Form Web Diary Requirem Web Diary Requirem Web Diary Requirements

The Consumer Expenditure Surveys: The Quarterly Interview and the Diary

Attachment D - Diary 2012 instrument requirements - Web Diary Test changes revised 2012-10

Web Diary Feasibility Test CE Diary

OMB: 1220-0050

Document [docx]
Download: docx | pdf

DIARY 2012 CAPI Instrument Requirements – Web Diary Feasibility Test Changes


Consumer Expenditure DIARY Survey 2012 Instrument Requirements

Coverage section changes

DIARY Section

DIARY CAPI Variable

Change Detail

201201 CEQ CAPI Wording/Specification

201210 (Web Diary Test) Wording/Specification

Coverage

ANYENTR1

Turn question into a fill based on QTYPE due to the Web Diary Feasibility Test

* Were there any expenditures recorded in the Week 1 Diary at pick up?

  1. Yes

  2. No

Skip instructions:

<1, 2> go to ANYRECAL1

^Q_ANYENTR1

  1. Yes

  2. No

Q_ANYENTR1 fill instructions: If QTYPE=1 fill “Did you record any expenses in the Web Diary during the first week?” else fill “* Were there any expenditures recorded in the Week 1 Diary at pick up?

Skip instructions:

<1, 2> go to ANYRECAL1

Coverage

ANYRECAL1

Add fill based on QTYPE due to the Web Diary Feasibility Test

* Were any expenditures added to the Week 1 Diary at pickup through recall?

  1. Yes

  2. No

Skip instructions:

<1> go to ANYRECP1

<2> if ANYENTR1=2 , go to ANYBUY1 else go to RESPONS1

^Q_ANYRECAL1

  1. Yes

  2. No

Q_ANYRECAL1 fill instructions:

If QTYPE=1 fill “* Remember to probe for any purchases not entered in the web diary because the respondent was too busy, forgot, or didn’t think should be included.

* Will any expenditures be added (including receipts) to the Receipts/Recall tab for Week 1?

Else fill: “* Were any expenditures added to the Week 1 Diary at pickup through recall?

Skip instructions:

<1> go to ANYRECP1

<2> if ANYENTR1=2 , go to ANYBUY1 else go to RESPONS1

Coverage

ANYBUY1

  • Add two fills based on QTYPE due to the Web Diary Feasibility Test

  • Remove question mark at the end of the first FR instruction (“Do not…”)

Did ^YOU_ANY have any expenses or purchases last week?

* Do not include any expenses while away overnight?

If NO, make sure all 7 none boxes are checked on the Diary.

Skip instructions

<1, 2, D, R> go to RESPONS1

Did ^YOU_ANY have any expenses or purchases ^Q1_ANYBUY1?

* Do not include any expenses while away overnight

^Q2_ANYBUY1

Q1_ANYBUY1 Fill instructions:

If QTYPE=1 fill “during the first week” else fill “last week”

Q2_ANYBUY1 Fill instructions:

If QTYPE ne 1 FILL “If NO, make sure all 7 none boxes are checked on the Diary.” Else leave blank

Skip instructions

<1, 2, D, R> go to RESPONS1

Coverage

NTYP_PK1


* What type of non-interview do you have?

Type A = No one home, Refusal

Type B = Temporarily absent, Vacant, under construction, occupied by persons with URE

Type C = Demolished, House moved, Merged, Condemned, Located on base, CU moved

  1. TYPE A

  2. TYPE B

  3. TYPE C

Special instructions:

  1. Set PICK_UP1 and PICKDTE1 = empty

Skip instructions:

<1> go to TYPA_PK1

<2> go to TYPB_PK1

<3> go to TYPC_PK1

* What type of non-interview do you have?

Type A = No one home, Refusal

Type B = Temporarily absent, Vacant, under construction, occupied by persons with URE

Type C = Demolished, House moved, Merged, Condemned, Located on base, CU moved ^Q_NTYP_PK1

  1. TYPE A

  2. TYPE B

  3. TYPE C

Q_NTYP_PK1 fill instructions:

If QTYPE=1 then fill “, Web Diary Language Barrier” else leave blank.

Special instructions:

  1. Set PICK_UP1 and PICKDTE1 = empty

Skip instructions:

<1> go to TYPA_PK1

<2> go to TYPB_PK1

<3> go to TYPC_PK1

Coverage

TYPA_PK1

  • New special instructions based on QTYPE for Web Diary Feasibility Test

* Enter TYPE A noninterview:

  1. No one home

  2. Refused

  3. Other Type A – specify

Special instructions:

  1. If TYPA_PK2 is 1 then store 216 in PICK_UP1

If TYPA_PK2 is 3 then store 219 in PICK_UP1

  1. Store current date in PICKDTE1

Skip instructions:

<1> go to END_PICKUP

<2> go to RFRN_PK1

<3> go to TPAS_PK1

* Enter TYPE A noninterview:

  1. No one home

  2. Refused

  3. Other Type A – specify

Special instructions:

  1. If TYPA_PK1 is 1 then store 216 in PICK_UP1

If TYPA_PK1 is 3 then store 219 in PICK_UP1

  1. Store current date in PICKDTE1

Skip instructions:

<1> if DPLC_CHK=1 go to ANYENTR2 else go to END_PICKUP

<2> go to RFRN_PK1

<3> go to TPAS_PK1


Coverage

TYPC_PK1

  • New response options fill based on QTYPE for Web Diary Feasibility Test

  • Fix specs on skip instructions

* Enter TYPE C noninterview

  1. Demolished

  2. House or Mobile Home moved

  3. Converted to permanent nonresidential use

  4. Merged with units in the same structure

  5. Condemned

  6. Located on military base (post)

  7. Unused serial # on listing sheet

  8. CU Moved

  9. CU merge

  10. Spawn in err

  11. Removed during subsampling

  12. Unit already had a chance of selection

  13. Other Type C – specify

Special instructions:

  1. If TYPC_PK1 is 10 then store 290 in PICK_UP1

If TYPC_PK1 is 1 then store 240 in PICK_UP1

If TYPC_PK1 is 2 then store 241 in PICK_UP1

If TYPC_PK1 is 3 then store 243 in PICK_UP1

If TYPC_PK1 is 4 then store 244 in PICK_UP1

If TYPC_PK1 is 5 then store 245 in PICK_UP1

If TYPC_PK1 is 6 then store 252 in PICK_UP1

If TYPC_PK1 is 7 then store 247 in PICK_UP1

If TYPC_PK1 is 8 then store 341 in PICK_UP1

If TYPC_PK1 is 9 then store 342 in PICK_UP1

If TYPC_PK1 is 11 then store 256 in PICK_UP1

If TYPC_PK1 is 12 then store 257 in PICK_UP1

If TYPC_PK1 is 13 then store 248 in PICK_UP1

  1. Store current date in PICK1 and PICKDTE2 and PLCEDAT2

Store PICK_UP1 in INSTAT2 and PICK_UP2

Skip instructions:

<0-9> go to BYOBS_PK1

<10> go to TPCS_PK1

* Enter TYPE C noninterview

  1. Demolished

  2. House or Mobile Home moved

  3. Converted to permanent nonresidential use

  4. Merged with units in the same structure

  5. Condemned

  6. Located on military base (post)

  7. Unused serial # on listing sheet

  8. CU Moved

  9. CU merge

  10. Spawn in err

  11. Removed during subsampling

  12. Unit already had a chance of selection

  13. Other Type C – specify

  14. ^Q_TYPC_PK1

  15. ^Q2_TYPC_PK2

Q_TYPC_PK1 fill instructions:

If QTYPE=1 fill “14. Web Diary spawn” else leave blank

Q2_TYPC_PK fill instructions:

If QTYPE=1 fill “15. Web Diary Language Barrier” else leave blank

Special instructions:

  1. If TYPC_PK1 is 10 then store 290 in PICK_UP1

If TYPC_PK1 is 1 then store 240 in PICK_UP1

If TYPC_PK1 is 2 then store 241 in PICK_UP1

If TYPC_PK1 is 3 then store 243 in PICK_UP1

If TYPC_PK1 is 4 then store 244 in PICK_UP1

If TYPC_PK1 is 5 then store 245 in PICK_UP1

If TYPC_PK1 is 6 then store 252 in PICK_UP1

If TYPC_PK1 is 7 then store 247 in PICK_UP1

If TYPC_PK1 is 8 then store 341 in PICK_UP1

If TYPC_PK1 is 9 then store 342 in PICK_UP1

If TYPC_PK1 is 11 then store 256 in PICK_UP1

If TYPC_PK1 is 12 then store 257 in PICK_UP1

If TYPC_PK1 is 13 then store 248 in PICK_UP1

If TYPC_PK1 is 14 then store 291 in PICK_UP1

If TYPC_PK1 is 15 then store 327 in PICK_UP1

  1. Store current date in PICK1 and PICKDTE2 and PLCEDAT2

Store PICK_UP1 in INSTAT2 and PICK_UP2

Skip instructions:

<1-12, 14-15> go to BYOBS_PK1

<13> go to TPCS_PK1

Coverage

ANYENTR2

Turn question into a fill based on QTYPE due to the Web Diary Feasibility Test

* Were there any expenditures recorded in the Week 2 Diary at pick up?

  1. Yes

  2. No

^Q_ANYENTR2

  1. Yes

  2. No

Q_ANYENTR1 fill instructions: If QTYPE=1 fill “Did you record any expenses in the Web Diary during the second week?” else fill “* Were there any expenditures recorded in the Week 2 Diary at pick up?

Skip instructions:

<1, 2> go to ANYRECAL2

Coverage

ANYRECAL2

Add fill based on QTYPE due to the Web Diary Feasibility Test

* Were any expenditures added to the Week 2 Diary at pickup through recall?

  1. Yes

  2. No

Skip instructions:

<1> go to ANYRECP2

<2> if ANYENTR2=2 , go to ANYBUY2 else go to RESPONS2

^Q_ANYRECAL2

  1. Yes

  2. No

Q_ANYRECAL2 fill instructions:

If QTYPE=1 fill “* Remember to probe for any purchases not entered in the web diary because the respondent was too busy, forgot, or didn’t think should be included.

* Will any expenditures be added (including receipts) to the Receipts/Recall tab for Week 2?

Else fill: “* Were any expenditures added to the Week 2 Diary at pickup through recall?

Skip instructions:

<1> go to ANYRECP2

<2> if ANYENTR2=2 , go to ANYBUY2 else go to RESPONS2

Coverage

ANYBUY2

  • Add two fills based on QTYPE due to the Web Diary Feasibility Test

  • Remove question mark at the end of the first FR instruction (“Do not…”

Did ^YOU_ANY have any expenses or purchases last week?

* Do not include any expenses while away overnight?

If NO, make sure all 7 none boxes are checked on the Diary.

Skip instructions

<1, 2, D, R> go to RESPONS1

Did ^YOU_ANY have any expenses or purchases ^Q1_ANYBUY2?

* Do not include any expenses while away overnight

^Q2_ANYBUY2

Q1_ANYBUY2 Fill instructions:

If QTYPE=1 fill “during the second week” else fill “last week”

Q2_ANYBUY2 Fill instructions:

If QTYPE ne 1 FILL “If NO, make sure all 7 none boxes are checked on the Diary.” Else leave blank

Skip instructions

<1, 2, D, R> go to RESPONS1

Coverage

NTYP_PK2

Add fill for “Web Diary Language Barrier” based on QTYPE as a Type A example

* What type of non-interview do you have?

Type A = No one home, Refusal

Type B = Temporarily absent, Vacant, under construction, occupied by persons with URE

Type C = Demolished, House moved, Merged, Condemned, Located on base, CU moved

  1. TYPE A

  2. TYPE B

  3. TYPE C

Special instructions:

  1. Set PICK_UP2 and PICKDTE2 = empty

Skip instructions:

<1> go to TYPA_PK2

<2> go to TYPB_PK2

<3> go to TYPC_PK2

* What type of non-interview do you have?

Type A = No one home, Refusal

Type B = Temporarily absent, Vacant, under construction, occupied by persons with URE

Type C = Demolished, House moved, Merged, Condemned, Located on base, CU moved ^Q_NTYP_PK2

  1. TYPE A

  2. TYPE B

  3. TYPE C

Q_NTYP_PK2 fill instructions:

If QTYPE=1 then fill “, Web Diary Language Barrier” else leave blank.

Special instructions:

  1. Set PICK_UP1 and PICKDTE1 = empty

Skip instructions:

<1> go to TYPA_PK2

<2> go to TYPB_PK2

<3> go to TYPC_PK2

Coverage

TYPA_PK2

  • New response option fill based on QTYPE for Web Diary Feasibility Test

  • New special instructions based on QTYPE for Web Diary Feasibility Test

* Enter TYPE A noninterview:

  1. No one home

  2. Refused

  3. Other Type A – specify

Special instructions:

  1. If TYPA_PK2 is 1 then store 216 in PICK_UP2

If TYPA_PK2 is 3 then store 219 in PICK_UP2

  1. Store current date in PICKDTE2

Skip instructions:

<1> go to END_PICKUP

<2> go to RFRN_PK2

<3> go to TPAS_PK2

* Enter TYPE A noninterview:

  1. No one home

  2. Refused

  3. Other Type A – specify

Special instructions:

  1. If TYPA_PK2 is 1 then store 216 in PICK_UP2

If TYPA_PK2 is 3 then store 219 in PICK_UP2

  1. Store current date in PICKDTE2

Skip instructions:

<1> go to END_PICKUP

<2> go to RFRN_PK2

<3> go to TPAS_PK2

Coverage

TYPC_PK2

  • New response option fill based on QTYPE for Web Diary Feasibility Test

  • Fix specs on skip instructions

* Enter TYPE C noninterview

  1. Demolished

  2. House or Mobile Home moved

  3. Converted to permanent nonresidential use

  4. Merged with units in the same structure

  5. Condemned

  6. Located on military base (post)

  7. Unused serial # on listing sheet

  8. CU Moved

  9. CU merge

  10. Spawn in err

  11. Removed during subsampling

  12. Unit already had a chance of selection

  13. Other Type C – specify

Special instructions:

  1. If TYPC_PK2 is 10 then store 290 in PICK_UP2

If TYPC_PK2 is 1 then store 240 in PICK_UP2

If TYPC_PK2 is 2 then store 241 in PICK_UP2

If TYPC_PK2 is 3 then store 243 in PICK_UP2

If TYPC_PK2 is 4 then store 244 in PICK_UP2

If TYPC_PK2 is 5 then store 245 in PICK_UP2

If TYPC_PK2 is 6 then store 252 in PICK_UP2

If TYPC_PK2 is 7 then store 247 in PICK_UP2

If TYPC_PK2 is 8 then store 341 in PICK_UP2

If TYPC_PK2 is 9 then store 342 in PICK_UP2

If TYPC_PK2 is 11 then store 256 in PICK_UP2

If TYPC_PK2 is 12 then store 257 in PICK_UP2

If TYPC_PK2 is 13 then store 248 in PICK_UP2

  1. Store current date in PICKDTE2

Skip instructions:

