Expert Opinion on the Impact of DOE/EERE BTO Investments - Business/Non-Profit

Impact Evaluation of HVAC, Water-Heating, and Appliance Technologies R&D Program

Advanced Refrigeration 2016.11.07

Expert Opinion on the Impact of DOE/EERE BTO Investments - Business/Non-Profit

OMB: 1910-5186

Document [docx]
Download: docx | pdf

OMB Control No. 1910-NEW

Exp. Date XX/XX/XXXX

Interview Guide: DOE/EERE Building Technologies Office Economic Impact Study

Advanced Refrigeration Research


The U.S. Department of Energy has contracted with RTI International to study the impact of Building Technologies Office research and development (R&D) investments and ancillary activities. This survey looks specifically at the impact of the Advanced Refrigeration R&D activities supported by DOE.


Your perspective will help guide DOE’s planning and investment process. Participation in this study is confidential; only aggregated information will be included in any deliverables or communications. Your name and your company’s/organization’s name will not be disclosed.


Our research products will be an economic analysis, final report, and presentation materials. All deliverables will be publicly available in late summer 2017, and these will be shared with you as soon as they are released.


Throughout the survey, we will be seeking both qualitative and quantitative information. Quantitative information may be rough approximations based on your experience, but this data is important for us to aggregate the responses of all the survey participants in a meaningful way.


If you have questions, please contact:


Paperwork Reduction Act Burden Disclosure Statement

This data is being collected to evaluate DOE Office of Energy Efficiency and Renewable Energy (EERE) Building Technologies Office R&D investments. The data you supply will be used for estimating the economic benefits and costs of R&D investments.

Public reporting burden for this collection of information is estimated to average 60 minutes per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Office of the Chief Information Officer, Records & Privacy Management Division, IM-23, Paperwork Reduction Project 1910-NEW, U.S. Department of Energy, 1000 Independence Ave SW, Washington, DC, 20585-1290; and to the Office of Management and Budget (OMB), OIRA, Paperwork Reduction Project 1910-NEW, Washington, DC 20503.

Notwithstanding any other provision of the law, no person is required to respond to, nor shall any person be subject to a penalty for failure to comply with a collection of information subject to the requirements of the Paperwork Reduction Act unless that collection of information displays a currently valid OMB control number.

Submission of this data is voluntary.


Background on Advanced Refrigeration Technology


Figure 1 below lists DOE research activities along with other activities that were happening during the same time frame. Figure 2 displays these activities on a visual timeline. We will ask about the impact of DOE funded activities on private sector R&D costs, product costs, and performance, among other things. Figure 3a and Figure 3b show sales-weighted average efficiency of residential refrigerators along with the timing of state and federal efficiency standards.


Figure 1: Factors Influencing Refrigeration Efficiency in the U.S.

  • Department of Energy (DOE)

    • 1981: Development of a more efficient compressor by Columbus Products engineers, under subcontract to ORNL. Design changes to the motor, suction muffler, and compressor valve assembly achieved a 44% reduction in energy use.

    • 1993-1998: Under a CRADA with the Appliance Industry-Government CFC Replacement Consortium (a subsidiary of Association of Home Appliance Manufacturers [AHAM]), engineers from ORNL and industry explored new technical options to improve refrigerator energy efficiency using non-CFC refrigerants.

    • 1982: Multiple unequal parallel compressors, now the industry standard, can be traced to R&D at ORNL that demonstrated potential energy savings of 15% to 26%.

    • 1984: Collaboration between ORNL and Foster-Miller Associates, H. E. Butt Grocery, and Friedrich Commercial Refrigeration led to the commercialization of an advanced supermarket refrigeration system, which by the late 1990s was used by about 80% of supermarkets.

    • 1991: Under a CRADA with Lockheed Martin Energy Research and the Appliance Research Consortium, DOE funded the development and testing of a 1 kWh/day refrigerator-freezer, which represented a 50% reduction compared with the 1993 NAECA standard for 20 ft3 units. The final prototype achieved an energy consumption level of 0.93 kWh/day.

