NATIONAL SECURITY ASSESSMENT - U.S. Information Network

National Security and Critical Technology Assessments of the US Industrial Base

Survey.BIS.Assessment.Dec10OMB

DOD Telecom Survey

OMB: 0694-0119

Document [doc]
Download: doc | pdf

55

OMB Control Number 0694-0119

Expiration Date: 01/31/2013

NATIONAL SECURITY ASSESSMENT:

U.S. Information Network Infrastructure

SCOPE OF ASSESSMENT


The U.S. Department of Commerce, Bureau of Industry and Security (BIS), Office of Technology Evaluation (OTE), in coordination with the U.S. Department of Defense, Office of the Assistant Secretary for Defense Networks and Information Integration, is conducting a national security assessment regarding the U.S. telecommunications infrastructure and its supply chains. The principal goal of this data collection is to quantify replacement cycles for information network equipment; document network maintenance and procurement practices, and understand issues affecting network reliability and integrity. This effort will also identify best practices to help ensure the operational reliability of critical national information network infrastructure.


RESPONSE TO THIS SURVEY IS REQUIRED BY LAW


A response to this survey is required by law (50 U.S.C. app. Sec. 2155). Failure to respond can result in a maximum fine of $10,000, imprisonment of up to one year, or both. Information furnished herewith is deemed confidential and will not be published or disclosed except in accordance with Section 705 of the Defense Production Act of 1950, as amended (50 U.S.C App. Sec. 2155). Section 705 prohibits the publication or disclosure of this information unless the President determines that its withholding is contrary to the national defense. Information will not be shared with any non-government entity, other than in aggregate form. The information will be protected pursuant to the appropriate exemptions from disclosure under the Freedom of Information Act (FOIA), should it be the subject of a FOIA request.


Not withstanding any other provision of law, no person is required to respond to nor shall a person be subject to a penalty for failure to comply with a collection of information subject to the requirements of the Paperwork Reduction Act unless that collection of information displays a currently valid OMB Control Number.


BURDEN ESTIMATE AND REQUEST FOR COMMENT


Public reporting burden for this collection of information is estimated to average 14 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information to BIS Information Collection Officer, Room 6883, Bureau of Industry and Security, U.S. Department of Commerce, Washington, D.C. 20230, and to the Office of Management and Budget, Paperwork Reduction Project (OMB Control No.---- - ----), Washington, D.C. 20503.

BUSINESS CONFIDENTIAL - Per Section 705(d) of the Defense Production Act


Section II WHO MUST RESPOND TO THIS SURVEY

Select the description that most closely reflects your company’s operations from 2006–2010.

1.


My company operates in the following ways, as a:


[Check all that apply]


Note: If your company only engages in reselling information network capacity, you may be exempt from having to complete this survey. See BIS staff contact information above.


Facility-based carrier


Capacity reseller


Managed Services Provider


Other [Describe in space below]

Comments:

2.




My company owns and/or operates in the United States the following types of data and communications network facilities:

[Check all that apply]


Owns

Operates


Owns

Operates




Terrestrial wired networks



Satellite ground stations



Cellular wireless networks



Undersea cable landing stations



Cable Information/ Television Networks



Other [Describe in space below]

Comments:

Please select the description that most closely reflects your company’s operations from 2006–2010.

3.


My company operates as a:


[Check all that apply]



Local exchange carrier


Inter-Exchange carrier


Wholesale transport carrier


Cable TV provider


Triple-Play” service provider (Cable TV, Telephone, Internet)


Other (Explain below)


Lessor of Information Infrastructure (e.g. dark fiber)


Internet service provider


None of the Above

Comments:

EXEMPTION FROM SURVEY


If you selected “No” for questions 1-3, you may be exempt from completing this U.S. Government survey. Please call one of the BIS contacts listed in “General Instructions” to verify your status. Then, complete, print out, and send a signed copy of the “Certification” page in PDF format [only after your BIS point-of-contact confirms your company’s or organization’s exemption] to our office via e-mail at: infonetwork[email protected].



BUSINESS CONFIDENTIAL - Per Section 705(d) of the Defense Production Act


U.S. Information Network Infrastructure Survey

Table of Contents

Section #

Section Name

Page #

I

Scope of Assessment

1

II

Who Must Respond to this Survey

2

III

Table of Contents

3

IV

General Instructions

4

IV

Definitions

5

1a

Network Systems – Corporate Profile: Company Information

13

1b

Network Systems – Corporate Profile: Facility & Service Information

14

1c

Network Systems – Corporate Profile: Equipment & Software Procurement

17

1d

Network Systems – Corporate Profile: Business & Operational Practices

21

1e

Network Systems – Corporate Profile: Equipment Acquisition Finance

28

1f

Network Systems – Corporate Profile: Wireless Network Equipment

30

2a

Network Systems – Facility Profile: Management & Capability

32

2b

Network Systems – Facility Profile: Types of Organizations Served

36

3a

Network Systems – Facility Profile: Current Types of Installed Equipment

37

3b

Network Systems – Facility Profile: Current Modes for Updating Equipment Software

50

4

Network Systems – Facility Profile: Counterfeit Network Systems, Subsystems, and Components

53

5

Network Systems – Facility Profile: Security Assurance – Network Operations & Anomalies

54

6

Certification

55

7

Comments on Survey

55

8

Transmission Instructions For Completed Survey

55




BUSINESS CONFIDENTIAL - Per Section 705(d) of the Defense Production Act











Section III GENERAL INSTRUCTIONS

A.


Your company is required to complete this survey using the Excel-based survey template, which must be downloaded from the BIS website. At your request, BIS staff will e-mail the Excel survey template directly to your company. For your convenience, a PDF version of the survey is available on the BIS website to aid internal data collection. DO NOT use the PDF to submit your company’s response to BIS.



B.


If information is not available from your records in the form requested, you may furnish estimates.



C.

General Instructions: Please respond to every question. Surveys that are not fully completed will be returned for completion. Use comment boxes to provide information to supplement responses provided in the survey form.

Under no circumstances may data or information be pasted, or otherwise electronically transferred, into survey answer boxes. All responses must be keyboarded in answer boxes or selected from the survey document’s drop-down menus. Surveys containing pasted responses can not be scored in BIS compilers and will be returned to respondents for proper completion.


For assistance regarding the survey, contact any of the Office of Technology staff members listed below.


Important: This survey may not be submitted in paper form. Please submit the completed survey document in Microsoft Excel 1997-2002 format at www.infonetwork[email protected]. If you can not upload the survey document, contact Office of Technology Evaluation staff



D.

Points of Contact for Questions Regarding This Survey:


Erika Maynard, Trade and Industry Analyst – 202-482-5572; [email protected]

Anna Bruse, Trade and Industry Analyst - 202-482-7418; [email protected]

Michael Caughey, Trade and Industry Analyst – 202-482-5415; [email protected]

Michael Finucane, Trade and Industry Analyst - 202-482-3893; [email protected]

Woodrow McClure, Trade and Industry Analyst – 202-482-2081; [email protected]

Mark Crawford, Senior Trade and Industry Analyst - 202-482-8239; [email protected]


C.


For letter correspondence to the Office of Technology Evaluation, please write to:


Brad Botwin, Director, Industrial Studies

Office of Technology Evaluation, Room 1093

U.S. Department of Commerce

1401 Constitution Avenue, NW

Washington, DC 20230

[email protected]


Please do not mail or e-mail completed surveys to our office; all surveys must be submitted electronically to our secure website.


BUSINESS CONFIDENTIAL – Per Section 705(d) of the Defense Production Act


Section IV- a

Definitions – Wired Network Systems

Term


Add/Drop

Allows optical wavelengths to be added or dropped at any line amplifier location.

Add-Drop Multiplexer (ADM)

A device that enables data to enter and leave a SONET bit stream without having to de-multiplex the stream. An Add/Drop Multiplexer (ADM) is an example of Line-Terminating Equipment (LTE) that originates or terminates one or more sections of a line signal.

Aggregation Routers

A router that enables service providers and enterprise edge networks to combine lower rate services (such as simultaneously host resource-intensive integrated data, voice and video business and consumer services) into a higher rater communications path. Also known as aggregation service routers, these devices may incorporate platform software virtualization to enable "instant-on" provisioning and simultaneous use of a wide range of service functionality, including firewall, Internet protocol security (IPSec), virtual private networks, deep-packet inspection (DPI), and session border control activities.

Anti-Virus Systems

Products and technology used to detect, protect and remove malicious code from infected systems. Antivirus product vendors share information and resources to ensure rapid response to malicious code outbreaks. Most antivirus vendors participate in independent testing that certifies their products to detect and/or disinfect viruses.

Asynchronous Transfer Mode (ATM)

A cell-based transmission and switching technique employing asynchronous time division multiplexing. It encodes data into small fixed-sized cells (cell relay) and provides data link layer services that run over Open Systems Interconnection (OSI) model Layer 1 physical links. ATM is a core protocol used over the SONET/SDH backbone of the Integrated Services Digital Network.

Asynchronous Transfer Mode (ATM) Core Switch

A switch device whose primary purpose is to switch fixed ATM cells based on information carried in the ATM cell header (a specialized region where the address information is stored for the source and destination). A core ATM switch grooms traffic for port capacities greater than or equal to 622 megabits per second.

Authorized Distributors

Companies that are contractually authorized by original component manufacturers (OCMs) and original equipment manufacturers (OEMs) to market and sell their products.

Automated Optical Patch Panel

An automated system for engaging and disengaging optical patch cords through a mechanical, optical mechanical, or other robotic mechanisms.

Backbone

The primary network path for transporting traffic between network segments; also defined as a high-speed line, or a series of connections that form major pathways within a network.

Business Support System (BSS)

Business support systems typically refer to "business systems" for dealing with customers, supporting processes such as taking orders, processing bills, and collecting payments.

Capacity Reseller

Local exchange carriers and independent operators of fiber optic networks that possess surplus, unutilized “lit” fiber capacity, or inactive “dark” fiber capacity, for lease a short-term or long-term basis to carriers in need of additional capacity.

Carrier Ethernet Services Router

Carrier-class Ethernet router devices that support standardized services, including native Ethernet, Ethernet private line, Ethernet virtual private line, Ethernet private LAN, and Ethernet virtual private LAN, and Ethernet private tree.

Cellular Networks

Analog or digital systems that facilitate communications between mobile devices such as telephone handsets that operate in the 800-900, or 1,800-1,900 mega hertz frequency ranges. This encompasses the Personal Communications Services (PCS) standard. These systems support time division multiple access (TDMA), code division multiple access (CDMA), global system for communications (GSM) access methods.

Central Office

The location where common carriers, or service providers, terminate customer lines and locate the switching equipment that interconnects those lines. A centralized location for the Switching, Transmission and Power equipment that provide telephone service.

Class 5 Telephony Switch

A telephone switch or telephone exchange in the Public Switched Telephone Network (PSTN) located at the local telephone company's central office, directly serving subscribers. Class 5 switch services include basic dial-tone, calling features, and additional digital and data services to subscribers using the local loop. Class 5 switches were slower to convert from circuit switching technologies to time division multiplexing than the other switch classes.

Competitive Local Exchange Carrier (CLEC)

A telecommunications provider company or carrier that competes with established carriers (e.g., incumbent local exchange carriers (ILECs).


Core Ethernet Aggregation and Switching

Core ethernet switches supporting ports where band-width is greater than or equal to 10 gigabits per second. Based on Ethernet protocol as the primary switching mechanism, and may also incorporate for the purposes of quality of service Multi-Protocol Label Switching (MPLS) and VLAN switching techniques.

Coarse Wave Division Multiplexer (CWDM)

Coarse wavelength division multiplexing (CWDM) is a method of combining several wave lengths widely spaced (greater than or equal 5 nm ) on a single fiber. CWDM systems typically do not support inline optical amplification.

Core

The highest capacity equipment (routers, switches, optical transports, fiber, etc.) and links in a network.

Core Internet Protocol/Multi-Protocol Label Switching

Core Internet Protocol/Multi-Protocol Label Switch typically have port speeds of greater than or equal to 10 gigabits per second.

Data Center

A facility housing computer systems, information network switches, information network servers, data storage systems, and associated components. These facilities generally provide redundant power supplies, redundant data communications connections, environmental controls (e.g., air conditioning, fire suppression) and security devices. Such facilities are also called a server farm.

Digital Cross Connect System (DCS)

A network device used by telecom carriers and large enterprises to switch and multiplex low-speed data signals onto high-speed lines. Digital cross-connects (DCSs) are widely used in conjunction with central office switches and may be installed both before and/or after the switch. Cross-connections are established via an administrative process and are semi-permanent. DCS systems typically operate on digital containers in time division multiplex protocols and rates.

Dense Wave Division Multiplexer (DWDM)

A device that channels data from different sources together on an optical fiber, with each signal carried at the same time on its own separate light wavelength. DWDM systems typically supporter greater than 16 wave lenghts per fiber but may scale to 80 wavelengths or more.

EFIT

Equipment and engineering, furnish, install, and test (EFIT)

Ethernet

A link layer protocol (Layer 2) based on the suite of standards defined by the IEEE 802.3 committee.

Ethernet switch

A system that switches Ethernet frames based on medial access control (MAC) addresses and/or virtual local area networks (VLAN) IDs.

Facility-Based Carrier

A long-distance service provider that owns its own physical facilities.

Fixed Add-Drop Multiplexer (FOADM)

FOADMs are optical multiplexers based on simple static filters that permit add/drop of predefined wavelength traffic along fiber optidc networks.

Frame Relay (FR)

Frame Relay is a wide area network (WAN) protocol that operates at the physical and data link layers of the Open Systems Interconnection (OSI) reference model. Originally designed for use across Integrated Services Digital Network (ISDN) interfaces, frame relay puts data in a variable-size unit called a frame and leaves any necessary error correction (retransmission of data) up to the end-points. Based on older X.25 packet-switching technology designed for transmitting analog data (such as voice conversations), frame relay uses two packet techniques: a) variable-length packets and b) statistical multiplexing. Although generally reliable, the protocol does not guarantee data integrity and discards packets when there is network congestion.

Frame Relay Switch

Frame relay switches process and route data frames.

Free-Space Optical Transmission (FSO)

This technology transmits invisible, eye-safe light beams from one "telescope" to another using lasers in the infrared spectrum (700-1600 nm) where capacity can reach 10 gigabits per second (Gb/s). The light beam carries whatever optical transmission signal (layer 2 or MAC) and protocol framing a manufacturer chooses to support, typically SONET, ATM, 10/100/1000 Ethernet, or other voice, data, or video protocols.

Gateway GPRS Support Node (GGSN)

Organizes the inter-workings between the general packet radio services (GPRS) network and external packet switched networks to which the mobile systems may connect, including Internet and X.25 networks. The GGSN is a combination of a gateway, router, and firewall as it hides the internal network configuration from those outside. The GGSN receives data addressed to a specific user, checks if the user is active, and then forwards the data. In the opposite direction, the GGSN routes packet data from the mobile system to the destination network.

