30-day FRN

0397 30d frn pub 052418_24085.pdf

Application Form for Membership on a National Marine Sanctuary Advisory Council

30-day FRN

OMB: 0648-0397

Document [pdf]
Download: pdf | pdf
sradovich on DSK3GMQ082PROD with NOTICES

Federal Register / Vol. 83, No. 101 / Thursday, May 24, 2018 / Notices
Customs duties also could possibly be
deferred or reduced on foreign-status
production equipment.
The materials/components sourced
from abroad include: Plastic hoses;
decals; plastic O-rings/seals; rubber
hoses not reinforced or otherwise
combined with other materials, with
fittings; rubber hoses reinforced or
otherwise combined only with textile
materials; rubber hoses reinforced or
otherwise combined with other
material; endless transmission belts of
trapezoidal cross section (V-belts), other
than V-ribbed, of an outside
circumference exceeding 60 cm but not
exceeding 180 cm; endless transmission
belts of trapezoidal cross section (Vbelts and belting); rubber floor mats;
rubber O-rings/seals; rubber bushings;
rubber caps; rubber trim; rubber
isolators; steel socket bolts; steel eye
bolts; steel SEMS bolts; steel U-bolts;
steel screws; steel SEMS screws; steel
nuts; steel U-nuts; steel screws that act
as nuts; steel spring washers; retainer
steel washers; disc steel washers; spacer
steel washers; steel washers; steel
cotters; steel cotter pins; steel pins; steel
stoppers; steel track springs; steel rings;
steel holders; steel spacers; steel clamps;
steel plugs; steel clips; steel caps; steel
bands; steel tool boxes; steel catches;
steel latches; steel locks; engines; steel
hydraulic cylinders; steel hydraulic
motors; adapters for hydraulic cylinders
and motors; steel hydraulic cylinder and
motor parts (couplings; elbows; pipes;
reducers; and, tees); hydraulic fluid
power pumps; compressors; air
conditioner hoses; air conditioner
condensers; fuel/oil filters; receiverdryer used in air conditioning systems;
air filters; filter floats; filter screens;
steel forestry machinery parts (arms;
booms; anchors; bands; shaped, welded
boss attachments; brackets; cabs; caps;
cases; center joints; coolers; covers;
ducts; fuel coolers; guides; intercoolers;
links; manifolds; oil coolers; pins;
exhaust pipes; air pipes; water pipes;
fuel pipes; plates; thrust plates;
radiators; rings; upper rollers; lower
rollers; shrouds; shims; stays; stoppers;
urea tanks; water tanks; trays; and,
shoes for the tracks); other forestry
machinery parts (decomposition tubes;
floats of steel and rubber; handles of PC/
ABS alloy; iron levers; roll over
protection service plates; textile seat
belts); control valves; ball valves;
solenoid valves; manifold blocks; plain
metal bushings; steel bushings; pulleys;
swing bearings; gaskets made of metal
sheeting; horns/alarms; sensors, such as
thermistors; battery relays; electrical
switches; sockets; controllers; wire
harness; temperature sensors; pressure

VerDate Sep<11>2014

18:10 May 23, 2018

Jkt 244001

sensors; and, electric lighters (duty rate
ranges from duty-free to 8.5%).
Public comment is invited from
interested parties. Submissions shall be
addressed to the Board’s Executive
Secretary at the address below. The
closing period for their receipt is July 3,
2018.
A copy of the notification will be
available for public inspection at the
Office of the Executive Secretary,
Foreign-Trade Zones Board, Room
21013, U.S. Department of Commerce,
1401 Constitution Avenue NW,
Washington, DC 20230–0002, and in the
‘‘Reading Room’’ section of the Board’s
website, which is accessible via
www.trade.gov/ftz.
For further information, contact
Juanita Chen at [email protected]
or 202–482–1378.
Dated: May 18, 2018.
Elizabeth Whiteman,
Acting Executive Secretary.
[FR Doc. 2018–11136 Filed 5–23–18; 8:45 am]
BILLING CODE 3510–DS–P

DEPARTMENT OF COMMERCE
National Oceanic and Atmospheric
Administration
Submission for OMB Review;
Comment Request
The Department of Commerce will
submit to the Office of Management and
Budget (OMB) for clearance the
following proposal for collection of
information under the provisions of the
Paperwork Reduction Act (44 U.S.C.
Chapter 35).
Agency: National Oceanic and
Atmospheric Administration (NOAA).
Title: Application Forms for
Membership on a National Marine
Sanctuary Advisory Council.
OMB Control Number: 0648–0397.
Form Number(s): None.
Type of Request: Regular (revision
and extension of a currently approved
information collection).
Number of Respondents: 520.
Average Hours per Response: One
hour.
Burden Hours: 520.
Needs and Uses: This request is for a
revision and extension of a currently
approved information collection.
Section 315 of the National Marine
Sanctuaries Act (NMSA) (16 U.S.C.
1445a) allows the Secretary of
Commerce to establish one or more
advisory councils to provide advice to
the Secretary regarding the designation
and management of national marine
sanctuaries. Executive Order 13178
similarly established a Coral Reef

PO 00000

Frm 00005

Fmt 4703

Sfmt 9990

24085

Ecosystem Reserve Council pursuant to
the NMSA for the Northwestern
Hawaiian Islands Coral Reef Ecosystem
Reserve. Councils are individually
chartered for each site to meet its
specific needs. Once an advisory
council has been chartered, a sanctuary
superintendent starts a process to
recruit members for that council by
providing notice to the public and
requesting interested parties to apply for
the available seat(s) (e.g., Research,
Education) and position(s) (i.e., council
member or alternate). The information
obtained through this application
process will be used to determine the
qualifications of the applicant for
membership on the advisory council.
Two application forms are currently
associated with this information
collection: (a) National Marine
Sanctuary Advisory Council
Application form; and (b) National
Marine Sanctuary Advisory Council
Youth Seat Application form. These
application forms are currently being
revised to ensure consistency between
forms, as well as clarify the information
and supplemental materials to be
submitted by applicants. Application
form instructions will specify
requirements imposed upon the agency
when reviewing applicants as potential
council members or alternates,
including the need to assess potential
conflicts of interest (or other issues) and
the applicant’s status as a federally
registered lobbyist. Specific questions
posed to applicants will be reordered,
reworded and, at times, condensed to
improve the organization of applicant
responses and, thereby, simplify the
applicant review process.
Affected Public: Individuals or
households; business or other for-profit
organizations; not-for-profit institutions;
state, local or tribal government, federal
government.
Frequency: On occasion.
Respondent’s Obligation: Voluntary.
This information collection request
may be viewed at reginfo.gov. Follow
the instructions to view Department of
Commerce collections currently under
review by OMB.
Written comments and
recommendations for the proposed
information collection should be sent
within 30 days of publication of this
notice to OIRA_Submission@
omb.eop.gov or fax to (202) 395–5806.
Dated: May 21, 2018.
Sarah Brabson,
NOAA PRA Clearance Officer.
[FR Doc. 2018–11116 Filed 5–23–18; 8:45 am]
BILLING CODE 3510–NK–P

E:\FR\FM\24MYN1.SGM

24MYN1


File Typeapplication/pdf
File Modified2018-05-24
File Created2018-05-23

© 2024 OMB.report | Privacy Policy