Download:
pdf |
pdfFederal Register / Vol. 82, No. 129 / Friday, July 7, 2017 / Notices
the scope of analysis for the NPL Draft
EIS.
All alternatives conform to the PFO
Resource Management Plan Record of
Decision (2008) and the RSFO Green
River Resource Management Plan
Record of Decision (1997) as well as the
Record of Decision and Approved
Resource Management Plan
Amendments for the Rocky Mountain
Region, Including the Greater SageGrouse Sub-Region of Wyoming (2015).
Before including your address, phone
number, email address, or other
personal identifying information in your
comment, you should be aware that
your entire comment—including your
personal identifying information—may
be made publicly available at any time.
While you can ask us in your comment
to withhold your personal identifying
information from public review, we
cannot guarantee that we will be able to
do so.
Authority: 40 CFR 1506.6 and 40 CFR
1506.10
Mary Jo Rugwell,
BLM Wyoming State Director.
[FR Doc. 2017–14130 Filed 7–6–17; 8:45 am]
BILLING CODE 4310–22–P
DEPARTMENT OF THE INTERIOR
Bureau of Safety and Environmental
Enforcement
[Docket ID BSEE–2017–0003; OMB Control
Number 1014–0018; 17XE1700DX
EEEE500000 EX1SF0000.DAQ000]
Agency Information Collection
Activities: OMB Control Number 1014–
0018; Oil and Gas Drilling Operations
ACTION:
Notice; request for comments.
To comply with the
Paperwork Reduction Act of 1995
(PRA), the Bureau of Safety and
Environmental Enforcement (BSEE) is
inviting comments on a collection of
information that we will submit to the
Office of Management and Budget
(OMB) for review and approval. The
information collection request (ICR)
concerns a renewal to the paperwork
requirements in BSEE’s regulations
concerning Oil and Gas Drilling
Operations.
DATES: You must submit comments by
September 5, 2017.
ADDRESSES: You may submit comments
by either of the following methods listed
below.
• Electronically go to http://
www.regulations.gov. In the Search box,
enter BSEE–2017–0003 then click
search. Follow the instructions to
asabaliauskas on DSKBBXCHB2PROD with NOTICES
SUMMARY:
VerDate Sep<11>2014
20:56 Jul 06, 2017
Jkt 241001
submit public comments and view all
related materials. We will post all
comments.
• Email [email protected], fax
(703) 787–1546, or mail or hand-carry
comments to the Department of the
Interior; Bureau of Safety and
Environmental Enforcement;
Regulations and Standards Branch;
ATTN: Nicole Mason; 45600 Woodland
Road, Sterling, VA 20166. Please
reference ICR 1014–0018 in your
comment and include your name and
return address.
FOR FURTHER INFORMATION CONTACT:
Nicole Mason, Regulations and
Standards Branch, (703) 787–1607, to
request additional information about
this ICR.
SUPPLEMENTARY INFORMATION:
Title: 30 CFR part 250, subpart D, Oil
and Gas Drilling Operations.
Form(s): BSEE–0125, BSEE–0133, and
BSEE–0133S.
OMB Control Number: 1014–0018.
Abstract: The Outer Continental Shelf
(OCS) Lands Act (OCSLA) at 43 U.S.C.
1334 authorizes the Secretary of the
Interior to prescribe rules and
regulations necessary for the
administration of the leasing provisions
of that Act related to mineral resources
on the OCS. Such rules and regulations
will apply to all operations conducted
under a lease, right-of-way, or a right-ofuse and easement. Operations on the
OCS must preserve, protect, and
develop oil and natural gas resources in
a manner that is consistent with the
need to make such resources available
to meet the Nation’s energy needs as
rapidly as possible; to balance orderly
energy resource development with
protection of human, marine, and
coastal environments; to ensure the
public a fair and equitable return on the
resources of the OCS; and to preserve
and maintain free enterprise
competition.
In addition to the general rulemaking
authority of the OCSLA at 43 U.S.C.
