Section Specifications for NVF
Round 69
Created on 5/9/2014 6:13:13 PM
Box Instructions
GO TO NAV1 - NAVIGATE.
Other Programming Instructions
Background Variable Assignments
Assign
the following section dispositions as described below:
CROSYY:
If
RHMDDISP = 96/Complete and IRDISP = 92/ReadyToInterview and there is
a MD STAY ARRAY, use the MD STAY ARRAY for the following
calculations.
Else use the RH STAY ARRAY.
If RHDISP
= 94/MissingData or 96/Complete and SPDISP <> 11/FinalNonResp
and last chronological STAY is not in the target facility:
If
RH7-RHALIVE = 0/No and last chronological STAY has STAY.STAYCLAS =
3/Hospital and all STAYs after last STAY in target facility have
STAY.STAYCLAS = 3/Hospital
then CROSYY = EMPTY.
Else
CROSYY = STAY.STAYEYY on last STAY with STAY.STAYCLAS =
1/EligibleLTC.
Else CROSYY = EMPTY.
CROSMM:
If
RHMDDISP = 96/Complete and IRDISP = 92/ReadyToInterview and there is
a MD STAY ARRAY, use the MD STAY ARRAY for the following
calculations.
Else use the RH STAY ARRAY.
If RHDISP
= 94/MissingData or 96/Complete and SPDISP <> 11/FinalNonResp
and last chronological STAY is not in the target facility:
If
RH7-RHALIVE = 0/No and last chronological STAY has STAY.STAYCLAS =
3/Hospital and all STAYs after last STAY in target facility have
STAY.STAYCLAS = 3/Hospital
then CROSMM = EMPTY.
Else
CROSMM = STAY.STAYEMM on last STAY with STAY.STAYCLAS =
1/EligibleLTC.
Else CROSMM = EMPTY.
CROSDD:
If
RHMDDISP = 96/Complete and IRDISP = 92/ReadyToInterview and there is
a MD STAY ARRAY, use the MD STAY ARRAY for the following
calculations.
Else use the RH STAY ARRAY.
If RHDISP
= 94/MissingData or 96/Complete and SPDISP <> 11/FinalNonResp
and last chronological STAY is not in the target facility:
If
RH7-RHALIVE = 0/No and last chronological STAY has STAY.STAYCLAS =
3/Hospital and all STAYs after last STAY in target facility have
STAY.STAYCLAS = 3/Hospital
then CROSDD = EMPTY.
Else
CROSDD = STAY.STAYEDD on last STAY with STAY.STAYCLAS =
1/EligibleLTC.
Else CROSDD = EMPTY.
SPDISP:
If FQDISP = 7/CompleteIneligible then SPDISP =
11/FinalNonResp.
Else if RHDISP = 94/MissingData or 96/Complete
and RHMDDISP <> 96/Complete and
((SP is SSM and
RH7-RHALIVE = 0/No) or (SP is SSM and last chronological STAY is not
in
the target facility) or
(RH7-RHALIVE = 0/No and RH8 –
RHDODYY <> DK, RF and RH8 – RHDODYY <
PreloadSP.BEGCY)
or
(PreloadSP.BEGCY = current year and there are no STAYs in the
target facility with
STAY.STAYSYY or STAY.STAYEYY = current
year) or
(PreloadSP.EXITYY = current year and RH2A –
ADMITYY = current year))
then SPDISP = 11/FinalNonResp.
Else
if RHMDDISP = 96/Complete and (SP is SSM and RHM2-RHMALIVE = 0/No)
or
((RH7-RHALIVE = 0/No or RHM2 = RHMALIVE = 0/No) and RHM3 –
RHMDODYY <> DK, RF and RHM3 – RHMDODYY <
PreloadSP.BEGCY)) then SPDISP = 11/FinalNonResp.
BFOSDISP:
If
SPDISP = 11/FinalNonResp then BFOSDISP = 11/11-InitRefusal.
Else
if SPDISP = 12/CompleteDischargedAlive then BFOSDISP =
12/12-PartComplt.
Else if SPDISP = 40/CompleteAlive then
BFOSDISP = 40/40-Complete.
Else if SPDISP = 50/CompleteDeceased
then BFOSDISP = 50/50-CompleteDeceased.
