| Field |
Description |
OMB Control No: 2060-0338 |
| Engine Family Name or Test Group |
Enter the 12-character engine family name or test group name. |
Expiration Date: XX-XX-XXXX |
| Model Name |
Enter the applicable model name (optional). |
|
| Test Engine Power |
Enter the test engine power rating for the engine family name. Note that this value does not affect credit calculations. |
|
| Phase |
Select the phase that applies. If the engine family is subject to the current standards, select Phase 1. If Phase 1 credits will be accrued in the current model year, you may elect to designate certain engine families as Phase 2 Early Reduction Credits (ERCs). Phase 1 and 2 CO credits are maintained as separate balances in the Current MY worksheet but are combined in the Summary sheet since the standards are consistent. |
|
| Unique Design? (Y/N) |
If the snowmobiles in the associated engine family are considered "unique design", select "Y" from the dropdown list. Otherwise, select "N" (see Section 1051.630). |
|
| Useful Life (kW-hr) |
Enter the useful life (UL) of the engine family (or subset) in terms of kW-hr. If UL is in kilometers, you may convert to kW-hr using the following equation: UL (kW-hr) = UL (km) x maximum test power (kW) / 30 km/hr. Note that the rule specifies minimum useful life as 8,000 km. |
|
| U.S. Production |
Enter number of engines/vehicles manufactured for U.S. production. |
|
| HC FEL (g/kW-hr) |
Enter the established HC family emission limit (FEL) for the engine family (or subset) in terms of g/kW-hr. |
|
| CO FEL (g/kW-hr) |
Enter the established CO family emission limit (FEL) for the engine family (or subset) in terms of g/kW-hr. |
|
|
|
|
| EPA Form No.: 5900-132 |
|
|
|
|
|
|
|
| Credits |
HC (g/kW-hr) |
CO (g/kW-hr) |
| Phase 1 |
Phase 2 (ERCs) |
Phase 1 and Phase 2 (ERCs) |
| Current Credit Balances |
|
|
|
|
|
Current MY Credits 1 |
0.0 |
0.0 |
0.0 |
|
Credits acquired via trading |
|
|
|
|
Credits banked from prior model years |
|
|
|
| Application of Traded or Banked Credits to Current MY Balance |
|
|
|
|
|
Apply credits acquired via trading |
|
|
|
|
Apply banked credits |
|
|
|
| Credit Balances after Application of Traded or Banked Credits |
|
|
|
|
|
Credits acquired via trading |
0.0 |
|
0.0 |
|
Banked Credits |
0.0 |
|
0.0 |
| Total Credit Balance 2 |
0.0 |
0.0 |
0.0 |
|
Total Banked Credits |
0.0 |
0.0 |
0.0 |
|
|
|
|
|
| 1 Includes credits/deficits associated with the standards in Table 1 of Section 1051.103. Note that since the same standard applies to CO Phase 1 and Phase 2, the credit totals from the 'Current MY Credit Calc' worksheet are combined in the CO column of this worksheet. |
|
|
|
|
|
| 2 This balance should be at or above zero. The 'Total Banked Credits' reflects the sum of the preceding two rows: the 'Banked Credits' (adjusted based on the number of credits applied to the current MY credits balance) and the 'Total Credit Balance.' |