<0-9> go to BYOBS_PK2

<10> go to TPCS_PK2

* Enter TYPE C noninterview

  1. Demolished

  2. House or Mobile Home moved

  3. Converted to permanent nonresidential use

  4. Merged with units in the same structure

  5. Condemned

  6. Located on military base (post)

  7. Unused serial # on listing sheet

  8. CU Moved

  9. CU merge

  10. Spawn in err

  11. Removed during subsampling

  12. Unit already had a chance of selection

  13. Other Type C – specify

  14. ^Q_TYPC_PK2

  15. ^Q2_TYPC_PK2

Q_TYPC_PK2 fill instructions:

If QTYPE=1 fill “14. Web Diary spawn” else leave blank

Q2_TYPC_PK2 fill instructions:

If QTYPE=1 fill “15. Web Diary language barrier” else leave blank

Special instructions:

  1. If TYPC_PK2 is 10 then store 290 in PICK_UP2

If TYPC_PK2 is 1 then store 240 in PICK_UP2

If TYPC_PK2 is 2 then store 241 in PICK_UP2

If TYPC_PK2 is 3 then store 243 in PICK_UP2

If TYPC_PK2 is 4 then store 244 in PICK_UP2

If TYPC_PK2 is 5 then store 245 in PICK_UP2

If TYPC_PK2 is 6 then store 252 in PICK_UP2

If TYPC_PK2 is 7 then store 247 in PICK_UP2

If TYPC_PK2 is 8 then store 341 in PICK_UP2

If TYPC_PK2 is 9 then store 342 in PICK_UP2

If TYPC_PK2 is 11 then store 256 in PICK_UP2

If TYPC_PK2 is 12 then store 257 in PICK_UP2

If TYPC_PK2 is 13 then store 248 in PICK_UP2

If TYPC_PK2 is 14 then store 291 in PICK_UP2

If TYPC_PK2 is 15 then store 327 in PICK_UP2

  1. Store current date in PICKDTE2

Skip instructions:

<1-12, 14-15> go to BYOBS_PK2

<13> go to TPCS_PK2

Coverage

UNITQ

Change skip instructions due to new screener questions for the Web Diary test

* Ask if not apparent

How many housing units, both occupied and vacant, are there in this structure?

  1. Only Group Quarters units

  2. Mobile home or trailer

  3. One, detached

  4. One, attached

  5. 2

  6. 3-4

  7. 5-9

  8. 10-19

  9. 20-49

  10. 50 or more

Skip instructions:

<1-10> go to END_COVERAGE

* Ask if not apparent

How many housing units, both occupied and vacant, are there in this structure?

  1. Only Group Quarters units

  2. Mobile home or trailer

  3. One, detached

  4. One, attached

  5. 2

  6. 3-4

  7. 5-9

  8. 10-19

  9. 20-49

  10. 50 or more

Skip instructions:

<1-10> if INTPER=201210, 201211, 201212, 201213, 201214, or 201215 go to HM_NET

Else go to END_COVERAGE

Coverage

HM_NET

New question for BOTH production and web diary test samples for interview periods 201210, 201211, and 201212.

N/A

Does this household have internet access at home?

* Internet access via mobile phone also applies.

  1. Yes

  2. No

Store instructions:

If QTYPE=1 and HM_NET=2, D, or R store 249 in INSTAT1 and PICK_UP1

Skip instructions:

<1> go to EM_ACCS

<2, D, R> if QTYPE=1 go to THANK_W1 else go to END_COVERAGE

Coverage

EM_ACCS

New question for BOTH production and web diary test samples for interview periods 201210, 201211, and 201212.

N/A

Is this through –

* Enter all that apply, separate with commas

  1. A personal computer?

  2. A tablet?

  3. A mobile phone?

Store instructions:

If QTYPE=1 and EM_ACCS=3 store 249 in INSTAT1 and PICK_UP1

Skip instructions:

<1-3, D, R> if (QTYPE=1 AND ENTRY = 3 ONLY) go to THANK_W1 else go to END_COVERAGE



Section 1 changes

DIARY Section

DIARY CAPI Variable

Change Detail

201201 CEQ CAPI Wording/Specification

201210 (Web Diary Test) Wording/Specification

1

CONSUMER_UNITS

Create a fill with instructions on what to do with additional CUs based on QTYPE due to the Web Diary Feasibility Test

* HOUSEHOLD MEMBERS BROKEN INTO APPROPRIATE CU’s

[Fill: TOTAL_CU] have been determined

  1. Enter 1 to continue

Special instructions:

After CU(s) established, store number of persons in current CU in variable NUMHOUSE (for the case). Set ROSTERINFO = "Yes"

Skip instructions:

<1> go to CU_INTRO

* HOUSEHOLD MEMBERS BROKEN INTO APPROPRIATE CU’s

[Fill: TOTAL_CU] have been determined

^Q_CONSUMER_UNITS

  1. Enter 1 to continue

Q_CONSUMER_UNITS Fill instructions:

If QTYPE=1 fill “* This is a WEB DIARY case. Be sure to interview only CU 01. Any additional CUs should be coded as “Type C – Web Diary Spawn” in Case Management.” Else leave blank.

Special instructions:

After CU(s) established, store number of persons in current CU in variable NUMHOUSE (for the case). Set ROSTERINFO = "Yes"

Skip instructions:

<1> go to CU_INTRO

1

CU_INTRO

Create fill based on QTYPE due to Web Diary Feasibility Test

* Read if necessary:

During this interview, I will refer to the [fill: person/people] on your list. [If household has more than one CU, fill: This is the person or group of related people in this house who are independent of everyone else in the household for payment of their major expenses.]

[Fill: CU list]

* Transcribe the name(s) to the Diary

  1. Enter 1 to continue

Special instructions:

  1. For the next table/grid, gray the rows for persons not in this CU (persons whose CUNUMBER does not equal (I_CU 1 or REPLACE=1 or NEWCU is 1 AND NEWUNIT is not S)), and for persons with HH_MEM=2 or PERSTAT=99 or NONMEMB=1

Skip instructions:

<1> go to AGE

* Read if necessary:

During this interview, I will refer to the [fill: person/people] on your list. [If household has more than one CU, fill: This is the person or group of related people in this house who are independent of everyone else in the household for payment of their major expenses.]

[Fill: CU list]

* Transcribe the name(s) to the ^Q_CU_INTRO

  1. Enter 1 to continue

Fill instructions:

Q_CU_INTRO fill instructions:

If QTYPE=1, fill “Web Diary user guide” else fill “Diary

Special instructions:

  1. For the next table/grid, gray the rows for persons not in this CU (persons whose CUNUMBER does not equal (I_CU 1 or REPLACE=1 or NEWCU is 1 AND NEWUNIT is not S)), and for persons with HH_MEM=2 or PERSTAT=99 or NONMEMB=1

Skip instructions:

<1> go to AGE

1

MEMAWYW1

Create fills based on QTYPE due to Web Diary Feasibility Test

(Week 1 Pickup)

Were ^YOU_ANY away overnight for one day or more last week (during the diary reference period)?

