Attachment 3 - State and Local Government Sample Design for the NCS

Attachment 3 - State and Local Government Sample Dsign for the National Compensation Survey.pdf

Occupational Requirements Survey (ORS)

Attachment 3 - State and Local Government Sample Design for the NCS

OMB: 1220-0188

Document [pdf]
Download: pdf | pdf
Section on Survey Research Methods – JSM 2012

State and Local Government Sample Design
for the National Compensation Survey October 2012
Gwyn R. Ferguson1, Chester H. Ponikowski1, Erin McNulty1,
and Joan L. Coleman1

1

U.S. Bureau of Labor Statistics, 2 Massachusetts Ave., NE, Room 3160,
Washington, DC 20212

Abstract

The National Compensation Survey is conducted by the Bureau of Labor Statistics to
compute measures of the pay and benefits for America's workers. Since the early 1990's,
the survey design used a three-stage sample design to select samples of areas,
establishments, and jobs for which wage and benefit data are collected periodically over a
five-year rotation. In 2011, we presented a new two-stage sample design for private
industry establishments that introduces a three-year rotation of establishment samples.
This new design is a national design without any area sampling under which we select
samples of establishments and jobs in the two stages of selection. This paper will explore
design alternatives for selection of establishments in the State and local government
sectors of the economy that are more consistent with the new private industry design.
Design topics that are being studied and will be presented include sample rotation,
allocation, sample frame preparation, establishment selection, and sample initiation
scheduling. Recommendations for the design to be used when selecting future public
sector samples will be presented.

Key Words: survey design, sample allocation, respondent burden, sample rotation
1. Introduction
The National Compensation Survey (NCS) is an establishment-based survey conducted
by the U.S. Bureau of Labor Statistics (BLS). Over the last several decades, the NCS has
undergone many changes leading up to the survey design currently in operation which
has been used by NCS since the mid-1990’s. In recent years, several potential changes to
this design have been explored due to budget cuts, known issues with the current design,
and an on-going effort to make the survey more efficient. In February 2011, the Bureau
of Labor Statistics began implementing a change to the Locality Pay Survey (LPS)
component of NCS which is used to produce annual occupational earnings data for the
nation, each Census Division, and selected geographic areas. When this change is
implemented, these occupational earnings estimates will be produced using a modeling
technique that combines the national data from the NCS with the locality data from the
Occupational Employment Statistics (OES) survey (BLS Handbook of Methods Chapter
3). All other data estimates computed using NCS data, including the Employment Cost
Index, Employer Costs for Employee Compensation, and various measures of access and
participation in employer provided benefits will continue to be produced using the data
collected by NCS. With the elimination of the need to produce locality estimates directly
from the NCS sample, the remaining NCS outputs can follow a more efficient national

4166

Section on Survey Research Methods – JSM 2012

based sample design. At the same time, many of the sample design issues associated with
the current design will be addressed by the redesign of the NCS current sample design.
The planned changes to the NCS sample design are considered major revisions to a
Federal Government survey and are subject to the revision guidelines in the Office of
Management and Budget Standards and Guidelines (OMB Standards 2006) and further
described in the OMB Memorandum on "Guidance on Agency Survey and Statistical
Information Collections" (OMB January 2006). Section 1 of these standards is applicable
to the work on a new survey design for NCS. With this redesign and the research
supporting the recommended changes, NCS has attempted to address all the concerns in
these standards.
The current sample design issues and our plans for evaluating them were presented in the
2010 JSM paper "Evaluating Sample Design Issues in the National Compensation
Survey" (Ferguson et al, JSM, 2010). A second paper, "Update on the Evaluation of
Sample Design Issues in the National Compensation Survey" (Ferguson et al, JSM 2011)
provided an update on the previous work and included several recommended changes to
the sample design for the private sector of the economy. This paper presents the research
and proposed changes to the sample design for the State and local government, or public,
sectors of the economy. Section 2 provides an overview of the current NCS sample
design for the State and local government sectors of the U.S. economy followed by an
overview of the proposed public sector NCS sample redesign in Section 3. Section 4
describes our proposed recommendations for the new public sector sample design,
describes our plans for transitioning from the current design to the new design,
summarizes the research and analysis efforts that were done to develop the
recommendations, and highlights issues that still need to be resolved. Finally, Section 5
provides a summary and conclusion of the redesign efforts for State and local
government establishments.

