Catcher vessel eLog (new)

Alaska Interagency Electronic Reporting System (IERS)

eLogbook Instructions for eLandings

Catcher vessel eLog (new)

OMB: 0648-0515

Document [pdf]
Download: pdf | pdf
03/03/2011 
eLogbook Instructions for eLandings 

        
 

             OMB 0648‐0213 
     Expiration Date:  03/31/2015 

eLogbook Instructions for eLandings 

U.S. Department of Commerce/NOAA
National Marine Fisheries Service (NMFS)
P.O. Box 21668
Juneau, Alaska 99802-1668

_____________________________________________________________________________________________
Currently the electronic logbook (eLogbook) in eLandings is only available for trawl catcher/processor's (C/P's). The
eLogbook replaces the paper DCPL and is required for trawl C/P's in the AFA fleet or trawl C/P's that are fishing CDQ
pollock in the Bering Sea. Daily logbook entries are submitted to NMFS just like daily production and landing reports.

In the event of an internet outage, online logbook forms can be downloaded at
http://www.alaskafisheries.noaa.gov/rr/log.htm

•

Please note that it is not a replacement for your eLogbook entry, just a placeholder until you can submit your
logbook information in eLandings.

• We advise you download this PDF form and save it to your computer.
____________________________________________________________________________________________

Page 1 of 20 
 

03/03/2011 
eLogbook Instructions for eLandings 

        
 

             OMB 0648‐0213 
     Expiration Date:  03/31/2015

Registering your logbook
Step One
•

Login to eLandings at https://elandings.alaska.gov/

•

On the Reports Menu locate and click on the Register Logbook button

Step Two
•

You will be directed to the Register Logbook screen where you'll need to select the Year,
Weight Units, and Depth Units that you want to apply to your logbook for 2011

•

Once you've made your selections, click Register Logbook

Page 2 of 20 
 

03/03/2011 
eLogbook Instructions for eLandings 

        
 

             OMB 0648‐0213 
     Expiration Date:  03/31/2015 

•

You will be directed to the Reports Menu screen where you will see a message telling you your
logbook was registered

•

Locate and click on the Current Year Logbook button

Start a Voyage & Go active
Start a voyage
Until you enter New Voyage data and Go Active, you will not see any dates on the eLogbook main
screen.
•

The primary navigation screen will be the eLogbook screen

•

Locate and click on the New Voyage button

Page 3 of 20 
 

03/03/2011 
eLogbook Instructions for eLandings 

        
 

•

The Voyage Entry screen will come up

•

Enter the following information:
Voyage start date
Number of crew on the vessel (Include all persons on the vessel minus the Observers)
Vessel operator
Primary observer (If you do not have Observers on board, you can leave this field blank)
Primary observer cruise number (If unknown, enter any number and go back and edit later)
Secondary observer (If you do not have Observers on board, you can leave this field blank)
Secondary observer cruise number (If unknown, enter any number and go back and
edit later)

•

Click on Save

Go Active
•

On the eLogbook screen, click on the Go Active button

•

Enter the date which indicates the beginning of your fishing activity

•

Click on Save

Page 4 of 20 
 

             OMB 0648‐0213 
     Expiration Date:  03/31/2015 

03/03/2011 
eLogbook Instructions for eLandings 

        
 

             OMB 0648‐0213 
     Expiration Date:  03/31/2015

Enter Gear
•

Before you can make haul entries into your logbook, you need to enter the fishing gear type

•

You will also need to follow these instructions to change your gear type as needed; there is no
other place within the eLogbook to change your gear code.

•

On the eLogbook screen, locate and click on the Add Gear button

•

On the Gear Entry screen, enter your gear type and click on Save

Page 5 of 20 
 

03/03/2011 
eLogbook Instructions for eLandings 

        
 

             OMB 0648‐0213 
     Expiration Date:  03/31/2015 

Adding Comments
•

You can add comments to a particular day by going to the main eLogbook page and clicking on
the date highlighted in blue text

•

Locate and click on the Add Comment button near the bottom of the screen

Page 6 of 20 
 

03/03/2011 
eLogbook Instructions for eLandings 

        
 

•

You should now be on the Comment Entry screen

•

Double check to be sure you're on the right date, enter your comment and click Save