1334, section 301(a) of the Federal Oil
and Gas Royalty Management Act
(FOGRMA), 30 U.S.C. 1751(a), grants
authority to the Secretary to prescribe
such rules and regulations as are
reasonably necessary to carry out
FOGRMA’s provisions. While the
majority of FOGRMA is directed to
royalty collection and enforcement,
some provisions apply to offshore
operations. For example, section 108 of
FOGRMA, 30 U.S.C. 1718, grants the
Secretary broad authority to inspect
lease sites for the purpose of
determining whether there is
compliance with the mineral leasing
laws. Section 109(c)(2) and (d)(1), 30
PO 00000
Frm 00082
Fmt 4703
Sfmt 4703
31629
U.S.C. 1719(c)(2) and (d)(1), impose
substantial civil penalties for failure to
permit lawful inspections and for
knowing or willful preparation or
submission of false, inaccurate, or
misleading reports, records, or other
information. Because the Secretary has
delegated some of the authority under
FOGRMA to the Bureau of Safety and
Environmental Enforcement (BSEE), 30
U.S.C. 1751 is included as additional
authority for these requirements.
On November 2, 2015, the President
signed into law the Federal Civil
Penalties Inflation Adjustment Act
Improvements Act of 2015 (Sec. 701 of
Pub. L. 114–74) (FCPIA of 2015). The
OCSLA directs the Secretary of the
Interior to adjust the OCSLA maximum
civil penalty amount at least once every
three years to reflect any increase in the
Consumer Price Index (CPI) to account
for inflation (43 U.S.C. 1350(b)(1)). The
FCPIA of 2015 requires Federal agencies
to adjust the level of civil monetary
penalties with an initial ‘‘catch-up’’
adjustment, if warranted, through
rulemaking and then to make
subsequent annual adjustments for
inflation. The purpose of these
adjustments is to maintain the deterrent
effect of civil penalties and to further
the policy goals of the underlying
statutes.
These authorities and responsibilities
are among those delegated to BSEE. The
regulations at 30 CFR part 250, subpart
D, concern oil and gas drilling
requirements and are the subject of this
collection. This request also covers
related Notices to Lessees and Operators
(NTLs) that BSEE issues to clarify,
supplement, or provide additional
guidance on some aspects of our
regulations.
BSEE uses the information collected
under subpart D to ensure safe drilling
operations and to protect the human,
marine, and coastal environment.
Among other things, BSEE specifically
uses the information to ensure: The
drilling unit is fit for the intended
purpose; the lessee or operator will not
encounter geologic conditions that
present a hazard to operations;
equipment is maintained in a state of
readiness and meets safety standards;
each drilling crew is properly trained
and able to promptly perform wellcontrol activities at any time during
well operations; compliance with safety
standards; and the current regulations
will provide for safe and proper field or
reservoir development, resource
evaluation, conservation, protection of
correlative rights, safety, and
environmental protection. We also
review well records to ascertain whether
drilling operations have encountered
E:\FR\FM\07JYN1.SGM
07JYN1
31630
Federal Register / Vol. 82, No. 129 / Friday, July 7, 2017 / Notices
hydrocarbons or H2S and to ensure that
H2S detection equipment, personnel
protective equipment, and training of
the crew are adequate for safe
operations in zones known to contain
H2S and zones where the presence of
H2S is unknown.
The current subpart D regulations
specify the use of forms BSEE–0125
(End of Operations Report), and BSEE–
0133/0133S (Well Activity Report). The
information on BSEE–0125 is used to
ensure that industry has accurate and
up-to-date data and information on
wells and leasehold activities under
their jurisdiction and to ensure
compliance with approved plans and
any conditions placed upon a
suspension or temporary probation. It is
also used to evaluate the remedial
action in the event of well equipment
failure or well control loss. Form BSEE–
0125 is updated and resubmitted in the
event the well status changes. In
addition, except for proprietary data,
BSEE is required by the OCS Lands Act
to make available to the public certain
information submitted on BSEE–0125.
The BSEE uses the information on
BSEE–0133/0133S to monitor the
conditions of a well and status of
drilling operations. We review the
information to be aware of the well
conditions and current drilling activity
(i.e., well depth, drilling fluid weight,
casing types and setting depths,
completed well logs, and recent safety
equipment tests and drills). The
engineer uses this information to
determine how accurately the lessee
anticipated well conditions and if the
lessee or operator is following the other
approved forms that were submitted.
