Form 8700-12 Notification of RCRA Subtitle C Activity

Revisions to the RCRA Definition of Solid Waste Final Rule (Revision)

2310.03 Form 8700-12

Private Sector – DSW Final Rule Requirements

OMB: 2050-0202

Document [pdf]
Download: pdf | pdf
United States
Environmental Protection
Agency

December 2011

Notification of
RCRA Subtitle C
Activity
Instructions and Form
EPA Form 8700-12
(OMB #2050-0024; Expires 12/31/2014)

Office of Resource Conservation and Recovery (ORCR)
(5303P)
Washington, DC 20460
Notification of Subtitle C Activity
Instructions and Form
Section 3010 of Subtitle C of Resource Conservation and Recovery Act (RCRA) requires any person who generates,
transports, or recycles regulated wastes or who owns or operates a facility for the treatment, storage, or disposal of
regulated wastes to notify EPA of their activities, including the location and general description of the activities and
the regulated wastes handled. Respondents must submit the information required in the Notification of Subtitle C
Activity Instructions and Form booklet by completing the RCRA Subtitle C Site Identification Form [EPA Form
8700-12]. As required by statue, EPA promulgated regulations to implement these notification requirements at 40
CFR Parts 260, 261, 262, 263, 264, 265, 266, 270, 273, and 279. EPA needs this information to determine the
universe of persons who generate, handle, and manage these regulated wastes; assign EPA Identification Numbers;
and ensure that these regulated wastes are managed in a way that protects human health and the environment as
required by RCRA. This is mandatory reporting by the respondents.
EPA enters notification information submitted by respondents into RCRAInfo, the EPA national database, and
assigns EPA Identification Numbers. EPA uses this information to identify the universe of regulated waste
generators, handlers, and managers and their specific regulated waste activities. EPA also uses the information for
tracking and for a variety of enforcement and inspection purposes. Finally, EPA uses this information to ensure that
regulated waste is managed properly, that statutory provisions are upheld, and that regulations are adhered to by
facility owners or operators.
Section 3007(b) or RCRA and 40 CFR Part 2, Subpart B, which defines EPA’s general policy on public disclosure
of information, both contain provisions for confidentiality. However, the Agency does not anticipate that businesses
will assert a claim of confidentiality covering all or part of the Notification or Subtitle C Activity. If such a claim
were asserted, EPA must and will treat the information in accordance with the regulations cited above. EPA also
will assure that this information collection complies with the Privacy Act of 1974 and OMB Circular 108.
Estimated Burden: The annual public reporting and recordkeeping burden for the Notification of Regulated Waste
Activity is estimated to average 2 hours per response for the initial notification, and 1 hour per response for any
subsequent notifications.
To comment on EPA 's need for this information, the accuracy of the provided burden estimates, and any suggested methods for
minimizing respondent burden, including the use of automated collection techniques, EPA has established a public docket for this
ICR under Docket ID Number EPA-HQ-RCRA-2011-0280, which is available for online viewing at www regulations.gov, or in
person viewing at the RCRA Docket in the EPA Docket Center (EPA/DC), EPA West, Room B102, 1301 Constitution Avenue,
NW, Washington, D.C. The EPA Docket Center Public Reading Room is open from 8:30 a m. to 4:30 p m., Monday through
Friday, excluding legal holidays. The telephone number for the Reading Room is (202) 566-1744, and the telephone number for
the RCRA Docket is (202) 566-0270. An electronic version of the public docket is available at www.regulations.gov. This site
can be used to submit or view public comments, access the index listing of the contents of the public docket, and to access those
documents in the public docket that are available electronically. When in the system, select “search,” then key in the Docket ID
Number identified above. Also, you can send comments to the Office of Information and Regulatory Affairs, Office of
Management and Budget, 725 17th Street, NW, Washington, D.C. 20503, Attention: Desk Officer for EPA. Please include the
EPA Docket ID Number EPA-HQ-RCRA-2011-0280 and OMB Control Number 2050-0024 in any correspondence.

Table of Contents

THE NOTIFICATION OF RCRA SUBTITLE C ACTIVITIES ............................................ 1 
Introduction ................................................................................................................................. 1 
What’s New ................................................................................................................................ 1 
Where To Get Help ..................................................................................................................... 2 
Initial Notifications ..................................................................................................................... 3 
Subsequent Notifications ............................................................................................................ 4
DETERMINING IF YOU MUST NOTIFY ............................................................................... 5 
How to Determine if You Must Notify EPA of Your RCRA Subtitle C Activities ................... 5 
How to Determine if You Must Notify EPA of Your Universal Waste Activities..................... 6 
How to Determine if You Must Notify EPA of Your Used Oil Management Activities ........... 7 
Who is Exempt From Used Oil Notification Requirements? ..................................................... 7 
How to Determine if You Must Notify EPA of Your Subpart K Laboratory Hazardous Waste
Activities ..................................................................................................................................... 8 
How to Determine if You Must Notify EPA of Your Hazardous Secondary Material Activities
..................................................................................................................................................... 8 
How Many Forms Should I File?................................................................................................ 8 
Can I Request That This Information Be Kept Confidential? .................................................... 9 
Where Should I Send My Completed Form? .............................................................................. 9 
Item-by-Item Instructions for Notification of RCRA Subtitle C Activity Using the RCRA
Subtitle C Site Identification Form ............................................................................................. 9
INSTRUCTIONS FOR FILLING OUT THE RCRA SUBTITLE C SITE
IDENTIFICATION (SITE ID) FORM ..................................................................................... 10 
Who Must Submit This Form ................................................................................................... 10 
Purpose Of This Form ............................................................................................................... 10 
How To Fill Out This Form ...................................................................................................... 10 
Item-By-Item Instructions ......................................................................................................... 12 
Item 1 – Reason for Submittal .............................................................................................. 12 
Item 2 – Site EPA ID Number .............................................................................................. 13 
Item 3 and 4 – Site Name and Location ................................................................................ 14 
Item 5 – Site Land Type........................................................................................................ 14 
Item 6 – North American Industry Classification System (NAICS) Code(s) ....................... 14 
Item 7 – Site Mailing Address .............................................................................................. 14 
Item 8 – Site Contact Person ................................................................................................. 15 
Item 9 – Legal Owner and Operator of the Site .................................................................... 15 
Item 10 – Type of Regulated Waste Activity ....................................................................... 17 
Item 11 – Description of Hazardous Wastes......................................................................... 24 
Item 12 – Notification of Hazardous Secondary Material (HSM) Activity.......................... 24 
Item 13 – Comments ............................................................................................................. 25 
Item 14 – Certification .......................................................................................................... 25

ADDENDUM TO THE SITE IDENTIFICATION FORM: NOTIFICATION OF
HAZARDOUS SECONDARY MATERIAL ACTIVITY ....................................................... 26 
You Must Fill Out This Section If ............................................................................................ 26 
Item 1 – Indicate Reason for Notification............................................................................. 26 
Item 2 – Description of Hazardous Secondary Material (HSM) Activity ............................ 27 
Item 3 – Facility has Financial Assurance Pursuant to 40 CFR 261 Subpart H ................... 30
OTHER REFERENCE INFORMATION AND CODE LISTS ............................................. 31 
Excluded Wastes ....................................................................................................................... 32 
Definitions................................................................................................................................. 33 
EPA Hazardous Waste Codes ................................................................................................... 42 
HSM Facility Codes .................................................................................................................. 43 
HSM Land-Based Unit Codes .................................................................................................. 44 

THE NOTIFICATION OF RCRA SUBTITLE C ACTIVITIES
Introduction
This booklet is designed to help you determine if you are subject to requirements under the Resource
Conservation and Recovery Act (RCRA) for notifying the U.S. Environmental Protection Agency (EPA)
of your regulated waste activities. Regulated wastes are hazardous wastes as defined by 40 CFR Part 261,
universal wastes as defined by 40 CFR Part 263, and used oil as defined by 40 CFR Part 279.
Furthermore, if you are managing hazardous secondary material under 40 CFR 261.2(a)(2)(ii), 40 CFR
261.4(a)(23), (24), or (25) you also must notify under 40 CFR 260.42 using the RCRA Subtitle C Site
Identification Form and Addendum to the Site Identification Form. The instructions contained in this
booklet will assist you in obtaining an EPA Identification Number by completing and submitting the
RCRA Subtitle C Site Identification Form (Site ID Form) [EPA Form 8700-12] for Initial Notifications or
in revising your Site ID Form if you are required to submit a Subsequent Notification. RCRA is a Federal
law. If you are regulated but do not comply with the RCRA notification requirements, you may be
subject to civil penalties.

NOTE



Although this booklet contains information and instructions for completing a
Notification of RCRA Subtitle C Activity, it should not be considered a substitute
for the regulations in Title 40 of the Code of Federal Regulations (40 CFR). Rather,
this booklet serves as a supplement to the regulations and provides additional
information not contained in 40 CFR. As a handler of regulated wastes, you are
responsible for learning and complying with all requirements that apply to you and
your regulated waste activities.



In addition, remember that this booklet and the regulations in 40 CFR address only
the Federal hazardous waste program. Many States may have notification
requirements that differ from the Federal requirements; those States may use the
Site ID Form or they may use a similar State form that requires information not
requested in the EPA form. Again, it is your responsibility to make sure that you
have completed and submitted all forms required under the Federal or your State
program.

What’s New
Below are a list of changes to the Notification of RCRA Subtitle C Activity Instructions and Forms.
1. Revised wording of Box 10.D (Academic Labs) and the Addendum to the Site ID form
(Hazardous Secondary Material) Wording changes implemented to both the Site ID form and
instructions to help minimize confusion for reporting under these rules.
2. Clarified “Short-term Generator” Added examples, further instruction, and a definition for
short-term generator.

1

The Notification of RCRA Subtitle C Activities
(continued)

3. Revised note for Treater, Storer, or Disposer of Hazardous Waste The note under Box 10.A.6
in the Site ID form now reads “Note: A hazardous waste Part B permit is required for these
activities.”

Where To Get Help
We realize that the regulations are complex. Although we are not providing reprints of the 40 CFR
regulations in this booklet, copies of the Federal regulations are available from EPA (see below). We
have listed the addresses and phone numbers of the contacts in each State who can answer your questions
and help you understand the Federal and State requirements that apply to you. This contact list is located
at: http://www.epa.gov/osw/inforesources/data/form8700/contact.pdf.
In addition to these contacts, there are several other sources available to help with your questions and
provide information on EPA regulations:
RCRA Frequently Asked Questions. This allows users to find answers to commonly asked
questions that cover a wide range of RCRA issues and topics. Find at:
http://waste.supportportal.com/ics/support/default.asp?deptID=23023.
RCRA Online. The RCRA Online database is designed to enable users to locate documents,
including publications and other outreach materials that cover a wide range of RCRA issues and
topics. Find at: http://www.epa.gov/rcraonline.
RCRA Regulations. The Federal regulations can be found at: http://www.gpo.gov/fdsys/.
Compliance Assistance Centers. The Environmental Protection Agency (EPA) has sponsored
partnerships with industry, academic institutions, environmental groups, and other agencies to
launch sector-specific Compliance Assistance Centers (Centers). Each Center addresses real
world issues in understandable language for you to understand Federal environmental
requirements and how to save money through pollution prevention techniques. Visit the
Compliance Assistance Centers at: http://www.assistancecenters.net.
EPA National Compliance Assistance Clearinghouse. The Compliance Assistance
Clearinghouse is a comprehensive source of compliance assistance information and resources.
Use links to Federal, State, local, and other compliance assistance providers to find the tools you
need. Visit the Compliance Assistance Clearinghouse at:
http://www.epa.gov/compliance/assistance/index.html.
EPA Small Business Ombudsman Office – 1-800-368-5888.
Your Trade Association

2

The Notification of RCRA Subtitle C Activities
(continued)

Initial Notifications
If you do not currently have an EPA Identification Number and you handle regulated waste or hazardous
secondary material, you must submit an initial notification. Please refer to information contained in pages
4-7 of this booklet to help you determine whether you handle a regulated waste, whether any exemptions
or exclusions apply to you, and how you should file the Notification of RCRA Subtitle C Activity.
Circumstances under which you should submit an initial notification include:
1. If you generate, transport, treat, store, or dispose of hazardous waste. Refer to pages 4-5 for
further information and a description of exclusions or exemptions; or
2. If you recycle hazardous wastes. (Recyclable materials are defined as hazardous wastes that
are recycled). The recycling process itself is exempt from regulation, but you must notify
EPA and obtain an EPA Identification Number prior to recycling recyclable materials. Refer
to pages 4-5 for further information and a description of exemptions; or
3. If you are a large quantity handler of universal waste. Refer to page 5 for further information
and a description of exemptions. (Notification is required for people who have not previously
notified EPA of their hazardous waste activities or who have not already sent a notification to
EPA as required by 40 CFR Part 273.32); or
4. If you transport, process, or re-refine used oil; burn off-specification used oil for energy
recovery; or market used oil. Refer to page 6 for further information and for a description of
exemptions. (Notification is required for people who have not previously notified EPA of
their hazardous waste activities or have not notified under 40 CFR Part 279 or under 40 CFR
Part 266, Subpart E, which was replaced by 40 CFR Part 279.)

5. If you are an eligible academic entity opting into 40 CFR Part 262 Subpart K for managing
laboratory hazardous wastes AND you have never before submitted site identification
information, you must submit this form to notify the appropriate State or EPA Regional
Office of your activities. Note: You must check with your State to determine if you are
eligible to manage laboratory hazardous waste pursuant to 40 CFR Part 262 Subpart K in
order for you to notify.
6. If you will begin managing hazardous secondary material under 40 CFR 261.2(a)(2)(ii), 40
CFR 261.4(a)(23), (24), or (25) you must submit this form, pursuant to 40 CFR 260.42, to
notify the appropriate State or EPA Regional Office of your activities. Note: You must
check with your State to determine if you are eligible to manage hazardous secondary
material under these exclusions in order for you to notify.
7. If your business moves to another location and you are still conducting activities regulated
under Subtitle C.

3

The Notification of RCRA Subtitle C Activities
(continued)

Subsequent Notifications
Even if you have submitted an initial notification and have received an EPA Identification Number, you
may be required to submit a subsequent notification. Please refer to pages 4-8 of this booklet for
information on when and how to complete a subsequent notification. In general, you should submit a
subsequent notification under the following circumstances:
1. If the contact for your site changes.
2. If the ownership of your site changes.
3. If an additional owner has been added or replaced since you submitted your last notification.
4. If the type of RCRA Subtitle C activity you conduct changes.
5. If you have previously submitted site identification information and are an eligible academic
entity opting into or withdrawing from 40 CFR Part 262 Subpart K for managing laboratory
hazardous wastes, you must use this form. Note: You must check with your State to
determine if you are eligible to manage laboratory hazardous waste pursuant to 40 CFR Part
262 Subpart K in order for you to notify.
6. If you are managing or will stop managing hazardous secondary material under 40 CFR
261.2(a)(2)(ii), 40 CFR 261.4(a)(23), (24), or (25), you are required to re-notify by March 1
of each even-numbered year pursuant to CFR 260.42.

