Download:
pdf |
pdfFederal Register / Vol. 79, No. 63 / Wednesday, April 2, 2014 / Notices
FPS to recover response costs incurred
through the date of entry of the decree.
Together, the decrees recover a total of
$2,157,000 toward the approximately
$2.6 million that the United States
incurred at the site.
The publication of this notice opens
a period for public comment on the
consent decrees. Comments should be
addressed to the Assistant Attorney
General, Environment and Natural
Resources Division, and should refer to
United States v. Clifton 2003, LLC, et al.,
D.J. Ref. No. 90–11–3–10618. All
comments must be submitted no later
than thirty (30) days after the
publication date of this notice.
Comments may be submitted either by
email or by mail:
U.S.C. 552b), hereby gives notice in
regard to the scheduling of open
meetings as follows:
Friday, April 11, 2014: 10 a.m.—
Issuance of Proposed Decisions in
claims against Iraq.
STATUS: Open.
All meetings are held at the Foreign
Claims Settlement Commission, 600 E
Street NW., Washington, DC. Requests
for information, or advance notices of
intention to observe an open meeting,
may be directed to: Patricia M. Hall,
Foreign Claims Settlement Commission,
600 E Street NW., Suite 6002,
Washington, DC 20579. Telephone:
(202) 616–6975.
To submit
comments:
Send them to:
[FR Doc. 2014–07455 Filed 3–31–14; 4:15 pm]
By email .......
pubcomment-ees.enrd@
usdoj.gov.
Assistant Attorney General,
U.S. DOJ—ENRD, P.O.
Box 7611, Washington, DC
20044–7611.
By mail .........
BILLING CODE 4410–BA–P
During the public comment period,
the consent decrees may be examined
and downloaded at this Justice
Department Web site: http://
www.usdoj.gov/enrd/Consent_
Decrees.html. We will provide a paper
copy of the consent decrees upon
written request and payment of
reproduction costs. Please mail your
request and payment to: Consent Decree
Library, U.S. DOJ—ENRD, P.O. Box
7611, Washington, DC 20044–7611.
Please enclose a check or money order
for $4.50 (25 cents per page
reproduction cost) for either the Clifton/
Hampshire decree or the WEA decree
(specifying which decree is being
requested), or $9.00 for both decrees,
payable to the United States Treasury.
Robert E. Maher, Jr.,
Assistant Section Chief, Environmental
Enforcement Section, Environment and
Natural Resources Division.
[FR Doc. 2014–07313 Filed 4–1–14; 8:45 am]
BILLING CODE 4410–15–P
DEPARTMENT OF JUSTICE
tkelley on DSK3SPTVN1PROD with NOTICES
Foreign Claims Settlement
Commission
[F.C.S.C. Meeting and Hearing Notice No.
04–14]
Sunshine Act Meeting
The Foreign Claims Settlement
Commission, pursuant to its regulations
(45 CFR part 503.25) and the
Government in the Sunshine Act (5
VerDate Mar<15>2010
Brian M. Simkin,
Chief Counsel.
17:01 Apr 01, 2014
Jkt 232001
DEPARTMENT OF LABOR
Occupational Safety and Health
Administration
[Docket No. OSHA–2011–0033]
Standard on the Control of Hazardous
Energy (Lockout/Tagout); Extension of
the Office of Management and
Budget’s (OMB) Approval of
Information Collection (Paperwork)
Requirements
Occupational Safety and Health
Administration (OSHA), Labor.
ACTION: Request for public comments.
AGENCY:
OSHA solicits public
comments concerning its proposal to
extend OMB approval of the
information collection requirements
specified in the Standard on the Control
of Hazardous Energy (Lockout/Tagout)
(29 CFR 1910.147).
DATES: Comments must be submitted
(postmarked, sent, or received) by June
2, 2014.
ADDRESSES:
Electronically: You may submit
comments and attachments
electronically at http://
www.regulations.gov, which is the
Federal eRulemaking Portal. Follow the
instructions online for submitting
comments.