2. Overview of the Current NCS State and Local Government Sample
Design
The NCS studies workers in private industry establishments, and in State and local
government, in the 50 States and the District of Columbia. Establishments with one or
more workers are included in the survey. The BLS Quarterly Census of Employment and
Wages (QCEW) serves as the sampling frame for the NCS survey. The QCEW is created
from State Unemployment Insurance (UI) files of establishments, which are obtained
through the cooperation of the individual State agencies (BLS Handbook of Methods,
Chapter 5).
Through 2012, the NCS sample consists of five rotating replacement sample panels for
private industry establishments, an additional sample panel for State and local
government entities, and an additional panel for private industry firms in the aircraft
manufacturing industry. Each of the sample panels is in the sample for at least five years
before it is replaced by a new sample panel selected annually from the most current
frame. Beginning in 2012, NCS began transitioning to a three year rotation for private
industry establishments as described in the 2011 JSM paper by Ferguson et al. The
remainder of this paper will focus on the design and rotation strategy for the sample panel
for State and local government entities.

4167

Section on Survey Research Methods – JSM 2012

The current NCS State and local government sample was selected using a three stage
stratified design with probability proportionate to employment size (PPS) sampling at
each stage. The first stage of sample selection is a probability sample of areas; the second
stage is a probability sample of establishments within sampled areas; and the third stage
is a probability sample of jobs within sampled areas and establishments.
The first stage of the NCS sample occurs at the national level across geographic areas.
These Primary Sampling Units (PSUs) are based on the 2003 Office of Management and
Budget (OMB) area definitions. Under the OMB definitions there are three types of
statistical areas. These area types are defined as Metropolitan, Micropolitan, and
Combined Statistical Areas. Combined Statistical Areas (CSAs) are defined as a
combination of adjacent Metropolitan and Micropolitan areas that meet certain conditions
set by OMB. A number of counties exist outside of these areas and are referred to as
Outside Core Based Statistical Areas (CBSA). For selection purposes, PSUs in these
outside CBSA’s consist of one or more adjacent counties. Where possible the counties
were organized into clusters to create heterogeneous primary sampling units.
In 2004, a new area sample was selected for the NCS. This sample contained 152 areas.
In this sample 57 areas were selected with certainty, where certainty areas are defined as
having employment greater than 80 percent of the final sampling interval, which is
obtained through an iterative process. The remaining areas consisted of 60 non-certainty
metropolitan areas, 22 non-certainty micropolitan areas, and 13 non-certainty outside
CBSA county clusters.
The second stage of this design occurs at the establishment level within each selected
area. For State and local government entities, a sample of establishments is selected
approximately once every ten years, shortly after the selection of a new sample of areas.
The State and local government establishments on the QCEW sample frame within
sampled geographic areas are refined (see section 4.3) prior to establishment sample
selection to help ensure that the frame represents establishments as defined by NCS.
Refined establishments in the sampling frame are stratified by ownership (State versus
local) and industry. Industries for the NCS are defined using the North American Industry
Classification System (NAICS). Within each of the ownership by industry strata, NCS
employs PPS systematic sampling with frame employment as the measure of size (MOS).
To ensure that no unit has a probability of selection greater than one, we identify all units
that would be selected with certainty before the sampling process, designate them as part
of the sample, and set their sampling weights to one. During the selection process,
approximately one-half of the establishments, the index portion, are sub-sampled and
flagged to support the ECI, ECEC, and NCS Benefits products as well as the NCS wage
products. The remaining establishments, the wage-only portion, were flagged to support
the NCS wage products only, although those units are no longer being collected (see
Ferguson et al 2010). After the sample of establishments is selected, it is used for the
third stage of the sampling process.
The third stage of this design occurs at the occupational level within each selected
establishment. A sample of jobs is drawn from each of these establishments using PPS
systematic sampling where the number of employees in the job is the measure of size. To
ensure consistency across all establishments, the Standard Occupational Classification
(SOC) manual is used to classify the selected jobs into occupations based upon the
assigned duties. After this selection and classification we create our smallest aggregate

4168

Section on Survey Research Methods – JSM 2012

unit known as a quote, which is a distinct combination of time or incentive pay, work
level, collective bargaining status, full-time or part-time status, and establishment defined
occupation.
Establishments in each sample are initiated over a fifteen month time period. During the
initiation process, respondents are identified, jobs are selected, and respondents provide
BLS with initial information about each selected job quote. All establishments are asked
to provide BLS with employer provided wages and salaries for all workers in each
selected job quote. Establishments in the index portion of the sample are also asked to
provide the cost of each employer provided benefit, a description of each benefit offered
to the employees in each selected job, and benefit access and provisions data such as the
number of employees who are offered the benefit, the number who partake of the benefit,
and detailed descriptions of the benefit.
State and local government respondents are asked to provide periodic updates for the
initiated jobs for the next ten years. Index respondents are asked to provide quarterly
updates while wage respondents are asked to update their data annually. However, due to
the implementation of an alternative to the Locality Pay Program, NCS stopped asking
wage respondents to update their data in early 2011. At this time, only the index
respondents are being asked to provide updates to their NCS data. At the end of the ten
year update period, NCS thanks the respondents for supporting our survey and ceases to
ask for updated data unless the respondent has been selected in the next public sector
sample.