4

DETERMINING IF YOU MUST NOTIFY
How to Determine if You Must Notify EPA of Your RCRA Subtitle C Activities
All persons who generate, transport, recycle, treat, store, or dispose of hazardous waste are required to
notify EPA (or their State agency if the State is authorized to operate its own hazardous waste program)
of their hazardous waste activities. Furthermore, if you are managing hazardous secondary material under
40 CFR 261.2(a)(2)(ii), 40 CFR 261.4(a)(23), (24), or (25) you also must notify using the RCRA Subtitle
C Site Identification Form and Addendum to the Site Identification Form. These persons must obtain an
EPA Identification Number unless their solid waste has been excluded from regulation or their hazardous
waste has been exempted as outlined below. These respective notification requirements are found in 40
CFR Parts 260, 261, 262, 263, 264, 265, and 266.
In addition to the discussion below, you will need to refer to 40 CFR Part 261 to help you determine if the
waste you handle is both a solid waste and a hazardous waste that is regulated under RCRA. If you need
help making this determination after reading these instructions, contact the agency listed for your State.
The list of contact names, addresses, telephone numbers, and e-mail address is located at:
http://www.epa.gov/osw/inforesources/data/form8700/contact.pdf.

NOTE

Under the Hazardous Waste Import Regulations, 40 CFR Part 262.60, foreign generators
should not apply for an EPA Identification Number. These regulations state that when
filling out a U.S. manifest, you must include the name and address of the foreign generator,
and the name, address, and EPA Identification Number of the importer. Please contact the
U.S. firms involved with your shipments and determine which firm will serve as the U.S.
Importer.

To determine if you handle a solid waste that is also a hazardous waste and regulated under RCRA, ask
yourself the following questions:
A. Do I Handle a Solid Waste?
40 CFR 261.2 defines “solid waste” as any discarded material that is not excluded under Part
261.4(a) or that is not excluded by variance granted under Part 260.30 and 260.31. A
discarded material is any material which is:


Abandoned, as explained in Part 261.2(b); or



Recycled, as explained in Part 261.2(c); or



Considered inherently waste-like as explained in Part 261.2(d); or



A military munition identified as a solid waste in Part 266.202.

B. Has My Solid Waste Been Excluded from the Regulations under Part 261.4?
The list of general exclusions can be found in 40 CFR 261.4. If the solid waste that you
handle has been excluded, either by rule or special variance, then you do not need to notify
EPA for that solid waste unless otherwise stated in the regulations. If your solid waste was

5

Determining if You Must Notify
(continued)
not excluded from regulation, you need to determine if it is a hazardous waste that EPA
regulates. EPA regulates a solid waste as hazardous waste in two ways:


By specifically listing the solid waste as a hazardous waste and assigning it a unique
EPA Hazardous Waste Code Number; or



By regulating it because it possesses any of four hazardous waste characteristics and
assigning it a generic EPA Hazardous Waste Code Number.

C. Is My Solid Waste Specifically Listed as a Hazardous Waste?
Parts 261.30 through 261.33 identify certain solid wastes that EPA has specifically listed as
hazardous. Persons who handle listed hazardous waste are subject to regulation and must
notify EPA of their hazardous waste activities unless they are exempted as discussed below.
Refer to these regulations to see if your solid waste is included as a “listed hazardous waste.”
If you are handling a newly regulated hazardous waste and have already notified EPA prior to
that hazardous waste being regulated and already have an EPA Identification Number,
you do not need to submit a subsequent notification for that newly regulated hazardous waste.
D. Does My Solid Waste Possess a Hazardous Characteristic?
Even if your solid waste is not specifically listed as a hazardous waste, it may still be
hazardous because it exhibits certain hazardous characteristics. These characteristics are:





Ignitability
Corrosivity
Reactivity
Toxicity

Parts 261.20 through 261.24 explain each of the characteristics and outline the testing
procedures you should use to determine if your solid waste meets these characteristics.
Persons who handle characteristic hazardous waste that is regulated must notify EPA of their
activities unless they are exempted, as discussed below. If you are handling a newly
regulated hazardous waste and have already notified EPA prior to that hazardous waste being
regulated and already have an EPA Identification Number, you do not need to submit a
subsequent notification for that newly regulated hazardous waste.
E. Has My Hazardous Waste Been Exempted from the Regulations under Parts 261.5 and
261.6(a)(3)?
Parts 261.5 and 261.6(a)(3) list certain hazardous wastes that are not subject to RCRA
regulation. If the hazardous waste that you handle has been exempted, then you do not need
to notify EPA for that hazardous waste.

How to Determine if You Must Notify EPA of Your Universal Waste Activities
Under 40 CFR Part 273, Subpart C, Large Quantity Handlers of Universal Waste (LQHUW) who
accumulate a total of 5,000 kilograms or more of universal wastes at any time are required to notify EPA
(or their State agency if the State is authorized to operate its own universal waste program) of their
universal waste activities and obtain an EPA Identification Number, unless they have previously notified
EPA of their hazardous waste activities. Large Quantity Handlers of Universal Waste must notify EPA of
their universal waste activities and obtain an EPA Identification Number before meeting or exceeding the

6

Determining if You Must Notify
(continued)
5,000 kilogram storage limit. Small Quantity Handlers of Universal Waste are exempt from these
notification requirements.

NOTE

Please refer to the regulations in 40 CFR Part 273 to ensure that you are aware of all the
requirements that apply to your universal waste handling activities.

How to Determine if You Must Notify EPA of Your Used Oil Management Activities
Under 40 CFR Part 279, Subparts E, F, G, and H, respectively, persons who transport used oil; process or
re-refine used oil; burn off-specification used oil for energy recovery; or market used oil fuel, are required
to notify EPA (or their State agency if the State is authorized to operate its own used oil program) and
obtain an EPA Identification Number, unless they are exempt as outlined below. Off-specification used
oil may be burned for energy recovery in an industrial furnace, boiler, or hazardous waste incinerator
subject to regulation under Subpart O of 40 CFR Part 264 or 265.
Used oil transporters; used oil processors/re-refiners; off-specification used oil burners; and used oil fuel
marketers who have not previously notified EPA of their hazardous waste activities or notified under 40
CFR Part 266, Subpart E (replaced by Part 279) must notify EPA to identify their used oil management
activities.

NOTE

Please refer to the regulations in 40 CFR Part 279 to ensure that you are aware of all the
requirements that apply to your used oil management activities.

Who is Exempt from Used Oil Notification Requirements?
A. Persons who burn on-specification used oil fuel. Used oil that is to be burned for energy
recovery and that meets the specification provided under Part 279.11 is exempt from the
regulations. However, the person who first claims that the used oil meets the
specification is subject to notification as a used oil fuel marketer and certain other
requirements (see Part 279, Subpart H). The burner of fuel that meets the specification in
Part 279.11 is not required to notify.
B. Used oil generators are not required to notify EPA.
C. Used oil generators operating used oil-fired space heaters. Persons who burn only used
oil that they generate (or used oil received from household do-it-yourself used oil changers)
in used oil-fired space heaters are exempt from the notification requirement provided that the
device is vented to the outdoors and the device is not designed to have a capacity greater than
0.5 million BTU/hour.

7

Determining if You Must Notify
(continued)

How to Determine if You Must Notify EPA of Your Subpart K Laboratory Hazardous
Waste Activities
Subpart K is an alternative set of generator requirements for managing laboratory hazardous waste at
eligible academic entities. Generators that are eligible academic entities with laboratories may elect to
opt into 40 CFR Part 262 Subpart K and manage their laboratory hazardous waste under Subpart K in lieu
of 40 CFR 262.34(c)(or 40 CFR 261.5 for CESQGs). In order for eligible academic entities (see
definition) to opt into Subpart K or subsequently withdraw from Subpart K, they must use the Site ID
Form to notify the appropriate State or EPA Regional Office. Refer to 40 CFR 262.203 and 262.204.
Note: You must check with your State to determine if you are eligible to manage laboratory hazardous
waste pursuant to 40 CFR Part 262 Subpart K and for any state-specific requirements.

How to Determine if You Must Notify EPA of Your Hazardous Secondary Material
Activities
40 CFR 261.2(a)(2)(ii), 40 CFR 261.4(a)(23), (24), and (25) exclude certain hazardous secondary material
being reclaimed from the RCRA Subtitle C definition of solid waste, provided certain requirements and
conditions are met. Hazardous secondary material is secondary material (e.g., spent material, by-product,
or sludge) that, when discarded, would be identified as hazardous waste under 40 CFR 261.
Facilities that will begin managing, are still managing, or will stop managing hazardous secondary
material under these regulations must notify under 40 CFR 260.42 using the Site ID Form and the
Addendum to the Site ID Form. Note: You must check with your State to determine if you are eligible to
manage hazardous secondary material under 40 CFR 261.2(a)(2)(ii), 40 CFR 261.4(a)(23), (24), or (25).

How Many Forms Should I File?
A person who is subject to the hazardous waste, universal waste, or used oil management regulations
under RCRA should submit one notification (Site ID Form) per RCRA site. If you manage academic
laboratory waste under Subpart K or hazardous secondary material under 40 CFR 261.2(a)(2)(ii), 40 CFR
261.4(a)(23), (24), or (25) you should submit one notification per site using the Site ID Form and, if
appropriate, the Addendum to the Site ID Form. If you conduct any regulated waste activity or hazardous
secondary material at more than one RCRA site, you must submit a separate notification for each RCRA
site using the Site ID Form.
If you only transport regulated wastes and do not generate, treat, store, or dispose of hazardous wastes; do
not qualify as a large quantity handler of universal wastes; or do not process/re-refine used oil, burn offspecification used oil fuel, or market used oil fuel, you may submit one notification that covers all
activities your company conducts. This notification should be sent to the appropriate State or Regional
Office (http://www.epa.gov/osw/inforesources/data/form8700/contact.pdf) that serves the State where
your company has its headquarters or principal place of business. However, if you are a transporter who
also engages in one or more of the regulated waste activities listed above, you must submit a separate
notification for each RCRA site using the Site ID Form.

8

Determining if You Must Notify
(continued)

Can I Request That This Information Be Kept Confidential?
All information you submit in an initial or subsequent notification can be released to the public, according
to the Freedom of Information Act, unless it is determined to be confidential by EPA pursuant to 40 CFR
Part 2. Since notification information is very general, EPA believes it is unlikely that any information in
your notification could quality to be protected from release. However, you may make a claim of
confidentiality by printing the word “CONFIDENTIAL” on all pages of the RCRA Subtitle C Site
Identification Form and on any attachments. EPA will take action on the confidentiality claims in
accordance with 40 CFR Part 2.

Where Should I Send My Completed Form?
We have provided an up-to-date list of the address for your State or EPA Regional Office where you
should send your completed RCRA Subtitle C Site Identification Form. The contact list can be found at:
http://www.epa.gov/osw/inforesources/data/form8700/contact.pdf. This list contains contact names,
addresses, phone numbers and e-mail addresses that you can use to obtain additional information.
Many States use the form included at the end of this booklet; some also require additional information.
The other States require that you complete and submit a State-specific form. Information about which
form to use is included with the contact list located at the web page noted above. Even if you use the
included form, you should check with your State to determine if you need to submit additional
information. Also, contact your State if you have any questions about your submission.
After your completed Site ID Form for a notification is received and processed, you will be sent a written
acknowledgement that will include your EPA Identification Number. You must use this number on all
communications with EPA regarding your regulated waste and hazardous secondary material
activities for this site.

Item-by-Item Instructions for Notification of RCRA Subtitle C Activity Using the RCRA
Subtitle C Site Identification Form
Please be sure to review the instructions carefully and complete all items on the form. After you have
submitted the Site ID Form once, your State may allow you to attach a copy of your most recently
submitted form. If so, circle item numbers for which any information has changed. Then enter the new
information (and circle the item numbers) on the Site ID Form included in this booklet and provide the
required signatures (no photocopied signatures) in Item 14 – Certification.

9

INSTRUCTIONS FOR FILLING OUT THE RCRA
SUBTITLE C SITE IDENTIFICATION (SITE ID) FORM
Who Must Submit This Form
All sites required to submit any of the following must submit the RCRA Subtitle C Site Identification
(Site ID) Form:








Initial Notification of Regulated Waste Activity
Subsequent Notification of Regulated Waste Activity
First RCRA Hazardous Waste Part A Permit Application
Revised RCRA Hazardous Waste Part A Permit Application
Hazardous Waste Report
Notification for eligible academic entities opting into or withdrawing from managing laboratory
hazardous wastes pursuant to 40 CFR Part 262 Subpart K (if in an eligible State)
Notification for facilities managing hazardous secondary material pursuant to 40 CFR 260.42 (if
in an eligible State)

Some States have requirements in addition to, or that are different from the Federal requirements. To
obtain the appropriate forms or ask questions, refer to a list of contacts at:
http://www.epa.gov/epawaste/inforesources/data/form8700/contact.pdf. The list will tell you whether the
Federal form or a State form is used, who to contact, and where to mail the completed form.

Purpose of This Form
The Site ID Form provides site-specific information about your facility and is used to obtain an EPA
Identification Number. The Site ID form also provides updated information for items that have changed at
your site and verifies the information for those items that remain unchanged.

How to Fill Out This Form
Complete the following Site ID Form items, as applicable to your facility:












Item 1 –
Item 2 –
Item 3 –
Item 4 –
Item 5 –
Item 6 –
Item 7 –
Item 8 –
Item 9 –

your reason for submitting the form
your site’s EPA Identification Number
the name of your site
the physical location of your site
the land type of your site
the North American Industry Classification System (NAICS) code(s) for your site
the mailing address for your site
name, title, address, phone number, fax, and e-mail of a contact person at your site
name, address, and phone number of the legal owner(s) and name of the operator(s) of
your site
Item 10 – your site’s regulated waste activities (enter all that apply)
Item 11 – the description of hazardous waste

10

Site ID Form
(continued)





Item 12 – your site’s hazardous secondary material activity, if you manage any
Item 13 – additional comments on Items 1 – 12
Item 14 – certification that the information you provided throughout the form is truthful, accurate
and complete
Addendum to the Site Identification Form – notification of hazardous secondary material activity

Type or print, in black ink, all items except the Signature box in Item 14. In Item 14, provide the required
ink signatures. Signatures must be original. Stamped or photocopied signatures are not acceptable. Enter
your site’s EPA Identification Number in the top left-hand corner on all pages of the form; for an Initial
Notification for this site, leave the EPA Identification Number blank. Use Item 13 – Comments to clarify
or provide additional information for any entry. When entering information in the comments section,
enter the item number and box letter to which the comment refers. If you must use additional sheets for
comments, enter your site’s EPA Identification Number in the top left-hand corner of each sheet.

11

Site ID Form
(continued)

Item-By-Item Instructions
Item 1 – Reason for Submittal
Reason for Submittal: Place an “X” in the appropriate box(es) to indicate whether this form is your
Initial Notification (i.e., this is your first time submitting site identification information / to obtain an EPA
Identification Number for this location); a Subsequent Notification (to update your site identification
information); a component of a First or a Revised Hazardous Waste Part A Permit Application; or a
component of the Hazardous Waste Report.




