60d FRN

mstockstill on DSK30JT082PROD with NOTICES

34928

Federal Register / Vol. 82, No. 143 / Thursday, July 27, 2017 / Notices

meet the stringent performance
characteristics for conducting the
experiments. The instrument will be
able to accurately adjust the M1 Mirror
optical surface by applying arbitrary
Zernike correction terms to correct for
telescope errors in addition to polishing
errors and M1 Cell Assembly induced
errors. After optics correction, the total
allowed M1 Mirror optical surface figure
error from all sources other than
polishing residuals shall be less than 45
nm RMS after subtraction of tip tilt and
focus.
Docket Number: 17–007. Applicant:
The Association of Universities for
Research in Astronomy, Boulder, CO
80303. Instrument: Coating and
Cleaning Equipment for the Daniel K.
Inouye Solar Telescope. Manufacturer:
Advanced Mechanical & Optical
Systems, NA, Belgium. Intended Use:
See notice at 82 FR 23191–92, May 22,
2017. Comments: None received.
Decision: Approved. We know of no
instruments of equivalent scientific
value to the foreign instruments
described below, for such purposes as
this is intended to be used, that was
being manufactured in the United States
at the time of order. Reasons: The
instrument will be used to study the
highly dynamic magnetic fields and
plasmas throughout the solar
atmosphere. The M1 Wash Platform
shall be capable of capturing washing
effluent and directing it into a
containment system, which shall
include pumping capacity to move the
effluent from the containment system
into AURA supplied containers, as well
as protect effluent from contaminating
the bottom surface of the M1 Mirror or
any other surface.
Docket Number: 17–008. Applicant:
UChicago Argonne, Lemont, IL 60439.
Instrument: Multiphoton 3D
Lithography System. Manufacturer:
Nanoscribe, Germany. Intended Use:
See notice at 82 FR 23191–92, May 22,
2017. Comments: None received.
Decision: Approved. We know of no
instruments of equivalent scientific
value to the foreign instruments
described below, for such purposes as
this is intended to be used, that was
being manufactured in the United States
at the time of order. Reasons: The
instrument will be used for rapid
fabrication and prototyping of micro
and nano sized parts by the means of
novel technology, two-photon
polymerization of UV-curable
photoresists. The key and unique
features of the instrument include the
highest resolution (150 nanometers)
among all commercially available 3D
printers and ability to deposit a wide
variety of materials template by

VerDate Sep<11>2014

19:17 Jul 26, 2017

Jkt 241001

transparent polymers. The high printing
resolution enables sub-micron feature
sizes and allows a design freedom for
very complex parts with internal
features otherwise impossible to
produce.
Dated: July 24, 2017.
Gregory W. Campbell,
Director, Subsidies Enforcement, Enforcement
and Compliance.
[FR Doc. 2017–15849 Filed 7–26–17; 8:45 am]

Dated: July 24, 2017.
Gregory W. Campbell,
Director, Subsidies Enforcement, Enforcement
and Compliance.
[FR Doc. 2017–15852 Filed 7–26–17; 8:45 am]
BILLING CODE 3510–DS–P

DEPARTMENT OF COMMERCE
National Oceanic and Atmospheric
Administration

BILLING CODE 3510–DS–P

DEPARTMENT OF COMMERCE

Proposed Information Collection;
Comment Request; Alaska Region
Permit Family of Forms

International Trade Administration

AGENCY:

Princeton University, et al. Notice of
Consolidated Decision on Applications
for Duty-Free Entry of Electron
Microscope

SUMMARY:

This is a decision consolidated
pursuant to Section 6(c) of the
Educational, Scientific, and Cultural
Materials Importation Act of 1966
(Pub. L. 89–651, as amended by Pub. L.
106–36; 80 Stat. 897; 15 CFR part 301).
Related records can be viewed between
8:30 a.m. and 5:00 p.m. in Room 3720,
U.S. Department of Commerce, 14th and
Constitution Avenue NW., Washington,
DC.
Docket Number: 16–023. Applicant:
Princeton University, Princeton, NJ
08540. Instrument: Electron Microscope.
Manufacturer: FEI Company, Czech
Republic. Intended Use: See notice at 82
FR 16796–97, April 6, 2017.
Docket Number: 16–024. Applicant:
The Hormel Institute, Austin, MN
55912. Instrument: Electron Microscope.
Manufacturer: FEI Company, the
Netherlands. Intended Use: See notice at
82 FR 23191, May 22, 2017.
Docket Number: 16–025. Applicant:
The Hormel Institute, Austin, MN
55912. Instrument: Electron Microscope.
Manufacturer: FEI Company, Czech
Republic. Intended Use: See notice at 82
FR 23191, May 22, 2017.
Comments: None received. Decision:
Approved. No instrument of equivalent
scientific value to the foreign
instrument, for such purposes as this
instrument is intended to be used, is
being manufactured in the United States
at the time the instrument was ordered.
Reasons: Each foreign instrument is an
electron microscope and is intended for
research or scientific educational uses
requiring an electron microscope. We
know of no electron microscope, or any
other instrument suited to these
purposes, which was being
manufactured in the United States at the
time of order of each instrument.

