |
| ECT-RADIO | 12/ACA2003 | ACA Standard 2003 | Radiocommunications (Electromagnetic Radiation - Human Exposure) Standard 2003 |
| ECT-RADIO | 12/ARIBT66 | ARIB Standard STD-T66, version 2.1 (March 26, 2003) | Second Generation Low Power Data Communication System / Wireless LAN System |
| ECT-RADIO | 12/ARIBT67 | ARIB Standard STD-T67, version 1.0 (July 25, 2000) | Telemeter, Telecontrol and Data Transmission Radio Equipment for Specified Low-Power Radio Station |
| ECT-RADIO | 12/ARP3 | Radiation Protection Series No. 3 | Maximum Exposure Levels to Radiofrequency Fields - 3 kHz to 300 GHz |
| ECT-RADIO | 12/AS2772 | AS 2772.2 (1988) | Radiofrequency radiation; Part 2: Principles and methods of measurements - 300 kHz to 100 GHz |
| ECT-RADIO | 12/AS4128 | AS/NZS 4128 (1995) | Cordless Telephones 1.7, Between 30 and 41 MHz |
| ECT-RADIO | 12/AS4268 | AS/NZS 4268 (2003) | Radio equipment and systems - Short range devices - Limits and methods of measurement |
| ECT-RADIO | 12/AS4268a | AS 4268.1 (1996) | Radio equipment and systems- Short range devices; Part 1: Technical characteristics and test methods for radio equipment in the frequency range 9 kHz to 25 MHz and inductive loop systems in the frequency range 9 kHz to 30 MHz |
| ECT-RADIO | 12/AS4268b | AS 4268.2 (1995) | Radio equipment and systems - Short range devices; Part 2: Technical characteristics and test methods for radio equipment to be used in the 25 MHz to 25 GHz frequency range with power levels ranging up to 1 W |
| ECT-RADIO | 12/AS4268c | AS/NZS 4268 (2003) + A1 (2005) | Radio Equipment and Systems - Short Range Devices - Limits and Methods of Measurement |
| ECT-RADIO | 12/AS4268d | AS/NZS 4268 (2003) + A1 (2005) + A2 (2006) | Radio Equipment and Systems - Short Range Devices - Limits and Methods of Measurement |
| ECT-RADIO | 12/AS4268e | AS/NZS 4268 (2008) | Radio equipment and systems - Short range devices - Limits and methods of measurement |
| ECT-RADIO | 12/AS4280a | AS/NZS 4280.1 (2003) | 406 MHz satellite distress beacons - Marine emergency position-indicating radio beacons (EPIRBs) (IEC 61097-2:2002, MOD) |
| ECT-RADIO | 12/AS4280b | AS/NZS 4280.2 (2003) | 406 MHz satellite distress beacons - Personal locator beacons (PLBs) |
| ECT-RADIO | 12/AS4281 | AS/NZS 4281 (1995) | Radiocommunications requirements for cordless telephones operating in the 1.7 MHz and between 30 and 41 MHz frequency bands |
| ECT-RADIO | 12/AS4295 | AS/NZS 4295 (2004) | Analogue speech (angle modulated) equipment operating in land mobile and fixed services bands in the frequency range 29.7 MHz to 1 GHz |
| ECT-RADIO | 12/AS4295a | AS/NZS 4295 (2004) | Analogue speech (angle modulated) equipment operating in land mobile and fixed services bands in the frequency range 29.7 MHz to 1 Ghz |
| ECT-RADIO | 12/AS4330 | AS/NZS 4330 (2000) | Personal EPIRB Equipment, 121.5, 243.0 MHz |
| ECT-RADIO | 12/AS4355 | AS/NZS 4355 (1995) | Radiocommunications equipment used in the handphone and citizen band radio services operating at frequencies not exceeding 30 MHz |
| ECT-RADIO | 12/AS4365 | AS/NZS 4365 (2002) | Radiocommunications equipment used in the UHF citizen band radio service |
| ECT-RADIO | 12/AS4367 | AS 4367 (1996) | AM & SSB 27 MHz Marine Band Equipment |
| ECT-RADIO | 12/AS4415 | AS/NZS 4415 (1996) | Radiotelephone Maritime Mobile VHF IMM |
| ECT-RADIO | 12/AS4415a | AS/NZS 4415.1 (2003) | Radiotelephone transmitters and receivers for the maritime mobile VHF IMM (including DSC) |
| ECT-RADIO | 12/AS4415b | AS/NZS 4415.2 (2003) | Radiotelephone transmitters and receivers for the maritime mobile VHF IMM (non DSC) |
| ECT-RADIO | 12/AS4582 | AS/NZS 4582 (1999) | MF & HF International Maritime Mobile Radiotelephone Service |
| ECT-RADIO | 12/AS4583 | AS/NZS 4583 (1999) | Aeronautical Radio Service in the Frequency Range 118 - 137 MHz |
| ECT-RADIO | 12/AS4769a | AS/NZS 4769.1 (2000) + Amendment 1 | Radiocommunications equipment used in the paging service; Part 1: Angle modulated equipment |
| ECT-RADIO | 12/AS4769b | AS/NZS 4769.2 (2000) | Radiocommunications equipment used in the paging service; Part 2: Amplitude modulated equipment |
| ECT-RADIO | 12/AS4770 | AS/NZS 4770 (2000) | MF & HF land mobile equipment using SSB |
| ECT-RADIO | 12/AS4771 | AS/NZS 4771 (2000) + Amendment No. 1 | Technical characteristics and test conditions for data transmission equipment operating in the 900 MHz, 2.4 GHz and 5.8 GHz bands and using spread spectrum modulation techniques |
| ECT-RADIO | 12/BETS1 | BETS-1, Issue 1 (1996-11) | Technical Standards and Requirements for Low Power Announce Transmitters in the Frequency Bands 525 - 1.705 kHz and 88 - 1.07 MHz |
| ECT-RADIO | 12/BETS4 | BETS-4, Issue 1 (1996-11) | Technical Standards and Requirements for Television Broadcasting Transmitters |
| ECT-RADIO | 12/BETS5 | BETS-5, Issue 1 (1996-11) | Technical Standards and Requirements for AM Broadcasting Transmitters |
| ECT-RADIO | 12/BETS6 | BETS-6, Issue 1 (1996-11) | Technical Standards and Requirements for FM Broadcasting Transmitters |
| ECT-RADIO | 12/BETS6a | BETS-6, Issue 2 (2005-08) | Technical Standards and Requirements for FM Broadcasting Transmitters |
| ECT-RADIO | 12/BETS7 | BETS-7 (1996) | Technical Standards and Requirements for Radio Apparatus Capable for Receiving Television Broadcasting |
| ECT-RADIO | 12/BETS7a | Document AT-34-04-RT | Testing Procedures for Type Approval testing per BETS-7, Issue 1 (November 1, 1996) |
| ECT-RADIO | 12/BETS7b | BETS-7, Issue 2 (2008-06) | Technical Standards and Requirements for Radio Apparatus Capable of Receiving Television Broadcasting |
| ECT-RADIO | 12/BETS8 | BETS-8, Issue 1 (1996-11) | Technical Standards and Requirements for FM Transmitters Operating in Small Remote Communities |
| ECT-RADIO | 12/BETS9 | BETS -9, Issue 1 (1996-11) | Technical Standards and Requirements for Television Transmitters Operating in Small Remote Communities |
| ECT-RADIO | 12/Blue01 | RF, Protocol, and Profile Conformance Test Cases | RF Conformance, Protocol Conformance, and Profile Conformance Test Methods |
| ECT-RADIO | 12/Blue02 | Bluetooth Wireless Technology Test Methods | RF Conformance Testing to Bluetooth System Specifications v1.1 and v1.2 |
| ECT-RADIO | 12/Blue03 | Bluetooth Wireless Technology Test Methods | Protocol and Profile Conformance Tesing to Bluetooth System Specification v1.1 |
| ECT-RADIO | 12/Blue04 | BLUETOOTH Wireless Technology Interoperability Testing | Interoperability Testing (IOT) |
| ECT-RADIO | 12/Blue05 | Bluetooth Wireless Technology Test Method | RF Conformance Testing to Bluetooth System Specification v1.2 |
| ECT-RADIO | 12/Blue06 | Bluetooth Wireless Technology Test Method | RF Conformance Testing to Bluetooth System Specifications v2.0 + EDR |
| ECT-RADIO | 12/Blue07 | Bluetooth Wireless Technology Test Methods | RF Conformance Testing to Bluetooth System Specification v2.1 + EDR |
| ECT-RADIO | 12/C6319 | ANSI C63.19, v3.12 | American National Standard for Methods of Measurement of Compatibility between Wireless Communication Devices and Hearing Aids |
| ECT-RADIO | 12/C6319a | ANSI C63.19 (2001) | American National Standard for Methods of Measurement Compatibility between Wireless Communication Devices and Hearing Aids |
| ECT-RADIO | 12/C6319b | ANSI C63.19 (2007) | American National Standard for Methods of Measurement Compatibility between Wireless Communication Devices and Hearing Aids |
| ECT-RADIO | 12/CAN3C13 | CAN3-C13-M83 (R2003) | Instrument Transformers |
| ECT-RADIO | 12/CAN3C17 | CAN3-C17-M84 (R2004) | Alternating-Current Electricity Metering |
| ECT-RADIO | 12/CTIA | CTIA Test Plan for Mobile Station Over the Air Performance | |
| ECT-RADIO | 12/CTIA2 | CTIA Test Plan for Mobile Station Over the Air Performance as per CTIA Certification Program Management Document, Revision 5.0, (2007-10) | |
| ECT-RADIO | 12/EG07 | IC LMB-EG-07 (2000-02) | Specification for Approval of Types of Electricity Meters, Instrument Transformers and Auxiliary Devices |
| ECT-RADIO | 12/FCC15e2 | Dynamic Frequency Selection (DFS): June 2006 | Memorandum Opinion and Order, Appendix, ET Docket No. 03-122- June 30, 2006 with FCC Method - 47 CFR Part 15, Subpart E: Intentional Radiators. |
| ECT-RADIO | 12/HK2001 | HKTA 2001, Issue 10 (November 2007) | Compliance Test Specification - Safety And Electrical Protection Requirements For Subscriber Telecommunications Equipment |
| ECT-RADIO | 12/HKTA01 | HKTA 1001, Issue 3 (February 2003) | Performance Specification for Single-Sideband Radiotelephone Transmitting and Receiving Equipment Operating in the Frequency Band 1.605 MHz to 27.5 MHz for Voluntary Fitting in Small Craft |
| ECT-RADIO | 12/HKTA011 | HKTA 2011, Issue 4 (August 2003) | Network Connection Specification for Connection of Customer Premises Equipment (CPE) to Direct Exchange Lines (DEL) of the Public Switched Telephone Network (PSTN) in Hong Kong |
| ECT-RADIO | 12/HKTA012 | HKTA 2012, Issue 3 (February 2003) | Network Connection Specification of Calling Number Display Service for Customer Premises Equipment (CPE) to be Connected by Direct Exchange Line (DEL) to the Public Switched Telephone Network (PSTN) in Hong Kong |
| ECT-RADIO | 12/HKTA013 | HKTA 2013, Issue 3 (February 2003) | Network Connection Specification for Connection of Customer Premises Equipment (CPE) to Direct-Dial-In (DDI) Line of the Public Switched Network (PSTN) in Hong Kong |
| ECT-RADIO | 12/HKTA014 | HKTA 2014, Issue 5 (January 2008) | Network Connection Specification for Connection of Customer Premises Equipment (CPE) to the Public Telecommunications Network (PTN) in Hong Kong using ISDN Basic Rate Access (BRA) based on ITU-T Recommendations |
| ECT-RADIO | 12/HKTA015 | HKTA 2015, Issue 5 (January 2008) | Network Connection Specification for Connection of Customer Premises Equipment (CPE) to the Public Telecommunications Network (PTN) in Hong Kong using ISDN Primary Rate Access (PRA) at 1544 kbit/s based on ITU-T Recommendations |
| ECT-RADIO | 12/HKTA017 | HKTA 2017, Issue 3 (February 2003) | Network Connection Specification for Connection of Customer Premises Equipment (CPE) to the Public Telecommunications Network (PTN) in Hong Kong over Digital Trunk at 1544kbit/s Using DTMF Signalling |
| ECT-RADIO | 12/HKTA018 | HKTA 2018, Issue 3 (February 2003) | Network Connection Specification for Connection of Customer Premises Equipment (CPE) to the Public Telecommunications Network (PTN) In Hong Kong Over Digital Trunk at 1544kbit/s using DTMF Signalling with Call Line Indication from the PTN |
| ECT-RADIO | 12/HKTA019 | HKTA 2019, Issue 2 (February 2003) | Network Connection Specification for Connection of Customer Premises Equipment (CPE) to the Public Telecommunications Network (PTN) in Hong Kong by Direct Exchange Line (DEL) with Data Interface to Support Analogue Display Services (ADS) |
| ECT-RADIO | 12/HKTA01a | HKTA 1001, Issue 4 (June 2005) | Performance Specification for Single-Sideband Radiotelephone Transmitting and Receiving Equipment Operating in the Frequency Band 16.05 MHz to 27.5 MHz for Voluntary Fitting in Small Craft |
