60 Day FRN

sradovich on DSK3GMQ082PROD with NOTICES

39780

Federal Register / Vol. 82, No. 161 / Tuesday, August 22, 2017 / Notices

forces capable of winning wars,
deterring aggression, and maintaining
freedom of the seas, consistent with
Congressional direction in section 5062
of Title 10 of the U.S. Code. A
Supplemental EIS/OEIS is considered
the appropriate document, as there is
recent scientific information including
revised acoustic criteria to consider, in
furtherance of NEPA, relevant to the
environmental effects of the DoN’s
Proposed Action. The analysis will
support Marine Mammal Protection Act
authorization requests.
Proposed training and testing
activities are generally consistent with
those analyzed in the 2015 Final EIS/
OEIS. In the Supplemental EIS/OEIS,
the DoN will analyze the proposed
changes to the tempo and types of
training and testing activities,
accounting for the introduction of new
technologies, the evolving nature of
international events, advances in
warfighting doctrine and procedures,
and changes in the organization of
vessels, aircraft, weapons systems, and
DoN personnel. In the NWTT
Supplemental EIS/OEIS, the DoN will
reflect the compilation of training and
testing activities required to fulfill the
DoN’s military readiness requirements
beyond 2020, and therefore includes the
analysis of newly proposed activities
and changes to previously analyzed
activities.
In the Supplemental EIS/OEIS, the
DoN will evaluate the potential
environmental effects of a no action
alternative and action alternatives.
Resources to be evaluated include, but
are not limited to, marine mammals, sea
turtles, essential fish habitat, threatened
and endangered species, and American
Indian and Alaska Native Traditional
Resources.
The scoping process is used to
identify public concerns and local
issues to be considered during the
development of the Draft Supplemental
EIS/OEIS. Federal agencies, state
agencies, local agencies, the public, and
interested persons are encouraged to
provide substantive comments to the
DoN on environmental resources and
issue areas of concern the commenter
believes the DoN should consider.
Comments must be postmarked or
received online by September 21, 2017
for consideration during the
development of the Draft Supplemental
EIS/OEIS. Comments can be mailed to:
Naval Facilities Engineering Command
Northwest, Attention: NWTT
Supplemental EIS/OEIS Project
Manager, 3730 North Charles Porter
Avenue, Building 385, Oak Harbor,
Washington 98278–3500. Comments can
be submitted online via the project Web

VerDate Sep<11>2014

18:00 Aug 21, 2017

Jkt 241001

site at http://www.nwtteis.com/. Also at
this Web site, those interested in
receiving electronic project updates can
subscribe to receive notifications via
email for key milestones throughout the
environmental planning process.
Dated: August 16, 2017.
A.M. Nichols,
Lieutenant Commander, Judge Advocate
General’s Corps, U.S. Navy, Federal Register
Liaison Officer.
[FR Doc. 2017–17618 Filed 8–21–17; 8:45 am]
BILLING CODE 3810–FF–P

DEPARTMENT OF EDUCATION
Free Application for Federal Student
Aid (FAFSA®) Information To Be
Verified for the 2018–2019 Award Year
Correction
In notice document 2017–09167,
appearing on pages 21204 through
21208, in the issue of Friday, May 5,
2017, make the following corrections:
1. On page 21207, in the second
column, on the second line, the entry
that reads ‘‘I certify that I ___’’, should
read:
‘‘I certify that I ___ am’’.
2. On the same page, in the same
column, on the nineteenth line, the
entry that reads ‘‘I certify that I ___’’,
should read:
‘‘I certify that I ___ am’’.
[FR Doc. C1–2017–09167 Filed 8–21–17; 8:45 am]
BILLING CODE 1301–00–D

DEPARTMENT OF ENERGY
Office of Energy Efficiency and
Renewable Energy
[EERE–2017–BT–CRT–0054]

Proposed Agency Information
Collection Extension
Office of Energy Efficiency and
Renewable Energy, U.S. Department of
Energy.
ACTION: Information collection
extension, with changes; notice and
request for comment.
AGENCY:

The U.S. Department of
Energy (DOE) intends to extend with
changes for three years with the Office
of Management and Budget (OMB), the
Certification Reports, Compliance
Statements, Application for a Test
Procedure Waiver, and Recordkeeping
for Consumer Products and
Commercial/Industrial Equipment
subject to Energy or Water Conservation
Standards Package under OMB No.