Gateway GPRS Support Node (GGSN)

The interface between the GPRS wireless data network and other networks such as the Internet or private networks.

High-bandwidth Microwave Backhaul

The use of wireless communications systems to send data from an end user to a node in a major network such as the Internet or an organization’s proprietary network usually at data rates of 200–300 Kbps and higher.

Host-based Firewall

Host-based firewalls reside on individual devices like desktop workstations or servers and are concerned with protecting only that particular computer. Host-based firewalls are also typically software-based rather than a hardware device, involving a firewall program that runs in the background while computer users work.

Hub

A communications infrastructure device to which nodes on a multi-point bus or loop are physically connected. Commonly used in Ethernet and Fiber Channel networks to improve the manageability of physical cables. Hubs maintain the logical loop topology of the network of which they are a part, while creating a "hub and spoke" physical star layout. Unlike switches, hubs do not aggregate bandwidth. Hubs typically support the addition or removal of nodes from the bus while it is operating.

Hybrid DWDM Transport-Optical Cross Connect System

A hybrid DWDM Transport and Optical Cross Connect System (e.g. Infinera).


In-Band

Refers to management channels and mechanism inherently provided by telecommunications elements to facilitate remote management and configuration. Examples of in-band management, include, but are not limited to, overhead bytes in physical layer containers such as SONET/SDH DCC, or OTN GCC, optical supervisory channel, or other facility provided by the equipment for management purposes.

Information Assurance Products

Devices (hardware and/or software) whose sole function is to provide network security such as firewall protection, intrusion detection systems, deep packet inspection, network or link encryptors, etc.

Information Technology (IT)

All aspects of information creation, access, use, storage, transport and management. The term 'information technology' addresses all aspects of computer and storage systems, networks, users and software in an enterprise.

Intelligent Optical Switch (IOS)

"Intelligent" refers to optical switches using dynamic routing and signaling software and protocols (e.g. GMPLS, G.ASON) to create and manage a flexible mesh infrastructure to deliver services in real time. These optical switches employ routing and management software to automate provisioning, routing, and restoration of light paths along with integrated SONET/SDH, OTN, and wavelength functions.

Intelligent Photonic Cross Connect System (PXC)

An intelligent photonic cross-connect is a switch that connects optical signals arriving at a location to other optical facilities (fibers) to enable optical signals to travel to various destinations. The photonic designation means that these are optical connections (no optical to electrical-to-optical (OEO) conversion takes place). The optical signals connected can be either individual wavelengths or the entire contents of a fiber facility, depending on the application or the type of switch. The "intelligent" designation indicates that the switch has knowledge of the facilities to which it is connected, and can make switching decisions based on that knowledge. Generally, this knowledge is obtained by communicating with other switches in the network via a control plane.

Inter-Exchange Carrier (IXCs)

Inter-exchange carriers provide inter-LATA service (basically, long-distance service). In some instances they co-locate equipment at LEC facilities and tap into the LECs switching equipment so that LEC customers can make long-distance calls across the IXCs network. All LECs must provide inter-exchange carriers with access locations called a point-of-presence (PoP).

Internet Protocol (IP)

A Layer 3 networking protocol first defined fully in RFC 791 and later refined in RFC 2460. The first RFC is IPV4 and the second is IPV6.

Layer 1

Open systems interconnect OSI physical layer, which defines communications characteristics such as property of the physical medium, data rates, modulation format, and coding and framing.

Legacy Dense Wave Division Multiplexing Systems

Older dense wave division multiplexing (DWDM) systems operating at less than or equal to 16 wave lengths that do not have reconfigurable add/drop capability, and that have no real traffic management capability (e.g.: those without switching or aggregation of end user traffic.) These systems were first deployed in the mid 1990s.

Link-Layer Transmission/Switching Aggregation Systems

Layer two, the second lowest layer in the Open Systems Interconnection (OSI) seven-layer model. The data link layer splits data into frames to transmit on the physical layer and receives acknowledgement frames. These systems (ATM, Ethernet, MPLS, Frame Relay, etc.) switch and aggregate traffic based on link-layer protocols/

Local Exchange Carrier (LEC)

Local exchange carrier (LEC) describes a public telephone company in the U.S. that provides local service. Local exchanges connect to other local exchanges within a local access and transport area (LATA) or to inter-exchange carriers (IXCs) such as long-distance carriers AT&T, CenturyLink, Sprint, and Verizon.

Local Area Network (LAN)

An information network connecting computers and devices in a home, business, school, office building (or cluster of closely positioned buildings) across a limited geographical area.

Local Tandem Switch

A high capacity backbone switch or core switch positioned in the physical core, or backbone, of a Public Switched Telephone Network (PSTN). This device interconnects edge switches, or Central Office (CO) switches. Local tandem switch ties two local central offices together.

Long Distance Tandem Switch

Long-distance tandem switch ties a central office or a local tandem switch to a long-distance network.

Long-Haul Dense Wave Division Multiplexing Terminal

A system that multiplexes more than one wavelength on to an optical fiber for transmission over a distance greater than or equalt to 250 kilometers.

Malware

Malicious software installed without permission that does harm to computer equipment, data repositories, and network information systems. Malware includes: viruses, worms, trojan horses, crimeware, logic bombs, backdoors, and spyware. Malware is not be confused with defective software – software intended for a legitimate purposes that contains errors or bugs.

Managed Services Provider

A network operator, or contractor, that optimizes the quality of services and delivering of application layer traffic (e.g., voice, data, video).

Metro Core

Metro core networks are required to efficiently aggregate multiple service types including legacy SONET/SDH and packet-based growth services in networks surrounding large metropolitan areas.

Microwave Transmission

Radio transmission using very short wavelengths with extremely high frequency bands.

Multiplexing

In data transmission, a function that permits two or more data sources to share a common transmission medium such that each data source has its own channel. Methods of multiplexing include time division multiplexing, and wavelength division multiplexing.

Multi-Protocol Label Switching (MPLS)

A means for switching data traffic using a label in the header of a variable length IP packet.

Multi-service provisioning platform (MSPP)

Transport technology known collectively as the multi-service provisioning platform (MSPP), which supports SONET/SDH and Ethernet over SONET services. TDM-based MSPPs replace traditional ADM metro area equipment.

Network Management Routers

Routers that exclusively support communications associated with the management of network operations.

Network Operations Center (NOC)

One or more locations from which control is exercised over a telecommunications, computer, or television broadcast network. NOCs monitor networks for alarms or certain conditions that may require special attention to avoid impact on the network's performance. For example, in a telecommunications environment, NOCs monitor for power failures, communication line alarms (such as bit errors, framing errors, line coding errors, and circuits down) and other performance issues.

Network Time Protocol (NTP)

A protocol for synchronizing the clocks of computer systems over packet-switched, variable-latency data networks. It is designed particularly to resist the effects of variable latency by using a jitter buffer.

Original Component Manufacturer (OCM)


A company that controls the design and manufacture of components used in information networks and that owns the associated intellectual property necessary to create the product and enable its functionality. OCMs typically sell their products directly to manufacturers or through licensed “authorized” distributors.

Original Equipment Manufacturer (OEM)

A company that controls the design and manufacture of hardware or software products used in information networks and owns the associated intellectual property necessary to create the product and enable its functionality. OEMs typically sell their products through formally “authorized” distributors.

Operational Support Systems (OSS)

Systems employed by carriers in managing the information networks, including supporting load monitoring, provisioning services, configuring network components, equipment surveillance, and managing faults. Services may include the capability to create, deploy, manage, maintain, and bill for telecommunications services. OSS may also encompass network hardware and software maintenance contracts and professional services applicable to the installation and operation of a customer’s infrastructure.

Optical Amplification/ Repeater System

A device that amplifies an input optical signal without converting it to electrical form. Alternatively, a repeater that regenerates the signal my converting in to the electrical domain.

Optical Cross Connect System (OXC)

An optical network element that grooms and switches incoming optical signals (greater than or equal to 50 megabits per second) to appropriate output ports. OXCs generally switch signals using Layer 1 protocols such as SONET, SDH, and OTN. OXCs can have optical or electrical switch matrices.

Optical Transport Network

Optical Transport Network (OTN) is an industry standard optical transport protocol defined by the ITU G.709 standard.

Packet Optical Transport System (P-OTS)

Also known as Packet Optical Network Platforms (PONPs)], this device combines three essential elements: a wave division multiplexer with a reconfigurable add-drop module (ROADM); a TDM interface to multiplex and groom traditional TDM traffic; and an Ethernet switching device. P-OTS may also support(OTN), IP/MPLS switching.

Packet-Switch

A device for routing data through a network by reading addresses in variable-sized packet headers or labels to determine their destination.

Point-of-Presence (POP)

A physical location, usually a building where the Inter-exchange Carrier system, that is interconnected with the Local Exchange Carrier Network.

Primary Reference Source (PRS)

Systems critical for synchronizing information networks. Typically these synchronizing devices are cesium-based clocks for Stratus 1 applications. Status 2 timing devices, which are slightly less precise, may be rubidium-based, or utilize global positioning satellites (GPS).

Reconfigurable Optical Add-Drop Multiplexer (ROADM)

Switching is enabled in these devices using an all-optical switch fabric that does not require optical-to-electrical or electrical-to-optical conversion. A ROADM system can support multiple DWDM transmission spans and client-level grooming.

Resilient Packet Rings (RPR)

A data link layer that utilizes dual, counter-rotating rings for fault tolerance in for carrier SONET and Ethernet networks. RPR, (a.k.a. IEEE 802.17) is similar to dynamic packet technology (DPT) and spatial re-use protocol (SPR) approaches to enhancing the efficiency of SONET/SDH multiplexers in transmitting packets on ring networks.

Router

A hardware and software system that directs data packets toward their intended destinations. Routers have various physical interfaces such as Ethernet, T1, E1, DS3, OC-3, etc. Routing is based upon the destination address contained within the header of the IP data packet.

Security Operations Center

The security operations center monitors activity and events in client environments to ensure that anomalous behavior is detected, identified, classified and acted upon where appropriate. Some carriers combine this function with their network operation centers.

Session Border Controllers (SBC)

Devices deployed in some voice over Internet protocol (VOIP) networks to control signaling and/or data flows used to establish, conduct, and terminate telephone calls or other interactive media communications. SBCs typically reside between two service provider networks in a peering environment; or between an access network and a backbone network to provide service to residential and/or enterprise customers.

Synchronous Digital Hierarchy (SDH)

An international standard for synchronous data transmission over fiber optic cables. SDH, as defined by the European Telecommunications Standards Institute (ETSI), specifies a standard rate of transmission at 155.52 Mega bits/s, STM-1. STM-1 is equivalent to SONET's Optical Carrier (OC) level-3.

Signal Transfer Point (STP)

A packet switching device that performs a message routing function in a common channel signaling (CCS) network. It receives, discriminates, and transfers CCS messages between the signaling points connected to it. STP devices can function in a network as separate network elements or as a part of a switch.

Synchronous Optical Networking (SONET)

SONET defines a standard rate of transmission at 51.84 Mega bits/s, STS-1. SONET is defined in Telcordia Technology’s Generic Requirements Document GR-253-CORE.

SONET Path Terminating Equipment

Path-Terminating Equipment (PTE) interfaces non-SONET equipment to the SONET network. At this layer, the payload is mapped and de-mapped into the SONET frame.

SONET/SDH/OTN Add-Drop Multiplexer

A device that enables data to enter and leave a SONET bit stream without having to de-multiplex the stream. An Add/Drop Multiplexer (ADM) is an example of Line-Terminating Equipment (LTE) that originates or terminates one or more sections of a line signal.

Switch

A network infrastructure component to which multiple nodes attach. Unlike hubs, switches typically have internal bandwidth that is a multiple of link bandwidth, and the ability to rapidly switch node connections from one to another. A typical switch can accommodate several simultaneous full duplex transmissions between different pairs of nodes. A switch filters, forwards and directs frames or circuits based on a destination address.

Tandem Switch

Switches that consolidate traffic, reduce trunk group requirements, and switch inter-office traffic. Also referred to as "local" and "access" tandems, these switches handle originating or terminating traffic between End Offices and the Inter-exchange Carrier’s Point-of-Termination. An Access Tandem is also used to distribute originating or terminating traffic between a CLEC end office and an intra-LATA toll point or an Inter-exchange Carrier’s Point of Termination.

Tier I

Another definition is that the service provider is considered Tier 1, if it does not pay any other provider for transit of its traffic across its backbone.

Time Division Multiplexing (TDM)

Time division multiplexing (TDM) was designed to delivery a steady stream of data, i.e., digitized voice. The data rate for each channel is exactly what is needed to carry a digitized voice-64Kbits/sec. TDM is a multiplexing technique that divides a circuit into multiple channels based on time. The technique is associated with telephone company voice services. T1 and T3 circuits are divided into multiple channels using time division multiplexing.

Satellite Ground Stations

A satellite ground station or earth station sends or receives data or messages to and from orbiting satellites. Stations conduct tele-communications with spacecraft and/or receive radio waves from astronomical radio sources. Earth stations communicate with space-craft by transmitting and receiving radio waves in the super high frequency or extremely high frequency bands (e.g., microwaves).

Satellite Teleport Stations

Permanent satellite uplink facilities built to maintain high quality communications with orbiting satellites, and consisting of a number of facilities for data transmission and reception via a satellite connection.

Satellite Transmission

Telecommunication activity using a downlink from a satellite down to one or more ground stations or receivers, and an uplink from a ground station up to a satellite.

Signaling Gateway

A device that enables connectivity between different signaling networks by resolving signaling differences between legacy switches and new network equipment (such as VoIP Gateways). Signaling Networks may use standardized signaling gateway protocols like SS7, ISDN, and other CAS or CCS based signaling protocols. The Signaling Gateway usually is installed between the legacy network signaling node and new network equipment such as a VoIP Gateway.

Transmission Control Protocol/Internet Protocol (TCP/IP)

A family of IP-based protocols which facilitate reliable transmission of data packets over various media in various circumstances. TCP/ IP provides the basis of the Internet and also of many subscriber services. Also, a set of protocols developed to link dissimilar computers across many kinds of networks.

Two-Factor Authentication

The employment of two means of identification as a security strategy to protect access to data, devices, or networks. Two-factor authentication may be invoked with a physical token, such as a card, and a separate security code, e.g. a password or personal identification number. Alternatively, it may rely on two separate codes.

Ultra Long-Haul Dense Wave Division Multiplexer

A DWDM system supporting unrepeated traffic over distances greater than 1,000 kilometers.

Undersea Cable Landing Stations

Termination point for underwater cable. Most often very close to cable landing point, but can be several miles distant. Often houses co-located facilities from various companies accessing the telecommunications or power transmitted over the underwater cable. Also known as cable termination station.

U.S.-Based

A company that is headquartered and incorporated in the United States, and whose ultimate parent company is headquartered and incorporated, or otherwise registered in the United States.

