Form 19.1 Survey

OMB #: 0925-0593

OMB Expiration Date: 07/31/ 2013

Physical Measures Child Anthropometry Instrument, Phase 2e

Physical Measures Child Anthropometry Instrument

Event:	6-, 12-, or 24-Month
Participant:	Child
Domain:	Physical Measures
Type of Document: Allowable Mode: Allowable Method:	Data Collection Instrument In Person CAPI
Recruitment Groups:	EH, PB, HI
Version:	1.0
Release:	MDES 3.0

This page intentionally left blank.

Physical Measures Child Anthropometry Instrument

TABLE OF CONTENTS

Physical Measures Child Anthropometry Instrument 1

APPENDIX A: ANTHROPOMETRY EDIT RANGES 27

Physical Measures Child Anthropometry Instrument

(TIME_STAMP_AN_ST) PROGRAMMER INSTRUCTION:

• INSERT DATE/TIME STAMP

AN001/(ANTHRO_INTRO). Thank you for agreeing to participate in the National Children’s Study. We will be measuring {C_FNAME/the child}’s weight and length as well as {his/her/their} head, waist, arm, and leg.

DATA COLLECTOR INSTRUCTIONS:

• EXPLAIN THE ANTHROPOMETRY PROTOCOL TO THE PARENT OR CAREGIVER.

• IF THE PARENT OR CAREGIVER REFUSED THE MEASUREMENTS, SELECT REFUSED. OTHERWISE, SELECT CONTINUE.

CONTINUE 1 (RESP_REL)

REFUSED -1

PROGRAMMER INSTRUCTIONS:

• IF C_FNAME COLLECTED DURING PREVIOUS INTEVIEW AND VALID RESPONSE PROVIDED, PRELOAD C_FNAME.

• OTHERWISE, IF C_FNAME NOT COLLECTED DURING PREVIOUS INTERVIEW OR VALID RESPONSE NOT PROVIDED, DISPLAY “the child”.

• PRELOAD CHILD_SEX FROM MOST RECENT INTERVIEW:

  • IF CHILD_SEX =1, DISPLAY “his”.

  • IF CHILD_SEX = 2, DISPLAY “her”.

AN002/(AN_REF_REASON). I am sorry that you have chosen not to participate in this activity. Can you please tell me why?

DATA COLLECTOR INSTRUCTION:

• SELECT ALL THAT APPLY.

CONCERN ABOUT DISCOMFORT 1

CHILD TIRED/UNHAPPY 2

LANGUAGE ISSUE, SPANISH 3

LANGUAGE ISSUE, NON SPANISH 4

PARTICIPANT ILL/ EMERGENCY 5

NO TIME 6

EQUIPMENT FAILURE 7

SAFETY EXCLUSION 8

PHYSICAL LIMITATION 9

TECHNICIAN ERROR 10

OTHER -5

NONE GIVEN -7

PROGRAMMER INSTRUCTIONS:

• IF RESPONSE CODE -7 SELECTED, DO NOT ALLOW SELECTION OF ADDITIONAL RESPONSE CODES AND GO TO AN_END_REF.

• IF ANY COMBINATION OF RESPONSE CODES 1 THROUGH 10 SELECTED OR JUST ONE OF 1 THROUGH 10, GO TO AN_END_REF.

• IF RESPONSE CODE -5 SELECTED OR IF ANY COMBINATION OF RESPONSE CODES 1 THROUGH 10 AND -5 SELECTED, GO TO AN_REF_REASON_OTH.

AN003/(AN_REF_REASON_OTH).

SPECIFY:_______________________________

REFUSED -1 (AN_END_REF)

DON’T KNOW -2 (AN_END_REF)

PROGRAMMER INSTRUCTION:

• LIMIT FREE TEXT TO 255 CHARACTERS.

AN004/(AN_END_REF). That’s fine. Thank you for your time.

PROGRAMMER INSTRUCTION:

• GO TO TIME_STAMP_AN_ET.

AN005/(RESP_REL). WHAT IS THE RELATIONSHIP OF THE PARENT OR CAREGIVER TO CHILD?

MOTHER 1 (AN_WT_MEAS1)

FATHER 2 (AN_WT_MEAS1)

OTHER -5

AN010/(RESP_REL_OTH).

SPECIFY__________________________________

PROGRAMMER INSTRUCTION:

• LIMIT TEXT TO 255 CHARACTERS.

AN015/(AN_WT_MEAS1). WEIGHT MEASUREMENT 1.

MEASURED WEIGHT __ __ __ . __ kg

EXCEEDS CAPACITY -6 (AN_RECUMB_LENGTH1)

REFUSED -1 (AN_WT_REFUS_REASON)

COULD NOT OBTAIN -2 (AN_RECUMB_LENGTH1)

PROGRAMMER INSTRUCTIONS:

• GO TO APPENDIX A (ANTHROPOMETRY EDIT RANGES) TO DETERMINE HARD AND SOFT EDITS:

  • IF MEASUREMENT FALLS OUTSIDE MINIMUM OR MAXIMUM EXPECTED WEIGHT BASED ON AGE AND GENDER, DISPLAY SOFT EDIT.

  • IF MEASUREMENT IS < 1 OR > 199 KG, DISPLAY HARD EDIT.

AN020/(AN_WT_MEAS2). WEIGHT MEASUREMENT 2.

MEASURED WEIGHT __ __ __ . __ kg

REFUSED -1 (AN_WT_REFUS_REASON)

COULD NOT OBTAIN -2

PROGRAMMER INSTRUCTIONS:

• GO TO APPENDIX A (ANTHROPOMETRY EDIT RANGES) TO DETERMINE HARD AND SOFT EDITS:

  • IF MEASUREMENT FALLS OUTSIDE MINIMUM OR MAXIMUM EXPECTED WEIGHT BASED ON AGE AND GENDER, DISPLAY SOFT EDIT.

  • IF MEASUREMENT IS < 1 OR > 199 KG, DISPLAY HARD EDIT.

• IF VALID MEASURES PROVIDED FOR AN_WT_MEAS1 AND AN_WT_MEAS2, CALCULATE THE DIFFERENCE BETWEEN AN_WT_MEAS1 AND AN_WT_MEAS2:

  • IF AN_WT_MEAS1 AND AN_WT_MEAS2 DIFFER BY ≤ 0.3 KG, CALCULATE THE MEAN OF AN_WT_MEAS1 AND AN_WT_MEAS2, SAVE AS AN_WT_MEAS_MEAN. THEN GO TO AN_RECUMB_LENGTH1.

  • IF AN_WT_MEAS1 AND AN_WT_MEAS2 DIFFER BY > 0.3 KG, GO TO AN_WT_MEAS3.

  • GO TO AN_RECUMB_LENGTH1.

• IF AN_WT_MEAS2 = -1:

  • SAVE AN_WT_MEAS2 AS AN_WT_MEAS_MEAN.

  • GO TO AN_WT_REFUS_REASON.

• IF AN_WT_MEAS2 = -2:

  • SAVE AN_WT_MEAS2 AS AN_WT_MEAS_MEAN A

  • GO TO AN_RECUMB_LENGTH1.

AN025/(AN_WT_MEAS3). THIRD WEIGHT MEASUREMENT

MEASURED WEIGHT __ __ __ . __ kg

REFUSED -1 (AN_WT_REFUS_REASON)

COULD NOT OBTAIN -2

PROGRAMMER INSTRUCTIONS:

• GO TO APPENDIX A (ANTHROPOMETRY EDIT RANGES) TO DETERMINE HARD AND SOFT EDITS:

  • IF MEASUREMENT FALLS OUTSIDE MINIMUM OR MAXIMUM EXPECTED WEIGHT BASED ON AGE AND GENDER, DISPLAY SOFT EDIT.

  • IF MEASUREMENT IS < 1 OR > 199 KG, DISPLAY HARD EDIT.

• IF VALID MEASURES PROVIDED FOR AN_WT_MEAS1, AN_WT_MEAS2, AND AN_WT_STAND_MEAS3:

  • IF THE TWO OUTSIDE MEASUREMENTS ARE EQUIDISTANT FROM THE MIDDLE MEASURE, THEN SAVE THE MIDDLE MEASURE AS AN_WT_MEAS_MEAN.

  • IF THE TWO OUTSIDE MEASUREMENTS ARE NOT EQUIDISTANT FROM THE MIDDLE MEASURE, CALCULATE THE MEAN OF THE TWO CLOSEST MEASUREMENTS OF AN_WT_MEAS1, AN_WT_MEAS2, AND AN_WT_MEAS3 AND SAVE AS AN_WT_MEAS_MEAN.

  • GO TO AN_RECUMB_LENGTH1.

• IF AN_WT_MEAS3 = -1:

  • CALCULATE THE MEAN OF AN_WT_MEAS1 AND AN_WT_MEAS2, AND SAVE AS AN_WT_MEAS_MEAN.

  • GO TO AN_WT_REFUS_REASON.

• IF AN_WT_MEAS3 = -2:

  • CALCULATE THE MEAN OF AN_WT_MEAS1 AND AN_WT_MEAS2, AND SAVE AS AN_WT_MEAS_MEAN.

  • GO TO AN_RECUMB_LENGTH1.

AN026/(AN_WT_REFUS_REASON).

DATA COLLECTOR INSTRUCTIONS:

• ENTER REASON YOU COULD NOT OBTAIN THE WEIGHT MEASURE.

• SELECT ALL THAT APPLY.

CONCERN ABOUT DISCOMFORT 1

CHILD TIRED/UNHAPPY 2

LANGUAGE ISSUE, SPANISH 3

LANGUAGE ISSUE, NON SPANISH 4

PARTICIPANT ILL/ EMERGENCY 5

NO TIME 6

EQUIPMENT FAILURE 7

SAFETY EXCLUSION 8

PHYSICAL LIMITATION 9

TECHNICIAN ERROR 10

OTHER -5

NONE GIVEN -7

PROGRAMMER INSTRUCTIONS:

• IF RESPONSE CODE -7 SELECTED, DO NOT ALLOW SELECTION OF ADDITIONAL RESPONSE CODES AND GO TO AN_RECUMB_LENGTH1.