SUMMARY:

PO 00000

Frm 00032

Fmt 4703

Sfmt 4703

1910–1400. Comments are invited on:
(a) Whether the proposed collection of
information is necessary for the proper
performance of the functions of the
agency, including whether the
information shall have practical utility;
(b) the accuracy of the agency’s estimate
of the burden of the proposed collection
of information, including the validity of
the methodology and assumptions used;
(c) ways to enhance the quality, utility,
and clarity of the information to be
collected; and (d) ways to minimize the
burden of the collection of information
on respondents, including through the
use of automated collection techniques
or other forms of information
technology.
Written comments and
information are requested and will be
accepted on or before October 23, 2017.
ADDRESSES: Interested persons are
encouraged to submit comments using
the Federal eRulemaking Portal at
http://www.regulations.gov. Follow the
instructions for submitting comments.
Alternatively, interested persons may
submit comments, identified by docket
number EERE–2017–BT–CRT–0054, by
any of the following methods:
1. Federal eRulemaking Portal: http://
www.regulations.gov. Follow the
instructions for submitting comments.
2. Email: to
InfoCollection2017CRT0054@
ee.doe.gov. Include docket number
EERE–2017–BT–CRT–0054 in the
subject line of the message.
3. Postal Mail: Appliance and
Equipment Standards Program, U.S.
Department of Energy, Building
Technologies Office, Mailstop EE–5B,
1000 Independence Avenue SW.,
Washington, DC 20585–0121.
Telephone: (202) 287–1445. If possible,
please submit all items on a compact
disc (‘‘CD’’), in which case it is not
necessary to include printed copies.
4. Hand Delivery/Courier: Appliance
and Equipment Standards Program, U.S.
Department of Energy, Building
Technologies Office, 950 L’Enfant Plaza
SW., Suite 600, Washington, DC 20024.
Telephone: (202) 287–1445. If possible,
please submit all items on a CD, in
which case it is not necessary to include
printed copies.
No telefacsimilies (faxes) will be
accepted.
Docket: The docket for this activity,
which includes Federal Register
notices, comments, and other
supporting documents/materials, is
available for review at http://
www.regulations.gov. All documents in
the docket are listed in the http://
www.regulations.gov index. However,
some documents listed in the index,
DATES:

E:\FR\FM\22AUN1.SGM

22AUN1

Federal Register / Vol. 82, No. 161 / Tuesday, August 22, 2017 / Notices
such as those containing information
that is exempt from public disclosure,
may not be publicly available.
The docket Web page can be found at
http://www.regulations.gov/
#!docketDetail;D=EERE-2017-BT-CRT0054. The docket Web page will contain
simple instructions on how to access all
documents, including public comments,
in the docket.
FOR FURTHER INFORMATION CONTACT:
Ashley Armstrong, U.S. Department of
Energy, Office of Energy Efficiency and
Renewable Energy, Building
Technologies Office, EE–5B, 1000
Independence Avenue SW.,
Washington, DC 20585–0121.
Telephone: (202) 287–1445. Email:
ApplianceStandardsQuestions@
ee.doe.gov.
This
information collection request contains:
(1) OMB No. 1910–1400; (2) Information
Collection Request Title: Certification
Reports, Compliance Statements,
Application for a Test Procedure
Waiver, Application for Extension of
Representation Requirements, Labeling,
and Recordkeeping for Consumer
Products and Commercial/Industrial
Equipment subject to Federal Energy or
Water Conservation Standards; (3) Type
of Request: Renewal with changes; (4)
Purpose:
Pursuant to the Energy Policy and
Conservation Act of 1975 (‘‘EPCA’’ or
‘‘the Act’’),1 Public Law 94–163 (42
U.S.C. 6291–6317, as codified), DOE
regulates the energy efficiency of a
number of consumer products, and
commercial and industrial equipment.
Title III, Part B 2 of EPCA established the
Energy Conservation Program for
Consumer Products Other Than
Automobiles, which sets forth a variety
of provisions designed to improve
energy efficiency of covered consumer
products (‘‘covered products’’). Title III,
Part C 3 of EPCA, added by Public Law
95–619, Title IV, § 441(a), established
the Energy Conservation Program for
Certain Industrial Equipment, which
sets forth a variety of provisions
designed to improve energy efficiency of
covered commercial and industrial
equipment (collectively referred to as
‘‘covered equipment’’).
Covered products and covered
equipment are described in 10 CFR
parts 429, 430, and 431. These covered