| ECT-RADIO | 12/HKTA02 | HKTA 1002, Issue 5 (February 2003) | Performance Specification for Angle Modulated Radio Transmitters and Receivers for Use as Base, Mobile and Portable Equipment in the Land Mobile Radio Service |
| ECT-RADIO | 12/HKTA020 | HKTA 2020, Issue 3 (February 2003) | Performance Specification for Private Payphone Equipment (To Comply with Interim Payphone Common Access (SPCA) Requirements) Using Access Line to be Connected to the Public Fixed Telecommunications Network in Hong Kong |
| ECT-RADIO | 12/HKTA021 | HKTA 2021, Issue 2 (February 2003) | Network Connection Specification for Connection of Customer Premises Equipment (CPE) the Public Telecommunication Network (PTN) in Hong Kong by ISDN Basic Rate Access (BRA) Interface Using Metallic Loops on the Network Side of the Network |
| ECT-RADIO | 12/HKTA022 | HKTA 2022, Issue 2 (February 2003) | Network Connection Specification of Calling Name Display (CNAM) Service for Customer Premises Equipment (CPE) to be Connected by Direct Exchange Line (DEL) to the Public Switched Telephone Network (PSTN) in Hong Kong |
| ECT-RADIO | 12/HKTA024 | HKTA 2024, Issue 3 (February 2003) | Performance Specification for Private Payphone Equipment (Not Required to Comply with Interim Single Payphone Common Access (SPCA) Requirements) Using Access Line to be Connected to the Public Fixed Telecommunications Network in Hong Kong |
| ECT-RADIO | 12/HKTA026 | HKTA 2026, Issue 3 (February 2003) | Network Connection Specification for Connection of Customer Premises Equipment (CPE) to the Public Telecommunications Network (PTN) in Hong Kong Using ISDN Basic Rate Access (BRA) Based on ANSI Standards |
| ECT-RADIO | 12/HKTA027 | HKTA 2027, Issue 3 (February 2003) | Network Connection Specification for Connection of Customer Premises Equipment (CPE) to the Public Telecommunications Network (PTN) in Hong Kong Using ISDN Primary Rate Access (PRA) at 1544bit/s Based on ANSI Standards |
| ECT-RADIO | 12/HKTA028 | HKTA 2028, Issue 2 (February 2003) | Network Connection Specification for Connection of Customer Premises Equipment (CPE) to the Public Telecommunications Network (PTN) in Hong Kong using Digital Leased Circuits at 1544 kbit/s |
| ECT-RADIO | 12/HKTA03 | HKTA 1003, Issue 4 (February 2003) | Performance Specification for Private Fixed Link Equipment with a Capacity of 12 or 24 FDM-FM Channels in the Frequency Band 1429 - 1530 MHz |
| ECT-RADIO | 12/HKTA032 | HKTA 2032, Issue 1 (July 2000) | Network Connection Specification for Connection of Customer Premises Equipment (CPE) to the Public Telecommunications Networks in Hong Kong using Asymmetric Digital Subscriber Lines (ADSL) based on ITU-T Recommendation G.992.1 |
| ECT-RADIO | 12/HKTA033 | HKTA 2033, Issue 1 (July 2000) | Network Connection Specification for Connection of Customer Premises Equipment (CPE) to Fixed Telecommunications Networks in Hong Kong using Splitterless Asymmetric Digital Subscriber Lines (ADSL) based on ITU-T Recommendation G.992.2 |
| ECT-RADIO | 12/HKTA036 | HKTA 2036, Issue 4 (September 2008) | Network Connection Specification for Access of Cable Modem based on ITU-T Recommendations or DOCSIS Standards to Public Telecommunications Services via In-Building Coaxial Cable Distribution System (IBCCDS) |
| ECT-RADIO | 12/HKTA04 | HKTA 1004, Issue 4 (February 2003) | Performance Specification for VHF Transmitters and Receivers for Use in the Public Paging Service |
| ECT-RADIO | 12/HKTA05 | HKTA 1005, Issue 4 (February 2003) | Performance Specification for Angle Modulated VHF Maritime Band Radio Equipment for Voluntary Fitting in Small Craft |
| ECT-RADIO | 12/HKTA06 | HKTA 1006, Issue 3 (February 2003) | Performance Specification for Cordless Telephone Operating in the 1.7 MHz and 47 MHz Bands |
| ECT-RADIO | 12/HKTA07 | HKTA 1007, Issue 4 (February 2003) | Performance Specification for Radio Interference Limits and Methods of Measurements for Industrial, Scientific and Medical (ISM) Radio-Frequency Equipment (Excluding Surgical Diathermy Apparatus and RFExciting Arc-Welding Machines) |
| ECT-RADIO | 12/HKTA08 | HKTA 1008, Issue 3 (February 2003) | Performance Specification for Low-Power Radio Microphones, Including Associated Receiving Equipment |
| ECT-RADIO | 12/HKTA10 | HKTA 1010, Issue 1 (June 2003) | Performance Specification for Angle Modulated Radio Transmitters and Receivers for use as Base, Mobile and Portable Equipment in the Land Mobile Radio Service and intended primarily for data applications |
| ECT-RADIO | 12/HKTA15 | HKTA 1015, Issue 4 (February 2003) | Performance Specification for Cordless Telephone Operating in the 864.1 - 868.1 MHz Band |
| ECT-RADIO | 12/HKTA16 | HKTA 1016, Issue 3 (February 2003) | Performance Specification for Cordless Telephone Operating in the 864.1 - 868.1 MHz Band |
| ECT-RADIO | 12/HKTA19 | HKTA 1019, Issue 2 (January 1996) | Performance Specification for TV Antenna Amplifiers |
| ECT-RADIO | 12/HKTA20 | HKTA 1020, Issue 4 (February 2003) | Performance Specification of the Base Station System (BSS) Equipment for use in the Public Mobile Radiotelephone Service (PMRS) Employing Global System for Mobile Communications (GSM) or in the Personal Communications Service (PCS) |
| ECT-RADIO | 12/HKTA20a | HKTA 1020, Issue 5 (January 2005) | Performance Specification of the Base Station System (BSS) and Repeater Equipment for use In the Public Radiotelephone Service (PMRS) Employing Global System for Mobile Communication (GSM) or in the Personal Communication Service (PCS) |
| ECT-RADIO | 12/HKTA20b | HKTA 1020, Issue 6 (April 2007) | Performance Specification of the Base Station System (BSS) and Repeater Equipment for use In the Public Radiotelephone Service (PMRS) Employing Global System for Mobile Communication (GSM) or in the Personal Communication Service (PCS) |
| ECT-RADIO | 12/HKTA218 | HKTA 1218, Issue 1 (March 1999) | Performance Specifications for Radiotelephone Equipment Operating on the Frequency 2182 kHz |
| ECT-RADIO | 12/HKTA22 | HKTA 1022, Issue 3 (February 2003) | Performance Specification for Citizen Band (CB) Radio Transceivers for Use On-Board Fishing Vessels |
| ECT-RADIO | 12/HKTA223 | HKTA 1223, Issue 1 (December 1997) | Performance Specification for Radiotelephone Equipment Distress Frequency Watch Receiver |
| ECT-RADIO | 12/HKTA224 | HKTA 1224, Issue 1 (December 1997) | Performance Specification for Maritime Mobile Single Sideband Radiotelephone Transmitters and Receivers for the MF and HF Bands |
| ECT-RADIO | 12/HKTA225 | HKTA 1225, Issue 1 (December 1997) | Performance Specification for Radiotelephone Alarm Signal Generating Devices for use in Merchant Ships |
| ECT-RADIO | 12/HKTA257 | HTKA 1257, Issue 1 (July 1997) | Performance Specification for Narrowband Direct-Printing Telelgraph Equipment for the Reception of Navigational Meteorological Warning and Urgent Information to Ships (NAVTEX) |
| ECT-RADIO | 12/HKTA258 | HKTA 1258, Issue 1 (March 1999) | Performance Specification for Narrowband Direct-Printing Telegraph Equipment for the Reception of Navigational and Meteorological Warnings and Urgent Information to Ships by HF |
| ECT-RADIO | 12/HKTA259 | HKTA 1259, Issue 1 (July 1997) | Performance Specification for Float-Free Satellite Emergency Position-Indicating Radio Beacon (ECPIRB) Operating on 406 MHz |
| ECT-RADIO | 12/HKTA26 | HKTA 1026, Issue 2 (February 2003) | Performance Specification for cordless Telephone Operating in the 46 MHz and 49 MHz Bands |
| ECT-RADIO | 12/HKTA260 | HKTA 1260, Issue 1 (September 1999) | Performance Specification for Ship Earth Stations Capable of Two-Way Communications |
| ECT-RADIO | 12/HKTA261 | HKTA 1261, Issue 1 (August 1998) | Performance Specification for Float Free Satellite Emergency Position-Indicating Radio Beacon's (EPIRBs) Operating Through the Geostationary Inmarsat Satellite System on 1.6 GHz |
| ECT-RADIO | 12/HKTA262 | HKTA 1262, Issue 1 (August 1998) | Performance Specification for Float-Free Satellite VHF Emergency Response-Indicating Radio Beacons (EPIRBs) |
| ECT-RADIO | 12/HKTA263 | HKTA 1263, Issue 1 (January 1999) | Performance Specification for VHF Radio Installations Capable of Voice Communications and Digital Selective Calling |
| ECT-RADIO | 12/HKTA264 | HKTA 1264, Issue 1 (January 1999) | Performance Specification for Shipborne MF Radio Instillations Capable of Voice Communications and Digital Selective Calling |
| ECT-RADIO | 12/HKTA265 | HKTA 1265, Issue 1 (January 1999) | Performance Specification for Shipborne MF/HF Radio Installations Capable of Voice Communications, Narrow-Band Direct-Printing and Digital Selective Calling |
| ECT-RADIO | 12/HKTA266 | HKTA 1266, Issue 1 (September 1999) | Performance Specification for Shipborne Integrated Radiocommunications Systems (IRCS) When Used in the GMDSS |
| ECT-RADIO | 12/HKTA27 | HKTA 1027, Issue 2 (February 2003) | Performance Specification for Personal Handy Phone System (PHS) Equipment for Private Use |
| ECT-RADIO | 12/HKTA277 | HKTA 1277, Issue 1 (March 1999) | Performance Specification for Survival Craft Two-Way VHF Radiotelephone Apparatus |
| ECT-RADIO | 12/HKTA281 | HKTA 1281, Issue 1 (June 1997) | Performance Specification for Marine Radar Transponder for use in Search and Rescue Operations at Sea (SART) |
| ECT-RADIO | 12/HKTA282 | HKTA 1282, Issue 1 (July 1997) | Performance Specification for Inmarsat Enhanced Group Call (EGC) Equipment and Inmarsat Standard-Ship Earth Station Capable of Transmitting and Receiving Direct-Printing Communications |
| ECT-RADIO | 12/HKTA29 | HKTA 1029, Issue 3 (April 2004) | Performance Specification for 800 MHz TDMA Dual-Mode Mobile Station for use in the Public Mobile Radiotelephone Service |
| ECT-RADIO | 12/HKTA30 | HKTA 1030, Issue 4 (April 2004) | Performance Specification for 800 MHz Base Station Supporting TDMA Dual-Mode Mobile Station for use in the Public Mobile Radiotelephone service |
| ECT-RADIO | 12/HKTA31 | HKTA 1031, Issue 3 (April 2004) | Performance Specification for 800 MHz CDMA Dual-Mode Mobile Station for use in the Public Mobile Radiotelephone Service |
| ECT-RADIO | 12/HKTA32 | HKTA 1032, Issue 4 (April 2004) | Performance Specification for 800 MHz Base Station Supporting CDMA Dual-Mode Mobile Station for use in the Public Mobile Radiotelephone Service |
| ECT-RADIO | 12/HKTA33 | HKTA 1033, Issue 4 (February 2003) | Performance Specification of the Mobile Stations and Portable Equipment for use in the Public Mobile Radiotelephone Service (PMRS) Employing Global System for Mobile Communications (GSM) and/or in the Personal Communications Service (PCS) |
| ECT-RADIO | 12/HKTA33a | HKTA 1033, Issue 5 (January 2006) | Performance Specification of the Mobile Station and Portable Equipment for use in the Public Mobile Radiotelephone Service (PMRS) Employing Global System for Mobile Communication (GSM) and/or in the Personal Communication Service (PCS) |
| ECT-RADIO | 12/HKTA34 | HKTA 1034, Issue 2 (February 2003) | Performance Specification for Digital Enhanced Cordless Telecommunications (DECT) Equipment for Private Use |
| ECT-RADIO | 12/HKTA35 | HKTA 1035, Issue 3 (April 2005) | Performance Specification for Low Power Device |
| ECT-RADIO | 12/HKTA36 | HKTA 1036, Issue 2 (February 2003) | Performance Specification for Digital Fixed Link Equipment Operating in the 38 Ghz Frequency Band |