Else if SPDISP =
60/CompleteExitCrossover then BFOSDISP =
60/60-CompleteCrossCusp.
USREFBEG:
If USDISP =
99/NotApplicable then PERS.USREFBEG = EMPTY.
Else if year
portion of PERS.RHREFBEG < PreloadSP.BEGCY then PERS.USREFBEG =
PreloadSP.BEGCY + “0101”.
Else PERS.USREFBEG =
PERS.RHREFBEG.
USREFEYY:
If USDISP =
99/NotApplicable then PERS.USREFEYY = EMPTY.
Else if CROSYY =
PreloadSP.EXITYY then PERS.USREFEYY = (PreloadSP.EXITYY – 1).
Else if CROSYY <> EMPTY then PERS.USREFEYY = CROSYY.
Else if PreloadSP.EXITYY = current year then PERS.USREFEYY =
(PreloadSP.EXITYY – 1).
Else PERS.USREFEYY = year
portion of PERS.RHREFEND.
USREFEMM:
If USDISP =
99/NotApplicable then PERS.USREFEMM = EMPTY.
Else if CROSYY =
PreloadSP.EXITYY then PERS.USREFEMM = “12”.
Else
if CROSYY <> EMPTY then PERS.USREFEMM = CROSMM.
Else if
PreloadSP.EXITYY = current year then PERS.USREFEMM = “12”.
Else PERS.USREFEMM = month portion of PERS.RHREFEND.
USREFEDD:
If USDISP = 99/NotApplicable then PERS.USREFEDD = EMPTY.
Else
if CROSYY = PreloadSP.EXITYY then PERS.USREFEDD = “31”.
Else if CROSYY <> EMPTY then PERS.USREFEDD = CROSDD.
Else if PreloadSP.EXITYY = current year then PERS.USREFEDD = “31”.
Else PERS.USREFEDD = day portion of PERS.RHREFEND.
PMREFBEG:
If PMDISP = 99/NotApplicable then PMREFBEG = EMPTY.
Else if
year portion of RHREFBEG < PreloadSP.BEGCY then
If
STAY.STAYSMM of first stay in target facility during PreloadSP.BEGCY
= DK or RF then PERS.PMREFBEG = PreloadSP.BEGCY + "01".
Else if STAY.STAYSYY of first stay in target facility during
PreloadSP.BEGCY = DK or RF and STAYSMM = 01 then PERS.PMREFBEG =
PreloadSP.BEGCY + "01".
Else if STAY.STAYSYY of
first stay in target facility during PreloadSP.BEGCY = DK or RF and
STAYSMM > 01 then PERS.PMREFBEG = PreloadSP.BEGCY + STAY.STAYSMM
of first stay in
target facility during
PreloadSP.BEGCY.
Else if SP was in the target facility for
at least one day in January of PreloadSP.BEGCY then: PERS.PMREFBEG =
PreloadSP.BEGCY + “01”.
Else PERS.PMREFBEG =
STAY.STAYSYY of first stay in target facility during PreloadSP.BEGCY
+ STAY.STAYSMM of same STAY.
Else if there are months from the
previous round that need PM data collected then
PERS.PMREFBEG = PreloadPM.PREFYYMM of first month from previous round
needing data collected.
Else if there are no months from the
previous round that need PM data collected then
PERS.PMREFBEG =
year portion of PERS.RHREFBEG + month portion of PERS.RHREFBEG.
MAXPMEND:
If PreloadSP.EXITYY = current year and year
portion of PERS.RHREFEND = current year then MAXPMEND =
(PreloadSP.EXITYY – 1) + “12”.
Else if
RH7-RHALIVE = 0/No then MAXPMEND = year and month portion of
PERS.RHREFEND.
Else MAXPMEND = year and month of last full
month prior to PERS.RHREFEND.
PMREFEND:
If PMDISP =
99/NotApplicable then PERS.PMREFEND = EMPTY.
Else if (CROSYY =
PreloadSP.EXITYY) or (current year = PreloadSP.EXITYY and CROSYY = DK
or RF) then:
Beginning with crossover STAY and working
backwards if necessary, position to most recent STAY in target
facility with STAYSYY <> current year. THEN:
If STAY.STAYEYY = current year then PERS.PMREFEND = MAXPMEND.