Virtual Local Area Network (VLAN)

Network hosts with a common requirements that communicate as if they were attached to the same broadcast domain, regardless of physical location. VLANs operate similarly to physical LANs, but permit end stations to be grouped together even if they are not located on the same network switch. Network reconfiguration can be done through software instead of physically relocating devices.

Virtual Private Networks (VPN)

A network that uses a public telecommunication infrastructure, such as the Internet, to service remote offices or individual users. VPN uses shared public infrastructure while maintaining privacy through security procedures, for example, by encrypting data at the sending end and decrypting it at the receiving end – sending the data through a "tunnel" that cannot be "entered" by data that is not properly encrypted. VPN can employ another level of security by encrypting the originating and receiving network addresses.

Voice over Internet Protocol (VOIP)

A group of transmission technologies for delivery of voice communications via the Internet or other packet-switched networks. . VOIP originates an Internet telephone call by converting an analog voice or facsimile signals to digital format and compressing/translating the signal into Internet protocol (IP) packets for transmission over the Internet; the process is reversed at the receiving end.

Wavelength Division Multiplexing (WDM)

A technique in fiber-optic transmission for using multiple light wavelengths (colors) to send data over the same medium. Two or more colors of light on one fiber. Simultaneous transmission of several signals in an optical waveguide at differing wavelengths.

Wavelength Division Multiplexer (WDM)

A passive optical device that combines light signals with different wavelengths on different fibers onto a single fiber.


Wholesale Transport Carrier

A telecommunications carrier that sells capacity to smaller communications companies and local carriers.


Section IV - b

Definitions – Wireless Network Systems

Term


Advanced Mobile Phone Service (AMPS)

Wireless Advanced Mobile Phone Service and digital AMPS (D-AMPS) connect the sender and receiver by radio waves and/or microwaves. A standard system for analog signal cellular telephone service in the United States and some other countries, AMPS allocates frequency ranges within the 800 and 900 Megahertz spectrum to cellular telephone. Bands are divided into 30 kHz sub-bands (channels). Spectrum division into sub-band channels occurs using frequency division multiple access (FDMA).

Authentication Center (AuC)

Associated with the HLR in a GSM or UMTS network. Provides authentication parameters for the authentication process.

Authentication Center (AC)

Provides authentication parameters for the authentication process in a CDMA network.

Code-Division Multiple Access (CDMA)

digital cellular network that utilizes spread-spectrum techniques where every channel uses the full available spectrum with individual conversations being encoded with a pseudo-random digital sequence, rather than by assigning a specific frequency to each user.

Base Station Controller (BSC) - CDMA

A network component that controls one or more Base Transceiver Stations.

Base Station Controller (BSC) - GSM

A network component that controls one or more Base Transceiver Stations.

Base Transceiver Station (BTS) – CDMA/EVDO

A base station is the actual transmitter and receiver in a CDMA/EVDO network.

Evolved Packet Core (EPC)

An all-Internet Protocol mobile core network for LTE (see 3GPP Release 8 standards) to enable provision of advanced real-time and media-rich services with enhanced Quality of Experience (QoE).. The EPC provides mobile core functionality that in previous mobile generations (2G, 3G) are realized through two separate sub-domains: circuit-switched (CS) for voice and packet-switched (PS) for data. The EPC separates of control and data planes and through a flattened IP architecture, which reduces the hierarchy

between mobile data elements.The EPC provides the key core elements of the LTE Core Network architecture. The EPC consists of the Mobility Management Engine (MME) which handles the mobility and IP connections between devices and the network and the SAE Gateway which provide the packet processing.

Gateway GPRS Support Node (GGSN)

Supports the edge routing function of the GPRS network. To external packet data networks the GGSN performs the task of an IP router. Firewall and filtering functionality, to protect the integrity of the GPRS core network, are also associated with the GGSN along with a billing function.

General Packet Radio Services (GPRS)

A packet-based wireless communication service with data rates from 56 up to 114 Kbps and continuous connection to the Internet for mobile phone and computer users. GPRS is based on Global System for Mobile (GSM) communication and complements existing services such circuit-switched cellular phone connections and the Short Message Service (SMS).

GPRS Support Node (GSN)

Combined SGSN and GGSN in a single network node which supports the use of packet data (2G and/or 3G) in a GSM core network

Global System for Mobile Communications (GSM)

A wireless digital cellular network. GSM employs both signaling and speech channels capable of eight simultaneous calls on the same radio frequency. This is achieved with the use of a combination of frequency division multiple access (FDMA) and time division multiple access (TDMA).

Home Location Register / Home Subscription Server (HLR/HSS)

A central database that contains details of each mobile phone subscriber authorized to use the GSM core network. Stores details of every SIM card issued by the mobile phone operator including information such as the electronic serial number, mobile identification number, current location, and service profile information. This database within the Home Public Land Mobile Network. Provides routing information for Mobile Terminated calls and SMS. Also responsible for the maintenance of user subscription information.

Home Public Land Mobile Network (HPLMN)

The Home Public Land Mobile Network identifies the PLMN (Public Land Mobile Network) in which the subscriber's profile is held. Users roaming to other networks will receive subscription information from the HPLMN.

IP Multimedia Subsystem (IMS)

Manages requests for services between the subscriber and the Application Server that provides the service



Media Gateway (MGW)

A translation device or service that converts digital media streams between disparate telecommunications networks such as

PSTN, SS7, Next Generation Networks (2G, 2.5G, 3G, and 4G radio access networks) or PBX. Media gateways enable multimedia communications across Next Generation Networks over multiple transport protocols such as Asynchronous Transfer Mode (ATM) and Internet Protocol (IP).

Mobility Management Engine (MME)

This device handles the mobility and IP connections between devices and the network and the SAE Gateway that provides packet processing.

Multimedia Messaging Service Center (MMSC)

Provides a store and forward facility for multimedia messages sent across a mobile network. Also provides formatting role to enable messages to be optimized for receiving handset's capability

Mobile Switching Center (MSC)

A switch or exchange that enables voice call processing in the wireless architecture. The MSC Server functionality enables a split between the control (signaling) and the user plane. The MSS and MGW makes it possible to cross-connect circuit switched calls switched by using IP, ATM, as well as TDM.

Mobile Switching Center Server (MSS)

The Server is a 3G core network element, which provides circuit-switched calling, mobility management, and GSM services to the mobile phones roaming within the area that it serves.

Node-B

The UMTS equivalent to the BTS (base transceiver station) description used in GSM. An enhanced Node-B (eNode-B) is the term used for a BTS in LTE systems. Note: BTS = GSM; Node-B = UMTS; eNode-B = LTE.

eNode-B

An enhanced Node-B (eNode-B) is the term used for a BTS in LTE systems. Note: BTS = GSM; Node-B = UMTS; eNode-B = LTE.

Packet Control Function (PCF)

Provides the control in Base Transceiver Stations for packet access in a CDMA network.

Packet Control Unit

Provides the control in Base Transceiver Stations for packet access in a GSM network.

Radio Network Controller (RNC)

A governing element in the UMTS radio access network (UTRAN) and is responsible for controlling the Node Bs that are connected to it. The RNC carries out radio resource management, some of the mobility management functions, and is the point where encryption is done before user data is sent to and from the mobile (or UE). The RNC connects to the Circuit Switched Core Network through Media Gateway (MGW) and to the SGSN (Serving GPRS Support Node) in the Packet Switched Core Network.

Service Control Function (SCF)

Intelligent Network node providing the control for IN based application in a wireless network.

Serving GPRS Support Node (SGSN)

Keeps track of the location of an individual Mobile Station and performs security functions and access control. Connects to RNC over the Iu-PS interface.

Short Message Service Center (SMSC)

To allow SMS messages to be sent. SMSC forwards the SMS to the indicated destination subscriber number.

Signalling Gateway (SG)

A network component responsible for transferring signaling messages (i.e. information related to call establishment, billing, location, short messages, address conversion, and other services) between Common Channel Signaling (CCS) nodes that communicate using different protocols and transports. Transport conversion is often from SS7 to IP.

Universal Mobile Switching Center (UMSC)

A combination of standard MSC voice call processing functionality and GSN packet switching in a single node.

Visitor Location Register (VLR)

Contains all subscriber data required for call handling and mobility management for mobile subscribers currently located in the area controlled by the VLR.

Wireless AMPS

Wireless Advanced Mobile Phone Service (AMPS) and digital AMPS (D-AMPS) connect the sender and receiver by radio waves and/or microwaves. A standard system for analog signal cellular telephone service in the United States and some other countries, AMPS allocates frequency ranges within the 800 and 900 Megahertz spectrum to cellular telephone. Bands are divided into 30 kHz sub-bands (channels). Spectrum division into sub-band channels occurs using frequency division multiple access (FDMA).

Universal Mobile Telecommunications System (UMTS)

A 3G mobile communication technology successor to GSM and GPRS. UMTS combines the W-CDMA, TD-CDMA, or TD-SCDMA air interfaces, GSM's Mobile Application Part (MAP) core, and the GSM family of speech codecs.




Section 1a CORPORATE RESPONSE Network Systems – Corporate Profile: Company Information

Company Name


Street Address – Corporate Headquarters



City


State


Zip Code


Website


Phone Number


Fax Number


Location of company’s Parent Company/Organization

Same as the above stated address?

Yes

No

If “No” – provide the address for your parent company in the space below.



Street Address


City


State


Zip Code


Country


Website


Phone Number


Fax Number



Primary point(s) of contact regarding this survey’s completion

Name(s)

Title

Phone

State

E-mail Address











Person(s) that have lead responsibility in your company for network operations, management, and maintenance.

Name(s)

Title

Phone

State

E-mail Address











BUSINESS CONFIDENTIAL – Per Section 705(d) of the Defense Production Act



Section 1b

Network Systems – Corporate Profile: Facility & Service Information

[Answer ALL questions – Surveys With Blank Responses Will Be Returned For Completion]


1. State your company’s total operating revenue for fiscal year 2009 (e.g. inputs of $12,000 = $12,000,000.00):


Comments:

2.a State the number of backbone/core-level information network facilities your company operates in the:


United States


U.S. Territories


Non-U.S. locations

2.b State the number of aggregation/metro core-level information network facilities your company operates in the:


United States


U.S. Territories


Non-U.S. locations

Comments:




4. Identify the types of data and telecommunications services that your company provides in the United States:

[Check all that apply]


Analog Telephony/Time Domain Multiplexing (TDM)


Video distribution


Cable TV


Voice Over Internet Protocol Telephony


Cellular


Internet


Wireless Internet


Microwave transmission


Virtual Private Networks


Satellite transmission


Data Centers


Optical transmission


Other

Comments:

5. My company:


[Check all that apply]


Owns and manages its own network operation centers (NOCs) for company-owned network infrastructure located in the United States


Relies on contractor organizations to provide network operation center (NOC) services for company-owned network infrastructure in the United States


Both


Owns and manages its own network operation centers (NOCs) for company-owned network infrastructure outside of the United States


Relies on contractor organizations to provide network operation center (NOC) services for company-owned network infrastructure outside of the United States


Both

Comment:

BUSINESS CONFIDENTIAL – Per Section 705(d) of the Defense Production Act

3. Identify the types of information network facilities that your company operates in the United States


[Check all that apply]


Long-haul transport networks


Undersea cable landing stations


Internet peering, co-location, gateway


Satellite Ground Stations


Telephony peering, co-location, gateway


Other





Comments:


Section 1b – continued

Network Systems – Corporate Profile: Facility & Service Information - continued

[Answer ALL questions – Surveys With Blank Responses Will Be Returned For Completion]


6. State the locations of all company network operation centers (NOCs) in the United States; and provide the manager’s name, phone number, and e-mail address.

Operating Center Name

Address

State

Zip Code

Country

Manager’s Name

Phone Number

E-mail Address

Drop-Down Forms
























Comments:

7. State the locations of all company network operation centers (NOCs) in Non-U.S. locations; and provide the manager’s name, phone number, and e-mail address.

Operations Center Name

Address

State

Zip Code

Country

Manager’s Name

Phone Number

E-mail Address

Drop-Down Forms
























Comments:

8. Identify the Names and contact information of all third-party organizations that provide network operation center (NOC) management services to your company.

NOC Service Provider(s)

Address

State

Zip Code

Country

Manager’s Name

Phone Number

E-Mail Address

Drop-Down Forms
















Operations Center Names

Address

State

Zip Code

Country

Manager’s Name

Phone Number

E-Mail Address

Drop-Down Forms
















9. Identify all locations of the third-party network operation centers (NOCs) used to manage any segment of your company’s network infrastructure in U.S. and Non-U.S. locations.

NOC Service Provider(s)

Address

State

Zip Code

Country

Manager’s Name

Phone Number

E-Mail Address

Drop-Down Forms
















Operations Center Names

Address

State

Zip Code

Country

Manager’s Name

Phone Number

E-Mail Address

Drop-Down Forms
















Comments:

BUSINESS CONFIDENTIAL – Per Section 705(d) of the Defense Production Act



Section 1b – continued

Network Systems – Corporate Profile: Facility & Service Information - continued

[Answer ALL questions – Surveys With Blank Responses Will Be Returned For Completion]


10. My company:


[Check all that apply]


Owns and manages its own security operations centers (SOCs) for company-owned network infrastructure located in the United States


Relies on contractor organizations to provide security operations center (SOC) services for company-owned network infrastructure located in the United States


Co-locates its SOC operations with its NOC facilities in the United States.


Owns and manages its own security operations centers (SOCs) for company-owned network infrastructure outside of the United States


Relies on contractor organizations to provide security operations center (SOC) services for company-owned network infrastructure outside of the United States


Co-locates its SOC operations with its NOC facilities in Non-U.S. locations.

Comment:

11. State the locations of all company security operations centers (SOCs) in the United States; and provide the manager’s name and phone number.

Operations Center Name

Address

State

Zip Code

Country

Manager’s Name

Phone Number

E-Mail Address

Drop-Down Forms
























Comments:

12. State the locations of all company security operations centers (SOCs) in Non-U.S. locations; and provide the manager’s name and phone number.

Operations Center Name

Address

State

Zip Code

Country

Manager’s Name

Phone Number

E-Mail Address

Drop-Down Forms
















Comments:

13. Identify the names of all third-party organizations that provide security operations center (SOC) management services to your company.

SOC Service Provider(s)

Address

State

Zip Code

Country

Manager’s Name

Phone Number

E-Mail Address

Drop-Down Forms
















Operations Center Names

Address

State

Zip Code

Country

Manager’s Name

Phone Number

E-Mail Address

Drop-Down Forms
















14. Identify all locations of the third-party security operations centers (SOCs) used to manage any segment of your company’s network infrastructure in U.S. and Non-U.S. locations.

