ASM Supporting Statement B

ASM Supporting Statement B.doc

Annual Survey of Manufactures

OMB: 0607-0449

Document [doc]
Download: doc | pdf

5



Supporting Statement – Part B

U.S. Department of Commerce

U.S. Census Bureau

Annual Survey of Manufactures (ASM)

OMB Control No. 0607-0449




B. Collection of Information Employing Statistical Methods


1. Description of Universe and Respondent Selection


The ASM statistics are based on a survey that includes both mail and nonmail components. The mail portion of the survey consists of a probability sample that will be redesigned for the 2014 ASM using a methodology similar to the one that was used for the 2009 ASM. However, the industry strata for the 2014 ASM sample will be based on the 2012 North American Industry Classification System (NAICS), which combines many of the six-digit codes in the Manufacturing Sector. For the 2009 ASM, approximately 51,000 manufacturing establishments were selected from a sample frame of approximately 117,000 establishments. The sample frame contained all manufacturing establishments of multiunit companies (companies with operations at more than one location) and the largest single-location manufacturing companies within each industry. We expect the number of establishments in the 2014 ASM sample to be about the same as the number in the 2009 ASM sample. The 2009 ASM nonmail component contained approximately 211,000 small and medium-sized single-location companies. No data are directly collected from companies in the nonmail component. For the nonmail companies, data are imputed based on models that incorporate the administrative records of the Internal Revenue Service (IRS), the Social Security Administration (SSA), and the Bureau of Labor Statistics (BLS). Although the nonmail companies account for nearly two thirds of the population, they only account for less than 7 percent of the total manufacturing output.


The unit response rate in the ASM is typically in the 70-75% range. Due to the skewness in the population, the respondents typically account for over 80% of the value of shipments in manufacturing.


2. Procedures for Collecting Information


a. Description of Reporting Forms


We will mail reporting forms to approximately 51,000 manufacturing establishments. They will receive a MA-10000(L) (long version) or a

MA-10000(S) (short version).

(1) Large firms - We mail the long version MA-10000(L) of the questionnaire to approximately 48,000 establishments. The establishments are large and represent a significant proportion of the respective class of products produced at the U.S. level.


(2) Small firms - We will send MA-10000(S) short forms to small single-establishment companies selected for the sample. We expect to mail approximately 3,000 short forms.

The size of the ASM mailing panel breakdown, therefore, is as follows:


(1) Long Form MA-10000(L) 48,000

(2) Short Form MA-10000(S) 3,000

Total 51,000


(3) Ownership or Control Flier (Attachment D) - For those single-establishments firms selected in the ASM sample, an ownership or control flier will be inserted in the mail out package. We expect to mail approximately 17,000 forms.

b. Matching to BLS Establishment List

Incomplete industry codes can cause potentially serious errors in our coverage of new producers and in our ability to perform accurate editing and imputation. Although the SSA requests industry classification in the original application for the EI number, frequently only a 3- or 4-digit code can be assigned for a large number of the new businesses. This amounts to about 20,000 manufacturing establishments annually. In addition, a large number of newly active establishments are received from the IRS without industry classification. Classification information is requested from the BLS for both types of cases.

c. Sampling Methodology


The 2014 ASM sample will be selected from the Manufacturing Sector of the 2012 Economic Census. The sample will be supplemented annually to include new establishments in the Manufacturing Sector. This sample will be used through reference year 2018. Below is an overview of the sample design.


The universe will first be partitioned into mail and nonmail strata. Within each of the 364 NAICS industries, small and medium-sized single-location companies will be identified and defined as the nonmail component. Establishments comprising the remaining portion, including all establishments of multi-location companies, will be defined as the sample frame.


On the sample frame, establishments that meet specified criteria will be selected in the sample with certainty. These criteria may include characteristics of particular establishments that responded to the 2010 Management and Organizational Practices Survey (MOPS), which was a supplement to the 2010 ASM sample.