Else if STAY.STAYEMM <> DK, RF and STAYEMM >
current month then PERS.PMREFEND = (PreloadSP.EXITYY– 1) +
STAY.STAYEMM.
Else PERS.PMREFEND = MAXPMEND.
Else if CROSYY <> DK or RF then:
If CROSMM
<> DK or RF and RH7-RHALIVE = 0, then PERS.PMREFEND = CROSYY +
CROSMM.
Else if CROSYY = current year and CROSMM
<> current month, DK, RF, then PERS.PMREFEND = CROSYY +
CROSMM.
Else if CROSYY < current year and CROSMM
<> DK, RF, then PERS.PMREFEND = CROSYY + CROSMM.
Else if RH7-RHALIVE <> 0/No and CROSYY < current year,
then PERS.PMREFEND = CROSYY + “12”.
Else PERS.PMREFEND = MAXPMEND.
Else PERS.PMREFEND =
MAXPMEND.
If PERS.PMREFEND > MAXPMEND then
PERS.PMREFEND = MAXPMEND.
EXREFBEG:
If EXDISP
= 99/NotApplicable then PERS.EXREFBEG = EMPTY.
Else if
PreloadSP.EXREFBEG <> EMPTY, NULL then PERS.EXREFBEG =
PreloadSP.EXREFBEG.
Else if year portion of RHREFBEG <
PreloadSP.BEGCY then:
If SP was in the target facility on
January 1st of PreloadSP.BEGCY then
PERS.EXREFBEG =
PreloadSP.BEGCY + “0101”.
Else PERS.EXREFBEG =
STAY.STAYSYY + STAY.STAYSMM + STAY.STAYSDD of first STAY in target
facility where STAY.STAYSYY = PERS.BEGCY.
Else PERS.EXREFBEG =
PERS.RHREFBEG.
EXREFBIL:
If PreloadSP.EXREFBIL <>
EMPTY, NULL then PERS.EXREFBIL = PreloadSP.EXREFBIL.
Else
PERS.EXREFBIL = PERS.EXREFBEG.
MAXEXEND:
If
PreloadSP.EXITYY = current year and year portion of PERS.RHREFEND =
current year then MAXEXEND = (PreloadSP.EXITYY – 1) +
“1231”.
Else MAXEXEND =
PERS.RHREFEND.
EXREFEND:
If EXDISP =
99/NotApplicable then PERS.EXREFEND = EMPTY.
Else if (CROSYY =
PreloadSP.EXITYY) or (current year = PreloadSP.EXITYY and CROSYY = DK
or RF) then:
Beginning with crossover STAY and working
backwards if necessary, position to most recent STAY in target
facility with STAYSYY <> current year. THEN:
If
STAY.STAYEYY = current year then PERS.EXREFEND = MAXEXEND.
Else if STAY.STAYEMM <> DK, RF and STAYEMM > current
month then
If STAY.STAYEDD <> DK or RF,
then PERS.EXREFEND = (PreloadSP.EXITYY– 1) + STAY.STAYEMM +
STAY.STAYEDD.
Else PERS.EXREFEND =
(PreloadSP.EXITYY – 1) + STAY.STAYEMM + last calendar day of
STAYEMM.
Else PERS.EXREFEND = MAXEXEND.
Else
if CROSYY <> DK or RF then:
If CROSMM <>
DK or RF and CROSDD <> DK or RF, then PERS.EXREFEND = CROSYY +
CROSMM + CROSDD.
Else if CROSMM <> DK or RF,
then PERS.EXREFEND = CROSYY + CROSMM + last calendar day of CROSMM.
Else if RH7-RHALIVE <> 0/No and CROSYY < current
year then PERS.EXREFEND = CROSYY + “12”.
Else PERS.EXREFEND = MAXEXEND.
Else PERS.EXREFEND =
MAXEXEND.
If PERS.EXREFEND > MAXEXEND then
PERS.EXREFEND = MAXEXEND.
HS1REF:
If SP is a CFC or
SP is an SSM2 then HS1REF = RAD.
Else if SP is an SSM1 then
HS1REF = current year + ‘0901’.
HS2REF:
If
(SP is a CFC or SP is an SSM2) and RAD + 90 days < RHREFEND and SP
was in the target facility on RAD + 90 days, then HS2REF = RAD + 90
days.