| ECT-RADIO | 12/HKTA37 | HKTA 1037, Issue 2 (February 2003) | Performance Specification for Digital Fixed Link Equipment Operating in the 23 GHz Frequency Band |
| ECT-RADIO | 12/HKTA39 | HKTA 1039, Issue 2 (April 2005) | Performance Specification for Radiocommunications Apparatus Operating in the 2.4 Ghz or 5 Ghz Band and Employing Frequency Hopping or digital Modulation |
| ECT-RADIO | 12/HKTA39a | HKTA 1039, Issue 3 (January 2008) | Performance Specification for Radiocommunications Apparatus Operating in the 2.4 Ghz or 5 Ghz Band and Employing Frequency Hopping or digital Modulation |
| ECT-RADIO | 12/HKTA41 | HKTA 1041, Issue 1 (February 2003) | Performance Specification for Radiocommunications Apparatus Operating in the 27 MHz Band for Private Use |
| ECT-RADIO | 12/HKTA42 | HKTA 1042, Issue 2 (February 2003) | Performance Specification for Radio Equipment Operating in the 5 GHz Band for Wireless Access |
| ECT-RADIO | 12/HKTA43 | HKTA 1043, Issue 2 (February 2003) | Performance Specification for Base Station Equipment for Use in the Third Generation (3G) Mobile Communications Services Employing CDMA Direct Spread (UTRA FDD) |
| ECT-RADIO | 12/HKTA44 | HKTA 1044, Issue 1 (February 2003) | Performance Specification for Short-Range Portable Radio Operating in the 409 MHz Band |
| ECT-RADIO | 12/HKTA45 | HKTA 1045, Issue 1 (February 2003) | Performance Specification for Cordless Telephone Operating in the 254 MHz and 380 MHz Bands |
| ECT-RADIO | 12/HKTA46 | HKTA 1046, Issue 2 (February 2003) | Method of Measurement for Radio Transmitter for Use in the Land Mobile Service |
| ECT-RADIO | 12/HKTA46a | HKTA 1046, Issue 3 (September 2008) | Method of Measurement for Radio Transmitter for Use in the Land Mobile Service |
| ECT-RADIO | 12/HKTA47 | HKTA 1047, Issue 1 (February 2003) | Performance Specification for Radio Equipment used in Trunked Mobile Radio System employing Terrestrial Trunked Radio (TETRA) technology |
| ECT-RADIO | 12/HKTA48 | HKTA 1048, Issue 1 (June 2003) | Performance Specification for User Equipment for use in the 3G Mobile Communications Services employing CDMA Direct Spread (UTRA FDD) |
| ECT-RADIO | 12/HKTA49 | HKTA 1049, Issue 1 (April 2005) | Performance Specification for Radio Frequency Identification (RFID) Equipment Operating in the 865 - 868 MHz and/or 920 - 925 MHz Bands |
| ECT-RADIO | 12/IDA01 | IDA TS AR, Issue 1 (July 21, 2005) | Technical Specification for Amateur Radio Equipment |
| ECT-RADIO | 12/IDA02 | IDA TS LMR, Issue 1, (July 21, 2005) | Technical Specification for Land Mobile Radio Equipment |
| ECT-RADIO | 12/IDA02a | IDA TS LMR, Issue 1, Rev 1 (August 2006) | Technical Specification for Land Mobile Radio Equipment |
| ECT-RADIO | 12/IDA03 | IDA TS RPG, Issue 1 (July 21, 2005) | Technical Specification for Radio Pagers (for Public Paging Service) |
| ECT-RADIO | 12/IDA04 | IDA TS GSM-BS, Issue 1 (July 21, 2005) | Technical Specification for GSM Base Station and Repeater Equipment |
| ECT-RADIO | 12/IDA05 | IDA TS WBA, Issue 1 (June 2005) | Technical Specification for Wireless Broadband Access (WBA) Equipment |
| ECT-RADIO | 12/IDA06 | IDA TS 106 (Dec. 1999) | Type Approval Specification for Cordless Telephone (CT-2) |
| ECT-RADIO | 12/IDA09 | IDA TS 110 (Dec. 1999) | Type Approval Specification for Cordless Telephone (CT-3) within the confined area of a building |
| ECT-RADIO | 12/IDA13 | IDA TS CDMA 1900 (Dec. 1999) | Type Approval Specification for CDMA 1900 Mobile Equipment |
| ECT-RADIO | 12/IDA14 | IDA TS DECT (Dec. 1999) | Type Approval Specification for DECT equipment for use within the confined area of a building |
| ECT-RADIO | 12/IDA15 | IDA TS GMPCS, Issue 1, Rev 2 (July 21, 2005) | Technical Specification for Global Mobile Personal Communication Satellite (GMPCS) Terminal Equipment |
| ECT-RADIO | 12/IDA16 | IDA TS GSM-MT, Issue 1 (July 21, 2005) | Technical Specification for GSM Mobile Terminals |
| ECT-RADIO | 12/IDA17 | IDA TS 3G BS, Issue 1 (June 2005) | Technical Specification for IMT-2000 Third Generation (3G) Cellular Based Station and Repeater Station |
| ECT-RADIO | 12/IDA18 | IDA TS 3G-MT, Issue 1 (July 21, 2005) | Technical Specification for IMT-2000 Third Generation (3G) Cellular Mobile Terminal |
| ECT-RADIO | 12/IDA19 | IDA TS PHS V1 (Jun. 2001) | Type Approval Specification for PHS Equipment (Version 1) for use within the confined area of a building |
| ECT-RADIO | 12/IDA20 | IDA TS PHS V2 (Jun. 2001) | Type Approval Specification for PHS Equipment (Version 2) for use within the confined area of a building |
| ECT-RADIO | 12/IDA22 | IDA TS 1 Analogue Cordless Telephone (CT-0) (Mar. 2000) | Type Approval Specification for Cordless Telephone Systems (CT0) |
| ECT-RADIO | 12/IDA23 | IDA TS 3 Wireless LAN (Data Comm. System) (Dec. 1999) | Type Approval Specification for Wireless Data Communication Systems for use within the confined area of a building in Frequency range 18.82 - 18.87 GHz and 19.16 - 19.21 GHz |
| ECT-RADIO | 12/IDA24 | IDA TS 4 CB Walkie Talkie (Dec. 1999) | Type Approval Specification for Handheld Portable Radio Transceivers operating in the Citizen Band of 27.12 MHz |
| ECT-RADIO | 12/IDA25 | IDA TS 5 Wireless Microphone (Jun. 2001) | Type Approval Specification for Radio Microphone Equipment |
| ECT-RADIO | 12/IDA25A | IDA TS CT-CTS, Issue 1 (Dec. 2004) | Technical Specification for Cordless Telephones and Cordless Telecommunications Systems |
| ECT-RADIO | 12/IDA25b | IDA TS CT- CTS Issue 1, Rev 1 (April 2006) | Technical Specification for Cordless Telephones and Cordless Telecommunications Systems |
| ECT-RADIO | 12/IDA26 | IDA TS 6 Radio Paging Transmitter (In-house) (Dec. 1999) | Type Approval Specification for On-Site Paging Service in the Frequency Bands of 27.12 MHz and 40.68 MHz |
| ECT-RADIO | 12/IDA27 | IDA TS 7 Induction Loop Communication System (Dec. 1999) | Type Approval Specification for Induction Loop Communication Systems |
| ECT-RADIO | 12/IDA28 | IDA TS 8 VHF On-Site Radio Paging System (Dec. 1999) | Type Approval Specification for VHF On-Site Paging Systems operating in the frequency bands of 151.125 MHz and 151.150 MHz |
| ECT-RADIO | 12/IDA29 | IDA TS 9 Radio Telemetry Transmitter (Dec. 1999) | Type Approval Specification for Radio Telemetry and Telecommand Equipment operating in the frequency bands of 26.965 - 27.275 MHz and 29.725 - 30 MHz |
| ECT-RADIO | 12/IDA30 | IDA TS 10 Radio Detection and Alarm System (Aug. 2001) | Type Approval Specification for Radio Detection and Alarm Systems |
| ECT-RADIO | 12/IDA31 | IDA TS 11 Medical & Biological Telemetry Transm. (Dec. 199 | Type Approval Specification for Medical and Biological Telemetry Devices |
| ECT-RADIO | 12/IDA32 | IDA TS 12 Wireless Modem (Dec. 1999) | Type Approval Specification for Wireless Data Communication Systems for use within the confined area of a building |
| ECT-RADIO | 12/IDA33 | IDA TS 13 Wireless Video Transmitter (Jan. 2002) | Type Approval Specification for Wireless Video Transmitter |
| ECT-RADIO | 12/IDA34 | IDA TS 14 Radio Equipment and Devices | Type Approval Specification for Radio Equipment and Devices in the frequency band of 433.79 - 434.79 MHz, 866.10 - 869.00 MHz, 924.00 - 925.00 MHz and 2,400.00 - 2,483.50 MHz |
| ECT-RADIO | 12/IDA35 | IDA TS SRRS Short Range Radar System (May 2001) | Type Approval Specification for Short Range Radar System in 76 GHz - 77 GHz for use in Road Transport and Traffic Telematics Applications |
| ECT-RADIO | 12/IDA36 | IDA TS SSS Wireless LAN & Bluetooth Devices (April 2002) | Type Approval Specification for Spread Spectrum Systems (Wireless LAN and Bluetooth Devices) & (May 2001): Guidance Notes on Blue tooth Type Approval Framework |
| ECT-RADIO | 12/IDA48 | IDA TS SRD, Issue 1, Rev. 1 (July 21, 2005) | Technical Specification for Short Range Devices |
| ECT-RADIO | 12/IDA48a | IDA TS SRD Issue 1, Revision 2 (August 2006) | Technical Specification for Short Range Devices |
| ECT-RADIO | 12/IDA48b | IDA TS SRD Issue 1, Revision 3 (January 2008) | Technical Specification for Short Range Devices |
| ECT-RADIO | 12/IDAUWB | IDA TS UWB, Issue 1 (December 2007) | Technical Specification for Ultra Wideband (UWB) Devices) |
| ECT-RADIO | 12/IS2014a | IS 2014-4 (May 19, 1997) | GSM Mobile Station, Type Approval Guidelines |
| ECT-RADIO | 12/IS2015a | IS 2015-0 (May 19, 1997) | Trunked Radio Mobile Station, Type Approval Guidelines |
| ECT-RADIO | 12/IS2016a | IS 2016-0 (May 19, 1997) | Mobile Data Terminal Equipment, Type Approval Guidelines |
| ECT-RADIO | 12/IS2017a | IS 2017-0 (May 19, 1997) | DCS-1800 Mobile Station, Type Approval Guidelines |
| ECT-RADIO | 12/IS2018a | IS 2018-1 (Nov. 23, 1998) | 284.5 MHz - 285.5 MHz Radio Paging Receiver, Type Approval Guidelines |
| ECT-RADIO | 12/IS2019a | IS 2019-0 (September 9, 1998) | 1.6/2.4 GHz Satellite Personal Communications Networks (S-PCN) Mobile Earth Stations (MESs) Technical Requirements and Type Approval Guidelines |
| ECT-RADIO | 12/IS2020a | IS 2020-4 (May 27, 1997) | AMPS Mobile Station, Type Approval Guidelines |
| ECT-RADIO | 12/KCC0837 | KCC Notice 2008-37, K only (May 19, 2008) | Technical Requirements for the Human Protection against Electromagnetic Waves |
| ECT-RADIO | 12/KCC13 | KCC Public Notification 2009-13, K only (April 1, 2009) | Rules on Radio Equipment including other Technical Requirements |
| ECT-RADIO | 12/KCC137 | KCC Notice 2008-137, K only (Dec. 31, 2008) | Rules on Radio Equipment including other Technical Requirements |
| ECT-RADIO | 12/KCC138 | KCC Notice 2008-138, K only (Dec. 31, 2008) | Technical Requirements for unlicensed radio equipment |
| ECT-RADIO | 12/KN48924 | KN 301 489-24 (2008-5) | Electromagnetic compatibility and Radio spectrum Matters (ERM); EMC standard for radio equipment and services; Part 24: Specific Conditions for IMT-2000 CDMA Direct Spread (UTRA) for Mobile and Portable (UE) Radio and Ancillary Equipment |
| ECT-RADIO | 12/KN4897 | KN 301 489-7 (2008-5) | ERM; EMC standard for radio equipment and services; Part 7: Specific conditions for moble and portable radio and ancillary equipment of digital cellular radio telecommunications systems (GSM and DCS) |
| ECT-RADIO | 12/KN489a | KN 301 489-1 (2008-5); RRL Notice No. 2008-4 (May 20, 2008) | (ERM); (EMC) standard for radio equipment and services; Part 1 |
| ECT-RADIO | 12/KN489q | KN 301 489-17 (2008-5); RRL Notice No. 2008-5 (May 20, 2008) | ERM); EMC standard for radio equipment and services; Part 17: Specific conditions for 2.4 GHz wideband transmission systems and 5 GHz high performance RLAN equipment |
| ECT-RADIO | 12/KN90 | Korea RRL Notice No. 90 (2004) | Conformity Assessment Method for Type Approval and Registration (Radio Equipment) |
| ECT-RADIO | 12/KNM179 | Korea MIC Rule No. 179 | Rules on Radio Equipment using MIC Rule No. 622, 686, 716, 761, 771, 801, 824, 838, 842, 845, 871, 22, 45, 108, 135, 161, 163, 168, and 179 |
| ECT-RADIO | 12/KR105 | Korea RRL Notification No. 2005-105 (Nov 4, 2005) | Radio Research Laboratory No. 2005-105: Technical Requirements for the Radio Equipment of Telecommunication Service |