• IF ANY COMBINATION OF RESPONSE CODES 1 THROUGH 10 SELECTED OR JUST ONE RESPONSE OF 1 THROUGH 10 SELECTED, GO TO AN_RECUMB_LENGTH1.

• IF RESPONSE CODE -5 SELECTED OR IF ANY COMBINATION OF RESPONSE CODES 1 THROUGH 10 AND -5 SELECTED, GO TO AN_WT_REFUS_REASON_OTH.

AN018/(AN_WT_REFUS_REASON_OTH)

SPECIFY ________________________________________

PROGRAMMER INSTRUCTIONS:

• LIMIT FREE TEXT TO 255 CHARACTERS.

AN030/(AN_RECUMB_LENGTH1). FIRST RECUMBENT LENGTH.

MEASURED RECUMBENT LENGTH __ __ __ . __ cm

EXCEEDS CAPACITY -6

REFUSED -1 (AN_LENGTH_REFUS_REASON)

COULD NOT OBTAIN -2 (AN_MEASUREMENT_WT_LENGTH_COM)

AN035/(AN_RECUMB_LENGTH2). SECOND RECUMBENT LENGTH.

MEASURED RECUMBENT LENGTH __ __ __ . __ cm

REFUSED -1 (AN_LENGTH_REFUS_REASON)

COULD NOT OBTAIN -2

PROGRAMMER INSTRUCTIONS:

• IF VALID MEASURES PROVIDED FOR AN_RECUMB_LENGTH1 AND AN_RECUMB_LENGTH2, CALCULATE THE DIFFERENCE BETWEEN AN_RECUMB_LENGTH1 AND AN_RECUMB_LENGTH2:

  • IF AN_RECUMB_LENGTH1 AND AN_RECUMB_LENGTH2 DIFFER BY ≤ 1.0 CM, CALCULATE THE MEAN OF AN_RECUMB_LENGTH1 AND AN_RECUMB_LENGTH2, SAVE AS AN_RECUMB_LENGTH_MEAN, AND THEN GO TO AN_ABOVE_WAIST_ADJ_RECUMB.

  • IF AN_RECUMB_LENGTH1 AND AN_RECUMB_LENGTH2 DIFFER BY > 1.0 CM, GO TO AN_RECUMB_LENGTH3.

• IF AN_RECUMB_LENGTH2 = -1:

  • SAVE AN_RECUMB_LENGTH1 AS AN_RECUMB_LENGTH_MEAN.

  • GO TO AN_LENGTH_REFUS_REASON.

• IF AN_RECUMB_LENGTH2 = -2:

  • SAVE AN_RECUMB_LENGTH1 AS AN_RECUMB_LENGTH_MEAN.

  • GO TO AN_ABOVE_WAIST_ADJ_RECUMB.

AN040/(AN_RECUMB_LENGTH3). THIRD RECUMBENT LENGTH.

MEASURED RECUMBENT LENGTH __ __ __ . __ cm

REFUSED -1 (AN_LENGTH_REFUS_REASON)

COULD NOT OBTAIN -2

PROGRAMMER INSTRUCTIONS:

• IF VALID MEASURES PROVIDED FOR AN_RECUMB_LENGTH1, AN_RECUMB_LENGTH2, AND AN_RECUMB_LENGTH_3:

• IF THE TWO OUTSIDE MEASUREMENTS ARE EQUIDISTANT FROM THE MIDDLE MEASURE, THEN SAVE THE MIDDLE MEASURE AS AN_RECUMB_LENGTH_MEAN.

• IF THE TWO OUTSIDE MEASUREMENTS ARE NOT EQUIDISTANT FROM THE MIDDLE MEASURE, CALCULATE THE MEAN OF THE TWO CLOSEST MEASUREMENTS OF AN_RECUMB_LENGTH1, AN_RECUMB_LENGTH2, AND AN_RECUMB_LENGTH3 AND SAVE AS AN_RECUMB_LENGTH_MEAN.

• IF AN_RECUMB_LENGTH3 = -1:

  • CALCULATE THE MEAN OF AN_RECUMB_LENGTH1 AND AN_RECUMB_LENGTH2, AND SAVE AS AN_RECUMB_LENGTH_MEAN.

  • GO TO AN_LENGTH_REFUS_REASON.

• OTHERWISE, IF AN_RECUMB_LENGTH3 = -2:

  • CALCULATE THE MEAN OF AN_RECUMB_LENGTH1 AND AN_RECUMB_LENGTH2, AND SAVE AS AN_RECUMB_LENGTH_MEAN.

  • GO TO AN_ABOVE_WAIST_ADJ_RECUMB.

• FOR AN_ABOVE_WAIST_ADJUST_RECUMB AND AN_BELOW_WAIST_ADJUST_RECUMB BELOW, DISPLAY HARD EDIT IF WAIST ADJUSTEMENT IS < 0 OR >15.2 CM.

AN045/(AN_ABOVE_WAIST_ADJ_RECUMB). ABOVE WAIST ADJUSTMENT (RECUMBENT).

DATA COLLECTOR INSTRUCTION:

• ENTER “0” IF NO ADJUSTMENT IS NEEDED.

ABOVE WAIST ADJUSTMENT __ __ __ . __ cm

AN050/(AN_BELOW_WAIST_ADJ_RECUMB). BELOW WAIST ADJUSTMENT (RECUMBENT).

DATA COLLECTOR INSTRUCTION:

• ENTER “0” IF NO ADJUSTMENT IS NEEDED.

BELOW WAIST ADJUSTMENT __ __ __ . __ cm

AN055/(AN_ADJ_RECUMB_LENGTH). ADJUSTED RECUMBENT LENGTH.

ADJUSTED RECUMBENT LENGTH __ __ __ . __ cm

PROGRAMMER INSTRUCTION:

• SUBTRACT AN_ABOVE_WAIST_ADJ_RECUMB AND AN_BELOW_WAIST_ADJ_RECUMB FROM AN_RECUMB_LENGTH_MEAN AND SAVE AS AN_ADJ_RECUMB_LENGTH.

• IF VALID MEASURES PROVIDED FOR AN_RECUMB_LENGTH1 AND AN_RECUMB_LENGTH2, GO TO AN_MEASUREMENT_ WT_LENGTH_COM.

AN056/(AN_LENGTH_REFUS_REASON).

DATA COLLECTOR INSTRUCTION:

• ENTER REASON FOR REFUSING THE LENGTH MEASURE(S).

• SELECT ALL THAT APPLY.

CONCERN ABOUT DISCOMFORT 1

CHILD TIRED/UNHAPPY 2

LANGUAGE ISSUE, SPANISH 3

LANGUAGE ISSUE, NON SPANISH 4

PARTICIPANT ILL/ EMERGENCY 5

NO TIME 6

EQUIPMENT FAILURE 7

SAFETY EXCLUSION 8

PHYSICAL LIMITATION 9

TECHNICIAN ERROR 10

OTHER -5

NONE GIVEN -7

PROGRAMMER INSTRUCTIONS:

• IF RESPONSE CODE -7 SELECTED, DO NOT ALLOW SELECTION OF ADDITIONAL RESPONSE CODES AND GO TO AN_MEASUREMENT_RECUM_LENGTH_COM.

• IF ANY COMBINATION OF RESPONSE CODES 1 THROUGH 10 SELECTED OR JUST ONE RESPONSE OF 1 THROUGH 10 SELECTED, GO TO AN_MEASUREMENT_RECUM_LENGTH_COM.

• IF RESPONSE CODE -5 SELECTED OR IF ANY COMBINATION OF RESPONSE CODES 1 THROUGH 10 AND -5 SELECTED, GO TO AN_LENGTH_REFUS_REASON_OTH.

AN057/(AN_LENGTH_REFUS_REASON_OTH).

SPECIFY:_____________________________

REFUSED -1

DON’T KNOW -2

AN060/(AN_MEASUREMENT_ RECUM_LENGTH_COM).

DATA COLLECTION INSTRUCTION:

• SELECT ALL THAT APPLY.

• ENTER COMMENTS ABOUT WEIGHT AND LENGTH/HEIGHT MEASUREMENTS AND ABOVE/BELOW WAIST ADJUSTMENTS.

NONE………………………. 1 (AN_FEMUR_LENGTH)

POSITION NOT STRAIGHT FOR LENGTH…………….. 2 (AN_FEMUR_LENGTH)

MEDICAL APPLIANCE/CAST NOT REMOVED…… 3 (AN_FEMUR_LENGTH)

AMPUTATION – LEG………………………………… 4 (AN_FEMUR_LENGTH)

AMPUTATION – ARM……… 5 (AN_FEMUR_LENGTH)

OTHER -5

PROGRAMMER INSTRUCTIONS:

• IF RESPONSE CODE OF 1 SELECTED, DO NOT ALLOW SELECTION OF ADDITIONAL RESPONSE CODES.

• IF ANY COMBINATION OF RESPONSE CODES 2 THROUGH 5 SELECTED OR JUST ONE OF THE RESPONSES 2 THROUGH 5 SELECTED, GO TO AN_FEMUR_LENGTH.

• IF RESPONSE CODE -5 SELECTED OR ANY COMBINATION OF 2 THROUGH 5 AND -5 SELECTED, GO TO AN_MEASUREMENT_RECUMB_LENGTH_COM_OTH.

• IF AN_WT_MEAS1, AN_WT_MEAS2, OR AN_WT_MEAS3 = -2, DISPLAY “PLEASE ENTER THE REASON YOU COULD NOT OBTAIN THE WEIGHT MEASURE.”

• IF AN_RECUMB_LENGTH1, AN_RECUMB_LENGTH2, OR AN_RECUMB_LENGTH3 = -2, DISPLAY “PLEASE ENTER THE REASON YOU COULD NOT OBTAIN THE LENGTH MEASURE.”