sradovich on DSK3GMQ082PROD with NOTICES

SUPPLEMENTARY INFORMATION:

1 All references to EPCA in this document refer
to the statute as amended through the Energy
Efficiency Improvement Act of 2015 (EEIA 2015),
Public Law 114–11 (April 30, 2015).
2 For editorial reasons, upon codification in the
U.S. Code, Part B was redesignated Part A.
3 For editorial reasons, upon codification in the
U.S. Code, Part C was redesignated Part A–1.

VerDate Sep<11>2014

18:00 Aug 21, 2017

Jkt 241001

products and covered equipment,
including all product or equipment
classes, include: (1) Consumer
refrigerators, refrigerator-freezers and
freezers; (2) Room air conditioners; (3)
Central air conditioners and central air
conditioning heat pumps; (4) Consumer
water heaters; (5) Consumer furnaces
and boilers; (6) Dishwashers; (7)
Residential clothes washers; (8) Clothes
dryers; (9) Direct heating equipment;
(10) Cooking products; (11) Pool heaters;
(12) Television sets; (13) Fluorescent
lamp ballasts; (14) General service
fluorescent lamps, general service
incandescent lamps, and incandescent
reflector lamps; (15) Faucets; (16)
Showerheads; (17) Water closets; (18)
Urinals; (19) Ceiling fans; (20) Ceiling
fan light kits; (21) Torchieres; (22)
Compact fluorescent lamps; (23)
Dehumidifiers; (24) External power
supplies; (25) Battery chargers; (26)
Candelabra base incandescent lamps
and intermediate base incandescent
lamps; (27) Commercial warm air
furnaces; (28) Commercial refrigerators,
freezers, and refrigerator-freezers; (29)
Commercial heating and air
conditioning equipment; (30)
Commercial water heating equipment;
(31) Automatic commercial ice makers;
(32) Commercial clothes washers; (33)
Distribution transformers; (34)
Illuminated exit signs; (35) Traffic signal
modules and pedestrian modules; (36)
Commercial unit heaters; (37)
Commercial pre-rinse spray valves; (38)
Refrigerated bottled or canned beverage
vending machines; (39) Walk-in coolers
and walk-in freezers and certain
components; (40) Metal halide lamp
ballasts and fixtures (41) Integrated
light-emitting diode lamps; (42) General
service lamps; (43) Furnace fans; (44)
Pumps; (45) Commercial packaged
boilers; (46) Consumer miscellaneous
refrigeration equipment; (47) Portable
air conditioners; (48) Compressors; (49)
Electric motors, and (50) Small electric
motors.
Under EPCA, DOE’s energy
conservation program consists
essentially of four parts: (1) Testing, (2)
labeling, (3) Federal energy conservation
standards, and (4) certification and
enforcement procedures. For consumer
products, relevant provisions of the Act
specifically include definitions (42
U.S.C. 6291), energy conservation
standards (42 U.S.C. 6295), test
procedures (42 U.S.C. 6293), labeling
provisions (42 U.S.C. 6294), and the
authority to require information and
reports from manufacturers (42 U.S.C.
6296). For covered equipment, relevant
provisions of the Act include definitions
(42 U.S.C. 6311), energy conservation

