Owners and operators of chromium
electroplating or chromium anodizing tanks at existing and new
facilities performing hard chromium electroplating, decorative
chromium electroplating, and chromium anodizing are required to
comply with reporting and record keeping requirements for the
general provisions of 40 CFR Part 63, Subpart A, as well as the
applicable specific standards found at 40 CFR Part 63, Subpart N.
This includes submitting initial notifications, performance tests
and periodic reports and results, and maintaining records of the
occurrence and duration of any startup, shutdown, or malfunction in
the operation of an affected facility, or any period during which
the monitoring system is inoperative. These reports are used by EPA
to determine compliance with the standards.
There is an increase in the
respondent burden hours and a decrease in the number of annual
responses and the annual cost burden. The burden currently approved
by OMB is the sum of the burden from the 2012 amendment and the
existing rule. Changes to the OMB approved burden occurred because
this ICR is updated to reflect the ongoing compliance burden and
cost of the 2012 rule, and to use more recent estimate on the
number of sources for all burden calculations. The increase in the
respondent labor hours is primarily due to the correction of a data
entry error, which was that the number of area sources using
wetting agents monitoring on a regular schedule was switched with
the number monitoring on a reduced schedule, and vice versa.
On behalf of this Federal agency, I certify that
the collection of information encompassed by this request complies
with 5 CFR 1320.9 and the related provisions of 5 CFR
1320.8(b)(3).
The following is a summary of the topics, regarding
the proposed collection of information, that the certification
covers:
(i) Why the information is being collected;
(ii) Use of information;
(iii) Burden estimate;
(iv) Nature of response (voluntary, required for a
benefit, or mandatory);
(v) Nature and extent of confidentiality; and
(vi) Need to display currently valid OMB control
number;
If you are unable to certify compliance with any of
these provisions, identify the item by leaving the box unchecked
and explain the reason in the Supporting Statement.