  1. Yes

  2. No

Skip instructions:

<1, 2, D, R> go to GUESTSW1

^Q1_MEMAWYW1

Were ^YOU_ANY away overnight for one day or more ^Q2_MEMAWYW1?

  1. Yes

  2. No

Q1_MEMAWYW1 Fill instructions:

If QTYPE ne 1 fill “(Week 1 Pickup)” else leave blank

Q2_MEMAWYW1 Fill instructions:

If QTYPE=1 fill “during the first week (of the diary reference period)” else fill “last week (during the diary reference period)”

Skip instructions:

<1, 2, D, R> go to GUESTSW1

1

GUESTSW1

  • Create fill based on QTYPE due to Web Diary Feasibility Test

  • Fix skip instructions (I believe if there is double placement, it should be going to MEMAWYW2, not SEC01FLG)

Did anyone else, such as visitors, stay overnight for one day or more last week (during the diary reference period)?

Skip instructions:

<1, 2, D, R> go to SEC01FLG

Did anyone else, such as visitors, stay overnight for one day or more ^Q_GUESTSW1?

Q_GUESTSW1 Fill instructions:

If QTYPE=1 fill “during the first week of the diary reference period” else fill “last week (during the diary reference period)”

Skip instructions:

<1, 2, D, R> if VISITNUM=3 and DPLC_CHK=1 go to MEMAWYW2 else go to SEC01FLG

1

MEMAWYW2

Create fills based on QTYPE due to Web Diary Feasibility Test

(Week 2 Pickup)

Were ^YOU_ANY away overnight for one day or more last week (during the diary reference period)?

  1. Yes

  2. No

Skip instructions:

<1, 2, D, R> go to GUESTSW2

^Q1_MEMAWYW2

Were ^YOU_ANY away overnight for one day or more ^Q2_MEMAWYW2?

  1. Yes

  2. No

Q1_MEMAWYW2 Fill instructions:

If QTYPE ne 1 fill “(Week 2 Pickup)” else leave blank

Q2_MEMAWYW2 Fill instructions:

If QTYPE=1 fill “during the second week (of the diary reference period)” else fill “last week (during the diary reference period)”

Skip instructions:

<1, 2, D, R> go to GUESTSW2

1

GUESTSW2

Create fill based on QTYPE due to Web Diary Feasibility Test

Did anyone else, such as visitors, stay overnight for one day or more last week (during the diary reference period)?

Skip instructions:

<1, 2, D, R> go to SEC01FLG

Did anyone else, such as visitors, stay overnight for one day or more ^Q_GUESTSW2?

Q_GUESTSW2 Fill instructions:

If QTYPE=1 fill “during the second week of the diary reference period” else fill “last week (during the diary reference period)”

Skip instructions:

<1, 2, D, R> go to SEC01FLG



Section 4A changes

DIARY Section

DIARY CAPI Variable

Change Detail

201201 CEQ CAPI Wording/Specification

201210 (Web Diary Test) Wording/Specification

04A

FOUR_CK

Create a fill for response item #2 based on QTYPE due to the Web Diary Feasibility Test

* This is the normal end of the first visit. The income questions are normally asked at the final visit, but you may continue with those questions now if needed.

  1. Continue with income

  2. Place diary

Skip instructions:

<1> go to FOUR_RS

<2> go to AFTERMID

* This is the normal end of the first visit. The income questions are normally asked at the final visit, but you may continue with those questions now if needed.

  1. Continue with income

  2. ^Q_FOUR_CK

Q_FOUR_CK Fill instructions:

If QTYPE=1 fill “Place Web Diary” else fill “Place diary”

Skip instructions:

<1> go to FOUR_RS

<2> go to AFTERMID



Back section changes

DIARY Section

DIARY CAPI Variable

Change Detail

201201 CEQ CAPI Wording/Specification

201210 (Web Diary Test) Wording/Specification

BACK

UPDATED

WK1_ST1

UPDATED 10/1/12

  • Change the current question to a fill based on QTYPE due to the Web Diary feasibility test

  • New skip and special instructions for QTYPE=1

Instruct the respondent on how to complete the Week 1 Diary, and attempt to leave the Diary form with the respondent.

RO PSU Seg No Seg. Suffix Sample Design Serial No. Serial Suffix HH No. CU No. Spinoff Ind Week

---------------------------------------------------------------------------------

SITE (1-5) (6-9) (10) (11-14) (15-16) (17-18) (19) (20-21) (22-23) 01

Was the Week 1 Diary placed?

  1. Yes

  2. No

Skip instructions:

<1> go to DPLC_CK1

<2> go to NTYPE_W1

^Q1_WK1_ST1

RO PSU Seg No Seg. Suffix Sample Design Serial No. Serial Suffix HH No. CU No. Spinoff Ind Week

---------------------------------------------------------------------------------

SITE (1-5) (6-9) (10) (11-14) (15-16) (17-18) (19) (20-21) (22-23) 01

^Q2_WK1_ST1

  1. Yes

  2. No

Q1_WK1_ST1 fill instructions:

If QTYPE=1 fill “This is a WEB DIARY case. Instruct the respondent on how to use the Web Diary and provide the respondent with the user guide.” Else fill “Instruct the respondent on how to complete the Week 1 Diary, and attempt to leave the Diary form with the respondent.

Q2_WK1_ST1 fill intructions:

If QTYPE=1 fill “Did the respondent agree to complete the Web Diary?” Else fill “Was the Week 1 Diary placed?

Special instructions:

If QTYPE=1 set DPLC_CK1=2, DPLC_CHK=1, DPLCRES=8, and DPLCSPC=”Web Diary”

Skip instructions:

<1> if QTYPE=1 and go to go to THANK_W1

else go to DPLC_WK1

<2> go to NTYPE_W1

BACK

NTYPE_W1

  • Add fill for “Web Diary Language Barrier” based on QTYPE as a Type A example

  • Fix typo in specs for response option 3 (“TYPE Q” should be “TYPE C”

What type of non-interview do you have?

Type A = No one home, Refusal

Type B = Temporarily absent, Vacant, under construction, occupied by persons with URE

Type C = Demolished, House moved, Merged, Condemned, Located on base, CU moved

  1. TYPE A

  2. TYPE B

  3. TYPE Q

Skip instructions:

<1> go to TYPEA_W1

<2> go to TYPEB_W1

<3> go to TYPEC_W1

What type of non-interview do you have?

Type A = No one home, Refusal ^Q_NTYPE_W1

Type B = Temporarily absent, Vacant, under construction, occupied by persons with URE

Type C = Demolished, House moved, Merged, Condemned, Located on base, CU moved

  1. TYPE A

  2. TYPE B

  3. TYPE Q

Q_NTYPE_W1 fill instructions:

If QTYPE=1 fill “, Web Diary Language Barrier” else leave blank.

Skip instructions:

<1> go to TYPEA_W1

<2> go to TYPEB_W1

<3> go to TYPEC_W1

BACK

TYPEA_W1

  • New response option fill based on QTYPE for Web Diary Feasibility Test

  • New special instructions based on QTYPE for Web Diary Feasibility Test

Enter TYPE A noninterview:

  1. No one home

  2. Refused

  3. Other Type A – specify

Special instructions:

  1. If TYPEA_WK1 is 1 then store 216 in INSTAT1 and PICK_UP1.

If TYPEA_WK1 is 3 then store 219 in INSTAT1 and PICK_UP1

  1. Store current date in PLCEDAT1

  2. Store current date in PICKDTE1

Skip instructions:

<1> go to RACRF_W1

<2> go to RFRSN_W1

<3> go to TYPAS_W1

Enter TYPE A noninterview:

  1. No one home

  2. Refused

  3. Other Type A – specify

  4. ^Q_TYPEA_W1

Q_TYPEA_W1 fill instructions:

If QTYPE=1 fill “4. Web Diary Language Barrier” else leave blank.

