Instructions

APPLICATION FORM FOR SINGLE RESIDENTIAL STRUCTURE OR LOT
AMENDMENTS TO NATIONAL FLOOD INSURANCE PROGRAM MAPS
General Background Information
In 1968, the U.S. Congress passed the National Flood Insurance Act, which created the National Flood Insurance Program
(NFIP). The NFIP was designed to reduce future flood losses through the adoption of local floodplain management
regulations and to provide protection for property owners against potential losses through an insurance mechanism that
allows a premium to be paid for the protection of those who need it most. The creation of the NFIP represented a major shift
in Federal strategy from previous structural flood-control and disaster relief programs.
As part of the agreement for making flood insurance available in a community, the NFIP requires the community to adopt
floodplain management ordinances that meet certain minimum requirements intended to reduce future flood losses. The
community official or agency responsible for floodplain management in a community may be able to provide information
that would be useful to a requester. This official or agency usually is responsible for engineering, public works, flood
control, or planning in the community as well.

Use of Application Forms
The Department of Homeland Security’s Federal Emergency Management Agency (DHS-FEMA) implemented the use of
application forms for requesting revisions or amendments to NFIP maps for two reasons. First, the forms provide requesters
with a comprehensive, step-by-step process to follow. This process provides the requester with assurance that all necessary
information to support their request is being submitted to DHS-FEMA at one time, thus avoiding the need to go through an
iterative process of providing additional information in a piecemeal fashion, which can result in a time-consuming and costintensive process. Second, use of the forms assures that the requesters’ submissions are complete and more logically
structured, and generally allows DHS-FEMA to complete its review in a shorter timeframe.
This form should be used to request that DHS-FEMA remove a single structure or a legally recorded parcel of land or a
portion of a parcel, described by metes and bounds, certified by a Registered Professional Engineer or Licensed Land
Surveyor, from a designated Special Flood Hazard Area (SFHA), an area that would be inundated by the flood having a 1percent-annual-chance of being equaled or exceeded in any given year (base flood), via Letter of Map Amendment (LOMA).
A LOMA is a letter from DHS-FEMA stating that an existing structure or parcel of land that has not been elevated by fill
(i.e. the existing structure or parcel of land is on natural grade) would not be inundated by the base flood. Fill is defined as
material from any source (including the subject property) placed that raises the ground to or above the Base Flood Elevation
(BFE). The common construction practice of removing unsuitable existing material (topsoil) and backfilling with select
structural material is not considered the placement of fill if the practice does not alter the existing (natural ground) elevation,
which is at or above the BFE. Fill placed before the date of the first NFIP map showing the area in an SFHA is
considered natural ground. You may consult with the community map repository or the community official or agency
responsible for floodplain management to obtain previous editions of the NFIP map. In addition, digital copies of historic
maps may be available on DHS-FEMA’s Map Service Center (MSC), for a nominal fee. To place orders from the MSC,
interested parties may visit the MSC website at http://www.msc.fema.gov. For additional information regarding historic
maps, interested parties may contact the DHS-FEMA Map Information eXchange (FMIX) toll free, at 1-877-FEMA MAP (1877-336-2627).
The MT-EZ form shall not be used for requests submitted by developers, for requests involving multiple structures or lots,
for property in alluvial fan areas, for property located within the regulatory floodway, for requests involving the placement of
fill, or for conditional requests—for such requests, requesters should use the MT-1 or MT-2 application forms, as
appropriate. The MT-1 and MT-2 forms packages may be downloaded from the DHS-FEMA Flood Hazard Mapping website
at. http://www.fema.gov/plan/prevent/fhm/frm_form.shtm.
A faster alternative to using the MT-EZ application is eLOMA. eLOMA is a web-based application that provides licensed
land surveyors and professional engineers a system to submit simple LOMA requests to FEMA. Most requests that qualify
for the MT-EZ application can be submitted to FEMA using eLOMA. You can find additional information about eLOMA at
https://hazards.fema.gov.