With the information collected on
BSEE–0133 available, the reviewers can
analyze the proposed revisions (e.g.,
revised grade of casing or deeper casing
setting depth) and make a quick and
informed decision on the request.
Some responses are mandatory and
some are required to obtain or retain a
benefit. No questions of a sensitive
nature are asked. BSEE will protect any
confidential commercial or proprietary
information according to the Freedom of
Information Act (5 U.S.C. 552) and
DOI’s implementing regulations (43 CFR
part 2); section 26 of OCSLA (43 U.S.C.
1352); 30 CFR 250.197, Data and
information to be made available to the
public or for limited inspection; and 30
CFR part 252, OCS Oil and Gas
Information Program.
Frequency: On occasion, monthly,
semi-annually, annually, and as a result
of situations encountered depending
upon the requirements.
Description of Respondents: Potential
respondents comprise Federal OCS oil,
gas, or sulfur lessees and/or operators
and holders of pipeline rights-of-way.
Estimated Reporting and
Recordkeeping Hour Burden: The
currently approved annual reporting
burden for this collection is 102,497
hours. The following chart details the
individual components and estimated
hour burdens. In calculating the
burdens, we assumed that respondents
perform certain requirements in the
normal course of their activities. We
consider these to be usual and
customary and took that into account in
estimating the burden.
asabaliauskas on DSKBBXCHB2PROD with NOTICES
BURDEN BREAKDOWN
Reporting and recordkeeping requirement *
400–490 ............................
Apply for use of alternative procedures and/or departures not requested in BSEE forms (including
discussions with BSEE or oral approvals).
404 ....................................
Perform operational check of crown block safety device; record results (weekly).
408–418, 420(a)(7);
423(b)(3), (c); 449(j), (k);
456(j); plus in subparts
A, B, D, E, G, H, P, Q.
Submit Application for Permit to Drill (APD Form
BSEE–0123 and BSEE–0123S) that includes any/
all supporting documentation and requests for
various approvals required in subpart D (including
§§ 250.425(a), 427, 428, 432, 447(c), 448(b),(c),
451(g), 460, 462(c), 470, 490(c)) and submitted
via the form; upon request, make available to
BSEE.
Burden covered under 1014–0025.
0
410(b) ................................
Reference Well and site-specific information approved in your Exploration Plan, Development
and Production Plan, Development Operations
Coordination Document in your APD.
Burdens pertaining to EPs, DPPs, DOCDs
are covered under BOEM 1010–0151
and APDs are covered under 1014–
0025.
0
418(e) ................................
Submit welding and burning plan according to 30
CFR 250, subpart A.
Burden covered under 1014–0022.
0
420(b)(3); 423(b)(7);
465(a), (b)(3); plus various ref in A, D, E, F, G,
P, and Q.
Submit Form BSEE–0125, End of Operations Report (EOR), and additional supporting information
as required by the cited regulations; and any additional information required by the District Manager.
3 .....................
BSEE–0125 279 submittals.
837
420(b)(3) ...........................
Submit dual mechanical barrier documentation after
installation on form BSEE–0125.
0.75 ................
533 submittals .................
400
420(b)(3) ...........................
Request approval for alternative options to installing
barriers.
0.25 ................
58 requests ......................
15
VerDate Sep<11>2014
20:56 Jul 06, 2017
Jkt 241001
PO 00000
Frm 00083
Fmt 4703
Sfmt 4703
Average number of
annual responses
Annual burden
hours
(rounded)
Citation 30 CFR part 250,
subpart D and NTL(s)
Hour burden
Burden covered under 1014–0022.
0.25 ................
86 drilling rigs × 52 weeks
= 4,472 records.
E:\FR\FM\07JYN1.SGM
07JYN1
0
1,118
Federal Register / Vol. 82, No. 129 / Friday, July 7, 2017 / Notices
31631
asabaliauskas on DSKBBXCHB2PROD with NOTICES
BURDEN BREAKDOWN—Continued
Annual burden
hours
(rounded)
Citation 30 CFR part 250,
subpart D and NTL(s)
Reporting and recordkeeping requirement *
Hour burden
Average number of
annual responses
421(b) ................................