AN061/(AN_MEASUREMENT_RECUMB_LENGTH_COM_OTH).

SPECIFY __________________________

PROGRAMMER INSTRUCTIONS:

• LIMIT FREE TEXT TO 255 CHARACTERS.

AN065/(AN_ FEMUR_LENGTH). FEMUR LENGTH

MEASURED FEMUR LENGTH ………………… __ __ __ . __ cm.

REFUSED ………………………………………………… -1 (AN_WAIST_CIR1)

COULD NOT OBTAIN ………………………………….. -2 (AN_WAIST_CIR1)

AN070/(AN_MID_FEMUR_LENGTH).

PROGRAMMER INSTRUCTIONS:

• CREATE DERIVED VARIABLE AN_MID_FEMUR_LENGTH WHERE AN_MID_FEMUR_LENGTH = AN_FEMUR_LENGTH/2 AND STORE AND DISPLAY ON SCREEN AS AN_FEMUR_LENGTH/2.

AN075/(AN_THIGH_CIR1). THIGH CIRCUMFERENCE 1

MEASURED THIGH CIRCUMFERENCE ………………… __ __ __ . __ cm.

REFUSED ………………………………………………… -1 (AN_WAIST_CIR1)

COULD NOT OBTAIN ………………………………….. -2 (AN_WAIST_CIR1)

DATA COLLECTOR INSTRUCTION:

• TAKE THIGH CIRCUMFERENCE AT THE MIDPOINT OF FEMUR LENGTH.

PROGRAMMER INSTRUCTIONS:

• GO TO APPENDIX A TO DETERMINE HARD AND SOFT EDITS:

  • IF PARTICIPANT IS 24 MONTHS OR OLDER BASED ON CALCULATION OF CHILD AGE USING CHILD_DOB AND VISIT_DATE, DISPLAY SOFT EDIT IF MEASUREMENT FALLS OUTSIDE MINIMUM OR MAXIMUM EXPECTED THIGH CIRCUMFERENCE BASED ON AGE AND GENDER.

  • IF MEASUREMENT IS <0 OR > 200 CM, DISPLAY HARD EDIT.

AN080/(AN_THIGH_CIR2). THIGH CIRCUMFERENCE 2

MEASURED THIGH CIRCUMFERENCE ………………… __ __ __ . __ cm.

REFUSED ………………………………………………… -1

COULD NOT OBTAIN ………………………………….. -2

DATA COLLECTOR INSTRUCTION:

• TAKE THIGH CIRCUMFERENCE AT THE MIDPOINT OF FEMUR LENGTH.

PROGRAMMER INSTRUCTIONS:

• GO TO APPENDIX A (ANTHROPOMETRY EDIT RANGES) TO DETERMINE HARD AND SOFT EDITS:

  • IF PARTICIPANT IS 24 MONTHS OR OLDER BASED ON CALCULATION OF CHILD AGE USING CHILD_DOB AND VISIT_DATE, DISPLAY SOFT EDIT IF MEASUREMENT FALLS OUTSIDE MINIMUM OR MAXIMUM EXPECTED THIGH CIRCUMFERENCE BASED ON AGE AND GENDER.

  • IF MEASUREMENT IS <0 OR > 200 CM, DISPLAY HARD EDIT.

• IF VALID MEASURES PROVIDED FOR AN_THIGH_CIR1 AND AN_THIGH_CIR2, CALCULATE THE DIFFERENCE BETWEEN AN_THIGH_CIR1 AND AN_THIGH_CIR2:

  • IF AN_THIGH_CIR1 AND AN_THIGH_CIR2 DIFFER BY ≤ 0.5 CM, CALCULATE THE MEAN OF AN_THIGH_CIR1 AND AN_THIGH_CIR2, SAVE AS AN_THIGH_CIR_MEAN, AND THEN GO TO AN_MEASUREMENT_THIGH_CIR_COM.

  • IF AN_THIGH_CIR1 AND AN_THIGH_CIR2 DIFFER BY > 0.5 CM, GO TO AN_THIGH_CIR3.

  • GO TO AN_MEASUREMENT_THIGH_CIR_COM.

• IF AN_THIGH_CIR2 = -1:

  • SAVE AN_THIGH_CIR1 AS AN_THIGH_CIR_MEAN.

  • GO TO AN_THIGH_CIRC_REFUS_REASON.

• OTHERWISE, IF AN_THIGH_CIR2 = -2:

  • SAVE AN_THIGH_CIR1 AS AN_THIGH_CIR_MEAN.

  • GO TO AN_MEASUREMENT_THIGH_CIR_COM.

AN085/(AN_MID_THIGH_CIR3). THIGH CIRCUMFERENCE 3

MEASURED THIGH CIRCUMFERENCE ………………… __ __ __ . __ cm.

REFUSED ………………………………………………… -1

COULD NOT OBTAIN ………………………………….. -2

DATA COLLECTOR INSTRUCTION:

• TAKE THIGH CIRCUMFERENCE AT THE MIDPOINT OF FEMUR LENGTH.

PROGRAMMER INSTRUCTIONS:

• GO TO APPENDIX A (ANTHROPOMETRY EDIT RANGES) TO DETERMINE HARD AND SOFT EDITS:

  • IF PARTICIPANT IS 24 MONTHS OR OLDER BASED ON CALCULATION OF CHILD AGE USING CHILD_DOB AND VISIT_DATE, DISPLAY SOFT EDIT IF MEASUREMENT FALLS OUTSIDE MINIMUM OR MAXIMUM EXPECTED THIGH CIRCUMFERENCE BASED ON AGE AND GENDER.

  • IF MEASUREMENT IS <0 OR > 200 CM, DISPLAY HARD EDIT.

• IF VALID MEASURES PROVIDED FOR AN_THIGH_CIR1, AN_THIGH_CIR2, AND AN_THIGH_CIR3:

  • IF THE TWO OUTSIDE MEASUREMENTS ARE EQUIDISTANT FROM THE MIDDLE MEASURE, THEN SAVE THE MIDDLE MEASURE AS AN_THIGH_CIR_MEAN.

  • IF THE TWO OUTSIDE MEASUREMENTS ARE NOT EQUIDISTANT FROM THE MIDDLE MEASURE, CALCULATE THE MEAN OF THE TWO CLOSEST MEASUREMENTS OF AN_THIGH_CIR1, AN_THIGH_CIR2, AND AN_THIGH_CIR3 AND SAVE THE VALUE AS AN_THIGH_CIR_MEAN.

  • GO TO AN_MEASUREMENT_THIGH_CIR_COM.

• IF AN_THIGH_CIR3 = -1:

  • CALCULATE THE MEAN OF AN_THIGH_CIR2 AND AN_THIGH_CIR2, AND SAVE AS AN_THIGH_CIR_MEAN.

  • GO TO AN_THIGH_CIRC_REFUS_REASON.

• OTHERWISE, IF AN_THIGH_CIR3 = -2:

  • CALCULATE THE MEAN OF AN_THIGH_CIR2 AND AN_THIGH_CIR2, AND SAVE AS AN_THIGH_CIR_MEAN.

  • GO TO AN_MEASUREMENT_THIGH_CIR_COM.

AN086/(AN_THIGH_CIRC_REFUS_REASON).

DATA COLLECTOR INSTRUCTION:

• SELECT ALL THAT APPLY.

• ENTER REASON FOR REFUSING THE CIRCUMFERENCE MEASURE.

CONCERN ABOUT DISCOMFORT 1

CHILD TIRED/UNHAPPY 2

LANGUAGE ISSUE, SPANISH 3

LANGUAGE ISSUE, NON SPANISH 4

PARTICIPANT ILL/ EMERGENCY 5

NO TIME 6

EQUIPMENT FAILURE 7

SAFETY EXCLUSION 8

PHYSICAL LIMITATION 9

TECHNICIAN ERROR 10

OTHER -5

NONE GIVEN -7

PROGRAMMER INSTRUCTIONS:

• IF RESPONSE CODE -7 SELECTED, DO NOT ALLOW SELECTION OF ADDITIONAL RESPONSE CODES AND GO TO AN_MEASUREMENT_THIGH_CIR_COM.

• IF ANY COMBINATION OF RESPONSE CODES 1 THROUGH 10 SELECTED OR JUST ONE RESPONSE OF 1 THROUGH 10 SELECTED, GO TO AN_MEASUREMENT_THIGH_CIR_COM.

• IF RESPONSE CODE -5 SELECTED OR IF ANY COMBINATION OF RESPONSE CODES 1 THROUGH 10 AND -5 SELECTED, GO TO AN_THIGH_CIRC_REFUS_REASON_OTH.

AN087/(AN_THIGH_CIRC_REFUS_REASON_OTH).

SPECIFY:_____________________________

REFUSED -1

DON’T KNOW -2

AN090/(AN_MEASUREMENT_THIGH_CIR_COM).

DATA COLLECTION INSTRUCTION:

• SELECT ALL THAT APPLY.

• ENTER COMMENTS ABOUT FEMUR LENGTH AND THIGH CIRCUMFERENCE MEASUREMENTS.

NONE………………………………………… 1

MEASUREMENT TAKEN OVER THICK CLOTHING 2

MEASUREMENT TAKEN ON LEFT THIGH 3

MEDICAL APPLIANCE/CAST NOT REMOVED…… 4

AMPUTATION – LEG………………………………… 5

OTHER -5

PROGRAMMER INSTRUCTIONS:

• IF RESPONSE CODE 1 SELECTED, DO NOT ALLOW SELECTION OF ADDITIONAL RESPONSE CODES AND GO TO AN_WAIST_CIR1.

• IF ANY COMBINATION OF RESPONSE CODES 2 THROUGH 3 SELECTED, GO TO AN_WAIST_CIR1.

• IF RESPONSE CODE -5 SELECTED OR IF ANY COMBINATION OF RESPONSE CODES 2 THROUGH 3 AND -5 SELECTED, GO TO AN_MEASUREMENT_THIGH_CIR_OTH.