Else if this is not a fall round and SP is a CFR and
PERSRNDC = previous round and PreloadSP.SUPPTYPE <> 1 and
PreloadSP.LASTHTYP = 1/B and RAD + 90 days < RHREFEND and SP was
in the target facility on RAD + 90 days, then HS2REF = RAD + 90
days.
Else if ([(SP is a CFC or SP is an SSM2) and RAD + 90 <
RHREFEND and SP was not in the target facility on RAD + 90 days] or
[this is not a fall round and SP is a CFR and PERSRNDC = previous
round and PreloadSP.SUPPTYPE <> 1/SSM1 and PreloadSP.LASTHTYP =
1/B and RAD + 90 < RHREFEND and SP was not in the target facility
on RAD + 90 days]) and RHDISP = 94/MissingData then HS2REF = DK.
Else
HS2REF = EMPTY.
HSYEAR:
If this is a fall round and
((PERS.RHDOI = EMPTY and month portion of current date [system date]
is 01) or (PERS.RHDOI <> EMPTY and month portion of PERS.RHDOI
= 01)), then HSYEAR = current year-1.
Else HSYEAR = current
year.
HSCREF:
If this is a fall round and SP is a CFR
and (RH7-RHALIVE <> 0/No) and CROSYY <> DK, RF, or EMPTY
and CROSMM <> DK, RF, or EMPTY and CROSDD <> DK, RF, or
EMPTY and (CROSYY + CROSMM + CROSDD < HSYEAR + "0901"),
then HSCREF = CROSYY + CROSMM + CROSDD.
Else if this is a fall
round and SP is a CFR and (RH7-RHALIVE <> 0/No or
RH7-RHALIVE
= 0/No and (DOD = empty or DOD > HSYEAR + "0901"))
then
HSCREF = HSYEAR + "0901".
Else if SP is a FCF or SP is
a FFC then HSCREF = RAD.
Else HSCREF = EMPTY.
FQDISP:
If
FQDISP <> 3/StartedNotComplete, 4/MissingData, 5/Complete, or
7/CompleteIneligible then FQDISP = 2/NotStarted.
RHDISP:
If
SPDISP = 11/FinalNonResp and RHDISP <> 96/Complete, then RHDISP
= 99/NotApplicable.
Else if FQDISP <> 4/MissingData or
5/Complete then RHDISP = 91/NotReady.
Else if RHDISP <>
94/MissingData or 96/Complete then RHDISP =
92/ReadyToInterview.
BQDISP:
If SPDISP =
11/FinalNonResp then BQDISP = 99/Not Applicable.
Else if
(BQDISP <> 1/ConsentRequired or 11/FinalConsentDenied or
4/InitialRefusal or 12/FinalRefusal), then:
If (SP is SSM or
SP is CFC) and RHDISP <> 94/MissingData or 96/Complete then
BQDISP = 91/NotReady.
Else if (SP is SSM or SP is CFC) and
RHDISP = 94/MissingData or 96/Complete and BQDISP <>
94/MissingData or 96/Complete then BQDISP = 92/ReadyToInterview.
Else if SP is CFR or SP is FCF or SP is FFC then BQDISP =
99/NotApplicable.
INDISP:
If SPDISP = 11/FinalNonResp
then INDISP = 99/Not Applicable.
Else if (INDISP <>
1/ConsentRequired or 11/FinalConsentDenied or 4/InitialRefusal or
12/FinalRefusal), then:
If (this is a fall round or SP is a
CFC or SP is a FCF or SP is a FFC) and RHDISP <>
94/MissingData or 96/Complete then INDISP = 91/NotReady.
Else
(if this is a fall round or SP is a CFC or SP is a FCF or SP is a
FFC) and RHDISP = 94/MissingData or 96/Complete and INDISP <>
96/Complete then INDISP = 92/ReadyToInterview.
Else if this is
not a fall round and SP is a CFR then INDISP =
99/Inapplicable.
HSDISP:
If SPDISP = 11/FinalNonResp
then HSDISP = 99/Not Applicable.
Else if (HSDISP <>
1/ConsentRequired or 11/FinalConsentDenied or 4/InitialRefusal or
12/FinalRefusal), then:
If this is a fall round and (RHDISP <>
94/MissingData or 96/Complete) and SP is not a CFR then HSDISP =
91/NotReady.
