In accordance
with 5 CFR 1320, the information collection is approved for three
years.
Inventory as of this Action
Requested
Previously Approved
11/30/2018
36 Months From Approved
11/30/2015
290
0
2,030
64,316
0
33,108
8,314
0
8,314
The National Emission Standards for
Hazardous Air Pollutants (NESHAP) for Plating and Polishing Area
Sources regulations apply to respondents that are plating and
polishing facilities engaged in any of the following processes:
non-chromium electroplating; electroless or non-electrolytic
plating; other non-electrolytic metal coating processes such as
chromate conversion coating, nickel acetate sealing, sodium
dichromate sealing, manganese phosphate coating, thermal spraying;
dry mechanical polishing of finished metals and formed products
after plating or thermal spraying, electroforming, and
electro-polishing. New facilities include those that commenced
construction or reconstruction after the date of proposal. The
required annual reports are used to determine periods of excess
emissions, identify problems at the facility, verify
operation/maintenance procedures and for compliance determinations.
This information is also collected to assure compliance with 40 CFR
Part 63, Subpart WWWWWW.
There is an increase of 31,208
hours in the total estimated respondent burden compared with the
ICR currently approved by OMB. The change in burden and cost
estimates occurred as a result of updating the burden tables to
accurately reflect the reporting and recordkeeping requirements of
the rule.
On behalf of this Federal agency, I certify that
the collection of information encompassed by this request complies
with 5 CFR 1320.9 and the related provisions of 5 CFR
1320.8(b)(3).
The following is a summary of the topics, regarding
the proposed collection of information, that the certification
covers:
(i) Why the information is being collected;
(ii) Use of information;
(iii) Burden estimate;
(iv) Nature of response (voluntary, required for a
benefit, or mandatory);
(v) Nature and extent of confidentiality; and
(vi) Need to display currently valid OMB control
number;
If you are unable to certify compliance with any of
these provisions, identify the item by leaving the box unchecked
and explain the reason in the Supporting Statement.