Form 8038-TC - Information Return for Tax Credit Bonds

Form 8038-TC - Information Return for Tax Credit Bonds

Instructions for Form 8038-TC

Form 8038-TC - Information Return for Tax Credit Bonds

OMB: 1545-2160

Document [pdf]
Download: pdf | pdf
Userid: SD_HJDCB

PAGER/SGML
Page 1 of 4

Fileid:

DTD INSTR04

Leadpct: 0%

Pt. size: 9

...sers\hjdcb\documents\work products\8038-TC\instructions\101609.sgm

Instructions for Form 8038-TC

❏

Draft

❏

Ok to Print

(Init. & date)

17:23 - 16-OCT-2009

The type and rule above prints on all proofs including departmental reproduction proofs. MUST be removed before printing.

Instructions for Form
8038-TC

Department of the Treasury
Internal Revenue Service

(Rev. January 2010)
Information Return for Tax Credit Bonds

General Instructions

indicate whether the bond issue in
question is under examination by the IRS.
Do not submit copies of the trust
indenture or other bond documents.

What’s New

Where To File

The American Recovery and
Reinvestment Act of 2009 added
Qualified School Construction Bonds as
well as Qualified Energy Conservation
Bonds and consolidated those bonds
together with Qualified Forestry
Conservation Bonds, Qualified Zone
Academy Bonds and New Clean
Renewable Energy Bonds under section
54A.

File Form 8038-TC and any attachments,
with Department of the Treasury, Internal
Revenue Service Center, Ogden, UT
84201-0020.

Section references are to the Internal
Revenue Code unless otherwise noted.

Purpose of Form
Form 8038-TC is used by the issuers of
the qualified tax credit bonds listed below
under Who Must File, to provide the IRS
with the information required by section
149(e).

Who Must File
Issuers of the following bonds must file a
separate Form 8038-TC for each qualified
tax credit bond issued after January 1,
2010.
• Qualified Forestry Conservation Bonds
.
• Qualified Zone Academy Bonds
• Qualified School Construction Bonds
• Clean Renewable Energy Bonds
• New Clean Renewable Energy Bonds
• Qualified Energy Conservation Bonds
• Midwestern Tax Credit Bonds
• All other qualified tax credit bonds
(except Build America Bonds which
should be reported on Form 8038-B,
Information Return for Build America
Bonds and Recovery Zone Economic
Development Bonds.)

When To File
File Form 8038-TC on or before the 15th
day of the 2nd calendar month after the
close of the calendar quarter in which the
bond was issued. Form 8038-TC may not
be filed before the issue date and must be
completed based on the facts as of the
issue date.
Late Filing An issuer may be granted an
extension of time to file Form 8038-TC
under section 3 of Rev. Proc. 2002-48,
2002-37 I.R.B. 531, if it is determined that
the failure to file timely is not due to willful
neglect. Type or print at the top of the
form, “Request for Relief under section 3
of Rev. Proc. 2002-48.” Attach to the
Form 8038-TC a letter explaining why
Form 8038-TC was not filed on time. Also

Other Forms That May Be
Required
For submitting payment of arbitrage
rebate to the Federal Government use
Form 8038-T, Arbitrage Rebate, Yield
Reduction and Penalty in Lieu of
Arbitrage Rebate. For reporting Build
America Bonds, both Tax Credit and
Direct Pay, including Recovery Zone
Economic Development Bonds, use Form
8038-B.

Rounding to Whole Dollars
You may show amounts on this return as
whole dollars. To do so, drop amounts
less than 50 cents and increase amounts
from 50 cents through 99 cents to the
next higher dollar.

Definitions
Qualified Tax Credit Bond. An
obligation issued under sections 54, 54A
or 1400N(l) that entitles the taxpayer
holding such bond on one or more credit
allowance dates occurring during any
taxable year to a credit against the federal
income tax imposed for that taxable year.
Qualified Forestry Conservation Bond
An obligation that is part of an issue 100
percent of the available project proceeds
of which are to be used to finance one or
more qualified forestry conservation
purposes as defined in section 54B.
Qualified Zone Academy Bond. An
obligation that is part of an issue 100
percent of the available project proceeds
of which are to be used for a qualified
purpose with respect to a qualified zone
academy established by an eligible local
education agency as provided in section
54E.
Qualified School Construction Bond.
An obligation that is part of an issue 100
percent of the available project proceeds
of which are to be used for the
construction, rehabilitation, or repair of a
public school facility or for the acquisition
of land on which such a facility is to be
constructed with the proceeds as set forth
in section 54F.
Cat. No. 54164P