Instructions MT-EZ Form (086-0-22) SEP 10

1

For additional assistance in completing this form, interested parties may consult the LOMA Tutorial, available on DHSFEMA’s Flood Hazard Mapping website at: http://www.fema.gov/plan/prevent/fhm/ot_lmreq.shtm. This tutorial provides
guidance to LOMA requesters, as well as an online tool to complete the MT-EZ form.

Data Submission Requirements
In accordance with NFIP regulations, DHS-FEMA will use the information provided in the MT-EZ form to determine
whether property (i.e., structure, parcel of land) should be removed from a designated SFHA. In certain instances, additional
data not referenced on the MT-EZ form may be required. A DHS-FEMA representative will notify the requester of any
additional data requirements.
DHS-FEMA encourages the submission of the required data in digital format (e.g. scanned documents on a CD). This may
help expedite the processing of your request.

Applicable Regulations
The regulations pertaining to LOMAs are presented in Title 44, Chapter I, Code of Federal Regulations (CFR), Part 70,
which are available at http://www.access.gpo.gov/nara/cfr/waisidx_03/44cfr70_03.html. The purpose of Part 70 is to provide
an administrative procedure whereby DHS-FEMA will review information submitted by an owner or lessee of property who
believes that their property has been inadvertently included in a designated SFHA. Part 70 provides information about the
technical difficulty of accurately delineating the SFHA boundaries on the NFIP map for a community. Part 70 procedures
shall not apply if the topography has been altered to raise the original ground to or above the BFE since the effective date of
the first NFIP map [i.e., a Flood Insurance Rate Map (FIRM) or Flood Hazard Boundary Map (FHBM)] showing the property
to be within the SFHA.

Basis of Determination
If no fill has been placed, DHS-FEMA’s determination as to whether a structure or legally recorded parcel of land, or a
portion of a parcel, described by metes and bounds, may be removed from the SFHA will be based on a comparison of the
BFE with certain elevation information. The elevation information required will depend on whether a structure or a legally
recorded parcel of land is to be removed from the SFHA. For LOMA requests involving property located in Zone A, with no
BFEs determined, interested parties should refer to DHS-FEMA-265, Managing Floodplain Development in Approximate
Zone A Areas, A Guide for Obtaining and Developing Base (100-Year) Flood Elevations, available on DHS-FEMA’s website
at http://www.fema.gov/library/viewRecord.do?id=2215.
The following special considerations may affect DHS-FEMA's determination:
In areas of shallow/sheet flooding (Zone AO), the elevation of the Lowest Adjacent Grade (including deck posts) of the
structure(s) must be above the surrounding grade by an amount equal to or greater than the depth shown on the NFIP
map. In addition, adequate drainage paths are required to guide floodwaters around and away from the structure(s); the
structure(s) should be on an elevated pad within the Zone AO area. With your application package, in addition to
elevation information regarding the structure(s), provide a map showing the topographic data of the property and the
immediate surrounding area, and the location of any structure(s) existing on the property (certified by a registered
professional engineer or licensed land surveyor) to demonstrate that the above criteria have been met.
If the lowest floor of a building has been elevated on posts, piers, or pilings above the BFE and any portion of the
structure (i.e., posts, pilings, or piers) is still below the BFE, the building will not be removed from the SFHA.

Response Timeframe
In accordance with Section 70.4 of the NFIP regulations, DHS-FEMA will notify the requester of the determination in
writing within 60 days of the date of receipt of all required data. Information about the status of active LOMA requests and
other Letter of Map Change (LOMC) requests is available from DHS-FEMA’s Mapping Information Platform (MIP) at
https://hazards.fema.gov. The MIP allows requesters to search Open LOMCs by entering their Project (Case) Number and
Project Type to find out the status of their request. From the MIP Home Page requesters should click on Tools & Links,

Instructions MT-EZ Form (086-0-22) SEP 10

2

Public Reports and select Public Reports from the Report Category dropdown. Information about the status of LOMA
requests and other Letter of Map Change (LOMC) requests is also available from DHS-FEMA’s Flood Hazard Mapping web
site at http://www.fema.gov/plan/prevent/fhm/st_main.shtm. The FHM site allows requesters to search LOMCs by entering
their Project (Case) Number or Community Name.
As mentioned previously, submitting the MT-EZ form and required supporting documents in digital format may help
expedite the processing of your request.