• IF AN_MID_THIGH_CIR1, AN_MID_THIGH_CIR2, OR AN_MID_THIGH_CIR3 = -2, DISPLAY “PLEASE ENTER THE REASON YOU COULD NOT OBTAIN THE MID THIGH CIRCUMFERENCE MEASURE.”

AN095/(AN_MEASUREMENT_THIGH_CIR_COM_OTH). DATA COLLECTOR MEASUREMENT COMMENTS

SPECIFY __________________________

PROGRAMMER INSTRUCTION:

• LIMIT FREE TEXT TO 255 CHARACTERS.

AN100/(AN_WAIST_CIR1). WAIST CIRCUMFERENCE 1

MEASURED WAIST CIRCUMFERENCE ………………………… __ __ __ . __ cm.

REFUSED -1 (AN_WAIST_CIRC_REFUS_REASON)

COULD NOT OBTAIN -2 (AN_MEASUREMENT_WAIST_CIR_COM)

PROGRAMMER INSTRUCTIONS:

• GO TO APPENDIX A (ANTHROPOMETRY EDIT RANGES) TO DETERMINE HARD AND SOFT EDITS:

  • IF MEASUREMENT FALLS OUTSIDE MINIMUM OR MAXIMUM EXPECTED WAIST CIRCUMFERENCE BASED ON AGE AND GENDER, DISPLAY SOFT EDIT.

  • IF MEASUREMENT IS <0 OR > 200 CM, DISPLAY HARD EDIT.

AN105/(AN_WAIST_CIR2). WAIST CIRCUMFERENCE 2

MEASURED WAIST CIRCUMFERENCE ………………………… __ __ __ . __ cm.

REFUSED -1 (AN_WAIST_CIRC_REFUS_REASON)

COULD NOT OBTAIN -2 (AN_MEASUREMENT_WAIST_CIR_COM)

PROGRAMMER INSTRUCTIONS:

• GO TO APPENDIX A (ANTHROPOMETRY EDIT RANGES) TO DETERMINE HARD AND SOFT EDITS:

  • IF MEASUREMENT FALLS OUTSIDE MINIMUM OR MAXIMUM EXPECTED WAIST CIRCUMFERENCE BASED ON AGE AND GENDER, DISPLAY SOFT EDIT.

  • IF MEASUREMENT IS <0 OR > 200 CM, DISPLAY HARD EDIT.

• IF VALID MEASURES PROVIDED FOR AN_WAIST_CIR1 AND AN_WAIST_CIR2, CALCULATE THE DIFFERENCE BETWEEN AN_WAIST_CIR1 AND AN_WAIST_CIR2:

  • IF AN_WAIST_CIR1 AND AN_WAIST_CIR2 DIFFER BY ≤ 1.0 CM, CALCULATE THE MEAN OF AN_WAIST_CIR1 AND AN_WAIST_CIR2, SAVE AS AN_WAIST_CIR_MEAN, AND THEN GO TO AN_MEASUREMENT_WAIST_CIR_COM.

  • IF AN_WAIST_CIR1 AND AN_WAIST_CIR2 DIFFER BY > 1.0 CM, GO TO AN_WAIST_CIR3.

• IF AN_WAIST_CIR2 = -1:

  • SAVE AN_WAIST_CIR1 AS AN_WAIST_CIR_MEAN

  • GO TO AN_WAIST_CIRC_REFUS_REASON.

• IF AN_WAIST_CIR2 = -2:

  • SAVE AN_WAIST_CIR1 AS AN_WAIST_CIR_MEAN

  • GO TO AN_MEASUREMENT_WAIST_CIR_COM

AN110/(AN_WAIST_CIR3). WAIST CIRCUMFERENCE 3

MEASURED WAIST CIRCUMFERENCE ………………………… __ __ __ . __ cm.

REFUSED -1

COULD NOT OBTAIN -2 (AN_MEASUREMENT_WAIST_CIR_COM)

PROGRAMMER INSTRUCTIONS:

• GO TO APPENDIX A (ANTHROPOMETRY EDIT RANGES) TO DETERMINE HARD AND SOFT EDITS:

  • IF MEASUREMENT FALLS OUTSIDE MINIMUM OR MAXIMUM EXPECTED WAIST CIRCUMFERENCE BASED ON AGE AND GENDER, DISPLAY SOFT EDIT.

  • IF MEASUREMENT IS <0 OR > 200 CM, DISPLAY HARD EDIT.

• IF VALID MEASURES PROVIDED FOR AN_WAIST_CIR1, AN_WAIST_CIR2, AND AN_WAIST_CIR3:

  • IF THE TWO OUTSIDE MEASUREMENTS ARE EQUIDISTANT FROM THE MIDDLE MEASURE, THEN SAVE THE MIDDLE MEASURE AS AN_WAIST_CIR_MEAN.

  • IF THE TWO OUTSIDE MEASUREMENTS ARE NOT EQUIDISTANT FROM THE MIDDLE MEASURE, CALCULATE THE MEAN OF THE TWO CLOSEST MEASUREMENTS OF AN_WAIST_CIR1, AN_WAIST_CIR2, AND AN_WAIST_CIR3 AND SAVE THE VALUE AS AN_WAIST_CIR_MEAN.

  • GO TO AN_MEASUREMENT_WAIST_CIR_COM.

• IF AN_WAIST_CIR3 = -1:

  • CALCULATE THE MEAN OF AN_WAIST_CIR1 AND AN_WAIST_CIR2, AND SAVE AS AN_WAIST_CIR_MEAN.

  • GO TO AN_WAIST_CIRC_REFUS_REASON.

• IF AN_WAIST_CIR3 = -2:

  • CALCULATE THE MEAN OF AN_WAIST_CIR1 AND AN_WAIST_CIR2, AND SAVE AS AN_WAIST_CIR_MEAN.

  • GO TO AN_MEASUREMENT_WAIST_CIR_COM

AN111/(AN_WAIST_CIRC_REFUS_REASON).

DATA COLLECTOR INSTRUCTION:

• SELECT ALL THAT APPLY.

• ENTER REASON FOR REFUSING THE CIRCUMFERENCE MEASURE.

CONCERN ABOUT DISCOMFORT 1

CHILD TIRED/UNHAPPY 2

LANGUAGE ISSUE, SPANISH 3

LANGUAGE ISSUE, NON SPANISH 4

PARTICIPANT ILL/ EMERGENCY 5

NO TIME 6

EQUIPMENT FAILURE 7

SAFETY EXCLUSION 8

PHYSICAL LIMITATION 9

TECHNICIAN ERROR 10

OTHER -5

NONE GIVEN -7

PROGRAMMER INSTRUCTIONS:

• IF RESPONSE CODE -7 SELECTED, DO NOT ALLOW SELECTION OF ADDITIONAL RESPONSE CODES AND GO TO AN_MEASUREMENT_WAIST_CIR_COM.

• IF ANY COMBINATION OF RESPONSE CODES 1 THROUGH 10 SELECTED OR JUST ONE RESPONSE OF 1 THROUGH 10 SELECTED, GO TO AN_MEASUREMENT_WAIST_CIR_COM.

• IF RESPONSE CODE -5 SELECTED OR IF ANY COMBINATION OF RESPONSE CODES 1 THROUGH 10 AND -5 SELECTED, GO TO AN_WAIST_CIRC_REFUS_REASON_OTH.

AN112/(AN_WAIST_CIRC_REFUS_REASON_OTH).

SPECIFY:_____________________________

REFUSED -1

DON’T KNOW -2

PROGRAMMER INSTRUCTION:

• LIMIT FREE TEXT TO 255 CHARACTERS.

AN115/(AN_MEASUREMENT_WAIST_CIR_COM).

DATA COLLECTOR INSTRUCTIONS:

• SELECT ALL THAT APPLY

• ENTER COMMENTS ABOUT WAIST CIRCUMFERENCE MEASUREMENTS.

NONE………………………………………… 1

MEASUREMENT TAKEN OVER THICK CLOTHING 2

MEDICAL APPLIANCE/CAST NOT REMOVED…… 3

OTHER -5

PROGRAMMER INSTRUCTIONS:

• IF RESPONSE CODE 1 SELECTED, DO NOT ALLOW SELECTION OF ADDITIONAL RESPONSE CODES AND GO TO AN_HEAD_CIR1.

• IF RESPONSE CODE 2 SELECTED, GO TO AN_HEAD_CIR1.

• OTHERWISE, IF RESPONSE CODE -5 SELECTED OR IF RESPONSE CODES 2 AND -5 SELECTED, GO TO AN_MEASUREMENT_WAIST_CIR_OTH.

• IF AN_WAIST_CIR1, AN_WAIST_CIR2, OR AN_WAIST_CIR3 = -2, DISPLAY “PLEASE ENTER THE REASON YOU COULD NOT OBTAIN THE WAIST CIRCUMFERENCE MEASURE.”

AN120/(AN_MEASUREMENT_WAIST_CIR_COM_OTH). DATA COLLECTOR MEASUREMENT COMMENTS

SPECIFY __________________________

PROGRAMMER INSTRUCTION:

• LIMIT FREE TEXT TO 255 CHARACTERS.

AN125/(AN_HEAD_CIR1). HEAD CIRCUMFERENCE 1

MEASURED HEAD CIRCUMFERENCE ………………………… __ __ __ . __ cm.

REFUSED ………………………………………………… -1 (AN_HEAD_CIRC_REFUS_REASON)

COULD NOT OBTAIN ………………………………….. -2 (AN_HEAD_CIRC_REFUS_REASON)

PROGRAMMER INSTRUCTIONS:

• GO TO APPENDIX A (ANTHROPOMETRY EDIT RANGES) TO DETERMINE HARD AND SOFT EDITS:

  • IF MEASUREMENT FALLS OUTSIDE MINIMUM OR MAXIMUM EXPECTED HEAD CIRCUMFERENCE BASED ON AGE AND GENDER, DISPLAY SOFT EDIT.

  • IF MEASUREMENT IS < 0 OR > 70 CM, DISPLAY HARD EDIT.

