Information Collection Request (ICR)
Safety Standard for Strollers and Carriages
Supporting Statement
Justification
Information to be collected and circumstances that make the collection of information necessary
Section 104(b) of the Consumer Product Safety Improvement Act of 2008 (CPSIA), Public Law 110-314, 122 Stat. 3016 (August 14, 2008), requires the Consumer Product Safety Commission (“Commission” or “CPSC”) to promulgate consumer product safety standards for durable infant or toddler products. These standards are to be “substantially the same as” applicable voluntary standards or more stringent than the voluntary standard if the Commission concludes that more stringent requirements would further reduce the risk of injury associated with the product. As directed by this statutory requirement, the Commission is proposing a safety standard for strollers and carriages incorporating by reference, with some modifications, the voluntary standard for strollers and carriages issued by ASTM International, ASTM F833-13.
Sections 8.1 and 9.1 of ASTM F833-13 contain requirements for marking, labeling, and instructional literature that are disclosure requirements, thus falling within the definition of “collections of information” at 5 C.F.R. § 1320.3(c). Section 8.1 of ASTM F833-13 requires that all strollers and carriages display:
Each product and the shipping container must have a permanent label or marking that identifies the name and address (city, state, and zip code) of the manufacturer, distributor, or seller.
A permanent code mark or other product identification shall be provided on the carrier and its package or shipping container, if multiple packaging is used. The code will identify the date (month and year) of manufacture and permit future identification of any given model.
Section 9.1 of ASTM F833-13 requires all firms supplying strollers and carriages to provide easy-to-read and understand instructions regarding assembly, maintenance, cleaning, use, and adjustments, where applicable.
Use and sharing of collected information
The information required in sections 8.1 and 9.1 of ASTM F833-13 is intended to address safety issues that might arise with the product. The information required in section 8.1 of ASTM F833-13 is intended to help the CPSC and the consumer identify the firm and the product, should a safety issue arise. The instructional literature required by section 9.1 ASTM F833-13 is meant to prevent safety problems by providing assembly and maintenance information to consumers.
Use of information technology (IT) in information collection
Information technology will not be used in these requirements. In the proposed rule, manufacturers are required to provide labeling, marking, and instructional literature according to ASTM F833-13. This disclosure is provided with the purchase of the product.
Efforts to identify duplication
Information being disclosed is manufacturer and product specific. To the extent that firms do not already comply with the voluntary standard, information provided by these requirements is not available through any other agency, organization, or individual.
Impact on small businesses
The costs of marking, labeling, and instructional literature associated with the standard for strollers and carriages may impact some small firms. However, the statute requiring this action does not contain an exemption for small firms.
As described in section 12 below, there are 86 firms known currently to be marketing strollers and carriages in the United States. Based on U.S. Small Business Administration guidelines, 51 are small firms—26 domestic manufacturers, 22 domestic importers, and three firms with unknown supply sources.
In regard to the burden associated with sections 8.1 and 9.1 of ASTM F833-13, for those already in compliance with the voluntary standard, there should be little to no modification of the labels, markings, and instructional literature necessary. If modification is necessary to meet the standard, the burden imposed by sections 8.1 and 9.1 should be minimal.
6. Consequences to federal program or policy activities if collection is not conducted or is conducted less frequently
Without the marking, labeling, and instructional literature requirements, the level of noncompliance and consumer misuse could increase significantly, resulting in an increase in the number of product-related deaths and injuries.
The lack of marking and labeling could complicate CPSC efforts to locate and recall noncomplying products and result in an increase in the number of product-related deaths and injuries.
7. Special circumstances requiring respondents to report information more often than quarterly or to prepare responses in fewer than 30 days
There are no special circumstances that will require respondents to produce labels or instructional material more often than quarterly or in fewer than 30 days.
8. Consultation outside the agency
The CPSC consulted several manufacturers to obtain their views on the information collection burden associated with the marking and label requirements. Additionally, the preamble to the proposed rule published on Month Day, Year (FR Citation) discusses the information collection burden and invites public comment on the CPSC’s estimates. The public comment period will close on Month Day, Year.