| ECT-RADIO | 12/KR127 | RRL Notice No. 2005-127 (Dec 2005) | Technical Requirement for the Radio Equipment for Other Services than Broadcasting, Maritime, Aeronautical and Telecommunications Service |
| ECT-RADIO | 12/KR22 | RRL Notice No. 2005-22 (March 18, 2005) | Technical Requirements for the Radio Equipment for Maritime Mobile Service & Maritime Radio Navigation Service |
| ECT-RADIO | 12/KR23 | RRL Notice No. 2005-23 (March 18, 2005) | Technical Requirements for the Radio Equipment for Aeronautical Mobile Service & Aeronautical Radio Navigation Service |
| ECT-RADIO | 12/KR24 | RRL Notice No. 2005-24 (March 18, 2005) | Technical Requirements for the Radio Equipment for Telecommunications Service |
| ECT-RADIO | 12/KR25 | RRL Notice No. 2005-25 (March 18, 2005) | Technical Requirements for the Radio Equipment for Other Services than Broadcasting, Maritime, Aeronautical and Telecommunications Service |
| ECT-RADIO | 12/KR84 | RRL Notice No. 2006-84 (November 4, 2005) | Technical Requirements for the Radio Equipment for Other Services than Broadcasting, Maritime, Aeronautical and Telecommunications Service |
| ECT-RADIO | 12/KR88 | MIC Notice No. 2001-88 (October 10, 2001) | Technical Requirements for the Human Protection against Electromagnetic Waves |
| ECT-RADIO | 12/LP0002 | LP0002 (January 2002) | Low-Power Radio-frequency Devices Technical Specifications |
| ECT-RADIO | 12/LP0002a | LP0002 (January 2002) | Low-power Radio-frequency Devices, Technical Specifications - Sections: 3, 4.3, 4.4, 4.5, 4.6, and 4.7 |
| ECT-RADIO | 12/LP0002b | LP0002 (2003) | Low-power Radio-frequency Devices - Technical Regulations |
| ECT-RADIO | 12/LP0002c | DGT LP0002 (revised 24 March 2005) | DGT Low-power Radio-Frequency Devices Technical Regulations, LP0002 (revised 24 March 2005) |
| ECT-RADIO | 12/RPS3 | Radio Protection Series No. 3 | Maximum Exposure Level to RadioFrequency Fields - 3 kHz to 300 GHz/Australian Standards |
| ECT-RADIO | 12/RRA0816 | RRA Notice 2008-16, K only (Jun. 2, 2008) | Technical Requirements for Measurement of Specific Absorption Rate (SAR) |
| ECT-RADIO | 12/RRA0817 | RRA Notice 2008-17, K only (Jun. 2, 2008) | Technical Requirements for Measurement of Electromagnetic Field Strength |
| ECT-RADIO | 12/RRA0818 | RRA Notice 2008-18, K only (Jun. 2, 2008) | Conformity Assessment Procedure for Electromagnetic Field Strength and Specific Absorption Rate (SAR) |
| ECT-RADIO | 12/RRA082 | RRA Notice 2008-2, K only (May 23,2008) | Conformity Assessment Procedure for Type Official Approval and Type Registration of Radio Equipment |
| ECT-RADIO | 12/RSS102 | RSS-102, Issue 2 (November 12, 2005) | using IEEE 1528 and/or IEEE C95.3 - Evaluation Procedure for Mobile and Portable Radio Transmiters with respect to Health Canada's Safety Code 6 for Exposure of Humans to Radio Frequency Fields |
| ECT-RADIO | 12/RSS102a | RSS-102, Issue 1 (September 25, 1999) | using IEEE 1528 and/or IEEE C95.3 - Evaluation Procedure for Mobile and Portable Radio Transmiters with respect to Health Canada's Safety Code 6 for Exposure of Humans to Radio Frequency Fields |
| ECT-RADIO | 12/RSS102b | RSS-102, Issue 3 (June 2009) | using IEEE 1528 and/or IEEE C95.3 - Evaluation Procedure for Mobile and Portable Radio Transmiters with respect to Health Canada's Safety Code 6 for Exposure of Humans to Radio Frequency Fields |
| ECT-RADIO | 12/RSS111 | RSS-111 Issue 1 (July 2006) | Broadband Public Safety Equipment |
| ECT-RADIO | 12/RSS111a | RSS-111, Issue 2 (June 2007) | Broadband Public Safety Equipment |
| ECT-RADIO | 12/RSS111b | RSS-111, Issue 3 (June 2009) | Broadband Public Safety Equipment Operating in the Band 4940-4990 MHz |
| ECT-RADIO | 12/RSS112 | RSS-112, Issue 1 (February 2008) | Land Mobile and Fixed Equipment Operating in the Band 1670-1675 MHz |
| ECT-RADIO | 12/RSS117 | RSS-117, Issue 2 (March 30, 1974) | Land and Coast Station Transmitters Using A1, A2, A3, A2H or A3H Emissions Operating in the 200 - 535 kHz Band |
| ECT-RADIO | 12/RSS118 | RSS-118, Issue 2, Addendum & Amendment (August 19, 1990) | Land and Subscriber Stations: Voice, Data, and Tone Modulated, Angle Modulation Radiotelephone Transmitters and Receivers Operating in the Cellular Mobile Bands 824-849 MHz and 869-894 MHz |
| ECT-RADIO | 12/RSS118a | RSS-118, Annex A (October 22, 1983) | Cellular System Mobile Station Land Station Compatibility Standard |
| ECT-RADIO | 12/RSS118b | RSS-118, Addendum (September 1, 1990) | |
| ECT-RADIO | 12/RSS118c | RSS-118, Supplement 1993-1 (June 12 1993) | |
| ECT-RADIO | 12/RSS118d | RSS-118, Amendment #2, Issue 2, (August 24 1996) | |
| ECT-RADIO | 12/RSS119 | RSS-119, Issue 6 (March 25, 2000) | Land Mobile and Fixed Radio Transmitters and Receivers, 27.41 to 960 MHz |
| ECT-RADIO | 12/RSS119a | RSS-119, Issue 8 (September, 2006) | Land Mobile and Fixed Radio Transmitters and Receivers, 27.41 to 960 MHz |
| ECT-RADIO | 12/RSS119b | RSS-119, Issue 9 (June 2007) | Land Mobile and Fixed Radio Transmitters and Receivers, 27.41 to 960 MHz |
| ECT-RADIO | 12/RSS123 | RSS-123, Issue 1, Rev. 2 (November 6, 1999) | Low Power Licensed Radiocommunication Devices |
| ECT-RADIO | 12/RSS125 | RSS-125 (March 25, 2000) | Land Mobile and Fixed Radio Transmitters and Receivers, 1.705 to 50.0 MHz, Primarily Amplitude Modulated |
| ECT-RADIO | 12/RSS125a | RSS-125 Issue 2, Revision 1 (March 25, 2000) | Land Mobile and Fixed Radio Transmitters and Receivers, 1.705 to 50.0 MHz, Primarily Amplitude Modulated |
| ECT-RADIO | 12/RSS127 | RSS-127, Issue 1 (August 2009) | Air-Ground Equipment Operating in the Bands 849-851 MHz and 894-896 MHz |
| ECT-RADIO | 12/RSS128 | RSS-128 (November 6, 1999) | 800 MHz Dual-Mode TDMA Cellular Telephones |
| ECT-RADIO | 12/RSS128a | RSS-128, Issue 2, Revision 1 (November 6, 1999) | 800 MHz Dual-Mode TDMA Cellular Telephones |
| ECT-RADIO | 12/RSS129 | RSS-129, Issue 2 (September 25, 1999) | 800 MHz Dual-Mode CDMA Cellular Telephones |
| ECT-RADIO | 12/RSS129a | RSS-129, Issue 2 (September 25, 1999) | 800 MHz Dual-Mode CDMA Cellular Telephones - (limited to TX conducted and radiated power and RX - TX radiated spurious emissions) |
| ECT-RADIO | 12/RSS130 | RSS-130, Issue 2 (January 23, 1993) | Digital Cordless Telephones in the Band 944 to 948.5 MHz |
| ECT-RADIO | 12/RSS130a | RSS-130, Annex 1, Issue 2 (January 23, 1993) - CT2Plus Class | Specification for the Canadian Common Air Interface for Digital Cordless Telephony, Including Public Access Services |
| ECT-RADIO | 12/RSS130b | RSS-130, Attachment 1 (January 23, 1993) | European Telecommunications Standards Institute Interim Standard #1-ETS300131 (April 1992) Radio Equipment and System Common Air Interface Specification to be Used for the Interworking between Cordless Telephone Apparatus 864.1 to 868.1 MHz |
| ECT-RADIO | 12/RSS131 | RSS-131, Issue 2 (July 2003) | Zone Enhancers for the Land Mobile Service |
| ECT-RADIO | 12/RSS132 | RSS-132, Issue 2 (September 2005) | Cellular Telephones Employing New Technologies Operating in the Bands 824 - 849 MHz and 869 - 894 MHz |
| ECT-RADIO | 12/RSS133 | RSS-133, Issue 3 (June 2005) | 2GHz Personal Communications Services |
| ECT-RADIO | 12/RSS133a | RSS-133, Issue 2, Rev 1 (November 6, 1999) | 2GHz Personal Communications Services - (limited to TX conducted and radiated power and RX - TX radiated spurious emissions) |
| ECT-RADIO | 12/RSS133b | RSS-133, Issue 4 (February 2008) | 2GHz Personal Communications Services |
| ECT-RADIO | 12/RSS133d | RSS-133, Issue 5 (February 2009) | 2GHz Personal Communications Services |
| ECT-RADIO | 12/RSS134 | RSS-134, Issue 1, Rev. 1 (March 25, 2000) | 900 MHz Narrowband Personal Communication Service |
| ECT-RADIO | 12/RSS135 | RSS-135, Issue 1 (October 26, 1996) | Digital Scanner Receivers |
| ECT-RADIO | 12/RSS135a | RSS-135, Issue 2 (June 2009) | Digital Scanner Receivers |
| ECT-RADIO | 12/RSS136 | RSS-136, Issue 5 (October 2002) | Land and Mobile Station Radiotelephone Transmitters and Receivers Operating in the 26.960 - 27.410 MHz General Radio Service Band |
| ECT-RADIO | 12/RSS137 | RSS-137, Issue 1, Rev. 1 (September 25, 1999) | Location and Monitoring Service (902 - 928 MHz) |
| ECT-RADIO | 12/RSS137a | RSS-137, Issue 2 (February 2009) | Location and Monitoring Service (902 - 928 MHz) |
| ECT-RADIO | 12/RSS138 | RSS-138, Issue 1 (February 7, 2004) | Commercial Shipborne Radar in the 2900 - 3100 MHz, 5470 - 5650 MHz and 9225 - 9500 MHz Bands |
| ECT-RADIO | 12/RSS139 | RSS-139, Isssue 1 (February 5, 2008) | Advanced Wireless Services Equipment Operating in the Bands 1710-1755 MHz and 2110-2155 MHz |
| ECT-RADIO | 12/RSS139a | RSS-139, Isssue 2 (February 2009) | Advanced Wireless Services Equipment Operating in the Bands 1710-1755 MHz and 2110-2155 MHz |
| ECT-RADIO | 12/RSS141 | RSS-141, Issue 1, Revision 1 (February 7, 2004) | Aeronautical Radiocommunication Equipment in the Frequency Band 117.975 - 137 MHz |
| ECT-RADIO | 12/RSS142 | RSS-142, Issue 2 (August 2002) | Narrowband Multipoint Communication Systems in the 1,427 - 1,430 MHz and 1,493.5 - 1,496.5 MHz Bands |
| ECT-RADIO | 12/RSS142a | RSS-142, Issue 3 (December 2007) | Narrowband Multipoint Communication Systems in the 1,427 - 1,430 MHz and 1,493.5 - 1,496.5 MHz Bands |
| ECT-RADIO | 12/RSS170 | RSS-170, Issue 1, Rev. 1 (November 6, 1999) | Satellite Mobile Earth Stations |
| ECT-RADIO | 12/RSS181 | RSS-181, Issue 1, (April 1, 1971) + Amendment (July 1987) | Coast and Ship Station Single Sideband Radiotelephone Transmitters and Receivers Operating in the 1,605 - 28,000 kHz Band |
| ECT-RADIO | 12/RSS182 | RSS-182, Issue 4 (2003) | Maritime Radio Transmitters and Receivers in the Band 156 - 162.5 MHz |
| ECT-RADIO | 12/RSS187 | RSS -187, Issue 3, Rev. 2 (March 25, 2000) | Emergency Position Indicating Radio Beacons, Emergency Locator Transmitters and Personal Locator Beacons |
| ECT-RADIO | 12/RSS188 | RSS-188, Issue 1 (August 24, 1996) | Global Maritime Distress and Safety System (GMDSS) |
| ECT-RADIO | 12/RSS191 | RSS-191, Issue 2 (August 2002) | Local Multipoint Communication Systems in the 28 GHz Band; Point-to-Point and Point-to-Multipoint Broadband Communication Systems in the 24 GHz and 38 GHz Bands |
| ECT-RADIO | 12/RSS191a | RSS-191, Issue 3 (April 2008) | Local Multipoint Communication Systems in the 28 GHz Band; Point-to-Point and Point-to-Multipoint Broadband Communication Systems in the 24 GHz and 38 GHz Bands |
| ECT-RADIO | 12/RSS192 | RSS-192, Issue 2 (2004) | Fixed Wireless Access Systems in the Band 3450 - 3650 MHz |
| ECT-RADIO | 12/RSS192a | RSS-192, Issue 3 (January 2008) | Fixed Wireless Access Systems in the Band 3450 - 3650 MHz |
| ECT-RADIO | 12/RSS193 | RSS-193, Issue 1 (July 2003) | Multipoint and Point-to-Point Communication Systems (MCS) in the Fixed Service Operating in the 2,150 - 2,160 MHz, 2,500 - 2,596 MHz and 2,686 - 2,690 MHz Bands |
| ECT-RADIO | 12/RSS194 | RSS-194, Issue 1 (October 2007) | Fixed Wireless Access Equipment Operating in the Band 953-960 MHz |
| ECT-RADIO | 12/RSS195 | RSS-195, Issue 1 (January 2004) | Wireless Communications Service Equipment Operating in the Bands 2305 - 2320 MHz and 2345-2360 MHz |
| ECT-RADIO | 12/RSS210 | RSS-210, Issue 6 (Sept. 2005) | Low Power Licence-Exempt Radiocommunication Devices (All Frequency Bands): Category 1 Equipment |
