Drawn Stainless Steel Sinks from China, Inv. No. 701-489 and 731-1201 (F)

INSTRUCTION BOOKLET
GENERAL INFORMATION, INSTRUCTIONS, AND
DEFINITIONS FOR COMMISSION QUESTIONNAIRES

Drawn Stainless Steel Sinks from China
Investigation Nos. 701-TA-489 and 731-TA-1201 (Final)
Further information.--If you have any questions concerning the enclosed
questionnaire(s) or other matters related to this proceeding, you may contact
the following members of the Commission=s staff (Fax 202-205-3205):
Stefania Pozzi Porter, investigator (202-205-3177; E-mail [email protected])
regarding general questions and trade and related information;
David Boyland, auditor (202-708-4725; E-mail [email protected])
regarding financial information;
James Fetzer, economist (202-708-5403; E-mail [email protected])
regarding pricing, market, and related information.

GENERAL INFORMATION
Background.--This proceeding was instituted in response to a petition filed on March 1, 2012, by
Elkay Manufacturing Company, Oak Brook, Illinois. Countervailing and/or antidumping duties may
be assessed on the subject imports as a result of this proceeding if the Commission makes an
affirmative determination of injury, threat, or material retardation, and if the U.S. Department of
Commerce makes an affirmative determination of subsidization and/or dumping.
Questionnaires and other information pertinent to this proceeding are available
at http://www.usitc.gov/trade_remedy/731_ad_701_cvd/investigations/2012/drawn_stainless_
steel_sinks/finalphase.htm . Address all correspondence to the United States International Trade
Commission, Washington, DC 20436. Hearing-impaired individuals can obtain information
regarding this proceeding via the Commission=s TDD terminal (202-205-1810).
Due date of questionnaire(s).--Return the completed questionnaire(s) to the United States
International Trade Commission by no later than DECEMBER 31, 2012. Although the enclosed
postpaid envelope may be used to return the completed questionnaire, use of an overnight mail
service may be necessary to ensure that your response actually reaches the Commission by
DECEMBER 31, 2012. If you do not use the enclosed envelope, please make sure the completed
questionnaire is sent to the attention of STEFANIA POZZI PORTER. Return only one copy of
the completed questionnaire(s), but please keep a copy for your records so that you can refer
to it if the Commission staff contacts you with any questions during the course of the
investigation.
Service of questionnaire response(s).--In the event that your firm is a party to this proceeding, you
are required to serve a copy of the questionnaire(s), once completed, on parties to the proceeding that
are subject to administrative protective order (see 19 CFR ' 207.7). A list of such parties is
maintained by the Commission=s Secretary and may be obtained by calling 202-205-1803. A
certificate of service must accompany the copy of the completed questionnaire(s) you submit (see 19
CFR ' 207.7).
Confidentiality.--The commercial and financial data furnished in response to the enclosed
questionnaire(s) that reveal the individual operations of your firm will be treated as confidential by
the Commission to the extent that such data are not otherwise available to the public and will not be
disclosed except as may be required by law (see 19 U.S.C. ' 1677f). Such confidential information
will not be published in a manner that will reveal the individual operations of your firm; however,
nonnumerical characterizations of numerical business proprietary information (such as discussion of
trends) will be treated as confidential business information only at the request of the submitter for
good cause shown.
Verification.--The information submitted in the enclosed questionnaire(s) is subject to audit
and verification by the Commission. To facilitate possible verification of data, please keep all
of your files, worksheets, and supporting documents used in the preparation of the
questionnaire response(s).