To provide an Initial Notification (first time submitting site identification information / to
obtain an EPA Identification Number for this location).
o

If your waste activity is regulated under Subtitle C of the Resource Conservation and
Recovery Act (RCRA) and the rules promulgated pursuant to the Act (specifically 40
CFR Parts 260-299), you must submit this form to notify the appropriate State or EPA
Regional Office of your regulated waste activities and obtain an EPA Identification
Number.

o

If you are an eligible academic entity opting into 40 CFR 262 Subpart K for managing
laboratory hazardous wastes AND you have never before submitted site identification
information, you must submit this form to notify the appropriate State or EPA Regional
Office of your activities. Note: You must check with your State to determine if you are
eligible to manage laboratory hazardous waste pursuant to 40 CFR Part 262 Subpart K in
order for you to notify.

o

If you will begin managing hazardous secondary material under 40 CFR 261.2(a)(2)(ii),
40 CFR 261.4(a)(23), (24), or (25) AND you have never before submitted site
identification information, you must submit this form, pursuant to 40 CFR 260.42, to
notify the appropriate State or EPA Regional Office of your activities. Note: You must
check with your State to determine if you are eligible to manage hazardous secondary
material under these exclusions in order for you to notify.

To provide a Subsequent Notification (to update site identification information for this
location).
o

You must use this form to submit a subsequent notification if your site already has an
EPA Identification Number and you wish to change information (e.g., generator status,
new site contact person, new owner, new mailing address, new regulated waste activity,
etc.).

o

If you have previously submitted site identification information and are an eligible
academic entity opting into or withdrawing from 40 CFR Part 262 Subpart K for
managing laboratory hazardous wastes, you must use this form. Note: You must check
with your State to determine if you are eligible to manage laboratory hazardous waste
pursuant to 40 CFR Part 262 Subpart K in order for you to notify.

o

If you have previously submitted site identification information and are notifying (or renotifying) that you will begin managing, are managing, or have stopped managing
hazardous secondary material under 40 CFR 261.2(a)(2)(ii), 40 CFR 261.4(a)(23), (24),

12

Site ID Form
(continued)
or (25), you must submit this form, pursuant to 40 CFR 260.42, to notify the appropriate
State or Regional Office of your activities. Note: You must check with your State to
determine if you are eligible to manage hazardous secondary material under these
exclusions in order for you to notify.


As a component of a First RCRA Hazardous Waste Part A Permit Application. If your site
is planning to treat, store, or dispose of hazardous waste on-site in a unit that is not exempt from
obtaining a hazardous waste permit, you must submit this form as part of the Part A Permit
Application. Also, if the activity at this site (treatment, storage, or disposal) became newly
regulated under RCRA Subtitle C and the rules promulgated pursuant to the Act (specifically 40
CFR Parts 260-299), you must submit this form as part of the Part A Permit Application.



As a component of a Revised RCRA Hazardous Waste Part A Permit Application. If you
must submit a revised Part A Permit Application to reflect changes that have occurred at your
site, you must submit this form as part of your revised Part A Permit Application. Examples of
site changes requiring a revised Part A Permit Application include managing new wastes not
identified in the first submission of the form or changes to existing waste treatment processes.
When submitting a revised Part A Permit Application, please include the Amendment number in
the appropriate space.



As a component of the Hazardous Waste Report. (If marked, see sub-bullet below). If you
are required to submit a Hazardous Waste Report indicating the amount of hazardous waste you
generate, treat, recycle, dispose, ship off-site, or receive from off-site, you must fill out this form.
A Site ID Form submitted with a Hazardous Waste Report is equivalent to a Subsequent
Notification.
o

Site was a TSD facility and/or generator of ≥ 1,000 kg of hazardous waste, > 1 kg of
acute hazardous waste, or > 100 kg of acute hazardous waste spill cleanup in one or
more months of the report year (or State equivalent LQG regulations). The purpose
of this check box is to distinguish between sites that meet the criteria and are required to
file a report versus those who file voluntarily or by State-only requirement but were not a
TSD facility or a Large Quantity Generator (LQG) during the report year. Sites required
to file the report should place an “X” in this box while non-LQG/TSD sites should not.
For more information about who must file a report, refer to Who Must File the Hazardous
Waste Report.

Item 2 – Site EPA ID Number
Provide your EPA Identification Number in Item 2 for this site. The first two characters of the EPA ID
Number must be a valid state postal code. Be sure to include your EPA Identification Number at the top
of all pages of the form (as well as on any attachments to the Site ID Form).

NOTE

If this is your Initial Notification for this site, leave the EPA Identification Number blank
and proceed to Item 3.

13

Site ID Form
(continued)
Item 3 and 4 – Site Name and Location
Provide the legal name of your site and a complete location address. Please note that the address you give
for Item 4, Site Location, must be a physical address, not a post office box or route number. Only foreign
hazardous waste transporters, with their headquarters located outside the U.S., may provide a Site
Location Country outside of the U.S.

NOTE

A new EPA Identification Number is required if you change the location of your site.

Item 5 – Site Land Type
Place an “X” in the box that best describes the land type of your site. Select only one type: Private,
County, District, Federal, Tribal (see below), Municipal, State, or Other. If your site’s Land Type could
be described as Municipal and another Land Type, such as County, District, or Tribal, do not place an
“X” in Municipal. Instead, choose the other appropriate Land Type. (For example, if your site’s Land
Type is both Municipal and County, you would place an “X” in the box for County.) You may explain
this in Item 13 – Comments.
Tribal – A member of one of the tribes/entities on the list of federally recognized American
Indian tribes and Alaskan Native entities located at:
http://www.epa.gov/tribal/whereyoulive/tribes-a-z.htm.
Item 6 – North American Industry Classification System (NAICS) Code(s)
Box A must be completed. Completing Boxes B-D is recommended, if applicable.
Box A

Provide the North American Industry Classification System (NAICS) code that
best describes your site’s primary business production process for your products
or services. Referencing the latest NAICS codes, use the 6-digit code (most
specific description) if available for your business; if not, use the 5-digit code; do
not enter any four (4) or less digit codes.

Boxes B – D

List other NAICS codes that describe the other business production processes for
your site. Referencing the latest NAICS codes, use the 6-digit code (most specific
description) if available for your business; if not, use the 5-digit code; do not
enter any four (4) or less digit codes.

Check with your accounting or business staff to determine your NAICS code(s); the NAICS code is used
in tax reporting and other business reports. You can obtain additional information about NAICS codes at
http://www.census.gov/eos/www/naics.
Item 7 – Site Mailing Address
Please enter the Site Mailing Address. If the Mailing Address and the Location of Site (Item 4) are the
same, you can enter “Same as Item 4” in the box for Item 7.

14

Site ID Form
(continued)
Item 8 – Site Contact Person
Enter the name, title, business address, telephone number, extension, fax number, and e-mail address of
the individual who should be contacted regarding the information submitted in the Site ID Form. A
Subsequent Notification is recommended when the Site Contact Person changes. Do not enter other
contact persons here; if there are other persons, who may be contacted about this submission, list them
and their other contact information in Item 13. If the person completing the Hazardous Waste Report is
not the primary site RCRA hazardous waste contact, enter the primary site RCRA hazardous waste
contact here and add the contact information for the person completing the Hazardous Waste Report in
Item 13 – Comments.
Note: This is NOT the Facility Permit Contact information. The Facility Permit Contact information
should be entered on the RCRA Hazardous Waste Part A Permit Application.
Item 9 – Legal Owner and Operator of the Site
This section should be used to indicate all owners and operators of this site.
A. Name of Site’s Legal Owner: Provide the name of your site’s legal owner(s). This includes
owner(s) of the building(s) and land. Please review these definitions:
Owner – The person who owns a RCRA site or part of a RCRA site. Note: This includes
the owner(s) of the building(s) and/or land. This may be an individual, company, or
business name. See Person.
Person – An individual, trust, firm, joint stock company, Federal Agency, corporation,
(including a government corporation), partnership, association, State, municipality,
commission, political subdivision of a State, or any interstate body.
Date Became an Owner: Indicate the date on which the above entity became the owner of
your site. Enter dates as in this example: For April 22, 2011, enter 04/22/2011. This is a
required field and a date must be reported.
Owner Type: Place an “X” in the box that best describes the owner type for your site.
Select only one type: Private, County, District, Federal, Tribal (see below), Municipal, State,
or Other. If your site’s Owner Type could be described as Municipal and another Owner
Type, such as County, District, or Tribal, do not place an “X” in Municipal. Instead, choose
the other appropriate Owner Type. (For example, if your site’s Owner Type is both Municipal
and County, you would place an “X” in the box for County.). You may explain this in Item
13 – Comments.
Tribal – A member of one of the tribes/entities on the list of federally recognized
American Indian tribes and Alaskan Native entities located at:
http://www.epa.gov/tribal/whereyoulive/tribes-a-z.htm.
Legal Owner Address: Enter the address of the legal owner. If the address and the Location
of Site (Item 4) are the same, you can enter “Same as Item 4” in the box for Item 9.
Use the Comments section in Item 13 to list any additional owners, their names, the dates
they became owners, owner type, mailing address, and which owner(s), if any, are no longer

15

Site ID Form
(continued)
owners since your last submission of this form. If necessary, attach a separate sheet of paper.
Remember to enter your site’s EPA Identification Number in the top left-hand corner of each
sheet.
B. Name of Site’s Operator. Provide the name of your site’s operator. Please review these
definitions.
Operator – The person responsible for the overall operation of a RCRA site. Note: This
is the legal entity which controls the RCRA site operation rather than the plant or site
manager. This is usually a company or business name, but may be an individual. See
Person.
Person – An individual, trust, firm, joint stock company, Federal Agency, corporation,
(including a government corporation), partnership, association, State, municipality,
commission, political subdivision of a State, or any interstate body.
Date Became an Operator: Indicate the date on which the above entity became the operator
of your site. Enter dates as in this example: For April 22, 2011, enter 04/22/2011. This is a
required field and a date must be reported.
Operator Type: Place an “X” in the box that best describes the operator type for your site.
Select only one type: Private, County, District, Federal, Tribal (see below), Municipal, State,
or Other. If your site’s Operator Type could be described as Municipal and another Operator
Type, such as County, District, or Tribal, do not place an “X” in Municipal. Instead, choose
the other appropriate Operator Type. (For example, if your site’s Operator Type is both
Municipal and County, you would place an “X” in the box for County.) You may explain this
in Item 13 – Comments.
Tribal – A member of one of the tribes/entities on the list of federally recognized
American Indian tribes and Alaskan Native entities located at:
http://www.epa.gov/tribal/whereyoulive/tribes-a-z.htm.
Use the Comments section in Item 13 to list any additional operators, their names, the dates
they became operators, operator type, mailing address, and which operator(s), if any, are no
longer operators since your last submission of this form. If necessary, attach a separate sheet
of paper. Remember to enter your site’s EPA Identification Number in the top left-hand
corner of each sheet.

NOTE

A subsequent notification is recommended when the owner or operator of a site changes.
Because an EPA Identification Number is site-specific, the new owner will keep the
existing EPA Identification Number for that location. If your business moves to another
location, the owner or operator must notify the State or EPA Regional Office of this
change. Since your business has changed locations, a new EPA Identification Number will
be assigned.

16

Site ID Form
(continued)
Item 10 – Type of Regulated Waste Activity
Mark box “Yes” or box “No” as appropriate for all current activities (as of the date submitting the
form) at this site; complete any additional boxes as instructed. Current activities mean activities that are
in effect when the form is submitted or those that the site plans to begin after EPA Identification Number
assignment. The information you provide in Item 10 will be considered current as of the date you certify
the form. If the site is no longer a generator as of the date you certify the form, you should mark the “No”
(not a generator) box for Generator of Hazardous Waste.

NOTE

You must report your current regulated waste activities as of the date of submitting the Site
ID Form. For the Hazardous Waste Report, your current status may be different than your
status during the reporting year.

A. Hazardous Waste Activities (Complete all parts 1 through 10):

NOTE

Listed below are the Federal generator status definitions. If, however, the
State where your site is located has definitions different from the Federal
definitions, you must use the State definitions.

1. Generator of Hazardous Waste (at your site): If you generate a hazardous waste
that is listed in 40 CFR 261.31 through 261.33 or identified by one or more
hazardous waste characteristic(s) contained in 40 CFR 261.21 through 261.24, place
an “X” in the appropriate box for the quantity of hazardous waste that is generated
per calendar month. The regulations for hazardous waste generators are found in 40
CFR Part 262. (http://ecfr.gpoaccess.gov/cgi/t/text/textidx?c=ecfr&tpl=%2Findex.tpl.) Consult these regulations and your State for details
about how the regulations apply to your situation. Below is a brief description of the
three types of hazardous waste generators.
If “Yes”, place an “X” in only one of the following – a, b, or c.
a. LQG: Large Quantity Generator
This site is a Large Quantity Generator if the site meets any of the following
criteria:
i) Generates, in any calendar month, 1,000 kg (2,200 lbs.) or more of nonacute RCRA hazardous waste; or
ii) Generates, in any calendar month, or accumulates at any time, more than
1 kg (2.2 lbs) of RCRA acute hazardous waste; or
iii) Generates, in any calendar month, or accumulates at any time, more than
100 kg (220 lbs.) of spill cleanup material contaminated with RCRA
acute hazardous waste.

17

Site ID Form
(continued)

If, in addition to being an LQG, you recycle hazardous
wastes at your site, mark both this box and Item 10.A.4.

NOTE

Hazardous secondary material managed under 40 CFR
261.2(a)(2)(ii), 40 CFR 261.4(a)(23), (24), or (25) DOES
NOT count towards your generator status. However, you
must check with your State to determine if you are eligible to
manage hazardous secondary material under these
exclusions.

b. SQG: Small Quantity Generator
This site is a Small Quantity Generator if the site meets all of the following
criteria:
i) Generates, in any calendar month, 100 kg (220 lbs.) but less than 1,000
kg (2,200 lbs.) of RCRA hazardous waste; and
ii) Does not generate, in any calendar month, or accumulate at any time,
more than 1 kg (2.2 lbs.) of acute hazardous waste; and
iii) Does not generate more than 100 kg (220 lbs.) of material from the
cleanup of a spill of acute hazardous waste.
OR, the site is Small Quantity Generator if the site:
i) Meets i) and iii) of the Conditionally Exempt Small Quantity Generator
criteria (see below), but
ii) Is storing more than 1,000 kg (2,200 lbs.) of RCRA hazardous waste onsite. If the site accumulates, at any time, more than 1,000 kg (2,200 lbs.)
of RCRA hazardous waste, the site must apply for an EPA ID Number
using this form.
c. CESQG: Conditionally Exempt Small Quantity Generator
This site is a CESQG if the site does all of the following:
i) Generates no more than 100 kg (220 lbs.) of RCRA hazardous waste in
any calendar month; and
ii) Does not accumulate, at any time, more than 1,000 kg (2,200 lbs) of
RCRA hazardous waste; and
iii) Does not generate, in any calendar month, or accumulate at any time,
more than 1 kg (2.2 lbs.) of acute hazardous waste and no more than 100
kg (220 lbs.) of material from the cleanup of a spill of acute hazardous
waste.