| ECT-RADIO | 12/RSS210a | RSS-210, Issue 7 (June 2007) | Low Power Licence-Exempt Radiocommunication Devices (All Frequency Bands): Category 1 Equipment |
| ECT-RADIO | 12/RSS212 | RSS-212, Issue 1 (February 27, 1999) | Test Facilities and Test Methods for Radio Equipment |
| ECT-RADIO | 12/RSS213 | RSS-213, Issue 1 (April 24, 1999) | 2 GHz Licence-Exempt Personal Communications Service Devices (PCS) |
| ECT-RADIO | 12/RSS213a | RSS-213 Issue 2 (December 2005) | 2 GHz Licence-Exempt Personal Communications Service Devices (PCS) |
| ECT-RADIO | 12/RSS215 | RSS-215, Issue 1 (November 6, 1999) | Analogue Scanner Receivers |
| ECT-RADIO | 12/RSS215a | RSS-215, Issue 2 (June 2009) | Analogue Scanner Receivers |
| ECT-RADIO | 12/RSS220 | RSS-220, Issue 1 (March 2009) | Devices using Ultra-Wideband (UWB) Technology |
| ECT-RADIO | 12/RSS243 | RSS-243, Issue 2 (November 12, 2005) | Active Medical Implant Communications System Devices in the 402 - 405 MHz Band |
| ECT-RADIO | 12/RSS287 | RSS-287, Issue 1 (February 2007) | Emergency Position Indicating Radio Beacons (EPIRB), Emergency Locator Transmitters (ELT), Personal Locator Beacons (PLB), and Maritime Survivor Locator Devices (MSLD) |
| ECT-RADIO | 12/RSS310 | RSS-310, Issue 1 ( Sept. 2005) | Low Power Licence-Exempt Radiocommunication Devices (All Frequency Bands): Category II Equipment |
| ECT-RADIO | 12/RSS310a | RSS-310, Issue 2 (June 2007) | Low Power Licence-Exempt Radiocommunication Devices (All Frequency Bands): Category II Equipment |
| ECT-RADIO | 12/RSSG2 | RSS-Gen, Issue 2 (June 2007) | General Requirements and Information for the Certification of Radiocommunication Equipment |
| ECT-RADIO | 12/RSSgen | RSS-Gen, Issue 1 (Sept. 2005) | General Requirements and Information for the Certification of Radiocommunication Equipment |
| ECT-RADIO | 12/TW01 | IS2031-0 (2001) | Type I Telecommunications Business Point to Point Microwave Base Station RF Equipment Type Approval Technical Specifications |
| ECT-RADIO | 12/TW02 | IS2034-0 (2001) | Fixed Communications Business Local Multipoint Distribution Service Microwave Base Station RF Equipment Type Approval Technical Specifications |
| ECT-RADIO | 12/TW03 | IS2035-0 (2002) | Third Generation Mobile Communications Base Station RF Equipment Type Approval Technical Specifications |
| ECT-RADIO | 12/TW04 | IS2036-0 (2002) | Third Generation Mobile Communications Repeater RF Equipment Type Approval Technical Specifications |
| ECT-RADIO | 12/TW05 | PLMN01 (2001) | GSM900 and DCS1800 Radio Terminal Equipment Technical Specifications |
| ECT-RADIO | 12/TW05a | PLMN01 (2003) | GSM900 and DCS1800 Radio Terminal Equipment Technical Specifications |
| ECT-RADIO | 12/TW06 | PLMN04 (2001) | Trunked Radio Terminal Equipment Technical Specifications |
| ECT-RADIO | 12/TW06a | PLMN04 (2003) | Trunked Radio Terminal Equipment Technical Specifications |
| ECT-RADIO | 12/TW07 | PLMN05 (2001) | Mobile Data Radio Terminal Equipment Technical Specifications |
| ECT-RADIO | 12/TW07a | PLMN05 (2003) | Mobile Data Radio Terminal Equipment Technical Specifications |
| ECT-RADIO | 12/TW08 | PLMN06 (2001) | Paging Receiver Radio Terminal Equipment Technical Specifications |
| ECT-RADIO | 12/TW08a | PLMN06 (2003) | Paging Receiver Radio Terminal Equipment Technical Specifications |
| ECT-RADIO | 12/TW09 | PLMN08 (2003) | The Third Generation Mobile Telecommunication Terminal Equipment Technical Specifications |
| ECT-RADIO | 12/TW09a | PLMN08 (2003) | The Third Generation Mobile Telecommunication Terminal Equipment Technical Specifications |
| ECT-RADIO | 12/TW10 | RTTE01 (2003) | 2.4GHz Radio-frequency Telecommunications Terminal Equipment Technical Specification |
| ECT-RADIO | 12/TW10a | RTTE01 (2003) | 2.4GHz Radio-Frequency Telecommunications Terminal Equipment Technical Specification |
| ECT-RADIO | 12/TW11 | LP0001 (1998) | Low-power Radio-frequency Devices Type-approval Guidelines |
| ECT-RADIO | 12/TW11a | LP0001 (2003) | Low-Power Radio-Frequency Devices Type-Approved Guidelines |
| ECT-RADIO | 12/WIFIIOP | Wi-Fi Alliance 802.11 with WPA2, WPA, and WEP System Interop | 802.11 with WPA2, WPA, and WEP System Interoperability Test Plan With ASD Test Engine For IEEE 802.11a, b, & g Devices, Version 1.3.3 |
| ECT-RADIO | 12/WIFINSY | Wi-Fi Alliance Wi-Fi 802.11n System Interoperability TP | Wi-Fi 802.11n System Interoperability Test Plan, Version 0.3.3 |
| ECT-RADIO | 12/WIFISYS | Wi-Fi Alliance WMM System Interoperability TP, Ver 1.3.3 | WMM System Interoperability Test Plan, Version 1.3.3 |
| ECT-RADIO | 12/WIFIWMM | Wi-Fi Alliance WMM Power Save System Interoperability TP | WMM Power Save System Interoperability Test Plan, Version 1.1.2 |
| ECT-RADIO | 12/WIFIWPS | Wi-Fi Alliance Wi-Fi WPS Test Plan, Version 1.0 | Wi-Fi WPS Test Plan, Version 1.0 |
| ECT-RADIO | 12/ZIGMAC1 | TUV Rheinland Group TSS and TP for MAC of IEEE 802.15.4 Inte | TUV Rheinland Group, Test Specification, Test Suite Structure (TSS) and Test Purposes (TP) for MAC of IEEE 802.15.4 Interoperability |
| ECT-RADIO | 12/ZIGPHY1 | TUV Rheinland Test Specification TSS and TP for PHY IEEE 802 | TUV Rheinland Group, Test Specification, Test Suite Structure (TSS) and Test Purposes (TP) for PHY/Radio of IEEE 802.15.4 |
| ECT-RADIO | 12/ZIGPLAT | ZigBee Alliance, Zigbee Compliant Platform Test Spec Ver 1.0 | ZigBee Alliance, Zigbee Compliant Platform Test Specification for Home Controls Version 1.0, Zigbee Document 064207r06, April 3, 2007 |
| ECT-RADIO | 12/ZIGPROF | ZigBee Alliance, Manufacturer Specific Profile (Feb 2007) | ZigBee Alliance, Manufacturer Specific Profile Test Specifications, Zigbee Document 064711r01, February 26, 2007 |
| ECT-SAFETY | 12/14958 | CNS 14958-1 (2005) | Huamn Exposure to RF Fields from hand-held and body-mounted wireless communication devices - Huamn models. instrumentation, and procedures-Part 1: Procedure to measure the Specific Absorption Rate (SAR) for hand-held mobile wireless devices |
| ECT-SAFETY | 12/1528 | IEEE Std 1528 (2003) | IEEE Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques |
| ECT-SAFETY | 12/1528a | IEEE Standard 1528 (2003) including Ammendment 1 | IEEE Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques |
| ECT-SAFETY | 12/50357 | EN 50357:2001 | Evaluation of Human Exposure to EM Fields from Devices used in Electronic Article Surveillance |
| ECT-SAFETY | 12/50360 | EN 50360 (2001) | Product standard to demonstrate the compliance of mobile phones with the basic restrictions related to human exposure to electromagnetic fields (300 MHz - 3 GHz) |
| ECT-SAFETY | 12/50361 | EN 50361 (2001) | Basic standard for the measurement of Specific Absorption Rate related to human exposure to electromagnetic fields from mobile phones (300 MHz - 3 GHz) |
| ECT-SAFETY | 12/50364 | EN 50364 (2001) | Limitation of human exposure to electromagnetic fields from devices operating in the frequency range 0 Hz to 10 GHz, used in Electronic Article Surveillance (EAS), Radio Frequency Identification (RIF) and similar applications |
| ECT-SAFETY | 12/50371 | EN 50371 (2002) | Generic standard to demonstrate the compliance of low power electronic and electric apparatus with the basic restrictions related to human exposure to electromagnetic fields (300 MHz - 3 GHz) |
| ECT-SAFETY | 12/50383 | EN 50383:2002 | Basic Standard for the calculation and measurement of electromagnetic field strength and SAR related to human exposure from radio base stations and fixed terminal stations for wireless telecommunication system (110 MHz - 40 GHz) |
| ECT-SAFETY | 12/60215 | EN 60215 (1989) and IEC 215 (1987)+ A1 (1992) + A2 (1994) | Safety requirements for radio transmitting equipment |
| ECT-SAFETY | 12/62209a | IEC 62209 (2001) | Procedure to measure the Specific Absorption Rate (SAR) for hand-held mobile wireless devices in the frequency range of 300 MHz to 3 GHz |
| ECT-SAFETY | 12/62209b | IEC 62209-1 (Feb 2005) | Huamn Exposure to RF Fields from hand-held and body-mounted wireless communication devices - Huamn models. instrumentation, and procedures - Part 1: Procedure to measure the Specific Absorption Rate (SAR) for hand-held mobile wireless devic |
| ECT-SAFETY | 12/62209c | EN 62209-1 (2006) | Huamn Exposure to RF Fields from hand-held and body-mounted wireless communication devices - Huamn models. instrumentation, and procedures-Part 1: Procedure to measure the Specific Absorption Rate (SAR) for hand-held mobile wireless devices |
| ECT-SAFETY | 12/62233 | IEC 62233 (2005-10) | Measurement methods for electromagnetic fields of household appliances and similar apparatus with regard to human exposure |
| ECT-SAFETY | 12/62233a | EN 62233 (2008) | Measurement methods for electromagnetic fields of household appliances and similar apparatus with regard to human exposure |
| ECT-SAFETY | 12/62311 | EN 62311 (2008) | Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz - 300 GHz) |
| ECT-SAFETY | 12/C95 | IEEE Std C95.3 (2002) | IEEE Recommended Practice for Measurements and Computations of Radio Frequency Electronmagnetic Fields With Respect to Human Exposure to Such Fields, 100 kHz - 300 GHz |
| ECT-SAFETY | 12/C95a | IEEE C95.1- 1991 | IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3kHz to 300 GHz |
| ECT-SAFETY | 12/C95b | IEEE C95.1 -1999 | IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3kHz to 300 GHz |
| ECT-SAFETY | 12/C95c | IEEE Std C95.1 (2005) | IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz |
| ECT-SAFETY | 12/H46 | H46-2/99-273E | Limits of Human Exposure to Radiofrequency Electromagnetic Fields in the Frequency Range From 3 kHZ to 300 GHz - Safety Code 6 (Canada) |
| ECT-SAFETY | 12/KR67 | RRL Notice No. 2004-67 | Technical Requirements for the Measurement of Specific Absorption Rate |
| ECT-SAFETY | 12/OET65 | OET Bulletin 65, Edition 97-01 (August 1997) | Evaluating Compliance with FCC Guidelines for Human Exposure to Radiofrequency Electromagnetic Field |
| ECT-SAFETY | 12/OET65c | Supplement C, Edition 01-01 to OET Bulletin 65,Edition 97-01 | Additional Information for Evaluating Compliance of Mobile and Portable Devices with FCC Limits for Human Exposure to Radiofrequency Emissions |
| ECT-SAFETY | 12/P1528 | IEEE P1528/D1.2 (April 21, 2003) | Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques |
| ECT-TTM | 12/1089a | GR-1089-CORE, Issue 3 (October 2002) | Electromagnetic Compatibility and Electrical Safety - Generic Criteria for Network Telecommunications Equipment (sections 2, 3.3, and 3.5) |
| ECT-TTM | 12/1089b | GR-1089-CORE, Issue 3 (October 2002) | Electromagnetic Compatibility and Electrical Safety - Generic Criteria for Network Telecommunications Equipment (sections 3.2 and 3.4) |
| ECT-TTM | 12/1089c | GR-1089-CORE, Issue 3 (October 2002) | Electromagnetic Compatibility and Electrical Safety - Generic Criteria for Network Telecommunications Equipment (sections 2.1, 2.2, and 4-9) |
| ECT-TTM | 12/1089d | GR-1089-CORE, Issue 3 (April 2002) | EMC and Electrical Safety - Generic Criteria for Network Telecommunications Equipment (sections: 2.1.2.1, 2.1.2.2, 2.1.4, 2.2, 3.2, 3.3, 4.6.2, 4.6.5, 4.6.7 - 4.6.17, 4.7, 5.2, 5.3.1, 5.4, 6, 7.2 - 7.7, 8, and 9.2 - 9.12) |
