Last updated on 1/25/18
Please note this document may be updated and improved periodically based on feedback from health plans and other stakeholders.
A1 - The full report and additional information can be found at the LAN 2017 Measurement Effort website.
A2 - For the purposes of this survey, the commercial market segment includes individual, small group, large group, fully insured, self-funded and exchange business. To the extent a health plan provides benefits for the Federal Employee Health Benefit (FEHB) program, state active employee programs, and/or an exchange, this business should be considered commercial and included in the survey. Responses to the survey will reflect dollars paid for medical, behavioral health, and pharmacy benefits (to the extent possible) in CY 2017 or the most recent 12-month period for which data is available. Spending for dental and vision services are excluded. See “General Information” tab in the Excel workbook for more information.
A3 - For the purposes of this survey, the Medicaid market segment includes both business with a state to provide health benefits to Medicaid eligible individuals and state-run programs themselves. Data submitted for this survey should exclude the following: health care spending for dual-eligible beneficiaries, health care spending for long-term care (LTC), spending for dental and vision services. Responses to the survey will reflect dollars paid for medical, behavioral health, and pharmacy benefits (to the extent possible) in CY 2017 or the most recent 12-month period for which data is available. See “General Information” tab in the Excel workbook for more information.
A4 - For the purposes of this survey, the Medicare Advantage market segment includes a type of Medicare health plan offered by a private company that contracts with Medicare to provide all Part A and Part B benefits. Medicare Advantage Plans include Health Maintenance Organizations, Preferred Provider Organizations, Private Fee-for-Service Plans, and Special Needs Plans. To the extent the Medicare Advantage plan has Part D or drug spending under its operations, it should include this information in its response. Responses to the survey will reflect
dollars paid for medical, behavioral health, and pharmacy benefits (to the extent possible) in CY 2017 or the most recent 12-month period for which data is available. Health care spending for dual-eligible beneficiaries, and dental and vision services are excluded. See “General Information” tab in the Excel workbook for more information.
A5 - For the purposes of this survey, “providers" include all health care providers for whom there is health care spending. This includes, for example, pharmacy, behavioral health, and durable medical equipment (DME) spending in addition to physicians, hospitals and other traditional health care providers, and does not include dental and vision. If the plan does not provide a pharmacy benefit or behavioral health benefit (e.g. those services are provided by a different health plan or entity) and therefore does not spend dollars on these services, it should input 0 dollars for those services. There are cells on the “General Information” tab of the survey where the plan can indicate whether it is including the pharmacy benefit or behavioral health in their response and, if so, what percent of the spending either or both represent.
A6 - For the purposes of this survey, “legacy payment” includes any payment that does not include a quality component. Examples include: traditional fee-for-service payment, diagnosis- related group (DRG) payments, and traditional capitation without quality. Following the Refreshed APM Framework, legacy payments fall into category 1.
A7 - Plans should report the total dollars, which includes the underlying payment plus any incentive, such as fee-for-service with a bonus for performance (P4P), fee-for-service and savings that were shared with providers, etc. For APMs in which the provider is responsible for the total cost of a member or beneficiary’s health care, the total costs incurred by the member or beneficiary covered under that plan should be included in the numerator. See Q12 for more detail.
A8 - Potentially. Given the timing of this survey, some plans may not have access to final CY 2017 data to report. Under these circumstances, the plan should report the most recent 12 months for which it has data (e.g., November 2016 – October 2017). Under the “General Information” tab, we ask plans whether they are using CY 2017 data or a different 12-month period. If a plan reports data using the most recent 12-month approach, it must specify the term and use this same 12-month period for all metrics. Differing reporting periods will be addressed in communicating the findings of this measurement effort such that it is clear what proportion of spending was reported in any
explicitly identified reporting period, and the range of reporting periods included in any more global statement.
A9 - Annual. For example, if the plan enters into a shared savings contract effective August 1, 2017, (and the reporting period is CY 2017) the plan should report the total dollars paid to that provider under the shared savings arrangement from August 1, 2017 – December 31, 2017 whereas it would report dollars paid to the provider between January 1, 2017 and July 30, 2017 under as Category 1. Remember, plans are to report ALL of the dollars flowing through that payment arrangement, not just the bonus or savings. The bonus or savings amounts may not be reconciled for some time so it is acceptable for the plan to estimate the bonus or savings payment amount (if any).
A10 - The metrics should report actual dollars paid to providers through APMs in CY 2017 or during the specified time period. For example, if a provider is paid $120,000 for the entire year, but entered a shared savings contract with the plan on July 1, 2017, the payments the provider received from January 1, 2017 through June 31, 2017 ($60,000) would be reported as fee-for-service and the payments the provider received from July 1, 2017 through December 31, 2017 ($60,000) would be reported as shared savings, if the reporting period is for CY 2017. Another acceptable approach is annualizing dollars paid in APMs based on a point in time, e.g. on a single day such as December 31, 2017, only if the APM contract existed for the full 12-month period. For example, a provider in a shared savings arrangement received $300 (a combination of $285 base payment plus $15 in shared savings), which, if multiplied by 365 (annualized), would be reported as $109,500 in shared savings CY 2017. An unacceptable approach is counting all of dollars paid to the provider as being in APMs for the entire year, regardless of when the contract was executed (e.g. considering the first example, counting $120,000 in shared savings even though the contract was only in place for half of the reporting year). NOTE: this method is much more vulnerable to variation from actual spending depending on the representativeness of the time period annualized.
