60_Day_FR_Notice

60dayFRN_1218-0233(08-24-10).pdf

Rigging Equipment for Material Handling (29 CFR 1926.251)

60_Day_FR_Notice

OMB: 1218-0233

Document [pdf]
Download: pdf | pdf
Federal Register / Vol. 75, No. 163 / Tuesday, August 24, 2010 / Notices
DEPARTMENT OF LABOR
Occupational Safety and Health
Administration
[Docket No. OSHA–2010–0038]

Rigging Equipment for Material
Handling; Extension of the Office of
Management and Budget’s (OMB)
Approval of Information Collection
(Paperwork) Requirements
Occupational Safety and Health
Administration (OSHA), Labor.
ACTION: Request for public comment.
AGENCY:

OSHA solicits public
comments concerning its proposal to
extend the Office of Management and
Budget’s (OMB) approval of the
information collection requirements
contained in paragraphs (b)(1), (b)(6)(i),
(b)(6)(ii), (c)(15)(ii), (e)(1)(i), (ii), and (iii)
and (f)(2) of the Standard on Rigging
Equipment for Material Handling (29
CFR 1926.251). These paragraphs
require affixing identification tags or
markings on rigging equipment,
developing and maintaining inspection
records, and retaining proof-testing
certificates.

SUMMARY:

Comments must be submitted
(postmarked, sent, or received) by
October 25, 2010.
ADDRESSES:
Electronically: You may submit
comments and attachments
electronically at http://
www.regulations.gov, which is the
Federal eRulemaking Portal. Follow the
instructions online for submitting
comments.
Facsimile: If your comments,
including attachments, are not longer
than 10 pages you may fax them to the
OSHA Docket Office at (202) 693–1648.
Mail, hand delivery, express mail,
messenger, or courier service: When
using this method, you must submit
three copies of your comments and
attachments to the OSHA Docket Office,
OSHA Docket No. OSHA–2010–0038,
U.S. Department of Labor, Occupational
Safety and Health Administration,
Room N–2625, 200 Constitution
Avenue, NW., Washington, DC 20210.
Deliveries (hand, express mail,
messenger, and courier service) are
accepted during the Department of
Labor’s and Docket Office’s normal
business hours, 8:15 a.m. to 4:45 p.m.,
e.t.
Instructions: All submissions must
include the Agency name and OSHA
docket number for the Information
Collection Request (ICR) (OSHA Docket
No. 2010–0038). All comments,
including any personal information you

wwoods2 on DSK1DXX6B1PROD with NOTICES_PART 1

DATES:

VerDate Mar<15>2010

15:00 Aug 23, 2010

Jkt 220001

provide, are placed in the public docket
without change, and may be made
available online at http://
www.regulations.gov. For further
information on submitting comments
see the ‘‘Public Participation’’ heading in
the section of this notice titled
SUPPLEMENTARY INFORMATION.
Docket: To read or download
comments or other material in the
docket, go to http://www.regulations.gov
or the OSHA Docket Office at the
address above. All documents in the
docket (including this Federal Register
notice) are listed in the http://
www.regulations.gov index; however,
some information (e.g., copyrighted
material) is not publicly available to
read or download through the Web site.
All submissions, including copyrighted
material, are available for inspection
and copying at the OSHA Docket Office.
You may also contact Theda Kenney at
the address below to obtain a copy of
the ICR.
FOR FURTHER INFORMATION CONTACT:

Theda Kenney or Todd Owen,
Directorate of Standards and Guidance,
OSHA, U.S. Department of Labor, Room
N–3609, 200 Constitution Avenue, NW.,
Washington, DC 20210; telephone (202)
693–2222.
SUPPLEMENTARY INFORMATION:

I. Background
The Department of Labor, as part of its
continuing effort to reduce paperwork
and respondent (i.e., employer) burden,
conducts a preclearance consultation
program to provide the public with an
opportunity to comment on proposed
and continuing information collection
requirements in accordance with the
Paperwork Reduction Act of 1995
(PRA–95) (44 U.S.C. 3506(c)(2)(A)). This
program ensures that information is in
the desired format, reporting burden
(time and costs) is minimal, collection
instruments are clearly understood, and
OSHA’s estimate of the information
collection burden is accurate. The
Occupational Safety and Health Act of
1970 (the OSH Act) (29 U.S.C. 651 et
seq.) authorizes information collection
by employers as necessary or
appropriate for enforcement of the OSH
Act or for developing information
regarding the causes and prevention of
occupational injuries, illnesses, and
accidents (29 U.S.C. 657). The OSH Act
also requires that OSHA obtain such
information with minimum burden
upon employers, especially those
operating small businesses, and to
reduce to the maximum extent feasible
unnecessary duplication of efforts in
obtaining information (29 U.S.C. 657).