Clean Renewable Energy Bond An
obligation that is part of an issue 95
percent or more of the proceeds of which
are to be used for capital expenditures
incurred by qualified borrowers for one or
more eligible clean renewable energy
projects as defined in section 54.
New Clean Renewable Energy Bond.
An obligation that is part of an issue 100
percent of the available project proceeds
of which are to be used for capital
expenditures incurred by governmental
bodies, public power providers, or
cooperative electric companies for one
more qualified renewable energy facilities
as defined in section 54C.
Qualified Energy Conservation Bond.
An obligation that is part of an issue 100
percent of the available project proceeds
of which are to be used for one or more
qualified energy conservation purposes
as defined in section 54D.
Midwestern Tax Credit Bond. An
obligation that is part of an issue of bonds
issued in connection with Midwestern
disaster areas in any state in which a
Midwestern disaster area is located. See
section 1400N(l) for more information
about these requirements.
Issue. Generally, bonds are treated as
part of the same issue if they are issued
by the same issuer, on the same date,
and in a single transaction, or series of
related transactions.
Issue price. The issue price of
obligations is generally determined under
Regulations section 1.148-1(b). Thus,
when issued for cash, the issue price is
the price at which a substantial amount of
the obligations are sold to the public. To
determine the issue price of an obligation
issued for property, see sections 1273
and 1274 and the related income tax
regulations.
Sale proceeds. Sale proceeds are
determined under Regulations section
1.148-1(b) as any amount actually or
constructively received from the sale of
the issue, including amounts used to pay
underwriters1 discount or compensation
and accrued interest, other than
pre-issuance accrued interest. Sale
proceeds also include, but are not limited
to, amounts derived from the sale of a
right that is associated with a bond, and
that is described in section 1.148-4(b)(4).
Sale proceeds shall also include the
proceeds from the sale of credit strips.
See also section 1.148-4(h)(5) treating

Page 2 of 4

Instructions for Form 8038-TC

17:23 - 16-OCT-2009

The type and rule above prints on all proofs including departmental reproduction proofs. MUST be removed before printing.

amounts received upon the termination of
certain hedges as sale proceeds.
Arbitrage. The issuer must comply with
the arbitrage requirements of sections
148 and 54A.

Specific Instructions
Part I—Reporting Authority
Amended return. An issuer may file an
amended return to change or add to the
information reported on a previously filed
return for the same date of issue. If you
are filing to correct errors or change a
previously filed return, check the
“Amended Return” box in the heading of
the form.
The amended return must provide all
the information reported on the original
return, in addition to the new or corrected
information. Attach an explanation of the
reason for the amended return and write
across the top, “Amended Return
Explanation.”
Line 1. Enter the name of the entity
issuing the bonds, not the name of the
entity receiving the benefit of the
financing.
Line 2. An issuer that does not have an
employer identification number (EIN)
should apply for one on Form SS-4,
Application for Employer Identification
Number. You can get this form on the IRS
website at www.irs.gov or by calling
1-800-TAX-FORM (1-800-829-3676). You
may receive an EIN by telephone by
following the instructions for Form SS-4.
Line 4. After the preprinted 1, enter two
self-designated digits. If filing multiple
Form 8038-TC1s for separate bond issues
during the calendar year, number reports
consecutively in the order of issue date
(for example, 134, 135, etc.). If the return
is amending a previously filed Form
8038-TC, use the same report number
that was used on the original filing.
Line 7. The date of issue is generally the
date on which the issuer exchanges the
bonds for the underwriter1s (or other
purchaser1s) funds.
Line 8. If there is no name of the issue,
please provide other identification of the
issue.
Line 9. Enter the CUSIP (Committee on
Uniform Securities Identification
Procedures) number of each bond. If
some or all of the tax credits are stripped,
attach a schedule with the name of each
purchaser of the tax credit bonds or tax
credit strips, each purchaser1s EIN and
the CUSIP numbers associated with the
bonds and the stripped tax credits. If the
issue does not have a CUSIP number,
write, “None.” If the issue either has no
CUSIP number or is privately placed,
attach a schedule with each purchaser1s
EIN, name and address.