NOTE

If you generate acute hazardous wastes listed in 40 CFR 261.31,
261.32, or 261.33(e), please refer to 40 CFR 261.5(e) to determine the
circumstances under which you must notify the EPA.

If you marked “Yes” above, indicate your other generator activities. Mark “Yes” or
“No” for the other hazardous waste activities listed below that may occur at this site.
Complete all parts 2-10.

18

Site ID Form
(continued)

2. Short-Term Generators
Mark “Yes” if the site is currently generating hazardous waste only as the result of a
one-time, non-recurring, temporary event that is not related to normal production
processes. In other words, short-term generators produce hazardous waste from a
particular activity for a limited time and then cease conducting that activity. Shortterm generators would not be considered episodic generators because episodic
generators have the potential to generate on a regular basis (for example, a facility
that fluctuates from SQG to LQG in one month is not a short-term generator).
Examples of short-term generators include: 1) one-time highway bridge waste
generation; 2) underground storage tank removals; 3) generation of off-spec or outof-date chemicals at a site that normally doesn’t generate hazardous waste; 4)
remediation or spill clean-up at sites with no previous RCRA ID; and 5) site or
production process decommissions by a new operator. If you mark “Yes”, you must
provide an explanation of your short-term generation event in Item 13 - Comments.
3. United States Importer of Hazardous Waste
Mark “Yes” if you import hazardous waste from a foreign country into the United
States. Refer to 40 CFR 262.60 for additional information.
4. Mixed Waste Generator
Mark “Yes” if you are a generator of mixed waste (waste that is both hazardous and
radioactive). RCRA defines “mixed waste” as waste that contains both hazardous
waste and source, special nuclear, or by-product material subject to the Atomic
Energy Act (AEA), RCRA Section 1004(41), 42 U.S.C. 6903 (63 FR 17414; April 9,
1998). See the Definitions section.
5. Transporter of Hazardous Waste: If “Yes”, place an “X” in all that apply.
a. Transporter
You transport hazardous waste within the United States. The Federal
regulations for hazardous waste transporters are found in 40 CFR Part 263.
b. Transfer Facility (at your site)
You are a hazardous waste transfer facility, at your site, if you hold
manifested hazardous waste(s) at your site for a period of ten (10) days or
less while the waste is in transit. The Federal regulations for hazardous waste
transfer facilities are found in 40 CFR Part 263.12.
6. Treater, Storer, or Disposer of Hazardous Waste (at your site): If you treat,
store, or dispose of hazardous waste, mark “Yes”. A RCRA Hazardous Waste Part B
Permit is required for this activity. Contact the appropriate office for your State for
more information. The Federal regulations for owners and operators of permitted
treatment, storage, and disposal facilities (TSDFs) are found in 40 CFR Parts 264,
265, 266, and 270.
Mark “No” if any of the following conditions are true for your facility:
1. This facility does not receive hazardous waste from other generators and
ships all waste off-site for management within the regulatory timeframe.

19

Site ID Form
(continued)

2. This facility is only involved with on-going post-closure activities, corrective
actions under HSWA, or a consent order under a non-traditional permit or
without a RCRA permit being required.
3. Receives waste from off-site but does not store greater than 10 days before
re-shipping (i.e., transfer facility).

NOTE

If your site is a destination facility for universal wastes in addition to
being a treatment, storage, or disposal facility for other RCRA
hazardous wastes, mark “Yes” for both this box and Item 10.B.2.

7. Recycler of Hazardous Waste (at your site): If you recycle regulated hazardous
wastes (recyclable materials) at your site, mark “Yes”. The Federal regulations for
owners and operators of sites that recycle hazardous waste are found in 40 CFR
261.6. You also may be subject to other Federal and State regulations; in some cases
a permit is required.

NOTE

If your site, in addition to being a recycling site for hazardous waste,
is a treater, storer, or disposer of hazardous waste, mark “Yes” for
both this box and Item 10.A.6. If your site is a destination facility for
universal wastes in addition to being a recycling site for other RCRA
hazardous wastes, mark “Yes” for both this box and Item 10.B.2.

8. Exempt Boiler and/or Industrial Furnace (at your site): If “Yes”, place an “X” in
all that apply.
a. Small Quantity On-Site Burner Exemption
You burn small quantities of hazardous waste in an on-site boiler or
industrial furnace in accordance with the conditions in 40 CFR 266.108,
place an “X” in the box to indicate that you qualify for the Small Quantity
On-Site Burner Exemption.
b. Smelting, Melting, and Refining Furnace Exemption
You process hazardous wastes in a smelting, melting, or refining furnace
solely for metals recovery, as described in 40 CFR 266.100(d), or to recover
economically significant amounts of precious metals, as described in 40 CFR
266.100(g), or if you process hazardous wastes in a lead recovery furnace to
recover lead, as described in 40 CFR 266,100(h), place an “X” in the box to
indicate that you qualify for the Smelting, Melting, and Refining Furnace
Exemption.
9. Underground Injection Control (at your site): If you generate, treat, store, or
dispose of hazardous waste and place the waste or its residuals into an underground
injection well (e.g., a Class I well) located at your site, mark “Yes”. The Federal

20

Site ID Form
(continued)
regulations for owners and operators of underground injection wells are found in 40
CFR Part 148.
10. Receives Hazardous Waste From Off-site (at your site): If you received
hazardous waste from another site, whether this waste was received as a commercial
transaction or waste received from a restricted group of off-site generators, mark
“Yes”.
In addition to the above, mark “Yes” or “No” for the other regulated waste activities listed
below that may occur at this site. Complete Items B, C, and D as appropriate.
B. Universal Waste Activities (at your site): Refer to your State-specific requirements and
definitions for universal waste. Also, refer to 40 CFR 261.9 and 40 CFR Part 273 for the
Federal regulations covering universal waste. Complete parts 1 and 2.
1. Large Quantity Handler of Universal Waste (LQHUW): You are an LQHUW if
you accumulate a total of 5,000 kg or more total of universal wastes (batteries,
pesticides, mercury-containing equipment, or lamps - calculated collectively) at any
time. This designation is retained through the end of the calendar year in which the
5,000 kg limit is met or exceeded. If “Yes”, place an “X” in the appropriate box(es)
to indicate the type(s) of universal wastes managed at your site. If your State has
other additional universal wastes, indicate what they are by placing an “X” in the
corresponding box(es) (10.B.1.e, f, or g.).
2. Destination Facility for Universal Waste: Mark “Yes” if you treat, dispose, or
recycle universal wastes on-site. A hazardous waste permit is required if you treat or
dispose of universal wastes; a permit may be required if you recycle universal wastes.

NOTE

If your site, in addition to being a destination facility for universal
wastes, is also a treatment, storage, or disposal facility for RCRA
hazardous wastes, mark “Yes” for both this box and Item 10.A.6. In
addition, if your site recycles RCRA hazardous wastes, mark “Yes”
for both this box and Item 10.A.7.

C. Used Oil Activities: Mark the appropriate box(es) to indicate which used oil management
activities are taking place at this site. The Federal regulations for used oil management are
found in 40 CFR Part 279. Complete all parts 1 through 4.
1. Used Oil Transporter: If “Yes”, place an “X” in all that apply.
a. Transporter
You transport used oil within the United States. The Federal regulations for
used oil transporters are found in 40 CFR Part 279.40-47.
b. Transfer Facility (at your site)
You own or operate a used oil transfer facility. The Federal regulations for
used oil transfer facilities are found in 40 CFR Part 279.40-47.

21

Site ID Form
(continued)

2. Used Oil Processor and/or Re-refiner (at your site): If “Yes”, place an “X” in all
that apply.
a. Processor
You process used oil. The Federal regulations for processors of used oil are
found in 40 CFR Part 279.50-59.
b. Re-Refiner
You refine used oil. The Federal regulations for re-refiners of used oil are
found in 40 CFR Part 279.50-59.
3. Off-Specification Used Oil Burner (at your site): You burn off-specification used
oil fuel, mark “Yes” to indicate this used oil management activity.
4. Used Oil Fuel Marketer (at your site): If “Yes”, place an “X” in all that apply.
a. Marketer Who Directs Shipment of Off-Specification Used Oil to OffSpecification Used Oil Burners
You are a marketer who directs shipment of off-specification used oil to offspecification used oil burners. The Federal regulations for off-specification
used oil are found in 40 CFR Part 279.70-75.
b. Marketer Who First Claims the Used Oil Meets the Specification
You are the first to claim that used oil meets the used oil specification
established in 40 CFR 279.11.

NOTE

If either of these boxes is marked, you must also notify (or have
previously notified) as a used oil transporter (10.C.1), used oil
processor/re-refiner (10.C.2.), or off-specification used oil fuel
burner (10.C.3), unless you are a used oil generator. (Used oil
generators are not required to notify.)

D. Eligible Academic Entities with Laboratories – Notification for opting into or
withdrawing from managing laboratory hazardous wastes pursuant to 40 CFR Part 262
Subpart K: Note: Fill out Box D ONLY if you are at least one of the following: a college
or university; a teaching hospital that is owned by or has a formal written affiliation
agreement with a college or university; or a non-profit research institute that is owned by or
has a formal written affiliation agreement with a college or university; AND you have
checked with your State to determine if 40 CFR Part 262 Subpart K is effective in your state
and for any state-specific requirements. (See EPA’s website for more information about these
regulations: http://www.epa.gov/wastes/hazard/generation/labwaste/implementation.htm.)
Subpart K is an optional alternative set of requirements for eligible academic entities with
laboratories. Certain generators (i.e., eligible academic entities defined under (1) below) are
eligible to operate under Subpart K for management of their hazardous wastes in laboratories
in lieu of 40 CFR 262.34(c) (or 40 CFR 261.5 for CESQGs). Eligible academic entities with
laboratories that generate hazardous waste that elect to opt into Subpart K, are currently

22

Site ID Form
(continued)
operating under Subpart K, or subsequently withdraw from Subpart K must complete this
section to meet the notification requirements of this Subpart. Refer to 40 CFR 262.203 and
262.204.

NOTE

Eligible academic entities with laboratories must complete a separate Site ID
Form for each site (i.e., EPA ID number) that is managing hazardous waste
under Subpart K. All laboratories with the same EPA ID number will be
regulated under this Subpart. If eligible academic entities with laboratories
withdraw from Subpart K, all laboratories with the same EPA ID number
associated with the withdrawal from Subpart K will be regulated under 40
CFR 262.34(c) requirements (or 40 CFR 261.5 for CESQGs).

1. Opting Into or Currently Operating Under 40 CFR Part 262 Subpart K for the
Management of Hazardous Wastes in Laboratories: Mark “Yes” for this box if you
are an eligible academic entity and you elect to opt into or are currently operating under
40 CFR Part 262 Subpart K for the hazardous wastes generated in your laboratories. If
you mark “Yes” for this box, you must place an “X” in at least one of the following to
indicate your type of eligible academic entity. Place an “X” in all that apply:
a. College or University. You are an eligible college or university if you are a
private or public, post-secondary, degree-granting, academic institution, that
is accredited by an accrediting agency listed annually by the U.S. Department
of Education.
b. Teaching Hospital that is owned by or has a formal written affiliation
agreement with a college or university: You are an eligible teaching
hospital if you are a hospital that trains students to become physicians,
nurses, or other health personnel and is either: (1) owned by a college or
university, or (2) has a master affiliation agreement and program letter of
agreement, as defined by the Accreditation Council for Graduate Medical
Education, with an accredited medical program or medical school.
c. Non-profit Institute that is owned by or has a formal written affiliation
agreement with a college or university: You are an eligible non-profit
institute if you are an organization that conducts research as its primary
function and files as a non-profit organization under the tax code of 26
U.S.C. 501(c)(3) and is either: (1) owned by a college or university, or (2)
has a formal written affiliation agreement with a college or university that
establishes a relationship between institutions for the purposes of research
and/or education and is signed by authorized representatives from each
institution. A relationship on a project-by-project or grant-by-grant basis is
not considered a formal written affiliation agreement.
2. Withdrawing from 40 CFR Part 262 Subpart K for the Management of Hazardous
Wastes in Laboratories: Mark “Yes” for this box if you have previously elected to opt
into 40 CFR Part 262 Subpart K and are now withdrawing from participation in this
optional set of alternative requirements for hazardous waste generation in laboratories.
Withdrawing generators will automatically revert to regulation under 40 CFR 262.34 (c)

23

Site ID Form
(continued)
requirements (or 40 CFR 261.5 for CESQGs). If marking “Yes” for this box, please
include comments in Section 13 that explain your reasons for withdrawing from Subpart
K.
Item 11 – Description of Hazardous Wastes
Complete this item if you marked “Yes” for any activity 1 (a-c), 6, 7, or 8 in Item 10.A You will need to
refer to 40 CFR Part 261 to complete this item. Part 261 identifies those solid wastes which the EPA
defines as hazardous and regulates under RCRA. If you need help completing this section, please contact
your State Office.
A. Waste Codes for Federally Regulated Hazardous Wastes: Please list the waste codes of
the Federal hazardous wastes (described in 40 CFR Part 261) handled at your site. List them
in the order they are presented in the regulations using the appropriate 4-digit code(s) (e.g.,
D001, D003, F007, U112).

NOTE

EPA Hazardous Waste Codes. If you handle more hazardous wastes than will
fit under Item 11.A, please continue under Item 13 – Comments or on an
extra sheet. Remember to include your EPA Identification Number on the top
of each page. If you handle a large number of codes, you may copy the list in
this booklet and mark the ones that you handle. Attach any additional sheets
to the Site ID Form. Remember to include your EPA Identification Number
on the top of each page.

B. Waste Codes for State-Regulated (i.e., non-Federal) Hazardous Wastes: If you manage
State-regulated hazardous wastes that have a State waste code, enter the appropriate code(s)
in the box(es) provided. Please list the waste codes of the State-regulated hazardous wastes
handled at your site in the order they are presented in the regulations.

NOTE

State Hazardous Waste Code. If you handle more hazardous wastes than will
fit under Item 11.b, please continue under Item 13 – Comments or on an
extra sheet. Remember to include your EPA Identification Number on the top
of each page.

Item 12 – Notification of Hazardous Secondary Material (HSM) Activity
Mark “Yes” if you are notifying under 40 CFR 260.42 that you will begin managing, are still managing,
or will stop managing hazardous secondary material under 40 CFR 261.2(a)(2)(ii), 40 CFR 261.4(a)(23),
(24), or (25). Mark “No” if you are not notifying under 40 CFR 260.42. Note: You must check with your
State to determine if you are eligible to manage hazardous secondary material under these regulations.

NOTE

If you mark “Yes”, you must fill out the Addendum to the Site ID Form: Notification of
Hazardous Secondary Material Activity. See instructions for this Addendum after Item 14.

