BOEM-0137 OCS Plan Information

U.S. Department of the Interior

OMB Control Number: 1010-0151
OMB Approval Expires: xx/xx/2021

Bureau of Ocean Energy Management

OCS PLAN INFORMATION FORM
General Information
Type of OCS Plan:

Exploration Plan (EP)

Development Operations Coordination Document (DOCD)

Company Name:

BOEM Operator Number:

Address:

Contact Person:
Phone Number:
E-Mail Address:

If a service fee is required under 30 CFR 550.125(a), provide the

Amount paid

Receipt No.

Project and Worst Case Discharge (WCD) Information
Lease(s):
Objective(s)

Area:
Oil

Gas

Platform/Well Name:

Block(s):

Sulphur

Salt

Project Name (If Applicable):

Onshore Support Base(s):

Total Volume of WCD:

Distance to Closest Land (Miles):

API Gravity:

Volume from uncontrolled blowout:

Have you previously provided information to verify the calculations and assumptions for your WCD?

Yes

No

Do you propose to use new or unusual technology to conduct your activities?

Yes

No

Do you propose to use a vessel with anchors to install or modify a structure?

Yes

No

Do you propose any facility that will serve as a host facility for deepwater subsea development?

Yes

No

If so, provide the Control Number of the EP or DOCD with which this information was provided

Description of Proposed Activities and Tentative Schedule (Mark all that apply)
Proposed Activity

Start Date

End Date

No. of Days

Exploration drilling
Development drilling
Well completion
Well test flaring (for more than 48 hours)
Installation or modification of structure
Installation of production facilities
Installation of subsea wellheads and/or manifolds
Installation of lease term pipelines
Commence production
Other (Specify and attach description)

Description of Drilling Rig

Description of Structure

Jackup

Drillship

Caisson

Tension leg platform

Gorilla Jackup

Platform rig

Fixed platform

Compliant tower

Semisubmersible

Submersible

Spar

Guyed tower

DP Semisubmersible

Other (Attach Description)

Floating production
system

Other (Attach Description)

Drilling Rig Name (If Known):

Description of Lease Term Pipelines
From (Facility/Area/Block)

To (Facility/Area/Block)

Diameter (Inches)

Form BOEM- 0137 (March 2018- Supersedes all previous editions of this form which may not be used.)

Length (Feet)

Page 1 of 4

OCS PLAN INFORMATION FORM (CONTINUED)
Include one copy of this page for each proposed well/structure

Proposed Well/Structure Location
Previously reviewed under an approved EP or
DOCD?

Well or Structure Name/Number (If renaming well or
structure, reference previous name):

Yes
No If this is an existing well or structure, list the
Is this an existing well
or structure?
Complex ID or API No.
Do you plan to use a subsea BOP or a surface BOP on a floating facility to conduct your proposed activities?
WCD info

For wells, volume of uncontrolled
blowout (Bbls/day):
Surface Location

Lease No.

OCS

For structures, volume of all storage and
pipelines (Bbls):
Bottom-Hole Location (For Wells)

Yes

No

Yes

No

API Gravity of
fluid
Completion (For multiple completions,
enter separate lines)
OCS
OCS

OCS

Area Name
Block No.
Blockline
Departures
(in feet)

Lambert XY
coordinates

Latitude/
Longitude

N/S Departure:

F

L

N/S Departure:

F

L

E/W Departure:

F

L

E/W Departure:

F

L

X:

X:

Y:

Y:

Latitude

Latitude

Longitude

Longitude

Water Depth (Feet):

MD (Feet):

TVD (Feet):

Anchor Radius (if applicable) in feet:

N/S Departure:
N/S Departure:
N/S Departure:
E/W Departure:
E/W Departure:
E/W Departure:
X:
X:
X:
Y:
Y:
Y:
Latitude
Latitude
Latitude
Longitude
Longitude
Longitude
MD (Feet):
MD (Feet):
MD (Feet):

F
F
F
F
F
F

TVD (Feet):
TVD (Feet):
TVD (Feet):

Anchor Locations for Drilling Rig or Construction Barge (If anchor radius supplied above, not necessary)
Anchor Name
or No.

Area

Block

X Coordinate

Y Coordinate

X=

Y=

X=

Y=

X=

Y=

X=

Y=

X=

Y=

X=

Y=

X=

Y=

X=

Y=

Length of Anchor Chain on Seafloor

Form BOEM- 0137 (March 2018- Supersedes all previous editions of this form which may not be used.)