Special instructions:

  1. If TYPEA_WK1 is 1 then store 216 in INSTAT1 and PICK_UP1.

If TYPEA_WK1 is 3 then store 219 in INSTAT1 and PICK_UP1

  1. Store current date in PLCEDAT1

  2. Store current date in PICKDTE1

  3. If QTYPE=1 store current date in PLCEDAT2

  4. If TYPEA_WK1 is 4 then store 327 in INSTAT1, PICK_UP1, INSTAT2, and PICK_UP2.

Skip instructions:

<1, 4> go to RACRF_W1

<2> go to RFRSN_W1

<3> go to TYPAS_W1

BACK

TYPEC_W1

  • New response option fill based on QTYPE for Web Diary Feasibility Test

  • Fix specs on skip instructions

* Enter TYPE C noninterview

  1. Demolished

  2. House or Mobile Home moved

  3. Converted to permanent nonresidential use

  4. Merged with units in the same structure

  5. Condemned

  6. Located on military base (post)

  7. Unused serial # on listing sheet

  8. CU Moved

  9. ^TYPECMRGE

  10. ^TYPECSPWN

  11. Removed during subsampling

  12. Unit already had a chance of selection

  13. Other Type C – specify

Special instructions:

  1. If TYPEC_W1 is 10 then store 290 in INSTAT1 and PICK_UP1

If TYPEC_W1 is 1 then store 240 in INSTAT1 and PICK_UP1

If TYPEC_W1 is 2 then store 241 in INSTAT1 and PICK_UP1

If TYPEC_W1 is 3 then store 243 in INSTAT1 and PICK_UP1

If TYPEC_W1 is 4 then store 244 in INSTAT1 and PICK_UP1

If TYPEC_W1 is 5 then store 245 in INSTAT1 and PICK_UP1

If TYPEC_W1 is 6 then store 252 in INSTAT1 and PICK_UP1

If TYPEC_W1 is 7 then store 247 in INSTAT1 and PICK_UP1

If TYPEC_W1 is 8 then store 341 in INSTAT1 and PICK_UP1

If TYPEC_W1 is 11 then store 256 in INSTAT1 and PICK_UP1

If TYPEC_W1 is 12 then store 257 in INSTAT1 and PICK_UP1

If TYPEC_W1 is 13 then store 248 in INSTAT1 and PICK_UP1

  1. Store current date in PLCEDAT1

  2. Store INSTAT1 in PICK_UP1, INSTAT2, and PICK_UP2

Store current date in PICKDTE1, PLCEDAT2, and PICKDTE2

Skip instructions:

<0-9> go to BYOBS_W1

<10> go to TYPCS_W1

* Enter TYPE C noninterview

  1. Demolished

  2. House or Mobile Home moved

  3. Converted to permanent nonresidential use

  4. Merged with units in the same structure

  5. Condemned

  6. Located on military base (post)

  7. Unused serial # on listing sheet

  8. CU Moved

  9. ^TYPECMRGE

  10. ^TYPECSPWN

  11. Removed during subsampling

  12. Unit already had a chance of selection

  13. Other Type C – specify

  14. ^Q_TYPEC_W1

Q_TYPEC_W1 fill instructions:

If QTYPE=1 fill “14. Web Diary spawn” else leave blank

Special instructions:

  1. If TYPEC_W1 is 10 then store 290 in INSTAT1 and PICK_UP1

If TYPEC_W1 is 1 then store 240 in INSTAT1 and PICK_UP1

If TYPEC_W1 is 2 then store 241 in INSTAT1 and PICK_UP1

If TYPEC_W1 is 3 then store 243 in INSTAT1 and PICK_UP1

If TYPEC_W1 is 4 then store 244 in INSTAT1 and PICK_UP1

If TYPEC_W1 is 5 then store 245 in INSTAT1 and PICK_UP1

If TYPEC_W1 is 6 then store 252 in INSTAT1 and PICK_UP1

If TYPEC_W1 is 7 then store 247 in INSTAT1 and PICK_UP1

If TYPEC_W1 is 8 then store 341 in INSTAT1 and PICK_UP1

If TYPEC_W1 is 11 then store 256 in INSTAT1 and PICK_UP1

If TYPEC_W1 is 12 then store 257 in INSTAT1 and PICK_UP1

If TYPEC_W1 is 13 then store 248 in INSTAT1 and PICK_UP1

If TYPEC_W1 is 14 then store 291 in INTSTAT1 and PICK_UP1

  1. Store current date in PLCEDAT1

  2. Store INSTAT1 in PICK_UP1, INSTAT2, and PICK_UP2

Store current date in PICKDTE1, PLCEDAT2, and PICKDTE2

Skip instructions:

<1-12, 14> go to BYOBS_W1

<13> go to TYPCS_W1

BACK

RACRF_W1

Fix skip instruction specs

Race of individual

  1. White

  2. Black or African American

  3. American Indian or Alaska Native

  4. Asian

  5. Native Hawaiian

  6. Guamanian or Chamorro

  7. Samoan

  8. Other Pacific Islander

Skip instructions:

<1-5, D> go to HH_MM_W1

Race of individual

  1. White

  2. Black or African American

  3. American Indian or Alaska Native

  4. Asian

  5. Native Hawaiian

  6. Guamanian or Chamorro

  7. Samoan

  8. Other Pacific Islander

Skip instructions:

<1-8, D> go to HH_MM_W1

BACK

WK2_ST2

  • Change the current question to a fill based on QTYPE due to the Web Diary feasibility test

  • New skip and store instructions for QTYPE=1

Instruct the respondent on how to complete the Week 2 Diary, and attempt to leave the Diary form with the respondent.

RO PSU Seg No Seg. Suffix Sample Design Serial No. Serial Suffix HH No. CU No. Spinoff Ind Week

---------------------------------------------------------------------------------

SITE (1-5) (6-9) (10) (11-14) (15-16) (17-18) (19) (20-21) (22-23) 01

Was the Week 2 Diary placed?

  1. Yes

  2. No

Skip instructions:

<1> go to THANK_W1

<2> go to NTYPE_W2

^Q1_WK2_ST2

RO PSU Seg No Seg. Suffix Sample Design Serial No. Serial Suffix HH No. CU No. Spinoff Ind Week

---------------------------------------------------------------------------------

SITE (1-5) (6-9) (10) (11-14) (15-16) (17-18) (19) (20-21) (22-23) 01

^Q2_WK1_ST1

  1. Yes

  2. No

Q1_WK2_ST2 fill instructions:

If QTYPE=1 fill “This is a WEB DIARY case. Instruct the respondent on how to use the Web Diary and provide the respondent with the user guide.” Else fill “Instruct the respondent on how to complete the Week 2 Diary, and attempt to leave the Diary form with the respondent.

Q2_WK2_ST2 fill sintructions:

If QTYPE=1 fill “Did the respondent agree to complete the Web Diary?” Else fill “Was the Week 2 Diary placed?

