60 Day FR Notice (06-19-14)

Federal Register / Vol. 79, No. 118 / Thursday, June 19, 2014 / Notices
Because of security procedures, the
use of regular mail may cause a
significant delay in the receipt of
comments. For information about
security procedures concerning the
delivery of materials by hand, express
delivery, messenger, or courier service,
please contact the OSHA Docket Office
at (202) 693–2350, (TTY (877) 889–
5627).
Comments and submissions are
posted without change at http://
www.regulations.gov. Therefore, OSHA
cautions commenters about submitting
personal information such as social
security numbers and date of birth.
Although all submissions are listed in
the http://www.regulations.gov index,
some information (e.g., copyrighted
material) is not publicly available to
read or download from this Web site.
All submissions, including copyrighted
material, are available for inspection
and copying at the OSHA Docket Office.
Information on using the http://
www.regulations.gov Web site to submit
comments and access the docket is
available at the Web site’s ‘‘User Tips’’
link. Contact the OSHA Docket Office
for information about materials not
available from the Web site, and for
assistance in using the Internet to locate
docket submissions.
V. Authority and Signature
David Michaels, Ph.D., MPH,
Assistant Secretary of Labor for
Occupational Safety and Health,
directed the preparation of this notice.
The authority for this notice is the
Paperwork Reduction Act of 1995 (44
U.S.C. 3506 et seq.) and Secretary of
Labor’s Order No. 1–2012 (77 FR 3912).
Signed at Washington, DC, on June 13,
2014.
David Michaels,
Assistant Secretary of Labor for Occupational
Safety and Health.
[FR Doc. 2014–14329 Filed 6–18–14; 8:45 am]
BILLING CODE 4510–26–P

DEPARTMENT OF LABOR
Occupational Safety and Health
Administration

emcdonald on DSK67QTVN1PROD with NOTICES

[Docket No. OSHA–2011–0055]

Steel Erection; Extension of the Office
of Management and Budget’s (OMB)
Approval of Information Collection
(Paperwork) Requirements
Occupational Safety and Health
Administration (OSHA), Labor.
ACTION: Request for public comments.
AGENCY:

OSHA solicits public
comments concerning its proposal to

SUMMARY:

VerDate Mar<15>2010

17:25 Jun 18, 2014

Jkt 232001

extend OMB approval of the
information collection requirements
specified in the Standard on Steel
Erection (29 CFR part 1926, subpart R).
DATES: Comments must be submitted
(postmarked, sent, or received) by
August 18, 2014.
ADDRESSES:
Electronically: You may submit
comments and attachments
electronically at http://
www.regulations.gov, which is the
Federal eRulemaking Portal. Follow the
instructions online for submitting
comments.
Facsimile: If your comments,
including attachments, are not longer
than 10 pages you may fax them to the
OSHA Docket Office at (202) 693–1648.
Mail, hand delivery, express mail,
messenger, or courier service: When
using this method, you must submit a
copy of your comments and attachments
to the OSHA Docket Office, OSHA
Docket No. OSHA–2011–0055, U.S.
Department of Labor, Occupational
Safety and Health Administration,
Room N–2625, 200 Constitution Avenue
NW., Washington, DC 20210. Deliveries
(hand, express mail, messenger, and
courier service) are accepted during the
Department of Labor’s and Docket
Office’s normal business hours, 8:15
a.m. to 4:45 p.m., e.t.
Instructions: All submissions must
include the Agency name and the OSHA
docket number (OSHA–2011–0055) for
the Information Collection request (ICR).
All comments, including any personal
information you provide, are placed in
the public docket without change, and
may be made available online at
http://www.regulations.gov. For further
information on submitting comments,
see the ‘‘Public Participation’’ heading
in the section of this notice titled
SUPPLEMENTARY INFORMATION.
Docket: To read or download
comments or other material in the
docket, go to http://www.regulations.gov
or the OSHA Docket Office at the
address above. All documents in the
docket (including this Federal Register
notice) are listed in the http://
www.regulations.gov index; however,
some information (e.g., copyrighted
material) is not publicly available to
read or download from the Web site. All
submissions, including copyrighted
material, are available for inspection
and copying at the OSHA Docket Office.
You may also contact Theda Kenney at
the address below to obtain a copy of
the ICR.
FOR FURTHER INFORMATION CONTACT:
Theda Kenney or Todd Owen,
Directorate of Standards and Guidance,
OSHA, U.S. Department of Labor, Room