Facsimile: If your comments,
including attachments, are not longer
than 10 pages you may fax them to the
OSHA Docket Office at (202) 693–1648.
Mail, hand delivery, express mail,
messenger, or courier service: When
using this method, you must submit a
copy of your comments and attachments
to the OSHA Docket Office, Docket No.
SUMMARY:
PO 00000
Frm 00077
Fmt 4703
Sfmt 4703
18583
OSHA–2011–0033, U.S. Department of
Labor, Occupational Safety and Health
Administration, Room N–2625, 200
Constitution Avenue NW., Washington,
DC 20210. Deliveries (hand, express
mail, messenger, and courier service)
are accepted during the Department of
Labor’s and Docket Office’s normal
business hours, 8:15 a.m. to 4:45 p.m.,
e.t.
Instructions: All submissions must
include the Agency name and the OSHA
docket number for the Information
Collection Request (ICR) (OSHA–2011–
0033). All comments, including any
personal information you provide, are
placed in the public docket without
change, and may be made available
online at http://www.regulations.gov.
For further information on submitting
comments see the ‘‘Public
Participation’’ heading in the section of
this notice titled SUPPLEMENTARY
INFORMATION.
Docket: To read or download
comments or other material in the
docket, go to http://www.regulations.gov
or the OSHA Docket Office at the
address above. All documents in the
docket (including this Federal Register
notice) are listed in the http://
www.regulations.gov index; however,
some information (e.g., copyrighted
material) is not publicly available to
read or download from the Web site. All
submissions, including copyrighted
material, are available for inspection
and copying at the OSHA Docket Office.
You may also contact Theda Kenney at
the address below to obtain a copy of
the ICR.
FOR FURTHER INFORMATION CONTACT:
Theda Kenney or Todd Owen,
Directorate of Standards and Guidance,
OSHA, U.S. Department of Labor, Room
N–3609, 200 Constitution Avenue NW.,
Washington, DC 20210; telephone (202)
693–2222.
SUPPLEMENTARY INFORMATION:
I. Background
The Department of Labor, as part of its
continuing effort to reduce paperwork
and respondent (i.e., employer) burden,
conducts a preclearance consultation
program to provide the public with an
opportunity to comment on proposed
and continuing information collection
requirements in accord with the
Paperwork Reduction Act of 1995 (44
U.S.C. 3506(c)(2)(A)). This program
ensures that information is in the
desired format, reporting burden (time
and costs) is minimal, collection
instruments are clearly understood, and
OSHA’s estimate of the information
collection burden is accurate. The
Occupational Safety and Health Act of
E:\FR\FM\02APN1.SGM
02APN1
tkelley on DSK3SPTVN1PROD with NOTICES
18584
Federal Register / Vol. 79, No. 63 / Wednesday, April 2, 2014 / Notices
1970 (the OSH Act) (29 U.S.C. 651 et
seq.) authorizes information collection
by employers as necessary or
appropriate for enforcement of the Act
or for developing information regarding
the causes and prevention of
occupational injuries, illnesses, and
accidents (29 U.S.C. 657). The OSH Act
also requires that OSHA obtain such
information with minimum burden
upon employers, especially those
operating small businesses, and to
reduce to the maximum extent feasible
unnecessary duplication of efforts in
obtaining information (29 U.S.C. 657).
The Standard specifies several
information collection requirements.
The following sections describe who
uses the information collected under
each requirement, as well as how they
use it. The purpose of these
requirements is to control the release of
hazardous energy sources while workers
service, maintain, or repair machines or
equipment when activation, start up, or
release of energy from an energy source
is possible; proper control of hazardous
energy sources prevent death or serious
injury among these workers.
Energy Control Procedure (paragraph
(c)(4)(i)). With limited exception,
employers must document the
procedures used to isolate from its
energy source and render inoperative,
any machine or equipment prior to
servicing, maintenance, or repair by
workers. These procedures are
necessary when activation, start up, or
release of stored energy from the energy
source is possible, and such release
could cause injury to the workers.