Effect on Insurance Purchase Requirements
Although DHS-FEMA may issue a LOMA removing a structure from the SFHA, it is the lending institution's prerogative to
require flood insurance, as a condition of a loan, if it deems such action appropriate. Historically, about 25% of all flood
claims occur in areas outside of the SFHA. Property owners are strongly encouraged to convert their existing policy, using
the premiums already paid for that policy, to a lower-cost Preferred Risk Policy (PRP), which is available for structures
located outside of the SFHA. For more information about the PRP, contact your agent or broker or visit
http://www.floodsmart.gov/prp.
If the lender agrees to waive the flood insurance purchase requirement, the property owner is eligible for a full refund of the
premium paid for the current policy year, provided that no claim is pending or has been paid on the policy in question during
the same policy year. If the property owner has been required to renew his or her policy during a period when a revised NFIP
map was being printed, the premium will be refunded for an additional year. To initiate processing of the refund and/or
converting that policy to a lower-cost PRP to maintain coverage without interruption, the property owner should provide the
LOMA and evidence of the waiver of the flood insurance requirement from the lender to the insurance agent or broker who
sold the policy.

General Instructions – Section A
The property owner, a Licensed Land Surveyor, or a Registered Professional Engineer may complete Section A to support a
request for a LOMA for a single structure or lot.
Before completing Section A, the requester must obtain one of the following documents from the County/Parish Clerk,
Recorder, or Register of Deeds for the community:
A copy of the Deed for the property, showing the recordation information (e.g., Book/Volume and Page numbers or
Document/Instrument number) containing the recorder's seal and recordation date, accompanied by a tax assessor's or
other suitable map showing the surveyed location of the property relative to local streets and watercourses. The map
should include at least one street intersection that is shown on the FIRM panel.
A copy of the Plat Map for the property, showing the recordation information (e.g., Book/Volume and Page numbers or
Document/Instrument number) and containing the recorder's seal and recordation date.
The requester must also obtain a photocopy of the effective FIRM panel (including the Title Block) that shows the area in
which the property is located. This map should be available at the community map repository or from the community official
or agency responsible for floodplain management. However, digital copies of the FIRM Index and FIRM panels may be
ordered from the DHS-FEMA Map Service Center (MSC), for a nominal fee. To place orders from the MSC, interested
parties may visit the MSC website at http://www.msc.fema.gov. A FIRMette, which can be printed free of charge from the
MSC website, may be submitted in lieu of a photocopy of the FIRM. (For some communities, the effective NFIP map may
be a Flood Hazard Boundary Map (FHBM), not a FIRM. In such cases, the requester should obtain and use the FHBM.)
The DHS-FEMA Map Service Center allows requesters to search for maps and other technical data. Requesters can search
by the three following search options: Catalog, Map Search, and Quick Order. The Catalog option allows requesters to
search through the DHS-FEMA Map Service Center for all available data. The Map Search option allows requesters to
search for data available for an individually specified map area. The Quick Order option allows requesters to search and
order available data (digital only) by specific FIRM panel or by state, county, or community identification number. All
search options will allow requesters to search desired data and add that data to a "shopping cart" for later payment options.
Payment must be in the form of a credit card. Only Visa, MasterCard, and American Express are accepted.
Instructions MT-EZ Form (086-0-22) SEP 10

3

Requesters without Internet access should contact the FMIX by calling 1-877-FEMA MAP (1-877-336-2627). Requesters
also may fax their map order requests to the MSC at 1-800-358-9620.