PO 00000

Frm 00006

Fmt 4703

Sfmt 4703

National Oceanic and
Atmospheric Administration (NOAA),
Commerce.
ACTION: Notice.
The Department of
Commerce, as part of its continuing
effort to reduce paperwork and
respondent burden, invites the general
public and other Federal agencies to
take this opportunity to comment on
proposed and/or continuing information
collections, as required by the
Paperwork Reduction Act of 1995.
DATES: Written comments must be
submitted on or before September 25,
2017.
ADDRESSES: Direct all written comments
to Jennifer Jessup, Departmental
Paperwork Clearance Officer,
Department of Commerce, Room 6616,
14th and Constitution Avenue NW.,
Washington, DC 20230 (or via the
Internet at [email protected]).
FOR FURTHER INFORMATION CONTACT:
Requests for additional information or
copies of the information collection
instrument and instructions should be
directed to Kurt Iverson, (907) 586–7228
or [email protected].
SUPPLEMENTARY INFORMATION:
I. Abstract
This request is for extension of a
current information collection.
For a person to participate in Federal
fisheries, the National Marine Fisheries
Service (NMFS) requires a Federal
Fisheries Permit (FFP), a Federal
Processor Permit (FPP), or an Exempted
Fishing Permit (EFP). NMFS Alaska
Region created a set of commercial
fishing permits that operators of vessels
and managers of processors must have
on board or on site when fishing,
receiving, buying, or processing
groundfish and non-groundfish species.
The permit information provides
harvest gear types; descriptions of
vessels, shoreside processors, and
stationary floating processors; and
expected fishery activity levels. These

E:\FR\FM\27JYN1.SGM

27JYN1

Federal Register / Vol. 82, No. 143 / Thursday, July 27, 2017 / Notices
permits provide NMFS with a way to
monitor participation in Federal
fisheries.
Section 303(b)(1) of the MagnusonStevens Act specifically recognizes the
need for permit issuance. The
requirement of a permit for marine
resource users is one of the regulatory
steps taken to carry out conservation
and management objectives. The
issuance of a permit is an essential
ingredient in the management of fishery
resources needed for identification of
the participants, expected activity
levels, and for regulatory compliance
(e.g., withholding of permit issuance
pending collection of unpaid penalties).
II. Method of Collection
Respondents have a choice of either
electronic or paper forms. Methods of
submittal include mail and facsimile
transmission.
III. Data
OMB Control Number: 0648–0206.
Form Number(s): None.
Type of Review: Regular submission
(extension of a current information
collection).
Affected Public: Business or other
profit organizations; individuals or
households.
Estimated Number of Respondents:
662.
Estimated Time Per Response: Federal
Fisheries Permit, 21 minutes; Federal
Processor Permit, 25 minutes; and
Exempted Fishing Permit, 20 hours.
Estimated Total Annual Burden
Hours: 319 hours.
Estimated Total Annual Cost to
Public: $864 in recordkeeping/reporting
costs.

mstockstill on DSK30JT082PROD with NOTICES

IV. Request for Comments
Comments are invited on: (a) Whether
the proposed collection of information
is necessary for the proper performance
of the functions of the agency, including
whether the information shall have
practical utility; (b) the accuracy of the
agency’s estimate of the burden
(including hours and cost) of the
proposed collection of information; (c)
ways to enhance the quality, utility, and
clarity of the information to be
collected; and (d) ways to minimize the
burden of the collection of information
on respondents, including through the
use of automated collection techniques
or other forms of information
technology.
Comments submitted in response to
this notice will be summarized and/or
included in the request for OMB
approval of this information collection;
they also will become a matter of public
record.

