60 Day FR Notice

ethrower on DSK3G9T082PROD with NOTICES

Federal Register / Vol. 82, No. 198 / Monday, October 16, 2017 / Notices
Regulation Affected: 30 CFR 75.1700
(Oil and gas wells).
• Docket Number: M–2014–013–C.
FR Notice: 79 FR 30178 (May 27,
2014).
Petitioner: Consol Pennsylvania Coal
Company, LLC, Consol Energy, Inc.,
CNX Center, 1000 Consol Energy Drive,
Canonsburg, Pennsylvania 15317–6506.
Mine: Harvey Mine (formerly BMX
Mine), MSHA I.D. No. 36–10045,
located in Greene County, Pennsylvania.
Regulation Affected: 30 CFR 75.1700
(Oil and gas wells).
• Docket Number: M–2016–016–C.
FR Notice: 81 FR 47423 (July 21,
2016).
Petitioner: Marshall County Coal
Company, 1 Bridge Street, Monongah,
West Virginia 26554.
Mine: Marshall County Mine, MSHA
I.D. No. 46–01437, located in Marshall
County, West Virginia.
Regulation Affected: 30 CFR 75.1700
(Oil and gas wells).
• Docket Number: M–2016–017–C.
FR Notice: 81 FR 47426 (July 21,
2016).
Petitioner: The Marion County Coal
Company, 1 Bridge Street, Monongah,
West Virginia 26554.
Mine: Marion County Mine, MSHA
I.D. No. 46–01433, located in Marion
County, West Virginia.
Regulation Affected: 30 CFR 75.1700
(Oil and gas wells).
• Docket Number: M–2016–018–C.
FR Notice: 81 FR 47428 (July 21,
2016).
Petitioner: The Monongalia County
Coal Company, 1 Bridge Street,
Monongah, West Virginia 26554.
Mine: Monongalia County Mine,
MSHA I.D. No. 46–01968, located in
Monongalia County, West Virginia.
Regulation Affected: 30 CFR 75.1700
(Oil and gas wells).
• Docket Number: M–2016–019–C.
FR Notice: 81 FR 47431 (July 21,
2016).
Petitioner: The Harrison County Coal
Company, 1 Bridge Street, Monongah,
West Virginia 26554.
Mine: Harrison County Mine, MSHA
I.D. No. 46–01318, located in Marion
County, West Virginia.
Regulation Affected: 30 CFR 75.1700
(Oil and gas wells).
• Docket Number: M–2016–020–C.
FR Notice: 81 FR 47434 (July 21,
2016).
Petitioner: The Ohio County Coal
Company, 1 Bridge Street, Monongah,
West Virginia 26554.
Mine: Ohio County Mine, MSHA I.D.
No. 46–01436, located in Marshall
County, West Virginia.

VerDate Sep<11>2014

16:59 Oct 13, 2017

Jkt 244001

Regulation Affected: 30 CFR 75.1700
(Oil and gas wells).
• Docket Number: M–2016–021–C.
FR Notice: 81 FR 47420 (July 21,
2016).
Petitioner: The Marshall County Coal
Company, 57 Goshorn Woods Road,
Cameron, West Virginia 26033.
Mine: Marshall County Mine, MSHA
I.D. No. 46–01437, located in Marshall
County, West Virginia.
Regulation Affected: 30 CFR
77.1914(a) (Electrical equipment).
• Docket Number: M–2016–024–C.
FR Notice: 81 FR 55490 (August 19,
2016).
Petitioner: Signal Peak Energy, LLC,
100 Portal Drive, Roundup, Montana
59072.
Mine: Bull Mountains Mine #1,
MSHA I.D. No. 24–01950, located in
Musselshell County, Montana.
Regulation Affected: 30 CFR 75.312(c)
(Main mine fan examinations and
records).
• Docket Number: M–2016–025–C.
FR Notice: 81 FR 55491 (August 19,
2016).
Petitioner: Ohio County Coal
Company, 1107 Golden Ridge Road,
Dallas, West Virginia 26036.
Mine: Ohio County Mine, MSHA I.D.
No. 46–01436, located in Marshall
County, West Virginia.
Regulation Affected: 30 CFR
77.1914(a) (Electrical equipment).
• Docket Number: M–2016–036–C.
FR Notice: 81 FR 16066 (March 31,
2017).
Petitioner: Pennyrile Energy, LLC,
7386 State Route 593, Calhoun,
Kentucky 42327.
Mine: Riveredge Mine, MSHA I.D. No.
15–19424, located in McLean County,
Kentucky.
Regulation Affected: 30 CFR 75.1700
(Oil and gas wells).
• Docket Number: M–2016–010–M.
FR Notice: 82 FR 16071 (March 31,
2017).
Petitioner: Fred Weber, Inc., 2320
Creve Coeur Mill Road, Maryland
Heights, Missouri 63043.
Mine: Joliet MI, LLC Mine, MSHA I.D.
No. 11–03153, located in Will County,
Illinois.
Regulation Affected: 30 CFR 49.6(a)(1)
(Equipment and maintenance
requirements).
Sheila McConnell,
Director, Office of Standards, Regulations,
and Variances.
[FR Doc. 2017–22271 Filed 10–13–17; 8:45 am]
BILLING CODE 4520–43–P