PO 00000

Frm 00033

Fmt 4703

Sfmt 4703

39781

standards (42 U.S.C. 6313), test
procedures (42 U.S.C. 6314), labeling
provisions (42 U.S.C. 6315), and the
authority to require information and
reports from manufacturers (42 U.S.C.
6316).
DOE is seeking to renew its
information collection related to the
following aspects of the appliance
standards program: (1) Gathering data
and submitting certification and
compliance reports for each basic model
distributed in commerce in the U.S.
including supplemental testing
instructions for certain commercial
equipment; (2) maintaining records
underlying the certified ratings for each
basic model including test data and the
associated calculations; (3) applications
for a test procedure waiver, which
manufacturers may elect to submit if
they manufacture a basic model that
cannot be tested pursuant to the DOE
test procedure; (4) applications
requesting an extension of the date by
which representations must be made in
accordance with any new or amended
DOE test procedure; and (5) labeling.
DOE’s certification and compliance
activities ensure accurate and
comprehensive information about the
energy and water use characteristics of
covered products and covered
equipment sold in the United States.
Manufacturers of all covered products
and covered equipment must submit a
certification report before a basic model
is distributed in commerce, annually
thereafter, and if the basic model is
redesigned in such a manner to increase
the consumption or decrease the
efficiency of the basic model such that
the certified rating is no longer
supported by the test data. Additionally,
manufacturers must report when
production of a basic model has ceased
and is no longer offered for sale as part
of the next annual certification report
following such cessation. DOE requires
the manufacturer of any covered
product or covered equipment to
establish, maintain, and retain the
records of certification reports, of the
underlying test data for all certification
testing, and of any other testing
conducted to satisfy the requirements of
part 429, part 430, and/or part 431.
Certification reports provide DOE and
consumers with comprehensive, up-todate efficiency information and support
effective enforcement.
As the result of a negotiated
rulemaking, DOE adopted additional
certification requirements for
commercial HVAC, water heater, and
refrigeration equipment. Specifically,
DOE requires manufacturers of
commercial refrigeration equipment and
some types of commercial HVAC

E:\FR\FM\22AUN1.SGM

22AUN1

sradovich on DSK3GMQ082PROD with NOTICES

39782

Federal Register / Vol. 82, No. 161 / Tuesday, August 22, 2017 / Notices

equipment to submit a PDF with
specific testing instructions to be used
by the Department during verification
and enforcement testing. Manufacturers
of commercial water heating equipment
and some types of commercial HVAC
equipment have the option of
submitting a PDF with additional testing
instructions at the manufacturer’s
discretion. For additional information
on the negotiated rulemaking or
supplemental testing instructions see
docket number EERE–2013–BT–NOC–
0023.
On December 18, 2014, Congress
enacted the EPS Service Parts Act of
2014 (Pub. L. 113–263, ‘‘Service Parts
Act’’). That law exempted
manufacturers of certain external power
supplies (‘‘EPSs’’) that were made
available as service and spare parts for
end-use products manufactured before
February 10, 2016, from the energy
conservation standards that DOE
promulgated in its February 2014 rule.
See 79 FR 7846 (Feb. 10, 2014).
Additionally, the Service Parts Act
permits DOE to require manufacturers of
an EPS that is exempt from the 2016
standards to report to DOE the total
number of such EPS units that are
shipped annually as service and spare
parts and that do not meet those
standards. (42 U.S.C. 6295(u)(5)(A)(ii))
DOE may also limit the applicability of
the exemption if the Secretary
determines that the exemption is
resulting in a significant reduction of
the energy savings that would result in
the absence of the exemption. (42 U.S.C.
6295(u)(5)(A)(iii)) In a final rule
published on May 16, 2016, DOE
adopted reporting requirements for EPS
manufacturers to provide the total
number of exempt EPS units sold as
service and spare parts for which the
manufacturer is claiming exemption
from the current standards. 81 FR
30157.
DOE currently requires manufacturers
or their party representatives to prepare
and submit certification reports and
compliance statements using DOE’s
electronic Web-based tool, the
Compliance and Certification
Management System (CCMS), which is
the primary mechanism for submitting
certification reports to DOE. CCMS
currently has product and equipment
specific templates which manufacturers
are required to use when submitting
certification data to DOE. DOE believes
the availability of electronic filing
through the CCMS system reduces
reporting burdens, streamlines the
process, and provides the Department
with needed information in a
standardized, more accessible form.
This electronic filing system also