24

Site ID Form
(continued)

Item 13 – Comments
Use this section as needed to provide additional information for Items 1 through 12. Include the item
number and box letter (if any) for each comment you make. You may attach additional sheets if needed.
Remember to include your EPA Identification Number on the top of each page.
Item 14 – Certification
This certification must be signed and dated by the owner(s), operator(s), responsible official(s), or
authorized representative(s) of the site. (See 40 CFR 270.11 for more information on signatories in
general. See also 40 CFR 270.10(b) for additional Hazardous Waste Part A Permit Application signatory
specifics.) An “authorized representative” is a person responsible for the overall operation of the site (i.e.,
a plant manager or superintendent, or a person of equal responsibility).

NOTE

All Site ID Form submissions must include this certification to be complete.

25

ADDENDUM TO THE SITE IDENTIFICATION FORM: NOTIFICATION
OF HAZARDOUS SECONDARY MATERIAL ACTIVITY
You Must Fill Out This Section If:


You are located in a State that allows you to manage excluded hazardous secondary material
under 40 CFR 261.2(a)(2)(ii), 261.4(a)(23), (24), or (25). See
http://www.epa.gov/epawaste/hazard/dsw/statespf.htm for a list of eligible states; AND



You will begin managing, are still managing, or will stop managing excluded hazardous
secondary material under 40 CFR 261.2(a)(2)(ii), 40 CFR 261.4(a)(23), (24), or (25) and must
notify the appropriate State or Regional Office of your activities, pursuant to 40 CFR 260.42.
These regulations exclude certain hazardous secondary material being reclaimed from the RCRA
Subtitle C definition of solid waste provided certain requirements and conditions are met. See
EPA’s website for more information about these regulations:
http://www.epa.gov/epawaste/hazard/dsw/rulemaking.htm#2008.
Complete all parts 1-3.

You must be managing excluded hazardous secondary material in compliance with 40
CFR 261.2(a)(2)(ii), 261.4(a)(23), (24), and/or (25) (or state equivalent). Do not include
any information regarding your hazardous wastes in this section. See 73 FR 64668 or
http://www.epa.gov/epawaste/hazard/dsw/impresource.htm for more information on these
exclusions.
You must submit a completed Site ID Form, including this Addendum, prior to operating
under the exclusion(s) and by March 1 of each even-numbered year thereafter to your
regulatory authority using the Site ID Form as pursuant to 40 CFR 260.42. Persons who
must satisfy this notification requirement can submit this information at the same time as
their Biennial Report (which is also due by March 1 of each even-numbered year).

NOTE

If you stop managing hazardous secondary material in accordance with the exclusion(s)
and do not expect to manage any amount of hazardous secondary material under the
exclusion(s) for at least one year, you must also submit a completed Site ID Form,
including this Addendum, within thirty (30) days pursuant to 40 CFR 260.42.
Remember to include your EPA Identification Number on the top of each page.

Item 1 – Indicate Reason for Notification (include dates where requested):
Place an “X” in the box for the reason that applies to you:


Facility will begin managing excluded hazardous secondary material as of
(mm/dd/yyyy): Place an “X” in this box if you are notifying that you will begin managing
hazardous secondary material under the exclusion(s).


Facilities must notify prior to operating under the exclusion(s).

26

Addendum to the Site ID Form
(continued)






If placing an “X” in this box, list the date (mm/dd/yyyy) when you will begin
managing hazardous secondary material under 40 CFR 261.2(a)(2)(ii), 40 CFR
261.4(a)(23), (24), or (25). Note: If the facility had previously notified that it will stop
managing hazardous secondary material in the past but will now begin anew, list the
next planned start date.

Facility is still managing excluded hazardous secondary material/re-notifying as
required by March 1 of each even-numbered year: Place an “X” in this box if you are
re-notifying that you are still managing hazardous secondary material under the
exclusion(s). Note: you must have previously notified that you began managing hazardous
secondary materials in order to check this box.


Facilities must notify by March 1st of each even-numbered year.



If placing an “X” in this box, you do not have to list a date.

Facility has stopped managing excluded hazardous secondary material as of
(mm/dd/yyyy) and is notifying as required: Place an “X” in this box if you are notifying
that you have stopped managing hazardous secondary material under the exclusion(s) and
do not expect to manage any amount of hazardous secondary material for at least one year
(pursuant to 40 CFR 260.42(b)). List the date when you stopped managing hazardous
secondary material. Enter the date in “mm/dd/yyyy” format.


Facilities must notify within 30 days of when they stopped managing hazardous
secondary material. You are considered to have stopped managing hazardous
secondary material if: 1) you stop managing hazardous secondary material completely
(e.g., you cease operations); 2) you choose to manage the hazardous secondary
material as hazardous waste; 3) you undergo closure and request release from financial
assurance per 40 CFR 261.143(h); or 4) you temporarily suspend management of
hazardous secondary material for at least one year.



Only place an “X” in this box if you have stopped managing all hazardous secondary
material under the exclusion(s). For example, if your facility only stopped managing
one hazardous secondary material, but continued to manage another hazardous
secondary material, you would leave this box blank since your facility continues to
manage some amount of hazardous secondary material.



If you submit a notification that you have stopped managing hazardous secondary
material, you do not need to renotify (unless you choose to manage hazardous
secondary material again, in which case you would have to submit a notification prior
to managing). After submitting a stop notification, you can leave the Addendum blank
for subsequent submissions, including any subsequent biennial report submissions.

Item 2 – Description of Excluded Hazardous Secondary Material (HSM) Activity
In the table provided on the Addendum to the Site ID Form, list your appropriate facility code, each waste
code for the hazardous secondary material you manage, the estimated and actual quantities in short tons
for each hazardous secondary material, and the appropriate land-based unit code for how you mange the

27

Addendum to the Site ID Form
(continued)
hazardous secondary material. Do not include any information regarding your hazardous wastes in this
section. See examples below on how to answer this question.
a. Facility Code: Using the facility codes, found in the Code List section of these
instructions, enter the appropriate 2-digit code(s) that correctly describes your facility. If
more than one code applies to your facility, enter each 2-digit code on a separate row. Each
hazardous secondary material should be reported by facility code.
b. Waste Codes(s) for HSM: Use the box provided to enter the appropriate 4-digit
hazardous waste code(s) that would apply to your hazardous secondary material if you
managed it as hazardous waste (i.e., the waste code(s) that would apply if you did not
manage your material in accordance with 40 CFR 261.2(a)(2)(ii), 40 CFR
261.4(a)(23),(24), or (25)).

NOTE

c.

If you list more codes or manage more hazardous secondary material than
will fit in the table under Item 2, please continue under Item 13 –
Comments, or on an extra sheet. Remember to include your EPA ID
number on the top of each page.

Estimated Short Tons of Excluded HSM to be Managed Annually: In the box
provided, enter your estimated tonnage (using short tons) of hazardous secondary material
you expect to manage annually. Convert all physical quantities (e.g., gallons, cubic yards,
kilograms, metric tons, etc.) to short tons (1 short ton = 2,000 pounds) and round to the
nearest ton (no decimals). Note: Your estimated tonnage should be for the entire amount
of hazardous secondary material to be reclaimed (NOT just the quantity of constituent or
product reclaimed).

d. Actual Short Tons of Excluded HSM Managed During the Most Recent OddNumbered Year: Report the tonnage (using short tons) of each hazardous secondary
material you actually managed during the most recent odd-numbered year. For example, if
you are submitting this notification on February 20, 2012, enter the amount you actually
managed during 2011 (i.e., the tonnage you managed from January 1, 2011 to December
31, 2011). Convert all physical quantities (e.g., gallons, cubic yards, kilograms, metric
tons, etc.) to short tons (1 short ton = 2,000 pounds) and round to the nearest ton (no
decimals). Note: Your actual tonnage should be for the entire amount of hazardous
secondary material that was sent for reclamation (NOT just the quantity of constituent or
product reclaimed). If this is your initial notification, enter “0”.
e.

Land-Based Unit Code: Using the land-based unit codes, found in the Code List section
of these instructions, enter in the 2-digit code that best describes the land-based unit you
use or will use to manage the hazardous secondary material. If you do not use any landbased units, enter “NA”. If you use the code “OT” (Other), please describe your landbased unit in Item 13 – Comments. If more than one land-based unit code applies to a
hazardous secondary material, list it separately using another row.

28

Addendum to the Site ID Form
(continued)
Examples for Reporting Hazardous Secondary Material Activity:
EXAMPLE 1: A pharmaceutical manufacturer generates spent solvents that are characteristic for
ignitability (D001). The manufacturer plans to manage spent solvents under 40 CFR 261.2(a)(2)(ii) and
261.4(a)(24) by sending some amount to a reclaimer within its own company and the rest off-site to a
reclamation facility within the United States. The manufacturer will not manage any spent solvents in a
land-based unit. Following the regulations, the manufacturer submits an initial notification prior to
managing its spent solvents under the exclusions. The facility would report its hazardous secondary
material activity as follows:
a. Facility code
(answer using codes
listed in the Code List
section of the
instructions)

b. Waste Code(s) for
hazardous secondary
material (HSM)

c. Estimated
short tons of
HSM to be
managed
annually

d. Actual short tons
of HSM that was
managed during the
most recent oddnumbered year

e. Land-based unit
code (answer using
codes listed in the
Code List section of
the instructions)

02
06

D001
D001

15
40

0
0

NA
NA

EXAMPLE 2: A steel manufacturer generates electric arc furnace dust and spent pickle liquor from one
of its steel operations. The manufacturer sends electric arc furnace dust (K061) off-site to a reclamation
facility within the U.S. and reclaims spent pickle liquor (K062) on-site. Neither hazardous secondary
material is managed in a land-based unit. The steel manufacturer has managed both hazardous secondary
material under 40 CFR 261.2(a)(2)(ii) and 261.4(a)(24) for a number of years and it is now time to renotify. The facility would report its hazardous secondary material activity as follows:
a. Facility code
(answer using codes
listed in the Code List
section of the
instructions)

b. Waste Code(s) for
hazardous secondary
material (HSM)

c. Estimated
short tons of
HSM to be
managed
annually

d. Actual short tons
of HSM that was
managed during the
most recent oddnumbered year

e. Land-based unit
code (answer using
codes listed in the
Code List section of
the instructions)

01
06

K062
K061

60
20,000

52
22,468

NA
NA

EXAMPLE 3: A reclamation facility has been receiving and reclaiming spent solvents under 40 CFR
261.2(a)(2)(ii) and 261.4(a)(24) for a number of years. The facility receives and reclaims spent solvents
from multiple hazardous secondary material generators, some of which are within the same company. No
spent solvents are managed in a land-based unit. It is now time to re-notify. The facility would report its
hazardous secondary material activity as follows:
a. Facility code
(answer using codes
listed in the Code List
section of the
instructions)

b. Waste Code(s) for
hazardous secondary
material (HSM)

c. Estimated
short tons of
HSM to be
managed
annually

d. Actual short tons
of HSM that was
managed during the
most recent oddnumbered year

e. Land-based unit
code (answer using
codes listed in the
Code List section of
the instructions)

03
03
07
07

D001;F002;F003;F005
D001;D038;F002;F003
D001;F002;F003;F005
D001;D038;F002;F003

6,000
1,500
3,000
1,000

7,533
918
3,509
523

NA
NA
NA
NA

29

Addendum to the Site ID Form
(continued)

EXAMPLE 4: A smelting operation generates furnace bricks that are characteristic for chromium
(D007) and sends them off-site for reclamation. Before shipping the bricks off-site, the facility manages
some of the bricks in a containment building and the rest in a pile on the land. The facility has been
managing the bricks under 40 CFR 261.4(a)(24) for a number of years and must now re-notify. The
facility would report its activity as follows:
a. Facility code
(answer using codes
listed in the Code List
section of the
instructions)

b. Waste Code(s) for
hazardous secondary
material (HSM)

c. Estimated
short tons of
HSM to be
managed
annually

d. Actual short tons
of HSM that was
managed during the
most recent oddnumbered year

e. Land-based unit
code (answer using
codes listed in the
Code List section of
the instructions)

06
06

D007
D007

200
115

235
126

NA
PL

EXAMPLE 5: An intermediate facility has been managing wastewater treatment sludges from
electroplating operations (F006) for the past seven years but, due to company consolidation, it will soon
shut down. In accordance with 40 CFR 260.42, the facility notifies that it will stop managing hazardous
secondary material. The facility would report its activity as follows:
a. Facility code
(answer using codes
listed in the Code List
section of the
instructions)

b. Waste Code(s) for
hazardous secondary
material (HSM)

c. Estimated
short tons of
HSM to be
managed
annually

d. Actual short tons
of HSM that was
managed during the
most recent oddnumbered year

e. Land-based unit
code (answer using
codes listed in the
Code List section of
the instructions)

08

F006

0

5,034

NA

Item 3 – Facility has Financial Assurance Pursuant to 40 CFR 261.4(a)(24)(vi)
Financial assurance is required for reclaimers (07, 11) and intermediate (08) facilities managing
hazardous secondary material under 40 CFR 261.4(a)(24) and (25). See EPA’s website for more
information about these regulations: http://www.epa.gov/epawaste/hazard/dsw/impresource.htm.


Mark “Yes”, if you have financial assurance pursuant to 40 CFR 261.4(a)(24)(vi) AND
you use at least one facility code that is 07, 08, or 11 in Item 2.a above. For example, the
facilities in Examples 3 and 5 above are required to have financial assurance because the
facility codes are 07 and 08, respectively.



Mark “No”, if you do NOT have financial assurance pursuant to 40 CFR 261.4(a)(24)(vi).
Note: Reclaimers (07, 11) and intermediate (08) facilities must have financial assurance
in order to manage hazardous secondary material under 40 CFR 261.4(a)(24) and (25).
Answering “No” to this question may mean you are in violation of these regulations if you
report facility codes 07, 08, or 11. For example, the facilities in Examples 1, 2, and 4
above are not required to have financial assurance because these facilities did not report
facility codes of 07, 08, or 11.