    • 2001: The development, with National Energy Technology Laboratory (NETL), A.D. Little, and Delfield, of a commercial refrigerator.

  • State and Federal Efficiency standards

    • CA state standards (1978, 1980)

    • Federal efficiency standards (1990, 1993, 2001)

  • Environmental standards

    • 1996: CFC phase out schedule established by the Montreal Protocol

  • Utility led-initiatives

    • Incentives/rebates for customers to purchase more efficient models

    • 1993: The Super-Efficient Refrigerator Program (SERP) which awarded $30 million to the refrigerator manufacturer that developed and commercialized a refrigerator that exceeded 1993 federal efficiency standards by at least 25%

  • Industry

    • Mid-1970s: Manufacturers switched from manually installed fiberglass insulation to robotically blown polyurethane foam installation which improved product quality and was more energy efficiency.

  • Other

    • 1979: EnergyGuide appliance labeling rules established by the FTC

  • External factors such as the oil price shocks of 1973 and 1979 and real electricity prices peaking in 1982-83






Figure 2: Timing of Policies, Ongoing Events, and Standards



Figure 3 – Average Energy Use per Unit per Year

Figure 3a – 1947 to 2001

Source: National Academy of Sciences. 2001. “Energy Research at DOE: Was It Worth It? Energy Efficiency and Fossil Energy Research 1978 to 2000.”





Figure 3b – 1972 to 2014

Source: Appliance Standards Awareness Project, 2015




SECTION I. Respondent Background


  1. Which of the following best describes your background in relation to advanced refrigeration research & development? Check all that apply.

Worked for a manufacturer that conducted research/testing/other technical efforts

__ Refrigerator manufacturer

__ Other: _____________________

Led public-private collaboration on technical efforts

Participated in public-private collaboration on technical efforts

Led industry-only technical efforts for a manufacturer

Participated in industry-only technical efforts

Employed in a federal agency or research lab

Employed in a state energy office

Worked for a trade association

Worked for a university or research institute

Worked for an electric utility

Other: ____________________________


Please give a brief description of your background:



  1. Were you involved in or familiar with any of the following programs/activities related to advanced refrigeration? Check all that apply.


Directly Involved

Very Familiar

Somewhat Familiar

  • Development of a compressor by Columbus Products, under subcontract to ORNL


  • R&D at ORNL on multiple unequal parallel compressors


  • Collaboration on an advanced supermarket refrigeration system between ORNL and Foster-Miller Associates, H. E. Butt Grocery, and Friedrich Commercial Refrigeration


  • Development of a commercial refrigerator with National Energy Technology Laboratory, A.D. Little, and Delfield


  • CRADA with the Appliance Industry-Government CFC Replacement Consortium


  • Other


Please give a brief description:



  1. Have you ever received DOE funding for your work or participated in collaborative R&D activities with a DOE-funded laboratory such as Oak Ridge National Laboratory or the National Energy Technology Laboratory?

No

Yes. Please give a brief description:



  1. Have you been involved in commercial R&D related to refrigeration in the past 15 years?

No (please skip down to Section III)

Yes








SECTION II. This next set of questions pertains to DOE’s involvement in and impact on the research and development activities related to advanced refrigeration technology that you were involved in. We will be asking you to quantify these impacts to the best of your ability.


Ask these questions if the respondent answered Yes to Question 4.


We are trying to isolate the impact of DOE R&D investments and activities as much as possible, and this poses some challenges. For example, efficiency standards affect companies’ incentives to perform R&D and commercialize more efficient refrigeration systems, and the DOE R&D activities we are focused on have indirect effects on the evolution of standards. Similarly, EnergyGuide labeling, ENERGY STAR qualification and rebates rely on test methods linked to DOE R&D activities.


