Form 587 Instructions for Completing Forms FERC-587

Form FERC-587
OMB No. 1902-0145
(Expires 07/31/2015)

INSTRUCTIONS FOR COMPLETING FORMS FERC-587
Form FERC-587 is issued to identify those project boundary maps associated with federal lands. There
are two versions of the form to account for the two different ways land is surveyed in the United States,
the Public Land States and the Non-Public Land States. The Public Land States version is used for
projects located on the western side of the United States, and is based on the Federal Township and
range system. The Non-Public Land States version is to be used for most of the projects located on the
eastern side of United States, including Texas, and is based just on county information.
To complete either form you must:
1. Identify the boundary maps in the license, preliminary permit, or in the application for license,
amendment of license, or preliminary permit.
2. Provide the project number assigned by FERC. Type or print legibly when entering information on the
form. Include your signature, and date completing the form.
3. Microfilm copies of the project boundary maps must be submitted with the land description forms as
directed by FERC. Each map must be reproduced on silver or gelatin 35 mm microfilm mounted on type
D (3-1/4" X 7-3/8”) aperture cards. The project number followed by a hyphen and sheet number or letter
must be typed on the front of each card in the upper right corner.
4. Mail a copy of the completed land description forms and aperture cards to:
Secretary
Routing Code PJ-12
Federal Energy Regulatory Commission
888 First Street NE
Washington, DC 20426
Another copy of the form FERC-587 must be filed with the Bureau of Land Management state office(s)
involved using the format below. Go to the following internet address to get mailing address for a
particular State Office ( http://www.blm.gov/nhp/directory/index.htm).
State Director
Bureau of Land Management
City, State Zip
ATTN: FERC Withdrawal Recordation
5. Keep the land description forms and project boundary drawings up-to-date. If the project boundary
changes, revised land description forms and drawings must be provided to the Commission immediately.
The revised land description forms must be fully completed so as to supersede (not supplement) earlier
forms. Mail updates in accordance with instruction 4.
If there are any questions, please contact the FERC at (202) 502-8872.
6. Where to send comments on the Public Reporting Burden. The public reporting burden for this
collection of information is estimated to average 1 hour per response, including the time for reviewing the
instruction, searching existing data sources, gathering and maintaining the data needed, and completing
and reviewing the collection of information. Send comments regarding this burden estimate or any
aspect of this collection of information, including suggestions for reducing this burden, to the Federal
Energy Regulatory Commission, 888 First Street NE, Washington, DC 20426 (Attention: Information
Clearance Officer, CIO) or email [email protected]; and to the Office of Management and
Budget via email to the Office of Information and Regulatory Affairs at [email protected]
(Attention: Federal Energy Regulatory Commission Desk Officer). This is a mandatory information
collection requirement.

To complete the Public Land States (Rectangular Survey System Lands) you need
to:
1. Identify the state in which the project is located. If the project lies within multiple states, then provide
the state for the township which the form refers. Only one state should appear on the form.
2. Provide the FERC Project Number assigned by FERC (e.g., P-96). Only one project number should
appear on the form.
3. Identify the Township, Range and Meridian where the project lands and federal lands overlap. Each
township is depicted in a map by an identifying number according to where it falls (e.g. T9SR22E). The
east/west numbers are identified by the term "Range" and the north/south numbers are identified by the
term "Township". The completed land description form will identify the sections of the township affected
by the project (both federal and non-federal lands) and provide references to the maps that show the
project boundary in those sections. Complete a separate form for each township identified, regardless of
the ownership status of the lands.
4. Identify whether you are completing the form for a licensed project or a preliminary permit. Identify
whether the license is pending or issued. Provide an expiration date in case of a preliminary permit.
5. Using the township grid provided on the form, identify the section(s), in which the federal land is
located on the map. Every Section is numbered, from 1 to 36, depending upon its position within the
township. Specify the exhibit sheet (drawing) number, or letter within the appropriate township section.
If the FERC sheet numbers have been assigned, they must be used on the land description forms. In
those cases where FERC has not assigned sheet numbers, assign letter designations A, B, C, etc., in lieu
of FERC sheet numbers. Permittees and permit applicants must assign letter designations since FERC
does not assign sheet numbers for permits. The sheet numbers or letters are to be entered in the
appropriate place on the land description forms to provide references to the maps. (i.e., if sheets 74 and
75 show the project boundary in sections 13 and 24 of a township, the numbers 74 and 75 would be
inserted in the box on the land description form representing sections 13 and 24).
6. Provide the name and telephone number of the person completing the form, and the date the form is
submitted.

Form FERC-587
OMB No. 1902-0145
(Expires 07/31/2015)
LAND DESCRIPTION
Public Land States
(Rectangular Survey System Lands)

2. FERC PROJECT NO. __________________

1. STATE
RANGE

3. TOWNSHIP

MERIDIAN _____________

4. Check one:

Check one:

License
Preliminary Permit

Pending
Issued

If preliminary permit is issued, give expiration date: __________________________

Section 6

5. EXHIBIT SHEET NUMBERS OR LETTERS
5
4
3
2

1

7

8

9

10

11

12

18

17

16

15

14

13

19

20

21

22

23

24

30

29

28

27

26

25

31

32

33

34

35

36

_

6. contact's name
telephone no. (
Date submitted

)
_

This information is necessary for the Federal Energy Regulatory Commission to discharge its responsibilities under
Section 24 of the Federal Power Act.