• 101 - Qualified Forestry Conservation
Bonds
• 102 - Qualified Zone Academy Bonds
• 103 - Qualified School Construction
Bonds
• 104 - Clean Renewable Energy Bonds
• 105 - New Clean Renewable Energy
Bonds
• 106 - Qualified Energy Conservation
Bonds
• 107 - Midwestern Tax Credit Bonds
• “Other”
Line 2. Enter title of bond.

Part III—Description of
Obligations
Line 1. See Issue price under Definitions
on page 1.
Line 2. The stated redemption price at
maturity of the entire issue is the sum of
the stated redemption prices at maturity
of each bond issued as part of the issue.
Line 3. Enter the last date on which any
of the bonds will mature. If more than one
maturity, attach a schedule for each
principal payment date.
Line 4. The applicable credit rate is the
daily rate set by the Secretary under
section 54A(b)(3) determined as of the
first day on which there is a binding,
written contract for the sale or exchange
of the bond. Such rate is posted by the
Bureau of Public Debt on its internet site
for State and Local Government Series
securities at http://www.treasurydirect.
gov. See Notice 2009-15.
Line 5. Enter the maximum term set by
the Secretary under section 54A(d)(5)
applicable during each calendar month in
which the tax credit bonds are sold. The
maximum term is posted by the Bureau of
Public Debt on its internet site for State
and Local Government Series securities
at http://www.treasurydirect.gov.
Line 6. Enter the applicable maximum
permitted yield for the sinking fund
expected to be used to repay the issue
under section 54A(d)(4)(C). The permitted
sinking fund yield is set by the Secretary
consistent with the maximum term
determined under section 54A(d)(5) and
is posted by the Bureau of Public Debt on
its internet site for State and Local
Government Series securities at http://
www.treasurydirect.gov..

Part IV— Proceeds of Issue
Line 1. See Sale proceeds, under
Definitions on page 1.
Note. If the bond is stripped at issuance,
line 1 must include sale proceeds of the
principal and sale proceeds of the credit
strips.

Part II—Type of Issue

Line 2. Enter the amount of the
proceeds that will be used to pay bond
issuance costs, including underwriter1s
fees, fees for trustees and bond counsel.

Line 1. Identify the type of tax credit
bonds issued by entering the
corresponding three digit code as follows:

Note. Bond issuance costs for tax credit
bonds issued under section 54A are
limited to 2 percent of sale proceeds.

-2-

Line 3. Estimate expected investment
proceeds on the sale proceeds of the
issue, including proceeds received by the
issuer from the sale of tax credits that
have been stripped from the bonds.
Line 4. For all tax credit bonds issued
under section 54A expected available
project proceeds shall be calculated by
subtracting line 2 from line 1 and adding
line 3. For Midwestern Tax Credit Bonds
(Code 107) and for Clean Renewable
Energy Bonds (Code 104) read line 4
substituting “proceeds” for “available
project proceeds” add lines 1 and 3 and
enter that amount on line 4.
Note. Do not subtract line 2, bond
issuance cost.
Line 5. For Midwestern Tax Credit
Bonds, insert the amount of state pledged
matching funds.
Line 6. Enter any amount of proceeds
not otherwise itemized in lines 1-5 and
describe the purpose for which the
proceeds are to be used.
Line 7. Total proceeds equal the sum of
lines 4 through 6.
Note. For Midwestern Tax Credit Bonds
matching pledged funds are included in
Total Proceeds for the purpose of
determining the percentage of proceeds
to be used for qualified purpose
expenditures. Thus, for Midwestern Tax
Credit Bonds matching pledged funds as
well as bond proceeds must be
accounted for in Part V. For Qualified Tax
Credit Bonds issued under section 54A,
lines 4 and 7, available project proceeds
and total proceeds respectively, should
equal the same amount.

Part V— Description of Use of
Proceeds for Qualified Purpose
Expenditures
Lines 1 through 13. Enter the dollar
amount of proceeds allocated to each
qualified purpose expenditure on the
corresponding line.
Line 14. Enter total qualified purpose
expenditures equal to the sum of amounts
entered in lines 1 through line 13.
Line 15. To determine the percentage of
total proceeds to be used for qualified
purpose expenditures, divide line 14 in
Part V. by line 7 in Part IV. Then multiply
the result by 100.
Line 16. Determine the proceeds of the
issue used to reimburse the issuer for
amounts paid for a qualified purpose prior
to the issuance of the bonds. See
Regulations section 1.150-2.
Line 17. Subject to certain exceptions
under Regulations section 1.150-2(f), an
issuer must adopt an official intent, as
described in Regulations section
1.150-2(e), to reimburse itself for
preissuance expenditures within 60 days
after payment of the original expenditure.
Enter the date the official intent was
adopted.