AN130/(AN_HEAD_CIR2). HEAD CIRCUMFERENCE 2

MEASURED HEAD CIRCUMFERENCE ………………………… __ __ __ . __ cm.

REFUSED ………………………………………………… -1

COULD NOT OBTAIN ………………………………….. -2

PROGRAMMER INSTRUCTIONS:

• GO TO APPENDIX A (ANTHROPOMETRY EDIT RANGES) TO DETERMINE HARD AND SOFT EDITS:

  • IF MEASUREMENT FALLS OUTSIDE MINIMUM OR MAXIMUM EXPECTED HEAD CIRCUMFERENCE BASED ON AGE AND GENDER, DISPLAY SOFT EDIT.

  • IF MEASUREMENT IS < 0 OR > 70 CM, DISPLAY HARD EDIT.

• IF VALID MEASURES PROVIDED FOR AN_HEAD_CIR1 AND AN_HEAD_CIR2, CALCULATE THE DIFFERENCE BETWEEN AN_HEAD_CIR1 AND AN_HEAD_CIR2:

  • IF AN_HEAD_CIR1 AND AN_HEAD_CIR2 DIFFER BY ≤ 0.3 CM, CALCULATE THE MEAN OF AN_HEAD_CIR1 AND AN_HEAD_CIR2, SAVE AS AN_HEAD_CIR_MEAN, AND GO TO AN_ HUMERUS_LENGTH.

  • IF AN_HEAD_CIR1 AND AN_HEAD_CIR2 DIFFER BY > 0.3 CM, GO TO AN_HEAD_CIR3.

• IF AN_HEAD_CIR2 = -1:

  • SAVE AN_HEAD_CIR1 AS AN_HEAD_CIR_MEAN.

  • GO TO AN_HEAD_CIRC_REFUS_REASON.

• IF AN_HEAD_CIR2 = -2:

  • SAVE AN_HEAD_CIR1 AS AN_HEAD_CIR_MEAN.

  • GO TO AN_HUMERUS_LENGTH.

AN135/(AN_HEAD_CIR3). HEAD CIRCUMFERENCE 3

MEASURED HEAD CIRCUMFERENCE ………………………… __ __ __ . __ cm.

REFUSED ………………………………………………… -1

COULD NOT OBTAIN ………………………………….. -2

PROGRAMMER INSTRUCTIONS:

• GO TO APPENDIX A (ANTHROPOMETRY EDIT RANGES) TO DETERMINE HARD AND SOFT EDITS:

  • IF MEASUREMENT FALLS OUTSIDE MINIMUM OR MAXIMUM EXPECTED HEAD CIRCUMFERENCE BASED ON AGE AND GENDER, DISPLAY SOFT EDIT.

  • IF MEASUREMENT IS < 0 OR > 70 CM, DISPLAY HARD EDIT.

• IF VALID MEASURES PROVIDED FOR AN_HEAD_CIR1, AN_HEAD_CIR2, AND AN_HEAD_CIR3:

  • IF THE TWO OUTSIDE MEASUREMENTS ARE EQUIDISTANT FROM THE MIDDLE MEASURE, THEN SAVE THE MIDDLE MEASURE AS AN_HEAD_CIR_MEAN.

  • IF THE TWO OUTSIDE MEASUREMENTS ARE NOT EQUIDISTANT FROM THE MIDDLE MEASURE, CALCULATE THE MEAN OF THE TWO CLOSEST MEASUREMENTS OF AN_HEAD_CIR1, AN_HEAD_CIR2, AND AN_HEAD_CIR3 AND SAVE THE VALUE AS AN_HEAD_CIR_MEAN.

  • GO TO AN_HUMERUS_LENGTH.

• IF AN_HEAD_CIR3 = -1:

  • CALCULATE THE MEAN OF AN_HEAD_CIR1 AND AN_HEAD_CIR2, AND SAVE AS AN_HEAD_CIR_MEAN.

  • GO TO AN_HEAD_CIRC_REFUS_REASON.

• OTHERWISE, IF AN_HEAD_CIR3 = -2:

  • CALCULATE THE MEAN OF AN_HEAD_CIR1 AND AN_HEAD_CIR2, AND SAVE AS AN_HEAD_CIR_MEAN.

  • GO TO AN_HUMERUS_LENGTH.

• FOR AN_HUMERUS_LENGTH BELOW, GO TO APPENDIX A (ANTHROPOMETRY EDIT RANGES) TO DETERMINE HARD AND SOFT EDITS:

  • IF MEASUREMENT FALLS OUTSIDE MINIMUM OR MAXIMUM EXPECTED HUMERUS LENGTH BASED ON AGE AND GENDER, DISPLAY SOFT EDIT.

  • IF MEASUREMENT IS <0 OR > 80 CM, DISPLAY HARD EDIT.

AN136/(AN_HEAD_CIRC_REFUS_REASON).

DATA COLLECTOR INSTRUCTION:

• SELECT ALL THAT APPLY.

• ENTER REASON FOR REFUSING THE CIRCUMFERENCE MEASURE.

CONCERN ABOUT DISCOMFORT 1

CHILD TIRED/UNHAPPY 2

LANGUAGE ISSUE, SPANISH 3

LANGUAGE ISSUE, NON SPANISH 4

PARTICIPANT ILL/ EMERGENCY 5

NO TIME 6

EQUIPMENT FAILURE 7

SAFETY EXCLUSION 8

PHYSICAL LIMITATION 9

TECHNICIAN ERROR 10

OTHER -5

NONE GIVEN -7

PROGRAMMER INSTRUCTIONS:

• IF RESPONSE CODE -7 SELECTED, DO NOT ALLOW SELECTION OF ADDITIONAL RESPONSE CODES AND GO TO AN_HUMERUS_LENGTH.

• IF ANY COMBINATION OF RESPONSE CODES 1 THROUGH 10 SELECTED OR JUST ONE RESPONSE OF 1 THROUGH 10 SELECTED, GO TO AN_HUMERUS_LENGTH.

• IF RESPONSE CODE -5 SELECTED OR IF ANY COMBINATION OF RESPONSE CODES 1 THROUGH 10 AND -5 SELECTED, GO TO AN_HEAD_CIRC_REFUS_REASON_OTH.

AN137/(AN_HEAD_CIRC_REFUS_REASON_OTH).

SPECIFY:_____________________________

REFUSED -1

DON’T KNOW -2

PROGRAMMER INSTRUCTION:

• LIMIT FREE TEXT TO 255 CHARACTERS.

AN140/(AN_HUMERUS_LENGTH). HUMERUS LENGTH

MEASURED HUMERUS LENGTH ………………………… __ __ __ . __ cm.

REFUSED…………………………………………………-1 (AN_HUM_LENGTH_REFUS_REASON)

COULD NOT OBTAIN ………………………………….. -2 (AN_ULNAR_LENGTH)

AN145/(AN_MID_HUMERUS_LENGTH).

PROGRAMMER INSTRUCTION:

• CREATE DERIVED VARIABLE, AN_MID_HUMERUS_LENGTH, WHERE MID HUMERUS LENGTH = AN_HUMERUS_LENGTH/2 AND STORE AND DISPLAY ON SCREEN AS AN_MID_HUMERUS_LENGTH.

AN136/(AN_HUM_LENGTH_REFUS_REASON). ENTER REASON FOR REFUSING THE MID HUMERUS LENGTH MEASURE.

CONCERN ABOUT DISCOMFORT 1

CHILD TIRED/UNHAPPY 2

LANGUAGE ISSUE, SPANISH 3

LANGUAGE ISSUE, NON SPANISH 4

PARTICIPANT ILL/ EMERGENCY 5

NO TIME 6

EQUIPMENT FAILURE 7

SAFETY EXCLUSION 8

PHYSICAL LIMITATION 9

TECHNICIAN ERROR 10

OTHER -5

NONE GIVEN -7

PROGRAMMER INSTRUCTIONS:

• IF RESPONSE CODE -7 SELECTED, DO NOT ALLOW SELECTION OF ADDITIONAL RESPONSE CODES AND GO TO AN_MEASUREMENT_UP_ARM_CIR_COM.

• IF ANY COMBINATION OF RESPONSE CODES 1 THROUGH 10 SELECTED OR JUST ONE RESPONSE OF 1 THROUGH 10 SELECTED, GO TO AN_HUMERUS_LENGTH.

• IF RESPONSE CODE -5 SELECTED OR IF ANY COMBINATION OF RESPONSE CODES 1 THROUGH 10 AND -5 SELECTED, GO TO AN_HEAD_CIRC_REFUS_REASON_OTH.

AN137/(AN_HUM_LENGTH_REFUS_REASON_OTH).

SPECIFY:_____________________________

REFUSED -1

DON’T KNOW -2

PROGRAMMER INSTRUCTION:

• GO TO AN_MEASUREMENT_UP_ARM_CIR_COM.

AN150/(AN_UP_ARM_CIR1). UPPER ARM CIRCUMFERENCE 1.

DATA COLLECTOR INSTRUCTION:

• TAKE UPPER ARM CIRCUMFERENCE AT THE HUMERUS MIDPOINT.

MEASURED UPPER ARM CIRCUMFERENCE………………… __ __ __ . __ cm.

REFUSED ………………………………………………… -1 (AN_UP_ARM_CIRC_REFUS_REASON)

COULD NOT OBTAIN ………………………………….. -2 (AN_UP_ARM_CIRC_REFUS_REASON)

PROGRAMMER INSTRUCTIONS:

• GO TO APPENDIX A (ANTHROPOMETRY EDIT RANGES) TO DETERMINE HARD AND SOFT EDITS:

  • IF MEASUREMENT FALLS OUTSIDE MINIMUM OR MAXIMUM EXPECTED UPPER ARM CIRCUMFERENCE BASED ON AGE AND GENDER, DISPLAY SOFT EDIT.

  • IF MEASUREMENT IS <0 OR > 70 CM, DISPLAY HARD EDIT.

AN155/(AN_UP_ARM_CIR2). MID UPPER ARM CIRCUMFERENCE 2.