Therefore, if we were to hold fixed the exact timeline of these factors (for instance, the timing of updates to standards) we would be assuming away a part of the impact we are trying to estimate. What we would like to try to do instead is to think about holding constant the environment—the institutional frameworks—in which standards, labeling, and subsidies evolve, and consider what would happen without the DOE R&D-related activities and investments described in Question 5:


  1. In what ways has your R&D work on refrigeration been influenced by DOE?

Provide a number from 0 to 3 (0 = DOE did not contribute in this way; 1 = minimal DOE contribution; 2 = moderate DOE contribution; 3 = major DOE contribution).

______Through DOE’s contributions to the knowledge base on which R&D work drew (e.g., formal science literature, conference presentations and discussions, patents, knowledge and training of yourself and your colleagues)

______Through access to scientific and engineering data produced by DOE laboratories

______Through the licensing/transfer of technology that DOE helped to develop

______Through consultations with DOE scientists and engineers

______Through access to DOE laboratory facilities

______Through equipment/component testing performed at DOE laboratories

______Through direct R&D funding from DOE

______Other: _______________________________

DOE had no influence (please skip down to question 8)

Please give a brief description of DOE influences:



  1. Would your R&D work on refrigeration have been undertaken without the DOE factors identified above? (please select the most likely scenario)

The work would not have been undertaken

At least some of the work would still have been undertaken, but the effort levels, costs, timelines, and/or outcomes would have been different

The work would still have been undertaken, without significant difference in effort levels, costs, timelines, or outcomes (please skip down to question 8)

Please give a brief description of how effort levels, costs, timelines, and/or outcomes would have been different (or why the work would not have been undertaken). (Note: If the work would not have been undertaken at all, please skip down to question 8):



  1. Without the DOE factors identified above:

The level of effort, in terms of research personnel years, would have been

_____________ research personnel years [ MORE LESS] (a range is fine).

OR ______________ % [ MORE LESS] (a range is fine).

The cost of the work would have been

$_____________ x1000 $ [ MORE LESS] (a range is fine).

OR ______________ % [ MORE LESS] (a range is fine).

To reach the same outcomes (in terms of energy efficiency and other performance attributes) would have taken

________________ calendar years [ MORE LESS] (a range is fine).

OR ______________ % [ MORE LESS] (a range is fine).

If any of the DOE factors identified in question 5 were especially important for one or more of these impacts, please give a short explanation:




  1. What were the technical outcomes of your R&D work? Where possible, please provide the baseline parameter and improved parameter (e.g., pre and post energy efficiency, or pre and post equipment cost).

Improvements in energy efficiency

Please describe:



Improvements in other performance attributes

Please describe:



Improvements in equipment cost for which these levels of energy efficiency or other performance attributes could be achieved

Please describe and include cost savings:







  1. If DOE factors identified above had any impact on these outcomes, what was the DOE effect in terms of the proportion of the improvements you view were attributable to DOE activities?

Improvements in Energy Efficiency

Improvements in performance attributes

Improvements in equipment costs

Less than 10%

Less than 10%

Less than 10%


Between 10-24%

Between 10-24%

Between 10-24%

Between 25-49%

Between 25-49%

Between 25-49%

Between 50-75%

Between 50-75%

Between 50-75%

Greater than 75%

Greater than 75%

Greater than 75%



Please give a short explanation of your reasoning. Please note if any of the DOE factors checked above were especially important for one or more of these impacts:



  1. Was a new product commercialized as a result of this R&D work?

No (please skip down to Section III)

Yes



  1. Without the DOE factors identified in question 5, taking into account the impacts on energy efficiency, other performance attributes, and equipment cost described above:

    1. How likely is it that your company would have commercialized the product in the same time frame (please select one)?

No chance the product would have been commercialized.

0% to 25% chance

25% to 50% chance

50% to 75% chance

75% to 100% chance

The product would have been commercialized in the same time frame without the DOE factors identified above.