PO 00000

Frm 00059

Fmt 4703

Sfmt 4703

52033

Paragraph (b)(1) requires that alloy
steel chains have permanently affixed
durable identification tags stating size,
grade, rated capacity and sling
manufacturer. Paragraph (b)(6)(i)
requires the employer to make a
thorough periodic inspection of alloy
steel chain slings in use on a regular
basis, but at least once a year. Paragraph
(b)(6)(ii) requires the employer to make
and maintain a record of the most recent
month in which each alloy steel chain
was inspected and make the record
available for examination.
Paragraph (c)(15)(ii) requires that all
welded end attachments of wire rope
slings be proof tested by the
manufacturer at twice their rated
capacity prior to initial use, and that the
employer retain a certificate of the proof
test and make it available for
examination.
Paragraphs (e)(1)(i), (ii), and (iii)
require that synthetic web slings be
marked or coded to show the
manufacturer’s name or trademark, the
rated capacity for the type of hitch and
the type of synthetic webbing material.
Paragraph (f)(2) requires that all hooks
for which no applicable manufacturer’s
recommendations are available be tested
twice before they are put into use. The
employer shall maintain a record of the
dates and results of the tests.
II. Special Issues for Comment
OSHA has a particular interest in
comments on the following issues:
• Whether the proposed information
collection requirements are necessary
for the proper performance of the
Agency’s functions, including whether
the information is useful;
• The accuracy of OSHA’s estimate of
the burden (time and costs) of the
information collection requirements,
including the validity of the
methodology and assumptions used;
• The quality, utility, and clarity of
the information collected; and
• Ways to minimize the burden on
employers who must comply; for
example, by using automated or other
technological information collection
and transmission techniques.
III. Proposed Actions
OSHA is requesting that OMB extend
its approval of the information
collection requirements contained in the
Standard on Rigging Equipment for
Material Handling (29 CFR 1926.251).
The Agency is requesting an adjustment
decrease of 4,520 burden hours (from
56,335 hours to 51,815 hours). This
decrease is a result of new data
indicating a drop in the number of
cranes and derricks from 132,737 to
122,091. The Agency will summarize

E:\FR\FM\24AUN1.SGM

24AUN1

wwoods2 on DSK1DXX6B1PROD with NOTICES_PART 1

52034

Federal Register / Vol. 75, No. 163 / Tuesday, August 24, 2010 / Notices

the comments submitted in response to
this notice and will include this
summary in the request to OMB.
Type of Review: Extension of a
currently approved collection.
Title: Rigging Equipment for Material
Handling (29 CFR 1926.251).
OMB Control Number: 1218–0233.
Affected Public: Business or other forprofits.
Number of Respondents: 1,220,910.
Frequency: On occasion.
Average Time per Response: Average
of 3 minutes (.05 hour) for an employer
to maintain and disclose a certificate to
30 minutes (.50 hour) for an employer
to acquire information and make a tag
for a sling.
Estimated Total Burden Hours:
51,815.
Estimated Cost (Operation and
Maintenance): $0.

read or download through this Web site.
All submissions, including copyrighted
material, are available for inspection
and copying at the OSHA Docket Office.
Information on using the http://
www.regulations.gov Web site to submit
comments and access the docket is
available at the Web site’s ‘‘User Tips’’
link. Contact the OSHA Docket Office
for information about materials not
available through the Web site and for
assistance in using the Internet to locate
docket submissions.
Electronic copies of this Federal
Register document are available at
http://www.regulations.gov. This
document as well as news releases and
other relevant information also are
available at OSHA’s Web page at http://
www.osha.gov.

IV. Public Participation—Submission of
Comments on This Notice and Internet
Access to Comments and Submissions
You may submit comments in
response to this document as follows:
(1) Electronically at http://
www.regulations.gov, which is the
Federal eRulemaking Portal; (2) by
facsimile (fax); or (3) by hard copy. All
comments, attachments, and other
material must identify the Agency name
and the OSHA docket number for the
ICR (OSHA Docket No. 2010–0038). You
may supplement electronic submissions
by uploading document files
electronically. If you wish to mail
additional materials in reference to an
electronic or facsimile submission, you
must submit them to the OSHA Docket
Office (see the section of this notice
titled ADDRESSES). The additional
materials must clearly identify your
electronic comments by your name,
date, and the docket number so the
Agency can attach them to your
comments.
Because of security procedures, the
use of regular mail may cause a
significant delay in the receipt of
comments. For information about
security procedures concerning the
delivery of materials by hand, express
delivery, messenger, or courier service,
please contact the OSHA Docket Office
at (202) 693–2350, (TTY (877) 889–
5627).
Comments and submissions are
posted without change at http://
www.regulations.gov. Therefore, OSHA
cautions commenters about submitting
personal information, such as social
security numbers and date of birth.
Although all submissions are listed in
the http://www.regulations.gov index,
some information (e.g., copyrighted
material) is not publicly available to