Alaska only: Discuss the cement fill level with the
District Manager.
1 .....................
1 discussion .....................
421(f) .................................
Submit and receive approval if unable to cement
500 ft above previous shoe.
423(a) ................................
Request and receive approval from District Manager
for repair.
0.5 ..................
86 requests ......................
43
423(c)(2) ...........................
Document all test results pressure test and make
them available to BSEE upon request.
05 ...................
300 results .......................
150
427(a) ................................
Record results of all pressure integrity tests and
hole behavior observations re-formation integrity
and pore pressure.
2 .....................
4,226 record results .........
8,452
428(c)(3); 428(k); ref in
subparts A, D, G.
In the GOM OCS Region, submit drilling activity reports weekly (District Manager may require more
frequent submittals) on Forms BSEE–0133 (Well
Activity Report (WAR)) and BSEE–0133S (Bore
Hole Data) with supporting documentation.
1 .....................
4,160 submittals ..............
4,160
428(c)(3); 428(k); ref in A,
D, G.
In the Pacific and Alaska Regions during drilling operations, submit daily drilling reports on Forms
BSEE–0133 (Well Activity Report (WAR)) and
BSEE–0133S (Bore Hole Data) with supporting
documentation.
1 .....................
14 wells × 365 days ×
20% year = 1,022.
1,022
428(d) ................................
Submit all remedial actions for review and approval
by District Manager (before taking action); and
any other requirements of the District Manager.
5 .....................
1,000 submittals ..............
5,000
428(d) ................................
Submit descriptions of completed immediate actions
to District Manager and any other requirements of
the District Manager.
5 .....................
564 submittals .................
2,820
428(d) ................................
Submit PE certification of any proposed changes to
your well program; and any other requirements of
the District Manager.
4 .....................
450 submittals .................
1,800
428(k) ................................
Maintain daily drilling report (cementing requirements).
0.5 ..................
75 reports ........................
38
428(k) ................................
If cement returns are not observed, contact the District Manager to obtain approval before continuing
with operations.
1 .....................
10 requests ......................
10
434 ....................................
Record time, date & results of all diverter actuations
& tests (average 2 per drilling operation); retain all
charts/reports relating to diverter tests/actuations
at facility for duration of drilling well.
2 .....................
620 records ......................
1,240
452(a), (b) .........................
Immediately transmit real-time data gathering and
monitoring to record, store, and transmit data relating to the BOP control system, fluid handling,
downhole conditions; prior to well operations, notify BSEE of monitoring location and make data
available to BSEE upon request.
12 ...................
1 transmittal .....................
12
452(b) ................................
Store and monitor all information relating to
§ 250.452(a); make data available to BSEE upon
request.
1 .....................
2 wells × 138 drilling days
= 276.
........................
.
452(b) ................................
456(b), (i) ..........................
VerDate Sep<11>2014
Store and retain all monitoring records per requirements of §§ 250.740 and 250.741.
Document/record in the driller’s report every time
you circulate drilling fluid; results of drilling fluid
tests.
20:56 Jul 06, 2017
Jkt 241001
PO 00000
Frm 00084
Fmt 4703
Sfmt 4703
Burden covered under 1014–0022.
Burden covered under 1014–0028.
1 .....................
4,160 records ...................
E:\FR\FM\07JYN1.SGM
07JYN1
1
0
0
4,160
31632
Federal Register / Vol. 82, No. 129 / Friday, July 7, 2017 / Notices
asabaliauskas on DSKBBXCHB2PROD with NOTICES
BURDEN BREAKDOWN—Continued
Annual burden
hours
(rounded)
Citation 30 CFR part 250,
subpart D and NTL(s)
Reporting and recordkeeping requirement *
Hour burden
Average number of
annual responses
456(c), (f) ..........................
Perform various calculations; post calculated drill
pipe, collar, and drilling fluid volume; as well as
maximum pressures.
1 .....................
4,259 postings .................
4,259
458(b) ................................
Record daily drilling fluid and materials inventory in
drilling fluid report.
0.5 ..................
30,295 records .................
15,148
459(a)(3) ...........................