Paragraph (c)(4)(ii) states that the
required documentation must clearly
and specifically outline the scope,
purpose, authorization, rules, and
techniques workers are to use to control
hazardous energy, and the means to
enforce compliance. The document
must include at least the following
elements:
(A) A specific statement regarding the
use of the procedure;
(B) Detailed procedural steps for
shutting down, isolating, blocking, and
securing machines or equipment to
control hazardous energy,
(C) Detailed procedural steps for
placing, removing, and transferring
lockout or tagout devices, including the
responsibility for doing so; and,
(D) Requirements for testing a
machine or equipment to determine and
verify the effectiveness of lockout or
tagout devices, as well as other energy
control measures.
Protective Materials and Hardware
(paragraphs (c)(5)(ii)(D) and (c)(5)(iii)).
Paragraph (C)(5)(ii)(D) requires that
lockout and tagout devices indicate the
VerDate Mar<15>2010
17:01 Apr 01, 2014
Jkt 232001
identity of the employee applying it.
Paragraph (c)(5)(iii) requires that tags
warn against hazardous conditions if the
machine or equipment is energized. In
addition, the tag must include a legend
such as one of the following: Do Not
Start; Do Not Open; Do Not Close; Do
Not Energize; Do Not Operate.
Periodic Inspection Certification
Records (paragraph (c)(6)(ii)). Under
paragraph (c)(6)(i), employers are to
conduct inspections of energy control
procedures at least annually. An
authorized worker (other than an
authorized worker using the energy
control procedure that is the subject of
the inspection) is to conduct the
inspection and correct any deviations or
inadequacies identified. For procedures
involving either lockout or tagout, the
inspection must include a review,
between the inspector and each
authorized worker, of that worker’s
responsibilities under the procedure; for
procedures using tagout systems, the
review also involves affected workers,
and includes an assessment of the
workers’ knowledge of the training
elements required for these systems.
Paragraph (c)(6)(ii) requires employers
to certify the inspection by documenting
the date of the inspection and
identifying the machine or equipment
inspected, the workers included in the
inspection, and the worker who
performed the inspection.
Training Certification Records
(paragraph (c)(7)(iv)). Under paragraph
(c)(7)(iv), employers are to certify that
workers completed the required
training, and that this training is up-todate. The certification is to contain each
worker’s name and the training date.
Written certification of the training
assures the employer that workers
receive the training specified by the
Standard.
Disclosure of Inspection and Training
Certification Records (paragraphs
(c)(6)(ii) and (c)(7)(iv)). Under these
provisions, employers subject to an
OSHA inspection are required to
disclose inspection and training
certification records to the OSHA
compliance officer.
Notification of Employees (paragraph
(c)(9)). This provision requires the
employer or authorized worker to notify
affected workers prior to applying, and
after removing, a lockout or tagout
device from a machine or equipment.
Off-Site Personnel (Contractors, etc.)
(paragraph (f)(2)(i)). When the on-site
employer uses an off-site employer (e.g.,
a contractor) to perform the activities
covered by the scope and application of
the Standard, the two employers must
inform each other regarding their
respective lockout or tagout procedures.
PO 00000
Frm 00078
Fmt 4703
Sfmt 4703
II. Special Issues for Comment
OSHA has a particular interest in
comments on the following issues:
• Whether the proposed information
collection requirements are necessary
for the proper performance of the
Agency’s functions, including whether
the information is useful;
• The accuracy of OSHA’s estimate of
the burden (time and costs) of the
information collection requirements,
including the validity of the
methodology and assumptions used;
• The quality, utility, and clarity of
the information collected; and
• Ways to minimize the burden on
employers who must comply; for
example, by using automated or other
technological information collection
and transmission techniques.