VerDate Sep<11>2014

18:00 Aug 21, 2017

Jkt 241001

ensures that records are recorded in a
permanent, systematic way.
Manufacturers also may rely on CCMS
reporting to satisfy certain reporting
requirements established by the Federal
Trade Commission (‘‘FTC’’). EPCA
directs the FTC generally to prescribe
labeling rules for the consumer products
subject to energy conservation standards
under EPCA. (42 U.S.C. 6296) The
required labels generally must disclose
the estimated annual operating cost of
such product (determined in accordance
with Federal test procedures); and
information respecting the range of
estimated annual operating costs for
covered products to which the rule
applies. (42 U.S.C 6296(c)(1)) Pursuant
to EPCA, the FTC prescribed the Energy
Labeling Rule, which in part, requires
manufacturers to attach yellow
EnergyGuide labels to many of the
covered consumer products. See 16 CFR
part 305. EnergyGuide labels for most
products subject to the FTC labeling
requirement contain three key
disclosures: Estimated annual energy
cost (16 CFR 305.5); a product’s energy
consumption or energy efficiency rating
as determined from DOE test procedures
(Id.); and a comparability range
displaying the highest and lowest
energy costs or efficiency ratings for all
similar models (16 CFR 305.10).
The Energy Labeling Rule also
contains reporting requirements for
most products, under which
manufacturers must submit data to the
FTC both when they begin
manufacturing new models and on an
annual basis thereafter. 16 CFR 305.8.
These reports must contain, among
other things, estimated annual energy
consumption or energy efficiency
ratings, similar to what is required
under DOE’s reporting requirement. Id.
Prior to 2013, FTC collected energy data
on products subject to the Energy
Labeling Rule separate from DOE
through paper and email submissions to
the FTC. This arrangement required
manufacturers to submit nearly
duplicative reports to DOE and FTC.
However, in 2013 the FTC
streamlined and harmonized its
reporting requirements by giving
manufacturers the option to report FTCrequired data through DOE’s CCMS, in
lieu of the traditional practice of
submitting directly to FTC. 78 FR 2200
(Jan. 10, 2013); 16 CFR 305.8(a)(1). As
such, the CCMS reduces duplicative
reporting for manufacturers of covered
consumer products that are also
required to report under the FTC Energy
Label Rule.
DOE allows manufacturers of both
consumer products and/or commercial
equipment to apply for a test procedure

PO 00000

Frm 00034

Fmt 4703

Sfmt 4703

waiver. Manufacturers may submit an
application for a test procedure waiver
at his or her discretion if it is
determined that the basic model for
which the petition for waiver was
submitted contains one or more design
characteristics that prevents testing of
the basic model according to the
prescribed test procedures, or if the
prescribed test procedures may evaluate
the basic model in a manner so
unrepresentative of its true energy
consumption characteristics as to
provide materially inaccurate
comparative data. The Department
currently uses and will continue to use
the information submitted in the
application for a waiver as the basis for
granting or denying the petition. See 10
CFR 430.27 for additional information
on petitions for waivers and for
consumer products. See 10 CFR 431.401
for additional information on petitions
for waivers for commercial equipment.
DOE also allows manufacturers of
both consumer products and/or
commercial equipment to submit
applications requesting an extension of
the date by which representations must
be made in accordance with any new or
amended DOE test procedure. DOE may
grant extensions of up to 180 days if it
determines that making such
representations would impose an undue
hardship on the petitioner. The
Department currently uses and will
continue to use the information
submitted in these applications as the
basis for granting or denying the
petition.
In addition to the FTC labeling
requirements for consumer products
discussed, EPCA directs DOE to
establish labeling requirements for
covered industrial and commercial
equipment when specified criteria is
met. If the Department has prescribed
test procedures for any class of covered
equipment, a labeling rule applicable to
such class of covered equipment must
be prescribed. (42 U.S.C. 6315(a)) EPCA,
however, requires that certain criteria
must be met prior to DOE prescribing a
given labeling rule. Specifically, DOE
must determine that: (1) Labeling is
technologically and economically
feasible with respect to any particular
equipment class; (2) significant energy
savings will likely result from such
labeling; and (3) labeling is likely to
assist consumers in making purchasing
decisions. (42 U.S.C. 6315(h)) DOE has
established labeling requirements under
the authority in 42 U.S.C. 6315 for
electric motors (10 CFR 431.31), walk-in
coolers and freezers (10 CFR 431.305),
and pumps (10 CFR 431.466).
(4) Proposed changes to the
information collection, including