David Michaels, PhD, MPH, Assistant
Secretary of Labor for Occupational
Safety and Health, directed the
preparation of this notice. The authority
for this notice is the Paperwork
Reduction Act of 1995 (44 U.S.C. 3506
et seq.) and Secretary of Labor’s Order
No. 5–2007 (72 FR 31160).

VerDate Mar<15>2010

15:00 Aug 23, 2010

Jkt 220001

V. Authority and Signature

Signed at Washington, DC, on August 19,
2010.
David Michaels,
Assistant Secretary of Labor for Occupational
Safety and Health.
[FR Doc. 2010–21050 Filed 8–23–10; 8:45 am]
BILLING CODE 4510–26–P

DEPARTMENT OF LABOR
Occupational Safety and Health
Administration
[Docket No. OSHA–2010–0039]

Portable Fire Extinguishers (Annual
Maintenance Certification Record);
Extension of the Office of Management
and Budget’s (OMB) Approval of the
Information Collection (Paperwork)
Requirements
Occupational Safety and Health
Administration (OSHA), Labor.
ACTION: Request for public comment.
AGENCY:

OSHA solicits comments
concerning its proposal to extend the
Office of Management and Budget’s
(OMB) approval of the information
collection requirements contained in the
Portable Fire Extinguishers Standard
(Annual Maintenance Certification
Record) (29 CFR 1910.157(e)(3)).
DATES: Comments must be submitted
(postmarked, sent, or received) by
October 25, 2010.
ADDRESSES:
SUMMARY:

PO 00000

Frm 00060

Fmt 4703

Sfmt 4703

Electronically: You may submit
comments and attachments
electronically at http://
www.regulations.gov, which is the
Federal eRulemaking Portal. Follow the
instructions online for submitting
comments.
Facsimile: If your comments,
including attachments, are not longer
than 10 pages you may fax them to the
OSHA Docket Office at (202) 693–1648.
Mail, hand delivery, express mail,
messenger, or courier service: When
using this method, you must submit
three copies of your comments and
attachments to the OSHA Docket Office,
Docket No. OSHA–2010–0039, U.S.
Department of Labor, Occupational
Safety and Health Administration,
Room N–2625, 200 Constitution
Avenue, NW., Washington, DC 20210.
Deliveries (hand, express mail,
messenger, and courier service) are
accepted during the Department of
Labor’s and Docket Office’s normal
business hours, 8:15 a.m. to 4:45 p.m.,
e.t.
Instructions: All submissions must
include the Agency name and OSHA
docket number for the Information
Collection Request (ICR) (OSHA–2010–
0039). All comments, including any
personal information you provide, are
placed in the public docket without
change, and may be made available
online at http://www.regulations.gov.
For further information on submitting
comments see the ‘‘Public Participation’’
heading in the section of this notice
titled SUPPLEMENTARY INFORMATION.
Docket: To read or download
comments or other material in the
docket, go to http://www.regulations.gov
or the OSHA Docket Office at the
address above. All documents in the
docket (including this Federal Register
notice) are listed in the http://
www.regulations.gov index; however,
some information (e.g., copyrighted
material) is not publicly available to
read or download through the website.
All submissions, including copyrighted
material, are available for inspection
and copying at the OSHA Docket Office.
You may contact Theda Kenney at the
address below to obtain a copy of the
ICR.
FOR FURTHER INFORMATION CONTACT:

Theda Kenney or Todd Owen,
Directorate of Standards and Guidance,
OSHA, U.S. Department of Labor, Room
N–3609, 200 Constitution Avenue, NW.,
Washington, DC 20210; telephone (202)
693–2222.
SUPPLEMENTARY INFORMATION:

E:\FR\FM\24AUN1.SGM

24AUN1


File Typeapplication/pdf
File TitleDocument
SubjectExtracted Pages
AuthorU.S. Government Printing Office
File Modified2010-08-24
File Created2010-08-24

© 2024 OMB.report | Privacy Policy