Railroad Locomotive Safety Standards and Event Recorders

INSTRUCTIONS
1. OPERATED BY: Enter the name and code* of the railroad primarily responsible for operating the locomotive at the time the report is
placed in the locomotive. Operator changes, including dates, shall be noted in "Remarks".
2. OWNER: Enter the name and code* of the owner. Changes in ownership shall be submitted as final reports.
3. MODEL NO.: Enter the original builder's model number.
4. LOCOMOTIVE NO.: Enter only the locomotive number. Include letters only if they are part of the locomotive markings. If the
locomotive number is changed, include the information at the top of the form.
5. YEAR BUILT: Enter the year the locomotive was built or rebuilt.
6. PROPELLED BY: Enter Diesel-Electric (D-E), Electric (E), Mu, Mu Control Cab (MUC), Non-Mu Control Cab (NMUC), Turbo (T),
Torque Converter (TC), Other (O).
7. HORSEPOWER: Enter horsepower rating.
8. TYPE OF SERVICE: Enter type of service the locomotive is assigned to when the report is placed in the locomotive.
9. STEAM GENERATOR: Enter steam generator number(s) and safe working pressure(s).
10. MAXIMUM PISTON TRAVEL: Enter maximum piston travel. Enter only "Nominal" travel and do not include Manufacturers
Tolerance. Also include type of AIR BRAKE.
11. OUT OF USE CREDIT: Enter number of creditable calendar days the locomotive was out-of-use. Less than 30 consecutive calendar
days for any out-of-use period may not be counted. Any entry "out-of-use from
to
" shall be made on an inspection line
and certified when a locomotive is not in use when an inspection would otherwise be due. If the locomotive is out-of-use at the end
of the reporting period, complete the "To" entry with the last day of the period. The entry on the replacement report should then
record the "From" as the beginning of the new period.
12. LAST PERIODIC INSPECTION AND TESTS: This report covers annual periods (January 1 to December 31). The report of the
preceding annual period shall be retained in the locomotive until the first periodic inspection is made after January 1 of each year
or until the form is replaced as required by Section 229.23(e). When a new form 6180.49A is placed in the locomotive, enter the
last periodic inspection information onto the new form in item 12 and the test information in item 24. Tests that are not applicable
should be noted "NA".
INSPECTIONS AND TESTS: Persons making the required tests and periodic inspections shall sign for the items tested or inspected.
The employee's supervisor shall certify that the tests and inspections were completed.
TESTS: Where the carrier has chosen to fragment air brake cleaning, repairing and testing required by Sections 229.27 & 29, an
air record shall be maintained in the cab of the locomotive.
18. H&H: Enter test pressure from the hydrostatic test. If reservoirs are drilled; enter word "Drilled".
* CODE: Carriers shall enter only the code assigned by FRA to their railroad.
19. Any waivers of any type from a requirement of 49 CFR Part 229 shall be identified in block No. 19 by its waiver number or by the
section number affected. Explanatory information regarding the scope and content of the waiver shall be included under
"Remarks".
20. Any waiver from any FRA requirement other than a requirement of 49 CFR Part 229 shall be identified in block No.20 by its
waiver number or by the part and section number affected. Explanatory information regarding the scope and content of the
waiver shall be included under "Remarks".
21. Under Tests (AIR BRAKE 229.29) Fill in the number of calendar days subject air brake equipment is subjected to cleaning, repairing
and testing.
REPAIRS: Defects not properly repaired.

NOISE: Enter any noise tests or related information in accordance with 49 CFR 210.31.

REMARKS: The carriers should enter under "Remarks" any other clarifying or explanatory
information.

Public reporting burden for this information collection is estimated to average two minutes per response, including the time for
reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and
reviewing the collection of information. According to the Paperwork Reduction Act of 1995, no persons are required to respond to
a collection of information unless it displays a currently valid OMB control number. The valid OMB control number for this
information collection is 2130-0004.
U.S. GOVERNMENT PRINTING OFFICE 1985 461-823/33002