VerDate Sep<11>2014

19:17 Jul 26, 2017

Jkt 241001

Dated: July 24, 2017.
Sarah Brabson,
NOAA PRA Clearance Officer.
[FR Doc. 2017–15813 Filed 7–26–17; 8:45 am]
BILLING CODE 3510–22–P

DEPARTMENT OF COMMERCE
National Oceanic and Atmospheric
Administration
Proposed Information Collection;
Comment Request; Alaska American
Fisheries Act Report
National Oceanic and
Atmospheric Administration (NOAA),
Commerce.
ACTION: Notice.
AGENCY:

The Department of
Commerce, as part of its continuing
effort to reduce paperwork and
respondent burden, invites the general
public and other Federal agencies to
take this opportunity to comment on
proposed and/or continuing information
collections, as required by the
Paperwork Reduction Act of 1995.
DATES: Written comments must be
submitted on or before September 25,
2017.
ADDRESSES: Direct all written comments
to Jennifer Jessup, Departmental
Paperwork Clearance Officer,
Department of Commerce, Room 6616,
14th and Constitution Avenue NW.,
Washington, DC 20230 (or via the
Internet at [email protected]).
FOR FURTHER INFORMATION CONTACT:
Requests for additional information or
copies of the information collection
instrument and instructions should be
directed to Stephanie Warpinski, (907)
586–7228 or stephanie.warpinski@
noaa.gov.
SUPPLEMENTARY INFORMATION:
SUMMARY:

I. Abstract
This request is for extension of a
current information collection.
On October 21, 1998, the President
signed into law The American Fisheries
Act, 16 U.S.C. 1851 (AFA). The AFA
authorizes the formation of fishery
cooperatives in all sectors of the Bering
Sea and Aleutian Islands Management
Area (BSAI) pollock fishery, grants
antitrust exemptions to cooperatives in
the mothership sector, and imposes
operational limits on fishery
cooperatives in the BSAI pollock
fishery. The National Marine Fisheries
Service (NMFS) issues a single pollock
allocation to each cooperative, and the
cooperative may make sub-allocations of
pollock to each individual vessel owner
in the cooperative.

PO 00000

Frm 00007

Fmt 4703

Sfmt 4703

34929

With respect to the fisheries off
Alaska, the AFA Program is a suite of
management measures that fall into four
general regulatory categories:
• Limit access into the fishing and
processing sectors of the BSAI pollock
fishery and that allocate pollock to such
sectors (50 CFR 679.64).
• Govern the formation and operation
of fishery cooperatives in the BSAI
pollock fishery, including filing of
cooperative contracts (50 CFR 679.61
and 679.62).
• Protection of other fisheries from
spillover effects from the AFA (50 CFR
679.64).
• Govern catch measurement and
monitoring in the BSAI pollock fishery,
including filing of annual reports and
completing and submitting inshore
catcher vessel pollock cooperative catch
reports (50 CFR 679.63).
II. Method of Collection
Respondents have a choice of either
electronic or paper forms. Methods of
submittal include email of electronic
forms, and mail and facsimile
transmission of paper forms.
III. Data
OMB Control Number: 0648–0401.
Form Number(s): None.
Type of Review: Regular submission
(extension of a current information
collection).
Affected Public: Business or other forprofit organizations.
Estimated Number of Respondents: 8.
Estimated Time Per Response: AFA
Annual Cooperative Report, AFA
Annual Cooperative Catch Report, and
AFA Cooperative Contract, 8 hours
each; Incentive Plan Agreement, 50
hours; IPA Annual Report, 40 hours;
and IPA appeals, 4 hours.
Estimated Total Annual Burden
Hours: 366 hours.
Estimated Total Annual Cost to
Public: $89 in recordkeeping/reporting
costs.
IV. Request for Comments
Comments are invited on: (a) Whether
the proposed collection of information
is necessary for the proper performance
of the functions of the agency, including
whether the information shall have
practical utility; (b) the accuracy of the
agency’s estimate of the burden
(including hours and cost) of the
proposed collection of information; (c)
ways to enhance the quality, utility, and
clarity of the information to be
collected; and (d) ways to minimize the
burden of the collection of information
on respondents, including through the
use of automated collection techniques
or other forms of information
technology.

E:\FR\FM\27JYN1.SGM

27JYN1