3. Overview of the Proposed New NCS Sample Design
The recommended sample design for the State and local government sector is similar to
the new design for private industry. As has been implemented for private industry
samples, the redesigned State and local government sample will have two stages of
sampling instead of the current three stages. In the first stage, a sample of establishments
will be selected and in the second stage, a sample of jobs will be selected from sampled
establishments. As with the current design, a new public sector sample will be selected
approximately once every 10 years. State and local governments are sampled less often
than private industry because of the traditionally high response rates and slower change
in occupational mix for this sector of the economy. All sampled establishments will be
used to support the production of all NCS product lines.
The NCS will continue to use the most recent data available on the BLS QCEW
(Quarterly Census of Employment and Wages) database to generate each establishment
frame. For allocation and selection purposes, the NCS will use a measure of size (MOS)
based on the total employment from the frame and will allocate sample sizes to each
sampling cell in proportion to the total measure of size in the cell. This will ensure that
the NCS public sector sample contains the same proportions of industry sample as the
frame employment. The very large establishments will continue to be selected with
certainty.
All sample units will be assigned to one of four collection panels for initiation. Once a
sample of establishments is selected and collection panels have been assigned, BLS
Regional Office employees will review and refine the sample before collection begins.
As part of this refinement process, establishments may be moved from one collection

4169

Section on Survey Research Methods – JSM 2012

panel to another to coordinate initiation in government entities with more than one
establishment and/or to reduce travel costs associated with initiation efforts.
Establishments will be initiated over a fifteen month period with one collection panel
required to be completed every three months. Once initiated, a unit will then be updated
quarterly until it rotates out of the design, which will be approximately ten years after the
entire sample is initiated. No newly initiated establishment will be used in the NCS
estimates until the entire sample has been initiated and updated for a common/base
quarter. During this base quarter, data for the newly initiated sample as well as the prior
sample will be updated. After the base quarter is completed, the entire sample will be
added to the data available for estimation while the old public sector sample in estimation
will be dropped from further updates and inclusion in the estimates.
Although NCS is implementing a new sample design, we are not making any changes to
the data collection processes as a result of the new design. The data elements to be
collected, the timing of the collection processes, and the collection methods and modes
will remain the same as they are under the current design and the newly implemented
private sector sample design unless they are changed for other business reasons. Thus, we
expect that the State and local government respondent burden associated with our survey
will not change.

4. Proposed NCS Sample Design – Recommendation, Research,
Transition, and Remaining Efforts
This section of the paper will provide more detail about the various components of the
recommended new sample design for State and local government entities, summarize the
approach used to research each component of the design, describe the research findings
and analysis, and identify any remaining issues and research needed to complete the
design.
4.1 Design Summary and Transition
The NCS plans to move forward with this new national based sample design for State and
local government establishments once the first three year rotation of private industry
samples has been initiated under the new design. Collection of the first public sector
sample under the national based design is scheduled to begin in the spring of 2015. After
a fifteen month initiation period and one quarter for base period wage and benefit cost
collection, this sample will be used in NCS estimates for the first time for December
2016 estimates to fully complete the transition from the old area-based design to the new
national design for all NCS in-scope sectors of the economy. During the time period that
a new State and local government sample is sampled and initiated, the existing private
sample will not be replaced.
4.2 Establishment Sample Frame
Sample frames will be constructed from the BLS QCEW database using the most recent
quarter available. The frames for State and local government establishments must include
all establishments from all 50 States and the District of Columbia for all in-scope
industries. The in-scope industries for NCS are not changing in the new sample design
and are listed in Appendix 1 for public industry. All establishments in the QCEW
database which are coded as belonging to a State government or local government in
these in-scope industries will be in-scope for establishment sampling.