Specific Instructions – Section A
Number 1 - Fill Placement
Regardless of the type of LOMC being requested, the requester must clearly state, to the best of his or her knowledge,
whether fill has been placed on the property. The requester must answer ―yes‖ or ―no‖ to this question. (See ―Use of
Application Forms‖ for additional information about fill.) If fill has been placed on the property, the requester must submit a
request for a Letter of Map Revision Based on Fill (LOMR-F) using the MT-1 application forms so that DHS-FEMA may
determine whether the structure or property should be removed from the SFHA. To obtain a copy of the MT-1 application
forms package, interested parties should visit DHS-FEMA’s Flood Hazard Mapping website at
http://www.fema.gov/plan/prevent/fhm/dl_mt-1.shtm or call the DHS-FEMA Map Information eXchange, toll free, at 1-877FEMA MAP (1-877-336-2627).
Number 2 - Legal Description of Property
The requester must describe the property by referring to the recorded deed or plat map. The description may consist of a lot
number and subdivision name, a parcel number, a tract number, or any other information provided in the deed or plat to
identify the property. It is not necessary to reproduce a lengthy description of the property as it appears in the Deed. In
addition, the requester should enter the street address (911 type) for the property, if one is available.
Number 3 - Structure or Property That Is Subject of Request
DHS-FEMA will make a LOMA determination for a structure or a parcel of land. The requester must select the one for which
they would like DHS-FEMA to make a determination. If the request is for a structure, the requester must provide the date of
construction in this section. Date of construction information usually may be obtained from real estate settlement documents,
the property developer, or the local government office where real estate and/or land development transactions are recorded.
If the request is for a portion of a parcel, a certified metes and bounds description and map of the area to be removed,
certified by a licensed land surveyor or registered professional engineer, are required. The metes and bounds description
must cover the specific area to be removed, and it must be tied to an identifiable starting point. If the description is for a
legally recorded lot or parcel, the metes and bounds description should commence or begin at the lot or parcel corner. Metes
and bounds descriptions must not intersect or coincide with the footprint of an existing structure. Please see the example
below for the preferred format of metes and bounds descriptions.
BEGINNING at the northeast lot corner; thence S16°42’22‖E, 100.00 feet; thence S33°14’40‖W, 145.92
feet; thence S89°13’29‖W, 156.01 feet; thence N16°42’22‖W, 223.14 feet; thence 210.49 feet along a
curve to the left having a radius of 542.00 feet to the POINT OF BEGINNING
DHS-FEMA encourages the submission of metes and bounds descriptions in digital format on a CD. This may help expedite
the processing of your request.
Signature
The requester must provide his or her name, mailing address, and telephone number in the space provided. The requester
also must sign and date, where indicated, to certify the accuracy of the information provided in Section A of the form. A
Licensed Land Surveyor, Registered Professional Engineer, or other designated agent may sign this form for the requester
when submitting on behalf of the requester. Providing an email address is optional, however, providing one will make it
easier for DHS-FEMA to contact you if necessary and may facilitate the processing of your request.

General Instructions – Section B

Instructions MT-EZ Form (086-0-22) SEP 10

4

A Licensed Land Surveyor or Registered Professional Engineer (authorized by law to certify the information requested) must
complete Section B unless an NFIP Elevation Certificate has already been completed for the property. If the request is to
remove the structure, and an Elevation Certificate has been completed, the Elevation Certificate may be submitted in lieu of
Section B of the MT-EZ form. If the request is to remove the entire legally recorded property, the lowest lot elevation must
be provided in Section B. If the request is to remove a portion of the legally recorded property, the lowest elevation within
the described portion must be provided in Section B.
Before completing Section B, the surveyor or engineer must obtain the effective FIRM panel, effective Flood Boundary and
Floodway Map (FBFM) panel (if printed), and Flood Insurance Study (FIS) report that cover the area in which the property is
located. These can be obtained from the community map repository, or digital copies ordered from the MSC for a nominal
fee. To place map orders from the MSC online, the engineer or surveyor should visit http://www.msc.fema.gov. (For some
communities, the effective NFIP map may be an FHBM), not a FIRM. In such cases, the engineer or surveyor should obtain
and use the FHBM.)
The DHS-FEMA Map Service Center allows users, including homeowners, surveyors, and engineers, to search for maps and
other technical data. Searches can be conducted under the three following search options: Catalog, Map Search, and Quick
Order. The Catalog option allows surveyors and engineers to search through the Map Service Center for all available data. The
Map Search option allows surveyors and engineers to search for data available for an individually specified map area. The
Quick Order option allows surveyors and engineers to search available data by a specific FIRM panel or by state, county, or
community identification number. All search options will allow surveyors and engineers to search desired data and add that
data to a "shopping cart" for later payment options. Payment must be in the form of a credit card. Only Visa, MasterCard, and
American Express are accepted.
Surveyors and engineers who do not have Internet access should contact the FMIX by calling 1-877-FEMA MAP (1-877-3362627). They also may fax their map order requests to the MSC at 1-800-358-9620.

