Supporting Statement (1220-0050) CE Part B (includes Records Study) Final

Supporting Statement (1220-0050) CE Part B (includes Records Study) Final.docx

The Consumer Expenditure Surveys: The Quarterly Interview and the Diary

OMB: 1220-0050

Document [docx]
Download: docx | pdf


Supporting Statement



B. Collection of Information Employing Statistical Methods


  1. Sampling Method

    Consumer Units

    There are approximately 120 million consumer units (CUs) in the Consumer Expenditure (CE) Survey’s universe.1 A CU is the unit from which we seek expenditure reports. It consists of all household members in a particular housing unit or other type of living quarters who are related by blood, marriage, adoption, or some other legal arrangement. The CU determination for unrelated persons is based on financial dependence in three expenditure categories: shelter, food, and all other expenses. Unrelated persons are considered to be separate CUs if they are responsible for paying their own expenses for at least two of these categories, and they are considered to be part of the same CU if they share expenses for at least two of these categories. Approximately 97 percent of all occupied living quarters are occupied by a single CU.


For an overview of the CE sample design and the CU selection process, please refer to the 2008 CE Anthology article, “Selecting a Sample of Households for the Consumer Expenditure Survey” by Susan King and Sylvia Johnson-Herring (attachment O).


The following table shows estimated numbers of CUs in all 91 strata from which PSUs were selected.2 (See the section below entitled “PSUs” for more information.)


Estimated Number of CUs in CE’s 91 Strata


Stratum Code

Estimated Number of CUs in Stratum

A102

2,638,364

A103

3,026,287

A104

1,090,977

A109

3,414,216

A110

3,290,790

A111

2,840,143

A207

3,910,398

A208

2,326,271

A209

1,142,158

A210

1,255,913

A211

1,337,074

A312

2,143,530

A313

1,088,433

A316

2,249,314

A318

2,010,347

A319

1,791,131

A320

1,652,640

A321

1,001,219

A419

5,271,911

A420

1,708,762

A422

3,001,133

A423

1,515,522

A424

1,199,638

A425

1,080,483

A426

416,102

A427

151,786

A429

1,386,391

A433

1,249,024

X102

1,952,217

X104

1,134,768

X108

1,502,043

X210

1,516,051

X212

1,014,829

X218

1,156,950

X220

1,170,958

X222

1,285,116

X224

1,836,414

X226

1,037,673

X228

805,277

X232

745,161

X336

1,688,923

X338

1,174,014

X340

1,209,325

X342

1,572,091

X344

1,230,983

X346

1,114,963

X350

945,564

X352

1,207,497

X354

1,738,799

X356

1,227,421

X358

1,721,728

X362

1,572,044

X364

1,753,919

X366

889,438

X368

1,231,919

X472

1,751,462

X474

1,976,543

X482

1,479,791

X484

1,293,500

Y102

580,120

Y104

674,484

Y206

850,575

Y208

1,011,573

Y210

843,278

Y212

1,011,291

Y314

837,912

Y316

968,028

Y318

802,863

Y320

845,327

Y322

999,410

Y324

800,090

Y426

544,372

Y428

497,626

Y430

613,404

Y432

593,330

Z102

381,318

Z104

593,145

Z206

875,887

Z208

644,053

Z210

791,953

Z212

940,569

Z314

797,111

Z316

756,399

Z318

801,517

Z320

1,052,338

Z322

972,994

Z324

578,927

Z426

279,795

Z428

243,107

Z430

335,915

Z432

353,952

Total

120,000,000





Response Rates


The following table shows expected 2011 sample sizes for the Quarterly Interview Survey (CEQ) and the Diary Survey (CED) based on the target number of completed interviews and 2009 response rates.