4170

Section on Survey Research Methods – JSM 2012

4.3 Establishment Sample Frame Refinement and Preparation
For the State and local government sampling, the NCS has performed a frame refinement
process in the past. The purpose of this refinement process was to ensure that the frame
establishments meet the NCS establishment definition. NCS defines an establishment to
be an agency or entity such as a school district, college, university, hospital, nursing
home, administrative body, court, police department, fire department, health or social
service operation, highway maintenance operation, urban transit operation, or other
governmental unit. It provides services under the authority of a specific State or local
government organization within a defined geographic area or jurisdiction and within
defined publication levels by industry.
In 2005, State and local government refinement was conducted for approximately
102,000 public sector establishments in the 152 selected geographic areas (see Springer
2007). During the refinement, some individual establishments were clustered into a single
unit for sampling while other establishments were split into multiple sampling units.
However, there were more clusters formed than splits made and the refined frame
contained about 44,000 establishments for sampling purposes. This refinement was very
labor intensive and took about 2.7 person years of effort to complete over a three month
time period. Once initiation of the sample was completed, we conducted an analysis of
the results of the frame refinement and the impact of that refinement on the initiation
process. In general, the information gained during refinement, particularly among the
large government systems, improved field staff's familiarity with the reporting units and
sample unit identification improved as a result of the refinement.
As NCS moves to a national design, the size of the establishment frame will grow since it
will not be constrained to just the sampled geographic areas. In 2011, the public sector
frame of State and local government establishments contained approximately 230,000
establishments across the entire country. If refinement is conducted for this set of
establishments using a similar process to that used in 2005, we anticipate that it will take
about 6.1 person years of effort to complete the refinement – a resource level that would
be difficult to support with current NCS employees. Although this is a large level of
effort, there is some concern that response rates could drop without doing at least a partial
refinement of the State and local government establishments on the QCEW sample
frame. We plan to conduct research to identify the frequency of refinement changes made
by ownership, geographic area, and industry to see if it would be possible to conduct a
partial frame refinement to increase the chances of good response while minimizing the
problems that could be caused by not doing any frame refinement.
To prepare the frame for sampling, several key variables are added to the data extracted
from the QCEW database. This includes codes to create geographic area strata, aggregate
industry strata, detailed industry categories, sampling cells, and an adjusted employment
value to be used as the measure of size for each establishment.
First, every establishment must be assigned a geographic area code used to stratify the
sample for allocation and selection. By stratifying the sample into these geographic areas,
NCS will be able to continue to support publication of local area employment cost level
and index data for these large metropolitan areas. As with private industry sampling,
NCS will use 24 geographic areas, one for each of the 15 largest metropolitan areas by
employment and one for the remainder of each Census Division as shown in Appendix 2.

4171

Section on Survey Research Methods – JSM 2012

The current list of largest metropolitan areas was developed using employment data from
the 2000 Census.
Second, each establishment is assigned to one of five aggregate industry strata and one of
ten detailed industry categories based on its NAICS code on the QCEW database. At the
aggregate industry level, State and local government establishments will be combined for
a total of five. This is different than the current design where State government
establishments are separated from local government and put into their own industry
strata. NCS will continue to use the current ten detailed industries that are used for both
State and local government samples. Nine of the current detailed industries are mapped to
one and only one of the aggregate industries. However, the tenth detailed industry
currently used in sampling, Other Service Providing, has been split into two subindustries – one of which is mapped to Financial Activities and the other of which
remains in Service Providing. See Appendix 1 for a list of these aggregate industries, the
detailed industries, and their associated NAICS codes. The aggregate industries being
used for allocation and sample selection were created by analyzing the levels of
aggregation in the various NCS publication lines and correspond to the aggregate
industries used for NCS private industry sampling.
Next, each establishment is assigned to a sampling cell. The sampling cells are created as
unique combinations of geographic area strata and aggregate industry strata. So there are
a total of 120 possible sampling cells – one for each combination of the 24 geographic
areas and the five detailed industries. Each establishment is assigned to one and only one
of the sampling cells. Additional research has been conducted to look at establishments
with zero employment and the results of that study are available in a separate paper,
"Evaluation of Alternative Measures of Size for Sampling of Establishments in the NCS"
(Rhein et al, JSM 2012).
Finally, each establishment on the frame will be assigned an adjusted employment. For
most establishments, the adjusted employment will be set equal to the third month's
employment for the most recent quarter of QCEW data. However, if this monthly
employment is equal to zero, the adjusted employment will be set equal to 1. In this
manner, all in-scope establishments from the QCEW will be given a chance of selection
even those births or seasonal establishments with no employees in the designated month.
4.4 Establishment Sample Allocation and Certainty Establishment Identification
For State and local government samples, NCS will continue to conduct a sample
allocation process and identify certainty establishments each time an establishment
sample is selected using an overall sample size that is aligned with the current budget. If
budget or resource levels change significantly between the selection of public sector
samples, NCS will need to re-evaluate the timing and/or sample size for the next public
sector sample. If budget situations change too much before the next schedule, NCS could
also consider adjusting the timing of the next sample and/or supplementing the sample
for this segment of the economy or subselecting the original sample.
The sample allocation process starts with a total budgeted sample size. First, one
establishment is allocated to each of the 120 sampling cells. The remaining total sample
size is then allocated to the five aggregate industry strata in proportion to the total
employment within each industry. Finally, each of the five aggregate stratum allocations
is divided among the 24 geographic areas in proportion to the total employment of the
frame units in the areas, resulting in 120 area-industry cell allocations. An ordered