| ECT-TTM | 12/1089e | GR-1089-CORE, Issue 3 (October 2002) | Electromagnetic Compatibility and Electrical Safety - General Criteria for Network Telecommunications Equipment (all sections except 9.12) |
| ECT-TTM | 12/1089f | GR-1089-CORE, Issue 3 (October 2002) | Electromagnetic Compatibility and Electrical Safety - Generic Criteria for Network Telecommunications Equipment (sections: 2, 3.2.1, 3.2.2, 3.2.3, 3.2.4, 3.3.1, 3.3.3, 4, 5, 6, 7, 8, 9, 9.10.3, 9.10.4, 9.10.5, 9.10.6) |
| ECT-TTM | 12/1089g | GR-1089-CORE, Issue 4 (June 2006) | Electromagnetic Compatibility and Electrical Safety - General Criteria for Network Telecommunications Equipment |
| ECT-TTM | 12/201468 | ETSI ES 201 468 v1.3.1 (2005-08) | Electromagnetic compatibility and Radio spectrum Matters (ERM); Additional ElectroMagnetic Compatibility (EMC) requirements and resistibility requirements for telecommunications equipment for enhanced availability of service in specific app |
| ECT-TTM | 12/2018a | IS 2018-1 (Nov. 23, 1998) | 284.5 MHz - 285.5 MHz Radio Paging Receiver, Type Approval Guidelines |
| ECT-TTM | 12/300019a | ETSI EN 300 019-2-1 v2.1.2 (2000-09): Equipment Engineering | Environmental conditions and environmental tests for telecommunications equipment ; Part 2-1: Specification of environmental tests: Storage (excluding chemically and mechanically active substances, flora, and fauna) |
| ECT-TTM | 12/300019b | ETSI EN 300 019-2-2 v2.1.2 (1999-09): Equipment Engineering | Environmental conditions and environmental tests for telecommunications equipment; Part 2-2: Specification of environmental tests: Transportation (excluding chemically and mechanically active substances, flora, and fauna) |
| ECT-TTM | 12/300019c | ETSI EN 300 019-2-3 v2.2.2 (2003-04): Equipment Engineering | Environmental conditions and tests for telecommunications equipment; Part 2-3: Specification of environmental tests: Stationary use at weather protected locations (excluding chemicaly and mechanically active substances, flora, and fauna) |
| ECT-TTM | 12/300019d | ETSI EN 300-019-2-4 v2.2.2 (2003-04): Environmental | Engineering: Environmental Conditions and Environmental Tests for Telecommunications Equipment; Part 2-4: Specification of Environmental Tests; Sationary use at Non-Weatherprotected Locations |
| ECT-TTM | 12/300019e | ETSI EN 300 019-1-0 v2.1.2 (2003-09): Environmental | Engineering: Environmental Conditions and Environmental Tests for Telecommunications equipment; Part 1-0; Classification of Environmental Conditions |
| ECT-TTM | 12/300127 | EN 300 127 v1.2.1 (1999-04) | Electromagnetic compatibility and Radio spectrum Matters (ERM); Radiated emission testing of physically large telecommunication systems |
| ECT-TTM | 12/300132a | ETS 300 132-1 (September 1996) | Equipment Engineering (EE); Power supply interface at the input to telecommunications equipment; Part 1: Operated by alternating current (ac) derived from direct current (dc) sources |
| ECT-TTM | 12/300132b | ETSI EN 300 132-2 v2.1.2 (2003-09) | Environmental Engineering (EE); Power supply interface at the input to telecommunications equipment; Part 2: Operated by direct current (dc) |
| ECT-TTM | 12/300328 | ETSI EN 300 328 V1.4.1 (2003-4) | Electromagenetic compatibility and Radio spectrum Matters (ERM); Wideband Transmission systems; Data transmission equipment operating in the 2.4 GHz ISM band and using spread spectrum modulation techniques |
| ECT-TTM | 12/300386a | EN 300 386 V1.2.1 (2000-03) | Electromagnetic compatibility and radio spectrum matter (ERM); Telecommunication network equipment; Electromagnetic Compatibility (EMC) requirements |
| ECT-TTM | 12/300386b | EN 300 386 V1.3.1 (2001-09) | Electromagnetic compatibility and Radio spectrum Matters (ERM); Telecommunication network equipment; ElectroMagnetic Compatibility (EMC) requirements |
| ECT-TTM | 12/300386c | EN 300 386 V1.3.2 (2003-05) | Electromagnetic compatibility and Radio spectrum Matters (ERM); Telecommunication network equipment; ElectroMagnetic Compatibility (EMC) requirements |
| ECT-TTM | 12/300386d | EN 300 386-2 V1.1.3 (1997-12) | Electromagnetic compatibility and Radio spectrum Matters (ERM); Telecommunication network equipment; ElectroMagnetic Compatibility (EMC) requirements; Part 2: Product family standard |
| ECT-TTM | 12/300386e | EN 300 386-2 V1.2.2 (2000-03) | Electromagnetic compatibility and Radio spectrum Matters (ERM); Telecommunications network equipment; ElectroMagnetic Compatibility (EMC) requirements |
| ECT-TTM | 12/300386f | ETSI EN 300 386 V1.3.3 (2005-04) | Electromagnetic compatibility and Radio spectrum Matters (ERM); Telecommunication network equipment; ElectroMagnetic Compatibility (EMC) requirements |
| ECT-TTM | 12/300386g | ETSI EN 300 386 V1.4.1 (2008-02) | Electromagnetic compatibility and Radio spectrum Matters (ERM); Telecommunication network equipment; ElectroMagnetic Compatibility (EMC) requirements |
| ECT-TTM | 12/300577 | ETS 300 577, 15th edition (December 1999) | Digital cellular telecommunications system (Phase 2); Radio transmission and reception (GSM 05.05 version 4.23.1) |
| ECT-TTM | 12/300578 | ETS 300 578, 13th Edition (March 1999) | Digital cellular telecommunications system (Phase 2); Radio subsystem link control (GSM 05.08 version 4.22.1) |
| ECT-TTM | 12/300609a | ETS 200 609-4, 4th edition (March 1999) | Digital cellular telecommunications system (Phase 2 & Phase 2+); Base Station System (BSS) equipment specification; Part 4: Repeaters (GSM 11.26 version 5.2.1) |
| ECT-TTM | 12/300609b | ETSI EN 300 609-4, v8.0.2 (2000-10) | Digital cellular telecommunications system (Phase 2 & Phase 2+); Base Station System (BSS) equipment specification; Part 4: Repeaters (GSM 11.26 version 8.0.2 Release 1999) |
| ECT-TTM | 12/300826 | ETS 300 826 (November 1997) | Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) Standard for 2.4 GHz wideband transmission systems and HIgh PErformance Radio Local Area Network (HIPERLAN) equipment |
| ECT-TTM | 12/50121b | EN 50121-4 (2000) | EMC Part 4 - Emission and Immunity of the Signaling Telecommunications Apparatus |
| ECT-TTM | 12/50121c | EN 50121-3-2 (2000) | EMC Part 3-2: Rolling Stock Apparatus |
| ECT-TTM | 12/50155 | EN 50155 (2001) | Railway applications - Electronic equipment used on rolling stock |
| ECT-TTM | 12/50155a | EN 50155 (2001), A1 (2002) | Railway Applications - Electronic equipment used on rolling stock |
| ECT-TTM | 12/76200 | SBC-TP-76200, Issue 5 (May 2003) | Network Equipment Power, Grounding, Environmental, and Physical Design Requirements (sections 2.7 - .10, 3, 4.1, 4.3, 5.1, 6.1, 6.3, 7, 9.1, 10.3, and 11) |
| ECT-TTM | 12/76200a | SBC-TP-76200, Issue 5 (May 2003) | Network Equipment Power, Grounding, Environmental, and Physical Design Requirements (sections: 6.1B, 7.1, 7.2, 7.3, 7.4, and 10.1 - 10.4B) |
| ECT-TTM | 12/76200b | ATT-TP-76200, Issue 10 (August 2006) | Network Equipment Power, Grounding, Environmental, and Physical Design Requirements (sections 2.6 - 2.9, 4.1.1, 4.1.2, 4.1.4, 4.1.5, 4.1.6, 4.1.7, 4.1.8, 4.2.3, 4.3.1, 4.3.2, 4.5, 4.6, and 4.7) |
| ECT-TTM | 12/76200c | ATT-TP-76200, Issues 10 (2006-08) & Issue 11 (2007-08) | Network Equipment Power, Grounding, Environmental, and Physical Design Requirements (excluding sections 8.2, 10.5, 13.5) |
| ECT-TTM | 12/76200d | ATT-TP-76200, Issue 12 (June 20, 2008) | Network Equipment Power, Grounding, Environmental, and Physical Design Requirements (excluding sections 8.2, 10.5, 13.5) |
| ECT-TTM | 12/76200e | ATT-TP-76200, Issue 14 (April 14, 2009) | Network Equipment Power, Grounding, Environmental, and Physical Design Requirements (excluding sections 8.2, 10.5, 13.5) |
| ECT-TTM | Dec-05 | VZ.TPR.9205 Issue 3, September 2008 | Verizon NEBS (TM) Compliance: Energy Efficiency Requirements for Telecommunications Equipment |
| ECT-TTM | 12/ANSIT01 | ANSI T1.315-2001 | Voltage Levels for DC Powered Equipment Used in the Telecommunications Environment |
| ECT-TTM | 12/ATIS615 | ATIS-0600015.2009 | Energy Efficiency for Telecommunication Equipment: Methodology for Measurement and Reporting - General Requirements |
| ECT-TTM | 12/CS03 | CS-03 | Industry Canada Certification Specification 03:1999 (CS-03:1999): Specification for Terminal Equipment, Terminal Systems, Network Protection Devices, Connection Arrangements and Hearing Aids Compatibility |
| ECT-TTM | 12/CS03a | Industry Canada CS-03, Issue 9, Amendment 1 (2005) | Compliance Specification for Terminal Equipment, Terminal Systems, Network Protection Devices, Connection Arrangements and Hearing Aids Compatibility (Sections I, II, V only) |
| ECT-TTM | 12/CS03b | Industry Canada CS-03, Issue 9, +A2, +A3 | Compliance Specification for Terminal Equipment, Terminal Systems, Network Protection Devices, Connection Arrangements and Hearing Aids Compatibility |
| ECT-TTM | 12/CS03c | Industry Canada CS-03, Issue 9 Amendment 3 (2007) | Compliance Specification for Terminal Equipment, Terminal Systems, Network Protection Devices, Connection Arrangements and Hearing Aids Compatibility |
| ECT-TTM | 12/CS03d | Industry Canada CS-03, Issue 9 Amendment 4 (2009) | Compliance Specification for Terminal Equipment, Terminal Systems, Network Protection Devices, Connection Arrangements and Hearing Aids Compatibility |
| ECT-TTM | 12/DGT01 | DGT RTTE01 (2003) | 2.4GHz Radio-frequency Telecommunications Terminal Equipment Technical Specification |
| ECT-TTM | 12/DGT02 | DGT ID 0002 (2000) | DS1 Equipment Type Approval Guidelines |
| ECT-TTM | 12/DGT02a | DGT ID 0002 (2003) | DS1 Equipment Type Approval Guidelines |
| ECT-TTM | 12/DGT03 | DGT IS 6100 (2000) | ISDN CPE Type Approval Guidelines |
| ECT-TTM | 12/DGT03a | DGT IS 6100 (2006) + Rev. 1 (2007-07) | ISDN CPE Type Approval Guidelines |
| ECT-TTM | 12/DGT04 | DGT PSTN01 (2001) | Technical Specifications for Terminal Equipment for Connection to Public Switched Telephone Network |
| ECT-TTM | 12/DGT04a | DGT PSTN01 (2003) | Technical Specifications for Terminal Equipment for Connection to Public Switched Telephone Network |
| ECT-TTM | 12/FCC2a | TIA/EIA 603-C (2004) with 47 CFR Part 2 | Personal Mobile Radio Services in 47 CFR Parts 22 (cellular), 24, 25, 26, and 27 |
| ECT-TTM | 12/FCC2a1 | TIA/EIA 603-C (2004) with 47 CFR Part 2 | Personal Mobile Radio Services in 47 CFR Part 22 (cellular) and Part 24 - (limited to TX conducted and radiated power and RX - TX radiated spurious emissions) |
| ECT-TTM | 12/FCC2a2 | TIA/EIA 603-C (2004) with 47 CFR Part 2 | Public Mobile Services in 47 CFR Part 22 |
| ECT-TTM | 12/FCC2b | TIA/EIA 603-C (2004) with 47 CFR Part 2 | General Mobile Radio Services in 47 CFR Parts 22 (non-cellular), 74, 90, 95, and 97 |
| ECT-TTM | 12/FCC2b1 | TIA/EIA 603-C (2004) with 47 CFR Part 2 | General Mobile Radio Services in 47 CFR Part 90 |
| ECT-TTM | 12/FCC2b2 | TIA/EIA 603-C (2004) with 47 CFR Part 2 | Private Land Mobile Radio Services in 47 CFR Part 90 |
| ECT-TTM | 12/FCC2c | TIA/EIA 603-C (2004) with 47 CFR Part 2 | Maritime and Aviation Radio Services in 47 CFR Parts 80 and 87 |
| ECT-TTM | 12/FCC2d | TIA/EIA 603-C (2004) with 47 CFR Part 2 | Microwave Radio Services in 47 CFR Parts 27, 74, and 101 |