Skip instructions:

<1> go to THANK_W1

<2> go to NTYPE_W2

BACK

NTYPE_W2

  • Add fill for “Web Diary Language Barrier” based on QTYPE as a Type A example

  • Fix typo in specs for response option 3 (“TYPE Q” should be “TYPE C”

What type of non-interview do you have?

Type A = No one home, Refusal

Type B = Temporarily absent, Vacant, under construction, occupied by persons with URE

Type C = Demolished, House moved, Merged, Condemned, Located on base, CU moved

  1. TYPE A

  2. TYPE B

  3. TYPE Q

Skip instructions:

<1> go to TYPEA_W2

<2> go to TYPEB_W2

<3> go to TYPEC_W2

What type of non-interview do you have?

Type A = No one home, Refusal ^Q_NTYPE_W2

Type B = Temporarily absent, Vacant, under construction, occupied by persons with URE

Type C = Demolished, House moved, Merged, Condemned, Located on base, CU moved

  1. TYPE A

  2. TYPE B

  3. TYPE Q

Q_NTYPE_W2 fill instructions:

If QTYPE=1 fill “, Web Diary Language Barrier” else leave blank.

Skip instructions:

<1> go to TYPEA_W2

<2> go to TYPEB_W2

<3> go to TYPEC_W2

BACK

TYPEA_W2

  • New response option fill based on QTYPE for Web Diary Feasibility Test

  • New special instructions based on QTYPE for Web Diary Feasibility Test

Enter TYPE A noninterview:

  1. No one home

  2. Refused

  3. Other Type A – specify

Special instructions:

  1. If TYPEA_WK2 is 1 then store 216 in INSTAT2 and PICK_UP2.

If TYPEA_WK2 is 3 then store 219 in INSTAT2 and PICK_UP2

  1. Store current date in PLCEDAT2

  2. Store current date in PICKDTE2

Skip instructions:

<1> go to RACRF_W2

<2> go to RFRSN_W2

<3> go to TYPAS_W2

Enter TYPE A noninterview:

  1. No one home

  2. Refused

  3. Other Type A – specify

  4. ^Q_TYPEA_W2

Q_TYPEA_W1 fill instructions:

If QTYPE=2 fill “4. Web Diary Language Barrier” else leave blank.

Special instructions:

  1. If TYPEA_WK2 is 1 then store 216 in INSTAT2 and PICK_UP2.

If TYPEA_WK2 is 3 then store 219 in INSTAT2 and PICK_UP2

  1. Store current date in PLCEDAT2

  2. Store current date in PICKDTE2

  3. If TYPEA_WK1 is 4 then store 327 in INSTAT1 and PICK_UP1.

Skip instructions:

<1, 4> go to RACRF_W2

<2> go to RFRSN_W2

<3> go to TYPAS_W2

BACK

TYPEC_W2

  • New response option fill based on QTYPE for Web Diary Feasibility Test

  • Fix specs on skip instructions

* Enter TYPE C noninterview

  1. Demolished

  2. House or Mobile Home moved

  3. Converted to permanent nonresidential use

  4. Merged with units in the same structure

  5. Condemned

  6. Located on military base (post)

  7. Unused serial # on listing sheet

  8. CU Moved

  9. ^TYPECMRGE

  10. ^TYPECSPWN

  11. Removed during subsampling

  12. Unit already had a chance of selection

  13. Other Type C – specify

Special instructions:

  1. If TYPEC_W2 is 10 then store 290 in INSTAT2 and PICK_UP2

If TYPEC_W2 is 1 then store 240 in INSTAT2 and PICK_UP2

If TYPEC_W2 is 2 then store 241 in INSTAT2 and PICK_UP2

If TYPEC_W2 is 3 then store 243 in INSTAT2 and PICK_UP2

If TYPEC_W2 is 4 then store 244 in INSTAT2 and PICK_UP2

If TYPEC_W2 is 5 then store 245 in INSTAT2 and PICK_UP2

If TYPEC_W2 is 6 then store 252 in INSTAT2 and PICK_UP2

If TYPEC_W2 is 7 then store 247 in INSTAT2 and PICK_UP2

If TYPEC_W2 is 8 then store 341 in INSTAT2 and PICK_UP2

If TYPEC_W2 is 11 then store 256 in INSTAT2 and PICK_UP2

If TYPEC_W2 is 12 then store 257 in INSTAT2 and PICK_UP2

If TYPEC_W2 is 13 then store 248 in INSTAT2 and PICK_UP2

  1. Store current date in PLCEDAT2

  2. Store current date in PICKDTE2

Skip instructions:

<0-9> go to BYOBS_W2

<10> go to TYPCS_W2

* Enter TYPE C noninterview

  1. Demolished

  2. House or Mobile Home moved

  3. Converted to permanent nonresidential use

  4. Merged with units in the same structure

  5. Condemned

  6. Located on military base (post)

  7. Unused serial # on listing sheet

  8. CU Moved

  9. ^TYPECMRGE

  10. ^TYPECSPWN

  11. Removed during subsampling

  12. Unit already had a chance of selection

  13. Other Type C – specify

  14. ^Q_TYPEC_W2

Q_TYPEC_W2 fill instructions:

If QTYPE=1 fill “14. Web Diary spawn” else leave blank

Special instructions:

  1. If TYPEC_W2 is 10 then store 290 in INSTAT2 and PICK_UP2

If TYPEC_W2 is 1 then store 240 in INSTAT2 and PICK_UP2

If TYPEC_W2 is 2 then store 241 in INSTAT2 and PICK_UP2

If TYPEC_W2 is 3 then store 243 in INSTAT2 and PICK_UP2

If TYPEC_W2 is 4 then store 244 in INSTAT2 and PICK_UP2

If TYPEC_W2 is 5 then store 245 in INSTAT2 and PICK_UP2

If TYPEC_W2 is 6 then store 252 in INSTAT2 and PICK_UP2

If TYPEC_W2 is 7 then store 247 in INSTAT2 and PICK_UP2

If TYPEC_W2 is 8 then store 341 in INSTAT2 and PICK_UP2

If TYPEC_W2 is 11 then store 256 in INSTAT2 and PICK_UP2

If TYPEC_W2 is 12 then store 257 in INSTAT2 and PICK_UP2

If TYPEC_W2 is 13 then store 248 in INSTAT2 and PICK_UP2

If TYPEC_W2 is 14 then store 291 in INTSTAT2 and PICK_UP2

  1. Store current date in PLCEDAT2

  2. Store current date in PICKDTE2

Skip instructions:

<1-12, 14> go to BYOBS_W2

<13> go to TYPCS_W2

BACK

THANK_W1

Update fill instructions based on QTYPE to accommodate

^THANKW11

^THANKWK2

Thank you.

^THANKWK3 ^THANKWK4 ^THANKW5

[fill: 2. Select another date]

  1. Enter 1 to continue

THANKW11 Fill instructions:

If VISITNUM=1 and INSTAT1=201, then fill “Instruct respondent to begin filling out the diary tomorrow.

If VISITNUM=2 and INSTAT1 ne 201 or 341 and INSTAT2=201, then fill “Instruct respondent to being filling out the diary tomorrow.

If VISITNUM=2 and INSTAT1=201 or 341 and INSTAT2=201, then fill “Instruct the respondent to begin filling out the diary today.

Else leave blank.