4172

Section on Survey Research Methods – JSM 2012

rounding technique will be used to distribute the decimal portion of the allocations at
each stage of this process. Under this technique, the decimal portions of the allocations
are summed across all cells to obtain the remainder, R, that should be distributed to the
cells. The allocations are then ordered by the decimal portion of the allocation in
descending order and the first R cells are rounded up while the other cells are rounded
down. This technique ensures that the total integer allocation is always equal to the
desired sample size.
Certainty units are identified using the initial cell allocations and the establishment MOS.
When an establishment MOS is greater than the total employment in the cell divided by
the initial cell allocation for the cell, the establishment is flagged as a certainty unit and
the remaining cell allocation is reduced by the number of certainty selections. This
identification process is repeated until no more certainty units exist in any cell. Each
initial area-industry cell allocation is then reduced by the number of certainty units in the
cell to create 120 non-certainty area-industry cell allocations.
Although this approach has been tested and the NCS is satisfied with the outcome, there
are still other approaches that could be researched as they may result in an even more
efficient approach. Some other options include creating separate sampling cells for State
government and local government, using the ten detailed industries for allocation and
sampling instead of the five aggregate industries, and adjusting the measures of size in
manners similar to the process used for private industry sampling. In addition, we plan to
explore other allocation options that employ variances of our estimates and prior response
rates instead of or in addition to our current proportional allocation.
4.5 Establishment Sample Selection
Under the proposed new design, NCS will select an independent non-certainty sample of
State and local government establishments within each of the five aggregate industry and
24 geographic area sampling cells. Within each of the sampling cells, units will be sorted
by State vs. local government ownership, detailed (10) industry, MOS, and establishment
identification number. The selection process will follow a systematic Probability
Proportionate to Size (PPS) approach where the measure of size is the adjusted
employment value from the frame. The certainty units identified in the previous step will
be added to the non-certainty sample to form the entire establishment sample.
Sample weights will be assigned to each of the selected non-certainty establishments in
the sample to represent the non-certainty portion of the frame. Units selected as certainty
will be self-representing and will carry a sample weight of one. The sample weight for
the non-certainty units will be the inverse of the probability of selection, or the sampling
interval for the sampling cell (area by aggregate industry) divided by the MOS for the
sampled unit.
This sample design was tested using sample simulations in which we obtained a complete
sample frame from the second quarter of 2011, assigned measures of size, executed the
allocation process, and selected certainty establishments. We then selected 100 noncertainty samples and evaluated the resulting samples to ensure that the total weighted
employment for the samples matched the frame employment and that the desired sample
sizes were obtained. As described later in this paper, these simulated samples also helped
us analyze collection resources needed, response rates, and publication levels under the
new design.

4173

Section on Survey Research Methods – JSM 2012

4.6 Initiation Collection Panel Assignment
All sampled units will be assigned to one of four collection panels for initiation. The units
will be assigned such that there is equal distribution across all four collection panels
within Regional Offices, geographic areas and industries. Before the sample files are
finalized, Regional Office staff will review the initial panel assignments and will have the
opportunity to move establishments from one panel to another to better coordinate the
collection efforts. This process is important especially when multiple locations of a
government entity have been sampled or when the sample only contains a few units in a
remote geographic area. However, the regions will be instructed to move units in a way
that results in a relatively equal distribution of establishments across each of the four
initiation panels. National Office staff will review the panel change requests to ensure
that the sample distributions are still relatively even.
Since we will continue to use our current processes, no detailed analysis or research was
conducted on how to assign initiation panels. As is currently done, special initiation
procedures are followed for establishments with seasonal employment to ensure that the
seasonal workers are given a chance of inclusion in the sample and are reflected in the
NCS sample, regardless of when the initiation occurs. Thus, it does not matter which
panel is assigned to any particular establishment in the sample.
Extensive analysis was done to determine how many field staff will be needed to
complete the initiation efforts each quarter during the year when public sector samples
are initiated. While conducting the allocation and certainty identification processes, we
also researched the selection of the non-certainty establishments. In addition to the
analysis that was done for allocation validation, we computed average sample sizes by
BLS regional office areas for sample allocations across all the simulated samples. These
average sample sizes were used to analyze BLS data collection resource needs by
regional office once the new design is fully implemented. Additionally, we also
compared the expected sample sizes for the public sector to those that we expect to see in
the private sector. As shown below in Table 1, the distribution of sample sizes is similar
between the two sectors of the economy.