Request exception to procedure for protecting negative pressure area.
Burden included under 1014–0022.
0
460 ....................................
Submit plans and obtain approval to conduct well
test; notify BSEE before test (APD Form BSEE–
0123).
Burden covered under 1014–0025.
0
460; 465; plus in A, D, E,
F, G, H, P, and Q.
Provide revised plans and the additional supporting
information required by the cited regulations when
you submit an Application for Permit to Modify
(APM) (Form BSEE–0124) to BSEE for approval;
or a Revised APM.
Burden covered under 1014–0026.
0
461(a–b); 466(e); 468(a);
NTL.
Record and submit well logs and surveys run in the
wellbore and/or charts of well logging operations
(including but not limited to).
Record and submit directional and vertical-well surveys.
Record and submit velocity profiles and surveys ......
Record and submit core analyses .............................
3 .....................
302 logs/surveys ..............
906
1 .....................
302 reports ......................
302
1 .....................
1 .....................
45 reports ........................
130 analyses ...................
45
130
461(e) ................................
Provide copy of well directional survey to affected
leaseholder.
0.75 ................
11 occasions ....................
9
462(c) ................................
NEW: Submit a description of source control and
containment capabilities and all supporting information for approval.
8 .....................
150 submittals .................
1,200
462(d) ................................
NEW: Request re-evaluation of your source containment capabilities from the District Manager and
Regional Supervisor.
1 .....................
600 requests ....................
600
462(e)(1) ...........................
NEW: Notify BSEE 21 days prior to pressure testing; witness by BSEE and BAVO.
0.5 ..................
150 notifications ...............
75
463(b) ................................
Request field drilling rules be established, amended,
or canceled.
4 .....................
6 requests ........................
24
465 ....................................
Obtain approval to revise your drilling plan or
change major drilling equipment by submitting a
revised BSEE–0124, Application for Permit to
Modify and BSEE–0125, End of Operations Report.
Burden covered under 1014–0026 & 1014–
0028.
0
470(a); 418 .......................
Submit detailed descriptions of environmental, meteorologic, and oceanic conditions expected at well
site(s); how drilling unit, equipment, and materials
will be prepared for service; how the drilling unit
will be in compliance with § 250.713.
20 ...................
1 submittal .......................
20
470(b); 418 .......................
Submit detailed description of transitioning rig from
being underway to drilling and vice versa.
4 .....................
2 each well-underway to
drilling; drilling to underway = 4.
16
470(b); 418 .......................
Submit detailed description of any anticipated repair
and maintenance plans for the drilling unit and
equipment.
2 .....................
2 submittals .....................
4
470(c); 418 ........................
Submit well specific drilling objectives, timelines,
and updated contingency plans etc., for temporary
abandonment.
4 .....................
2 submittals .....................
8
VerDate Sep<11>2014
20:56 Jul 06, 2017
Jkt 241001
PO 00000
Frm 00085
Fmt 4703
Sfmt 4703
E:\FR\FM\07JYN1.SGM
07JYN1
Federal Register / Vol. 82, No. 129 / Friday, July 7, 2017 / Notices
31633
BURDEN BREAKDOWN—Continued
Reporting and recordkeeping requirement *
Hour burden
Average number of
annual responses
470(d); 418 .......................
Submit detailed description concerning weather and
ice forecasting for all phases; including how to ensure continuous awareness of weather/ice hazards at/between each well site; plans for managing ice hazards and responding to weather
events; verification of capabilities.
12 ...................
1 submittal .......................
12
470(e); 418; 472 ...............
Submit a detailed description of compliance with relief rig plans.
140 .................
1 description ....................
140
470(f); 471(c); 418 ............
SCCE capabilities; submit equipment statement
showing capable of controlling WCD; detailed description of your or your contractor’s SCCE capabilities including operating assumptions and limitations; inventory of local and regional supplies and
services, along with supplier relevant information;
proof of contract or agreements for providing
SCCE or supplies, services; detailed description
of procedures for inspecting, testing, and maintaining SCCE; and detailed description of your
plan ensuring all members of the team operating
SCCE have received training to deploy and operate, include dates of prior and planned training.