PO 00000

Frm 00070

Fmt 4703

Sfmt 4703

48119

DEPARTMENT OF LABOR
Occupational Safety and Health
Administration
[Docket No. OSHA–2011–0064]

Forging Machines; Extension of the
Office of Management and Budget’s
(OMB) Approval of Information
Collection (Paperwork) Requirements
Occupational Safety and Health
Administration (OSHA), Labor.
ACTION: Request for public comment.
AGENCY:

OSHA is soliciting public
comments concerning its proposal to
extend the Office of Management and
Budget’s (OMB) approval of the
information collection requirements
contained in the Forging Machines
Standard.

SUMMARY:

Comments must be submitted
(postmarked, sent, or received) by
December 15, 2017.
ADDRESSES:
Electronically: You may submit
comments and attachments
electronically at http://
www.regulations.gov, the Federal
eRulemaking Portal. Follow the
instructions online for submitting
comments.
Facsimile: If your comments,
including attachments, are not longer
than 10 pages, you may fax them to the
OSHA Docket Office at (202) 693–1648.
Mail, hand delivery, express mail,
messenger, or courier service: When
using these methods, you must submit
a copy of your comments and
attachments to the OSHA Docket Office,
Docket No. OSHA–2011–0064,
Occupational Safety and Health
Administration, U.S. Department of
Labor, Room N–3653, 200 Constitution
Avenue NW., Washington, DC 20210.
Deliveries (hand, express mail,
messenger, and courier service) are
accepted during the Docket Office’s
normal business hours, 10:00 a.m. to
3:00 p.m., ET.
Instructions: All submissions must
include the Agency name and OSHA
docket number for the ICR (OSHA–
2011–0064). All comments, including
any personal information you provide,
are placed in the public docket without
change, and may be made available
online at http://www.regulations.gov.
For further information on submitting
comments, see the ‘‘Public
Participation’’ heading in the section of
this notice titled SUPPLEMENTARY
INFORMATION.
Docket: To read or download
comments or other materials in the
docket, go to http://www.regulations.gov
DATES:

E:\FR\FM\16OCN1.SGM

16OCN1

48120

Federal Register / Vol. 82, No. 198 / Monday, October 16, 2017 / Notices

or the OSHA Docket Office at the
address above. All documents in the
docket (including this Federal Register
notice) are listed in the http://
www.regulations.gov index; however,
some information (e.g., copyrighted
material) is not publicly available to
read or download through the Web site.
All submissions, including copyrighted
material, are available for inspection
and copying at the OSHA Docket Office.
You may also contact Theda Kenney at
the address below to obtain a copy of
the ICR.
FOR FURTHER INFORMATION CONTACT:
Theda Kenney, [email protected]
or Todd Owen, [email protected];
telephone (202) 693–2222.
SUPPLEMENTARY INFORMATION:

ethrower on DSK3G9T082PROD with NOTICES

I. Background
The Department of Labor, as part of its
continuing effort to reduce paperwork
and respondent (i.e., employer) burden,
conducts a preclearance consultation
program to provide the public with an
opportunity to comment on proposed
and continuing information collection
requirements in accordance with the
Paperwork Reduction Act of 1995 (44
U.S.C. 3506(c)(2)(A)). This program
ensures that information is in the
desired format, reporting burden (time
and costs) is minimal, collection
instruments are clearly understood, and
OSHA’s estimate of the information
collection burden is accurate. The
Occupational Safety and Health Act of
1970 (the OSH Act) (29 U.S.C. 651 et
seq.) authorizes information collection
by employers as necessary or
appropriate for enforcement of the Act
or for developing information regarding
the causes and prevention of
occupational injuries, illnesses, and
accidents (29 U.S.C. 657). The OSH Act
also requires that OSHA obtain such
information with minimum burden
upon employers, especially those
operating small businesses, and to
reduce to the maximum extent feasible
unnecessary duplication of efforts in
obtaining information (29 U.S.C. 657).
The following sections describe who
uses the information collected under
each requirement, as well as how they
use it. The purpose of these
requirements is to reduce employees’
risk of death or serious injury by
ensuring that forging machines used by
them are in safe operating condition,
and that employees are able to clearly
and properly identify manually
operated valves and switches.
Inspection of Forging Machines,
Guards, and Point-of-Operation
Protection Devices (paragraphs (a)(2)(i)
and (a)(2)(ii)). Paragraph (a)(2)(i)

VerDate Sep<11>2014

16:59 Oct 13, 2017

Jkt 244001

requires employers to establish periodic
and regular maintenance safety checks,
and to develop and maintain a
certification record of each inspection.
The certification record must include
the date of inspection, the signature of
the person who performed the
inspection, and the serial number (or
other identifier) of the forging machine
inspected. Under paragraph (a)(2)(ii),
employers are to schedule regular and
frequent inspections of guards and
point-of-operation protection devices,
and prepare a certification record of
each inspection that contains the date of
the inspection, the signature of the
person who performed the inspection,
and the serial number (or other
identifier) of the equipment inspected.
These inspection certification records
provide assurance to employers,
employees, and OSHA compliance
officers that forging machines, guards,
and point-of-operation protection
devices have been inspected, and will
operate properly and safely, to prevent
impact injury and death to employees
during forging operations. These records
also provide the most efficient means
for the compliance officers to determine
that an employer is complying with the
Standard.
Identification of Manually Controlled
Valves and Switches (paragraphs (c),
(h)(3), (i)(1) and (i)(2)). These
paragraphs require proper and clear
identification of manually operated
valves and switches on presses,
upsetters, boltheading equipment, and
rivet-making machines, respectively.
Marking valves and switches provide
information to employees to ensure that
they operate the forging machines
correctly and safely.
II. Special Issues for Comment
OSHA has a particular interest in
comments on the following issues:
• Whether the proposed information
collection requirements are necessary
for the proper performance of the
agency’s functions, including whether
the information is useful;
• The accuracy of OSHA’s estimate of
the burden (time and costs) of the
information collection requirements,
including the validity of the
methodology and assumptions used;
• The quality, utility, and clarity of
the information collected; and
• Ways to minimize the burden on
employers who must comply. For
example, by using automated or other
technological information collection
and transmission techniques.
III. Proposed Actions
OSHA is requesting that OMB extend
its approval of the information