4174

Section on Survey Research Methods – JSM 2012

Despite the small differences, a 2% difference could result in a full person’s effort to
initiate a government sample. Government units typically take almost twice as long to
initiate as private establishments. Given this slight concern, our Office of Field
Operations staff is currently evaluating the combined public and private data carefully to
ensure that the staffing levels in each region will be appropriate to collect and process the
data for both the public and private sector samples when the new public sector sample is
fielded in the spring of 2015.
4.7 Initiation, Data Updates, Response Rates, Estimation, and Publication
Under the current NCS design, some establishments are flagged for wage only collection,
while others are flagged for wage and benefit collection. Under the proposed new design,
wage and benefit data will be collected from the entire sample. NCS will continue all
collection activities under existing on-going processes and procedures. For all NCS
outputs except the occupational earnings data, NCS will use the current estimation
processes and procedures and will attempt to publish all levels of detail currently
included in our publications. As described at the beginning of this paper, occupational
earnings data by worker characteristics will be estimated using a modeling technique that
combines earnings data from the OES with worker characteristics from the NCS. The
specific modeling technique is still being finalized and will be described in a future
paper.
As the new design rotates into estimation, NCS will be generating estimates and
computing variances using a mix of samples selected from the old area-based design and
the new national design. This will add some complexity to the estimation processes, and
may cause some short-term loss of publishability due to the mix of sample types.
To determine the effect of the new design on the expected response rates for State and
local government samples, we computed response rates for the most recent NCS public
sector sample and applied those rates to the simulated samples obtained during the
allocation research. We used response rates computed by establishment size class and
detailed industry grouping for the initial analysis. We then did an analysis by looking at
response rates by Census divisions. Table 2 below shows that, although there is some
variation at the industry level, the overall response rates for our samples should not
change with the new design.

4175

Section on Survey Research Methods – JSM 2012

Table 2: Unweighted Response Rates - Current & Projected
Expected Sample Sizes
Under Proposed
Design
Sample
Size

Industry

% Dist

Sample Sizes and Response Rates for Recent Sample Under Current
Design
Estab
Count

% Dist

Viable
Estabs

Viable
Rate

Usable
Estabs

Usable
Rate

Projected Results under Proposed Design

Viable
Estabs

Viable
Rate

Usable
Estabs

Usable
Rate

Goods Producing

39

2.4%

18

1.1%

17

94.4%

16

94.1%

36

92.3%

32

88.9%

Trade, Transportation
and Utilities

47

2.9%

53

3.3%

52

98.1%

47

90.4%

46

97.9%

42

91.3%

Elementary and
Secondary Education

596

37.3%

622

39.0%

620

99.7%

509

82.1%

585

98.2%

489

83.6%

Colleges and
Universities

182

11.4%

207

13.0%

206

99.5%

182

88.3%

182

100.0%

161

88.5%

Rest of Education

6

0.4%

4

0.3%

4

100.0%

3

75.0%

3

50.0%

2

66.7%

Hospitals

92

5.8%

98

6.1%

96

98.0%

84

87.5%

91

98.9%

78

85.7%

Nursing Homes

21

1.3%

15

0.9%

14

93.3%

13

92.9%

19

90.5%

18

94.7%

Rest of Health and
Social Services

33

2.1%

25

1.6%

24

96.0%

24

100.0%

24

72.7%

24

100.0%

Public Administration

488

30.6%

497

31.1%

491

98.8%

459

93.5%

480

98.4%

448

93.3%

Other Service
Producing

92

5.8%

57

3.6%

55

96.5%

47

85.5%

90

97.8%

71

78.9%

Total

1596

100.0%

1596

100.0%

1579

98.9%

1384

87.7%

1556

97.5%

1365

87.7%

To confirm that the sample design will support our current levels of publication, we
compiled a master list of all the levels of detail currently being released for the ECI,
ECEC, and the Benefits Incidence and Key Provisions products using the State and local
government samples. This list of estimates included various industry break-outs, size of
establishment categories, the 15 largest metropolitan areas, Census Divisions, and Census
Regions. We then used the results from the simulated samples obtained during the
research process to determine if we expect to have enough data to continue releasing each
of our current estimates. We broke the publication cells into three categories: those with
less than 50 sampled establishments, 50 – 200 establishments, and 200 or more
establishments. If a publication line had at least 200 sampled establishments, NCS
assumes that we will be able to continue to publish the estimates. If a publication line had
50 or more but fewer than 200 sampled establishments, NCS expects that we will likely
still be able to release the data but will monitor the situation carefully to ensure that the
estimates meet our reliability and confidentiality publication criteria. Publication lines
with less than 50 sampled establishments would likely be non-publishable.
Based on this analysis, no published estimates fell below our imposed threshold of 50 or
fewer sampled establishments. Further, there are only seven estimates that are currently
published that fall into the 50 – 200 size category, including two detailed industries, four
Census division totals and one employment size class. In all seven of these cases, the
current NCS sample size is also below 200, but remains publishable. Additionally, the
simulated sample yielded a sample size that was 90% or more than the current sample
size and in three of the categories is actually larger than the current sample size. As the
new design is implemented, NCS will pay careful attention to these estimates to ensure
that they continue to meet all publication standards. Should any of them fail to meet
publication standards, they may need to be dropped from one or more of our publication
lines.