Page 2 of 4

L
L
L
L
L
L

OCS PLAN INFORMATION FORM (CONTINUED)

Provide the following information for the well with the highest Worst Case Discharge volume:
Worst Case Discharge (WCD) Well Information
WCD Well
Name

Surface Lease

Surface
Area/Block

OCS Lease

Well No.

Bottom Lease

Bottom
Area/Block

Product Type

MD

Analog Well(s)
Area/Block

API No.

Geologic Data for WCD
Open Hole Interval for WCD
Top (TVD in feet)

Base (TVD in feet)

Sand 1

Sand 2

Sand 3

Sand 4

Sand 5

Formation Data
Sand Name
Estimated Top TVD
Estimated Base TVD
Estimated Net Sand Height MD
(Net Pay if hydrocarbon)
Estimated Net Sand Height
TVT (Net Pay if hydrocarbon)
Fluid Type
Used in WCD? (Yes/No)

Seismic Survey Used

Engineering Data for WCD
WCD Engineering Items
WCD (STB/Day)
WCD Calculated at
Flow Correlation
Outlet Pressure (Psia)
Gas Turbulence Factor
Software Model Used

Mudline

Sand 1

Yes

No

Sand 2

Atmosphere

Sand 3

Yes

Sand 4

No

Sand 5

Formation Data
Sand Name
Permeability (mD)
Initial Pressure (PSIA)

Form BOEM- 0137 (March 2018- Supersedes all previous editions of this form which may not be used.)

Page 3 of 4

TVD

OCS PLAN INFORMATION FORM (CONTINUED)

Sand 1

Sand 2

Sand 3

Sand 4

Sand 5

Formation Data

Reservoir Temperature (F)
Porosity (0.00)
Water Saturation (0.00)
Rock Compressibility
(microsips)
Water Salinity (ppm)
Drive Mechanism
Drainage Area (acres)

Oil Reservoir Data

Bubble Point Pressure (PSIA)
Initial Bo (RB/STB)
Bo (RB/STB) @ Bubble Point
Rsi (SCF/STB)
Initial Oil Viscosity (Cp)
Oil Viscosity (CP) @ Bubble
Point
Oil Compressibility (1/PSIA)
Oil API Gravity (API)
Specific Gas Gravity (0.00)

Gas Reservoir Data

Condensate API Gravity (API)
Specific Gas Gravity (0.00)
Yield (STB/MMCF)

Source of Permeability Used
Permeability from MDT
Permeability from Core Analysis

Percussion core

Rotary sidewall core

Conventional core

Pressure Transient Analysis
Permeability from CMR or NMR log
analysis
Permeability from other source

Provide Model Input Values for Relative Permeability:
Residual Oil to Gas fraction (=1-Slc-Swc)
Residual Oil to Water fraction (=Soc)
Critical Gas fraction (Sgc, Gas/Oil-Water Systems)
Residual Gas to Water fraction (Sgc, Gas/Gas-Water Systems)
Kro Oil Curve Endpoint (fraction of absolute permeability)
Krg Gas Curve Endpoint (fraction of absolute permeability)
Krw Water Curve Endpoint (fraction of absolute permeability)

Paperwork Reduction Act of 1995 Statement: The Paperwork Reduction Act of 1995 (44 U.S.C. 2501 et seq.) requires us to
inform you that BOEM collects this information as part of an applicant’s Exploration Plan or Development Operations
Coordination Document submitted for BOEM approval. We use the information to facilitate our review and data entry for OCS
plans. We will protect proprietary data according to the Freedom of Information Act and 30 CFR 550.197. An agency may not
conduct or sponsor, and a person is not required to respond to, a collection of information unless it displays a currently valid Office
of Management and Budget Control Number. Responses are mandatory (43 U.S.C. 1334). The public reporting burden for this
form is included in the burden for preparing Exploration Plans and Development Operations Coordination Documents. We
estimate that burden to average 600 hours with an accompanying EP, or 700 hours with an accompanying DPP or DOCD, including
the time for reviewing instructions, gathering and maintaining data, and completing and reviewing the forms associated with
subpart B. Direct comments regarding the burden estimate or any other aspect of this form to the Information Collection Clearance
Officer, Bureau of Ocean Energy Management, 45600 Woodland Road, Sterling, Virginia 20166.

Form BOEM- 0137 (March 2018- Supersedes all previous editions of this form which may not be used.)

Page 4 of 4