SOC Service Provider(s)

Address

State

Zip Code

Country

Manager’s Name

Phone Number

E-Mail Address

Drop-Down Forms
















Operations Center Names

Address

State

Zip Code

Country

Manager’s Name

Phone Number

E-Mail Address

Drop-Down Forms
















Comments:

BUSINESS CONFIDENTIAL – Per Section 705(d) of the Defense Production Act

Section 1c

Network Systems – Corporate Profile: Business & Operational Practices

[Answer ALL questions – Surveys With Blank Responses Will Be Returned For Completion]


1a. Identify how your data network operations centers (NOCs) are protected from cyber attack:

[Check all that apply]


Host-Based Protections


Perimeter Protections


False Hosts ("Honey pots")


- Malware Scanning/Detection (Anti-Virus/Anti-Spyware, etc.)


- Network Firewalls


Network Encryption


- Host-Based Intrusion

Prevention System


- Network Intrusion/ Anomaly

Detection Tools


Security Info and Event Managment (SIEM)


- Host-Based Firewall


- Network Flow/Packet

Collection


Other [Explain in Space provided]


- Root kit Detection Capability


- De-Militarized Zones

(DMZs)


Other [Explain in Space provided]

1b. Identify the detection and analysis techniques that your company uses to understand attacks/threats to your data network operations centers (NOCs):

[Check all that apply]


Host Forensics


Network Event Forensics


Real-time Traffic Analysis


Host Configuration Management


Network Configuration Management


Policy management


Other [Explain in Space provided]

Comments:

2. Data management and network management occurs: [Check]


In-band?


Through a separate physical network


Through a separate virtual private network (VPN)


Other [Explain in Space provided]

Comments:

3. Identify how network and data managers remotely manage systems/networks: [Check all that apply]


Remote connection via Internet


Internal network

connection


No remote access



Remote External Virtual Private Network (VPN)


Internet



Comments:

BUSINESS CONFIDENTIAL – Per Section 705(d) of the Defense Production Act


Section 1c – continued

Network Systems – Corporate Profile: Business & Operational Practices - continued

[Answer ALL questions – Surveys With Blank Responses Will Be Returned For Completion]


4.a Do you permit third-party organizations to operate within your management network and/or data management networks – and to report out of your networks for activities to: [Check]

Collect data on traffic

(e.g. network-wide traffic, routing traffic, subscriber usage, and application traffic)

Yes

No

Monitor security threats

Yes

No

Other

[Explain in Space provided]

Yes

No









If you responded “Yes” to any of the question responses above, identify all such third-party organizations that operate within your network. Specify the nature of their activities, and provide a point of contact and phone number. Survey participants responding "No" to all of the three above responses in this question, proceed to Question 4.c.

Organization Name:

Nature of In-Network Activity:

Headquarters Location - Country

Organization Contact Name:

Phone Number:

E-Mail Address

Drop-Down Forms


Drop-Down Forms



Drop-Down Forms

Comments:

4.b Do the third-party organizations that you permit to operate within your network and/or data management networks do so

from:


[Check all that apply]


Facilities located in the United States that your company owns and controls.


Facilities located outside of the United States that your company owns and controls.


Facilities located in the United States that they control.


Facilities located outside of the United States that they control


Do not know the countries from which approved third-party organizations operate on my network.


Other [Please explain in space below]


If you responded “Yes” to any of the question responses above, identify all such third-party organizations that operate within your network. Specify the nature of their activities, and provide a point of contact and phone number. Survey participants responding "No" to all of the three above responses in this question, proceed to Question 5.

4.c Does your company perform testing and validation of software upgrades, patches, and updates on network equipment prior to deployment in your systems? [Check]


Yes


No

If you responded “Yes” to this question, respond to Questions 4.d and 4.e. Survey participants responding "No" to this question should proceed to Question 5.

4.d State the types of tests performed on the software in our equipment laboratory or test environment.

[Check all that apply]


Validate system performance and features


Test system reliability


Verify system interoperability


Analyze impact on security


Other [Please explain in space below]


Other [Please explain in space below]

Comments:

4.e State the types of procedures that your company follows to ensure the integrity of the software installed in your network systems.

[Check all that apply]


Verify digital certificates and code signatures


Request and analyze source code


Scan software for viruses and malware


Perform other analyses or procedures

[Please explain in space below]

Comments:

BUSINESS CONFIDENTIAL – Per Section 705(d) of the Defense Production Act





Section 1c – continued

Network Systems – Corporate Profile: Business & Operational Practices - continued

[Answer ALL questions – Surveys With Blank Responses Will Be Returned For Completion]


5a. Identify all Communications Assistance for Law Enforcement Act (CALEA) compliance equipment vendors that you company uses:

Name

Type of Equipment

Type of Software


Drop-Down Forms


Drop-Down Forms


5b. Identify all support companies that you company employs to assure compliance with CALEA requirements:

Name of Company

Type of Service Provided

Frequency of Service (Check)

Drop-Down Forms



Daily


Weekly


Monthly


Continuously


Comments:

6.a State the number of Data Centers that your company operates:


Within the United States


Outside of the United States

Comments:


6.b Identify the locations of the Data Centers that your company owns and/or operates in the United States and outside of the United States; and provide the manager’s name and phone number.

Operations Center Name

Address

State

Zip Code

Country

Manager’s Name

Phone Number

E-Mail Address

Drop-Down Forms
















Comments:

7. Identify all organizations that operate Data Centers on behalf of your company to support its network operations; and provide the manager’s name and phone number.

Operations Center Name

Address

State

Zip Code

Country

Manager’s Name

Phone Number

E-Mail Address

Drop-Down Forms
















Comments:

8. Does your company lease network equipment from:

[Check all that apply]

Manufacturers

MFG’s Authorized Distributors

Third-Party Suppliers


Yes


No


Yes


No


Yes


No

If the answer is “No” for all choices – proceed to Question 14. If the answer is “Yes” – complete Questions 9 - 13b.

Comments:

BUSINESS CONFIDENTIAL – Per Section 705(d) of the Defense Production Act


Section 1c – continued

Network Systems – Corporate Profile: Business & Operational Practices - continued

[Answer ALL questions – Surveys With Blank Responses Will Be Returned For Completion]


9. State the typical duration of the network equipment lease:


1 - 3 years


3 – 5 years


5-7 years


7-10 years


10 years or longer

Comments:

10. Do the terms of the lease stipulate that:

[Check all that apply]


Your company maintains the network equipment


The manufacturer maintains the network equipment


The manufacturer’s designated contractor maintains the network equipment


Other (Describe in space below)

Comments:


11. Can ownership of the Equipment Lease be transferred by the lessor to another company or organization?


Yes


No

12. Can ownership of the Equipment subject to the lease be transferred to another company or organization?


Yes


No

Comments:

13a. State the percent of your backbone/core U.S. facilities that use leased equipment from:

U.S.-based suppliers

%

13b. State the percent of your U.S. metropolitan area core facilities that use leased equipment from:

U.S.-based suppliers

%

Non-U.S.-based suppliers

%

Non-U.S.-based suppliers

%

Comments:


14. State the percent of decisions for procure-ment of network equipment that are made by:

[Check all that apply]

%

Corporate-Level Company network operations staff

%

Contractor(s) support-ing corporate network operations staff

%

Contractor(s) operating corporate network operating systems

%

Other

(Describe in space below)

15. State the percent of decisions for procure-ment of information security products made by: [Check all that apply]

%

Corporate-Level Company network operations staff

%

Contractor(s) support-ing company network operations staff

%

Contractor(s) operating company network systems

%

Other (Describe in space below)

Comments:

BUSINESS CONFIDENTIAL – Per Section 705(d) of the Defense Production Act



Section 1d

Network Systems – Corporate Profile: Equipment & Software Procurement

[Answer ALL questions – Surveys With Blank Responses Will Be Returned For Completion]


1. When first equipping a network facility, or performing a major change-out of network systems, my company/

organization:


[Check all that apply]


- buys parts and systems directly from OEM/OCM manufacturers


- buys parts and systems through OEM/OCM authorized distributors


- buys parts and systems through known 3rd party vendors


- buys used equipment, parts and systems from third-parties, auction sites, etc.


- provides a project contractor with instructions on systems and parts to purchase


- buys turn-key systems through a contractor and does not specify system component

brands, or model types – just specifies overall performance requirements


- leases equipment

Comments:


2. My company/organization purchases spare or replacement routers, line cards and chassis, switches, multiplexers, and other data handling equipment:

[Check all that apply]


- directly from OEM/OCM manufacturers


- directly from OEM/OCM authorized distributors


- through known domestic 3rd party, new-part vendors


- through known non-U.S., 3rd party, new-part vendors


- through a U.S.-based contractor that maintains systems at this facility


- through a Non-U.S. contractor that maintains systems at this facility


- through a used-part vendor


- Other [please explain in space below]

Comments:


3.a As a condition of purchase, does your company require equipment manufacturers and their authorized distributors to disclose the original developers (including subcontractors) of software that enables the operation of acquired equipment currently deployed in your network systems?


Yes


No

3.b Identify the written requirements your company stipulates when buying systems or components from third-party vendors and/or maintenance contractors:

[Check all that apply]


- documentation to establish product authenticity, pedigree, and chain of custody?


- disclosure how the supplier acquired the product (e.g. manufacturer’s product closeout,

contract manufacturer surplus, independent distributor, broker, Internet purchase, etc.?


- declaration of whether the product is “new” or “used”?


- disclosure of whether the product will be shipped directly from the vendor’s warehouse?


- disclosure when the product ordered is being fulfilled and delivered by another party via

drop-shipment to your company’s designated point of delivery?


- pre-sale identification of the product brand name and manufacturer?

Comments:

4. Does your company have written procedures and guidance for its engineering and facility operations personnel to follow to assure that electronic systems installed, and maintained in this facility are:


[Check “Yes” or “No”]

Genuine (OCM/OEM)

Yes

No



Have not been subject to tampering



Comments:

BUSINESS CONFIDENTIAL – Per Section 705(d) of the Defense Production Act


Section 1d – continued

Network Systems – Corporate Profile: Equipment & Software Procurement

[Answer ALL questions – Surveys With Blank Responses Will Be Returned For Completion]



5. State the steps your company/organization takes to verify that network parts/systems that are acquired for its facilities are genuine OEM/OCM product:


[Check all that apply]


- Verifies that documentation for products delivered for installation in this facility are genuine



- Confirms that model numbers, serial numbers, lot number, dates of manufacture, place of manufacture, etc., are valid



- Tests systems and components delivered to this facility



- Other


Comments:


6. Identify the due diligence steps that your company performs in selecting carrier information network equipment prior to its purchase and installation in facilities in the United States and in U.S. territories:


[Check all that apply]


Evaluates hardware and software for vulnerability to denial-of-service attacks.


Checks on the manufacturer’s ties to foreign governments, and business espionage


Consults National Security Agency



Tests equipment to assure that data transfers can not be intercepted or redirected


Consults U.S. Computer Emergency Readiness Team – Dept. of Homeland Security


Consults the National Institute of Standards & Technology/ U.S. Dept. of Commerce



Tests enabling software to assure data transmission security


Consults the Computer Crime and Intellectual Property Section (CCIPS), Criminal Division, at the Dept. of Justice


Other (Describe in space below)



Do not know what organization to contact



Consults the Federal Communications Commission


Consults Federal Bureau of Investigation


None


Comments:


7. State the duration that your company retains records of tests performed to evaluate equipment prior to purchase and installation in individual facilities: [Check]


3 months


6 months


1 year



3 years


5+ years


Do not retain


Comments:


8. For equipment installed in your company’s facilities over the last three years, identify and rank your typical operational practices - on percentage (%) basis:

(Totals should not exceed 100%)


%

No OEM/vendor support after purchase except for warranty claims

%

Limited vendor support after purchase, usually without involving the manufacturer


%

Substantial customization of equipment and engineering, furnish, install, and test (EFIT) activity - but limited post-start-up support

%

Substantial customization and EFIT with continuous vendor engagement for the lifecycle of the equipment


%

Managed hosted-services with the vendor providing service products to the carrier and operating those products for the carrier

%

Other (Describe in space below)



Comments:


BUSINESS CONFIDENTIAL – Per Section 705(d) of the Defense Production Act




Section 1d – continued

Network Systems – Corporate Profile: Equipment & Software Procurement

[Answer ALL questions – Surveys With Blank Responses Will Be Returned For Completion]


9. Rank the five most important determining factors in your company/organization’s selection of network system equipment:

Types of Network Systems

Factors Driving Equipment Purchase Decisions

[Select only five]

Availability/

Delivery Schedule

Availability of Turn-Key System Packages

Average Meantime to Failure

Brand Name

Quality of Maintenance/

Service Support

Country of Manufacture

Availability and Quality of Financing Packages

Performance

Price

Legal liability

Reliability

Security of System Hardware /Software

Optical/ Transmission and Layer 1


Ultra Long-Haul DWDM1

Drop-Down Boxes






Drop-Down Boxes





Drop-Down Boxes

Terrestrial Long-Haul Dense Wave Division Multiplexer Terminal2














Undersea Long-Haul Dense Wave Division Multiplexer Terminal [define]













Metropolitan Area Dense Wave Division Multiplexer Terminal [define]













Coarse Wave Division Multiplexer

(CWDM) [Minimum wavelength spacing > 5 nm]













Reconfigurable optical Add-Drop multiplexer (ROADM)













Hybrid DWDM Transport and Optical Cross Connect System (e.g., Infinera)













Intelligent Photonic Cross Connect (PXC)













Automated Optical Patch Panel














Optical Cross-Connect System (OXC)













SONET/SDH/OTN Add-Drop Multiplexer [Electrically grooms SONET/SDH/OTN channels]













Packet Optical Transport System (P-OTS)4













Multi-Service Provisioning Platform (MSPP)













Free-space Optical Transmission

[link capacity >= 1 gigabit per second]













Microwave Transmission

[link capacity >= 622 megabits per second]













Comments:

BUSINESS CONFIDENTIAL – Per Section 705(d) of the Defense Production Act



Section 1d - continued

Network Systems – Corporate Profile: Equipment & Software Procurement

[Answer ALL questions – Surveys With Blank Responses Will Be Returned For Completion]


10. Please rank the brands of network equipment that your company finds most competitive -- by type of network device.

Type of Device

Device Manufacturers

Optical/ Transmission and Layer 1

Switching, Grooming, Aggregation


Choice # 1


Choice #2


Choice #3


Choice #4

Ultra Long-Haul Dense Wave Division Multiplexer (DWDM) Terminal1


Drop-Down Boxes


Drop-Down Boxes


Drop-Down Boxes


Drop-Down Boxes

Terrestrial Long-Haul Dense Wave Division Multiplexer Terminal2










Undersea Long-Haul Dense Wave Division Multiplexer Terminal









Metropolitan Area Dense Wave Division Multiplexer Terminal









Coarse Wave Division Multiplexer

[Minimum wavelength spacing > 5 nm]









Reconfigurable optical Add-Drop multiplexer (ROADM)









Hybrid DWDM Transport and Optical Cross Connect System









Intelligent Photonic Cross Connect (PXC)









Automated Optical Patch Panel









Optical Cross-Connect System (OXC)









SONET/SDH/OTN Add-Drop Multiplexer [Electrically grooms SONET/SDH/OTN channels]









Packet Optical Transport System (P-OTS)3









Multi-Service Provisioning Platform (MSPP)










Free-space Optical Transmission (FSO)

[link capacity >= 1 gigabit per second]









Microwave Transmission

[link capacity >= 622 mega bits per second]









1 Transmission capability of greater than 1,000 kilometers; maximum capacity of more than 8 wavelengths.

2 Maximum reach with optical amplification is 250 to 1,000 kilometers; maximum capacity of more than 8 wavelengths.

3 Combines DWDM transmission, grooming, and switching with Layer 2 Carrier Ethernet and MPLS capabilities. Supports one or more packet layer protocols.