THANKWK2 Fill instructions

If VISITNUM=1 and INSTAT1=201, then fill “Week 1 Pickup Date: PLCEDAT1+8

If VISITNUM=1 and INSTAT1=201 AND DPLC_CHK=1, then fill “Double Placement – Week 1 Pickup [fill: PLCEDAT1+8] Double Placement – Week 2 Pickup {fill: PLCEDAT1+15]

If VISITNUM=2 and (INSTAT1 ne 201 or 341) and INSTAT2=201, then fill “Week 2 Pickup Date: PLCEDAT2+8

If VISITNUM=2 and (INSTAT1=201 or 341) and INSTAT2=201, then fill “Week 2 Pickup Date: PLCEDAT1+15

Else leave blank

THANKWK3 Fill instructions:

If VISITNUM=1 and INSTAT=201, fill “I will return on PLCEDAT1+8 to pick up”

If VISITNUM=1 and INSTAT1=201 AND DPLC_CHK=1, fill “I will return on PLCEDAT1+15 to pick up”

If VISITNUM=2 and (INSTAT1 ne 201 or 341) and INSTAT2=201, then fill “I will return on PLCEDAT2+8 to pick up”

If VISITNUM=2 and (INSTAT1= 201 or 341) and INSTAT2=201, then fill “I will return on PLCEDAT1+15 to pick up”

Else leave blank.

THANKWK4 Fill instructions:

If (VISITNUM=1 and INSTAT1=201 and DPLC_CHK ne 1) or (VISITNUM=2 and INSTAT2=201), then fill “the Diary and”

If VISITNUM=1 and INSTAT1=201 and DPLC_CHK=1, then fill “both Diaries and”

Else leave blank.

THANKWK5

If (VISITNUM=1 and INSTAT1=201 and DPLC_CHK=1) or (VISITNUM=2 and INSTAT2=201), then fill “complete the interview.”

If (VISITNUM=1 and INSTAT1=201 and DPLC_CHK ne 1), then fill “continue the interview.”

Else leave blank.

Skip instructions:

<1> if INSTAT ne 201, go to DONE

Else if INSTAT1=201, go to BSTTI

Else if INSTAT2=201, go to BSTTI

<2> go to APPTOTH

^THANKW11

^THANKWK2

Thank you.

^THANKWK3 ^THANKWK4 ^THANKW5 ^THANKWD

[fill: 2. Select another date]

  1. Enter 1 to continue

THANKW11 Fill instructions:

If VISITNUM=1 and INSTAT1=201, then fill “Instruct respondent to begin filling out the diary tomorrow.

If VISITNUM=2 and INSTAT1 ne 201 or 341 and INSTAT2=201, then fill “Instruct respondent to being filling out the diary tomorrow.

If VISITNUM=2 and INSTAT1=201 or 341 and INSTAT2=201, then fill “Instruct the respondent to begin filling out the diary today.

Else leave blank.

THANKWK2 Fill instructions

If QTYPE=1 and VISITNUM=1 and INSTAT1=201, then fill “Web Diary Pickup Date: PLCEDAT1+15

If QTYPE=1 and VISITNUM=2 and (INSTAT1 ne 201 or 341) and INSTAT2=201, then fill “Web Diary Pickup Date: PLCEDAT2+8

If QTYPE ne 1 and VISITNUM=1 and INSTAT1=201, then fill “Week 1 Pickup Date: PLCEDAT1+8

If QTYPE ne 1 and VISITNUM=1 and INSTAT1=201 AND DPLC_CHK=1, then fill “Double Placement – Week 1 Pickup [fill: PLCEDAT1+8] Double Placement – Week 2 Pickup {fill: PLCEDAT1+15]

If QTYPE ne 1 and VISITNUM=2 and (INSTAT1 ne 201 or 341) and INSTAT2=201, then fill “Week 2 Pickup Date: PLCEDAT2+8

If QTYPE ne 1 and VISITNUM=2 and (INSTAT1=201 or 341) and INSTAT2=201, then fill “Week 2 Pickup Date: PLCEDAT1+15

Else leave blank

THANKWK3 Fill instructions:

If QTYPE ne 1 and VISITNUM=1 and INSTAT=201, fill “I will return on PLCEDAT1+8 to pick up”

If QTYPE ne 1 and VISITNUM=1 and INSTAT1=201 AND DPLC_CHK=1, fill “I will return on PLCEDAT1+15 to pick up”

If QTYPE ne 1 and VISITNUM=2 and (INSTAT1 ne 201 or 341) and INSTAT2=201, then fill “I will return on PLCEDAT2+8 to pick up”

If QTYPE ne 1 and VISITNUM=2 and (INSTAT1= 201 or 341) and INSTAT2=201, then fill “I will return on PLCEDAT1+15 to pick up”

Else leave blank.

THANKWK4 Fill instructions:

If (QTYPE ne 1 and VISITNUM=1 and INSTAT1=201 and DPLC_CHK ne 1) or (QTYPE ne 1 and VISITNUM=2 and INSTAT2=201), then fill “the Diary and”

If QTYPE ne 1 and VISITNUM=1 and INSTAT1=201 and DPLC_CHK=1, then fill “both Diaries and”

Else leave blank.

THANKWK5 Fill instructions:

If (QTYPE ne 1 and VISITNUM=1 and INSTAT1=201 and DPLC_CHK=1) or (QTYPE ne 1 and VISITNUM=2 and INSTAT2=201), then fill “complete the interview.”

If (QTYPE ne 1 and VISITNUM=1 and INSTAT1=201 and DPLC_CHK ne 1), then fill “continue the interview.”

Else leave blank.

THANKWD Fill instructions:

If QTYPE=1 and VISITNUM=1 and INSTAT1=201, fill “I will return on PLCEDAT1+15 to complete the interview.”

If QTYPE=1 and VISITNUM=2 and (INSTAT1 ne 201 or 341) and INSTAT2=201, fill “I will return on PLCEDAT1+15 to complete the interview.”

Else leave blank.

Skip instructions:

<1> if INSTAT ne 201, go to DONE

Else if INSTAT1=201, go to BSTTI

Else if INSTAT2=201, go to BSTTI

<2> go to APPTOTH

BACK

WD_INTRO

New questions for web diary test sample ONLY (QTYPE=1) that should be asked of completed interviews (201) at the end of VISITNUM=3 but before THANKYOU.

N/A

We’re almost done with the survey. I just have a few questions before we wrap up.

  1. Enter 1 to continue

Skip instructions:

<1> go to WD_R1

BACK

WD_R1

New questions for web diary test sample ONLY (QTYPE=1) that should be asked of completed interviews (201) at the end of VISITNUM=3 but before THANKYOU.

N/A

What did you like about thi web diary?

Value/skip instructions:

<150 characters, D, R> go to WD_R2

BACK

WD_R2

New questions for web diary test sample ONLY (QTYPE=1) that should be asked of completed interviews (201) at the end of VISITNUM=3 but before THANKYOU.

N/A

How easy or difficult was it to log in? Would you say –

  1. Very easy?

  2. Easy?

  3. Neither easy nor difficult?

  4. Difficult?

  5. Very difficult?

Skip instructions:

<1-5, D, R> go to WD_R3

BACK

WD_R3

New questions for web diary test sample ONLY (QTYPE=1) that should be asked of completed interviews (201) at the end of VISITNUM=3 but before THANKYOU.

N/A

How easy or difficult was it to record your expenses? Would you say –

  1. Very easy?

  2. Easy?

  3. Neither easy nor difficult?

  4. Difficult?

  5. Very difficult?

Skip instructions:

<1-5, D, R> go to WD_R4

BACK

WD_R4

New questions for web diary test sample ONLY (QTYPE=1) that should be asked of completed interviews (201) at the end of VISITNUM=3 but before THANKYOU.