Else if this is a fall round and SP is not a CFR
and RHDISP = 94/MissingData or 96/Complete and HSDISP <>
99/NotApplicable and HSDISP <> 96/Complete then HSDISP =
92/ReadyToInterview.
Else if this is a fall round and SP is a
CFR and (RH7-RHALIVE <> 0/No or RH7-RHALIVE = 0/No and (DOD =
empty or DOD > current year + "0901"))and RHDISP =
94/MissingData or 96/Complete and HSDISP <> 96/Complete then
HSDISP = 92/ReadyToInterview.
Else if SP is CFC or SP is FCF or
SP is FFC or [SP is CFR and PERSRNDC = previous round and
PreloadSP.SUPPTYPE <> 1/SSM1 and PreloadSP.LASTHTYP = 1/B and
((CROSDATE <> EMPTY, NULL and CROSDATE >= RAD + 90 days) or
(CROSDATE = EMPTY, NULL and PERS.RHREFEND >= RAD + 90 days)) and
SP was in the target facility on RAD + 90 date] and RHDISP <>
94/MissingData or 96/Complete then HSDISP = 91/NotReady.
Else if
SP is CFC or SP is FCF or SP is FFC or [SP is CFR and PERSRNDC =
previous round and PreloadSP.SUPPTYPE <> 1/SSM1 and
PreloadSP.LASTHTYP = 1/B and ((CROSDATE <> EMPTY, NULL and
CROSDATE >= RAD + 90 days) or (CROSDATE = EMPTY, NULL and
PERS.RHREFEND >= RAD + 90 days)) and SP was in the target facility
on RAD + 90 date] and RHDISP = 94/MissingData or 96/Complete and
HSDISP <> 96/Complete then HSDISP = 92/ReadyToInterview.
Else
if this is not a fall round and SP is CFR and [(PreloadSP.LASTHTYP <>
1/B) or (PERSRNDC < previous round) or(PreloadSP.SUPPTYPE =
1/SSM1) or [PreloadSP.LASTHTYP = 1/B and PreloadSP.SUPPTYPE <>
1/SSM and ((CROSDATE <> EMPTY, NULL and CROSDATE < RAD + 90
days) or (CROSDATE = EMPTY, NULL and PERS.RHREFEND < RAD + 90
days)) or (SP not in the target facility on RAD + 90)]] then HSDISP =
99/NotApplicable.
Else if this is a fall found and SP is a CFR
and RH7-RHALIVE = 0/No and DOD <> EMPTY and DOD <= current
year + "0901" then HSDISP = 99/NotApplicable.
USDISP:
If
SPDISP = 11/FinalNonResp then USDISP = 99/Not Applicable.
Else
if (USDISP <> 1/ConsentRequired or 11/FinalConsentDenied or
4/InitialRefusal or 12/FinalRefusal), then:
If SP is an SSM
then USDISP = 99/NotApplicable.
Else if year portion of
(RHREFBEG + 1 day) = PreloadSP.EXITYY, then USDISP =
99/NotApplicable.
Else if RHDISP <> 94/MissingData or
96/Complete, then USDISP = 91/NotReady.
Else if RHDISP =
94/MissingData or 96/Complete and USDISP <> 96/Complete or
99/NotApplicablethen USDISP = 92/ReadyToInterview.
PMDISP:
If
SPDISP = 11/FinalNonResp then PMDISP = 99/Not Applicable.
Else
if SP is an SSM then PMDISP = 99/NotApplicable.
Else if year
portion of RHREFBEG = PreloadSP.EXITYY and there are no months from
the previous round that need PM data collected, then PMDISP = 99/Not
Applicable.
Else if RHDISP <> 94/MissingData or
96/Complete then PMDISP = 91/NotReady.
Else if RHDISP =
94/MissingData or 96/Complete and PMDISP <> 93/Breakoff or
94/MissingData or 96/Complete or 99/NotApplicable, then PMDISP =
92/ReadyToInterview.
EXDISP:
If SPDISP =
11/FinalNonResp then EXDISP = 99/Not Applicable.
Else if SP is
an SSM then EXDISP = 99/NotApplicable.
Else if PreloadSP.EXRETRV
= EMPTY and year porition of PreloadSP.EXREFBEG = PreloadSP.EXITYY,
then EXDISP = 99/NotApplicable.