2

GENERAL INFORMATION--Continued
Release of information.--The information provided by your firm in response to the questionnaire(s),
as well as any other business proprietary information submitted by your firm to the Commission in
connection with this proceeding, may become subject to, and released under, the administrative
protective order provisions of the Tariff Act of 1930 (19 U.S.C. ' 1677f) and section 207.7 of the
Commission=s Rules of Practice and Procedure (19 CFR ' 207.7). This means that certain lawyers
and other authorized individuals may temporarily be given access to the information for use in
connection with this proceeding or other import-injury proceedings conducted by the Commission
on the same or similar merchandise; those individuals would be subject to severe penalties if the
information were divulged to unauthorized individuals. In addition, if your firm is a U.S. producer,
the information you provide on your production and imports of drawn stainless steel sinks and your
responses to the questions in Part I of the producer questionnaire will be provided to the U.S.
Department of Commerce, upon its request, for use in connection with (and only in connection with)
its requirement pursuant to sections 702(c)(4) and 732(c)(4) of the Act (19 U.S.C. '' 1671a(c)(4)
and 1673a(c)(4)) to make a determination concerning the extent of industry support for the petition
requesting this proceeding. Any information provided to Commerce will be transmitted under the
confidentiality and release guidelines set forth above. Your response to these questions constitutes
your consent that such information be provided to Commerce under the conditions described above.
INSTRUCTIONS
Answer all questions.--Do not leave any question or section blank unless a questionnaire expressly
directs you to skip over certain questions or sections. If information is not readily available from
your records in exactly the form requested, furnish carefully prepared estimates. Answers to
questions and any necessary comments or explanations should be supplied in the space provided or
on separate sheets attached to the appropriate page of the questionnaire(s). If your firm is completing
more than one questionnaire in connection with this proceeding (i.e., a producer or importer
questionnaire), you need not respond to duplicated questions in the questionnaires. Questionnaires
may be filed either electronically or in paper form.
Consolidate all U.S. establishments.--Report the requested data for your establishment(s) located in
the United States. Firms operating more than one establishment should combine the data for
all establishments into a single report.
Electronic completion.--Your firm is encouraged to complete the questionnaire electronically in MS
Word format. The MS Word versions of all the questionnaires in this proceeding are available
online at the ITC web page or may be obtained directly from the Commission’s Investigator, Stefania
Pozzi Porter ([email protected], or 202-205-3177).
Electronic submission.--To the degree that it is possible and not overly burdensome, the
Commission requests that responding firms submit their questionnaire responses electronically in
MS Word format. The submission of questionnaire responses in the MS Word format allows the
Commission to compile, assess, and analyze submitted data more promptly. There are three
electronic submissions options detailed below. Paper submissions are also accepted.

3

INSTRUCTIONS--Continued
OPTIONS FOR FILING
This questionnaire is available as a “fillable” form in MS Word format on the
Commission’s website
at http://www.usitc.gov/trade_remedy/731_ad_701_cvd/investigations/2012/dra
wn_stainless_steel_sinks/finalphase.htm . Please do not attempt to modify the
format or permissions of the questionnaire document. You may complete the
questionnaire and submit it, electronically, or you may print it out and submit it in
paper form, as described below:
• Upload via Secure Drop Box.—Upload the completed questionnaire in MS Word format along
with a scanned copy of the signed certification page (page 1) through the Commission’s secure
upload facility:
Web address: https://dropbox.usitc.gov/oinv/

Pin: SINK

• Compact disc (CD).—Copy your questionnaire onto a CD, include a signed certification page
(page 1) (either in paper form or scanned PDF copied onto CD), and mail to the address below. It is
strongly recommended that you use an overnight mail service. U.S. mail sent to government offices
undergoes additional processing which not only results in substantial delays in delivery but may
also damage CDs.
• E-mail.—E-mail your questionnaire to the investigator identified on page 1 of the Instruction
Booklet; include a scanned PDF of the signed certification page (page 1). Type the following in the
e-mail subject line: BPI Questionnaire, Inv. Nos. 701-TA-489 and 731-TA-1201 F
. Please note that submitting your questionnaire by e-mail may subject your firm’s business
proprietary information to transmission over an unsecure environment and to possible disclosure.
If you choose this option, the Commission warns you that any risk involving possible disclosure of
such information is assumed by the submitter and not by the Commission.
• Fax.—Fax to 202.205.3205.
• Overnight mail service.—Mail to the following address:
United States International Trade Commission
Office of Investigations, Room 615
500 E Street SW
Washington, DC 20024
• U.S. mail.—Mail to the address above, but use zip code 20436. This option is not recommended.
U.S. mail sent to government offices undergoes additional processing to screen for hazardous
materials; this additional processing results in substantial delays in delivery.
Note: If you are a party to the proceeding, and service of the questionnaire is required, such
service should be made in paper form.
4