60 ...................
2 submittals .....................
120
470(g); 418 .......................
Submit a detailed description of utilizing best practices of API RP 2N during operations.
20 ...................
1 submittal .......................
20
471(c); 470(f); 465(a) ........
Submit with your APM, a reevaluation of your SCCE
capabilities if well design changes; include any
new WCD rate and demonstrate that your SCCE
capabilities will comply with § 250.470(f).
10 ...................
2 submittals .....................
20
471(e) ................................
Maintain all SCCE testing, inspection, and maintenance records for at least 10 years; make available to BSEE upon request.
20 ...................
2 records ..........................
40
471(f) .................................
Maintain all records pertaining to use of SCCE during testing, training, and deployment activities for
at least 3 years; make available to BSEE upon request.
20 ...................
2 records ..........................
40
490(c), (d) .........................
Submit request for reclassification of H2S zone; notify BSEE if conditions change.
490(f); also in 418(d) ........
Submit contingency plans for operations in H2S
areas (16 drilling, 6 work-over, 6 production).
30 ...................
28 plans ...........................
840
490(g) ................................
Post safety instructions; document training; retain
records at facility where employee works; train on
occasion and/or annual refresher (approx. 2/year).
4 .....................
34 records ........................
136
490(h)(2) ...........................
Document and retain attendance for weekly H2S
drills and monthly safety mtgs until operations
completed or for 1 year for production facilities at
nearest field office.
2 .....................
2,514 records ...................
5,028
490(i) .................................
490(j)(7–8) ........................
asabaliauskas on DSKBBXCHB2PROD with NOTICES
Annual burden
hours
(rounded)
Citation 30 CFR part 250,
subpart D and NTL(s)
Burden covered under 1014–0025.
Display warning signs—no burden as facilities would display warning signs and use other visual
and audible systems.
Record H2S detection and monitoring sensors during drilling testing and calibrations; make available
upon request.
4 .....................
4,328 records ...................
0
0
17,312
490(j)(12) ..........................
Propose alternatives to minimize or eliminate SO2 hazards—submitted with contingency plans—
burden covered under § 250.490(f).
0
490(j)(13) (vi) ....................
Label breathing air bottles—no burden as supplier normally labels bottles; facilities would routinely
label if not.
0
490(l) .................................
Notify without delay of unplanned H2S releases
(approx. 2/year).
5
VerDate Sep<11>2014
20:56 Jul 06, 2017
Jkt 241001
PO 00000
Frm 00086
Fmt 4703
Sfmt 4703
Oral ................
0.2 ..................
24 notifications .................
E:\FR\FM\07JYN1.SGM
07JYN1
31634
Federal Register / Vol. 82, No. 129 / Friday, July 7, 2017 / Notices
BURDEN BREAKDOWN—Continued
Citation 30 CFR part 250,
subpart D and NTL(s)
Reporting and recordkeeping requirement *
Annual burden
hours
(rounded)
Hour burden
Average number of
annual responses
Written 5 ........
24 written reports .............
120
2 .....................
490(o)(5) ...........................
Request approval to use drill pipe for well testing ....
4 requests ........................
8
490(q)(1) ...........................
Seal and mark for the presence of H2S cores to be transported—no burden as facilities would routinely mark transported cores.
0
490(q)(9) ...........................
Request approval to use gas containing H2S for instrument gas.
2 .....................
2 requests ........................
4
490(q)(12) .........................
Analyze produced water disposed of for H2S content and submit results to BSEE.
3 .....................
164 submittals .................
492
NTL ...................................
Voluntary submit to USCG read only access to the
EPIRB data for their moored drilling rig fleet before hurricane season.
.25 ..................
80 submittals ...................
20
asabaliauskas on DSKBBXCHB2PROD with NOTICES
* In the future, BSEE may require electronic filing of some submissions.
Estimated Reporting and
Recordkeeping Non-Hour Cost Burden:
There are no non-hour cost burdens
associated with this collection
Public Disclosure Statement: The PRA
(44 U.S.C. 3501, et seq.) provides that an
agency may not conduct or sponsor a
collection of information unless it
displays a currently valid OMB control
number. Until OMB approves a
collection of information, you are not
obligated to respond.