PO 00000

Frm 00042

Fmt 4703

Sfmt 4703

35189

N–3609, 200 Constitution Avenue NW.,
Washington, DC 20210; telephone (202)
693–2222.
SUPPLEMENTARY INFORMATION:
I. Background
The Department of Labor, as part of its
continuing effort to reduce paperwork
and respondent (i.e., employer) burden,
conducts a preclearance consultation
program to provide the public with an
opportunity to comment on proposed
and continuing information collection
requirements in accord with the
Paperwork Reduction Act of 1995
(PRA–95) (44 U.S.C. 3506(c)(2)(A)). This
program ensures that information is in
the desired format, reporting burden
(time and costs) is minimal, collection
instruments are clearly understood, and
OSHA’s estimate of the information
collection burden is accurate. The
Occupational Safety and Health Act of
1970 (the OSH Act) (29 U.S.C. 651 et
seq.) authorizes information collection
by employers as necessary or
appropriate for enforcement of the Act
or for developing information regarding
the causes and prevention of
occupational injuries, illnesses, and
accidents (29 U.S.C. 657). The OSH Act
also requires that OSHA obtain such
information with minimum burden
upon employers, especially those
operating small businesses, and to
reduce to the maximum extent feasible
unnecessary duplication of efforts in
obtaining information (29 U.S.C. 657).
Section 1926.752(a)(1). Description of
the requirement. Based on the results of
a specified method for testing fieldcured samples, the controlling
contractor must provide the steel erector
with written notification that the
concrete in the footings, piers, and
walls, or the mortar in the masonry
piers and walls, is at 75% of its
minimum compressive-design strength
or has sufficient strength to support
loads imposed during steel erection.
Note: This is not and will not be
enforced for mortar in piers and walls
until OSHA defines an appropriate
substitute or until an appropriate
American Society for Testing and
Materials (ASTM) test method is
developed.
Sections 1926.752(a)(2) and
1926.755(b)(1). Description of the
requirements. Under § 1926.752(a)(2),
the controlling contractor, before it
authorizes commencement of steel
erection, must notify the steel erector in
writing that any repairs, replacements,
and modifications to anchor bolts (rods)
have been made in accord with
§ 1926.755(b)(1) which requires that the
controlling contractor obtain approval
from the project structural engineer of