4176

Section on Survey Research Methods – JSM 2012

Data used to generate the detailed provisions estimates come from a single sample using
only data collected during the initiation process. When NCS began implementing the new
sample design, we also took an overall sample size reduction. So the next State and local
government sample which will be selected under the new design will be smaller than the
last sample selected under the old design. As a result, we may see some adverse effects
on our ability to publish accurate detailed data for this product line. However, we have
not yet done any research to validate this assumption.
State and local government data will be used in our estimation processes using the same
methods and estimators as will be used for the private industry samples under the new
design. Under the new design, we plan to continue computing variances using the current
Faye’s methodology described in the BLS Handbook of Methods, Chapter 8. The rest of
the estimation processes will use the current methods and formulae. NCS also plans to
continue publishing all current outputs for the ECI, ECEC, and NCS Benefits products in
the same format and at the same time as is currently done.

5. Summary and Conclusion
The NCS has conducted several different research and analysis efforts to identify options
and recommended approaches for a new sample design for the State and local
government sectors of the economy. Barring any unforeseen issues, we plan to implement
this design with the next public sector sample to be selected. That sample will be drawn
in the fall of 2014 and will be fielded for initiation in the spring of 2015. After a 15
month initiation period, the sample will rotate into estimation with estimates generated
for the December 2016 reference period completing the NCS rotation from the old design
to the new national two-stage design. While we have a design that has been carefully
reviewed and tested using sample simulations, there are still many implementation issues
that need to be resolved and other design options that can be explored. We will work on
these issues as resources permit.

References
Cochran, W. G. (1963), Sampling Techniques, New York: John Wiley & Sons, Inc.
Ernst, L.R., Guciardo, C., Ponikowski, C.H., and Tehonica, J. (2002), “Sample
Allocation and Selection for the National Compensation Survey,” 2002 Proceedings
of the Section on Survey Research Methods, Alexandria, VA: American Statistical
Association, http://www.bls.gov/osmr/abstract/st/st020150.htm.
Ferguson, Gwyn R., Coleman, Joan, Ponikowski, Chester H. (2011), “Update on the
Evaluation of Sample Design Issues in the National Compensation Survey”, 2011
Proceedings of the Section on Survey Research Methods, Alexandria, VA: American
Statistical Association. http://www.bls.gov/osmr/abstract/st/st110230.htm.
Ferguson, Gwyn R., Ponikowski, Chester, and Coleman, Joan (2010), “Evaluating
Sample Design Issues in the National Compensation Survey”, 2010 Proceedings of
the Section on Survey Research Methods, Alexandria, VA: American Statistical
Association, http://www.bls.gov/osmr/abstract/st/st100220.htm.
Izsak, Y., Ernst, L. R., Paben, S. P., Ponikowski, C.H. and Tehonica, J. (2003).
”Redesign of the National Compensation Survey.” 2003 Proceedings of the Section
on Survey Research Methods, [CD-ROM], Alexandria, VA: American Statistical
Association, http://www.bls.gov/osmr/abstract/st/st030070.htm.