Page 7 of 20 
 

             OMB 0648‐0213 
     Expiration Date:  03/31/2015 

03/03/2011 
eLogbook Instructions for eLandings 

        
 

             OMB 0648‐0213 
     Expiration Date:  03/31/2015 

Entering Hauls
•

On the main eLogbook screen, click on the day you want to enter fishing activity

•

You will be directed to the eLogbook Entries screen

•

Locate and click on the Add Haul button

Page 8 of 20 
 

03/03/2011 
eLogbook Instructions for eLandings 

        
 

             OMB 0648‐0213 
     Expiration Date:  03/31/2015 

On the Haul Deploy Entry screen enter the following information:
•

Haul Number: must be in sequential order

•

Management program - select from the drop down list

•

Management Program ID - only enter the ID if you selected AFA, CDQ, or RPP as the
management program. The management program ID values for AFA and CDQ ID's are:
Description

Management
Program

Management
Program ID

AFA

200

AFA catcher/processors

AFA

300

AFA motherships

CDQ

51

Aleutian Pribilof Island Community Development
Association

CDQ

52

Bristol Bay Economic Development Corporation

CDQ

53

Central Bering Sea Fishermen's Association

CDQ

54

Coastal Villages Region Fund

CDQ

55

Norton Sound Economic Development Corporation

CDQ

56

Yukon Delta Fisheries Development Association

 
Helpful Hint!
Management Program codes and Management Program ID's can be found by clicking on
the Codes link

•

Gear deploy time
The time should be entered in military format, and you can enter time with or without a colon
(e.g. either of these formats are acceptable: 1225 or 12:25)

Page 9 of 20 
 

03/03/2011 
eLogbook Instructions for eLandings 
•

        
 

             OMB 0648‐0213 
     Expiration Date:  03/31/2015 

Begin Latitude and longitude
Below is a table that lists acceptable lat/long formats, make sure you have a single space
between degrees and minutes (where dd = degrees, mm = minutes, ss = seconds,
N S E W = direction, +/- )

Latitude

Longitude

dd mm ss N ddd mm ss W
dd mm.m N ddd mm.m W
N dd mm ss W ddd mm ss
dd mm.m

+ddd mm.m

dd.dddd N

ddd.dddd W

N dd.dddd

W ddd.dddd

+dd.dddd

+ddd.dddd

dd mm

-ddd mm

•

Enter the target species code

•

Click Save when you've completed your entries

You will be returned to the Haul Deploy Entry screen

Page 10 of 20 
 

03/03/2011 
eLogbook Instructions for eLandings 

•

•

        
 

.
In order to enter your haul retrieval information you'll need to locate and click on the Haul 1 text
highlighted in blue on the left side of your screen.

Once you can see the haul deploy data, you will then click on the Add Retrieval button at the
bottom of the screen

Page 11 of 20 
 

             OMB 0648‐0213 
     Expiration Date:  03/31/2015 

03/03/2011 
eLogbook Instructions for eLandings 

        
 

             OMB 0648‐0213 
     Expiration Date:  03/31/2015

On the Haul Retrieval Entry screen enter the following:
•

Gear retrieval time

•

End latitude and longitude

•

Federal reporting area - the program will autofill the Federal reporting area based on your gear
deployment latitude & longitude
You are required to enter the Federal reporting area where the gear was retrieved
If your gear retrieval was in a different area, you can override the federal reporting area by
editing that field

•

Special reporting area - Use the drop-down list to choose either COBLZ, RKCSA (if applicable)

•

Average sea depth and gear depth

•

Hail weight: enter the estimated hail weight of the haul within 2 hours of retrieving your gear; then,
once it is available, edit the hail weight and provide the scale weight of all the species in the haul
(i.e. the weight of everything that went across the scale)

•

Click Save when you've completed your entries

Page 12 of 20 
 

03/03/2011 
eLogbook Instructions for eLandings 

        
 

             OMB 0648‐0213 
     Expiration Date:  03/31/2015 

How to enter hauls that cross days
•

If you deploy your gear on 1 day and retrieve it on another day, then you need to report this
information in your logbook

•

In this scenario, on the main eLogbook screen, click on the day you deployed the gear

Page 13 of 20 
 

03/03/2011 
eLogbook Instructions for eLandings 

        
 