30

Notification of RCRA
Subtitle C Activity
OTHER REFERENCE INFORMATION
AND
CODE LISTS

EXCLUDED WASTES
This section presents a partial list of excluded materials and wastes. This list includes materials excluded
from the definition of solid waste in 40 CFR 261.4(a) and solid wastes excluded from the definition of
hazardous waste in 40 CFR 261.4(b). In addition, it also includes specific solid waste samples that are
excluded from the definition of hazardous waste in 40 CFR 261.4(d)-(f). Finally, this list includes
specific hazardous wastes, as described in 40 CFR 261.4(c), that are exempted from certain RCRA
Subtitle C regulations.
Agricultural Waste Fertilizer
§261.4(b)(2)

Household Waste
§261.4(b)(1)(i)-(ii)

Secondary Material Returned to
Original Process
§261.4(a)(8)

Analytical Samples
§261.4(d)

HTMR Condenser Residue
§261.4(a)(11)

Arsenic Treated Wood and Wood
Products
§261.4(b)(9)

In situ Mining Materials
§261.4(a)(5)

Secondary Material from Mineral
Processing
§261.4(a)(17)

Irrigation Return Flows
§261.4(a)(3)

Shredded Circuit Boards Being
Recycled
§261.4(a)(14)

Coking By-products
§261.4(a)(10)

Kraft Mill Steam Stripper
Condensates
§261.4(a)(15)

Spent Caustics from Petroleum
Refining
§261.4(a)(19)

Comparable/Syn gas Fuels
§261.4(a)(16)

Leachate
§261.4(b)(15)

Spent Wood Preserving Solutions and
Wastewaters
§261.4(a)(9)

Domestic Sewage
§261.4(a)(1)

Mining and Mineral Process Wastes
§261.4(b)(7)

Dredged Material
§261.4(g)

Mining Overburden
§261.4(b)(3)

Drilling Fluid
§261.4(b)(5)

Nuclear Material
§261.4(a)(4)

Excluded Scrap Metal Being Recycled
§261.4(a)(13)

Oil Filters
§261.4(b)(13)

Exported Wastes
§262.56

Petrochemical Recovered Oil
§261.4(a)(18)

Fossil Fuel Emission Control Waste
§261.4(b)(4)

Petroleum-contaminated Media and
Debris
§261.4(b)(10)

Cement Kiln Dust
§261.4(b)(8)

Hazardous Secondary Material
Generated and Reclaimed Under the
Control of the Generator
40 CFR 261.2(a)(2)(ii)
40 CFR 261.4(a)(23)
Hazardous Secondary Material
Transferred Off-site for Reclamation
40 CFR 261.4(a)(24)
40 CFR 261.4(a)(25)

Sulfuric Acid
§261.4(a)(7)
Treatability Study Samples
§261.4(e)
Treatability Studies at Laboratories
and Testing Facilities
§261.4(f)
Trivalent Chromium Waste
§261.4(b)(6)
Used Oil Distillation Bottoms
§261.4(b)(14)

Petroleum Refining
§261.4(a)(12)

Wastes Generated in Storage Tanks,
Transport Vehicles, Pipelines, or
Manufacturing Process Units
§261.4(c)

Pulping Liquor
§261.4(a)(6)

Wastewater Point Source Discharge
§261.4(a)(2)

Refrigerants
§261.4(b)(12)

32

DEFINITIONS
This section contains definitions of terms helpful for completing the form. For terms defined in the Code
of Federal Regulations (CFR), the appropriate citation is provided.

Accumulation

A site that does not hold RCRA Interim Status or a RCRA permit may
accumulate hazardous waste for a short period of time before shipping it
off-site. The waste must be accumulated in either tanks or containers; it
may not be accumulated in surface impoundments.
Generators of more than 1,000 kg (2,200 lbs) of hazardous waste per month
may accumulate their waste for up to 90 days before shipping it off-site.
Generators of 100 kg (220 lbs) to 1,000 kg (2,200 lbs) of hazardous waste
per month may accumulate their waste for up to 180 days before shipping it
off-site. If the nearest treatment, storage, disposal, or recycling facility to
which they can send their waste is more than 200 miles away, they may
accumulate their waste for 270 days. See 40 CFR 262.34.

Act or RCRA

The Solid Waste Disposal Act, as amended by the Resource Conservation
and Recovery Act of 1976, as amended by the Hazardous and Solid Waste
Amendments of 1984, 42 U.S.C. Section 6901 et seq.

Acute Hazardous Waste

Any hazardous waste with an EPA hazardous waste code beginning with the
letter “P” (40 CFR 261.33(e)) or any of the following “F” codes: F020,
F021, F022, F023, F026, and F027 (40 CFR 261.31). These wastes are
subject to stringent quantity standards for accumulation and generation (40
CFR 261.5(e)).

Authorized
Representative

The person responsible for the overall operation of the site or an operational
unit (i.e., part of a site), e.g., superintendent or plant manager, or person of
equivalent responsibility.

Authorized State

A State that has obtained authorization from the EPA to direct its own
RCRA program.

Boiler

An enclosed device using controlled flame combustion and having the
following characteristics:
1. The unit has physical provisions for recovering and exporting
energy in the form of steam, heated fluids, or heated gases;
2. The unit's combustion chamber and primary energy recovery
section(s) are of integral design (i.e., they are physically formed into
one manufactured or assembled unit);
3. The unit continuously maintains an energy recovery efficiency of at
least 60 percent, calculated in terms of the recovered energy
compared with the thermal value of the fuel;
4. The unit exports and utilizes at least 75 percent of the recovered
energy, calculated on an annual basis (excluding recovered heat
used internally in the same unit, for example, to preheat fuel or
combustion air or drive fans or feedwater pumps); or
5. The unit is one which the Regional Administrator has determined,
on a case-by-case basis, to be a boiler, after considering the
standards in 40 CFR 260.32

33

Definitions
(continued)
By-product Material

A by-product material is (1) any radioactive material (except special nuclear
material) yielded in or made radioactive by exposure to the radiation
incident to the process of producing or utilizing special nuclear material;
and (2) the tailings or wastes produced by the extraction or concentration of
uranium or thorium from any ore processed primarily for its source material
content (defined in the Atomic Energy Act of 1954).

Code of Federal
Regulations (CFR)

Codification of the general and permanent rules published in the Federal
Register by the Executive departments and agencies of the Federal
Government. The Code is divided into 50 titles which represent broad areas
subject to Federal regulation. Each title is divided into chapters that usually
bear the name of the issuing agency. Each chapter is further subdivided into
parts covering specific regulatory areas. The CFR title applicable for the
Hazardous Waste Report is “40,” as in “40 CFR 262.34.”

Conditionally Exempt
Small Quantity
Generator (CESQG) of
Hazardous Waste

A generator that meets the following criteria:
In every month during the year, the site did all of the following:
1. Generates no more than 100 kg (220 lbs.) of RCRA hazardous
waste in any calendar month; and
2. Did not accumulate, at any time, more than 1,000 kg (2,200 lbs.) of
RCRA hazardous waste; and
3. Did not generate, in any calendar month, or accumulate at any time,
more than 1 kg (2.2 lbs.) of acute hazardous waste, and no more
than 100 kg (220 lbs.) of material from the cleanup of a spill of
acute hazardous waste.

Confidential Business
Information (CBI)

Information a facility does not wish to make available to the general public
for competitive business reasons. Confidential Business Information (CBI)
may be claimed for certain information in your submittal. A claim may be
made in accordance with 40 CFR Part 2, Subpart B.

Delisted Waste

Site-specific wastes excluded from regulation under 40 CFR 260.20 and
260.22. A waste at a particular generating site may be excluded by
petitioning the EPA Administrator for a regulatory amendment. These
wastes are listed in Appendix IX of 40 CFR Part 261.

Disposal

The discharge, deposit, injection, dumping, spilling, leaking, or placing of
any solid waste or hazardous waste into or on any land or water so that such
solid waste or hazardous waste or any constituent thereof may enter the
environment or be emitted into the air or discharged into any waters,
including ground waters.

Eligible Academic Entity

A college or university, or a non-profit research institute that is owned by or
has a formal written affiliation with a college or university, or a teaching
hospital that is owned by or has a formal written affiliation with a college or
university pursuant to 40 CFR Part 262 Subpart K (See 40 CFR 262.200).

34

Definitions
(continued)
Environmental
Protection Agency (EPA)

EPA, also called U.S. EPA, means the United States Environmental
Protection Agency. Some State environmental authorities may be called the
EPA also, as in “Illinois EPA.”

EPA Identification (ID)
Number

The number assigned by the EPA to each hazardous waste generator,
hazardous waste transporter, and treatment, storage, or disposal facility;
United States importer of hazardous waste; mixed waste (hazardous and
radioactive) generator; recycler of hazardous waste; exempt boiler and/or
industrial furnace burning or processing hazardous waste; large quantity
handler of or destination facility for universal wastes; disposer of hazardous
waste with an underground injection permit; used oil transporter, used oil
processor/re-refiner, off-specification used oil fuel burner, used oil fuel
marketer; eligible academic entity managing laboratory hazardous waste
under Subpart K; or site undergoing corrective action. Additionally,
facilities that must notify using the Site ID Form and Addendum to the Site
ID Form that they are managing hazardous secondary material will also be
assigned an EPA ID number.

Excluded Wastes

Wastes excluded from the definition of solid or hazardous waste under 40
CFR 261.3 and 261.4. For a partial listing, see the “Other Reference
Information” section of this booklet.

Hazardous Waste

A hazardous waste as defined in 40 CFR 261.3.

Hazardous Secondary
Material (HSM)

A secondary material (e.g., spent material, by-product, or sludge) that, when
discarded, would be identified as hazardous waste under 40 CFR Part 261.
Facilities managing hazardous secondary material under 40 CFR
261.2(a)(2)(ii), 40 CFR 261.4(a)(23), (24), or (25) must complete the
Addendum to the Site Identification Form: Notification for Managing
Hazardous Secondary Material. You must check with your State to
determine if you are eligible to manage hazardous secondary material under
these exclusions
(see also http://www.epa.gov/epawaste/hazard/dsw/statespf.htm).

Hazardous Waste
Generator

Any person, by site, whose act or process produces hazardous waste
identified or listed in 40 CFR Part 261.

Hazardous Waste
Number or Code, EPA

The number (or code) assigned by the EPA to each hazardous waste listed in
40 CFR Part 261, Subpart D and to each characteristic identified in 40 CFR
Part 261, Subpart C. The codes consist of one letter (D, F, P, U, or K) and
three numbers. For a list of EPA hazardous waste codes see the “Other
Reference Information” section of this booklet.

Hazardous Waste
Number or Code, State

The number (or code) assigned by the State to each hazardous waste listed
in the State regulations. Obtain a list of the States waste codes from your
State.

Hazardous Waste
Storage

The holding of hazardous waste for a temporary period, at the end of which
the hazardous waste is treated, disposed of, or stored elsewhere.

35

Definitions
(continued)
Hazardous Waste
Transfer Facility

Refer to “Transfer Facility" definition.

Hazardous Waste
Transporter

Refer to “Transporter" definition.

Hazardous Waste
Treatment

Any method, technique, or process, including neutralization, designed to
change the physical, chemical, or biological character or composition of any
hazardous waste so as to neutralize such hazardous waste, or so as to
recover energy or material resources from the hazardous waste, or so as to
render such hazardous waste nonhazardous, or less hazardous; safer to
transport, store or dispose of; or amenable for recovery, amenable for
storage, or reduced in volume. Such term includes any activity or
processing designed to change the physical form or composition of
hazardous waste so as to render it nonhazardous.

Incineration

Burning of certain types of solid, liquid, or gaseous materials; or a treatment
technology involving destruction of waste by controlled burning at high
temperatures (e.g., burning sludge to remove the water and reduce the
remaining residues to a safe, non-burnable ash that can be disposed safely
on land, in some waters, or in underground locations).

Industrial Furnace

Any of the following enclosed devices that are integral components of
manufacturing processes and that use thermal treatment to accomplish
recovery of materials or energy: cement kilns; lime kilns; aggregate kilns;
phosphate kilns; coke ovens; blast furnaces; smelting, melting and refining
furnaces; titanium dioxide chloride process oxidation reactors; methane
reforming furnaces; pulping liquor recovery furnaces; combustion devices
used in the recovery of sulfur values from spent sulfuric acid; halogen acid
furnaces, as defined under industrial furnace in 40 CFR 260.10; and such
other devices as the Administrator may add to this list.

Interim (Permit)
Status

Period during which the owner/operator of an existing TSD facility is
treated as having been issued a RCRA permit even though he/she has not
yet received a final determination. An existing facility should have
automatically qualified for interim status if the owner/operator filed both
timely “notification” and the first part (Part A) of the RCRA permit
application. Interim status continues until a final determination is made to
issue or deny the permit. Owner/operator of new facilities cannot by
definition qualify for interim status; rather, they need a RCRA permit prior
to beginning construction of a hazardous waste management facility.

Large Quantity
Generator (LQG) of
Hazardous Waste

A generator that meets any of the following criteria:
1. Generates, in a calendar month, 1,000 kg (2,200 lbs.) or more of
non-acute RCRA hazardous waste; or
2. Generates, in a calendar month, or accumulates at any time, more
than 1 kg (2.2 lbs.) of RCRA acute hazardous waste; or
3. Generates, in a calendar month, or accumulates at any time, more
than 100 kg (220 lbs.) of spill cleanup material contaminated with
RCRA acute hazardous waste.

36

Definitions
(continued)
Large Quantity Handler
of Universal Waste
(LQHUW)

A universal waste handler (as defined in 40 CFR 273.9) who accumulates
5,000 kg or more total of universal wastes (batteries, pesticides, mercurycontaining equipment, or lamps – calculated collectively) at any time. This
designation is retained through the end of the calendar year in which the
5,000 kg limit is met or exceeded.

Management, or
Hazardous Waste
Management

Systematic control of the collection, source separation, storage,
transportation, processing, treatment, recovery, or disposal of hazardous
waste (40 CFR 260.10).

Manifest, Uniform
Hazardous Waste

The shipment document EPA form 8700-22 and, if necessary, Form 870022A, originated and signed by a generator in accordance with the
instructions included in the appendix to 40 CFR Part 262. The “cradle-tograve” paperwork must accompany a shipment of hazardous waste as it
moves from the generator to the transporter and eventually to the hazardous
waste management facility.

Mixed Waste

Waste that contains both hazardous and source, special nuclear, or byproduct material subject to the Atomic Energy Act (AEA), RCRA section
1004(41), 42 U.S.C. 6903 (63 FR 17414; April 9, 1998).

Municipality

A city, village, town, borough, county, parish, district, association, Indian
tribe or authorized Indian tribal organization, designated and approved
management agency under Section 208 of the Clean Water Act, or any other
public body created by or under State law and having jurisdiction over
disposal of sewage, industrial wastes, or other wastes.

Off-site Facility

A hazardous waste treatment, storage, disposal, or recycling area located at
a place away from the generating site.

Off-Specification Used
Oil Burner

A site where used oil not meeting the specification requirements in 40 CFR
279.11 (off-specification used oil) is burned for energy recovery in devices
identified in Section 279.61(a).

Off-Specification Used
Oil Fuel

Used oil fuel that does not meet the specification provided under 40 CFR
279.11.

On-site Facility

A hazardous waste treatment, storage, disposal, or recycling area located on
the generating site.

On-Specification Used
Oil Fuel

Used oil fuel that meets the specification provided under 40 CFR 279.11.

Operator

The person responsible for the overall operation of a RCRA site.
Note: This is the legal entity which controls the RCRA site operation rather
than the plant or site manager. This is usually a company or business name,
not an individual. See Person.

Owner

The person who owns a RCRA site or part of a RCRA site. Note: This
includes the owner(s) of the building(s) and/or land. This may be an
individual, company, or business name. See Person.

37

Definitions
(continued)
Person

An individual, trust, firm, joint stock company, Federal Agency, corporation
(including a government corporation), partnership, association, State,
municipality, commission, political subdivision of a State, or any interstate
body.

Resource Conservation
and Recovery Act
(RCRA)

The Solid Waste Disposal Act as amended by the Resource Conservation
and Recovery Act (RCRA) (40 CFR 270.2). It is the Federal statute that
regulates the generation, treatment, storage, disposal, recycling, and/or
transportation of solid and hazardous waste.