| ECT-TTM | 12/FCC2d1 | TIA/EIA 603-C (2004) with 47 CFR Part 2 | Experimental Radio, Auxiliary, Special Broadcast and Other Program Distributional Services in 47 CFR Part 74 |
| ECT-TTM | 12/FCC2d2 | TIA/EIA 603-C (2004) with 47 CFR Part 2 | Microwave Radio Services in 47 CFR Parts 21, 27, 74, and 101 |
| ECT-TTM | 12/FCC2d3 | TIA/EIA 603-C (2004) with 47 CFR Part 2 | Microwave Radio Services in 47 CFR Part 27 |
| ECT-TTM | 12/FCC2e1 | TIA/EIA 603-C (2004) with 47 CFR Part 2 | International Fixed Public Radiocommunication Services in 47 CFR Part 23 |
| ECT-TTM | 12/GR1089 | GR-1089-CORE, Issue 3 (October 2002) | Electromagnetic Compatibility and Electrical Safety - Generic Criteria for Network Telecommunications Equipment |
| ECT-TTM | 12/GR1089a | GR-1089-CORE, Issue 1 (Nov 1994), rev. 1, (Dec 1996) | Electromagnetic Compatibility and Electrical Safety - Generic Criteria for Network Telecommunications Equipment |
| ECT-TTM | 12/GR1089b | GR-1089-CORE, Issue 4 (June 2006) | EMC and Electrical Safety - Criteria for Network Telecom Equipment (sections 2.1, 2.2, 3.2, 3.2.3, 3.2.4, 3.3, 3.3.1, 4.5, 4.5A, 5.2, 5.3, 6.0, 8.0, 9.0, 10.0) |
| ECT-TTM | 12/GR487a | GR-487-CORE | Bellcore Generic Requirements for Electronic Equipment Cabinets - all sections except 3.5 (R3-22, 24, 25); 3.6 (R3-29, 32-35); 3.28; 3.32; 3.33; and 3.34 (R3-203) |
| ECT-TTM | 12/GR487b | GR-487-CORE, Issue 2, (November 1998) | Gen. Reqs for Electronic Equipment Cabinets (Sections 3.1, 3.2, 3.3, 3.4, 3.5 excluding R3-21, 3.6, 3.6.2, 3.6.3, 3.6.4, 3.6.5, 3.6.6, 3.7 - 3.18, 3.19 excluding R3-130, 3.21 - 3.27, 3.28.1-4, 3.29 - 3.31, 3.34.1-2, 3.35.1, 3.35.3-6) |
| ECT-TTM | 12/GR487c | GR-487-CORE, Issue 3, (April 2009) | Gen. Reqs for Electronic Equipment Cabinets (Sections 2, 3.1-3.13, 3.15-3.23, 3.25-3.39, excluding R3-24 and R3-142) |
| ECT-TTM | 12/GR49 | GR-49-CORE, Issue 2 (November 1998) | Generic Requirements for Outdoor Telephone Network Interface Devices (NIDs) |
| ECT-TTM | 12/GR49a | GR-49-CORE, Issue 2 (November 1998) | General Requirements for Outdoore Telephone Network Interface Devices (NIDS) (sections 2.1, 2.2, 2.3.1-2.3.2, 2.4-2.7, 2.9-2.11, 3.1-3.4, 3.7.1-3.7.3, 4.1-4.4, 5.1, 5.4-5.12, 5.15-5.20, 6.1.3, 6.2.3, 6.2.4, 6.2.7, 6.2.8) |
| ECT-TTM | 12/GR63 | GR-63-CORE, Issue 2 (April 2002) | NEBS (TM) Requirements: Physical Protection (sections: 2, 3, 4.1.1, 4.1.2, 4.1.4, 4.2.3, 4.3.1, 4.3.2, 4.5, 4.6, and 4.7) |
| ECT-TTM | 12/GR63a | GR-63-CORE, Issue 2 (April 2002): NEBS (TM) Requirements | Physical Protection (sections: 2, 3, 4.1, 4.2.3, 4.3, 4.4.1, 4.4.3, 4.4.4, 4.5, 4.6, and 4.7) |
| ECT-TTM | 12/GR63b | GR-63-CORE, Issue 2 (April 2002) | NEBS (TM) Requirements: Physical Protection (all sections except 4.1.3, 4.2, and 4.5) |
| ECT-TTM | 12/GR63c | GR-63-CORE, Issue 2 (April 2002) | NEBS (TM) Requirements: Physical Protection |
| ECT-TTM | 12/GR63d | GR-63-CORE, Issue 2 (April 2002) | NEBS (TM) Requirements: Physical Protection (sections: 4.1.1, 4.1.2, 4.1.4, 4.2.2, 4.2.3, 4.3.1, 4.3.2, 4.4.3, 4.4.4, 4.6, 4.7.2, 5.2) |
| ECT-TTM | 12/GR63e | GR-63-CORE, Issue 3 (March 2006) | NEBS (TM) Requirements: Physical Protection (sections: 2, 4.1, 4.2.3, 4.3, 4.4, 4.5, 4.6, and 4.7) |
| ECT-TTM | 12/GR63f | GR-63-CORE, Issue 3 (March 2006) | NEBS (TM) Requirements: Physical Protection (sections 5.1.1.1, 5.1.1.2, 5.1.1.3, 5.1.2, 5.1.2a, 5.1.3, 5.1.4, 5.1.5, 5.3.1, 5.3.2, 5.4.1.4, 5.4.1.5a, 5.4.1.5b, 5.4.2, 5.4.3, 5.5.3, 5.5.3a, 5.6, 5.7) |
| ECT-TTM | 12/GR950 | GR-950-CORE, Issue 2 (December 1998) | General Requirements for Optical Network Unit (ONU) Closures |
| ECT-TTM | 12/GR950a | GR-950-CORE, Issue 2 (December 1998) | Gen Reqs for Optical Network Unit (ONU) Closures (sections 3.1.1, 3.1.2, 3.2.1, 3.2.2, 3.2.3, 4.1.1-4.1.8, 4.5.1-4.5.3, 5.2.1, 5.2.2, 5.2.2, 5.2.4, 5.2.5, 5.2.6, 5.3.1, 5.3.2, 5.4.1-5.4.8, 5.5.1-5.5.9, 5.6) |
| ECT-TTM | 12/IDA37 | IDA TS ADSL, Issue 1, (July 2005) | Technical Specification for Asymmetric Digital Subscriber Line (ADSL) Modems |
| ECT-TTM | 12/IDA37a | IDA TS ADSL, Issue 1, Rev. 1 (April 2006) | Technical Specification for Asymmetric Digital Subscriber Line (ADSL) Modems |
| ECT-TTM | 12/IDA39 | IDA TS BISDN, Issue 1 (July 2005) | Technical Specifications for connecting to the Broadband Integrated Services Digital Network (BISDN) |
| ECT-TTM | 12/IDA40 | IDA TS CM, Issue 1 (July 2005) | Technical Specification for Cable Modems (CM) connected to the Radio-Frequency Interface of the High-speed Data-Over-Cable Systems (DOCSIS 1.1) |
| ECT-TTM | 12/IDA41 | IDA TS DLCN, Issue 1 (July 2005) | Technical Specification for Digital Interfaces based on hierarchical bit rates of 2048 kbit/s, 34 368 kbit/s and 139 264 kbit/s |
| ECT-TTM | 12/IDA42 | IDA TS ISDN BA, Issue 1 (July 2005) | Technical Specification for connecting to the Integrated Services Digital Network (ISDN) using Basic Access |
| ECT-TTM | 12/IDA43 | IDA TS ISDN PRA, Issue 1 (July 2005) | Technical Specification for connecting to the Integrated Services Digital Network (ISDN) using Primary Rate Access |
| ECT-TTM | 12/IDA44 | IDA TS ISDN 3 (Oct. 2000) | Type Approval Specification for Network Termination 1 (NT1) for connection to the ISDN Basic Access interface |
| ECT-TTM | 12/IDA45 | IDA TS PSTN, Issue 1 (July 2005) | Technical Specification for Terminal Equipment connecting to the Public Switched Telephone Network (PSTN) |
| ECT-TTM | 12/IDA45a | IDA TS-PSTN, Issue 1 (March 2007) | Technical Specification for Terminal Equipment connecting to the Public Switched Telephone Network (PSTN) |
| ECT-TTM | 12/IDA46 | IDA TS ACLIP, Issue 1 (July 2005) | Technical Specification for Analogue Calling Line Identification Presentation Facility for connection to Public Switched Telephone Network (PSTN) |
| ECT-TTM | 12/IDA47 | IDA TS TLXN 1 (Dec. 1999) | Type Approval Specification for connection of Terminal Equipment to Telex Network (TLXN) |
| ECT-TTM | 12/IDA49 | IDA TS GSM-BS, Issue1 (July 2005) | Technical Specification for GSM Base Station and Repeater Equipment |
| ECT-TTM | 12/IDA50 | IDA TS WBA, Issue 1 (June 2005) | Technical Specification for Wireless Broadband Access Equipment |
| ECT-TTM | 12/IDAe | IDA TS EMC, Issue 1, Rev. 1 (March 2000) | EMC Requirements for Telecommunication Equipment |
| ECT-TTM | 12/IE269 | IEEE Std 269 (2002) | IEEE Standard Methods for Measuring Transmission Performance of Analog and Digital Telephone Sets, Handsets, and Headsets |
| ECT-TTM | 12/IETS01 | I-ETS 300 489-1 (October 1996) | Terminal Equipment (TE); Conformance testing for file transfer over the Integrated Services Digital Network (ISDN); Part 1: Profile Test Specification Summary (PTS-Summary) for the FTAM profile (ETS 300 388) |
| ECT-TTM | 12/ITUK21 | ITU-T K.21 (10/2000) Series K | Protection Against Interference - Resistibility of telecommunication equipment installed in customer premises to overvoltages and overcurrents |
| ECT-TTM | 12/ITUK21a | ITU-T K.21 (07/2003) Series K | Protection Against Interference - Resistibility of telecommunication equipment installed in customer premises to overvoltages and overcurrents |
| ECT-TTM | 12/K20 | ITU-T K.20 (07/2003) Series K | Protection Against Interference - Resistibility of telecommunication equipment installed in a telecommunications centre to overvoltages and overcurrents |
| ECT-TTM | 12/KCC0894 | KCC Notice 2008-94, K only (Jul. 3, 2008) | Technical Requirements for CATV Equipment |
| ECT-TTM | 12/KN20664 | Presidential Decree 20664, K Only (Feb. 29, 2008) | Rules on the Technical Requirements for Telecommunications Terminal Equipment |
| ECT-TTM | 12/KR15 | MIC Notice No. 2004-15 (March 18, 2004) | Technical Requirements for Telecommunications Terminal Equipment |
| ECT-TTM | 12/KR15a | RRL Notice No. 2005-96 (October 26, 2005) | Technical Requirements for Telecommunications Terminal Equipment |
| ECT-TTM | 12/KR41 | MIC Notice No. 2003-41 (September 2, 2003) | Technical Requirements for CATV Equipment |
| ECT-TTM | 12/RRA0810 | RRA Notice 2008-10, K only (Dec. 23, 2008) | Conformity Assessment Procedure for Type Approval of Telecommunications Terminal Equipment |
| ECT-TTM | 12/RRA0859 | RRA Notice 2008-59, K only (Dec. 17, 2008) | Technical Requirements for Telecommunications Terminal Equipment |
| ECT-TTM | 12/RRA0860 | RRA Notice 2008-60, K only (Dec. 17, 2008) | Technical Requirements for grounding equipment, customer premise telecom equipment, line equipment and common ducts, etc. |
| ECT-TTM | 12/S031 | AS/ACIF S031 (2001) | Requirements for ISDN Basic Access Interface |
| ECT-TTM | 12/S038 | AS/ACIF S038 (2001) | Requirements for ISDN Primary Rate Access Interface |
| ECT-TTM | 12/S040 | AS/ACIF S040 (2001) | Requirements for Customer Equipment for use with the Standard Telephone Service - Features for special needs of persons with disabilities |
| ECT-TTM | 12/S041a | AS / ACIF SO41(2005); except 5.3 | Requirements for DSL Customer Equipment for connection to the Public Switched Telephone Network |
| ECT-TTM | 12/S043a | AS/ACIF S043.1 (2001) | Requirements for Customer Equipment for connection to a metallic local loop interface of a Telecommunications Network - Part 1: General |
| ECT-TTM | 12/S043b | AS/ACIF S043.2 (2001) | Requirements for Customer Equipment for connection to a metallic local loop interface of a Telecommunications Network - Part 2: Broadband |
| ECT-TTM | 12/S043c | AS/ACIF S043.3 (2003) | Requirements for Customer Equipment for connection to a metallic local loop interface of a Telecommunications Network - Part 3: DC, low frequency AC and voiceband |
| ECT-TTM | 12/S043d | AS/ACIF S043.1 (2003) | Requirements for Customer Equipment for connection to a metallic local loop interface of a Telecommunications Network - Part 1: General |
| ECT-TTM | 12/S043e | AS/ACIF S043.2 (2005) | Requirements for Customer Equipment for connection to a metallic local loop interface of a Telecommunications Network - Part 2: Broadband |
| ECT-TTM | 12/S043f | AS / ACIF S043.2 (2006) | Requirements for Customer Equipment for connection to a metallic local loop interface of a Telecommunications Network - Part 2: Broadband |
| ECT-TTM | 12/S043g | AS / ACIF S043.2 (2008) | Requirements for Customer Equipment for connection to a metallic local loop interface of a Telecommunications Network - Part 2: Broadband |
| ECT-TTM | 12/S043h | AS / ACIF S043.3 (2008) | Requirements for Customer Equipment for connection to a metallic local loop interface of a Telecommunications Network - Part 3: DC, low frequency AC and voiceband |
| ECT-TTM | 12/T01 | Terminal Equipment Network Protection Standards, FCC/ACTA Method - 47 CFR Part 68 - Analog and Digital | |
| ECT-TTM | 12/T01a | 68.302 (Par. c,d,e,f) Environmental simulation; 68.304 Leakage current limit.; 68.306 Hazardous voltage limit.; 68.308 Signal power limit.; 68.310 Longitudinal balance limit.; 68.312 On-hook impedance limit.; 68.314 Billing protection | |
| ECT-TTM | 12/T01b | 68.316 and 68.317 Hearing Aid Compatibility: technical standards | |
| ECT-TTM | 12/T01c | 68.302 Environmental simulation (Par. a,b) | |
| ECT-TTM | 12/T01d | 68.318 Consumer protection requirements | |
| ECT-TTM | 12/T1TRQ6 | T1.TRQ.6 (2001) | Technical Requirements for SHDSL, HDSL2, HDSL4, Digital Subscriber Line Terminal Equipment to Prevent Harm to the Telephone Network |