Specific Instructions – Section B
Determination Requested For
The surveyor or engineer must identify what is to be removed from the SFHA. The surveyor or engineer must provide the
required elevation information as described on the form.
Number 1 – Property Information
The surveyor or engineer must provide a brief description of the property by referring to the recorded deed or plat map. The
description may consist of a lot number and subdivision name, a parcel number, a tract number, or any other information
provided in the deed or plat to identify the property. It is not necessary to reproduce a lengthy description of the property as
it appears in the Deed.
Number 2 - Structure Information
The surveyor or engineer must provide the street address for the property (911 type), if one is available, or the name of road
providing access.
If the request involves or will involve a structure, the surveyor or engineer must provide the type of construction.
Crawl Space – The bottom floor is below the first floor, is enclosed by solid and partial perimeter walls, and may be
above ground level (grade) on one or more sides. Spaces below ground level on all sides must meet the requirements
of FEMA Technical Bulletin 11-01. Spaces with a bottom floor elevation more than 2.0 feet below the Lowest
Adjacent Exterior Grade (LAG) elevation will be classified as a basement.
Slab on Grade – The bottom floor is at or above ground level (grade) on at least one side.
Basement/Enclosure – The bottom floor (basement or underground garage) is below ground level (grade) on all
sides. See Crawl Space above.

Instructions MT-EZ Form (086-0-22) SEP 10

5

Other – All other structure types not listed above including, but not limited to split levels, structures on piers, mobile
homes, etc. Please be as detailed as possible.
Number 3 – Geographic Coordinate Data
The surveyor or engineer must provide the latitude and longitude of the property in decimal degrees to the nearest fifth
decimal place (00.00000), and indicate the appropriate horizontal datum, WGS 84, NAD 83 or NAD 27.
Number 4 - Flood Insurance Rate Map Information
In the first box, the surveyor or engineer must provide the six digit NFIP community number as it appears in the Title Block
of the FIRM (or FHBM) panel that shows the area where the property is located. In the second box, the surveyor or engineer
must provide the map panel number. For additional information on reading FIRM panels interested parties may consult the
tutorial
―How
to
Read
a
FIRM‖
on
DHS-FEMA’s
Flood
Hazard
Mapping
website
at
http://www.fema.gov/plan/prevent/fhm/ot_firmr.shtm.

In the third box, the surveyor or engineer should provide the BFE, if available. FEMA will verify the BFE during the review
process. In the fourth box, the surveyor or engineer must provide the source of the BFE. The surveyor or engineer may
obtain the BFE by locating the property on the effective FIRM for the community in which the property is located. Upon
locating the property on the FIRM, the engineer or surveyor should determine the type of flooding and the flood zone where
the property is located. The summary below provides guidance as to how to determine the BFE as a result of the flooding
type and flood zone determination.
Riverine Flooding Systems (Zones AE or A1-A30) – Consult the FIS report for the community in which the
property is located. Locate the flood profile for the flooding source by name. Estimate the property’s location along
the flood profile and interpolate the BFE using the 100-year flood profile line.
Instructions MT-EZ Form (086-0-22) SEP 10