RCRA Interim (Permit)
Status

Refer to “Interim (Permit) Status” definition.

RCRA Permit

A complete RCRA permit is comprised of an operating permit for hazardous
waste treatment, storage, and disposal, and a corrective action permit
addressing releases from solid waste management unit (SWMUs). To apply
for a permit, a site must file a two-part application (Part A and Part B). A
facility is not considered to have a complete RCRA permit until both parts
have been issued.

RCRA Subtitle C Site
(RCRA Site or Site)

The physical plant or location at which one or more of the following
regulated waste activities occurs: the generation, transportation, treatment,
storage, or disposal of hazardous wastes; recycling of hazardous wastes;
United States importer of hazardous waste; mixed waste (hazardous and
radioactive) generator; exempt boiler and/or industrial furnace burning or
processing hazardous waste; large quantity handler of or destination facility
for universal wastes; disposing hazardous waste with an underground
injection permit; the transportation (and temporary storage during
transportation), processing/re-refining, burning, or marketing of used oil;
eligible academic entity managing laboratory hazardous waste under
Subpart K; facility managing hazardous secondary material being reclaimed
that must comply with certain requirements and conditions; or undergoing
corrective action.
A site may consist of several treatment, storage, or disposal operational
units. For entities that only transport regulated wastes, the term site refers to
the headquarters of that entity’s operations.

Recycling

Use, reuse, or reclamation of a material (40 CFR 261.1(c)(7)).
“Reclamation” is the processing or regeneration of a material to recover a
usable product (e.g., recovery of lead values from spent batteries,
regeneration of spent solvents) (40 CFR 261.1(c)(4)). A material is “used or
reused” if it is either: (1) employed as an ingredient (including use as an
intermediate) in an industrial process to make a product (e.g., distillation
bottoms from one process used as feedstock in another process) (40 CFR
261.1(c)(5)). However, a material will not satisfy this condition if distinct
components of the material are recovered as separate end products (as when
metals are recovered from metal-containing secondary material); or (2)
employed in a particular function or application as an effective substitute for
a commercial product (e.g., spent pickle liquor used as phosphorous
precipitant and sludge conditioner in wastewater treatment).

38

Definitions
(continued)
Small Quantity
Generator (SQG) of
Hazardous Waste

A generator that meets all the following criteria:
1. Generates, in any calendar month, more than 100 kg (220 lbs.) but
less than 1,000 kg (2,200 lbs.) of RCRA hazardous waste; and
2. Does not generate, in any calendar month, or accumulates at any
time, more than 1 kg (2.2 lbs.) of acute hazardous waste and
3. Does not generate more than 100 kg (220 lbs.) of material from the
cleanup of a spill of acute hazardous waste.
OR, a site is a Small Quantity Generator if the site:
1. Meets 1) and 3) of the Conditionally Exempt Small Quantity
Generator criteria (see definition), but
2. Is storing more than 1,000 kg (2,200 lbs.) of RCRA hazardous
waste on-site. If the site accumulates, at any time, more than 1,000
kg (2,200 lbs.) of RCRA hazardous waste, the site must apply for
an EPA ID Number using this form.

Small Quantity On-Site
Burner Exemption

The persons who burn small quantities of hazardous waste in an on-site
boiler or industrial furnace, in accordance with 40 CFR 266.108, are
conditionally exempt from regulation for that activity.

Smelting, Melting, and
Refining Furnace
Exemption

Under 40 CFR 266.100(c), owners or operators of smelting, melting, and
refining furnaces that process hazardous wastes solely for metals recovery
are conditionally exempt from regulation, except for 40 CFR 266.101 and
266.112, provided they comply with limited requirements set forth in
Section 266.100(c). Similarly, 40 CFR 266.100(f) provides that owners or
operators of smelting, melting and refining furnaces that process hazardous
wastes for the recovery of precious metals are conditionally exempt from
regulation, except for 40 CFR 266.112, provided they comply with limited
requirements specified in Section 266.100(f).

Solid Waste

Any garbage, refuse, or sludge, or other materials not excluded under 40
CFR 261.4(a). Exclusions include, for example, domestic sewage and any
mixture of other wastes that pass through a sewer system to a publicly
owned treatment works (POTWs); industrial wastewater discharges that are
point source discharges subject to regulation under the Clean Water Act;
irrigation return flows; nuclear materials defined by the Atomic Energy Act;
and in situ mining materials (see the “Other Reference Information” section
of this booklet.). Wastewaters being collected, stored, or treated before
discharge and sludges generated by wastewater treatment are not excluded.
The EPA defines hazardous waste as a subset of solid waste.

Source Material

As defined by the Atomic Energy Act of 1954: (1) Uranium, thorium, or
any other material determined by the Nuclear Regulatory Commission
pursuant to the provisions of Section 2091 of this title to be source material;
or (2) ores containing one or more of the foregoing materials in such
concentration as the Commission may by regulation determine from time to
time.

39

Definitions
(continued)
Special Nuclear Material

As defined by the Atomic Energy Act of 1954: (1) plutonium, uranium
enriched in the isotope 233 or in the isotope 235, and any other material
which the Nuclear Regulatory Commission, pursuant to the provisions of
Section 2071 of this title, determines to be special nuclear material, but does
not include source material; or (2) any material artificially enriched by any
of the foregoing, but does not include source material.

Subpart K

An alternative set of generator requirements for managing laboratory
hazardous waste at eligible academic entities. Generators that are eligible
academic entities with laboratories may elect to opt into 40 CFR Part 262
Subpart K and manage their laboratory hazardous waste under Subpart K in
lieu of 40 CFR 262.34(c) (or 40 CFR 261.5 for CESQGs). In order for
eligible academic entities (see definition) to opt into Subpart K or
subsequently withdraw from Subpart K, they must use the Site ID Form to
notify the appropriate State or EPA Regional Office. Refer to 40 CFR
262.203 and 262.204. Note: You must check with your State to determine
if you are eligible to manage laboratory hazardous waste pursuant to 40
CFR Part 262 Subpart K and for any state-specific requirements.

Tolling

Tolling arrangements describe a particular type of recycling contract
between two companies. Specifically, the “tolling” company certifies that it
has a contract with a manufacturer to produce a product, and that
manufacturing process generates a residual material that can be recycled by
the tolling company. If the tolling company certifies that the contract
specifies that the tolling company owns and has responsibility for the
recyclable material once it is generated, and the material is returned to the
tolling company for reclamation, and subsequently recycled, the material is
excluded from regulation (under 40 CFR 261.2(a)(2)(ii) or 261.4(a)(23)),
provided certain requirements are met.

Transfer Facility

Any transportation-related facility including loading docks, parking areas,
storage areas, and other similar areas where shipments of hazardous waste
are held for 10 days or less during the normal course of transportation (40
CFR 260.10 and 40 CFR 263.12).

Transporter

A person engaged in the off-site transportation of hazardous waste by air,
rail, highway, or water.

Underground Injection
Control

The subsurface emplacement of fluids through a bored, drilled or driven
well; or through a dug well, where the depth of the dug well is greater than
the largest surface dimension. Underground injection wells are regulated
under both the Safe Drinking Water Act and the Resource Conservation and
Recovery Act (see 40 CFR Part 148).

United States Importer

Any person who imports hazardous waste from a foreign country into the
United States. This does not include hazardous waste shipped from a
foreign Department of Defense site, Maquiladora, United States territory or
protectorate.

40

Definitions
(continued)
Universal Waste

Any of the following hazardous wastes that are managed under the universal
waste requirements of 40 CFR Part 273: batteries, pesticides, mercurycontaining equipment, and lamps. Some States may have State-specific
universal wastes defined as well.

Used Oil

Any oil that has been refined from crude oil, or any synthetic oil, that has
been used, and as a result of such use, is contaminated by physical or
chemical impurities.

Used Oil Fuel Marketer

Any person who conducts either of the following activities:
1. Directs a shipment of off-specification used oil from their site to an
off-specification used oil burner; or
2. First claims that used oil that is to be burned for energy recovery
meets the used oil fuel specifications set forth in 40 CFR 279.11.

Used Oil Management
Activities

For the purposes of the Site ID Form, includes used oil transportation; used
oil processing and re-refining; burning off-specification used oil fuel; and
used oil fuel marketing.

Used Oil Processing

Chemical or physical operations designed to produce from used oil, or to
make used oil more amenable for production of, fuel oils, lubricants, or
other used oil-derived products. Processing includes, but is not limited to:
blending used oil with virgin petroleum products, blending used oils to meet
the fuel specification, filtration, simple distillation, chemical or physical
separation, and re-refining.

Used Oil Processor

A site that processes on- specification or off-specification used oil.

Used Oil Re-Refiner

A site that produces lubricating oils and greases, industrial fuel, asphalt
extender, gasoline, and other products from on- specification or offspecification used oil.

Used Oil Transfer
Facility

Any transportation-related facility, including loading docks, parking areas,
storage areas, and other areas where shipments of used oil are held for more
than 24 hours during the normal course of transportation and not longer than
35 days. Transfer facilities that store used oil for more than 35 days are
subject to regulation under 40 CFR Part 279, Subpart F.

Used Oil Transporter

Any person who transports used oil, any person who collects used oil from
more than one generator and transports the collected oil, and owners and
operators of used oil transfer facilities. Used oil transporters may
consolidate or aggregate loads of used oil for purposes of transportation but,
with the following exception, may not process used oil. Used oil
transporters may conduct incidental processing operations that occur in the
normal course of used oil transportation (e.g., settling and water separation),
but that are not designed to produce (or make more amenable for production
of) used oil-derived products or used oil fuel.

41

EPA HAZARDOUS WASTE CODES
A list of all the hazardous waste codes is shown below. See the regulations for details.
CHARACTERISTICS OF HAZARDOUS WASTE (SEE
40 CFR 261.24) – DXXX
HAZARDOUS WASTE FROM NON-SPECIFIC
SOURCES (SEE 40 CFR 261.31) – FXXX
HAZARDOUS WASTE FROM SPECIFIC SOURCES
(SEE 40 CFR 261.32) - KXXX

D001
D002
D003
D004
D005
D006
D007
D008
D009
D010
D011
D012
D013
D014
D015
D016
D017
D018
D019
D020
D021
D022
D023
D024
D025
D026
D027
D028
D029
D030
D031
D032
D033
D034
D035
D036
D037
D038
D039
D040
D041
D042
D043

F001
F002
F003
F004
F005
F006
F007
F008
F009
F010
F011
F012
F019
F020
F021
F022
F023
F024
F025
F026
F027
F028
F032
F034
F035
F037
F038
F039

K001
K002
K003
K004
K005
K006
K007
K008
K009
K010
K011
K013
K014
K015
K016
K017
K018
K019
K020
K021
K022
K023
K024
K025
K026
K027
K028
K029
K030
K031
K032
K033
K034
K035
K036
K037
K038
K039
K040
K041
K042
K043
K044
K045
K046

K047
K048
K049
K050
K051
K052
K060
K061
K062
K069
K071
K073
K083
K084
K085
K086
K087
K088
K093
K094
K095
K096
K097
K098
K099
K100
K100
K101
K102
K103
K104
K105
K106
K107
K108
K109
K110
K111
K112
K113
K114
K115
K116
K117
K118

K123
K124
K125
K126
K131
K132
K136
K141
K142
K143
K144
K145
K147
K148
K149
K150
K151
K156
K157
K158
K159
K161
K169
K170
K171
K172
K174
K175
K176
K177
K178
K181

P001
P002
P003
P004
P005
P006
P007
P008
P009
P010
P011
P012
P013
P014
P015
P016
P017
P018
P020
P021
P022
P023
P024
P026
P027
P028
P029
P030
P031
P033
P034
P036
P037
P038
P039
P040
P041
P042
P043
P044
P045
P046
P047
P048
P049

P050
P051
P054
P056
P057
P058
P059
P060
P062
P063
P064
P065
P066
P067
P068
P069
P070
P071
P072
P073
P074
P075
P076
P077
P078
P081
P082
P084
P085
P087
P088
P089
P092
P093
P094
P095
P096
P097
P098
P099
P101
P102
P103
P104
P105

DISCARDED COMMERCIAL CHEMICAL PRODUCTS,
OFF-SPECIFICATION SPECIES, CONTAINER
RESIDUALS, AND SPILL RESIDUES THEREOF –
ACUTE HAZARDOUS WASTE (SEE 40 CFR 261.33) –
PXXX
DISCARDED COMMERCIAL CHEMICAL PRODUCTS,
OFF-SPECIFICATION SPECIES, CONTAINER
RESIDUES, AND SPILL RESIDUES THEREOF –
TOXIC WASTES (SEE 40 CFR 261.33) - UXXX
P106
P108
P109
P110
P111
P112
P113
P114
P115
P116
P118
P119
P120
P121
P122
P123
P127
P128
P185
P188
P189
P190
P191
P192
P194
P196
P197
P198
P199
P201
P202
P203
P204
P205

42

U001
U002
U003
U004
U005
U006
U007
U008
U009
U010
U011
U012
U014
U015
U016
U017
U018
U019
U020
U021
U022
U023
U024
U025
U026
U027
U028
U029
U030
U031
U032
U033
U034
U035
U036
U037
U038
U039
U041
U042
U043
U044
U045
U046
U047

U048
U049
U050
U051
U052
U053
U055
U056
U057
U058
U059
U060
U061
U062
U063
U064
U066
U067
U068
U069
U070
U071
U072
U073
U074
U075
U076
U077
U078
U079
U080
U081
U082
U083
U084
U085
U086
U087
U088
U089
U090
U091
U092
U093
U094

U095
U096
U097
U098
U099
U101
U102
U103
U105
U106
U107
U108
U109
U110
U111
U112
U113
U114
U115
U116
U117
U118
U119
U120
U121
U122
U123
U124
U125
U126
U127
U128
U129
U130
U131
U132
U133
U134
U135
U136
U137
U138
U140
U141
U142

U143
U144
U145
U146
U147
U148
U149
U150
U151
U152
U153
U154
U155
U156
U157
U158
U159
U160
U161
U162
U163
U164
U165
U166
U167
U168
U169
U170
U171
U172
U173
U174
U176
U177
U178
U179
U180
U181
U182
U183
U184
U185
U186
U187
U188

U189
U190
U191
U192
U193
U194
U196
U197
U200
U201
U202
U203
U204
U205
U206
U207
U208
U209
U210
U211
U213
U214
U215
U216
U217
U218
U219
U220
U221
U222
U223
U225
U226
U227
U228
U234
U235
U236
U237
U238
U239
U240
U243
U244
U246

U247
U248
U249
U271
U278
U279
U280
U328
U353
U359
U364
U367
U372
U373
U387
U389
U394
U395
U404
U409
U410
U411

HSM FACILITY CODES
Facility codes describe the specific regulation a facility uses to manage its hazardous secondary material
(HSM) and the type of activity the facility performs under that regulation (e.g., generator, reclaimer).
Review the groups and pick the appropriate code. If more than one facility code applies to you, enter
each code on a separate row under Item 2 of the Addendum to the Site ID Form.
Under Control of the Generator Exclusion (40 CFR 261.2(a)(2)(ii) or 261.4(a)(23))
Code

01

02

03

04

05

Facility Code Description

HSM Generator reclaiming HSM “on-site”: This code applies if you generate and reclaim hazardous
secondary material at your generating facility. See also paragraph (1) in the Federal definition of
“Hazardous secondary material generated and reclaimed under the control of the generator” in 40 CFR
Part 260.10
HSM Generator transferring HSM to reclaimer within the “same company”: This code applies if
you generate hazardous secondary material and send the material for reclamation to a different facility
that is either controlled by you or controlled by the same person that controls your generating facility. See
also paragraph (2) in the Federal definition of “Hazardous secondary material generated and reclaimed
under the control of the generator” in 40 CFR Part 260.10.
Reclaimer receiving HSM from HSM generator within the “same company”: This code applies if
you receive and reclaim hazardous secondary material from a different facility that either controls you or
is controlled by the same person that controls you. See also paragraph (2) in the Federal definition of
“Hazardous secondary material generated and reclaimed under the control of the generator” in 40 CFR
Part 260.10.
Tolling Contractor reclaiming HSM pursuant to a tolling contract: This code applies if you are a
tolling contractor that reclaims hazardous secondary material pursuant to a written contract with a toll
manufacturer. See also paragraph (3) in the Federal definition of “Hazardous secondary material
generated and reclaimed under the control of the generator” in 40 CFR Part 260.10.
Toll Manufacturer managing HSM pursuant to a tolling contract: This code applies if you generate
and send hazardous secondary material for reclamation to a tolling contractor pursuant to a written
contract. See also paragraph (3) in the Federal definition of “Hazardous secondary material generated
and reclaimed under the control of the generator” in 40 CFR Part 260.10.