A11 - If a plan (commercial, Medicaid, or MA) operates an APM where a physician group, primary care physician, or other physician is held responsible for ALL of the attributed member’s health care spending, including outpatient, inpatient, specialists, pharmacy, out-of- network, etc., all of the dollars associated with the attributed members can be included in the numerator.
A12 - No; however, most, if not all plans, will report some dollars under Category 1. In most cases, plans are experimenting with different payment methods that span across Categories 2 through 4. Plans should report the alternative payment models they had in effect in 2017. For example, a plan may have shared-risk arrangements planned for 2018, but if they did not have any of those arrangements effective during the reporting period (CY 2017, for example), then the plan would report $0.00 under the shared-risk item under Category 3.
Measures of appropriate care are required in order for a payment method to qualify as a Category 3 or 4 APM to ensure providers are incentivized to reduce/eliminate care that is wasteful and potentially harmful to patients. Appropriate care measures also ensure providers do not withhold necessary care and are incentivized to provide necessary care.
A14 - According to the refreshed Framework, this arrangement is aligned to Category 2C.
A15 - Both traditional shared savings and utilization-based shared savings allow providers to share in a portion of any savings they generate as long as they meet pre-established quality targets.
Traditional shared savings (3A): Requires that providers meet a pre-established set target for spending. Traditional shared savings provides an upside only financial incentive for providers or provider entities to reduce unnecessary spending for a defined population or patients or an episode of care, and to meet quality targets.
Utilization-based shared savings (3A): Requires that providers meet pre-established utilization targets that produce savings (e.g., Medicare CPC+ Track 1 program). There are no financial targets in these arrangements; instead there are utilization targets that impact a significant portion of the total cost of care. Examples of utilization measures include, but are not limited to: emergency department utilization, inpatient admissions, and readmissions. Utilization-based shared savings provides an upside only financial incentive for providers or provider entities to reduce unnecessary care or utilization for a defined population of patients or an episode of care, and to meet quality targets.
The refreshed Framework notes that utilization measures can provide strong proxies for total cost of care (TCOC) and can take the place of formal financial benchmarks or spending targets. Improvement on utilization metrics, which could be either increased utilization where services are underutilized or decreased utilization where unnecessary services are over-utilized, is expected to improve quality while decreasing costs. To the extent the health plan has an APM program modeled after the CPC+ Track 1 program, or has designed a similar program where utilization measures are a strong proxy for financial benchmarks, these programs can be categorized in the utilization-based shared savings payment method, in the 3A subcategory. See Appendix A of the Refreshed APM Framework for more information.
A16 - All population-based payment methods are paid on a per member per month (PMPM) basis for a given time period, such as a month or year, and are tied to quality performance. However, there are several distinctions among the various population-based payment methods.
Full or percent of premium population-based payment tied to quality (4B): A per member per month (PMPM) payment for all of the care (e.g. inpatient, outpatient, specialists, pharmacy, out- of-network, etc.) that attributed members receive. The other two population-based payment arrangement types are not comprehensive and do not cover all of the health care that an attributed member receives.
Condition-specific population-based payment tied to quality (4A): A per member per month (PMPM) payment to providers for inpatient and outpatient care that an attributed member population may receive for a particular condition (e.g., diabetes) in a given time period, such as a month or year, including inpatient care and facility fees.
Population-based payment that is not condition-specific tied to quality (3B): A per member per month (PMPM) payment to providers for outpatient or professional services that an attributed member population may receive in a given time period, such as a month or year. The services for which the payment covers are predefined and not specific to any particular condition.
For example, Blue Cross Blue Shield Plan of State A has a national employer account with the majority of its covered lives in State A, as well as some covered lives in State B. Under these circumstances, the employer’s covered lives in State B are reported by BCBS of State B; BCBS of State A reports dollars and covered lives that it manages for the employer in State A. BCBS of State B reports dollars and covered lives that it manages for the employer in State B, even if some of the State B lives originated as part of the relationship with the employer in State A.
A19 - No. Data will be aggregated by line of business. It will not be shared on an individual plan basis.
Individual plan data will be collected and securely stored by MITRE and its sub-contractor, Catalyst for Payment Reform, for this measurement effort. The Center for Medicare and Medicaid Services, the Center for Medicare and Medicaid Innovation, LAN members, or participating payers will not have access to individual plan spending data.
A20 – Click here to access the Refreshed APM Framework White Paper.
| File Type | application/vnd.openxmlformats-officedocument.wordprocessingml.document |
| File Title | 2017 Frequently Asked Questions |
| Author | CPR |
| File Modified | 0000-00-00 |
| File Created | 2021-01-21 |