N/A

Did you use any records or online statements when recording your expenses?

  1. Yes

  2. No

Skip instructions:

<1, 2, D, R> go to WD_R5

BACK

WD_R5

New questions for web diary test sample ONLY (QTYPE=1) that should be asked of completed interviews (201) at the end of VISITNUM=3 but before THANKYOU.

N/A

How could we improve the process of recording your expenses?

Value/skip instructions:

<150 characters, D, R> go to WD_R6

BACK

WD_R6

New questions for web diary test sample ONLY (QTYPE=1) that should be asked of completed interviews (201) at the end of VISITNUM=3 but before THANKYOU.

N/A

During our first visit, we provided you with a User’s Guide. Please let me know any changes or suggestions you have for that document.

Value/skip instructions:

<150 characters, D, R> go to WD_R7

BACK

WD_R7

New questions for web diary test sample ONLY (QTYPE=1) that should be asked of completed interviews (201) at the end of VISITNUM=3 but before THANKYOU.

N/A

When using the web diary to record your expenses, how secure do you feel that your data is? Would you say –

  1. Completely secure?

  2. Somewhat secure?

  3. Neither secure nor unsecure?

  4. Somewhat unsecure?

  5. Completely unsecure?

Skip instructions:

<1-5, D, R> go to WD_R8

BACK

WD_R8

New questions for web diary test sample ONLY (QTYPE=1) that should be asked of completed interviews (201) at the end of VISITNUM=3 but before THANKYOU.

N/A

Which internet browser do you typically use at home?

  1. Explorer?

  2. Firefox?

  3. Safari?

  4. Chrome?

  5. Something else?

Skip instructions:

<1-4, D, R> go to WD_R9

<5> go to WD_R8SP

BACK

WD_R8SP

New questions for web diary test sample ONLY (QTYPE=1) that should be asked of completed interviews (201) at the end of VISITNUM=3 but before THANKYOU.

N/A

* Specify:

Value/skip instructions:

<30 characters, D, R> go to WD_R9

BACK

WD_R9

New questions for web diary test sample ONLY (QTYPE=1) that should be asked of completed interviews (201) at the end of VISITNUM=3 but before THANKYOU.

N/A

What operating system does your home computer run on?

  1. Mac OS?

  2. Windows 7?

  3. Windows XP?

  4. Windows Vista?

  5. Something else?

Skip instructions:

<1-4, D, R> go to WD_R10

<5> go to WD_R9SP

BACK

WD_R9SP

New questions for web diary test sample ONLY (QTYPE=1) that should be asked of completed interviews (201) at the end of VISITNUM=3 but before THANKYOU.

N/A

* Specify:

Value/skip instructions:

<30 characters, D, R> go to WD_R10

BACK

WD_R10

New questions for web diary test sample ONLY (QTYPE=1) that should be asked of completed interviews (201) at the end of VISITNUM=3 but before THANKYOU.

N/A

On average, about how many hours do you spend on the Internet per day, including for work or personal use?

  1. 0 hours?

  2. 1-2 hours?

  3. 3-4 hours?

  4. 5-6 hours?

  5. 7-8 hours?

  6. More than 8 hours?

Skip instructions:

<1-6, D, R> go to WD_R11

BACK

WD_R11

New questions for web diary test sample ONLY (QTYPE=1) that should be asked of completed interviews (201) at the end of VISITNUM=3 but before THANKYOU.

N/A

In your opinion, how experienced are you with computers? Would you say –

  1. Very experienced?

  2. Somewhat experienced?

  3. A little experienced?

  4. Not experienced at all?

Skip instructions:

<1-4, D, R> go to WD_R12

BACK

WD_R12

New questions for web diary test sample ONLY (QTYPE=1) that should be asked of completed interviews (201) at the end of VISITNUM=3 but before THANKYOU.

N/A

In your opinion, how experienced are you with using the Internet? Would you say –

  1. Very experienced?

  2. Somewhat experienced?

  3. A little experienced?

  4. Not experienced at all?

Skip instructions:

<1-4, D, R> go to THANKYOU

BACK

THANKYOU

Add fills based on QTYPE due to the Web Diary Feasibility Test

^THANKYOU Thank you for your patience, and for taking the time to answer our questions.

Let me remind you that the information you provide is very valuable because it is used to update the Consumer Price Index, which is one of our nation’s leading economic indicators.

* NOTE: Inform the respondent that a supervisor may call them to conduct re-interview. Explain re-interview as needed.

  1. Enter 1 to continue

Fill instructions:

THANKYOU fill instructions:

  1. If DPLC_CHK=1 and (PICK_UP=201 or PICK_UP2=201), fill, “This concludes the interview.

  2. If DPLC_CHK ne 1 and PICK_UP2=201, fill “This concludes the interview.

  3. Else, fill “Read if necessary. Thank you for your time. You’ve been very helpful.”

Skip instructions:

<1> PICK_UP1=201 or PICK_UP2=201, go to TELPV; else go to NUMCALL

^THANKYOU Thank you for your patience, and for taking the time to answer our questions.

Let me remind you that the information you provide is very valuable because ^Q_THANKYOU.

* NOTE: Inform the respondent that a supervisor may call them to conduct re-interview. Explain re-interview as needed.

^Q2_THANKYOU

  1. Enter 1 to continue

Fill instructions:

THANKYOU fill instructions:

  1. If DPLC_CHK=1 and (PICK_UP=201 or PICK_UP2=201), fill, “This concludes the interview.

  2. If DPLC_CHK ne 1 and PICK_UP2=201, fill “This concludes the interview.

  3. Else, fill “Read if necessary. Thank you for your time. You’ve been very helpful.”

Q_THANKYOU fill instructions:

If QTYPE=1, fill “it will be used to improve the Consumer Expenditure Diary Survey

Else fill “it is used to update the Consumer Price Index, which is one of our nation’s leading economic indicators

Q2_THANKYOU fill instructions:

If QTYPE=1 and (PICKUP1=201 of PICK_UP2=201) then fill “* Hit F10 to enter any receipts/recall expenditures later” else leave blank

Skip instructions:

<1> PICK_UP1=201 or PICK_UP2=201, go to TELPV; else go to NUMCALL

BACK

FR_COOP

  • Change question to a fill based on QTYPE

  • Update skip instructions to accommodate new question for web diary test sample only (QTYPE=1) asked of FRs that will follow FR_COOP for web diary cases.

Was this respondent more cooperative, about the same, or less cooperative than other respondents in keeping the diary?

  1. More cooperative

  2. About the same

  3. Less cooperative

Skip instructions:

<1, 2, 3> go to DONE

^Q_FR_COOP

  1. More cooperative

  2. About the same

  3. Less cooperative

Q_FR_COOP fill instructions:

If QTYPE=1 fill “Was this web diary respondent more cooperative, about the same, or less cooperative than paper diary respondents in terms of recording expenses?

Else fill “Was this respondent more cooperative, about the same, or less cooperative than other respondents in keeping the diary?

Skip instructions:

<1, 2, 3> go to DONE






Page 11 of 11

File Typeapplication/vnd.openxmlformats-officedocument.wordprocessingml.document
Authorbrattland_j
File Modified0000-00-00
File Created2021-01-30

© 2024 OMB.report | Privacy Policy