E:\FR\FM\22AUN1.SGM

22AUN1

sradovich on DSK3GMQ082PROD with NOTICES

Federal Register / Vol. 82, No. 161 / Tuesday, August 22, 2017 / Notices
description of additional information
that would be collected.
DOE is considering revisions to the
CCMS that would facilitate a reduction
in duplicative reporting under the
California’s Appliance Efficiency
Regulations, similar to what was
achieved with the FTC. Under its
Appliance Efficiency Regulations,
California requires manufacturers to
certify and report to the California
Energy Commission energy efficiency
data of certain consumer products. See,
California Code of Regulations (CCR),
Title 20, section 1606. For consumer
products that are reported to the
California Energy Commission and are
subject to Federal test procedures, the
California regulations generally require
submission of data from those Federal
test procedures (i.e., the same data
reported to DOE). DOE is considering
adding fields to the CCMS that would
allow the California Energy Commission
to accept a CCMS report in satisfaction
of the state reporting requirement.
Submission of the additional
information would not be mandatory
(from DOE’s perspective) and would
consist of information that
manufacturers are already submitting to
the California Energy Commission.
Should the California Energy
Commission choose to streamline and
harmonize its reporting requirements by
giving manufacturers the option to
report California-required data through
DOE’s CCMS, use of CCMS would
reduce duplicative reporting between
the California and DOE requirements.
(5) Annual Estimated Number of
Respondents: 2000;
(6) Annual Estimated Number of Total
Responses: 20,000;
(7) Annual Estimated Number of
Burden Hours: 675,000 (30 hours per
certification, including the time for
reviewing instructions, searching
existing data sources, gathering and
maintaining the data needed, and
completing and reviewing the collection
of information; 16 additional hours for
creating supplement testing instructions
for commercial HVAC, water heating,
and refrigeration equipment
manufacturers; 160 hours for test
procedure waiver preparation; 160
hours for representation extension
request preparation; 1 hour for creating
and applying a label for walk-in cooler
and freezer, commercial and industrial
pump, and electric motor
manufacturers);
(8) Annual Estimated Reporting and
Recordkeeping Cost Burden:
$67,500,000.
Statutory Authority: Section 326(d) of the
Energy Policy and Conservation Act, Public

VerDate Sep<11>2014

18:00 Aug 21, 2017

Jkt 241001

Law 94–163, as amended (42 U.S.C. 6296); 10
CFR parts 429, 430, and 431.
Issued in Washington, DC, on August 15,
2017.
Kathleen Hogan,
Deputy Assistant Secretary for Energy
Efficiency, Energy Efficiency and Renewable
Energy.