Else if RHDISP <>
94/MissingData or 96/Complete then EXDISP = 91/NotReady.
Else if
RHDISP = 94/MissingData or 96/Complete and EXDISP <>
96/Complete or 99/NotApplicable, then EXDISP =
92/ReadyToInterview.
FQMDDISP:
If FQDISP <>
4/MissingData or (FQDISP = 4/MissingData and EXDISP =
99/NotApplicable), then FQMDDISP = 9/NotApplicable.
Else if
FQDISP = 4/MissingData and FQMDDISP <> 5/Complete and EXDISP =
91/NotReady or 92/ReadyToInterview, then FQMDDISP = 1/NotReady.
Else
if FQDISP = 4/MissingData and FQMDDISP <> 5/Complete and EXDISP
<> 91/NotReady, 92/ReadyToInterview, or 99/NotApplicable,
then FQMDDISP = 4/MissingData.
BQMDDISP:
If BQDISP
<> 94/MissingData then BQMDDISP = 99/NotApplicable.
Else
if BQDISP = 94/MissingData and BQMDDISP <> 96/Complete, then
BQMDDISP = 94/MissingData.
RHMDDISP:
If RHDISP <>
94/MissingData then RHMDDISP = 99/NotApplicable.
Else if RHDISP
= 94/MissingData and RHMDDISP <> 96/Complete and EXDISP =
91/NotReady or 92/ReadyToInterview or 99/NotApplicable and USDISP =
91/NotReady or 92/ReadyToInterview or 99/NotApplicable and PMDISP =
91/NotReady or 92/ReadyToInterview or 99/NotApplicable and ((HSDISP =
91/NotReady or 92/ReadyToInterview or 99/NotApplicable or (HSDISP <>
91/NotReady or 92/ReadyToInterview or 99/NotApplicable and HS2REF <>
DK)) then RHMDDISP = 91/NotReady.
Else if RHDISP =
94/MissingData and RHMDDISP <> 96/Complete and EX is started or
US is started or PM is started or (HS is started and HS2REF = DK)
then RHMDDISP = 94/MissingData.
IRDISP:
If SPDISP =
11/FinalNonResp then IRDISP = 99/Not Applicable.
Else if (FQDISP
= 5/Complete or FQMDDISP = 5/Complete) and (RHDISP = 96/Complete or
RHMDDISP = 96/Complete) and (BQDISP = 11/FinalConsentDenied or
12/FinalRefusal or 96/Complete or 99/NotApplicable or BQMDDISP =
96/Complete) and (INDISP = 11/FinalConsentDenied or 12/FinalRefusal
or 96/Complete or 99/NotApplicable) and (HSDISP =
11/FinalConsentDenied or 12/FinalRefusal or 96/Complete or
99/Inapplicable) and (USDISP = 11/FinalConsentDenied or
12/FinalRefusal or 96/Complete or 99/NotApplicable) and (EXDISP =
96/Complete or 99/NotApplicable) and (PMDISP = 96/Complete or
99/NotApplicable) and IRDISP <> 96/Complete then IRDISP =
92/ReadyToInterview.
Else if IRDISP <> 92/ReadyToInterview
or 96/Complete then IRDISP = 91/NotReady.
Variable Name |
Assignment Instructions |
|
|
Design Notes
Upon
completion, RH should be considered complete but not locked from
access.
When US, HS, PM or EX is started (if user answers the
first question of one of the sections), the RH section should be
locked and is no available on the navigator.
US, HS, PM,
and EX should be accessible after RH has been completed, but prior to
locking the section and making it unavailable.
Question Text
Admission
Date: (NAV ADMISSION DATE)
Vital Status: (VITAL STATUS)
SELECT THE SECTION YOU WOULD LIKE TO COMPLETE FOR (SP).
