60 Day Federal Register Notice

93962

Federal Register / Vol. 81, No. 246 / Thursday, December 22, 2016 / Notices

temporary importation during the
period of Presidential review (19 U.S.C.
1337(j)) of lithium metal oxide cathode
materials that are subject to the limited
exclusion order. The Commission’s
orders and opinion were delivered to
the President and to the United States
Trade Representative on the day of their
issuance.
The authority for the Commission’s
determination is contained in section
337 of the Tariff Act of 1930, as
amended (19 U.S.C. 1337), and in Part
210 of the Commission’s Rules of
Practice and Procedure (19 CFR part
210).

DEPARTMENT OF LABOR

By order of the Commission.
Issued: December 16, 2016.
Lisa R. Barton,
Secretary to the Commission.

OSHA solicits public
comments concerning its proposal to
extend the Office of Management and
Budget’s (OMB) approval of the
information collection requirements
specified in the Standard on Presence
Sensing Device Initiation (29 CFR
1910.217(h)).
DATES: Comments must be submitted
(postmarked, sent, or received) by
February 21, 2017.
ADDRESSES:
Electronically: You may submit
comments and attachments
electronically at http://
www.regulations.gov, which is the
Federal eRulemaking Portal. Follow the
instructions online for submitting
comments.
Facsimile: If your comments,
including attachments, are not longer
than 10 pages you may fax them to the
OSHA Docket Office at (202) 693–1648.
Mail, hand delivery, express mail,
messenger, or courier service: When
using this method, you must submit
your comments and attachments to the
OSHA Docket Office, Docket No.
OSHA–2010–0009 Occupational Safety
and Health Administration, U.S.
Department of Labor, Room N–3653,
200 Constitution Avenue NW.,
Washington, DC 20210. Deliveries
(hand, express mail, messenger, and
courier service) are accepted during the
Department of Labor’s and Docket
Office’s normal business hours, 10:00
a.m. to 3:00 p.m., e.t.
Instructions: All submissions must
include the Agency name and the OSHA
docket number (OSHA–2010–0009) for
the Information Collection Request
(ICR). All comments, including any
personal information you provide, are
placed in the public docket without
change, and may be made available
online at http://www.regulations.gov.
For further information on submitting
comments see the ‘‘Public
Participation’’ heading in the section of
this notice titled SUPPLEMENTARY
INFORMATION.

BILLING CODE 7020–02–P

INTERNATIONAL TRADE
COMMISSION
[USITC SE–16–043]

Government in the Sunshine Act
Meeting Notice
United
States International Trade Commission.
TIME AND DATE: December 30, 2016 at
11:00 a.m.
PLACE: Room 101, 500 E Street SW.,
Washington, DC 20436, Telephone:
(202) 205–2000.
STATUS: Open to the public.
MATTERS TO BE CONSIDERED:
1. Agendas for future meetings: None.
2. Minutes.
3. Ratification List.
4. Vote in Inv. Nos. 701–TA–565 and
731–TA–1341 (Preliminary) (Hardwood
Plywood from China). The Commission
is currently scheduled to complete and
file its determinations on January 3,
2017; views of the Commission are
currently scheduled to be completed
and filed on January 10, 2017.
5. Outstanding action jackets: None.
In accordance with Commission
policy, subject matter listed above, not
disposed of at the scheduled meeting,
may be carried over to the agenda of the
following meeting.

sradovich on DSK3GMQ082PROD with NOTICES

AGENCY HOLDING THE MEETING:

By order of the Commission.
Issued: December 19, 2016.
William R. Bishop,
Supervisory Hearings and Information
Officer.
[FR Doc. 2016–31021 Filed 12–20–16; 4:15 pm]
BILLING CODE 7020–02–P

17:40 Dec 21, 2016

[Docket No. OSHA–2010–0009

The Standard on Presence Sensing
Device Initiation (PSDI) (Extension of
the Office of Management and
Budget’s (OMB) Approval of
Collections of Information (Paperwork)
Requirements
Occupational Safety and Health
Administration (OSHA), Labor.
ACTION: Request for public comments.
AGENCY:

SUMMARY:

[FR Doc. 2016–30811 Filed 12–21–16; 8:45 am]