DEFINITIONS
Drawn stainless steel sinks.-- The products covered by the scope of these investigations are drawn
stainless steel sinks with single or multiple drawn bowls, with or without drain boards, whether
finished or unfinished, regardless of type of finish, gauge, or grade of stainless steel (“drawn
stainless steel sinks”). Mounting clips, fasteners, seals, and sound-deadening pads are also covered
by the scope of these investigations if they are included within the sales price of the drawn stainless
steel sink. Mounting clips, fasteners, seals, and sound-deadening pads are not covered by the scope
of these investigations if they are not included within the sales price of the drawn stainless steel sinks,
regardless of whether they are shipped with or entered with drawn stainless steel sinks. For purposes
of this scope definition, the term “drawn” refers to a manufacturing process using metal forming
technology to produce a smooth basin with seamless, smooth, and rounded corners. Drawn stainless
steel sinks are available in various shapes and configurations and may be described in a number of
ways including flush mount, top mount, or undermount (to indicate the attachment relative to the
countertop— see below). Stainless steel sinks with multiple drawn bowls that are joined through a
welding operation to form one unit are covered by the scope of the investigations. Drawn stainless
steel sinks are covered by the scope of the investigations whether or not they are sold in conjunction
with non-subject accessories such as faucets (whether attached or unattached), strainers, strainer sets,
rinsing baskets, bottom grids, or other accessories.
Excluded from the scope of the investigations are stainless steel sinks with fabricated bowls.
Fabricated bowls do not have seamless corners, but rather are made by notching and bending the
stainless steel, and then welding and finishing the vertical corners to form the bowls. Stainless steel
sinks with fabricated bowls may sometimes be referred to as ‘‘zero radius’’ or ‘‘near zero radius’’
sinks.
The products covered by these investigations are currently classified in the Harmonized
Tariff Schedule of the United States (“HTSUS”) under statistical reporting number 7324.10.0000
and 7324.10.00.10. Although the HTSUS subheading is provided for convenience and customs
purposes, the written description of the products under investigation is dispositive of its inclusion as
subject merchandise.
Drawn stainless steel sinks.--Attachment relative to the countertop:
Top-mount /Drop-in.-- A drawn stainless steel sink with a raised outer rim that overlaps the
hole cut into the countertop and the top surface of the countertop.
Undermount.-- A drawn stainless steel sink with a flat outer rim designed for the sink to be
mounted flush with the hole cut into the countertop and with the bottom surface of the
countertop, but without any holes cut into the back side of the rim for mounting of faucets or
other accessories.
Dual mount.-- A drawn stainless steel sink with a rim specifically designed for the sink to
be mounted either above or beneath the countertop.