Field 1: NAVIGATE
Field 1 Routing
Value |
Label |
Route |
1 |
FACILITY QUESTIONNAIRE (FQ) |
NAV2 - RESPOND |
2 |
RESIDENCE HISTORY (RH) |
NAV2 - RESPOND |
3 |
BACKGROUND QUESTIONNAIRE (BQ) |
NAV2 - RESPOND |
4 |
INSURANCE (IN) |
NAV2 - RESPOND |
5 |
HEALTH STATUS (HS) |
NAV2 - RESPOND |
6 |
HEALTHCARE UTILIZATION (US) |
NAV2 - RESPOND |
7 |
PRESCRIBED MEDICINE (PM) |
NAV2 - RESPOND |
8 |
EXPENDITURES (EX) |
NAV2 - RESPOND |
9 |
MISSING DATA FOR FACILITY QUESTIONNAIRE |
NAV2 - RESPOND |
10 |
MISSING DATA FOR RESIDENCE HISTORY |
NAV2 - RESPOND |
11 |
MISSING DATA FOR BACKGROUND QUESTIONNAIRE |
NAV2 - RESPOND |
12 |
INTERVIEWER REMARKS QUESTIONNAIRE (IR) |
BOX NAV1 |
13 |
RETURN TO IMS |
BOX NAVEND |
Other Programming Instructions
Report Display
Display
report above question text.
Display status of each
section.
Report header: STATUS
Report layout:
Column
1: If FQDISP = 5/Complete display “C”. Else if FQDISP =
4/MissingData display “MD”. Else display “RDY”.
Column
2: If RHDISP = 96/Complete display “C”. Else if RHDISP =
94/MissingData display “MD”. Else if RHDISP =
92/ReadyToInterview display “RDY”.
Else display
“NA”.
Column 3: If BQDISP = 96/Complete display “C”.
Else if BQDISP = 94/MissingData display “MD”. Else if
BQDISP = 92/ReadyToInterview display “RDY”. Else if
BQDISP = 1/ConsentRequired display "CR". Else if BQDISP =
11/FinalConsentDenied display "FCD". Else if BQDISP =
4/InitialRefusal display "IRF". Else if BQDISP =
12/FinalRefusal display "FRF". Else display "NA".
Column
4: If INDISP = 96/Complete display “C”. Else if INDISP =
92/ReadyToInterview display “RDY”. Else if INDISP =
1/ConsentRequired display "CR". Else if INDISP =
11/FinalConsentDenied display "FCD". Else if INDISP =
4/InitialRefusal display "IRF". Else if INDISP =
12/FinalRefusal display "FRF".
Else display
“NA”.
Column 5: If HSDISP = 96/Complete display “C”.
Else if HSDISP = 92/ReadyToInterview display “RDY”. Else
if HSDISP = 1/ConsentRequired display "CR". Else if HSDISP
= 11/FinalConsentDenied display "FCD". Else if HSDISP =
4/InitialRefusal display "IRF". Else if HSDISP =
12/FinalRefusal display "FRF".Else display “NA”.
Column
6: If USDISP = 96/Complete display “C”. Else if USDISP =
92/ReadyToInterview display “RDY”. Else if USDISP =
1/ConsentRequired display "CR". Else if USDISP =
11/FinalConsentDenied display "FCD". Else if USDISP =
4/InitialRefusal display "IRF". Else if USDISP =
12/FinalRefusal display "FRF".Else display “NA”.
Column
7: If PMDISP = 96/Complete display “C”. Else if PMDISP =
92/ReadyToInterview display “RDY”. Else if PMDISP =
91/NotReady or 99/NotApplicable display “NA”. Else
display “BRK”.
Column 8: If EXDISP = 96/Complete
display “C”. Else if EXDISP = 92/ReadyToInterview display
“RDY”. Else display “NA”.
Column 9: If
FQMDDISP = 5/Complete display “C”. Else if FQMDDISP =
4/MissingData display “RDY”. Else display “NA”.
Column
10: If RHMDDISP = 96/Complete, display "C". Else if
RHMDDISP = 94/MissingData, display “RDY”. Else display
“NA”.
Column 11: If BQMDDISP = 96/Complete display
“C”. Else if BQMDDISP = 94/MissingData display “RDY”.
Else display “NA”.
Column 12: If IRDISP =
96/Complete display “C”. Else if IRDISP =
92/ReadyToInterview display “RDY”. Else display “NA”.
Background Variable Assignments
Variable Name |
Assignment Instructions |
RHCLOSED |
If NAV1-NAVIGATE = 5/HS or 6/US or 7/PM or 8/EX or 10/RH_MD, then RHCLOSED = 1/Indicated. |
Design Notes
Display all section names, restricting access to unavailable sections based on technical notes related to availability.