Comments:

BUSINESS CONFIDENTIAL – Per Section 705(d) of the Defense Production Act


Section 1d - continued

Network Systems – Corporate Profile: Equipment & Software Procurement

[Answer ALL questions – Surveys With Blank Responses Will Be Returned For Completion]


10. – continued Please rank the brands of network equipment that your company finds most competitive -- by type of network device.

Type of Device

Device Manufacturers

Link-Layer Transmission/Switching/ Aggregation Systems


Choice # 1


Choice #2


Choice #3


Choice #4

Asynchronous Transfer Mode (ATM) Core Switch [Total switching capacity >= 10 gigabits per second]


Drop-Down Boxes


Drop-Down Boxes


Drop-Down Boxes


Drop-Down Boxes

Frame Relay Switch [Total switching capacity >= 10 gigabits per second]









Carrier Ethernet Services Router [Supports ethernet services, e.g., E-Line, E-LAN, E-Tree]









Resilient Packet Ring (RPR) [Or, equivalent technology]









Core Ethernet Aggregation and Switching










Other Link-Layer Transmission/Switching/ Aggregation Systems

[Describe optical systems not listed that groom/switch/transport traffic at > 10 gigabits per second.]









Comments:

Network Routing Systems










Core Internet Protocol (IP)/ Multi-Protocol Label Switching (MPLS)

[Aggregate capacity >= 10 gigabits per second ]


Drop-Down Boxes


Drop-Down Boxes


Drop-Down Boxes


Drop-Down Boxes

Other Network Routing Systems

[Describe optical systems not listed that groom/switch/transport traffic at > 10 gigabits per second.]









Comments:









Telephony Systems










Class 5 Telephony Switch



Drop-Down Boxes


Drop-Down Boxes


Drop-Down Boxes


Drop-Down Boxes

Tandem Switch










Signal Transfer Point (STP)










Primary Reference Source (PRS) – Stratum 1 (Cesium-based)









Primary Reference Source (PRS) – Stratum 2 (Rubidium-, GPS-assisted)









Comments:


BUSINESS CONFIDENTIAL – Per Section 705(d) of the Defense Production Act



FOR USG REVIEW – Incomplete Universe of Device Manufacturers To Appear in Drop-Down Boxes

Actelis Networks, Inc.)

Brocade

Exfo

Juniper

Obsidian Strategics


Acterna

BTI

Extreme Networks

Lantern Communications

Ocean Optics

Tekelec

Adtran

Cable-Free Solutions

Fluke

Laurel Networks

Oclaro

Telco Systems

ADVA AG Optical Networking

Canobeam (Canon)

Force 10

LightPointe

OpVista

Tellabs

Advanced Fiber Solutions

Catena Networks (Ciena)

fsona

Lucent Technologies

Orcave

Tellium

Agilent

CBL

Fujitsu

LuxN

Overture Networks

Oki Electric Industry Co.

AirFiber

Check Point

General Bandwidth

Luxterra

Packeteer

Telco Systems

Alcatel

Ciena

GlimmerGlass

Marben Products

PAV Communications


Alcatel-Lucent

Ciena-Nortel

Guillin

Mahi Networks

Perkin Elmer

Terabeam

ANDA

Cisco

Harris

Marconi

Plaintree Systems


Anue

Callient

Hatteras

Meta-Switch

Proxim

Toshiba

Altera

Cramer

Hillstone


RAD Data

Transmode

Anite

Corrigent

Hitachi

Metro Ethernet Networks (now Nortel)

Riverstone Networks


Appian Communications

Corvis

Hewlett-Packard (HP)

Mitsubishi Electric Corp.

Samsung


Avago

CXR Larus

Huawei

Mostcom

Seikoh Giken

Tropic Networks

Avanex

Cyan Optics

IBM




Avaya

Cyras

Ideal

Motorola

Siemens AG

Tyco

Aviat (formerly Harris Stratex)

Dell

IPITEK

Movaz

Sorrento Networks, Inc.

Vello Systems

Avici

Dows Lake Microsystems

Infinera

MRV Communications

Sumitomo

Xtera

Avvio Networks

Dune Networks (now Broadcom)

Ixia (formerly Agilent)

NEC

Sun Microsystems

Zhone Technologies, Inc.

Bay Microsystems

ECI Telecom

JDSU Uniphase

Netcore

Sycamore

ZTE

Bookham

Enablence Technologies, Inc.


Nokia


Other

Broadcom

Engage Communications

LSA Photonics

Nokia-Siemens




Ericsson


Nortel

Tecore





Noyes

Tejas Networks

Comtech Telecommunications Corp

Comments:

BUSINESS CONFIDENTIAL – Per Section 705(d) of the Defense Production Act



Section 1d continued

Network Systems – Corporate Profile: Equipment & Software Procurement

[Answer ALL questions – Surveys With Blank Responses Will Be Returned For Completion]


10. – continued Rank the five most important determining factors in your company/organization’s selection of network system equipment:

Types of Network Systems


Drop-Down Boxes

Factors Driving Equipment Purchase Decisions

[Select only five]

Availability/

Delivery Schedule

Availability of Turn-Key System Packages

Average Meantime to Failure

Brand Name

Quality of Maintenance/

Service Support

Country of Manufacture

Availability and Quality of Financing Packages

Performance

Price

Reliability

Legal Liability

Security of System Hardware /Software

Link-Layer Transmission/Switching/ Aggregation Systems

Asynchronous Transfer Mode (ATM) Core Switch [Total switching capacity >= 10 gigabits per second]













Frame Relay Switch [Total switching capacity >= 10 gigabits per second]













Carrier Ethernet Services Router [Supports ethernet services, e.g., E-Line, E-LAN, E-Tree]













Resilient Packet Ring (RPR) [Or, equivalent technology]













Core Ethernet Aggregation and Switching














Other [Describe optical systems not listed that groom/switch/transport traffic at > 10 gigabits per second.]













Network Routing Systems














Core Internet Protocol (IP)/ Multi-Protocol Label Switching (MPLS)













Other [Describe optical systems not listed that groom/switch/transport traffic at > 10 gigabits per second.]













Telephony Systems














Class 5 Telephony Switch













Tandem Switch














Signal Transfer Point (STP)














Primary Reference Source (PRS) – Stratum 1 (Cesium-based)













Primary Reference Source (PRS) – Stratum 2 (Rubidium-, GPS-assisted)













Comments:

BUSINESS CONFIDENTIAL – Per Section 705(d) of the Defense Production Act


Section 1e

Network Systems – Corporate Profile: Equipment Acquisition Finance

[Answer ALL questions – Surveys With Blank Responses Will Be Returned For Completion]


1. Name the Five manufacturers of network equipment that you perceive as offering the steepest discounts on their products.

Brand #1

Brand #2

Brand #3

Brand #4

Brand #5

Drop-Down List

Drop-Down List


Drop-Down List

Drop-Down List

2. Identify the Top Five network equipment manufacturers that you perceive as offering the lowest network equipment prices prior to discounting.

Drop-Down List

Drop-Down List


Drop-Down List

Drop-Down List

Comment:

3. For each mode of financing, identify three network equipment manufacturers that you perceive as offering the most competitive price/financing packages:

No-Money Down” financing

Pay-As-You-Go financing


Drop-Down List



Drop-Down List


Earnings-linked financing

Free Equipment


Drop-Down List



Drop-Down List


Leases with Purchase Options

Long-Term Equipment Trials


Drop-Down List



Drop-Down List


Rebates

Post-Sale Refunds of Part of Purchase Price


Drop-Down List



Drop-Down List


4. Identify three equipment manufacturers that you perceive as directly offering, or otherwise arranging, the lowest-cost financing packages.

Drop-Down List

Drop-Down List

Drop-Down List

Comment:

5. Identify system vendors that request any of the following types of information regarding your network operations as a condition of an equipment bid, sale or lease:

[Check all that apply]

Equipment Physical Location

Network Topology

Fiber plant/conduit locations/layouts

Physical access procedures to enter buildings

Customers served by vendor’s equipment

Information on other equipment connected to vendor’s systems

Drop-Down List


Drop-Down List



Drop-Down List

6. Identify system vendors that request any of the following types of information regarding your network operations as a condition for implementing a maintenance service contract: [Check all that apply]

Equipment Physical Location

Network Topology

Fiber plant/conduit locations/layouts

Physical access procedures to enter buildings

Customers served by vendor’s equipment

Information on other equipment connected to vendor’s systems

Drop-Down List


Drop-Down List



Drop-Down List

BUSINESS CONFIDENTIAL – Per Section 705(d) of the Defense Production Act


Section 1e - continued

Network Systems – Corporate Profile: Equipment Acquisition Finance

[Answer ALL questions – Surveys With Blank Responses Will Be Returned For Completion]


7. Identify the activities that you currently permit system vendors to perform in your network facilities:

[Check all that apply]


On-site Equipment Installation


On-site Equipment Maintenance


On-site Equipment Upgrades


Remotely Access Network Equipment


Provisioning and Configuration


Remote Management


Other


Other

Comments:

8.a Identify manufacturers that, as a condition of providing a loan package or other discounts for your equipment purchase, stipulate that their designated service personnel must perform the following functions:

[Check all that apply]


On-site Equipment Installation

On-site Equipment Maintenance

On-site Equipment Upgrades

Remotely Access Network Equipment

Drop-Down List



Drop-Down List

Provisioning and Configuration

Remote Management

Other

Other

Drop-Down List



Drop-Down List

Comments:

8.b Identify network equipment leasing companies that, as a condition of providing a loan package or other discounts for your equipment purchase, stipulate that their designated service personnel must perform the following functions at your facilities, or other facility access:

[Check all that apply]


On-site Equipment Installation

On-site Equipment Maintenance

On-site Equipment Upgrades

Remotely Access Network Equipment

Drop-Down List



Drop-Down List

Provisioning and Configuration

Remote Management

Other

Other

Drop-Down List



Drop-Down List

Comments:

9. Identify equipment suppliers that are offering to arrange for the engineering and construction of your company network infrastructure in the United States:

Comments:


10. Identify equipment suppliers that are offering to arrange for the engineering and construction of your company’s network infrastructure in Non-U.S. locations:


Comments:


BUSINESS CONFIDENTIAL – Per Section 705(d) of the Defense Production Act



Section 1f

Network Systems – Corporate Profile: Current Types of Installed Equipment – Wireless Networks

[Answer ALL questions – Surveys With Blank Responses Will Be Returned For Completion]


1. For each type of network system listed in the left-hand column, identify the three most prevalent brands currently installed in your wireless networks; 2) state number of rack units installed for each manufacturer; and 3) estimate the remaining service life.

Wireless Network Devices –


#1 Brand/

Manufacturer

Quantity Installed [Rack Units]

#2 Brand/

Manufacturer

Quantity Installed

[Rack Units]

#3 Brand/

Manufacturer

Quantity Installed

[Rack Units]

Expected Replacement

Year(s)

Radio Access Network

Drop-Down Lists


Drop-Down Lists


Drop-Down Lists


Brand

#1

#2

#3

Base Station Controller - CDMA (BSC)










Base Station Controller - GSM (BSC)










Base Transceiver Station - CDMA/EVDO (BTS)










Base Transceiver Station - GSM (BTS)










Femto Gateway










Node B [3G]










eNodeB [4G - LTE]










Packet Control Function (PCF)










Packet Control Unit (PCU)










Radio Network Controller (RNC)










Wireless Access Points for WiFi










Wireless Access Points for WiMAX










Wireless Core










Authentication Center (AC)










Authentication Center (AuC)










Evolved Packet Core (EPC)










Gateway GPRS Support Node (GGSN)










GPRS Support Node (GSN)










Home Subscriber Server (HSS)/Home Location Register (HLR)










Internet Protocol Multimedia Subsystem (IMS)










Media Gateway










Mobile Switching Center (MSC)










Multimedia Message Service Center (MMSC)










Media Server










Proxy-Call Session Control Function (P-CSCF)










Service Control Function (SCF)










Serving GPRS Support Node (SGSN)










Session Border Controller (SBC)










Short Message Service Center (SMSC)










Signaling Gateway [SS7 Circuit Switching]










Signal Transfer Gateway?? [Internet Protocol]










Visitor Location Register (VLR)










Universal Mobile Switching Center (UMSC)










Comments:

BUSINESS CONFIDENTIAL – Per Section 705(d) of the Defense Production Act


Section 1f - continued

Network Systems – Facility Profile: Recently Installed Equipment - Wireless

[Answer ALL questions – Surveys With Blank Responses Will Be Returned For Completion]


2. Starting with the most recent equipment purchase agreements and working backwards, 1) identify by system type the wireless equipment brands purchased, or slated for purchase, from January 2008 through June 2011 for installation in your wireless network facilities; 2) state the number of rack units installed, or slated to be installed; and 3) estimate the service lifetime (in years).

Wireless Network Devices


#1 Brand/

Manufacturer

Quantity Installed

[Rack Units]

#2 Brand/

Manufacturer

Quantity Installed

[Rack Units]

#3 Brand/

Manufacturer

Quantity Installed

[Rack Units]

Estimated Service Life (Years)

Radio Access Network

Drop-Down Lists


Drop-Down Lists


Drop-Down Lists


Brands

#1

#2

#3

Base Station Controller - CDMA (BSC)










Base Station Controller - GSM (BSC)










Base Transceiver Station - CDMA/EVDO (BTS)










Base Transceiver Station - GSM (BTS)










Femto Gateway










Node B [3G]










eNodeB [4G - LTE]










Packet Control Function (PCF)










Packet Control Unit (PCU)










Radio Network Controller (RNC)










Wireless Access Points for WiFi










Wireless Access Points for WiMAX










Wireless Core










Authentication Center (AC)










Authentication Center (AuC)










Evolved Packet Core (EPC)










Gateway GPRS Support Node (GGSN)










GPRS Support Node (GSN)










Home Subscriber Server (HSS)/Home Location Register (HLR)










Internet Protocol Multimedia Subsystem (IMS)










Media Gateway










Mobile Switching Center (MSC)










Multimedia Message Service Center (MMSC)










Media Server










Proxy-Call Session Control Function (P-CSCF)










Service Control Function (SCF)










Serving GPRS Support Node (SGSN)










Session Border Controller (SBC)










Short Message Service Center (SMSC)










Signaling Gateway [SS7 Circuit Switching]










Signal Transfer Gateway?? [Internet Protocol]










Visitor Location Register (VLR)










Universal Mobile Switching Center (UMSC)










Comments:

BUSINESS CONFIDENTIAL – Per Section 705(d) of the Defense Production Act


Section 2a

Network Systems – Facility Profile: Management & Capability

[Answer ALL questions – Surveys With Blank Responses Will Be Returned For Completion]


Instruction: Complete Sections 2 - 5 for each network facility specified by BIS that your company operates in the United States, its territories, and protectorates.