6

Lacustrine (Stillwater) Flooding Systems – Consult the FIS report for the community in which the property is
located. Locate the Summary of Stillwater Elevations table. Locate the flooding source, by name, and use the BFE
listed in the table. The flooding source’s BFE is normally shown to the nearest 0.1 foot. If the flooding source is
not listed in the Summary of Stillwater Elevations table, use the BFE as shown on the FIRM.
Coastal Flooding Systems (Zones AE or A1-A30 and VE or V1-V30) – Obtain the BFE from the FIRM panel.
Consult the FIS report for the community in which the property is located. Locate the Summary of Stillwater
Elevations table in the FIS report. Identify the flooding source, by name, and use the BFE listed in the table.
Compare the BFE listed in this table to the BFE obtained from the FIRM. If the stillwater elevation listed in the
table is less than or equal to the whole-foot BFE shown on the FIRM minus 0.5 foot, a wave height, wave runup,
and/or wave setup component exists. In this case, use the whole-foot BFE shown on the FIRM. If the stillwater
elevation listed in the table is greater than the whole-foot BFE shown on the FIRM minus 0.4 foot, use the stillwater
elevation shown in the table as the BFE. (Any structure/parcel of land located seaward of the landward toe of
the primary frontal dune may not be removed from a Zone VE or V1-V30.)
Zone A Flooding – If the property is located in Zone A, an area of approximate flooding with no BFEs determined,
determine a BFE. Consult with a Federal, State, or local government agency to determine if that agency has
developed a BFE. Such agencies include the U.S. Army Corps of Engineers; the U.S. Geological Survey; the State’s
Department of Natural Resources, Department of Environmental Quality, or Department of Transportation; or the
local Planning and Zoning Department. If one has been developed, all supporting data and calculations used to
develop the BFE must be submitted. If a BFE has not previously been developed, consult DHS-FEMA 265,
Managing Floodplain Development in Approximate Zone A Areas, A Guide for Obtaining and Developing Base
(100-Year)
Flood
Elevations,
available
on
the
DHS-FEMA
website
at
http://www.fema.gov/library/viewRecord.do?id=2215. This publication is an excellent resource that details the
appropriate methods for determining BFEs in SFHAs designated Zone A. To obtain additional information about
developing BFEs, contact the DHS-FEMA Map Information eXchange, toll free, at 1-877-FEMA MAP (1-877-3362627). If the property is greater than 50 lots or 5 acres, whichever is the lesser, the engineer or surveyor must
determine a BFE in accordance with Paragraph 60.3(b)(3) of the NFIP regulations, available online at
http://www.access.gpo.gov/nara/cfr/waisidx_03/44cfr60_03.html .
Shallow Flooding (Zone AH) – For a property located in Zone AH, locate the Summary of Stillwater Elevations
table in the FIS report. Identify the flooding source, by name, and use the BFE listed in the table. If no Summary of
Stillwater Elevations table exists, use the BFE shown on the FIRM. If different elevations appear within the same
SFHA, the BFE is obtained by linear interpolation between two adjacent BFE lines.
Shallow/Sheet Flooding (Zone AO) – For a property located in Zone AO, the characteristics of the Zone AO area
shown on the NFIP map will determine the appropriate methodology to be used to develop the BFE for the property.
If the flooding is conveyed by the street, provide the highest top of curb or crown of street elevation (whichever is
higher) along the property line and add this to the depth of flooding. The lowest adjacent grade elevation must be
above the curb or street elevation by an amount equal to or greater than the depth of flooding shown on the NFIP
map. If the entire property is inundated by the SFHA and the flow is not conveyed by the street, add the depth of
flooding to the average surrounding grade. If the property is partially inundated by the SFHA and the street does not
convey the flow, add the depth of flooding to the lowest lot elevation. Along with the information required for one
of the above-mentioned methods, provide sufficient certified topographic information, including flow paths, to show
that the structure is located on high ground relative to the depth indicated on the NFIP map.
Number 5 – Elevation Information
Lowest Adjacent Grade (LAG) to the Structure – For requests involving a structure, provide the LAG elevation (the elevation
of the lowest ground touching the structure including attached patios, stairs, deck supports or garages), to the nearest 0.1 foot.
If the FIRM shows BFEs in meters, the accuracy of the LAG elevation must be to the nearest 0.1 meter.
Lowest Lot Elevation – For requests involving property, or a portion thereof, not a structure, provide the lowest lot elevation
to the nearest 0.1 foot. If the FIRM shows BFEs in meters, the accuracy of the lowest lot elevation must be to the nearest 0.1