DATA COLLECTOR INSTRUCTION:

• TAKE UPPER ARM CIRCUMFERENCE AT THE HUMERUS MIDPOINT.

MEASURED UPPER ARM CIRCUMFERENCE …………..…… __ __ __ . __ cm.

REFUSED ………………………………………………… -1

COULD NOT OBTAIN ………………………………….. -2

PROGRAMMER INSTRUCTIONS:

• GO TO APPENDIX A TO DETERMINE HARD AND SOFT EDITS:

  • IF MEASUREMENT FALLS OUTSIDE MINIMUM OR MAXIMUM EXPECTED UPPER ARM CIRCUMFERENCE BASED ON AGE AND GENDER, DISPLAY SOFT EDIT.

  • IF MEASUREMENT IS < 0 OR > 70 CM, DISPLAY HARD EDIT.

• IF VALID MEASURES PROVIDED FOR AN_UP_ARM_CIR1 AND AN_UP_ARM_CIR2, CALCULATE THE DIFFERENCE BETWEEN AN_UP_ARM_CIR1 AND AN_UP_ARM_CIR2:

  • IF AN_UP_ARM_CIR1 AND AN_UP_ARM_CIR2 DIFFER BY ≤ 0.5 CM, CALCULATE THE MEAN OF AN_UP_ARM_CIR1 AND AN_UP_ARM_CIR2, SAVE AS AN_UP_ARM_CIR_MEAN, AND THEN GO TO AN_ULNAR_LENGTH.

  • IF AN_ UP_ARM_CIR1 AND AN_UP_ARM_CIR2 DIFFER BY > 0.5 CM, GO TO AN_ UP_ARM_CIR3.

• IF AN_UP_ARM_CIR2 = -1:

  • SAVE AN_UP_ARM_CIR1 AS AN_UP_ARM_MEAN

  • GO TO AN_UP_ARM_CIRC_REFUS_REASON

• IF AN_UP_ARM_CIR2 = -2:

  • SAVE AN_UP_ARM_CIR1 AS AN_UP_ARM_MEAN

  • GO TO AN_MEASUREMENT_UP_ARM_CIR_COM.

AN160/(AN_UP_ARM_CIR3). UPPER ARM CIRCUMFERENCE 3.

MEASURED UPPER ARM CIRCUMFERENCE …………..…… __ __ __ . __ cm.

REFUSED ………………………………………………… -1

COULD NOT OBTAIN ………………………………….. -2

COLLECTOR INSTRUCTION:

• TAKE UPPER ARM CIRCUMFERENCE AT THE HUMERUS MIDPOINT.

PROGRAMMER INSTRUCTIONS:

• GO TO APPENDIX A TO DETERMINE HARD AND SOFT EDITS:

  • IF MEASUREMENT FALLS OUTSIDE MINIMUM OR MAXIMUM EXPECTED UPPER ARM CIRCUMFERENCE BASED ON AGE AND GENDER, DISPLAY SOFT EDIT.

  • IF MEASUREMENT IS <0 OR > 70 CM, DISPLAY HARD EDIT.

• IF VALID MEASURES PROVIDED FOR AN_UP_ARM_CIR1 AND AN_UP_ARM_CIR2:

  • IF THE TWO OUTSIDE MEASUREMENTS ARE EQUIDISTANT FROM THE MIDDLE MEASURE, SAVE THE MIDDLE MEASURE AS AN_UP_ARM_CIR_MEAN.

  • IF THE TWO OUTSIDE MEASUREMENTS ARE NOT EQUIDISTANT FROM THE MIDDLE MEASURE, CALCULATE THE MEAN OF THE TWO CLOSEST MEASUREMENTS OF AN_UP_ARM_CIR1, AN_UP_ARM_CIR2, AND AN_UP_ARM_CIR3 AND SAVE THE VALUE AS AN_UP_ARM_CIR_MEAN.

• IF AN_UP_ARM_CIR3 = -1:

  • CALCULATE THE MEAN OF AN_UP_ARM_CIR1 AND AN_UP_ARM_CIR2, AND SAVE AS AN_UP_ARM_CIR_MEAN.

  • GO TO AN_UP_ARM_CIRC_REFUS_REASON.

• OTHERWISE, IF AN_UP_ARM_CIR3 = -2:

  • CALCULATE THE MEAN OF AN_UP_ARM_CIR1 AND AN_UP_ARM_CIR2, AND SAVE AS AN_UP_ARM_CIR_MEAN.

  • GO TO AN_MEASUREMENT_UP_ARM_CIR_COM.

AN161/(AN_UP_ARM_CIRC_REFUS_REASON). ENTER REASON FOR REFUSING THE UPPER ARM CIRCUMFERENCE MEASURE.

CONCERN ABOUT DISCOMFORT 1 (AN_MEASUREMENT_UP_ARM_CIR_COM)

CHILD SICK 2 (AN_MEASUREMENT_UP_ARM_CIR_COM)

CHILD TIRED/UNHAPPY 3 (AN_MEASUREMENT_UP_ARM_CIR_COM)

NONE GIVEN -7 (AN_MEASUREMENT_UP_ARM_CIR_COM)

OTHER -5

AN162/(AN_UP_ARM_CIRC_REFUS_REASON_OTH).

SPECIFY:_____________________________

REFUSED -1

DON’T KNOW -2

AN165/(AN_MEASUREMENT_UP_ARM_CIR_COM).

DATA COLLECTOR INSTRUCTION:

• SELECT ALL THAT APPLY.

• ENTER COMMENTS ABOUT UPPER ARM LENGTH AND CIRCUMFERENCE.

NONE………………………………………… 1

MEASUREMENT TAKEN OVER THICK CLOTHING 2

MEASUREMENT TAKEN ON LEFT ARM 3

OTHER -5

PROGRAMMER INSTRUCTIONS:

• IF AN_UP_ARM_CIR1, AN_UP_ARM_CIR2, OR AN_UP_ARM_CIR3 = -2, DISPLAY “PLEASE ENTER THE REASON WHY YOU COULD NOT OBTAIN THE UPPER ARM CIRCUMFERENCE MEASURE.”

• IF RESPONSE CODE 1 SELECTED, DO NOT ALLOW SELECTION OF ADDITIONAL RESPONSE CODES, AND GO TO AN_ULNAR_LENGTH.

• IF ANY COMBINATION OF RESPONSE CODES 2 - 3 SELECTED, GO TO AN_ULNAR_LENGTH.

• IF RESPONSE CODE -5 SELECTED OR IF ANY COMBINATION OF RESPONSE CODES 2 - 3 AND -5 SELECTED, GO TO AN_MEASUREMENT_UP_ARM_COM_OTH.

AN170/(AN_MEASUREMENT_UP_ARM_CIR_COM_OTH). DATA COLLECTOR MEASUREMENT COMMENTS

SPECIFY __________________________

PROGRAMMER INSTRUCTION:

• LIMIT FREE TEXT TO 255 CHARACTERS

AN175/(AN_ULNAR_LENGTH). ULNAR LENGTH

MEASURED ULNAR LENGTH ………………………… __ __ __ . __ cm.

REFUSED ………………………………………………… -1 (AN_ULNAR_LENGTH_REFUS_REASON)

COULD NOT OBTAIN …………………………………..-2 (AN_MEASUREMENT_ULNAR_LENGTH_COM)

PROGRAMMER INSTRUCTIONS:

• GO TO APPENDIX A TO DETERMINE HARD AND SOFT EDITS:

• IF MEASUREMENT FALLS OUTSIDE MINIMUM OR MAXIMUM EXPECTED HUMERUS LENGTH BASED ON AGE AND GENDER, DISPLAY SOFT EDIT.

• IF MEASUREMENT IS <0 OR > 80 CM, DISPLAY HARD EDIT.

• IF VALID VALUE ENTERED, GO TO AN_MEASUREMENT_ULNAR_LENGTH_COM.

AN176/(AN_ULNAR_LENGTH_REFUS_REASON). ENTER REASON FOR REFUSING THE UPPER ARM CIRCUMFERENCE MEASURE.

CONCERN ABOUT DISCOMFORT 1 (AN_MEASUREMENT_ULNAR_ LENGTH_COM)

CHILD SICK 2 (AN_MEASUREMENT_ULNAR_ LENGTH_COM)

CHILD TIRED/UNHAPPY 3 (AN_MEASUREMENT_ULNAR_ LENGTH_COM)

NONE GIVEN -7 (AN_MEASUREMENT_ULNAR_ LENGTH_COM)

OTHER -5

AN177/(AN_ULNAR_LENGTH_REFUS_REASON_OTH).

SPECIFY:_____________________________

REFUSED -1

DON’T KNOW -2

AN180/(AN_MEASUREMENT_ ULNAR_ LENGTH_COM).

DATA COLLECTOR INSTRUCTION:

• SELECT ALL THAT APPLY.

• ENTER COMMENTS ABOUT ULNAR LENGTH MEASUREMENT.

NONE………………………………………… 1

MEASUREMENT TAKEN OVER THICK CLOTHING 2

MEASUREMENT TAKEN ON LEFT ARM 3

OTHER -5

PROGRAMMER INSTRUCTIONS:

• IF AN_ULNAR_LENGTH = -2, DISPLAY “PLEASE ENTER THE REASON YOU COULD NOT OBTAIN THE ULNAR LENGTH MEASURE.”

• IF RESPONSE CODE 1 SELECTED, DO NOT ALLOW SELECTION OF ADDITIONAL RESPONSE CODES AND GO TO AN_TRICEPS_SKINFOLD1.

• IF ANY COMBINATION OF RESPONSE CODES 2 AND 3 SELECTED, GO TO AN_TRICEPS_SKINFOLD1.

• IF RESPONSE CODE -5 SELECTED OR IF ANY COMBINATION OF RESPONSE CODES 2, 3 AND -5 SELECTED, GO TO AN_MEASUREMENT_ULNAR_LENGTH_COM_OTH.