1. Company Facility Name


Age of the Facility


Street Address


City


State

Zip Code


Manager’s Name


Manager’s Phone Number


FAX Number


Manager’s E-mail Address


Web Site Address


Identify this Facility’s Prime Function(s)

[Check all that apply]


Long-Haul Transmission


Optical/Transmission


Routing


Internet/Peering


Act as a Network Operations Center


Act as a Security Operations Center


Mobile switching center


Cellular base station/Backhaul


Voice Switching/Aggregation


Satellite/ RF Ground Station


Video Head End/Distribution


Undersea cable landing station


Other


Carrier Co-location Facility





Comments:


2. Identify primary point(s) of contact regarding completion of this network facility survey:

Name(s)

Title

Phone

State

E-mail Address











3. Identify person(s) that have lead responsibility in your company for operations, management, and maintenance at this network facility.

Name(s)

Title

Phone

State

E-mail Address











BUSINESS CONFIDENTIAL – Per Section 705(d) of the Defense Production Act



Section 2a

Network Systems – Facility Profile: Management & Capability - continued

[Answer ALL questions – Surveys With Blank Responses Will Be Returned For Completion]


4. State the types of information network facilities that your company operates at this location:


[Check all that apply]


Long-haul switching


Undersea cable landing stations


Long-haul transmission


Satellite Ground Stations


Network Operations Center


Security Operations Center


Data storage center


Other (Describe below)

Comments:

5. Identify the types of data and telecommunications services that your company provides at this location:


[Check all that apply]


Analog Telephony/Time Division Multiplexing (TDM)


Cellular


Voice Over Internet Protocol telephony


Wireless Internet


Internet


Virtual Private Networks


Optical transport/transmission


Data Centers


Microwave transmission


Other (Describe below)


Satellite transmission


Other (Describe below)

Comments:

6. Identify the types of transmission protocols that this facility is equipped to handle:

[Check all that apply]


Multi-protocol Label Switching (MPLS)


Frame Relay (FR)


Optical Transport Network (OTN)


Synchronous Optical Networking (SONET)


Internet Protocol (IP)


Other (Describe below)


Synchronous Digital Hierarchy (SDH)


Dense wave division multiplexer (DWDM)


Other (Describe below)


Asynchronous Transfer Mode (ATM)


Ethernet


Other (Describe below)

7. Describe all other capabilities of this facility:


8. This network facility is controlled by:

[Check one]


My company as Facility Owner


My company as Facility Lessee


My Company as Facility Lessor




A partnership of U.S. companies


A partnership of U.S. and non-U.S. companies


A Non-U.S. company


Other (Please explain below)

Comments:

9. The persons operating this facility for my company are:

[Check all that apply]


Company staff



Facility Owner Staff


Managed Service Provider


Other (Explain below)


Contractor’s Staff


Partner’s Staff


Equipment Vendor


Other (Explain below)

Comments:

BUSINESS CONFIDENTIAL – Per Section 705(d) of the Defense Production Act


Section 2a

Network Systems – Facility Profile: Management & Capability - Continued

[Answer ALL questions – Surveys With Blank Responses Will Be Returned For Completion]


10. The operator of this Network facility:


[Check all that apply]



Owns the network equipment in this building


Leases the network equipment in this building


Utilizes network equipment located at this facility that is provided by other carriers using this facility


Other [Please explain in the space provided below]

Comments:

11.a Are there other carriers at this facility that operate and/or maintain network equipment on this site that they own or lease. [Check]


Yes


No

If the response is “Yes” – Identify the carriers and the types of equipment

Carrier Name

Type of Equipment

Comments







11.b Identify all the carriers that you can connect with or peer with at this facility.

Carrier Name

Carrier Name

Carrier Name







12. The operator of this Network facility employs at this location:


[Check all that apply]


U.S. citizens


Non-U.S. citizens with temporary visas


Persons holding green cards


Other (Explain below)

Comments:

13. Estimate, as a percentage, the current utilization level of this facility relative to total rated traffic capacity.

%

Note: If this is a co-location facility, skip Questions 13-15d; proceed to Question 16.

14.a State the approximate amount of aggregate equipped capacity entering this facility.

(Check only one box)

1-10 Gigabits per second


>10‑100 Gigabits per second


>100 – 1,000 Gigabits per second


> 1 (1,000 Gb/s) – 10 Terabits per second


> 10 – 100 Terabits per second


> 10 Terabits per second (>10,000 Gb/s)

Comments:

BUSINESS CONFIDENTIAL – Per Section 705(d) of the Defense Production Act



Section 2a

Network Systems – Facility Profile: Management & Capability - Continued

[Answer ALL questions – Surveys With Blank Responses Will Be Returned For Completion]



14.b State the approximate amount of aggregate equipped capacity exiting this facility.

(Check only one box)

1-10 Gigabits per second


>10‑100 Gigabits per second


>100 – 1,000 Gigabits per second


> 1 (1,000 Gb/s) – 10 Terabits per second


> 10 – 100 Terabits per second


> 10 Terabits per second (>10,000 Gb/s)

Equipped Capacity: When estimating the aggregate equipped capacity, add the physical bandwidth that is currently provisioned to carry traffic from all system in the facility.

Example 1: Suppose the facility has a DWDM system that has a total capacity of 40 wavelengths, each operating at 10 Gb/s. The carrier has installed 10 wavelengths in the system and has equipped 6 wavelengths to carry traffic. The aggregate equipped capacity for this system is 6 x 10 Gb/s = 60 Gb/s. (counting only traffic exiting the facility). Example 2: Suppose the facility has a router with 4 ports each equipped to carry packets over an OC-192c link. The aggregate equipped capacity would be 4 x 10 Gb/s = 40 Gb/s. (counting only traffic exiting the facility).

14.c Estimate the current utilization level of this facility in terms of the percent of total rack unit capacity.

%


Note: A "rack unit" or rack "U" is an EIA standard for rack-mount equipment. One “rack unit" is equal to 1.75" in height. Internal useable space in a rack is calculated by multiplying the total amount of Rack Units by 1.75". A 44U rack enclosure, for example, would have 77" of internal usable space (44 x 1.75). For Information technology applications, a half-rack typically refers to a unit that is 1U high and half the depth of a 4-post rack (e.g., a network switch, router, KVM switch, or server). This configuration enables two half-rack units can be mounted in 1U of space (e.g., a unit mounted on the front of the rack and a unit in the rear).

Comments:

15.a State the total square footage of space available at this facility for housing network operations equipment.

Total Square Feet

15.b For this facility, state the percent total square footage of space dedicated for housing network operations equipment that is now in use:

Percent of Space Utilization





15.c State the total power rating at this facility for driving network equipment operations.

Kilowatts

15.d For this facility, state the percent of the total power rating for driving network equipment operations that is now in use:

Percent of Power Rating Utilization





Comments:


16.a For fiber optic cable servicing this facility, state the portion your company leases from another carrier or fiber optic infrastructure supplier:

%


16.b Identify the carriers/fiber optic infrastructure suppliers that provide your firm with capacity at this facility. If you do not lease fiber capacity, go to Question 17.


Fiber Cable Lessor/

Company Name


Fiber Cable Lessor

Company Name






Comments:


17. State the year when this network facility last underwent a major modernization of network equipment:


18. In what year is this network facility likely to undergo its next major equipment modernization?



Comments:



19. Are there plans to move this network facility to another physical location in the next five years?


Yes


No



20. Are there plans to close this network facility in the next five years?


Yes


No



Comments:


BUSINESS CONFIDENTIAL – Per Section 705(d) of the Defense Production Act




Section 2b

Network Systems - Facility Profile: Types of Organizations Served

[Answer ALL questions – Surveys With Blank Responses Will Be Returned For Completion]


1. Does this network facility connect directly to:

U.S. Government telecommunications lines?


Yes


No

U.S. Government Data Centers?


Yes


No


2. Specify the types of commercial, industrial, institutional, or government organizations that this facility serves directly:


Types of Customers


Types of Services Provided

[Check all that apply]

Analog & Digital Telephone

Domestic & International Long-Distance

Internet/

VOIP Services

Dedicated Private Network Lines

Virtual Private Networks

DSL, Broadband (e.g. DSL, Triple-Play)

Other

Commercial Customers








Chemical Manufacturers








Electric utilities – power distribution








Food Processors








Manufacturing facilities








Natural Gas Distributors








Pharmaceutical production plants








Power plants (fossil, nuclear)








Refineries








Transportation hubs (airports, rail)








Water distribution systems








U.S. Local & State Governments








Civilian Federal Government Offices








U.S. Department of Defense Organizations








U.S. Law Enforcement Agencies








Foreign Governments








Comments:


3. State the percent of the network equipment installed in this facility that is:

%

Manufacturer Standard Product

%

Modified Manufacturer Standard Product

%

Custom-Built Product for this facility

Comments:

BUSINESS CONFIDENTIAL – Per Section 705(d) of the Defense Production Act


Section 3a

Network Systems – Facility Profile: Current Types of Installed Equipment - Backbone

[Answer ALL questions – Surveys With Blank Responses Will Be Returned For Completion]


1. For each type of network system listed in the left-hand column, identify the three most prevalent brands currently installed in this network facility; 2) state number of rack units installed for each manufacturer; and 3) estimate the mean time to replacement (remaining service life). [Check all that apply]

Network Devices –

Backbone/Core

#1 Brand/

Manufacturer

Quantity Installed [Rack Units]

#2 Brand/

Manufacturer

Quantity Installed

[Rack Units]

#3 Brand/

Manufacturer

Quantity Installed

[Rack Units]

Expected Replacement

Year(s)

Optical/ Transmission and Layer 1 – Switching, Grooming, Aggregation

Drop-Down Lists


Drop-Down Lists


Drop-Down Lists


Brand

#1

#2

#3

Ultra Long-Haul Dense Wave Division Multiplexer (DWDM) Terminal1










Long-Haul Dense Wave Division Multiplexer Terminal2










Legacy Dense Wavelength Division Multiplexer (DWDM) Systems3










Coarse Wave Division Multiplexer

[Minimum wavelength spacing > 5 nm]










Reconfigurable optical Add-Drop multiplexer (ROADM)










Hybrid DWDM Transport and Optical Cross Connect System










Optical Amplification/Repeater System











Intelligent Photonic Cross Connect (PXC)











Wave Division Multiplexer Ethernet Transport Optical Cross Connect










Automated Optical Patch Panel











Fixed Add-Drop Multiplexer (OADM)

[Static optical ADM]










Optical Cross-Connect System (OXC)











Digital Cross Connect System











SONET/SDH/OTN Add-Drop Multiplexer

[Electrically grooms SONET/SDH/OTN channels]










Packet Optical Transport System (P-OTS)4











Comments:

1 Transmission capability of greater than 1,000 kilometers; maximum capacity of more than 8 wavelengths.

2 Maximum reach with optical amplification is 250 to 1,000 kilometers; maximum capacity of more than 8 wavelengths.

3 Maximum capacity equal to or less than (<=) 8 wavelengths.

4 Combines DWDM transmission, grooming, and switching with Layer 2 Carrier Ethernet and MPLS capabilities. Supports one or more packet layer protocols.

BUSINESS CONFIDENTIAL – Per Section 705(d) of the Defense Production Act

Section 3a - continued

Network Systems – Facility Profile: Current Types of Installed Equipment - Backbone

[Answer ALL questions – Surveys With Blank Responses Will Be Returned For Completion]


1. – continued For each type of network system listed in the left-hand column, 1) identify the three most prevalent brands currently installed in this network facility; 2) state number of rack units installed for each manufacturer; and 3) estimate when these network systems are likely to be replaced. [Check all that apply]

Network Devices –

Backbone/Core - continued

#1 Brand/

Manufacturer

Quantity Installed

[Rack Units]

#2 Brand/

Manufacturer

Quantity Installed

[Rack Units]

#3 Brand/

Manufacturer

Quantity Installed

[Rack Units]

Expected Replacement Date (Year)

Optical/ Transmission and Layer 1 – Switching, Grooming, Aggregation

Drop-Down Lists


Drop-Down Lists


Drop-Down Lists


Brand

#1

#2

#3

Multi-Service Provisioning Platform (MSPP)











Free-space Optical Transmission

[link capacity >= 1 gigabit per second]










Microwave Transmission

[link capacity >= 622 megabits per second]










Other [Describe optical systems not listed that groom/switch/transport traffic at > 10 gigabits per second.]










Comments:


BUSINESS CONFIDENTIAL – Per Section 705(d) of the Defense Production Act



Section 3a - continued

Network Systems – Facility Profile: Current Types of Installed Equipment - Backbone

[Answer ALL questions – Surveys With Blank Responses Will Be Returned For Completion]


1. – continued For each type of network system listed in the left-hand column, 1) identify the three most prevalent brands currently installed in this network facility; 2) state number of rack units installed for each manufacturer; and 3) estimate when these network systems are likely to be replaced. [Check all that apply]

Network Devices –

Backbone/Core

#1 Brand/

Manufacturer

Quantity Installed

[Rack Units]

#2 Brand/

Manufacturer

Quantity Installed

[Rack Units]

#3 Brand/

Manufacturer

Quantity Installed

[Rack Units]

Expected Replacement Date (Year)

Link-Layer Transmission/Switching/ Aggregation Systems

Drop-Down Lists


Drop-Down Lists


Drop-Down Lists


Brand

#1

#2

#3

Asynchronous Transfer Mode (ATM) Core Switch [Total switching capacity >= 10 gigabits per second]










Frame Relay Switch [Total switching capacity >= 10 gigabits per second]










Carrier Ethernet Services Router [Supports ethernet services, e.g., E-Line, E-LAN, E-Tree]










Resilient Packet Ring (RPR) [Or, equivalent technology]










Core Ethernet Aggregation and Switching











Other [Describe optical systems not listed that groom/switch/transport traffic at > 10 gigabits per second.]










Comments:

Network Routing Systems








#1

#2

#3

Core Internet Protocol (IP)/ Multi-Protocol Label Switching (MPLS)










Other [Describe optical systems not listed that groom/switch/transport traffic at > 10 gigabits per second.]










Comments:

Telephony Systems








#1

#2

#3

Class 5 Telephony Switch











Tandem Switch











Signal Transfer Point (STP)











Primary Reference Source (PRS) – Stratum 1 (Cesium-based)










Primary Reference Source (PRS) – Stratum 2 (Rubidium-, GPS-assisted)










Comments:

BUSINESS CONFIDENTIAL – Per Section 705(d) of the Defense Production Act


Section 3a - continued

Network Systems – Facility Profile: Current Types of Installed Equipment - Aggregation

[Answer ALL questions – Surveys With Blank Responses Will Be Returned For Completion]


2. For each type of network system listed in the left-hand column, 1) identify the three most prevalent brands currently installed in this network facility; 2) state number of rack units installed for each manufacturer; and 3) estimate when these network systems are likely to be replaced.