Transfer-based Exclusion (40 CFR 261.4(a)(24))
Code

06
07
08

Facility Code Description

HSM Generator transferring HSM off-site to a domestic reclamation facility: This code applies if
you generate and send hazardous secondary material for reclamation to an off-site domestic reclamation
facility.
Reclaimer receiving HSM from off-site: This code applies if you reclaim hazardous secondary material
received from an off-site domestic hazardous secondary material generator or other domestic facility.
Intermediate facility: This code applies if you receive hazardous secondary material from an off-site
domestic hazardous secondary material generator or another domestic facility and you store it for more
than ten days. This code does not apply if you generate or reclaim the hazardous secondary material.

Imports/Exports (40 CFR 261.4(a)(24) or (25))
Code

09
10
11

Facility Code Description

HSM Generator exporting HSM off-site to a foreign reclamation facility: This code applies if you
generate and export hazardous secondary material for reclamation to a foreign reclamation facility.
HSM Generator importing HSM from a foreign entity to send to another domestic reclamation
facility: This code applies if you import hazardous secondary material from a foreign entity and send the
material for reclamation to a domestic reclamation facility.
HSM Generator AND Reclaimer of imported HSM: This code applies if you import hazardous
secondary material from a foreign entity and reclaim the material at your facility.

43

HSM LAND-BASED UNIT CODES
A 2-digit code that best describes the land-based unit you use or will use to manage the hazardous
secondary material.

Code

Land-based Unit Code Description

NA

Do not use land-based units to manage hazardous secondary material.

SI

PL
OT

Use surface impoundment(s) to manage hazardous secondary material. A surface impoundment
is a natural topographic depression, man-made excavation or diked area formed primarily of
earthen materials (although it may be lined with man-made materials), which is designed to hold
an accumulation of liquid hazardous secondary materials or materials containing free liquids and
which is not an injection well.
Use pile(s) to manage hazardous secondary material. Pile means any non-containerized
accumulation of solid, nonflowing hazardous secondary material that is used for storage and is
not a containment building.
Use other land-based unit(s) to manage hazardous secondary material.

44

12/31/2014
OMB# 2050-0024; Expires ____________
SEND
COMPLETED
FORM TO:
The Appropriate
State or Regional
Office.
1.

Reason for
Submittal
MARK ALL
BOX(ES) THAT
APPLY

United States Environmental Protection Agency
RCRA SUBTITLE C SITE IDENTIFICATION FORM

Reason for Submittal:
 To provide an Initial Notification (first time submitting site identification information / to obtain an EPA ID number
for this location)
 To provide a Subsequent Notification (to update site identification information for this location)
 As a component of a First RCRA Hazardous Waste Part A Permit Application
 As a component of a Revised RCRA Hazardous Waste Part A Permit Application (Amendment #
)


As a component of the Hazardous Waste Report (If marked, see sub-bullet below)

 Site was a TSD facility and/or generator of >1,000 kg of hazardous waste, >1 kg of acute hazardous waste, or
>100 kg of acute hazardous waste spill cleanup in one or more months of the report year (or State equivalent
LQG regulations)
2.

Site EPA ID
Number

EPA ID Number

3.

Site Name

Name:

4.

Site Location
Information

Street Address:
City, Town, or Village:

County:

State:
5.

Site Land Type

6.

NAICS Code(s)
for the Site
(at least 5-digit
codes)

7.

Site Mailing
Address

8. Site Contact
Person

Country:

Private

County

District

Zip Code:

Federal

Tribal

A.

C.

B.

D.

Municipal

State

Other

Street or P.O. Box:
City, Town, or Village:
State:

Country:

First Name:

MI:

Zip Code:
Last:

Title:
Street or P.O. Box:
City, Town or Village:
State:

Country:

Zip Code:

Email:
Phone:
9.

Legal Owner
and Operator
of the Site

Ext.:

Fax:
Date Became
Owner:

A. Name of Site’s Legal Owner:
Owner Type:

Private

County

District

Federal

Tribal

Municipal

State

Other

State

Other

Street or P.O. Box:
City, Town, or Village:

Phone:

State:

Country:

Zip Code:
Date Became
Operator:

B. Name of Site’s Operator:
Operator
Type:

Private

County

District

EPA Form 8700-12, 8700-13 A/B, 8700-23 (Revised 12/2011)

Federal

Tribal

Municipal

Page 1 of

12/31/2014
OMB#: 2050-0024; Expires ____________

EPA ID Number

10. Type of Regulated Waste Activity (at your site)
Mark “Yes” or “No” for all current activities (as of the date submitting the form); complete any additional boxes as instructed.
A. Hazardous Waste Activities; Complete all parts 1-10.
Y

1. Generator of Hazardous Waste
If “Yes”, mark only one of the following – a, b, or c.

N

a. LQG:

b. SQG:
c. CESQG:

Generates, in any calendar month, 1,000 kg/mo
(2,200 lbs./mo.) or more of hazardous waste; or
Generates, in any calendar month, or
accumulates at any time, more than 1 kg/mo (2.2
lbs./mo) of acute hazardous waste; or
Generates, in any calendar month, or
accumulates at any time, more than 100 kg/mo
(220 lbs./mo) of acute hazardous spill cleanup
material.
100 to 1,000 kg/mo (220 – 2,200 lbs./mo) of nonacute hazardous waste.
Less than 100 kg/mo (220 lbs./mo) of non-acute
hazardous waste.

Y

N

5. Transporter of Hazardous Waste
If “Yes”, mark all that apply.
a. Transporter
b. Transfer Facility (at your site)

Y

N

6. Treater, Storer, or Disposer of
Hazardous Waste Note: A hazardous
waste Part B permit is required for these
activities.

Y

N

7. Recycler of Hazardous Waste

Y

N

8. Exempt Boiler and/or Industrial Furnace
If “Yes”, mark all that apply.
a. Small Quantity On-site Burner
Exemption

If “Yes” above, indicate other generator activities in 2-4.

b. Smelting, Melting, and Refining
Furnace Exemption

Y

N

2. Short-Term Generator (generate from a short-term or one-time
event and not from on-going processes). If “Yes”, provide an
explanation in the Comments section.

Y

N

3. United States Importer of Hazardous Waste

Y

N

9. Underground Injection Control

Y

N

4. Mixed Waste (hazardous and radioactive) Generator

Y

N

10. Receives Hazardous Waste from Offsite

B. Universal Waste Activities; Complete all parts 1-2.
Y

N

C. Used Oil Activities; Complete all parts 1-4.

Y
1. Large Quantity Handler of Universal Waste (you
accumulate 5,000 kg or more) [refer to your State
regulations to determine what is regulated]. Indicate
types of universal waste managed at your site. If “Yes”,
mark all that apply.
a. Batteries

Y

N

1. Used Oil Transporter
If “Yes”, mark all that apply.
a. Transporter
b. Transfer Facility (at your site)

N

b. Pesticides

2. Used Oil Processor and/or Re-refiner
If “Yes”, mark all that apply.
a. Processor

c. Mercury containing equipment

b. Re-refiner

d. Lamps
e. Other (specify)

Y

N

f. Other (specify)

Y

N

3. Off-Specification Used Oil Burner

g. Other (specify)

Y

N

4. Used Oil Fuel Marketer
If “Yes”, mark all that apply.

2. Destination Facility for Universal Waste
Note: A hazardous waste permit may be required for this
activity.

EPA Form 8700-12, 8700-13 A/B, 8700-23 (Revised 12/2011)

a. Marketer Who Directs Shipment of OffSpecification Used Oil to OffSpecification Used Oil Burner
b. Marketer Who First Claims the Used
Oil Meets the Specifications

Page 2 of

EPA ID Number
D.

Eligible Academic Entities with Laboratories—Notification for opting into or withdrawing from managing laboratory hazardous
wastes pursuant to 40 CFR Part 262 Subpart K


Y

12/31/2014
OMB#: 2050-0024; Expires ____________

N

You can ONLY Opt into Subpart K if:


you are at least one of the following: a college or university; a teaching hospital that is owned by or has a formal affiliation
agreement with a college or university; or a non-profit research institute that is owned by or has a formal affiliation agreement with
a college or university; AND



you have checked with your State to determine if 40 CFR Part 262 Subpart K is effective in your state
1. Opting into or currently operating under 40 CFR Part 262 Subpart K for the management of hazardous wastes in laboratories
See the item-by-item instructions for definitions of types of eligible academic entities. Mark all that apply:
a. College or University
b. Teaching Hospital that is owned by or has a formal written affiliation agreement with a college or university
c. Non-profit Institute that is owned by or has a formal written affiliation agreement with a college or university

Y

N

2. Withdrawing from 40 CFR Part 262 Subpart K for the management of hazardous wastes in laboratories

11. Description of Hazardous Waste
A.

Waste Codes for Federally Regulated Hazardous Wastes. Please list the waste codes of the Federal hazardous wastes handled at
your site. List them in the order they are presented in the regulations (e.g., D001, D003, F007, U112). Use an additional page if more
spaces are needed.

B.

Waste Codes for State-Regulated (i.e., non-Federal) Hazardous Wastes. Please list the waste codes of the State-Regulated
hazardous wastes handled at your site. List them in the order they are presented in the regulations. Use an additional page if more
spaces are needed.

EPA Form 8700-12, 8700-13 A/B, 8700-23 (Revised 12/2011)

Page 3 of

12/31/2014
OMB#: 2050-0024; Expires ____________

EPA ID Number
12. Notification of Hazardous Secondary Material (HSM) Activity
Y

N

Are you notifying under 40 CFR 260.42 that you will begin managing, are managing, or will stop managing hazardous
secondary material under 40 CFR 261.2(a)(2)(ii), 40 CFR 261.4(a)(23), (24), or (25)?
If “Yes”, you must fill out the Addendum to the Site Identification Form: Notification for Managing Hazardous Secondary
Material.

13.

Comments

14. Certification. I certify under penalty of law that this document and all attachments were prepared under my direction or supervision in
accordance with a system designed to assure that qualified personnel properly gather and evaluate the information submitted. Based
on my inquiry of the person or persons who manage the system, or those persons directly responsible for gathering the information, the
information submitted is, to the best of my knowledge and belief, true, accurate, and complete. I am aware that there are significant
penalties for submitting false information, including the possibility of fines and imprisonment for knowing violations. For the RCRA
Hazardous Waste Part A Permit Application, all owner(s) and operator(s) must sign (see 40 CFR 270.10(b) and 270.11).
Signature of legal owner, operator, or an
authorized representative

Name and Official Title (type or print)

EPA Form 8700-12, 8700-13 A/B, 8700-23 (Revised 12/2011)

Date Signed
(mm/dd/yyyy)

Page 4 of

12/31/2014
OMB#: 2050-0024; Expires ____________

EPA ID Number

ADDENDUM TO THE SITE IDENTIFICATION FORM:
NOTIFICATION OF HAZARDOUS SECONDARY MATERIAL ACTIVITY
ONLY fill out this form if:

1.



You are located in a State that allows you to manage excluded hazardous secondary material (HSM) under 40 CFR 261.2(a)(2)(ii),
261.4(a)(23), (24), or (25) (or state equivalent). See http://www.epa.gov/epawaste/hazard/dsw/statespf.htm for a list of eligible
states; AND



You are or will be managing excluded HSM in compliance with 40 CFR 261.2(a)(2)(ii), 261.4(a)(23), (24), or (25) (or state
equivalent) or you have stopped managing excluded HSM in compliance with the exclusion(s) and do not expect to manage any
amount of excluded HSM under the exclusion(s) for at least one year. Do not include any information regarding your hazardous
waste activities in this section.

Indicate reason for notification. Include dates where requested.
Facility will begin managing excluded HSM as of

(mm/dd/yyyy).

Facility is still managing excluded HSM/re-notifying as required by March 1 of each even-numbered year.
Facility has stopped managing excluded HSM as of
2.

Description of excluded HSM activity. Please list the appropriate codes and quantities in short tons to describe your excluded HSM
activity ONLY (do not include any information regarding your hazardous wastes). Use additional pages if more space is needed.

a. Facility code
(answer using
codes listed in the
Code List section of
the instructions)

3.

Y

(mm/dd/yyyy) and is notifying as required.

b. Waste code(s) for HSM

c. Estimated short
tons of excluded HSM
to be managed
annually

d. Actual short tons
of excluded HSM
that was managed
during the most
recent oddnumbered year

e. Land-based unit
code (answer using
codes listed in the
Code List section of
the instructions)

Facility has financial assurance pursuant to 40 CFR 261.4(a)(24)(vi). (Financial assurance is required for reclaimers and
intermediate facilities managing excluded HSM under 40 CFR 261.4(a)(24) and (25))
N

Does this facility have financial assurance pursuant to 40 CFR 261.4(a)(24)(vi)?

EPA Form 8700-12, 8700-13 A/B, 8700-23 (Revised 12/2011)

Addendum Page

of

This page intentionally left blank


File Typeapplication/pdf
File TitleNotification of RCRA Subtitle C Activity: Instructions and Form: EPA Form 8700-12
SubjectBooklet containing the RCRA Subtitle C Site Identification Form. Includes instructions, reference information, and code lists.
AuthorUS EPA, OSWER, Office of Resource Conservation and Recovery
File Modified2012-07-09
File Created2012-07-09

© 2024 OMB.report | Privacy Policy