PO 00000

Frm 00071

Fmt 4703

Sfmt 4703

collection requirements contained in the
Forging Machines Standard (29 CFR
1910.218). The Agency is requesting an
increase in its current burden hours
from 187,264 hours to 192,053 hours, a
total increase of 4,789 hours. The
adjustment is primarily due to minor
modifications in calculating burden
hours. The Agency will summarize the
comments submitted in response to this
notice and will include this summary in
the request to OMB.
Type of Review: Extension of a
currently approved collection.
Title: Forging Machines (29 CFR
1910.218).
OMB Number: 1218–0228.
Affected Public: Business or other forprofits.
Number of Respondents: 27,700.
Total Responses: 1,440,400.
Frequency of Responses: Biweekly.
Average Time per Response: Various.
Estimated Total Burden Hours:
192,053.
Estimated Cost (Operation and
Maintenance): $0.
IV. Public Participation—Submission of
Comments on This Notice and Internet
Access to Comments and Submissions
You may submit comments in
response to this document as follows:
(1) Electronically at http://
www.regulations.gov, which is the
Federal eRulemaking Portal; (2) by
facsimile (fax); or (3) by hard copy. All
comments, attachments, and other
materials must identify the Agency
name and the OSHA docket number for
the ICR (Docket No. OSHA–2011–0064).
You may supplement submissions by
uploading documents electronically. If
you wish to mail additional materials in
reference to an electronic or facsimile
submission, you must submit them to
the OSHA Docket Office (see the section
of this notice titled ADDRESSES). The
additional materials must clearly
identify your electronic comments and
your name, date, and the docket number
so the Agency can attach them to your
comments.
Because of security procedures, the
use of regular mail may cause a
significant delay in the receipt of
comments. For information about
security procedures concerning the
delivery of materials by hand, express
delivery, messenger, or courier service,
please contact the OSHA Docket Office
at (202) 693–2350 (TTY (877) 889–
5627).
Comments and submissions are
posted without change at http://
www.regulations.gov. Therefore, OSHA
cautions commenters about submitting
personal information such as social
security numbers and dates of birth.

E:\FR\FM\16OCN1.SGM

16OCN1

Federal Register / Vol. 82, No. 198 / Monday, October 16, 2017 / Notices
Although all submissions are listed in
the http://www.regulations.gov index,
some information (e.g., copyrighted
material) is not publicly available to
read or download through this Web site.
All submissions, including
copyrighted material, are available for
inspection and copying at the OSHA
Docket Office. Information on using the
http://www.regulations.gov Web site to
submit comments and access the docket
is available at the Web site’s ‘‘User
Tips’’ link. Contact the OSHA Docket
Office for information about materials
not available through the Web site, and
for assistance in using the Internet to
locate docket submissions.
V. Authority and Signature
Loren Sweatt, Deputy Assistant
Secretary of Labor for Occupational
Safety and Health, directed the
preparation of this notice. The authority
for this notice is the Paperwork
Reduction Act of 1995 (44 U.S.C. 3506
et seq.) and Secretary of Labor’s Order
No. 5–2007 (72 FR 31159).
Signed at Washington, DC, on October 10,
2017.
Loren Sweatt,
Deputy Assistant Secretary of Labor for
Occupational Safety and Health.
[FR Doc. 2017–22269 Filed 10–13–17; 8:45 am]
BILLING CODE 4510–26–P

DEPARTMENT OF LABOR
Occupational Safety and Health
Administration
[Docket No. OSHA–2011–0034]

Subpart A (‘‘General Provisions’’) and
Subpart B (‘‘Confined and Enclosed
Spaces and Other Dangerous
Atmospheres in Shipyard
Employment’’); Extension of the Office
of Management and Budget’s (OMB)
Approval of Information Collection
(Paperwork) Requirements
Occupational Safety and Health
Administration (OSHA), Labor.
ACTION: Request for public comments.
AGENCY:

OSHA solicits public
comments concerning its proposal to
extend the Office of Management and
Budget’s (OMB) approval of the
information collection requirements,
subpart A (‘‘General Provisions’’) and
subpart B (‘‘Confined and Enclosed
Spaces and Other Dangerous
Atmospheres in Shipyard
Employment’’).

ethrower on DSK3G9T082PROD with NOTICES

SUMMARY:

Comments must be submitted
(postmarked, sent, or received) by
December 15, 2017.