Comments: Before submitting an ICR
to OMB, PRA section 3506(c)(2)(A)
requires each agency ‘‘. . . to provide
notice . . . and otherwise consult with
members of the public and affected
agencies concerning each proposed
collection of information . . .’’.
Agencies must specifically solicit
comments to: (a) Evaluate whether the
collection is necessary or useful; (b)
evaluate the accuracy of the burden of
the proposed collection of information;
(c) enhance the quality, usefulness, and
clarity of the information to be
collected; and (d) minimize the burden
on the respondents, including the use of
technology.
Agencies must also estimate the nonhour paperwork cost burdens to
respondents or recordkeepers resulting
from the collection of information.
Therefore, if you have other non-hour
burden costs to generate, maintain, and
disclose this information, you should
comment and provide your total capital
and startup cost components or annual
operation, maintenance, and purchase
of service components. For further
information on this burden, refer to 5
CFR 1320.3(b)(1) and (2), or contact the
Bureau representative listed previously
in this notice.
We will summarize written responses
to this notice and address them in our
VerDate Sep<11>2014
20:56 Jul 06, 2017
Jkt 241001
submission for OMB approval. As a
result of your comments, we will make
any necessary adjustments to the burden
in our submission to OMB.
Public Availability of Comments:
Before including your address, phone
number, email address, or other
personal identifying information in your
comment, you should be aware that
your entire comment—including your
personal identifying information—may
be made publicly available at any time.
While you can ask us in your comment
to withhold your personal identifying
information from public review, we
cannot guarantee that we will be able to
do so.
BSEE Information Collection
Clearance Officer: Nicole Mason, (703)
787–1607.
Dated: June 6, 2017.
Douglas Morris,
Chief, Office of Offshore Regulatory Programs.
[FR Doc. 2017–14236 Filed 7–6–17; 8:45 am]
BILLING CODE 4310–VH–P
INTERNATIONAL TRADE
COMMISSION
Notice of Receipt of Complaint;
Solicitation of Comments Relating to
the Public Interest
U.S. International Trade
Commission.
ACTION: Notice.
AGENCY:
Notice is hereby given that
the U.S. International Trade
Commission has received a complaint
entitled Certain Shielded Electrical
Ribbon Cables and Products Containing
the Same, DN 3234; the Commission is
soliciting comments on any public
interest issues raised by the complaint
SUMMARY:
PO 00000
Frm 00087
Fmt 4703
Sfmt 4703
or complainant’s filing pursuant to the
Commission’s Rules of Practice and
Procedure.
Lisa
R. Barton, Secretary to the Commission,
U.S. International Trade Commission,
500 E Street SW., Washington, DC
20436, telephone (202) 205–2000. The
public version of the complaint can be
accessed on the Commission’s
Electronic Document Information
System (EDIS) at https://edis.usitc.gov,
and will be available for inspection
during official business hours (8:45 a.m.
to 5:15 p.m.) in the Office of the
Secretary, U.S. International Trade
Commission, 500 E Street SW.,
Washington, DC 20436, telephone (202)
205–2000.
General information concerning the
Commission may also be obtained by
accessing its Internet server at United
States International Trade Commission
(USITC) at https://www.usitc.gov. The
public record for this investigation may
be viewed on the Commission’s
Electronic Document Information
System (EDIS) at https://edis.usitc.gov.
Hearing-impaired persons are advised
that information on this matter can be
obtained by contacting the
Commission’s TDD terminal on (202)
205–1810.
SUPPLEMENTARY INFORMATION: The
Commission has received a complaint
and a submission pursuant to § 210.8(b)
of the Commission’s Rules of Practice
and Procedure filed on behalf of 3M
Company and 3M Innovative Properties
Company on June 30, 2017. The
complaint alleges violations of section
337 of the Tariff Act of 1930 (19 U.S.C.
1337) in the importation into the United
States, the sale for importation, and the
sale within the United States after
FOR FURTHER INFORMATION CONTACT:
E:\FR\FM\07JYN1.SGM
07JYN1
| File Type | application/pdf |
| File Modified | 2017-07-07 |
| File Created | 2017-07-07 |