E:\FR\FM\19JNN1.SGM

19JNN1

emcdonald on DSK67QTVN1PROD with NOTICES

35190

Federal Register / Vol. 79, No. 118 / Thursday, June 19, 2014 / Notices

record for the repairs, replacements, and
modifications.
Section 1926.753(c)(5). Description of
the requirement. Employers must not
deactivate safety latches on hooks or
make them inoperable except for the
situation when a qualified rigger
determines that it is safer to hoist and
place purlins and single joists by doing
so; or except when equivalent
protection is provided in the sitespecific erection plan.
Section 1926.753(e)(2). Description of
the requirement. Employers must have
the maximum capacity of the total
multiple-lift rigging assembly, as well as
each of its individual attachment points,
certified by the manufacturer or a
qualified rigger.
Sections 1926.755(b)(2) and
1926.755(b)(1). Description of the
requirements. Under § 1926.755(b)(2),
throughout steel erection the controlling
contractor must notify the steel erector
in writing of additional repairs,
replacements, and modifications of
anchor bolts (rods); § 1926.755(b)(1)
requires that these repairs, replacements
and modifications not be made without
approval from the project structural
engineer of record.
Section 1926.757(a)(4). Description of
the requirement. If steel joists at or near
columns span more than 60 feet,
employers must set the joists in tandem
with all bridging installed. However, the
employer may use an alternative
method of erection if a qualified person
develops the alternative method, it
provides equivalent stability, and the
employer includes the method in the
site-specific erection plan.
Section 1926.757(a)(7). Description of
the requirement. Employers must not
modify steel joists or steel joist girders
in a way that affects their strength
without the approval of the project
structural engineer of record.
Sections 1926.757(a)(9) and
1926.758(g). Description of the
requirements. An employer can use a
steel joist, steel joist girder, purlin, or
girt as an anchorage point for a fall
arrest system only with the written
approval of a qualified person.
Section 1926.757(e)(4)(i). Description
of the requirement. An employer must
install and anchor all bridging on joists
and attach all joist bearing ends before
placing a bundle of decking on the
joists, unless: A qualified person
determines that the structure or portion
of the structure is capable of supporting
the bundle, the employer documents
this determination in the site-specific
erection plan and follows the additional
requirements specified in
§ 1926.757(e)(4)(ii)–(vi).

VerDate Mar<15>2010

17:25 Jun 18, 2014

Jkt 232001

Section 1926.760(e) and (e)(1).
Description of the requirement. The
steel erector can leave its fall protection
at the jobsite after completion of the
erection activity only if the controlling
contractor or its authorized
representative directs the steel erector to
do so and inspects and accepts
responsibility for the fall protection.
Section 1926.761. Description of the
requirement. Employers must have
qualified persons provide training to all
workers exposed to fall hazards. This
training is to include: Recognition of fall
hazards at the worksite; use and
operation of guardrail systems, personal
fall arrest systems, positioning device
systems, fall restraint systems, safety net
systems, and other fall protection
implemented at the worksite; correct
procedures for erecting, maintaining,
disassembling, and inspecting these fall
protection systems; procedures that
prevent falls to lower levels, and
through or into holes and openings in
walking-working surfaces; and the fall
protection requirements of this Subpart.
In addition, employers are to provide
special training to workers engaged in
multiple-lift rigging procedures (i.e., to
recognize multi-lift hazards and in the
proper procedures and equipment to
perform multiple lifts), connector
procedures (i.e., to identify connector
hazards and in the requirements of
§§ 1926.756(c) and 1926.760(b)), and
controlled decking zone (CDZ)
procedures (i.e., knowledge of CDZ
hazards and in the requirements of
§§ 1926.754(e) and 1926.760(c)).
Paragraph (c)(4)(ii) of Appendix G to
Subpart R. Description of the
requirement. This mandatory appendix
duplicates the regulatory requirements
of § 1926.502 (‘‘Fall protection systems
criteria and practices’’), notably the
requirements specified in paragraph
(c)(4)(ii). This paragraph addresses the
certification of safety nets as an option
available to employers who can
demonstrate that performing a drop test
on safety nets is unreasonable. This
provision allows such employers to
certify that their safety nets, including
the installation of the nets, protect
workers at least as well as safety nets
that meet the drop test criteria. The
employer must complete the
certification process prior to using the
net for fall protection, and the certificate
must include the following information:
Identification of the net and the type of
installation used for the net; the date the
certifying party determined that the net
and its installation would meet the
drop-test criteria; and the signature of
the party making this determination.
The most recent certificate must be
available at the jobsite for inspection.