Page 3 of 4

Instructions for Form 8038-TC

17:23 - 16-OCT-2009

The type and rule above prints on all proofs including departmental reproduction proofs. MUST be removed before printing.

Part VI— Allocation of National,
State, Tribal, or Local Bond
Limitation Amount
Line 1a. Enter the amount of volume cap
allocated to the issue by bond type.
Attach a copy of the national (for
example, from the Department of the
Treasury or IRS), state, tribal, or local
allocations with respect to the issue.
Check the tribal box if the allocation is
provided by the Department of Interior.
Failure to attach the appropriate
allocation certification will result in a delay
in processing the report. The appropriate
officials must certify that the issue has
been designated as one or more types of
qualified tax credit bonds. In the space in
the Part VI. box, enter the year in which
the allocation was received and if the
allocation is a carryforward of unused
volume cap, write “carryforward.”
Lines 1b through 1d. Check the
corresponding box indicating whether the
allocation is national, state, or tribal. If the
allocation is local, write “local” in the box.
Line 2. If the allocation is from a state,
enter the state abbreviation.

Part VII— Miscellaneous
Line 1a. Check the box if there is a
reserve fund described in section
54A(d)(4)(C) (sinking fund) that is
expected to repay the issue at maturity.
Line 1b. A reserve may be funded in
unequal periodic installments so long as it
is funded no sooner than in equal periodic
installments. Check the box if the reserve
fund is funded no sooner than in equal
periodic payments.
Line 1c. Check the box if the reserve
fund is expected to result in an amount
greater than the amount necessary to
repay the issue and the yield on the
reserve fund is not greater than the
permitted sinking fund yield (Part III., line
6).
Line 1d. For purposes of monitoring the
arbitrage requirements of section 148,
such monitoring shall include the
arbitrage requirements of section 54A. If
the issuer has established such
procedures, check the box.
Line 2. The issuer must certify that
applicable state and local law
requirements governing conflicts of
interest are satisfied with respect to the
bond issue. See section 54A(d)(6). If
these requirements are met, check the
box in line 2.
Line 3. If some or all of the tax credits
are stripped, check the box.
Note. Submit the information required
under Part I., line 9.
Line 4. If an issuer fails to spend 100
percent of the available project proceeds
of the issue by the close of the 3-year
expenditure period (including any
extensions granted), the issuer must
redeem all of the nonqualified bonds
within 90 days after the end of such
expenditure period. See 54A(d)(2)(B). If

the issuer has established procedures to
meet this requirement, check the box.
Line 5. “Other” is reserved for future tax
credit bonds.

Part VIII—Consent to
Disclosure of Certain
Information From This Return
Line 1. If the issuer consents to the
IRS’s publication, through a website or
other publication, of its name and
address, name and description of bond
issue, date of issuance, CUSIP numbers,
final maturity date, stated redemption
price at maturity, applicable credit rate
and maximum term to assist in the proper
reporting of interest, tax credits, or other
benefits under section 6049, check the
box next to “Yes”.

Signature
An authorized representative of the issuer
must sign Form 8038-TC and any
applicable certification. Also print the
name and title of the person signing Form
8038-TC.

Schedule A. Qualified
Zone Academy Bonds
under section 54A and 54E
Part I— Academy Information
Line 1. If the school is located in a
designated empowerment zone, check
the box.
Line 2. If the school is located in a
designated enterprise community, check
the box.
Line 4. If for any calendar year the
allocation for a state exceeds the amount
of bonds issued for such year, the
limitation may be carried over but only to
the first 2 years following the unused
limitation year. Limitation amounts are
treated on a first-in, first-out basis. If the
bonds or any portion of the bonds are
issued under a carryover limitation, check
the box.

Part II— Description of the
Private Business Contribution.
Lines 1 through 4. In order to be a
qualified zone academy bond the issuer
must certify that it has written assurances
that the private business contributions
have a present value of not less than 10
percent of the proceeds of the issue. A
qualified business contribution is
equipment, technical assistance, and
services of employees as volunteers,
internships, field trips, or other
opportunities outside the academy.
Additionally, the private business
contribution may be met by any other
property or service specified by the
eligible local education agency. List the
dollar amount of each private contribution
on the corresponding line.
Line 5. For items not listed in lines 1
through 4, enter the amount contributed
on line 5 and provide a description of
such contribution.