Category

Quarterly

(quarter) (1)

Diary

(annual)

Total Sample Size

14,725

12,075

Total Type B and C Noninterviews (vacant, demolished, etc.):

Number

Percent of Total Sample


2,950

20.0


2,425

20.0

Total Eligible Units

11,775

9,650

Total Type A Noninterviews

Number

Percent of Total Eligible


2,950

25.0


2,600

27.0

Total Completed Interviews

Number

Percent of Total Eligible


8,825

75.0


7,050

73.0

(1) This is the expected quarterly sample size for all five waves of the survey.


In 2008  CE staff conducted a nonresponse bias study to determine whether the missing data from nonrespondents generated any bias in the Interview survey’s published estimates.  Their study was undertaken in response to OMB’s recent directive on the matter.  They synthesized the results from four individual studies, and concluded that CE’s data are not “missing completely at random,” but that no bias is introduced into the survey’s published estimates in spite of that fact.  As they said, “the results from these four studies provide a counterexample to the commonly held belief that if a survey’s data are not missing completely at random (MCAR) then its estimates are subject to nonresponse bias.”  For more information, please see “Assessing Nonresponse Bias in the Consumer Expenditure Interview Survey” (attachment V).



For more information on the calculation of response rates, please see the 2008 CE Anthology article “Response Rates in the Consumer Expenditure Survey,” by Sylvia Johnson-Herring and Sharon Krieger (attachment P).



2. Collection Methods


Primary Sampling Units (PSUs)

The primary sampling units (PSUs) used in the CEQ and CED are small clusters of counties. The average number of counties in a PSU is approximately five. The set of sample PSUs used in the two CE surveys consist of 91 PSUs, 75 of which are also used in the Consumer Price Index (CPI). The 91 PSUs fall into four categories:


PSU

size class”

Number

of PSUs

Description

A

28

Large Metropolitan CBSAs (self-representing PSUs)

X

31

Small Metropolitan CBSAs (non-self-representing PSUs)

Y

16

Micropolitan CBSAs (non-self-representing PSUs)

Z

16

Non-CBSA Areas (non-self-representing PSUs)


The BLS selected these PSUs from a stratified sample design in which one PSU was selected from each stratum. Stratification of the non-self-representing PSUs (the X, Y, and Z PSUs) used a 5-variable model whose independent variables were latitude, longitude, latitude squared, longitude squared, and the percent of consumer units living in an urban area.


The CEQ and CED use the same sample designs.  They collect data in the same PSUs, and they share a single sample of households drawn from the survey’s sampling frames.  Within each PSU a single systematic sample of households is drawn from each sampling frame for the two surveys, with the even-numbered “hit strings” assigned to the CEQ and the odd-numbered “hit strings” assigned to the CED.  Thus both surveys try to collect data from the same number of households.  The difference in sample sizes shown in CE publications is due to the fact that each household in the CEQ is asked to participate in four nonbounding interviews, while each household in the CED is asked to complete two weekly diaries.  That is why the sample sizes shown in most CE publication are approximately in the ratio of four-to-two (or equivalently two-to-one).



Sampling Within PSUs


Four non-overlapping sampling frames are used to select CUs for the CE surveys. The four frames are: Unit, Area, Group Quarters (GQ), and Permit. The first three frames, Unit, Area, and GQ, are called “old construction”; and the Permit frame is called “new construction.” The Permit frame consists of housing units built after April 1, 2000.


The Unit frame covers 80% of the sample, and consists of addresses of housing units located in census blocks in areas that issue building permits, and in which a high percentage of the addresses are “complete” (they contain a street name and house number). The Area frame covers 10% of the sample, and consists of addresses located in census blocks that are not in permit-issuing areas, or where more than 4 percent of the addresses in the blocks are incomplete or missing. These addresses are mostly in rural areas. The GQ frame covers 1% of the sample, and consists of boarding houses, hotel rooms, and institutions that are found in the decennial census but are not counted as housing units. These addresses are located in census blocks that contain complete addresses and where building permits are issued. Since the census does not cover housing units built after April 1 of the census year, the list of addresses in these three frames is supplemented by a sample of building permits from the Building Permit Survey, which is conducted by the Census Bureau. The Permit frame is updated by this survey monthly and covers about 9% of the sample.