The sampling strategy will be to select an independent sample within each of the 364 NAICS industries. This will allow optimization of the probabilities of selection within each industry, which will improve the representativeness and reliability of the survey estimates. Within each industry, each establishment will initially be assigned multiple probabilities. These probabilities will be based on the establishment’s relative importance within the industry that it is classified and the set of product classes that it produces; and, the target reliability constraints defined by the survey manager. For example, an establishment that has activity in three product classes will initially be assigned a total of four probabilities (one would be industry-based and the other three would be product class based). For sample selection purposes, the establishment’s maximum probability will be used. The use of the maximum probability ensures that target reliability constraints will be satisfied.


d. Estimating Procedures


A primary objective of the ASM is to estimate year-to-year change between the censuses. The variances of estimated changes are always reduced when the sample overlap is high between both periods and the year-to-year correlations are positive. Since the ASM sample is selected and maintained for a period of five years and the year-to-year correlations are high for most ASM data variables, an estimator that takes advantage of both the constancy of sample and the positive correlations is highly desirable. For the ASM this is achieved via the use of the “difference estimator.” Essentially, an estimate of the “difference” between the current year and the census year is derived from the sample and added to or subtracted from the corresponding census value.


For a given sample size, the difference estimator generates more reliable estimates than most estimators of totals. It also offers the attractive feature that estimates for different subgroups are additive, ensuring that estimates are arithmetically consistent.


The formula for the difference estimator is as follows:


Y"cy=Y'cy+ (Y12 - Y'12) + Icy


Where Y"cy is the published estimate for the current year. Y'cy is the linear estimate obtained by multiplying each mail sample establishment's current year data by the corresponding establishment weight.


Icy is the estimate obtained from the use of administrative records and industry averages for establishments in the nonmail portion of the universe.


Y12 is the 2012 census value from the sampling frame.


Y'12 is the linear estimate of Y12 from the sample selected from the sampling frame.


For selected variables with poor year-to-year correlations, estimates of total are generated as follows:


Y"cy = Y'cy + Icy



3. Methods to Maximize Response


a. Follow-up Procedures


We follow up delinquent companies by mail reminder (four separate mailings, approximately 1 month apart). We call larger delinquent companies at the time of our processing closeout prior to the tabulation review stage. In addition, the analyst staff contacts individual establishments of these larger companies as part of the tabulation review stage.


b. Estimating for Missing Data


The procedures for handling missing data essentially are the same as the prior years. For single-establishment companies that do not respond, we obtain employment and payroll data from the IRS. We then estimate the other data items for the nonrespondent, using a combination of the prior year establishment operational relationship and industry averages.


For establishments of multiunit companies that do not respond, we obtain operational status information from the Company Organization Survey to identify the establishments that actually are in business and, therefore, candidates for imputation. We then estimate the detailed items for the nonrespondent establishments using a combination of the prior year establishment operational relationships, industry averages, and changes in industry levels developed from data supplied by the Census Bureau's M3 survey (inventories) and the BLS (employment and payroll).

c. Reliability


The estimates developed from the survey are apt to differ somewhat from the results of a census covering all companies in the sampled lists conducted under essentially the same conditions as the sample survey. We provide estimates of the magnitude of the sampling errors -- the differences between the estimates obtained and the results theoretically obtained from a comparable complete coverage census -- by the standard errors of the estimates included in the publications. For value added by manufacturers, the standard error of the estimate was one percent of the estimate at the total manufacturing level for 2011. At the 3-digit subsector levels, the standard error of estimate for the majority of the subsectors was two percent or less for 2011.


4. Testing of Procedures


We conduct studies designed to examine methodological and processing issues. Earlier studies have resulted in the use of short forms for smaller companies and the use of administrative information for imputation purposes.

5. Contacts for Statistical Aspects and Data Collection


Mr. Julius Smith, Jr., Assistant Division Chief for Census and Related Programs of the Manufacturing and Construction Division, serves as consultant on the collection, analysis, and the dissemination of the ASM data. He can be reached on (301) 763-7662.


Mrs. Amy Newman Smith, Assistant Division Chief for Research and Methodology of the Manufacturing and Construction Division, serves as consultant on the statistical aspects of the ASM. She can be reached on (301) 763-6595.




Attachments:

A. List of Consultants

B. 2014 Cover Letters

C. 2014 Report Forms and Instructions

D. Ownership or Control Flier

E. Electronic Instrument


File Typeapplication/msword
File TitleSupporting Statement
Authorallen001
Last Modified ByJeannette D Greene-Bess
File Modified2015-03-04
File Created2015-03-04

© 2024 OMB.report | Privacy Policy