Instructions MT-EZ Form (086-0-22) SEP 10

7

meter. If the BFE varies across the property, please provide a certified site plan showing the range of elevations across the
property.
Elevation Datum – Provide the elevation datum (e.g., National Geodetic Vertical Datum of 1929, North American Vertical
Datum of 1988 or other specified) for which the property elevations shown on the form are referenced. If the datum being
referenced is different than the datum used to produce the effective FIS, provide the datum conversion. Please note that
Mean Sea Level Datum is used within the Commonwealth of Puerto Rico and Local Tidal Datum is used within the U.S.
Virgin Islands.
Subsidence or Uplift – Land subsidence is the lowering of the ground as a result of water, oil, gas extraction, as well as other
phenomena such as soil compaction, decomposition of organic material, and tectonic movement. Periodically, the National
Geodetic Survey relevels some benchmarks to determine new elevations above the National Geodetic Vertical Datum of
1929 or above the North American Vertical Datum of 1988; however, not all benchmarks are releveled each time.
Check ―yes‖ if the area of the property is in an area of subsidence or uplift, and provide the date of the current releveling;
check ―no‖ if the area of the property is not in an area of subsidence or uplift. In areas experiencing ground subsidence
(e.g., Harris County, Texas, and Incorporated Areas); the most recently adjusted Elevation Reference Mark (ERM) must be
used for accurate ground and structure elevations. Consult the effective FIS report for the community where the property is
located or the local floodplain administrator for the most current ERM data.
In general, the effects of subsidence can be accounted for by determining ground and structure elevations using benchmark
elevations with the same releveling date as the benchmarks used to develop the BFEs on the FIRM. Benchmark releveling
dates may be different for different flooding sources. No adjustment is necessary to the BFEs on the FIRM.
Certification (by a Licensed Land Surveyor, Registered Professional Engineer, or Architect)
The certifier must provide his or her name, license number and expiration date, his or her company name, telephone number
and, if applicable, his or her fax number and email address. The certifier’s seal, if available, may be provided here. The
certifier must sign and date the Elevation Form, where indicated, to certify the accuracy of the information provided. Not all
states authorize architects and engineers to certify elevation information. Consult the state board of registration for more
information.

Submitting the Package to DHS-FEMA
In addition to the completed MT-EZ form, all requests must include one copy of the subdivision plat map (with recordation
data and stamp of the Recorder’s Office) or a copy of the property deed (with recordation data and stamp of the Recorder’s
Office), accompanied by a tax assessor’s map or other suitable map showing the surveyed location of the property with
respect to local streets and watercourses; a copy of the effective FIRM panel; and a map scale and North arrow for all maps
submitted. Please do not submit original documents. Please retain a copy of all submitted documents for your records.
DHS-FEMA encourages the submission of all required data in digital format (e.g. scanned documents on a CD).
All LOMA requests should be sent to the address listed below.

LOMC CLEARINGHOUSE
6730 SANTA BARBARA COURT
ELKRIDGE, MD 21075
Attn.: LOMA Manager
Interested parties who have any additional questions about the LOMA request process may consult the DHS-FEMA Flood
Hazard Mapping website at http://www.fema.gov/plan/prevent/fhm/fmc_loma.shtm or call the DHS-FEMA Map Information
eXchange, toll free, at 1-877-FEMA MAP (1-877-336-2627). For information on the status of a particular LOMA request,
interested parties may also consult DHS-FEMA’s Mapping Information Platform (MIP) at https://hazards.fema.gov.

Instructions MT-EZ Form (086-0-22) SEP 10

8