5

Firm.--An individual proprietorship, partnership, joint venture, association, corporation (including
any subsidiary corporation), business trust, cooperative, trustee in bankruptcy, or receiver under
decree of any court.
Related firm.--A firm that your firm solely or jointly owned, managed, or otherwise controlled; a
firm that solely or jointly owned, managed, or otherwise controlled your firm; and/or a firm that was
solely or jointly owned, managed, or otherwise controlled by a firm that also solely or jointly owned,
managed, or otherwise controlled your firm.
Establishment.--Each facility of a firm involved in the production, importation, and/or purchase of
drawn stainless steel sinks (as defined above), including auxiliary facilities operated in conjunction
with (whether or not physically separate from) such facilities.
United States.--For purposes of this proceeding, the 50 States, Puerto Rico, the U.S. Virgin Islands,
and the District of Columbia.
Importer.--Any person or firm engaged, either directly or through a parent company or subsidiary, in
importing drawn stainless steel sinks (as defined above) into the United States from a foreign
manufacturer or through its selling agent.
Imports.--Those products identified for Customs purposes as imports for consumption for which
your firm was the importer of record (i.e., was responsible for paying any import duty) or consignee
(i.e., to which the merchandise was first delivered).
Import quantities.--Quantities reported should be net of returns.
Import values.--Values reported should be landed, duty-paid values at the U.S. port of entry,
including ocean freight and insurance costs, brokerage charges, and import duties (i.e., all charges
except inland freight in the United States).
Purchaser.--Any person or firm engaged, either directly or through a parent company or subsidiary,
in purchasing drawn stainless steel sinks (as defined above) from another firm that produces, imports,
or otherwise distributes drawn stainless steel sinks.
Purchases.--Purchases from all sources, NOT including direct imports from foreign sources located
outside of the United States (which should be reported in an importer questionnaire).
Purchase quantities.--Quantities reported should be net of returns.
Purchase values.--Values reported should be net values (i.e., gross purchase values less all
discounts, allowances, rebates, and the value of returned goods), delivered to your U.S.
receiving point.
Shipments.--Shipments of products produced in or imported by your establishment(s). Include
shipments to the contracting firm of product produced by your firm under a toll agreement.
Shipment quantities.--Quantities reported should be net of returns.
6

Shipment values.--Values reported should be net values (i.e., gross sales values less all
discounts, allowances, rebates, prepaid freight, and the value of returned goods), f.o.b. your
U.S. point of shipment. The value of domestic shipments to the contracting firm under a toll
agreement is the conversion fee (including profit).
Types of shipments:
U.S. shipments.--Commercial shipments, internal consumption, and transfers to related
firms within the United States.
Commercial shipments.--Shipments, other than internal consumption and transfers
to related firms, within the United States.
Internal consumption.--Product consumed internally by your firm.
Transfers to related firms.--Shipments made to related domestic firms.
Export shipments.--Shipments to destinations outside the United States, including
shipments to related firms.
Inventories.--Finished goods inventory, not raw materials or work-in-progress.
Average production capacity.--The level of production that your establishment(s) could reasonably
have expected to attain during the specified periods. Assume normal operating conditions (i.e.,
using equipment and machinery in place and ready to operate; normal operating levels (hours per
week/weeks per year) and time for downtime, maintenance, repair, and cleanup; and a typical or
representative product mix).
Toll agreement.--Agreement between two firms whereby the first firm furnishes the raw materials
and the second firm uses the raw materials to produce a product that it then returns to the first firm
with a charge for processing costs, overhead, etc.
Production.--All production in your establishment(s), including production consumed internally
within your firm and production for another firm under a toll agreement.
PRWs.--Production and related workers, including working supervisors and all nonsupervisory
workers (including group leaders and trainees) engaged in fabricating, processing, assembling,
inspecting, receiving, storage, handling, packing, warehousing, shipping, trucking, hauling,
maintenance, repair, janitorial and guard services, product development, auxiliary production for
plant=s own use (e.g., power plant), recordkeeping, and other services closely associated with the
above production operations.
Average number employed.--Add the number of employees, both full-time and part-time, for the 12
pay periods ending closest to the 15th of the month and divide that total by 12.

7

Hours worked.--Include time paid for sick leave, holidays, and vacation time. Include overtime
hours actually worked; do not convert overtime pay to its equivalent in straight-time hours.
Wages paid.--Total wages paid before deductions of any kind (e.g., withholding taxes, old-age and
unemployment insurance, group insurance, union dues, bonds, etc.). Include wages paid directly by
your firm for overtime, holidays, vacations, and sick leave.
Fiscal year.--The 12-month period between settlement of your firm=s financial accounts.

8