Within each PSU, a “systematic sample” of households is selected from each of the four frames. The first step in the selection process is sorting the households by variables that are correlated with their expenditures. The purpose of this is to ensure that households of every wealth level are well-represented in the sample. The first household in the systematic sample is selected from the sorted list using a random number generator. After the initial household is selected, another household is selected every “k” households down the list, where “k” is the inverse of the PSU’s probability of selection times the PSU’s sampling interval.


Each frame has different sort variables. For the Unit frame, each address is assigned to a category based on whether the address is rental or owned property. Both the rental and owned categories are subdivided into quartiles of rental and property values, which are defined uniquely for each county. These eight categories are further subdivided by whether the housing unit is vacant or occupied by 1, 2, 3, or more than 4 people, and each cell is assigned a stratification code value (see table 1).


Table 1. CE Unit Frame Stratification Code Values


Renter/Owner Quartile

Number of Occupants


Vacant

1 person

2 persons

3 persons

4+ persons

Renters 1st Quartile

10

11

12

13

14

Renters 2nd Quartile

25

24

23

22

21

Owners 1st Quartile

30

31

32

33

34

Owners 2nd Quartile

45

44

43

42

41

Renters 3rd Quartile

50

51

52

53

54

Renters 4th Quartile

65

64

63

62

61

Owners 3rd Quartile

70

71

72

73

74

Owners 4th Quartile

85

84

83

82

81

Residual Vacant

99






All addresses in the Unit frame fall into one of these cells. When the addresses are placed in order, those whose rent is in the lowest quartile and have a small number of occupants are at one extreme, and those whose property values are in the highest quartile with a small number of occupants are at the other extreme. The stratification code is a surrogate for sorting by expenditures. To draw a systematic sample, the Unit frame addresses are sorted by PSU, urban/rural classification, FIPS State code, FIPS County code, the stratification variable described above, Census Tract code, Census Block code, Basic Street Address, and Unit Sort Order code.


Addresses in the Area frame are sorted in a similar way, but using different variables. A Combined Block Stratification code is calculated using median household size and the proportion of owner-occupied housing units. Then addresses in the Area frame are sorted by PSU, an urban/rural variable, Combined Block Housing Flag, FIPS State code, FIPS County code, Combined Block Stratification code, Census Tract, and a Combined Block code.


The GQ and Permit frames do not have a stratification code, but they have a within-PSU sort. The sort variables in the GQ frame are: PSU, FIPS State code, FIPS County code, Census Tract, Combined Block code, and a Within-Combined-Block code.


For more information on sampling within PSUs for the CE Surveys, please refer to the 2008 CE Anthology article, “Selecting a Sample of Households for the Consumer Expenditure Survey” by Susan King and Sylvia Johnson-Herring (attachment O).



Estimation


The estimation procedure for both the CED and CEQ follow well-established statistical principles. The final weight for each sample CU is the product of the inverse of its probability of selection; a weight adjustment to account for noninterviews; and a calibration adjustment that post-stratifies the weights to account for population undercoverage.


For additional information on the sample design and estimation methodology used in the CE surveys, please refer to “Chapter 16, Consumer Expenditures and Income” in the BLS Handbook of Methods (attachment Q). Another source of information is Kenneth V. Dalton’s memo to Chester E. Bowie, “Specifications for the Selection of CE/CPI Samples in PSUs Based on the 2000 Census,” June 28, 2002 (attachment R); and Alan R. Tupek’s memo to Kenneth V. Dalton, “Calculations of Within-PSU Sampling Intervals for the Census 2000-Based Redesign of the Consumer Expenditure Surveys and the CPI Permit New Construction Housing Sample,” November 11, 2002 (attachment S).