III. Proposed Actions
OSHA is requesting that OMB extend
its approval of the information
collection requirements contained in the
Standard on the Control of Hazardous
Energy (Lockout/Tagout) (29 CFR
1910.147). The Agency is requesting an
adjustment decrease in the number of
burden hours from 2,989,421 hours to
2,646,702 hours, a total decrease of
342,719 burden hours. In addition,
OSHA is requesting an adjustment
decrease of $216,410 in operation and
maintenance costs (from $1,642,831 to
$1,426,421) associated with the
purchase of tags and ties by employers.
These decreases are based on updated
data showing a decrease in the number
of affected high impact establishments.
The Agency will summarize the
comments submitted in response to this
notice and will include this summary in
the request to OMB.
Type of Review: Extension of a
currently approved collection.
Title: Standard on the Control of
Hazardous Energy (Lockout/Tagout) (29
CFR 1910.147).
OMB Control Number: 1218–0150.
Affected Public: Business or other forprofits.
Number of Respondents: 730,706.
Frequency of Responses: Initially;
Annually; On occasion.
Total Responses: 72,337,270.
Average Time per Response: Varies
from 15 seconds (.004 hour) for an
employer or authorized worker to notify
affected workers prior to applying, and
after removing, a lockout/tagout device
from a machine or equipment to 80
hours for certain employers to develop
energy control procedures.
Estimated Total Burden Hours:
2,646,702.
Estimated Cost (Operation and
Maintenance): $1,426,422.
E:\FR\FM\02APN1.SGM
02APN1
Federal Register / Vol. 79, No. 63 / Wednesday, April 2, 2014 / Notices
IV. Public Participation—Submission of
Comments on This Notice and Internet
Access to Comments and Submissions
tkelley on DSK3SPTVN1PROD with NOTICES
You may submit comments in
response to this document as follows:
(1) Electronically at http://
www.regulations.gov, which is the
Federal eRulemaking Portal; (2) by
facsimile (fax); or (3) by hard copy. All
comments, attachments, and other
material must identify the Agency name
and the OSHA docket number for the
ICR (Docket No. OSHA–2011–0033).
You may supplement electronic
submissions by uploading document
files electronically. If you wish to mail
additional materials in reference to an
electronic or facsimile submission, you
must submit them to the OSHA Docket
Office (see the section of this notice
titled ADDRESSES). The additional
materials must clearly identify your
electronic comments by your name,
date, and the docket number so the
Agency can attach them to your
comments.
Because of security procedures, the
use of regular mail may cause a
significant delay in the receipt of
comments. For information about
security procedures concerning the
delivery of materials by hand, express
delivery, messenger, or courier service,
please contact the OSHA Docket Office
at (202) 693–2350, (TTY (877) 889–
5627).
Comments and submissions are
posted without change at http://
www.regulations.gov. Therefore, OSHA
cautions commenters about submitting
personal information such as social
security numbers and date of birth.
Although all submissions are listed in
the http://www.regulations.gov index,
some information (e.g., copyrighted
material) is not publicly available to
read or download from this Web site.
All submissions, including copyrighted
material, are available for inspection
and copying at the OSHA Docket Office.
Information on using the http://
www.regulations.gov Web site to submit
comments and access the docket is
available at the Web site’s ‘‘User Tips’’
link. Contact the OSHA Docket Office
for information about materials not
available from the Web site, and for
assistance in using the Internet to locate
docket submissions.
V. Authority and Signature
David Michaels, Ph.D., MPH,
Assistant Secretary of Labor for
Occupational Safety and Health,
directed the preparation of this notice.
The authority for this notice is the
Paperwork Reduction Act of 1995 (44
VerDate Mar<15>2010
17:01 Apr 01, 2014
Jkt 232001
U.S.C. 3506 et seq.) and Secretary of
Labor’s Order No. 1–2012 (77 FR 3912).
ACTION:
Signed at Washington, DC, on March 27,
2014.
David Michaels,
Assistant Secretary of Labor for Occupational
Safety and Health.