•

Now locate and click on the Haul text highlighted in blue

•

Now locate and click on the Add Retrieval button

•

You can see that the Gear Deploy Time and date read 7/11 at 20:40pm

•

In the Gear Retrieval Time field enter the month/day, hit the space bar once and enter the time
(for example: 7/13 00:50)

•

Continue by entering information in the remaining fields and click Save

Page 14 of 20 
 

             OMB 0648‐0213 
     Expiration Date:  03/31/2015

03/03/2011 
eLogbook Instructions for eLandings 

        
 

•

Now you should see your completed and saved haul reflecting gear deployment on one day and
gear retrieval on the following day

•

You can now enter catch lines as needed

Page 15 of 20 
 

             OMB 0648‐0213 
     Expiration Date:  03/31/2015 

03/03/2011 
eLogbook Instructions for eLandings 

        
 

             OMB 0648‐0213 
     Expiration Date:  03/31/2015 

Adding IR/IU Species & Salmon Prohibited Species Catch
(PSC)
How to add catch items
•

On the eLogbook Entries screen locate the haul number where you need to enter IR/IU (pacific
cod and/or pollock) or PSC (salmon only) catch

•

Locate and click on the Haul text highlighted in blue

•

You will be taken to the Haul Deploy Entry screen

•

Locate and click on the Add Catch button at the bottom of the screen

Page 16 of 20 
 

03/03/2011 
eLogbook Instructions for eLandings 

        
 

             OMB 0648‐0213 
     Expiration Date:  03/31/2015 

•

Now you should be on the Catch Entry screen

•

Scroll down the page until you see the catch line item fields

•

If applicable, enter the species code of IR/IU species and estimated total round weight. You also
need to enter a disposition code (e.g. 60 for sold).

•

If you are an AFA catcher/processor or any catcher/processor harvesting CDQ pollock, then you
must record prohibited species catch (PSC) and discard disposition of all salmon species in each
haul. Record salmon PSC in number of animals. All other discards, except salmon, should be
recorded on your daily production report.

•

Once you've completed entries for all your catch lines, click on Save

How to Print your Logbook Pages
•

You are required to print out daily copies of your logbook entries by noon the following day.
Print out two copies, one for the vessel and one for the Observers.
Make sure to sign and date all eLogbook pages

•

Once you have completed your logbook entries for the day, locate the Display PDF button at the
bottom of the screen and click on it

Page 17 of 20 
 

03/03/2011 
eLogbook Instructions for eLandings 

•

        
 

You will get a page that looks similar to the one below

Page 18 of 20 
 

             OMB 0648‐0213 
     Expiration Date:  03/31/2015 

03/03/2011 
eLogbook Instructions for eLandings 

        
 

             OMB 0648‐0213 
     Expiration Date:  03/31/2015 

Making Edits
•

In the event you realize you made a mistake while performing data entry in the logbook pages,
you can easily go back to the specific entry and make changes.
NOTE: You cannot delete logbook entries; so if you accidentally added a catch entry or a
haul on the incorrect date, you will not be able to remove them!
You can account for the mistaken entry by adding a comment on the haul date explaining
what happened

•

For haul deployment edits simply locate the haul number on the main eLogbook page and click
on the text highlighted in blue

•

Any fields that allow you to change the data are editable

•

In order to edit your retrieval data you will need to be on the actual Haul Deploy Entry screen
and click on the Edit Retrieval button

Page 19 of 20 
 

03/03/2011 
eLogbook Instructions for eLandings 

        
 

•

To edit voyage data you need to be on the main eLogbook screen

•

Find the Edit Voyage button and click on it to make changes

•

Note that as you save each page, the logbook data is saved in the NMFS database, so when you
make changes you'll see the edits on the PDF printout of your logbook pages.

Page 20 of 20 
 

             OMB 0648‐0213 
     Expiration Date:  03/31/2015 


File Typeapplication/pdf
File TitleMicrosoft Word - eLogbook Instructions for eLandings.docx
Subject50 CFR 679, 679.5(f), Alaska, Alaska fishery regulations, Alaska fisheries, electronic logbook, groundfish logbook, catcher/proc
AuthorNOAA Fisheries, NMFS Alaska Region
File Modified2013-07-30
File Created2011-03-04

© 2024 OMB.report | Privacy Policy