-3-

Part III— Other Information
Line 1. Enter the name of the donor of
the private business contribution.
Line 2. Enter the donor1s EIN. (If
multiple donors, attach a schedule.)
Line 3. Enter the name of the eligible
local educational agency.

Schedule B. Qualified
School Construction
Bonds under IRC section
54A and 54F
Part I— Use of Allocation
Line 1. A large local educational agency
means, with respect to a calendar year, a
large local educational agency selected
by the Secretary of Education to receive
allocations of volume cap for Qualified
School Constructions Bonds. For
Qualified School Construction Bond
allocations to large local educational
agencies for 2009 see Notice 2009-35. If
the proceeds are to be used by a large
local educational agency, check “Yes”.
Line 2. Indian schools received separate
allocations of $200,000,000 for calendar
years 2009 and $200,000,000 for
calendar year 2010 to be allocated by the
Secretary of the Interior for purposes of
construction, rehabilitation, and repair of
schools funded by the Bureau of Indian
Affairs. With respect to the amounts
allocated, Indian tribal governments (as
defined in section 7701(a)(40)) are
qualified issuers. See section 54F(d)(4). If
the proceeds are to be used by a school
receiving such an allocation, check “Yes”.
Line 3. If for any calendar year, the
amount allocated to the state or to the
Indian schools exceeds the amount of
bonds issued during such year, the
excess limitation may be carried over to
the succeeding year until used. See
section 54F(e). If a carryover of unused
allocation is used, check “Yes”.
Line 5. A Qualified School Construction
Bond must be designated as such by the
issuing state or local government within
the jurisdiction that the school is located.
See section 54F(a). If these bonds have
been so designated check “Yes”.

Part II— Use of Qualified
School Construction Bonds
Proceeds
Lines 1 through 4. Enter the amount of
proceeds expected to be used for each
corresponding type of expenditures.
Line 5. For an expenditure not listed in
lines 1 through 4, list in line 5 and provide
a description of such expenditure.

Part III— Other Information
Line 1. Under 54F(a)(2), the eligible
costs of a public schools facility financed
with the proceeds of an issue of QSCBs
must relate to a public school that is
located within the jurisdiction of the issuer
of the QSCBs. If the issuer is not the local

Page 4 of 4

Instructions for Form 8038-TC

17:23 - 16-OCT-2009

The type and rule above prints on all proofs including departmental reproduction proofs. MUST be removed before printing.

education agency, enter the name of the
local education agency in which the public
school facility is located. (If the issuer is
issuing bonds for more than one public
school facility, attach a schedule of each
public school facility and each local
education agency in which the public
school facility is located.)
Privacy Act and Paperwork Reduction
Act Notice. We ask for the information
on this form to carry out the Internal
Revenue laws of the United States. You
are required to give us the information.
We need it to ensure that you are
complying with these laws. Section 6109
requires paid preparers to provide their
identifying number.
You are not required to provide the
information requested on a form that is

subject to the Paperwork Reduction Act
unless the form displays a valid OMB
control number. Books or records relating
to a form or its instructions must be
retained as long as their contents may
become material in the administration of
any Internal Revenue law. Generally, tax
returns and return information are
confidential, as required by section 6103.
The time needed to complete and file
this form will vary depending on individual
circumstances. The estimated average
time is:
Recordkeeping . . . . . . . . .
Learning about the law or the
form . . . . . . . . . . . . . . . . .
Preparing, copying,
assembling, and sending the
form to the IRS . . . . . . . . . .

-4-

x hr., xx min.
xx min.
xx min.

If you have comments concerning the
accuracy of these time estimates or
suggestions for making this form simpler,
we would be happy to hear from you. You
can write to the Internal Revenue Service,
Tax Products Coordinating Committee,
SE:W:CAR:MP:T:T:SP, 1111 Constitution
Ave. NW, IR-6526, Washington, DC
20224. Do not send the form to this
address. Instead, see Where To File on
page 1.


File Typeapplication/pdf
File TitleC:\Batch\Users\Pagersvc[DS]\ITESTT\ITEST
File Modified2009-10-16
File Created2009-10-16

© 2024 OMB.report | Privacy Policy