3. Methods to Maximize Response Rates


In the CE Surveys, keeping the noninterview rate at a low level requires special efforts, particularly from the Census Bureau Field staff. For each refusal case, the regional office sends a special letter to the address and assigns the case for follow-up by the program supervisor, supervisory field representative, or senior interviewer, taking into account time and cost considerations.


To adjust for those noninterviews that the field staff cannot convert to interviews, the sample design provides for a noninterview adjustment in the estimation procedure. The computer processing employs special techniques in the CEQ to reference data provided in the previous interview, keeping recall problems and interview time to a minimum.



4. Testing Plans

As part of CE’s goal of continuous improvement, the following methodological studies will be tested (prior to the expiration of the clearance) using the production sample, pending funding and resource availability. Should funding and resources become available, a Non-Substantive Change Request (NCR) will be submitted for all of the proposed studies.

CEQ Interview


  1. $40 CEQ Incentive – Continue to study the results of the prior CEQ Incentives test and determine if additional testing is needed. The results suggest that offering a $40 incentive improves response rates, data quality, respondent cooperation, sample composition, and income reporting.

  2. Bounding Effect Study - A test of bounding effects, by removing sections of the first wave questionnaire in an effort to decrease respondent burden;

  3. Telephone Friendly Questions - A field test of questions that are mode neutral between personal visit and telephone interviewing. Current questions in the interview were designed for a personal visit setting, relying on long lists from the Information Booklet and do not convey well in telephone interviewing.

  4. Promotional Materials Test - A test of providing promotional materials to respondents in order to encourage participation in subsequent waves. A maximum of three items will be tested in several regions to determine the effectiveness of providing the promotional materials to respondents. The items that have been considered for this test are: ceramic, acrylic or plastic mugs, magnets, and reusable canvas bags all with the Census and BLS logos.


CED Diary

  1. Web Diary Test - Test of a web diary designed to decrease respondent burden by offering respondents an electronic way to report expenditures;

  2. Individual Diaries Test – An individual diary test designed to increase reported expenditures by collecting data from all consumer unit members. This test will most likely be combined with the web diary test.


In addition, non-production samples will be used to test the following CEQ Interview topics:


  1. TPOPS Test - A test to combine the CE Interview Survey and CPI’s Point of Purchase Survey (TPOPS). This test might be undertaken to determine whether data collected on point of purchase can be combined with expenditure data in order to provide CPI with lower levels of nonresponse error for point of purchase data.

  2. An Expense Worksheet Test. This study is designed to determine whether it is feasible to ask respondents to record expenditures between interviews on a worksheet and to determine if recording expenditures between interviews results in better data quality and potentially less respondent burden as preparation may make the interview shorter.

  3. Information Booklet for Telephone Respondents Test – This test will follow up on previous research conducted to determine if providing an Information Booklet to telephone respondents improved data quality. Initial research showed that it was not feasible to provide an Information Booklet to telephone respondents using the prior test procedures. Also, there was some evidence that use of the Information Booklet during a telephone interview may have affected the level of expenditures reported. This test would allow CE to test another set of field procedures and better determine the affect of the booklet on expenditure reporting levels.


5. Statistical Contacts

The Census Bureau will collect the data. Within the Census Bureau, you may consult the following individuals and their area of expertise for further information.


Sample Design: Stephen Ash (301) 763-4294

Data Collection: Howard McGowan (301) 763-5342


11 The number of CUs comes from dividing the Census Bureau’s 2009 estimate of the number of people in the civilian non-institutional population (300 million) by the average number of people per CU (2.5).

2 The number of CUs per stratum comes from allocating the nationwide total of 120 million CUs by each stratum’s proportion of the nationwide population in the 2000 Census.

6


File Typeapplication/vnd.openxmlformats-officedocument.wordprocessingml.document
File TitleChanges in section A
AuthorFRIEDLANDER_M
File Modified0000-00-00
File Created2021-01-31

© 2024 OMB.report | Privacy Policy