SUMMARY:
[FR Doc. 2014–07314 Filed 4–1–14; 8:45 am]
BILLING CODE 4510–26–P
NATIONAL AERONAUTICS AND
SPACE ADMINISTRATION
Office of Procurement; Public
Availability of the National Aeronautics
and Space Administration FY 2013
Service Contract Inventory (SCI)
National Aeronautics and
Space Administration.
ACTION: Notice of Public Availability of
the FY 2013 Service Contract Inventory,
PSC codes selected for FY 2013 SCI
Analysis, and FY 2012 Service Contract
Inventory Analysis.
AGENCY:
In accordance with Section
743 of Division C of the Consolidated
Appropriations Act of 2010 (Pub. L.
111–117), the National Aeronautics and
Space Administration (NASA) is
publishing this notice to advise the
public of the availability of its analysis
of FY 2012 Service Contract Inventory
and its FY 2013 Service Contract
Inventory. This inventory provides
information on service contract actions
over $25,000 that were accomplished in
FY 2013. The inventory has been
developed in accordance with guidance
issued on December 19, 2011, by the
Office of Management and Budget’s
Office of Federal Procurement Policy
(OFPP). NASA has posted documents
associated with the Service Contract
inventory, including the documents
addressed above, on the NASA Office of
Procurement homepage at the following
link: http://www.hq.nasa.gov/office/
procurement/scinventory/index.html.
Point of contact for this initiative is
Craig Bowers (202) 358–2235,
[email protected].
SUMMARY:
William McNally,
Assistant Administrator for Procurement.
[FR Doc. 2014–07007 Filed 3–27–14; 8:45 am]
BILLING CODE 7510–01–P
NATIONAL FOUNDATION ON THE
ARTS AND THE HUMANITIES
Arts Advisory Panel Meeting
National Endowment for the
Arts, National Foundation on the Arts
and Humanities.
AGENCY:
PO 00000
Frm 00079
Fmt 4703
Sfmt 9990
18585
Notice of meeting.
Pursuant to Section 10(a)(2) of
the Federal Advisory Committee Act
(Pub. L. 92–463), as amended, notice is
hereby given that five meetings of the
Arts Advisory Panel to the National
Council on the Arts will be held by
teleconference at the National
Endowment for the Arts, Washington,
DC 20506 as follows (all meetings are
Eastern time and ending times are
approximate):
Design (application review): This
meeting will be closed.
Dates: April 23, 2014. 2:00 p.m. to 5:00
p.m.
Design (application review): This
meeting will be closed.
Dates: April 24, 2014. 2:00 p.m. to 5:00
p.m.
Design (application review): This
meeting will be closed.
Dates: April 25, 2014. 2:00 p.m. to 5:00
p.m.
Design (application review): This
meeting will be closed.
Dates: May 1, 2014. 2:00 p.m. to 5:00
p.m.
Design (application review): This
meeting will be closed.
Dates: May 2, 2014. 2:00 p.m. to 5:00
p.m.
FOR FURTHER INFORMATION CONTACT:
Further information with reference to
these meetings can be obtained from Ms.
Kathy Plowitz-Worden, Office of
Guidelines & Panel Operations, National
Endowment for the Arts, Washington,
DC 20506; [email protected], or call
202/682–5691.
The
closed portions of meetings are for the
purpose of Panel review, discussion,
evaluation, and recommendations on
financial assistance under the National
Foundation on the Arts and the
Humanities Act of 1965, as amended,
including information given in
confidence to the agency. In accordance
with the determination of the Chairman
of February 15, 2012, these sessions will
be closed to the public pursuant to
subsection (c)(6) of section 552b of Title
5, United States Code.
SUPPLEMENTARY INFORMATION:
Dated: March 28, 2014.
Kathy Plowitz-Worden,
Panel Coordinator, National Endowment for
the Arts.
[FR Doc. 2014–07322 Filed 4–1–14; 8:45 am]
BILLING CODE 7537–01–P
E:\FR\FM\02APN1.SGM
02APN1
File Type | application/pdf |
File Modified | 2014-04-02 |
File Created | 2014-04-02 |