| ECT-TTM | 12/T42 | AS/ACIF S002 (2001) + Amendment 1 | Analogue Interworking and Non-Interference Requirements for Customer Equipment Connected to the Public Switched Telephone Network |
| ECT-TTM | 12/T42a | AS/ACIF S002:2005 | Analogue Interworking and Non-Interference Requirements for Customer Equipment Connected to the Public Switched Telephone Network |
| ECT-TTM | 12/T43 | AS/ACIF S003:2001 | Customer Switching Systems Connected to the Public Switched Telephone Network |
| ECT-TTM | 12/T43a | AS/ACIF S003:2005 | Customer Switching Systems Connected to the Public Switched Telephone Network |
| ECT-TTM | 12/T43b | AS/ACIF S003:2006 | Customer Switching Systems Connected to the Public Switched Telephone Network |
| ECT-TTM | 12/T44 | AS/ACIF S004 (2004) | Voice Frequency Performance Requirements for Customer Equipment |
| ECT-TTM | 12/T44a | AS/ACIF S004:2006 | Voice Frequency Performance Requirements for Customer Equipment |
| ECT-TTM | 12/T45 | AS/ACIF S006 (2001) | Requirements for Customer Equipment, operating in the voiceband, for connection to the non-switched Telecommunications Network |
| ECT-TTM | 12/T46 | AS/ACIF S008 (2001) | Requirements for Authorised Cabling Products |
| ECT-TTM | 12/T46a | AS/ACIF S008:2006 | Requirements for Authorised Cabling Products |
| ECT-TTM | 12/T47 | ACA TS-013 | General Requirements for Customer Equipment Connected to ISDN Basic Access |
| ECT-TTM | 12/T48 | ACA TS-014 | General Requirements for Customer Equipment Connected to ISDN Primary Rate Access |
| ECT-TTM | 12/T49 | AS/ACIF S016 (2001) | Requirements for Customer Equipment for connection to hierarchical digital interfaces |
| ECT-TTM | 12/T52 | AS/ACIF S042.1:2006 | Requirements for connection to an air interface of a Telecommunication Network - Part 1: General |
| ECT-TTM | 12/T53 | AS/ACIF S042.3:2005 | Requirements for connection to an air interface of a Telecommunications Network - Part 3: GSM Customer Equipment |
| ECT-TTM | 12/T603B | ANSI/TIA/EIA-603-C (2004) | TIA Standard: Land Mobile FM or PM Communications Equipment - Measurement and Performance Standard |
| ECT-TTM | 12/TBR12 | ETSI TBR 12 (December 1993) + A1 (January 1996) | Business TeleCommunications (BTC); Open Network Provision (ONP) technical requirements; 2,048 kbit/s digital unstructured leased line (D2048U); Attachment requirements for terminal equipment interface |
| ECT-TTM | 12/TBR13 | ETSI TBR 013 (January 1996) | Business TeleCommunications (BTC); 2,048 kbits/s digital structured leased lines (D2048S); Attachment requirements for terminal equipment interface |
| ECT-TTM | 12/TBR21 | ETSI TBR 21 (January 1998) | Terminal Equipment; Attachment requirements for pan-European approval for connection to the analogue PSTNs of TE (excluding TE supporting the voice telephony service) in which network addressing, if provided, is by means of DTMF signalling |
| ECT-TTM | 12/TBR38 | ETSI TBR 38 (May 1998) | Public Switched Telephone Network; Attachment requirements for a terminal equipment incorporating an analogue handset function capable of supporting the justified case service when connected to the analogue interface of the PSTN in Europe |
| ECT-TTM | 12/TIA1096 | ANSI/TIA-1096 (2006-08) | Telephone Terminal Equipment Connector Requirements for Connection of Terminal Equipment to the Telephone Network |
| ECT-TTM | 12/TIA31B | TIA/EIA TSB-31-B (1998) | Part 68 Rational and Measurement Guidelines |
| ECT-TTM | 12/TIA382 | TIA/EIA-382-A (2000) | Minimum Standards: Citizen Band Radio Service Amplitude Modulated (AM) Transceivers Operating in the 27 MHz Band (ANSI/TIA/EIA-382-A-1989 (R2000)) |
| ECT-TTM | 12/TIA968 | ANSI/TIA-968-A (2003) | Telephone Terminal Equipment, Technical Requirements for Connection of Terminal Equipment to the Telephone Network |
| ECT-TTM | 12/TIA968a | ANSI/TIA-968-A-1 (2003) | Telephone Terminal Equipment, Technical Requirements for Connection of Terminal Equipment to the Telephone Network - Addendum 1 |
| ECT-TTM | 12/TIA968b | ANSI/TIA-968-A-2 (2004) | Telephone Terminal Equipment, Technical Requirements for Connection of Terminal Equipment to the Telephone Network - Addendum 2 |
| ECT-TTM | 12/TIA968c | ANSI/TIA-968-A-3 (2005) | Telephone Terminal Equipment, Technical Requirements for Connection of Terminal Equipment to the Telephone Network - Addendum 3 |
| ECT-TTM | 12/TIA968d | ANSI/TIA-968-A-4 (2006-11) | Telephone Terminal Equipment, Technical Requirements for Connection of Terminal Equipment to the Telephone Network - Addendum 4 |
| ECT-TTM | 12/TIA968e | ANSI/TIA-968-A-5 (2007-07) | Telephone Terminal Equipment, Technical Requirements for Connection of Terminal Equipment to the Telephone Network - Addendum 5 |
| MIL-STD | 12/1399a | MIL-STD1399 Section 070 | Interface standard for shipboard systems, Section 070 - Part 1- DC Magnetic Field Environment |
| MIL-STD | 12/C03 | MIL-STD-462 Version C Method CE03 | |
| MIL-STD | 12/C06 | MIL-STD-462 Version C Method CE06 | |
| MIL-STD | 12/C07 | MIL-STD-462 Version C Method CE07 | |
| MIL-STD | 12/C10 | MIL-STD-462 Version C Method CS01 | |
| MIL-STD | 12/C11 | MIL-STD-462 Version C Method CS02 | |
| MIL-STD | 12/C12 | MIL-STD-462 Version C Method CS03 | |
| MIL-STD | 12/C13 | MIL-STD-462 Version C Method CS04 | |
| MIL-STD | 12/C14 | MIL-STD-462 Version C Method CS05 | |
| MIL-STD | 12/C15 | MIL-STD-462 Version C Method CS06 | |
| MIL-STD | 12/C16 | MIL-STD-462 Version C Method CS09 | |
| MIL-STD | 12/C17 | MIL-STD-462 Version C Method CS10 | |
| MIL-STD | 12/C18 | MIL-STD-462 Version C Method CS11 | |
| MIL-STD | 12/C21 | MIL-STD-462 Version C Method CS14 | |
| MIL-STD | 12/RE01 | MIL-STD-462 Version C Method RE01 | |
| MIL-STD | 12/RE02 | MIL-STD-462 Version C Method RE02 | |
| MIL-STD | 12/RE03 | MIL-STD-462 Version C Method RE03 | |
| MIL-STD | 12/RS01 | MIL-STD-462 Version C Method RS01 | |
| MIL-STD | 12/RS02 | MIL-STD-462 Version C Method RS02 | |
| MIL-STD | 12/RS03 | MIL-STD-462 Version C Method RS03 | |
| MIL-STD | 12/C01 | MIL-STD-462 Version C Method CE01 | |
| MIL-STD | 12/MS167 | MIL-STD-167 rev. 74 (June 19, 1987) | |
| MIL-STD | 12/MS202 | MIL-STD-202 rev. G (July 18, 2003) | Sections 103B, 107G, 201A, 213B, and 214A |
| MIL-STD | 12/MS740 | MIL-STD-740-1 | Airborne Sound Measurements and Acceptance Criteria of Shipboard Equipment |
| MIL-STD | 12/MS810f | MIL-STD-810 ver. F | Methods: 501.4, 502.4, 503.4, 505.4, 506.4, 507.4, 514.5, 515.5, and 516.5 |
| MIL-STD | 12/A01 | MIL-STD-462 Method CE01 | |
| MIL-STD | 12/A04 | MIL-STD-462 Method CE02 | |
| MIL-STD | 12/A06 | MIL-STD-462 Method CE03 | |
| MIL-STD | 12/A08 | MIL-STD-462 Method CE04 | |
| MIL-STD | 12/A10 | MIL-STD-462 Method CE06 | |
| MIL-STD | 12/A12 | MIL-STD-462 Method CE07 | |
| MIL-STD | 12/A13 | MIL-STD-462 Version D Method CE101 | |
| MIL-STD | 12/A14 | MIL-STD-462 Version D Method CE102 | |
| MIL-STD | 12/A15 | MIL-STD-462 Version D Method CE106 | |
| MIL-STD | 12/A16 | MIL-STD-461 Version E Method CE101 | |
| MIL-STD | 12/A17 | MIL-STD-461 Version E Method CE102 | |
| MIL-STD | 12/A18 | MIL-STD-461 Version E Method CE106 | |
| MIL-STD | 12/A19 | MIL-STD-461 Version F Method CE101 | |
| MIL-STD | 12/A20 | MIL-STD-461 Version F Method CE102 | |
| MIL-STD | 12/A21 | MIL-STD-461 Version F Method CE106 | |
| MIL-STD | 12/B01 | MIL-STD-462 Method CS01 | |
| MIL-STD | 12/B02 | MIL-STD-462 Method CS02 | |
| MIL-STD | 12/B04 | MIL-STD-462 Method CS03/CS04/CS05/CS08 | |
| MIL-STD | 12/B05 | MIL-STD-462 Method CS06 | |
| MIL-STD | 12/B06 | MIL-STD-462 Method CS07 | |
| MIL-STD | 12/B07 | MIL-STD-462 Method CS09 | |
| MIL-STD | 12/B08 | MIL-STD-462 Method CS10 | |
| MIL-STD | 12/B09 | MIL-STD-462 Method CS11 | |
| MIL-STD | 12/B10 | MIL-STD-462 Method CS12 | |
| MIL-STD | 12/B11 | MIL-STD-462 Method CS13 | |
| MIL-STD | 12/B12 | MIL-STD-462 Version D Method CS101 | |
| MIL-STD | 12/B13 | MIL-STD-462 Version D Method CS103 | |
| MIL-STD | 12/B14 | MIL-STD-462 Version D Method CS104 | |
| MIL-STD | 12/B15 | MIL-STD-462 Version D Method CS105 | |
| MIL-STD | 12/B16 | MIL-STD-462 Version D Method CS109 | |
| MIL-STD | 12/B17 | MIL-STD-462 Version D Method CS114 | |
| MIL-STD | 12/B18 | MIL-STD-462 Version D Method CS115 | |
| MIL-STD | 12/B19 | MIL-STD-462 Version D Method CS116 | |
| MIL-STD | 12/B20 | MIL-STD-461 Version E Method CS101 | |
| MIL-STD | 12/B21 | MIL-STD-461 Version E Method CS103 | |
| MIL-STD | 12/B22 | MIL-STD-461 Version E Method CS104 | |
| MIL-STD | 12/B23 | MIL-STD-461 Version E Method CS105 | |
| MIL-STD | 12/B24 | MIL-STD-461 Version E Method CS109 | |
| MIL-STD | 12/B25 | MIL-STD-461 Version E Method CS114 | |
| MIL-STD | 12/B26 | MIL-STD-461 Version E Method CS115 | |
| MIL-STD | 12/B27 | MIL-STD-461 Version E Method CS116 | |
| MIL-STD | 12/B28 | MIL-STD-461 Version F Method CS101 | |
| MIL-STD | 12/B29 | MIL-STD-461 Version F Method CS103 | |
| MIL-STD | 12/B30 | MIL-STD-461 Version F Method CS104 | |
| MIL-STD | 12/B31 | MIL-STD-461 Version F Method CS105 | |
| MIL-STD | 12/B32 | MIL-STD-461 Version F Method CS106 | |
| MIL-STD | 12/B33 | MIL-STD-461 Version F Method CS109 | |
| MIL-STD | 12/B34 | MIL-STD-461 Version F Method CS114 | |
| MIL-STD | 12/B35 | MIL-STD-461 Version F Method CS115 | |
| MIL-STD | 12/B36 | MIL-STD-461 Version F Method CS116 | |
| MIL-STD | 12/D01 | MIL-STD-462 Method RE01 | |
| MIL-STD | 12/D02 | MIL-STD-462 Method RE02 | |
| MIL-STD | 12/D03 | MIL-STD-462 Method RE03 | |
| MIL-STD | 12/D04 | MIL-STD-462 Version D Method RE101 | |
| MIL-STD | 12/D05 | MIL-STD-462 Version D Method RE102 | |
| MIL-STD | 12/D06 | MIL-STD-462 Version D Method RE103 | |
| MIL-STD | 12/D07 | MIL-STD-461 Version E Method RE101 | |
| MIL-STD | 12/D08 | MIL-STD-461 Version E Method RE102 | |
| MIL-STD | 12/D09 | MIL-STD-461 Version E Method RE103 | |
| MIL-STD | 12/D10 | MIL-STD-461 Version F Method RE101 | |
| MIL-STD | 12/D11 | MIL-STD-461 Version F Method RE102 | |
| MIL-STD | 12/D12 | MIL-STD-461 Version F Method RE103 | |
| MIL-STD | 12/E01 | MIL-STD-462 Method RS01 | |
| MIL-STD | 12/E02 | MIL-STD-462 Method RS02 | |
| MIL-STD | 12/E03 | MIL-STD-462 Method RS03 (Consult laboratory for field strengths available) | |
| MIL-STD | 12/E04 | MIL-STD-462 Method RS03 employing RADHAZ procedures for high level testing (Consult laboratory for field strengths available) | |
| MIL-STD | 12/E05 | MIL-STD-462 Method RS05 | |
| MIL-STD | 12/E07 | MIL-STD-462 Method RS06 | |
| MIL-STD | 12/E08 | MIL-STD-462 Version D Method RS101 | |
| MIL-STD | 12/E09 | MIL-STD-462 Version D Method RS103 | |
| MIL-STD | 12/E10 | MIL-STD-462 Version D Method RS105 | |
| MIL-STD | 12/E11 | MIL-STD-461 Version E Method RS101 | |
| MIL-STD | 12/E12 | MIL-STD-461 Version E Method RS103 | |
| MIL-STD | 12/E13 | MIL-STD-461 Version E Method RS105 | |
| MIL-STD | 12/E14 | MIL-STD-461 Version F Method RS01 | |
| MIL-STD | 12/E15 | MIL-STD-461 Version F Method RS101 | |
| MIL-STD | 12/E16 | MIL-STD-461 Version F Method RS103 | |
| MIL-STD | 12/E17 | MIL-STD-461 Version F Method RS105 | |
| File Type | application/vnd.ms-office |
| Last Modified By | dyonder |
| File Modified | 2009-11-13 |
| File Created | 2007-05-22 |