DATES:

VerDate Sep<11>2014

16:59 Oct 13, 2017

Jkt 244001

48121

ADDRESSES:

I. Background

Electronically: You may submit
comments and attachments
electronically at http://
www.regulations.gov, which is the
Federal eRulemaking Portal. Follow the
instructions online for submitting
comments.
Facsimile: If your comments,
including attachments, are not longer
than 10 pages you may fax them to the
OSHA Docket Office at (202) 693–1648.
Mail, hand delivery, express mail,
messenger, or courier service: When
using this method, you must submit a
copy of your comments and attachments
to the OSHA Docket Office, Docket No.
OSHA–2011–0034, Occupational Safety
and Health Administration, U.S.
Department of Labor, Room N–3653,
200 Constitution Avenue NW.,
Washington, DC 20210. Deliveries
(hand, express mail, messenger, and
courier service) are accepted during the
Department of Labor’s and Docket
Office’s normal business hours, 10:00
a.m. to 3:00 p.m., e.t.
Instructions: All submissions must
include the Agency name and the OSHA
docket number (OSHA–2011–0034) for
the Information Collection Request
(ICR). All comments, including any
personal information you provide, are
placed in the public docket without
change, and may be made available
online at http://www.regulations.gov.
For further information on submitting
comments see the ‘‘Public
Participation’’ heading in the section of
this notice titled SUPPLEMENTARY
INFORMATION.
Docket: To read or download
comments or other material in the
docket, go to http://www.regulations.gov
or the OSHA Docket Office at the
address above. All documents in the
docket (including this Federal Register
notice) are listed in the http://
www.regulations.gov index; however,
some information (e.g., copyrighted
material) is not publicly available to
read or download from the Web site. All
submissions, including copyrighted
material, are available for inspection
and copying at the OSHA Docket Office.
You may also contact Theda Kenney at
the address below to obtain a copy of
the ICR.

The Department of Labor, as part of its
continuing effort to reduce paperwork
and respondent (i.e., employer) burden,
conducts a preclearance consultation
program to provide the public with an
opportunity to comment on proposed
and continuing information collection
requirements in accord with the
Paperwork Reduction Act of 1995
(PRA–95) (44 U.S.C. 3506(c)(2)(A)). This
program ensures that information is in
the desired format, reporting burden
(time and costs) is minimal, collection
instruments are clearly understood, and
OSHA’s estimate of the information
collection burden is accurate. The
Occupational Safety and Health Act of
1970 (the OSH Act) (29 U.S.C. 651 et
seq.) authorizes information collection
by employers as necessary or
appropriate for enforcement of the Act
or for developing information regarding
the causes and prevention of
occupational injuries, illnesses, and
accidents (29 U.S.C. 657). The OSH Act
also requires that OSHA obtain such
information with minimum burden
upon employers, especially those
operating small businesses, and to
reduce to the maximum extent feasible
unnecessary duplication of efforts in
obtaining information (29 U.S.C. 657).
The following is a description of the
requirements in subparts A and B that
pertain to the collection and retention of
information.
One provision in subpart A contains
paperwork requirements (§ 1915.7).
Section 1915.7(b)(2) specifies that
shipyard employers must maintain a
roster of designated competent persons
(for inspecting and testing spaces
covered by subpart B), or a statement
that a marine chemist will perform these
inspections and tests. Section 1915.7(d)
requires employers to ensure that
competent persons, marine chemists,
and certified industrial hygienists
(CIHs) make a record of each inspection
and test they conduct, post the record
near the covered space while work is in
progress, and retain the record for at
least three months. In addition,
employers must make the roster or
statement, and the inspection and test
records available for inspection by
designated parties.
Subpart B consists of several
standards governing entry into confined
and enclosed spaces and other
dangerous atmospheres in shipyard
employment. These standards require
that employers:
• Ensure that competent persons
conduct inspections and atmospheric
testing prior to workers entering a

FOR FURTHER INFORMATION CONTACT:

Theda Kenney or Todd Owen,
Directorate of Standards and Guidance,
OSHA, U.S. Department of Labor, Room
N–3609, 200 Constitution Avenue NW.,
Washington, DC 20210; telephone (202)
693–2222.
SUPPLEMENTARY INFORMATION:

PO 00000

Frm 00072

Fmt 4703

Sfmt 4703

E:\FR\FM\16OCN1.SGM

16OCN1