[Check all that apply]

Network Devices –

Aggregation/Metro Core

#1 Brand/

Manufacturer

Quantity Installed

[Rack Units]

#2 Brand/

Manufacturer

Quantity Installed

[Rack Units]

#3 Brand/

Manufacturer

Quantity Installed

[Rack Units]

Expected Replacement Date (Year)

Optical/ Transmission and Layer 1 – Switching, Grooming, Aggregation

Drop-Down Lists


Drop-Down Lists


Drop-Down Lists


Brand

#1

#2

#3

Ultra Long-Haul Dense Wave Division Multiplexer (DWDM) Terminal1










Long-Haul Dense Wave Division Multiplexer Terminal2










Legacy Dense Wavelength Division Multiplexer (DWDM) Systems3










Coarse Wave Division Multiplexer

[Minimum wavelength spacing > 5 nanometers]










Optical Amplification/Repeater System











Reconfigurable optical Add-Drop multiplexer (ROADM)










Hybrid DWDM Transport and Optical Cross Connect System.[e.g., Infinera]










Intelligent Photonic Cross Connect (PXC)











Automated Optical Patch Panel











Fixed Add-Drop Multiplexer (OADM)

[Static optical ADM]










Optical Cross-Connect System (OXC)











Digital Cross Connect System











SONET/SDH/OTN Add-Drop Multiplexer

[Electrically grooms SONET/SDH/OTN channels]










Packet Optical Transport System (P-OTS)4











1 Transmission capability of greater than 1,000 kilometers; maximum capacity of more than 8 wavelengths.

2 Maximum reach with optical amplification is 250 to 1,000 kilometers; maximum capacity of more than 8 wavelengths.

3 Maximum capacity equal to or less than (<=) 8 wavelengths.

4 Combines DWDM transmission, grooming, and switching with Layer 2 Carrier Ethernet and MPLS capabilities. Supports one or more packet layer protocols.

BUSINESS CONFIDENTIAL – Per Section 705(d) of the Defense Production Act



Section 3a - continued

Network Systems – Facility Profile: Current Types of Installed Equipment - Aggregation

[Answer ALL questions – Surveys With Blank Responses Will Be Returned For Completion]


2. For each type of network system listed in the left-hand column, 1) identify the three most prevalent brands currently installed in this network facility; 2) state number of rack units installed for each manufacturer; and 3) estimate when these network systems are likely to be replaced. [Check all that apply]

Network Devices –

Aggregation/ Metro Core – continued

#1 Brand/

Manufacturer

Quantity Installed

[Rack Units]

#2 Brand/

Manufacturer

Quantity Installed

[Rack Units]

#3 Brand/

Manufacturer

Quantity Installed

[Rack Units]

Expected Replacement Date (Year)

Optical/ Transmission and Layer 1 – Switching, Grooming, Aggregation

Drop-Down Lists


Drop-Down Lists


Drop-Down Lists


Brands

#1

#2

#3

Multi-Service Provisioning Platform (MSPP)











Free-space Optical Transmission

[link capacity >= 1 gigabit per second]










Microwave Transmission

[link capacity >= 622 mega bits per second]










Other [Describe optical systems not listed that groom/switch/transport traffic at > 10 gigabits per second.]










Comments:


BUSINESS CONFIDENTIAL – Per Section 705(d) of the Defense Production Act



Section 3a - continued

Network Systems – Facility Profile: Current Types of Installed Equipment - Aggregation

[Answer ALL questions – Surveys With Blank Responses Will Be Returned For Completion]


2. – continued For each type of network system listed in the left-hand column, 1) identify the three most prevalent brands currently installed in this network facility; 2) state number of rack units installed for each manufacturer; and 3) estimate when these network systems are likely to be replaced. [Check all that apply]

Network Devices –

Aggregation/ Metro Core

#1 Brand/

Manufacturer

Quantity Installed

[Rack Units]

#2 Brand/

Manufacturer

Quantity Installed

[Rack Units]

#3 Brand/

Manufacturer

Quantity Installed

[Rack Units]

Expected Replacement Date (Year)

Link-Layer Transmission/Switching/ Aggregation Systems

Drop-Down Lists


Drop-Down Lists


Drop-Down Lists


Brands

#1

#2

#3

Asynchronous Transfer Mode (ATM) Core Switch [Total switching capacity >= 10 gigabits per second]










Frame Relay Switch [Total switching capacity >= 10 gigabits per second]










Carrier Ethernet Services Router [Supports ethernet services, e.g., E-Line, E-LAN, E-Tree]










Resilient Packet Ring (RPR) [Or, equivalent technology]










Core Ethernet Aggregation and Switching











Other [Describe optical systems not listed that groom/switch/transport traffic at > 10 gigabits per second.]










Comments:

Network Routing Systems








#1

#2

#3

Core Internet Protocol (IP)/ Multi-Protocol Label Switching (MPLS)










Other [Describe optical systems not listed that groom/switch/transport traffic at > 10 gigabits per second.]










Comments:

Telephony Systems








#1

#2

#3

Class 5 Telephony Switch* (See definition)











Tandem Switch











Signal Transfer Point (STP)











Primary Reference Source (PRS) – Stratum 1 (Cesium-based)










Primary Reference Source (PRS) – Stratum 2 (Rubidium-, GPS-assisted)










BUSINESS CONFIDENTIAL – Per Section 705(d) of the Defense Production Act



Section 3a - continued

Network Systems – Facility Profile: Current Types of Installed Equipment - Backbone

[Answer ALL questions – Surveys With Blank Responses Will Be Returned For Completion]


3. Starting with the most recent equipment purchase and working backwards, 1) identify by system type the equipment brands installed in this network facility in the last three years; 2) state the number of rack units installed; and 3) estimate the service lifetime (in years). [Check all that apply]

Network Devices –

Backbone/Core

#1 Brand/

Manufacturer

Quantity Installed

[Rack Units]

#2 Brand/

Manufacturer

Quantity Installed

[Rack Units]

#3 Brand/

Manufacturer

Quantity Installed

[Rack Units]

Estimated Service Life (Years)

Optical/ Transmission and Layer 1 – Switching, Grooming, Aggregation

Drop-Down Lists


Drop-Down Lists


Drop-Down Lists


Brands

#1

#2

#3

Ultra Long-Haul Dense Wave Division Multiplexer (DWDM) Terminal1










Long-Haul Dense Wave Division Multiplexer Terminal2










Legacy Dense Wavelength Division Multiplexer (DWDM) Systems3










Coarse Wave Division Multiplexer

[Minimum wavelength spacing > 5 nm]










Reconfigurable optical Add-Drop multiplexer (ROADM)










Hybrid DWDM Transport and Optical Cross Connect System










Optical Amplification/Repeater System











Intelligent Photonic Cross Connect (PXC)











Wave Division Multiplexer Ethernet Transport Optical Cross Connect










Automated Optical Patch Panel











Fixed Add-Drop Multiplexer (OADM)

[Static optical ADM]










Optical Cross-Connect System (OXC)











Digital Cross Connect System











SONET/SDH/OTN Add-Drop Multiplexer

[Electrically grooms SONET/SDH/OTN channels]










Packet Optical Transport System (P-OTS)4











Comments:

1 Transmission capability of greater than 1,000 kilometers; maximum capacity of more than 8 wavelengths.

2 Maximum reach with optical amplification is 250 to 1,000 kilometers; maximum capacity of more than 8 wavelengths.

3 Maximum capacity equal to or less than (<=) 8 wavelengths.

4 Combines DWDM transmission, grooming, and switching with Layer 2 Carrier Ethernet and MPLS capabilities. Supports one or more packet layer protocols.

BUSINESS CONFIDENTIAL – Per Section 705(d) of the Defense Production Act

Section 3a - continued

Network Systems – Facility Profile: Current Types of Installed Equipment - Backbone

[Answer ALL questions – Surveys With Blank Responses Will Be Returned For Completion]


3. – continued Starting with the most recent equipment purchase and working backwards, 1) identify by system type the equipment brands installed in this network facility in the last three years; 2) state the number of rack units installed; and 3) estimate the service lifetime (in years). [Check all that apply]

Network Devices –

Backbone/Core - continued

#1 Brand/

Manufacturer

Quantity Installed

[Rack Units]

#2 Brand/

Manufacturer

Quantity Installed

[Rack Units]

#3 Brand/

Manufacturer

Quantity Installed

[Rack Units]

Estimated Service Life (Years)

Optical/ Transmission and Layer 1 – Switching, Grooming, Aggregation

Drop-Down Lists


Drop-Down Lists


Drop-Down Lists


Brands

#1

#2

#3

Multi-Service Provisioning Platform (MSPP)











Free-space Optical Transmission

[link capacity >= 1 gigabit per second]










Microwave Transmission

[link capacity >= 622 megabits per second]










Other [Describe optical systems not listed that groom/switch/transport traffic at > 10 gigabits per second.]










Comments:


BUSINESS CONFIDENTIAL – Per Section 705(d) of the Defense Production Act



Section 3a - continued

Network Systems – Facility Profile: Current Types of Installed Equipment - Backbone

[Answer ALL questions – Surveys With Blank Responses Will Be Returned For Completion]


3. – continued Starting with the most recent equipment purchase and working backwards, 1) identify by system type the equipment brands installed in this network facility in the last three years; 2) state the number of rack units installed; and 3) estimate the service lifetime (in years). [Check all that apply]

Network Devices –

Backbone/Core

#1 Brand/

Manufacturer

Quantity Installed

[Rack Units]

#2 Brand/

Manufacturer

Quantity Installed

[Rack Units]

#3 Brand/

Manufacturer

Quantity Installed

[Rack Units]

Estimated Service Life (Years)

Link-Layer Transmission/Switching/ Aggregation Systems

Drop-Down Lists


Drop-Down Lists


Drop-Down Lists


Brands

#1

#2

#3

Asynchronous Transfer Mode (ATM) Core Switch [Total switching capacity >= 10 gigabits per second]










Frame Relay Switch [Total switching capacity >= 10 gigabits per second]










Carrier Ethernet Services Router [Supports ethernet services, e.g., E-Line, E-LAN, E-Tree]










Resilient Packet Ring (RPR) [Or, equivalent technology]










Core Ethernet Aggregation and Switching











Other [Describe optical systems not listed that groom/switch/transport traffic at > 10 gigabits per second.]










Comments:

Network Routing Systems








#1

#2

#3

Core Internet Protocol (IP)/ Multi-Protocol Label Switching (MPLS)










Other [Describe optical systems not listed that groom/switch/transport traffic at > 10 gigabits per second.]










Comments:

Telephony Systems








#1

#2

#3

Class 5 Telephony Switch











Tandem Switch











Signal Transfer Point (STP)











Primary Reference Source (PRS) – Stratum 1 (Cesium-based)










Primary Reference Source (PRS) – Stratum 2 (Rubidium-, GPS-assisted)










Comments:

BUSINESS CONFIDENTIAL – Per Section 705(d) of the Defense Production Act


Section 3a - continued

Network Systems – Facility Profile: Current Types of Installed Equipment - Aggregation

[Answer ALL questions – Surveys With Blank Responses Will Be Returned For Completion]


4. Starting with the most recent equipment purchase and working backwards, 1) identify by system type the equipment brands installed in this network facility in the last three years; 2) state the number of rack units installed; and 3) estimate the service lifetime (in years). [Check all that apply]

Network Devices –

Aggregation/Metro Core

#1 Brand/

Manufacturer

Quantity Installed

[Rack Units]

#2 Brand/

Manufacturer

Quantity Installed

[Rack Units]

#3 Brand/

Manufacturer

Quantity Installed

[Rack Units]

Estimated Service Life (Years)

Optical/ Transmission and Layer 1 – Switching, Grooming, Aggregation

Drop-Down Lists


Drop-Down Lists


Drop-Down Lists


Brands

#1

#2

#3

Ultra Long-Haul Dense Wave Division Multiplexer (DWDM) Terminal1










Long-Haul Dense Wave Division Multiplexer Terminal2










Legacy Dense Wavelength Division Multiplexer (DWDM) Systems3










Coarse Wave Division Multiplexer

[Minimum wavelength spacing > 5 nanometers]










Optical Amplification/Repeater System











Reconfigurable optical Add-Drop multiplexer (ROADM)










Hybrid DWDM Transport and Optical Cross Connect System.[e.g., Infinera]










Intelligent Photonic Cross Connect (PXC)











Automated Optical Patch Panel











Fixed Add-Drop Multiplexer (OADM)

[Static optical ADM]










Optical Cross-Connect System (OXC)











Digital Cross Connect System











SONET/SDH/OTN Add-Drop Multiplexer

[Electrically grooms SONET/SDH/OTN channels]










Packet Optical Transport System (P-OTS)4











1 Transmission capability of greater than 1,000 kilometers; maximum capacity of more than 8 wavelengths.

2 Maximum reach with optical amplification is 250 to 1,000 kilometers; maximum capacity of more than 8 wavelengths.

3 Maximum capacity equal to or less than (<=) 8 wavelengths.

4 Combines DWDM transmission, grooming, and switching with Layer 2 Carrier Ethernet and MPLS capabilities. Supports one or more packet layer protocols.

BUSINESS CONFIDENTIAL – Per Section 705(d) of the Defense Production Act



Section 3a - continued

Network Systems – Facility Profile: Current Types of Installed Equipment - Aggregation

[Answer ALL questions – Surveys With Blank Responses Will Be Returned For Completion]


4. Starting with the most recent equipment purchase and working backwards, 1) identify by system type the equipment brands installed in this network facility in the last three years; 2) state the number of rack units installed; and 3) estimate the service lifetime (in years). [Check all that apply]

Network Devices –

Aggregation/ Metro Core – continued

#1 Brand/

Manufacturer

Quantity Installed

[Rack Units]

#2 Brand/

Manufacturer

Quantity Installed

[Rack Units]

#3 Brand/

Manufacturer

Quantity Installed

[Rack Units]

Estimated Service Life (Years)

Optical/ Transmission and Layer 1 – Switching, Grooming, Aggregation

Drop-Down Lists


Drop-Down Lists


Drop-Down Lists


Brands

#1

#2

#3

Multi-Service Provisioning Platform (MSPP)











Free-space Optical Transmission

[link capacity >= 1 gigabit per second]










Microwave Transmission

[link capacity >= 622 mega bits per second]










Other [Describe optical systems not listed that groom/switch/transport traffic at > 10 gigabits per second.]