To complete the Non-Public Land States ( Non-Rectangular Survey System Lands
in Public Land States) form you need to:
1. Identify the state in which the project is located. If the project lies within multiple states, then provide
the state for the counties which the form refers. Only one state should appear on the form.
2. Provide the FERC Project Number assigned by FERC (e.g., P-100). Only one project number
should appear on the form.
3. Identify the federal reservation that is located within the project boundary as shown on the maps.
4. Identify the federal land holding agency responsible for the federal land within the project boundary
as shown on the maps.
5. Identify the county or counties the federal land lies in.
6. Identify whether you are completing the form for a licensed project or a preliminary permit. Identify
whether the license is pending or issued. Provide an expiration date in case of a preliminary permit.
7. Complete a land description form for each federal tract with lands inside project boundaries. If more
than one land description form is required to list the Federal tracts, page numbers must be shown in the
upper right corner of the form, e.g., page 1 of 2. Do not list more than one project or state on each form.
8. Provide sheet numbers or letters that should be entered on the lines provided under "Exhibit Sheet
Numbers) or Letter(s)" opposite to the corresponding Federal tract identification designated by the
Federal land holding agency. Specify the exhibit sheet (drawing) number, or letter within the appropriate
township section. If the FERC sheet numbers have been assigned, they must be used on the land
description forms. In those cases where FERC has not assigned sheet numbers, assign letter
designations A, B, C, etc., in lieu of FERC sheet numbers. Permittees and permit applicants must assign
letter designations since FERC does not assign sheet numbers for permits.
9. Provide the name, telephone number of the person completing the form, and the date the form is
submitted.

Form FERC-587
OMB No. 1902-0145
(Expires 07/31/2015)
LAND DESCRIPTION
Non-Public Land States
(and Non-Rectangular Survey System Lands in Public Land States)

2. FERC PROJECT NO. ____________________

1. STATE

3. FEDERAL RESERVATION: ___________________________________________
4. FEDERAL LAND HOLDING AGENCY: __________________________________
5. Counties: _________________________________________________________
6. Check one:
License
______Preliminary Permit

Check one:
Pending
Issued

If preliminary permit is issued, give expiration date:

7. Federal Tract(s)
Identification

8. Exhibit Sheet Number(s)
or Letter(s)

_

9. contact's name
telephone no. (
date submitted

)
_

This information is necessary for the Federal Energy Regulatory Commission to discharge its responsibilities under
Section 24 of the Federal Power Act.

BUREAU OF LAND MANAGEMENT STATE OFFICES
Last Updated August 16, 2012
ALASKA

Bureau of Land Management
Division of Alaska Lands (AK-963)
222 W 7TH AVE STOP 13
ANCHORAGE AK 99513-7504

ARIZONA

Bureau of Land Management
Division of Lands and Renewable Resources (AZ-930)
1 N CENTRAL AVE STE 800
PHOENIX AZ 85004-4427

CALIFORNIA

Bureau of Land Management
Branch of Adjudication and Records (CA-943.5)
2800 COTTAGE WAY SUITE W1623
SACRAMENTO CA 95825-1886

COLORADO

Bureau of Land Management
Branch of Realty Programs (CO-935)
2850 YOUNGFIELD ST
LAKEWOOD CO 80215-7210

IDAHO

Bureau of Land Management
Land Services Section (ID-943A)
1387 S VINNELL WAY
BOISE ID 83709-1657

MONTANA
NORTH DAKOTA
SOUTH DAKOTA

Bureau of Land Management
Branch of Land Resources (MT-932)
5001 SOUTHGATE DR
BILLINGS MT 59101-4669

NEVADA

Bureau of Land Management
Branch of Lands and Minerals Operations (NV-943.2)
1340 FINANCIAL BLVD
RENO NV 89502-7147

NEW MEXICO
OKLAHOMA
KANSAS
TEXAS

Bureau of Land Management
Branch of Lands and Minerals Operations (NM-943C-2)
PO BOX 27115
SANTA FE NM 87502-0115

OREGON
WASHINGTON

Bureau of Land Management
Lands and Minerals Adjudication Section (OR 936.1)
PO BOX 2965
PORTLAND OR 97208-2965

UTAH

Bureau of Land Management
Branch of Lands and Minerals Operations (UT-942)
PO BOX 45155
SALT LAKE CITY UT 84145-0155

WYOMING
NEBRASKA

Bureau of Land Management
Branch of Land Resources (WY-931)
PO BOX 1828
CHEYENNE WY 82003-1828

ARKANSAS
IOWA
LOUISIANA
MINNESOTA
MISSOURI
DISTRICT OF
COLUMBIA
PUERTO RICO
and all states east
of the Mississippi
River

Bureau of Land Management
Branch of Lands (ES-930)
7450 BOSTON BLVD
SPRINGFIELD VA 22153