Procedures to submit Rebuttals, Surrebuttals for Exclusions and Objections to Section 232 Adjustments for Steel and Aluminum

OMB Control Number: XXXX-YYYY

Expiration Date: 9/12/2018

Rebuttal to Objection Filed Against Request for Exclusion from Remedies: Section 232 National Security Investigation of Steel Imports
Rebuttal Requirements: Only individuals or organizations who submitted a product exclusion request and where that request received objections may submit a rebuttal. For a rebuttal to be considered, the rebuttal filer must provide the Exclusion Request Identification number and the Objection to the Exclusion Request Identification
number. Rebuttals must be submitted using this Excel-based document. Paper submissions will not be accepted. Please do not tamper with this Excel-based document, e.g., unprotect sheets, delete or add tabs, delete or add rows or columns, override data validation, etc. or your submission may not be accepted.
A separate Rebuttal Excel-based document must be submitted on each distinct Objection to the Exclusion Request. Rebuttals will not be considered if the applicant: 1) does not sufficiently address the specified reporting requirements in sections 1.a - 2.e of the Excel-based document; 2) fails to address whether the rebuttal addresses a
substitute or identical product, or 3) fails to indicate the basis for the rebuttal.
Organizations electing to attach supporting documents must provide these documents in PDF format and it must not exceed 10 pages. All information submitted in the Exclusion Request is subject to public disclosure. If you are submitting confidential business information, please attach the public version of that document to the
Rebuttal, in accordance with the recent interim final rule. Please submit no more than 5 pages of supporting CBI documentation via email.
Organizations should upload their completed rebuttal Excel-based document pertaining to an Objection to a Steel Exclusion Request and any supporting documents to www.regulations.gov under Docket Number BIS-2018-0006. For questions related directly to completing this form, please contact BIS via email ([email protected]) or
telephone (202-482-4757).
This form and any attached supporting documents will be made available to the public on Regulations.gov.

Rebuttal of Objections Filed Against An Exclusion Request

Section
1.a
1.b
1.c

Regulations.Gov Exclusion Request Identification #, e.g., BIS-2018-0006-99999
Objection to Exclusion Request Identification #, e.g., BIS-2018-0006-99999
Does this rebuttal address a substitute or an identical product?

1.d

Are you submitting confidential business information with this form?
(If yes, please email it to [email protected] and submit the public version along with this form. Confidential
business information related to this rebuttal will not be made available to the public on Regulations.gov)

2.a
2.b

Manufacturing Time
Quality

Case Information

The basis of your rebuttal is for the following reason(s):

2.c

Available Quantity

2.d

Delivery Time

2.e

Other (limit: 100 characters)

Bases for Rebuttal of Objection Filings
MANUFACTURING TIME
Challenging the Objector's assertion that:

3
3.a
3.b
3.c
3.d
3.e

Please provide a brief explanation of your challenge to the product manufacturing time (limit: 1,000 characters)

The product is currently made in the U.S. or can be manufactured at U.S. facilities within approximately eight weeks.
The Objector does not currently manufacture the identified steel product at U.S. facilities, but states the time period
within which they can do so.
The Objector can currently manufacture an acceptable substitute product at U.S. facilities within approximately eight
weeks.
The Objector does not currently manufacture an acceptable substitute product at U.S. facilities, but states the time
period within which they can produce an acceptable substitute steel product.
The Objector can manufacture the steel product within the time frame stated in their Objection filing.

QUALITY
Challenging the Objector's assertion that their product is interchangeable with respect to its:

4
4.a

Chemical composition

4.b

Dimensional specifications

4.c

Strength

4.d

Toughness

4.e

Ductility

4.f

Magnetic permeability

4.g

Surface finish

4.h

Coatings and composition

4.i

Other technical specifications (e.g., end-use requirements)

5

Cause for Rebuttal to Objection
Submission

AVAILABLE QUANTITY
Challenging the Objector's assertion that:

5.a

Domestic steel product is available in sufficient quantity.

5.b

The Objector can supply the percentage of steel product stated in their Objection filing.

5.c

U.S. manufacturers have the capability to manufacture the identified steel product.

Please provide a brief explanation of your challenge to the product manufacturing time (limit: 1,000 characters)

Please provide a brief explanation of your challenge to the product manufacturing time (limit: 1,000 characters)

5.d

6

The Objector has sold or has attempted to sell the steel product described in the Exclusion Request.

DELIVERY TIME
Challenging the Objector's assertion that:

6.a

Domestic steel product is available for timely delivery from the time the purchase order is received until the product is
ready to ship.

6.b

Domestic steel product is available for timely delivery from manufacturing plant to loading dock.

Please provide a brief explanation of your challenge to the product manufacturing time (limit: 1,000 characters)

Instruction: This Exclusion Request must be signed by an organization official specifically authorized to certify the document as being accurate and complete.
CERTIFICATION
The undersigned certifies that the information herein supplied in response to this questionnaire is complete and correct to the best of his/her knowledge. It is a criminal offense to willfully make a false statement or representation to any department or agency of the United States Government as to any
Company Name:
Name of Authorizing Official:
Title of Authorizing
Email of Authorizing Official:
Phone Number:
If the Point of Contact is different from the Authorizing Official provide point-of-contact information below.
Point-of-Contact Name:
Title
Phone
E-Mail Address:
Number
Paperwork Reduction Act Notice
Per the Paperwork Reduction Act of 1995, public reporting burden for this collection of information is estimated to average 4 hours per response, including the time to review instructions, search existing data sources, gather and maintain data needed, and complete and review the collection of information. Send comments regarding this burden
estimate or any other aspects of this collection of information, to 1401 Constitution Avenue, NW, HCHB 1093, Office of Technology Evaluation, Bureau of Industry and Security, U.S. Department of Commerce, Washington, DC 20230 attn: 0694-0139. Commerce may not collect this information, and you are not required to respond; unless this OMB
number is displayed.