39783

Dated: August 10, 2017.
Nathaniel J. Davis, Sr.,
Deputy Secretary.
[FR Doc. 2017–17676 Filed 8–21–17; 8:45 am]
BILLING CODE 6717–01–P

DEPARTMENT OF ENERGY

[FR Doc. 2017–17733 Filed 8–21–17; 8:45 am]

Federal Energy Regulatory
Commission

BILLING CODE 6450–01–P

DEPARTMENT OF ENERGY

Combined Notice of Filings

Federal Energy Regulatory
Commission

Take notice that the Commission has
received the following Natural Gas
Pipeline Rate and Refund Report filings:

Combined Notice of Filings

Filings Instituting Proceedings

Take notice that the Commission has
received the following Natural Gas
Pipeline Rate and Refund Report filings:

Docket Numbers: RP17–969–000.
Applicants: Mercuria Energy America,
Inc., Noble Americas Gas & Power Corp.
Description: Joint Petition for
Temporary Waiver of Commission
Policies, Capacity Release Regulations
and Related Tariff Provisions and
Request for Expedited Treatment of
Mercuria Energy America, Inc., et al.
Filed Date: 8/10/17.
Accession Number: 20170810–5143.
Comments Due: 5 p.m. ET 8/22/17.
Docket Numbers: RP17–955–001.
Applicants: Tennessee Gas Pipeline
Company, L.L.C.
Description: Tennessee Gas Pipeline
Company, L.L.C. submits tariff filing per
154.205(b): Volume No. 2—Amended
Statoil—Susquehanna West Project to be
effective 9/1/2017.
Filed Date: 8/11/17.
Accession Number: 20170811–5000.
Comments Due: 5 p.m. ET 8/23/17.
Docket Numbers: RP17–970–000.
Applicants: Colorado Interstate Gas
Company, L.L.C.
Description: 2017 Penalties Assessed
Compliance Filing of Colorado Interstate
Gas Company, L.L.C.
Filed Date: 8/15/17.
Accession Number: 20170815–5038.
Comments Due: 5 p.m. ET 8/28/17.
Docket Numbers: RP17–971–000.
Applicants: Southwest Gas
Transmission Company, A Li.
Description: Southwest Gas
Transmission Company, A Limited
Partnership submits tariff filing per
154.204: Company Contact Name to be
effective 8/14/2017.
Filed Date: 8/15/17.
Accession Number: 20170815–5045.
Comments Due: 5 p.m. ET 8/28/17.
Docket Numbers: RP17–972–000.
Applicants: Wyoming Interstate
Company, L.L.C.
Description: Wyoming Interstate
Company, L.L.C. submits tariff filing per
385.602: Settlement Agreement in
Docket No. RP17–302–000.

Filings Instituting Proceedings
Docket Numbers: RP17–967–000.
Applicants: Texas Eastern
Transmission, LP.
Description: Texas Eastern
Transmission, LP submits tariff filing
per 154.203: JntStlmtExtAgmt, Dkt#s
RP88–67, 88–81, 88–221, 90–119, 91–4,
17–964.
Filed Date: 08/09/2017.
Accession Number: 20170809–5117.
Comment Date: 5:00 p.m. Eastern
Time on Wednesday, August 16, 2017.
Docket Numbers: RP17–968–000.
Applicants: Northern Natural Gas
Company.
Description: Northern Natural Gas
Company submits tariff filing per
154.204: 20170810 Carlton Flow
Obligations to be effective 11/1/2017.
Filed Date: 08/10/2017.
Accession Number: 20170810–5047.
Comment Date: 5:00 p.m. Eastern
Time on Tuesday, August 22, 2017.
The filings are accessible in the
Commission’s eLibrary system by
clicking on the links or querying the
docket number.
Any person desiring to intervene or
protest in any of the above proceedings
must file in accordance with Rules 211
and 214 of the Commission’s
Regulations (18 CFR 385.211 and
§ 385.214) on or before 5:00 p.m. Eastern
time on the specified comment date.
Protests may be considered, but
intervention is necessary to become a
party to the proceeding.
eFiling is encouraged. More detailed
information relating to filing
requirements, interventions, protests,
service, and qualifying facilities filings
can be found at: http://www.ferc.gov/
docs-filing/efiling/filing-req.pdf. For
other information, call (866) 208–3676
(toll free). For TTY, call (202) 502–8659.

PO 00000

Frm 00035

Fmt 4703

Sfmt 4703

E:\FR\FM\22AUN1.SGM

22AUN1