VerDate Sep<11>2014

Occupational Safety and Health
Administration

Jkt 241001

PO 00000

Frm 00082

Fmt 4703

Sfmt 4703

Docket: To read or download
comments or other material in the
docket, go to http://www.regulations.gov
or the OSHA Docket Office at the
address above. All documents in the
docket (including this Federal Register
notice) are listed in the http://
www.regulations.gov index; however,
some information (e.g., copyrighted
material) is not publicly available to
read or download from the Web site. All
submissions, including copyrighted
material, are available for inspection
and copying at the OSHA Docket Office.
You also may contact Theda Kenney at
the address below to obtain a copy of
the ICR.
FOR FURTHER INFORMATION CONTACT:
Theda Kenney or Todd Owen,
Directorate of Standards and Guidance,
OSHA, U.S. Department of Labor, Room
N–3609, 200 Constitution Avenue NW.,
Washington, DC 20210; telephone (202)
693–2222.
SUPPLEMENTARY INFORMATION:
I. Background
The Department of Labor, as part of its
continuing effort to reduce paperwork
and respondent (i.e., employer) burden,
conducts a preclearance consultation
program to provide the public with an
opportunity to comment on proposed
and continuing information collection
requirements in accord with the
Paperwork Reduction Act of 1995 (PRA)
(44 U.S.C. 3506(c)(2)(A)). This program
ensures that information is in the
desired format, reporting burden (time
and costs) is minimal, collection
instruments are clearly understood, and
OSHA’s estimate of the information
collection burden is accurate. The
Occupational Safety and Health Act of
1970 (the OSH Act) (29 U.S.C. 651 et
seq.) authorizes information collection
by employers as necessary or
appropriate for enforcement of the OSH
Act or for developing information
regarding the causes and prevention of
occupational injuries, illnesses, and
accidents (29 U.S.C. 657). The OSH Act
also requires that OSHA obtain such
information with minimum burden
upon employers, especially those
operating small businesses, and to
reduce to the maximum extent feasible
unnecessary duplication of efforts in
obtaining information (29 U.S.C. 657).
Paragraph 1910.217(h) regulates the
use of presence sensing devices
(‘‘PSDs’’) used to initiate the operation
of mechanical power presses; a PSD
(e.g., a photoelectric field or curtain)
automatically stops the stroke of a
mechanical power press when the
device detects an operator entering a
danger zone near the press. A

E:\FR\FM\22DEN1.SGM

22DEN1

Federal Register / Vol. 81, No. 246 / Thursday, December 22, 2016 / Notices
mechanical power press using presence
sensing device initiation (PSDI)
automatically starts (initiates) the stroke
when the device detects no operator
within the danger zone near the press.
The certification/validation of safety
systems for PSDI shall consider the
press, controls, safeguards, operator,
and environment as an integrated
system which shall comply with 29 CFR
1910.217(a) through (h). Accordingly,
the Standard protects employees from
serious crush injuries, amputations, and
death.
II. Special Issues for Comment
OSHA has a particular interest in
comments on the following issues:
• Whether the proposed information
collection requirements are necessary
for the proper performance of the
Agency’s functions, including whether
the information is useful;
• The accuracy of OSHA’s estimate of
the burden (time and costs) of the
information collection requirements,
including the validity of the
methodology and assumptions used;
• The quality, utility, and clarity of
the information collected; and
• Ways to minimize the burden on
employers who must comply; for
example, by using automated or other
technological information collection
and transmission techniques.

sradovich on DSK3GMQ082PROD with NOTICES

III. Proposed Actions
The Agency reports no program
changes or adjustments; it is retaining
its previous estimate of one hour.
The Agency will summarize the
comments submitted in response to this
notice and will include this summary in
the request to OMB to extend the
approval of the information collection
requirements contained in the Standard.
Type of Review: Extension of a
currently approved collection.
Title: Presence Sensing Device
Initiation (PSDI) (29 CFR 1910.217 (h)).
OMB Control Number: 1218–0143.
Affected Public: Business or other forprofits; Not-for-profit organizations;
Federal Government; State, Local, or
Tribal Government.
Number of Respondents: 10.
Frequency of Response: Initially,
annually; On occasion.
Total Responses: 10.
Average Time per Responses: 0.
Estimated Total Burden Hours: 1.
Estimated Cost (Operation and
Maintenance): $0.
IV. Public Participation—Submission of
Comments on This Notice and Internet
Access to Comments and Submissions
You may submit comments in
response to this document as follows:

VerDate Sep<11>2014

17:40 Dec 21, 2016

Jkt 241001

(1) Electronically at http://
www.regulations.gov, which is the
Federal eRulemaking Portal; (2) by
facsimile; or (3) by hard copy. All
comments, attachments, and other
material must identify the Agency name
and the OSHA docket number for this
ICR (Docket No. OSHA–2010–0009. You
may supplement electronic submissions
by uploading document files
electronically. If you wish to mail
additional materials in reference to an
electronic or facsimile submission, you
must submit them to the OSHA Docket
Office (see the section of this notice
titled ADDRESSES). The additional
materials must clearly identify your
electronic comments by your name,
date, and the docket number so the
Agency can attach them to your
comments.
Because of security procedures, the
use of regular mail may cause a
significant delay in the receipt of
comments. For information about
security procedures concerning the
delivery of materials by hand, express
delivery, messenger, or courier service,
please contact the OSHA Docket Office
at (202) 693–2350, (TTY (877) 889–
5627).
Comments and submissions are
posted without change at http://
www.regulations.gov. Therefore, OSHA
cautions commenters about submitting
personal information such as their
social security number and date of birth.
Although all submissions are listed in
the http://www.regulations.gov index,
some information (e.g., copyrighted
material) is not publicly available to
read or download from this Web site.
All submissions, including copyrighted
material, are available for inspection
and copying at the OSHA Docket Office.
Information on using the http://
www.regulations.gov Web site to submit
comments and access the docket is
available at the Web site’s ‘‘User Tips’’
link. Contact the OSHA Docket Office
for information about materials not
available from the Web site, and for
assistance in using the Internet to locate
docket submissions.
V. Authority and Signature
David Michaels, Ph.D., MPH,
Assistant Secretary of Labor for
Occupational Safety and Health,
directed the preparation of this notice.
The authority for this notice is the
Paperwork Reduction Act of 1995 (44
U.S.C. 3506 et seq.) and Secretary of
Labor’s Order No. 1–2012 (77 FR 3912).

PO 00000

Frm 00083

Fmt 4703

Sfmt 4703

93963

Signed at Washington, DC, on December
16, 2016.
David Michaels,
Assistant Secretary of Labor for Occupational
Safety and Health.
[FR Doc. 2016–30845 Filed 12–21–16; 8:45 am]
BILLING CODE 4510–26–P

DEPARTMENT OF LABOR
Occupational Safety and Health
Administration
[Docket No. OSHA–2010–0042]

Gear Certification Standard; Extension
of the Office of Management and
Budget’s (OMB) Approval of
Information Collection (Paperwork)
Requirements
Occupational Safety and Health
Administration (OSHA), Labor.
ACTION: Request for public comments.
AGENCY:

OSHA solicits public
comments concerning its proposal to
extend OMB approval of the
information collection requirements
specified in the Gear Certification
Standard (29 CFR part 1919).
DATES: Comments must be submitted
(postmarked, sent, or received) by
February 21, 2017.
ADDRESSES: Electronically: You may
submit comments and attachments
electronically at http://
www.regulations.gov, which is the
Federal eRulemaking Portal. Follow the
instructions online for submitting
comments.
Facsimile: If your comments,
including attachments, are not longer
than 10 pages you may fax them to the
OSHA Docket Office at (202) 693–1648.
Mail, hand delivery, express mail,
messenger, or courier service: When
using this method, you must submit a
copy of your comments and attachments
to the OSHA Docket Office, Docket No.
OSHA–2010–0042, U.S. Department of
Labor, Occupational Safety and Health
Administration, Room N–3653, 200
Constitution Avenue NW., Washington,
DC 20210. Deliveries (hand, express
mail, messenger, and courier service)
are accepted during the Department of
Labor’s and Docket Office’s normal
business hours, 10:00 a.m. to 3:00 p.m.,
e.t.
Instructions: All submissions must
include the Agency name and the OSHA
docket number (OSHA–2010–0042) for
the Information Collection Request
(ICR). All comments, including any
personal information you provide, are
placed in the public docket without
change, and may be made available
online at http://www.regulations.gov.
SUMMARY:

E:\FR\FM\22DEN1.SGM

22DEN1