    1. If your company had commercialized the product without the DOE factors identified above, how would its sales volume today compare with that of the product actually commercialized?

No difference in sales (i.e., any difference in price, energy efficiency, and performance attributes would have negligible effect on sales)

Sales would have been lower by roughly _________% (a range is fine).

Sales would have been higher by roughly_________% (a range is fine).

Please give a short explanation of your reasoning:



(Respondents answering Section II questions skip to Section IV)



SECTION III. This next set of questions pertains to your opinion of DOE’s influence on the market and industry trends for refrigeration systems in general.


We are trying to isolate the impact of DOE R&D investments and activities as much as possible, and this poses some challenges. For example, efficiency standards affect companies’ incentives to perform R&D and commercialize more efficient refrigeration systems, and the DOE R&D activities we are focused on have indirect effects on the evolution of standards. Similarly, EnergyGuide labeling, ENERGY STAR qualification and rebates rely on test methods linked to DOE R&D activities.


Therefore, if we were to hold fixed the exact timeline of these factors (for instance, the timing of updates to standards) we would be assuming away a part of the impact we are trying to estimate. What we would like to try to do instead is to think about holding constant the environment—the institutional frameworks—in which standards, labeling, and subsidies evolve, and consider what would happen without the DOE R&D-related activities and investments described in Question 12:


  1. How did DOE impact the commercial R&D (performed in the last 15 years) necessary for companies to bring more energy-efficient refrigeration systems to market?

Provide a number from 0 to 3 (0 = DOE did not contribute in this way; 1 = minimal DOE contribution; 2 = moderate DOE contribution; 3 = major DOE contribution).

______Through DOE’s contributions to the knowledge base on which R&D work drew (e.g., formal science literature, conference presentations and discussions, patents, knowledge and training of yourself and your colleagues)

______Through access to scientific and engineering data produced by DOE laboratories

______Through the licensing/transfer of technology that DOE helped to develop

______Through consultations with DOE scientists and engineers

______Through access to DOE laboratory facilities

______Through equipment/component testing performed at DOE laboratories

______Through direct R&D funding from DOE

______Other: _______________________________

______DOE had no influence (please skip down to question 15)

Please give a brief description of DOE influences:






  1. Without the DOE impacts discussed in Question 12, would the commercial R&D necessary to bring more energy-efficient refrigeration systems to market still have been undertaken within the same time frame?

The commercial R&D would not have been undertaken.

At least some of the commercial R&D would still have been undertaken, but the effort levels, costs, timelines, and/or outcomes would have been different.

The commercial R&D would still have been undertaken, without significant difference in effort levels, costs, timelines, or outcomes.

Please give a brief explanation:


  1. Given your answers to Question 13, how would the market for refrigeration systems look different than it does today without the DOE impacts discussed above?

Average energy use would be: higher

lower

by roughly _____________ %.

Average price would be: higher

lower

by roughly _____________ %.

Average sales volume would be: higher

lower

by roughly _____________ %.

There would be no difference (the market would be exactly as it is today).

Please give a brief explanation:


Section IV. Additional Comments


  1. Are there any additional comments you would like to share?


Respondent Contact Information (optional)

Name: _______________________________________________________________________________

Title: ________________________________________________________________________________

Division: _____________________________________________________________________________

Company/Organization: _________________________________________________________________

Location, if not USA: ____________________________________________________________________­­­


Would you be willing to be contacted for a brief follow-up discussion of your responses to this survey?

Yes, by phone ______________________

Yes, by email ______________________

No


THANK YOU for contributing your time and insight to the study.

Page 11 of 11

File Typeapplication/vnd.openxmlformats-officedocument.wordprocessingml.document
File TitleMonth 200X
AuthorCannada
File Modified0000-00-00
File Created2021-01-24

© 2024 OMB.report | Privacy Policy