AN185/(AN_MEASUREMENT_ULNAR_LENGTH_COM_OTH). DATA COLLECTOR MEASUREMENT COMMENTS

SPECIFY __________________________

PROGRAMMER INSTRUCTION:

• LIMIT FREE TEXT TO 255 CHARACTERS.

AN190/(AN_TRICEPS_SKINFOLD1). TRICEPS SKINFOLD MEASUREMENT 1

MEASURED TRICEPS SKINFOLD ………………………… __ __. __ cm.

EXCEEDS CAPACITY……………………………… -6 (AN_SUBSCAP_SKINFOLD1)

REFUSED …………………………………………… -1 (AN_SUBSCAP_SKINFOLD1)

COULD NOT OBTAIN …………………………….. -2 (AN_SUBSCAP_SKINFOLD1)

PROGRAMMER INSTRUCTIONS:

• GO TO APPENDIX A TO DETERMINE HARD AND SOFT EDITS:

  • IF MEASUREMENT FALLS OUTSIDE MINIMUM OR MAXIMUM EXPECTED TRICEPS SKINFOLD BASED ON AGE AND GENDER, DISPLAY SOFT EDIT.

  • IF MEASUREMENT IS < 0 OR > 67 CM, DISPLAY HARD EDIT.

AN195/(AN_TRICEPS_SKINFOLD2). TRICEPS SKINFOLD MEASUREMENT 2

MEASURED TRICEPS SKINFOLD ………………………… __ __. __ cm.

REFUSED ………………………………………………… -1

COULD NOT OBTAIN ………………………………….. -2

PROGRAMMER INSTRUCTIONS:

• GO TO APPENDIX A TO DETERMINE HARD AND SOFT EDITS:

  • IF MEASUREMENT FALLS OUTSIDE MINIMUM OR MAXIMUM EXPECTED TRICEPS SKINFOLD BASED ON AGE AND GENDER, DISPLAY SOFT EDIT.

  • IF MEASUREMENT IS < 0 OR > 67 CM, DISPLAY HARD EDIT.

• IF VALID MEASURES PROVIDED FOR AN_TRICEPS_SKINFOLD1 AND AN_TRICEPS_SKINFOLD2, CALCULATE THE DIFFERENCE BETWEEN AN_TRICEPS_SKINFOLD1 AND AN_TRICEPS_SKINFOLD2:

  • IF AN_TRICEPS_SKINFOLD1 AND AN_TRICEPS_SKINFOLD2 DIFFER BY ≤ 2.0 CM, CALCULATE THE MEAN OF AN_TRICEPS_SKINFOLD1 AND AN_TRICEPS_SKINFOLD2, SAVE AS AN_TRICEPS_SKINFOLD_MEAN, AND THEN GO TO AN_SUBSCAP_SKINFOLD1.

  • IF AN_TRICEPS_SKINFOLD1 AND AN_TRICEPS_SKINFOLD2 DIFFER BY > 2.0 CM, GO TO AN_TRICEPS_SKINFOLD3.

• IF AN_TRICEPS _SKINFOLD2 = -1:

  • SAVE AN_TRICEPS_SKINFOLD1 AS AN_TRICEPS_SKINFOLD_MEAN.

  • GO TO AN_TRI_SKIN_REFUS_REASON.

• IF AN_TRICEPS _SKINFOLD2 = -2:

  • SAVE AN_TRICEPS_SKINFOLD1 AS AN_TRICEPS_SKINFOLD_MEAN.

  • GO TO AN_TRICEPS_SKINFOLD3.

AN200/(AN_TRICEPS_SKINFOLD3). TRICEPS SKINFOLD MEASUREMENT 3

MEASURED TRICEPS SKINFOLD ………………………… __ __ . __ cm.

REFUSED ………………………………………………… -1

COULD NOT OBTAIN ………………………………….. -2

PROGRAMMER INSTRUCTIONS:

• GO TO APPENDIX A TO DETERMINE HARD AND SOFT EDITS:

  • IF MEASUREMENT FALLS OUTSIDE MINIMUM OR MAXIMUM EXPECTED TRICEPS SKINFOLD BASED ON AGE AND GENDER, DISPLAY SOFT EDIT.

  • IF MEASUREMENT IS < 0 OR > 67 CM, DISPLAY HARD EDIT.

• IF VALID MEASURES PROVIDED FOR AN_TRICEPS_SKINFOLD1, AN_TRICEPS_SKINFOLD2 AND AN_TRICEPS_SKINFOLD3:

  • IF THE TWO OUTSIDE MEASUREMENTS ARE EQUIDISTANT FROM THE MIDDLE MEASURE, THEN SAVE THE MIDDLE MEASURE AS AN_TRICEPS_SKINFOLD_MEAN.

  • IF THE TWO OUTSIDE MEASUREMENTS ARE NOT EQUIDISTANT FROM THE MIDDLE MEASURE, CALCULATE THE MEAN OF THE TWO CLOSEST MEASUREMENTS OF AN_TRICEPS_SKINFOLD1, AN_TRICEPS_SKINFOLD2, AND AN_TRICEPS_SKINFOLD3 AND SAVE THE VALUE AS AN_TRICEPS_SKINFOLD_MEAN.

  • GO TO AN_SUBSCAP_SKINFOLD1.

• IF AN_TRICEPS_SKINFOLD3= -1:

  • CALCULATE THE MEAN OF AN_TRICEPS_SKINFOLD1 AND AN_TRICEPS_SKINFOLD2, AND SAVE AS AN_TRICEPS_SKINFOLD_MEAN.

  • GO TO AN_TRI_SKIN_REFUS_REASON.

• OTHERWISE, IF AN_TRICEPS_SKINFOLD3= -2:

  • CALCULATE THE MEAN OF AN_TRICEPS_SKINFOLD1 AND AN_TRICEPS_SKINFOLD2, AND SAVE AS AN_TRICEPS_SKINFOLD_MEAN.

  • GO TO AN_SUBSCAP_SKINFOLD1.

AN201/(AN_TRI_SKIN_REFUS_REASON). ENTER REASON FOR REFUSING THE TRICEP SKINFOLD MEASURE.

CONCERN ABOUT DISCOMFORT 1 (AN_SUBSCAP_SKINFOLD1)

CHILD SICK 2 (AN_SUBSCAP_SKINFOLD1)

CHILD TIRED/UNHAPPY 3 (AN_SUBSCAP_SKINFOLD1)

NONE GIVEN -7 (AN_SUBSCAP_SKINFOLD1)

OTHER -5

AN202/(AN_TRI_SKIN_REFUS_REASON_OTH).

SPECIFY:_____________________________

REFUSED -1

DON’T KNOW -2

PROGRAMMER INSTRUCTION:

• LIMIT FREE TEXT TO 255 CHARACTERS.

AN205/(AN_SUBSCAP_SKINFOLD1). SUBSCAPULAR SKINFOLD MEASUREMENT 1

MEASURED SUBSCAPULAR SKINFOLD ………………………… __ __. __ cm.

EXCEEDS CAPACITY……………………………… -6

REFUSED …………………………………………… -1 (PROGRAMMER INSTRUCTIONS FOLLOWING AN_SUBSCAP_SKINFOLD3)

COULD NOT OBTAIN …………………………….. -2 (PROGRAMMER INSTRUCTIONS FOLLOWING AN_SUBSCAP_SKINFOLD3)

PROGRAMMER INSTRUCTIONS:

• GO TO APPENDIX A TO DETERMINE HARD AND SOFT EDITS:

  • IF MEASUREMENT FALLS OUTSIDE MINIMUM OR MAXIMUM EXPECTED SUBSCAPULAR SKINFOLD BASED ON AGE AND GENDER, DISPLAY SOFT EDIT.

  • IF MEASUREMENT IS < 0 OR > 67 CM, DISPLAY HARD EDIT.

AN210/(AN_SUBSCAP_SKINFOLD2). SUBSCAPULAR SKINFOLD MEASUREMENT 2

MEASURED SUBSCAPULAR SKINFOLD ……………………… __ __ . __ cm.

REFUSED ………………………………………………… -1

COULD NOT OBTAIN ………………………………….. -2

PROGRAMMER INSTRUCTIONS:

• GO TO APPENDIX A TO DETERMINE HARD AND SOFT EDITS:

  • IF MEASUREMENT FALLS OUTSIDE MINIMUM OR MAXIMUM EXPECTED SUBSCAPULAR SKINFOLD BASED ON AGE AND GENDER, DISPLAY SOFT EDIT.

  • IF MEASUREMENT IS < 0 OR > 67 CM, DISPLAY HARD EDIT.

• IF VALID MEASURES PROVIDED FOR AN_SUBSCAP_SKINFOLD1 AND AN_SUBSCAP_SKINFOLD2, CALCULATE THE DIFFERENCE BETWEEN AN_SUBSCAP_SKINFOLD1 AND AN_SUBSCAP_SKINFOLD2:

  • IF AN_SUBSCAP_SKINFOLD1 AND AN_SUBSCAP_SKINFOLD2 DIFFER BY ≤ 2.0 CM, CALCULATE THE MEAN OF AN_SUBSCAP_SKINFOLD1 AND AN_ SUBSCAP_SKINFOLD2, SAVE AS AN_SUBSCAP_SKINFOLD_MEAN, AND GO TO PROGRAMMER INSTRUCTIONS FOLLOWING AN_SUBSCAP_SKINFOLD3.

  • IF AN_SUBSCAP_SKINFOLD1 AND AN_SUBSCAP_SKINFOLD2 DIFFER BY > 2.0 cm, GO TO AN_SUBSCAP_SKINFOLD3.

• IF AN_SUBSCAP_SKINFOLD2 = -1 OR -2, SAVE AN_SUBSCAP_SKINFOLD1 AS AN_SUBSCAP_SKINFOLD_MEAN AND GO TO PROGRAMMER INSTRUCTIONS FOLLOWING AN_SUBSCAP_SKINFOLD3.

AN215/(AN_SUBSCAP_SKINFOLD3). SUBSCAPULAR SKINFOLD MEASUREMENT 3

MEASURED SUBSCAPULAR SKINFOLD ………………………… __ __ . __ cm.