4177

Section on Survey Research Methods – JSM 2012

Izsak Y., Ernst, L. R., McNulty E., Paben, S. P., Ponikowski, C. H., Springer G., and
Tehonica, J. (2005). “Update on the Redesign of the National Compensation Survey.”
2005 Proceedings of the Section on Survey Research Methods, [CD-ROM],
Alexandria,
VA:
American
Statistical
Association,
http://www.bls.gov/osmr/abstract/st/st050140.htm.
Office of Management and Budget, "Standards and Guidelines for Statistical Surveys",
September 2006,
http://www.whitehouse.gov/omb/assets/omb/inforeg/statpolicy/standards_stat_survey
s.pdf.
Office of Management and Budget, "Guidance on Agency Survey and Statistical
Information
Collections"
Memorandum,
January
20,
2006,
http://www.whitehouse.gov/omb/assets/omb/inforeg/pmc_survey_guidance_2006.pdf
Ojo, O. E. and Ponikowski, C. H. (2010), “Evaluating the Effect of Dependent Sampling
on the National Compensation Survey Earnings Estimates”, 2010 Proceedings of the
Section on Survey Research Methods, [CD-ROM], Alexandria, VA: American
Statistical Association, http://www.bls.gov/osmr/abstract/st/st100230.htm.
Rhein, Bradley D., Ponikowski, C. H., Coleman, J (2012), “Evaluation of Alternative
Measures of Size for Sampling of Establishments in the NCS”, 2012 Proceedings of
the Section on Survey Research Methods, Alexandria, VA: American Statistical
Association,http://www.amstat.org/meetings/jsm/2012/onlineprogram/AbstractDetail
s.cfm?abstractid=304848
Schumann, Richard E., "Occupational Selection and Leveling in the National
Compensation Survey", U.S. Bureau of Labor Statistics, Compensation and Working
Conditions
Online,
Originally
Posted
on
August
31,
2011,
http://www.bls.gov/opub/cwc/cm20110829ar01p1.htm
Springer, Glenn (2007), “Assessing the Effect of Government Frame Refinement on
Collecting Establishment Data for the National Compensation Survey”, 2007
Proceedings of the Section on Survey Research Methods, Alexandria, VA: American
Statistical Association, http://www.bls.gov/osmr/abstract/st/st070050.htm.
U.S. Bureau of Labor Statistics (1997) BLS Handbook of Methods, Employment and
Wages
Covered
by
Unemployment
Insurance,
Chapter
5.
http://www.bls.gov/opub/hom/pdf/homch5.pdf
U.S. Bureau of Labor Statistics (2008) BLS Handbook of Methods, National
Compensation Measures, Chapter 8. http://www.bls.gov/opub/hom/pdf/homch8.pdf
U.S. Bureau of Labor Statistics (2008) BLS Handbook of Methods, Occupational
Employment Statistics, Chapter 3. http://www.bls.gov/opub/hom/pdf/homch3.pdf
Note: Any opinions expressed in this paper are those of the author(s) and do not
constitute policy of the Bureau of Labor Statistics.

4178

Section on Survey Research Methods – JSM 2012

Appendix 1: NCS Industry Cells for Sample Selection and Allocation
Aggregate
Industry

Education

Detailed Industry

Code

NAICS Codes

Elementary and Secondary
Education

30

6111

Colleges and Universities

40

6112, 6113

Rest of Education

50

61 excl 6111-6113

99 - A

51, 52-53

Financial
Activities

Other Service-producing Part A

Goods
Producing

Goods-Producing

10

21, 23, 31-33

Hospitals

60

622

Nursing Homes

70

623

80

62 excl 622-623

20

42, 44-45, 48-49, 22

90

92 excl 928

99 - B

54-56, 71-72, 81
excl 814

Health Care

Rest of Health and Social
Services
Trade, Transportation, and
Utilities
Service
Providing

Public Administration
Other Service-producing Part B

4179

Section on Survey Research Methods – JSM 2012

Appendix 2: NCS Geographic Area Cells for Sample Selection and Allocation
Area Name
Atlanta-Sandy Springs-Gainesville, GA-AL CSA
Boston-Worcester-Manchester, MA-NH CSA
Chicago-Naperville-Michigan City, IL-IN-WI CSA
Dallas-Fort Worth, TX CSA
Detroit-Warren-Flint, MI CSA
Houston-Baytown-Huntsville, TX CSA
Los Angeles-Long Beach-Riverside, CA CSA
Minneapolis-St. Paul-St. Cloud, MN-WI CSA
New York-Newark-Bridgeport, NY-NJ-CT-PA CSA
Philadelphia-Camden-Vineland, PA-NJ-DE-MD CSA
San Jose-San Francisco-Oakland, CA CSA
Seattle-Tacoma-Olympia, WA CSA
Washington-Baltimore-No. Virginia, DC-MD-VA-WV CSA
Miami-Fort Lauderdale-Miami Beach, FL
Phoenix-Mesa-Scottsdale, AZ
Rest of New England Census Division
Rest of Middle Atlantic Census Division
Rest of East South Central Census Division
Rest of South Atlantic Census Division
Rest of East North Central Census Division
Rest of West North Central Census Division
Rest of West South Central Census Division
Rest of Mountain Census Division
Rest of Pacific Census Division

4180


File Typeapplication/pdf
File TitleState and Local Government Sample Design for the National Compensation Survey
AuthorGwyn R. Ferguson, Chester H. Ponikowski and Erin McNulty
File Modified2013-05-15
File Created2012-09-28

© 2024 OMB.report | Privacy Policy