Comments:


BUSINESS CONFIDENTIAL – Per Section 705(d) of the Defense Production Act



Section 3a - continued

Network Systems – Facility Profile: Current Types of Installed Equipment - Aggregation

[Answer ALL questions – Surveys With Blank Responses Will Be Returned For Completion]


4. – continued Starting with the most recent equipment purchase and working backwards, 1) identify by system type the equipment brands installed in this network facility in the last three years; 2) state the number of rack units installed; and 3) estimate the service lifetime (in years). [Check all that apply]

Network Devices –

Aggregation/ Metro Core

#1 Brand/

Manufacturer

Quantity Installed

[Rack Units]

#2 Brand/

Manufacturer

Quantity Installed

[Rack Units]

#3 Brand/

Manufacturer

Quantity Installed

[Rack Units]

Estimated Service Life (Years)

Link-Layer Transmission/Switching/ Aggregation Systems

Drop-Down Lists


Drop-Down Lists


Drop-Down Lists


#1

#2

#3

Asynchronous Transfer Mode (ATM) Core Switch [Total switching capacity >= 10 gigabits per second]










Frame Relay Switch [Total switching capacity >= 10 gigabits per second]










Carrier Ethernet Services Router [Supports ethernet services, e.g., E-Line, E-LAN, E-Tree]










Resilient Packet Ring (RPR) [Or, equivalent technology]










Core Ethernet Aggregation and Switching











Other [Describe optical systems not listed that groom/switch/transport traffic at > 10 gigabits per second.]










Comments:

Network Routing Systems








#1

#2

#3

Core Internet Protocol (IP)/ Multi-Protocol Label Switching (MPLS)










Other [Describe optical systems not listed that groom/switch/transport traffic at > 10 gigabits per second.]










Comments:

Telephony Systems








#1

#2

#3

Class 5 Telephony Switch* (See definition)











Tandem Switch











Signal Transfer Point (STP)











Primary Reference Source (PRS) – Stratum 1 (Cesium-based)










Primary Reference Source (PRS) – Stratum 2 (Rubidium-, GPS-assisted)










BUSINESS CONFIDENTIAL – Per Section 705(d) of the Defense Production Act



Section 3a

Network Systems – Facility Profile: Capital Equipment Acquisition – Replacement Cycles

[Answer ALL questions – Surveys With Blank Responses Will Be Returned For Completion]


5. State the replacement cycle for major systems at this network facility location:


- <12 months


- 13-24 months


- 25-26 months


- 37-48 months


- 49-60 months


- > 60 months

Comments:

6.a Is your company likely to purchase the same brands of equipment when it refits/modernizes this facility?


Yes


No

6.b Identify the top five reasons that would cause you to purchase another brand for each type of equipment listed. [Check only five categories]

Device Type

Explanation for Switching Brands of Network Equipment

Equipment not readily available; can not meet delivery schedule.

Equipment company can not meet new performance specifications

Equipment company’s products are not sufficiently reliable

Equipment company’s products are not sufficiently secure

Equip. Mfg.’s products not cost competitive [Excluding finance-ing packages]

Equipment company’s enabling software programs are inadequate

Equipment company’s technical support is inadequate

Competitors offer better financing packages

Other

Not likely to shift equipment brand

Optical/ Transmission and Layer 1

Switching, Grooming, Aggregation











Link-Layer Transmission/Switching/ Aggregation Systems











Network Routing Systems











Telephony Systems











Comments:

BUSINESS CONFIDENTIAL – Per Section 705(d) of the Defense Production Act


Section 3b

Network Systems – Facility Profile: Current Modes for Updating Equipment Software

[Answer ALL questions – Surveys With Blank Responses Will Be Returned For Completion]


1. State the circumstances for which software/firmware is updated, upgraded, or patched on network systems in this facility – to:


[Check all that apply]


Provide new services


Fix a malfunction or bug observed in the system


Provide new security features


Perform an upgrade recommended by the system manufacturer


Upgrade systems as part of a service or maintenance contract


Other [Explain in the space provided below.]

Comments:

2. Using a scale of 1-5 (zero meaning not at all; one being least frequent, and 5 most frequent) rank the methods that are most often used to update network devices installed in this facility:





Remote access to the device from the operator’s network operations or maintenance center located within the United States


Remote access to the device from the operator’s network operations or maintenance center located outside of the United States


Remote access to the device from another location within the United States owned by the network operator


Remote access to the device from another location outside the United States owned by the network operator


Remote access to the device from a third-party facility (such as a system vendor or maintenance contractor) located within the United States


Remote access to the device from a third-party facility (such as a system vendor or maintenance contractor) located outside of the United States


Physical (local) access to the systems from their installed locations


Other [Explain in the space provided below.]

Comments:

3. The updating of device/system software is initiated at this facility by the:

[Check all that apply]


Network operator – Company employee from a corporate location


Employees at this facility


Corporate network management system via automatic download




U.S.-Based Maintenance contractor



Non-U.S.-Based Maintenance Contractor


System manufacturer/vendor


Other [If “Other Parties”, explain in the space provided below.]

Comments:

4. Software on devices/systems installed in this facility are patched/upgraded at least once every: [Check appropriate box]


Daily


Weekly


Semi-annually


Yearly


Monthly


Quarterly


Never upgraded since installation

5. Does your company have written procedures governing how software installations are implemented for network devices critical the operation of this facility?


Yes


No

Comments:

6. Describe (in the space provided below) your company’s procedures for assuring that software updates of network devices critical to the operation of this facility are performed securely.

Comments:

BUSINESS CONFIDENTIAL – Per Section 705(d) of the Defense Production Act


Section 3b - continued

Network Systems – Facility Profile: Current Modes for Updating Equipment Software

[Answer ALL questions – Surveys With Blank Responses Will Be Returned For Completion]


7. For systems operating in your network, indicate whether your organization requests, performs, or participates the following forms of on-line, low-level software debugging:

[Check all that apply]


File system analysis


Memory analysis



Running firmware analysis


Manual firmware patching/modification


Operating system modification


None at all

Comments:

8a. Low-level debugging on this facility’s network systems is typically performed :

[Check one box only]


On site


Remotely


Both

8b. Low-level debugging on this facility’s network systems is typically performed by:

[Check all that apply]



Maintenance and technical personnel employed by the network operator


Maintenance and technical personnel employed by the OEM system manufacturer/OEM- authorized vendor


Maintenance and technical personnel working for a third-party contractor


Other [If “Other Parties”, explain in the space provided below.]

Comments:

9. Identify the circumstances that prompt the need to perform low-level debugging on carrier operating equipment: [Check all that apply]


Equipment upgrade/Patch Required


Malware suspected


Equipment malfunction diagnostics and repair


Debugging performed at the request of another party (vendor, audit firm, etc.)


Security breach vulnerability suspected


Other [Explain in the space provided below.]

Comments:

10. Identify by checking the appropriate boxes 1) the types Operational Support Systems* (OSS) equipment/software that your company utilizes for the operation of network systems at this facility; 2) Identify by checking the appropriate box whether this function is performed internally by company employees, or third-party contractors. If it is a third-party supplier, provide contractor/manufacturer(s) names; and the names of the systems/products employed.

Type of Support System


Internal-Carrier System


Third-Party Contractor(s)

Product Brand Name


On Site Support


Internal-Carrier System


Drop-Down List



Parts and Repair Management


Internal-Carrier System





Remote Management


Internal-Carrier System





Service Level Agreements


Internal-Carrier System





Technical Support (24x7)


Internal-Carrier System





Other


Internal-Carrier System





Other


Internal-Carrier System




Comments:


BUSINESS CONFIDENTIAL – Per Section 705(d) of the Defense Production Act



FOR USG REVIEW – Incomplete Universe of Operational Support System (OSS) vendors to appear in Drop-Down Boxes

ADC Telecommunications, Inc.

Eftia OSS Solutions, Inc.

Netcracker Technology Corp.

Telcordia Technologies, Inc.



Accenture

Ericsson AB

Nokia Corp.

Tertio Telecoms, Ltd.



Agilent

Formula Telecom Solutions. Ltd.

Nokia Siemens

Tibco Software, Inc.



Alcatel

Glimmerglass

Nortel Networks Corp.

TTI Team Telecom International




Granite Systems, Inc.


Ultrapower



Amdocs

Guoxin Lucent

Opennet Telecom, Inc.

Vitria Technology, Inc.



Axiom systems

Hewlett-Packard Co.

Oracle

WebMethods, Inc.



BEA Systems, Inc.

Horsebridge

Portal Software, Inc.




Bridgewater Systems Corp.

Huawei

Remedy Corp.

ZTEsoft



Bright Ocean

IBM Corp.





CENX

Ilog, Inc.

SAP




Ciena

Infovista SA





Cisco Systems, Inc.

Intec Telecom Systems plc

Sheer Networks, Inc.




Comptel Corp.

JabobsRimell Ltd.

Siebel Systems, Inc.




Comverse, Inc.

Langchao LG

Spirent plc




Connexn Technologies, Inc.

Lianchuang

Sun Mirosystems, Inc.




Convergys Corp.

LM Ericsson

Subex Azure Ltd.




Cramer Systems Ltd.

Lucent Technologies, Inc.

Syndesis Ltd.




CST Systems Int’l, Inc.

MetaSolv Software, Inc.





Daleen Technologies, Inc.

Micromuse, Inc.





Datang

Motorola, Inc.






MetarNet






MRV Communications

















BUSINESS CONFIDENTIAL – Per Section 705(d) of the Defense Production Act


Section 4

Network Systems – Facility Profile: Counterfeit Network Systems, Subsystems, and Components

[Answer ALL questions – Surveys With Blank Responses Will Be Returned For Completion]


1. Does your company have procedures in place to check equipment entering this facility to determine whether it is counterfeit, or contains counterfeit components?


Yes


No

2. Does your company maintain records of parts and systems that are suspected/confirmed to be counterfeit?


Yes


No

Comments:

3. Does your company/organization report suspected/confirmed counterfeits parts and systems to federal authorities?


Yes


No

4. Does your company know what federal authorities to contact regarding suspected/confirmed counterfeits parts and systems?


Yes


No

Comments:

5. Has your company had its custom-made electronic network devices cloned and sold in the marketplace?



Yes


No


Not Applicable

Comments:

6. In the last five years, has your company seen genuine versions of its custom-made electronic network devices being sold in the marketplace without your authorization?


Yes


No


Not Applicable

Comments:

7. Has your company detected contract manufacturers producing significant part overruns of custom electronic network devices beyond the specified levels ordered by your company?

Yes

No

Not Applicable




8. Does your company have written procedures in place to prevent unauthorized production overruns of its custom electronic network devices by contract manufacturers?




9. Does your company prescribe in writing how “manufacturing seconds” and defective production units of its custom electronic network devices are to be destroyed?




Comments:

10. Do you use written procedures at this network facility to verify that the network systems and replacement parts installed in the facility are genuine parts authorized by the original equipment manufacturer?


Yes


No

Comments:

11. Are personnel at this network facility trained to detect counterfeit electronic systems, components?



Yes


No

Comments:

BUSINESS CONFIDENTIAL - Per Section 705(d) of the Defense Production Act



Section 5

Network Systems – Facility Profile: Security Assurance – Network Operations & Anomalies

[Answer ALL questions – Surveys With Blank Responses Will Be Returned For Completion]


1. Identify the types of equipment installed in this facility that you test to ensure that it has not been compromised and remains secure:


Network management systems


Network security devices


Optical transport systems


Routers


Switches


File servers


Virtual private network servers


Other



2. For each of years 2007-2010, state the number of times your company has detected unauthorized electronic hardware connected to this facility:


2007


2008


2009


2010

Comments:

3. Was the affected equipment installed in place of recommended Original Equipment Manufacturer systems by: [Check all that apply]

Company staff


Yes


No

Unknown party


Yes


No

Company contractor


Yes


No

Other [Explain below


Yes


No

Comments:

4. For this facility, state where your company keeps records of: suspected

/confirmed network components with undocumented functionality; and/or odd network behavior: [Check appropriate boxes]


This facility


Network Oper. Center


No records kept


Corporate offices


Security Oper. Center


Other

5. For each of years 2007-2010, state the number of times your staff has detected undocumented functionality in network hardware and software at this facility that would enable: the mirroring, manipulation, or redirection of data transmissions?

Year

2007

2008

2009

2010

Function

Hardware

Software

Hardware

Software

Hardware

Software

Hardware

Software

Data Mirroring









Data Manipulation









Data Redirection









Denial of Service









Other (Explain below)









Comments:

6. Does your company/organization report events of suspicious equipment behavior at this facility to federal authorities? [Check]


Yes


No

Comments:

7. State the frequency with which your company/ organization actively compiles formal analyses of cyber intrusion activity at this facility: [Check]


Daily


Bi-Weekly


Yearly


Weekly


Monthly


Not at all

Comments:

8. State whether this facility can self-initiate on-site scanning for Malware on the following types of equipment and systems; or indicate whether this scanning function can only be initiated at the corporate level:

[Check appropriate boxes]

Yes

No

Corporate





Optical transmission and switching equipment




Link-layer transmission/switching/aggregation systems




Network routing systems




Telephony systems




Wireless systems




On-site PCs, terminals, workstations & servers that manage network equipment

9. State the frequency for which scans for Malware are conducted on equipment and systems located at this facility:


[Check as appropriate]


Malware

Unauthorized Software Upgrades/Patches


Continuously (automated in real time)


Continuously (automated in real time)


Daily


Weekly


Daily


Weekly


Yearly


Only when Malware is suspected


Yearly


Only when Malware is suspected


Never


Other


Never


Other

Comments:

BUSINESS CONFIDENTIAL - Per Section 705(d) of the Defense Production Act


Section 6 Certification


The undersigned certifies that the information herein supplied in response to this questionnaire is complete and correct to the best of his/her knowledge. It is a criminal offense to willfully make a false statement or representation to any department or agency of the United States Government as to any matter within its jurisdiction. (18 U.S.C.A. 1001 (1984 & SUPP. 1197))

Company Name


Company’s Internet Address


Name of Authorizing Official


Title of Authorizing Official


E-mail Address


Phone Number and Extension


Date Certified


If POC is different than above-named, include below.

Point of Contact Name


Title of Point of Contact


E-mail Address


Phone Number and Extension



Would you like a free copy of the final report?

Yes


No



Section 7 Comments (optional)

In the box below, please provide any additional comments, or any other information, regarding your experience with domestic and Non-U.S. network system equipment information network equipment and/or services utilized in network systems in the United States and its territories; counterfeit products; or other related issues.

Comments:


Section 8 Transmission Instructions For Completed Survey

Please adhere to the following instructions in preparing your completed survey to our office:

1. Save your completed survey in Microsoft EXCEL 1997-2003 format. Make a back-up copy for your corporate records.

2. Upload your completed survey to the following BIS website: www.infonetwork[email protected]


Please approximate how many hours it took to complete this U.S. Information Network Infrastructure survey.


BUSINESS CONFIDENTIAL - Per Section 705(d) of the Defense Production Act

#

File Typeapplication/msword
File Title#1a - New Component Part Manufacturers: Operations
File Modified2011-01-04
File Created2011-01-04

© 2024 OMB.report | Privacy Policy