REFUSED ………………………………………………… -1

COULD NOT OBTAIN ………………………………….. -2

PROGRAMMER INSTRUCTIONS:

• GO TO APPENDIX A TO DETERMINE HARD AND SOFT EDITS:

  • IF MEASUREMENT FALLS OUTSIDE MINIMUM OR MAXIMUM EXPECTED SUBSCAPULAR SKINFOLD BASED ON AGE AND GENDER, DISPLAY SOFT EDIT.

  • IF MEASUREMENT IS < 0 OR > 67 CM, DISPLAY HARD EDIT.

• IF VALID MEASURES PROVIDED FOR AN_SUBSCAP_SKINFOLD1, AN_SUBSCAP_SKINFOLD2, AND AN_SUBSCAP_SKINFOLD3:

  • IF THE TWO OUTSIDE MEASUREMENTS ARE EQUIDISTANT FROM THE MIDDLE MEASURE, THEN SAVE THE MIDDLE MEASURE AS AN_SUBSCAP_SKINFOLD_MEAN.

  • IF THE TWO OUTSIDE MEASUREMENTS ARE NOT EQUIDISTANT FROM THE MIDDLE MEASURE, CALCULATE THE MEAN OF THE TWO CLOSEST MEASUREMENTS OF AN_SUBSCAP_SKINFOLD1, AN_SUBSCAP_SKINFOLD2, AND AN_SUBSCAPS_SKINFOLD3 AND SAVE THE VALUE AS AN_SUBSCAP_SKINFOLD_MEAN.

  • GO TO AN_MEASUREMENT_SUB_SKIN_COM.

• IF AN_SUBSCAP_SKINFOLD3= -1:

  • CALCULATE THE MEAN OF AN_SUBSCAP_SKINFOLD1 AND AN_SUBSCAP_SKINFOLD2, AND SAVE AS AN_SUBSCAP_SKINFOLD_MEAN.

  • GO TO AN_SUB_SKIN_REFUS_REASON.

• OTHERWISE, IF AN_SUBSCAP_SKINFOLD3= -2:

  • CALCULATE THE MEAN OF AN_SUBSCAP_SKINFOLD1 AND AN_SUBSCAP_SKINFOLD2, AND SAVE AS AN_SUBSCAP_SKINFOLD_MEAN.

  • GO TO AN_MEASUREMENT_SUB_SKIN_COM.

AN216/(AN_SUB_SKIN_REFUS_REASON). ENTER REASON FOR REFUSING THE SUBSCAPULAR SKINFOLD MEASURE.

CONCERN ABOUT DISCOMFORT 1 (AN_MEASUREMENT_SUB_SKIN_COM)

CHILD SICK 2 (AN_MEASUREMENT_SUB_SKIN_COM)

CHILD TIRED/UNHAPPY 3 (AN_MEASUREMENT_SUB_SKIN_COM)

NONE GIVEN -7 (AN_MEASUREMENT_SUB_SKIN_COM)

OTHER -5

AN217/(AN_SUB_SKIN_REFUS_REASON_OTH).

SPECIFY:_____________________________

REFUSED -1

DON’T KNOW -2

AN180/(AN_MEASUREMENT_SUB_SKIN_COM).

DATA COLLECTOR INSTRUCTION:

• SELECT ALL THAT APPLY

• ENTER COMMENTS ABOUT SKINFOLD MEASUREMENTS.

NONE………………………………………… 1 (PROGRAMMER INSTRUCTIONS FOLLOWING AN_MEASUREMENT_SUB_SKIN_COM_OTH)

MEASUREMENT TAKEN OVER THICK CLOTHING 2 (PROGRAMMER INSTRUCTIONS FOLLOWING AN_MEASUREMENT_SUB_SKIN_COM_OTH)

OTHER -5

AN185/(AN_MEASUREMENT_SUB_SKIN_COM_OTH). DATA COLLECTOR MEASUREMENT COMMENTS

SPECIFY __________________________

PROGRAMMER INSTRUCTION:

• LIMIT FREE TEXT TO 255 CHARACTERS.

• CREATE AN_CONVERTED_WEIGHT BY CONVERTING MEAN WEIGHT IN KILOGRAMS TO POUNDS. AN_CONVERTED_WEIGHT = [AN_WEIGHT_MEAS_MEAN X 2.2046]. SAVE AN_CONVERTED_WEIGHT AS AN_CONVERTED_WEIGHT.

• CREATE AN_CONVERTED_WEIGHT_LBS AND AN_CONVERTED_WEIGHT_OZ BY CONVERTING AVERAGE WEIGHT IN KILOGRAMS TO POUNDS AND OUNCES. WEIGHT IN POUNDS = [AN_WEIGHT_MEAS_MEAN X 2.2046]. ENTER WHOLE NUMBER IN AND SAVE AS AN_COVERTED_WEIGHT_LBS. MULTIPLE DECIMAL FRACTION BY 16 AND ROUND TO NEAREST OUNCE. ENTER VALUE IN AND SAVE AS AN_CONVERTED_WEIGHT_OUNCE.

• CREATE AN_CONVERTED_RECUMB_LENGTH BY CONVERTING ADJUSTED RECUMBENT LENGTH IN CENTIMETERS TO INCHES. AN_CONVERTED_RECUMB_LENGTH = [AN_RECUMB_LENGTH_ADJUST X 0.39]. SAVE AN_CONVERTED_RECUMB_LENGTH AS AN_CONVERTED_RECUMB_LENGTH.

AN220/(AN_CONV_WEIGHT). WEIGHT IN POUNDS AND OUNCES.

PROGRAMMER INSTRUCTIONS:

• IF VALID MEASURE CALCULATED WHEN ANTHROPOMETRY INSTRUMENT, DISPLAY AN_CONVERTED_WEIGHT_LBS

• AND AN_CONVERTED_WEIGHT_OZ.

• OTHERWISE, IF VALID MEASURE COULD NOT BE OBTAINED, DISPLAY “COULD NOT BE OBTAINED”.

AN225/AN_CONV_RECUMBENT_LENGTH). RECUMBENT LENGTH IN INCHES.

PROGRAMMER INSTRUCTION:

• IF VALID MEASURE CALCULATED WHEN ANTHROPOMETRY MODULE ADMINISTERED, DISPLAY AN_CONVERTED_RECUMBENT_LENGTH.

• OTHERWISE, IF VALID MEASURE COULD NOT BE OBTAINED, DISPLAY “COULD NOT BE OBTAINED”.

AN230. Thank you for having {CHILD’S NAME/the child} complete these measures.

(TIME_STAMP_AN_ET) PROGRAMMER INSTRUCTION:

• INSERT DATE/TIME STAMP

APPENDIX A: ANTHROPOMETRY EDIT RANGES

Measure	Age (years)	Gender	Soft edit		Hard edit
			Low	High	Low	High
Standing Weight (kg)	< 1	M	5.4	12.1	0	200
		F	4.8	11.8	0	200
	1 - <2	M	8.7	16.5	0	200
		F	8.2	15.5	0	200
	2 - <3	M	10.5	18.3	0	200
		F	11.0	23.5	0	200
Recumbent Length (cm)	< 1	M	56.8	81.3	16	197.5
		F	54.5	78.8	16	197.5
	1 - <2	M	72.8	94.4	16	197.5
		F	71.3	91.4	16	197.5
	2 - <3	M	82.2	102.0	16	197.5
		F	82.0	102.0	16	197.5
Height Adjustment-Below waist	0 - 100	M	N/A	N/A	0	15.2
		F	N/A	N/A	0	15.2
Height Adjustment-Above waist	0 -100	M	N/A	N/A	0	15.2
		F	N/A	N/A	0	15.2
Femur Length (cm)	< 1	M			0	200
		F			0	200
	1 - <2	M			0	200
		F			0	200
	2 - <3	M	14.5	23.0	0	200
		F	15.2	23.3	0	200
Thigh Circumference (cm)	< 1	M			0	200
		F			0	200
	1 - <2	M			0	200
		F			0	200
	2 - <3	M	23.1	34.0	0	200
		F	23.8	36.1	0	200
Waist Circumference (cm)	< 1	M			0	200
		F			0	200
	1 - <2	M			0	200
		F			0	200
	2 - <3	M	41.2	55.6	0	200
		F	41.2	58.3	0	200
Head Circumference (cm)	0 - 0.5	M	38.8	48.8	0	70
		F	37.3	47.6	0	70
	0 - 100	M			0	70
	0 - 70	F			0	70
Humerus and Ulnar Length (cm)	< 1	M	10.0	16.8	0	80
		F	9.5	16.0	0	80
	1 - <2	M	13.3	19.0	0	80
		F	12.8	19.0	0	80
	2 - <3	M	15.3	20.5	0	80
		F	15.1	20.9	0	80
Upper Arm Circumference	< 1	M	12.2	18.1	0	70
		F	11.7	18.0	0	70
	1 - <2	M	13.2	19.3	0	70
		F	13.1	19.1	0	70
	2 - <3	M	13.9	19.4	0	70
		F	13.7	20.1	0	70
Triceps Skinfold (mm)	< 1	M	6	16	0	67
		F	6	16	0	67
	1 - <2	M	5	15	0	67
		F	6	16	0	67
	2 - <3	M	5	14	0	67
		F	6	16	0	67
Subscapular Skinfolds (mm)	< 1	M	5	13	0	67
		F	5	13	0	67
	1 - <2	M	4	12	0	67
		F	4	13	0	67
	2 - <3	M	4	11	0	67
		F	4	15	0	67

Public reporting burden for this collection of information is estimated to average 20 minutes per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. An agency may not conduct or sponsor, and a person is not required to respond to, a collection of information unless it displays a currently valid OMB control number. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to: NIH, Project Clearance Branch, 6705 Rockledge Drive, MSC 7974, Bethesda, MD 20892-7974, ATTN: PRA (0925-0593*). Do not return the completed form to this address.