PO 00000

Frm 00043

Fmt 4703

Sfmt 4703

II. Special Issues for Comment
OSHA has a particular interest in
comments on the following issues:
• Whether the proposed information
collection requirements are necessary
for the proper performance of the
Agency’s functions, including whether
the information is useful;
• The accuracy of OSHA’s estimate of
the burden (time and costs) of the
information collection requirements,
including the validity of the
methodology and assumptions used;
• The quality, utility, and clarity of
the information collected; and
• Ways to minimize the burden on
employers who must comply; for
example, by using automated or other
technological information collection
and transmission techniques.
III. Proposed Actions
The Agency is requesting that OMB
extend its approval of the information
collection requirements contained in the
Standard on Steel Erection (29 CFR part
1926, subpart R). The Agency is
requesting an adjustment decrease of
2,203 burden hours (from 23,602 hours
to 21,399 hours). This decrease is due to
a decline in worksites associated with
this subpart from 15,578 to 13,864.
Type of Review: Extension of a
currently approved collection.
Title: Steel Erection (29 CFR part
1926, subpart R).
OMB Control Number: 1218–0241.
Affected Public: Business or other forprofits.
Number of Respondents: 13,864.
Frequency of Responses: On occasion,
annually; triennially.
Number of Responses: 72,317.
Average Time per Response: Varies
from one minute (.02 hour) for a
controlling contractor to inform a steel
erector to leave fall protection at the
jobsite to five hours for a project
engineer to do research and analysis to
provide approval for modifications to
steel joists or joist girders.
Estimated Total Burden Hours:
21,399.
Estimated Cost (Operation and
Maintenance): $0.
IV. Public Participation—Submission of
Comments on This Notice and Internet
Access to Comments and Submissions
You may submit comments in
response to this document as follows:
(1) Electronically at http://
www.regulations.gov, which is the
Federal eRulemaking Portal; (2) by
facsimile (fax); or (3) by hard copy. All
comments, attachments, and other
material must identify the Agency name
and the OSHA docket number for the

E:\FR\FM\19JNN1.SGM

19JNN1

Federal Register / Vol. 79, No. 118 / Thursday, June 19, 2014 / Notices
ICR (Docket No. OSHA–2011–0055).
You may supplement electronic
submissions by uploading document
files electronically. If you wish to mail
additional materials in reference to an
electronic or facsimile submission, you
must submit them to the OSHA Docket
Office (see the section of this notice
titled ADDRESSES). The additional
materials must clearly identify your
electronic comments by your name,
date, and the docket number so the
Agency can attach them to your
comments.
Because of security procedures, the
use of regular mail may cause a
significant delay in the receipt of
comments. For information about
security procedures concerning the
delivery of materials by hand, express
delivery, messenger, or courier service,
please contact the OSHA Docket Office
at (202) 693–2350, (TTY (877) 889–
5627).
Comments and submissions are
posted without change at http://
www.regulations.gov. Therefore, OSHA
cautions commenters about submitting
personal information such as social
security numbers and date of birth.
Although all submissions are listed in
the http://www.regulations.gov index,
some information (e.g., copyrighted
material) is not publicly available to
read or download from this Web site.
All submissions, including copyrighted
material, are available for inspection
and copying at the OSHA Docket Office.
Information on using the http://
www.regulations.gov Web site to submit
comments and access the docket is
available at the Web site’s ‘‘User Tips’’
link. Contact the OSHA Docket Office
for information about materials not
available from the Web site, and for
assistance in using the Internet to locate
docket submissions.
V. Authority and Signature

emcdonald on DSK67QTVN1PROD with NOTICES

David Michaels, Ph.D., MPH,
Assistant Secretary of Labor for
Occupational Safety and Health,
directed the preparation of this notice.
The authority for this notice is the
Paperwork Reduction Act of 1995 (44
U.S.C. 3506 et seq.) and Secretary of
Labor’s Order No. 1–2012 (77 FR 3912).
Signed at Washington, DC, on June 13,
2014.
David Michaels,
Assistant Secretary of Labor for Occupational
Safety and Health.
[FR Doc. 2014–14330 Filed 6–18–14; 8:45 am]
BILLING CODE 4510–26–P

VerDate Mar<15>2010

17:25 Jun 18, 2014

Jkt 232001

NATIONAL ARCHIVES AND RECORDS
ADMINISTRATION
[NARA–2014–038]

Agency Information Collection
Activities: Submission for OMB
Review; Comment Request
National Archives and Records
Administration (NARA).
ACTION: Notice of information collection
renewal request.
AGENCY:

NARA is giving public notice
that the agency has submitted to OMB
for approval the information collection
described in this notice. NARA invites
the public to comment on the proposed
information collection pursuant to the
Paperwork Reduction Act of 1995.
DATES: Written comments must be
submitted to OMB at the address below
on or before July 21, 2014 to be assured
of consideration.
ADDRESSES: Send comments to Mr.
Nicholas A. Fraser, Desk Officer for
NARA, Office of Management and
Budget, New Executive Office Building,
Washington, DC 20503; fax: 202–395–
5167; or electronically mailed to
[email protected].
FOR FURTHER INFORMATION CONTACT:
Requests for additional information or
copies of the proposed information
collections and supporting statements
should be directed to Tamee Fechhelm
at telephone number 301–837–1694 or
fax number 301–713–7409.
SUPPLEMENTARY INFORMATION: Pursuant
to the Paperwork Reduction Act of 1995
(Pub. L. 104–13), NARA invites the
general public and other Federal
agencies to comment on proposed
information collections. NARA
published a notice of proposed
collection for this information collection
on April 9, 2014 (79 FR 19656 and
19657). No comments were received.
NARA has submitted the described
information collection to OMB for
approval.
In response to this notice, comments
and suggestions should address one or
more of the following points: (a)
Whether the proposed information
collection is necessary for the proper
performance of the functions of NARA;
(b) the accuracy of NARA’s estimate of
the burden of the proposed information
collection; (c) ways to enhance the
quality, utility, and clarity of the
information to be collected; (d) ways to
minimize the burden of the collection of
information on respondents, including
the use of information technology; and
(e) whether small businesses are
affected by this collection. In this
notice, NARA is soliciting comments
SUMMARY:

PO 00000

Frm 00044

Fmt 4703

Sfmt 4703

35191

concerning the following information
collection:
Title: Order Forms for Genealogical
Research in the National Archives.
OMB number: 3095–0027.
Agency form numbers: NATF Forms
84, 85, and 86.
Type of review: Regular.
Affected public: Individuals or
households.
Estimated number of respondents:
13,525.
Estimated time per response: 10
minutes.
Frequency of response: On occasion.
Estimated total annual burden hours:
2,254.
Abstract: NARA receives a large
volume of requests for these records and
needs to obtain specific information
from the researcher to search for the
sought records. Using a standard form to
for the requests and the needed
information is necessary for NARA to
handle the volume of requests in a
timely fashion. As a convenience, the
form also allows researchers to provide
credit card information to authorize
billing and expedited mailing of the
copies. You can also use Order Online!
(http://www.archives.gov/research_
room/obtain_copies/military_and_
genealogy_order_forms.html) to
complete the forms and order the
copies.
Dated: June 11, 2014.
Swarnali Haldar,
Acting Executive for Information Services/
CIO.
[FR Doc. 2014–14277 Filed 6–18–14; 8:45 am]
BILLING CODE 7515–01–P

NATIONAL SCIENCE FOUNDATION
Advisory Committee for Mathematical
and Physical Sciences Notice of
Meeting
In accordance with Federal Advisory
Committee Act (Pub. L. 92–463, as
amended), the National Science
Foundation announces the following
meeting:
Name: Advisory Committee for
Mathematical and Physical Sciences (#66).
Date/Time: July 18, 2014: 12:30 p.m. to
5:30 p.m.
Place: National Science Foundation, 4201
Wilson Boulevard, Suite 1235, Arlington,
Virginia 22230.
To help facilitate your entry into the
building, contact Caleb Autrey (cautrey@
nsf.gov). Your request should be received on
or prior to July 14, 2014.
Virtual attendance will be supported. For
detailed instructions, visit the meeting Web
site at http://www.nsf.gov/events/event_
summ.jsp?cntn_id=130169&org=MPS.
Type of Meeting: Open, Virtual.

E:\FR\FM\19JNN1.SGM

19JNN1