Question Text
SELECT A RESPONDENT BELOW OR ADD TO THE PERSON ROSTER.
PRESS "CTRL/R" TO ADD A RESPONDENT TO THE PERSON ROSTER.
Field 1: RESPOND
Field 1 Routing
Value |
Label |
Route |
1 |
[Continuous answer.] |
BOX NAV1 |
Other Programming Instructions
Background Variable Assignments
Variable Name |
Assignment Instructions |
FQRESP |
If NAV1 - NAVIGATE = 1/FQ or 9/FQ_MD, then FACR.FQRESP = current round |
RHRESP |
If NAV1 - NAVIGATE = 2/RH or 10/RH_MD, then FACR.RHRESP = current round |
BQRESP |
If NAV1 - NAVIGATE = 3/BQ or 11/BQ_MD, then FACR.BQRESP = current round |
INRESP |
If NAV1 - NAVIGATE = 4/IN, then FACR.INRESP = current round |
HSRESP |
If NAV1 - NAVIGATE = 5/HS, then FACR.HSRESP = current round |
USRESP |
If NAV1 - NAVIGATE = 6/US, then FACR.USRESP = current round |
PMRESP |
If NAV1 - NAVIGATE = 7/PM, then FACR.PMRESP = current round |
EXRESP |
If NAV1 - NAVIGATE = 8/EX, then FACR.EXRESP = current round |
XFAFFACR |
If NAV1 - NAVIGATE = 1/FQ, then PERS.XFAFFACR = FACRNUM |
XFAPFACRFQMD |
If NAV1 - NAVIGATE = 9/FQ_MD then PERS.XFAPFACRFQMD = FACRNUM |
XFAPFACRRH |
If NAV1 - NAVIGATE = 2/RH then PERS.XFAPFACRRH = FACRNUM |
XFAPFACRRHMD |
If NAV1 - NAVIGATE = 10/RH_MD then PERS.XFAPFACRRHMD = FACRNUM |
XFAPFACRBQ |
If NAV1 - NAVIGATE = 3/BQ then PERS.XFAPFACRBQ = FACRNUM |
XFAPFACRBQMD |
If NAV1 - NAVIGATE = 11/BQ_MD then PERS.XFAPFACRBQMD = FACRNUM |
XFAPFACRIN |
If NAV1 - NAVIGATE = 4/IN then PERS.XFAPFACRIN = FACRNUM |
XFAPFACRHS |
If NAV1 - NAVIGATE = 5/HS then PERS.XFAPFACRHS = FACRNUM |
XFAPFACRUS |
If NAV1 - NAVIGATE = 6/US then PERS.XFAPFACRUS = FACRNUM |
XFAPFACRPM |
If NAV1 - NAVIGATE = 7/PM then PERS.XFAPFACRPM = FACRNUM |
XFAPFACREX |
If NAV1 - NAVIGATE = 8/EX then PERS.XFAPFACREX = FACRNUM |
Design Notes
Need to add lookup descriptions.
Box Instructions
IF NAV1 - NAVIGATE = 1/FQ, GO TO BOX FQ1.
IF NAV1 - NAVIGATE = 2/RH, GO TO BOX RHBEG.
IF NAV1 - NAVIGATE = 3/BQ, GO TO BOX BQBEG.
IF NAV1 - NAVIGATE = 4/IN, GO TO BOX INBEG.
IF NAV1 - NAVIGATE = 5/HS, GO TO BOX HSBEG.
IF NAV1 - NAVIGATE = 6/US, GO TO BOX USBEG.
IF NAV1 - NAVIGATE = 7/PM, GO TO BOX PMBEG.
IF NAV1 - NAVIGATE = 8/EX, GO TO BOX EXS1.
IF NAV1 - NAVIGATE = 9/FQ_MD, GO TO BOX FQMBEG.
IF NAV1 - NAVIGATE = 10/RH_MD, GO TO BOX RHMBEG.
IF NAV1 - NAVIGATE = 11/BQ_MD, GO TO BOX BQMBEG.
ELSE GO TO BOX IRQBEG.
Box Instructions
RETURN TO IMS
| File Type | application/vnd.openxmlformats-officedocument.wordprocessingml.document |
| Author | Ryan Hubbard |
| File Modified | 0000-00-00 |
| File Created | 2021-01-23 |