9. Decision to provide payment or gift
There is no payment or gift provided to respondents.
10. Assurance of confidentiality
There is no assurance of confidentiality. The information in the mark, label, and instructional literature is not confidential.
11. Questions of a sensitive nature
There are no questions of a sensitive nature.
12. Estimate of hour burden to respondents
Section 8 of ASTM F833-13 requires that the name of the manufacturer, distributor, or seller, and either the place of business (city, state, and mailing address, including zip code) or telephone number, or both, to be marked clearly and legibly on each product and its retail package. It further requires a code mark or other means that identifies the date (month and year, as a minimum) of manufacture.
CPSC is aware of 86 firms that supply strollers and carriages in the U.S. market. All 86 firms are assumed to use labels on their products and on their packaging already, but they might need to make some modifications to their existing labels. The estimated time required to make these modifications is about 1 hour per model. Each of these firms supplies an average of 6 different models of strollers and carriages; therefore, the estimated burden hours associated with labels is 1 hour x 86 firms x 6 models per firm = 516 annual hours. We estimate the hourly compensation for the time required to create and update labels is $27.12 (U.S. Bureau of Labor Statistics, “Employer Costs for Employee Compensation,” December 2012, Table 9, total compensation for all sales and office workers in goods-producing private industries: http://www.bls.gov/ncs/). Therefore, the estimated annual cost to industry associated with the labeling requirements is $13,993.92 ($27.12 per hour x 516 hours = $13,993.92). No operating, maintenance, or capital costs are associated with the collection.
Section 9.1 of ASTM F833-13 requires that all soft infant and carrier products must provide instructions with the product that are easy to read and understand. Where applicable, instructions for assembly, use, maintenance and cleaning of the product, and warnings, must also be included. Strollers and carriages are products that do not generally require installation, but require instruction for proper use, fit, and adjustment on a caregiver’s body. Under the OMB’s regulations (5 CFR 1320.3(b)(2)), the time, effort, and financial resources necessary to comply with a collection of information that would be incurred by persons in the “normal course of their activities” are excluded from a burden estimate, where an agency demonstrates that the disclosure activities required to comply are “usual and customary.” Therefore, because we are unaware of strollers and carriages that lack any instructions to the user about proper use, fit, and assembly, we estimate tentatively that there are no burden hours associated with section 9.1 of ASTM F833-13 because any burden associated with supplying instructions with strollers and carriages would be “usual and customary” and not within the definition of “burden” under the OMB’s regulations.
Based on this analysis, the proposed standard for strollers and carriages would impose a burden to industry of 516 hours at a cost of $13,993.92 annually.
13. Estimates of Other Total Annual Cost Burden to Respondents or Recordkeepers
There are no costs to respondents beyond those presented in Section A.12. There are no operating, maintenance, or capital costs associated with the collection.
14. Estimate of annualized costs to the federal government
The estimated annual cost of the information collection requirements to the federal government is approximately $3,522, which includes 60 staff hours to examine and evaluate the information as needed for Compliance activities. This is based on a GS-12 level salaried employee. The average hourly wage rate for a mid-level salaried GS-12 employee in the Washington, DC metropolitan area (effective as of January 2012) is $40.62 (GS-12, step 5). This represents 69.2 percent of total compensation (U.S. Bureau of Labor Statistics, “Employer Costs for Employee Compensation,” December 2012, Table 1, percentage of wages and salaries for all civilian management, professional, and related employees: http://www.bls.gov/ncs/). Adding an additional 30.8 percent for benefits brings average hourly compensation for a mid-level salaried GS-12 employee to $58.70. Assuming that approximately 60 hours will be required annually, this results in an annual cost of $3,522.
15. Program changes or adjustments
This is a new information collection request.
16. Plans for tabulation and publication
Not applicable.
17. Rationale for not displaying the expiration date for OMB approval
Not applicable.
Collection of Information Employing Statistical Methods
Not applicable.
| File Type | application/vnd.openxmlformats-officedocument.wordprocessingml.document |
| Author | CUSB |
| File Modified | 0000-00-00 |
| File Created | 2021-01-29 |