1219-0121 PUBLISHED 60 Day FRN

33254

Federal Register / Vol. 83, No. 137 / Tuesday, July 17, 2018 / Notices

information collection request; they will
also become a matter of public record.
Sheila McConnell,
Certifying Officer.
[FR Doc. 2018–15217 Filed 7–16–18; 8:45 am]
BILLING CODE 4510–43–P

Sheila McConnell, Director, Office of
Standards, Regulations, and Variances,
MSHA, at
[email protected]
(email); (202) 693–9440 (voice); or (202)
693–9441 (facsimile).
SUPPLEMENTARY INFORMATION:

DEPARTMENT OF LABOR

I. Background

Mine Safety and Health Administration

Section 103(h) of the Federal Mine
Safety and Health Act of 1977 (Mine
Act), 30 U.S.C. 813(h), authorizes
MSHA to collect information necessary
to carry out its duty in protecting the
safety and health of miners. Further,
section 101(a) of the Mine Act, 30 U.S.C.
811, authorizes the Secretary of Labor
(Secretary) to develop, promulgate, and
revise as may be appropriate, improved
mandatory health or safety standards for
the protection of life and prevention of
injuries in coal and metal and nonmetal
mines.
Accidents involving falls of roof, face,
and rib in underground mines or falls of
highwall in surface mines, historically,
have been among the leading causes of
injuries and deaths. Prevention or
control of falls of roof, face, and rib is
uniquely difficult because of the variety
of conditions encountered in mines that
can affect the stability of various types
of strata and the changing nature of the
forces affecting ground stability at any
given operation and time. Roof and rock
bolts and accessories are an integral part
of ground control systems and are used
to prevent the fall of roof, face, and rib.
Advancements in technology of roof and
rock bolts and accessories have aided in
reducing the hazards associated with
falls of roof, face, and rib.
The American Society for Testing and
Materials (ASTM) publication
‘‘Standard Specification for Roof and
Rock Bolts and Accessories’’ is a
consensus standard used throughout the
United States. It contains specifications
for the chemical, mechanical, and
dimensional requirements for roof and
rock bolts and accessories used for
ground support systems. The ASTM
standard for roof and rock bolts and
accessories is updated periodically to
reflect advances in technology.
Title 30 Code of Federal Regulations,
Parts 56 and 57 Subpart B-Ground
Control, section 56.3203 and section
57.3203, and Part 75 Subpart C-Roof
Support, section 75.204, address the
quality of roof and rock bolts and
accessories and their installation.
MSHA’s objective in these regulations is
to ensure the quality and effectiveness
of roof and rock bolts and accessories
and, as technology evolves, to allow for
the use of new materials which are

[OMB Control No. 1219–0121]

Proposed Extension of Information
Collection; Safety Standards for Roof
Bolts in Metal and Nonmetal Mines and
Underground Coal Mines
Mine Safety and Health
Administration, Labor.
ACTION: Request for public comments.
AGENCY:

The Department of Labor, as
part of its continuing effort to reduce
paperwork and respondent burden,
conducts a pre-clearance consultation
program to provide the general public
and Federal agencies with an
opportunity to comment on proposed
collections of information in accordance
with the Paperwork Reduction Act of
1995. This program helps to ensure that
requested data can be provided in the
desired format, reporting burden (time
and financial resources) is minimized,
collection instruments are clearly
understood, and the impact of collection
requirements on respondents can be
properly assessed. Currently, the Mine
Safety and Health Administration
(MSHA) is soliciting comments on the
information collection for Safety
Standards for Roof Bolts in Metal and
Nonmetal Mines and Underground Coal
Mines.
DATES: All comments must be received
on or before September 17, 2018.
ADDRESSES: Comments concerning the
information collection requirements of
this notice may be sent by any of the
methods listed below.
• Federal E-Rulemaking Portal:
http://www.regulations.gov. Follow the
on-line instructions for submitting
comments for docket number MSHA–
2018–0027.
• Regular Mail: Send comments to
USDOL–MSHA, Office of Standards,
Regulations, and Variances, 201 12th
Street South, Suite 4E401, Arlington,
VA 22202–5452.
• Hand Delivery: USDOL-Mine Safety
and Health Administration, 201 12th
Street South, Suite 4E401, Arlington,
VA 22202–5452. Sign in at the
receptionist’s desk on the 4th floor via
the East elevator.
SUMMARY:

daltland on DSKBBV9HB2PROD with NOTICES

FOR FURTHER INFORMATION CONTACT:

VerDate Sep<11>2014

17:07 Jul 16, 2018

Jkt 244001

PO 00000

Frm 00063

Fmt 4703

Sfmt 4703

proven to be reliable and effective in
controlling the mine roof, face, and rib.
Title 30 CFR 56.3203(a), 57.3203(a),
and 75.204(a) require: (1) That mine
operators obtain a certification from the
manufacturer that roof and rock bolts
and accessories are manufactured and
tested in accordance with the applicable
ASTM specifications, and (2) that the
manufacturer’s certification is made
available to an authorized representative
of the Secretary.
Title 30 CFR 56.3203(h) and
57.3203(h) require that if the mine
operator uses other tensioned and
nontensioned fixtures and accessories
for ground control that are not
addressed by the applicable ASTM
standard listed in sections 56.3203(a)
and 57.3203(a), test methods must be
established by the mine operator and
used to verify their ground control
effectiveness. Title 30 CFR 56.3203(i)
and 57.3203(i) require that the mine
operator certify that the tests developed
under sections 56.3203(h) and
57.3203(h) were conducted and such
certifications be made available to an
authorized representative of the
Secretary.
Title 30 CFR 75.204(f)(6) requires that
the mine operator or a person
designated by the operator certify by
signature and date the measurements
required by paragraph (f)(5) of this
section have been made. Paragraph (f)(5)
requires that in working places from
which coal is produced during any
portion of a 24-hour period, the actual
torque or tension on at least one out of
every ten previously installed
mechanically anchored tensioned roof
bolts is measured from the outby corner
of the last open crosscut to the face in
each advancing section. This
certification shall be maintained for at
least one year and shall be made
available to an authorized representative
of the Secretary and representatives of
the miners.
MSHA has found that the certification
requirements have been successful in
maintaining compliance with
requirements for roof and rock bolts and
accessories.
II. Desired Focus of Comments
MSHA is soliciting comments
concerning the proposed information
collection related to Safety Standards
for Roof Bolts in Metal and Nonmetal
Mines and Underground Coal Mines.
MSHA is particularly interested in
comments that:
• Evaluate whether the collection of
information is necessary for the proper
performance of the functions of the
Agency, including whether the
information has practical utility;

E:\FR\FM\17JYN1.SGM

17JYN1

Federal Register / Vol. 83, No. 137 / Tuesday, July 17, 2018 / Notices
• Evaluate the accuracy of MSHA’s
estimate of the burden of the collection
of information, including the validity of
the methodology and assumptions used;
• Suggest methods to enhance the
quality, utility, and clarity of the
information to be collected; and
• Minimize the burden of the
collection of information on those who
are to respond, including through the
use of appropriate automated,
electronic, mechanical, or other
technological collection techniques or
other forms of information technology,
e.g., permitting electronic submission of
responses.
The information collection request
will be available on http://
www.regulations.gov. MSHA cautions
the commenter against providing any
information in the submission that
should not be publicly disclosed. Full
comments, including personal
information provided, will be made
available on www.regulations.gov and
www.reginfo.gov.
The public may also examine publicly
available documents at USDOL-Mine
Safety and Health Administration, 201
12th South, Suite 4E401, Arlington, VA
22202–5452. Sign in at the receptionist’s
desk on the 4th floor via the East
elevator.
Questions about the information
collection requirements may be directed
to the person listed in the FOR FURTHER
INFORMATION CONTACT section of this
notice.

daltland on DSKBBV9HB2PROD with NOTICES

III. Current Actions
This request for collection of
information contains provisions for
Safety Standards for Roof Bolts in Metal
and Nonmetal Mines and Underground
Coal Mines. MSHA has updated the data
with respect to the number of
respondents, responses, burden hours,
and burden costs supporting this
information collection request.
Type of Review: Extension, without
change, of a currently approved
collection.
Agency: Mine Safety and Health
Administration.
OMB Number: 1219–0121.
Affected Public: Business or other forprofit.
Number of Respondents: 452.
Frequency: On occasion.
Number of Responses: 61,086.
Annual Burden Hours: 585 hours.
Annual Respondent or Recordkeeper
Cost: $0.
Comments submitted in response to
this notice will be summarized and
included in the request for Office of
Management and Budget approval of the

VerDate Sep<11>2014

17:07 Jul 16, 2018

Jkt 244001

information collection request; they will
also become a matter of public record.
Sheila McConnell,
Certifying Officer.
[FR Doc. 2018–15216 Filed 7–16–18; 8:45 am]
BILLING CODE 4510–43–P

Cumulative Report of Rescissions
Proposals Pursuant to the
Congressional Budget and
Impoundment Control Act of 1974
Executive Office of the
President, Office of Management and
Budget.
ACTION: Notice of monthly cumulative
report pursuant to the Congressional
Budget and Impoundment Control Act
of 1974.
AGENCY:

Pursuant to the Congressional
Budget and Impoundment Control Act
of 1974, OMB is issuing a monthly
cumulative report (for July, 2018) from
the Director detailing the status of
rescission proposals that were
previously transmitted to the Congress
on May 8, 2018, and amended by the
supplementary message transmitted on
June 5, 2018.
DATES: Release Date: July 10, 2018.
ADDRESSES: The July, 2018 cumulative
report is available on-line on the OMB
website at: https://www.whitehouse.gov/
omb/budget-rescissions-deferrals/.
FOR FURTHER INFORMATION CONTACT:
Jessica Andreasen, 6001 New Executive
Office Building, Washington, DC 20503,
Email address: jandreasen@
omb.eop.gov, telephone number: (202)
395–3645. Because of delays in the
receipt of regular mail related to
security screening, respondents are
encouraged to use electronic
communications.
SUMMARY:

John Mulvaney,
Director.
[FR Doc. 2018–15238 Filed 7–16–18; 8:45 am]
BILLING CODE 3110–01–P

NATIONAL FOUNDATION ON THE
ARTS AND THE HUMANITIES
National Endowment for the Arts
Arts Advisory Panel Meetings
National Endowment for the
Arts, National Foundation on the Arts
and the Humanities.
ACTION: Notice of meetings.
AGENCY:

Frm 00064

Fmt 4703

Pursuant to the Federal
Advisory Committee Act, as amended,
notice is hereby given that 5 meetings of
the Arts Advisory Panel to the National
Council on the Arts will be held by
teleconference.

SUMMARY:

DATES: See the SUPPLEMENTARY
INFORMATION section for individual

OFFICE OF MANAGEMENT AND
BUDGET

PO 00000

33255

Sfmt 4703

meeting times and dates. All meetings
are Eastern time and ending times are
approximate:
National Endowment for the
Arts, Constitution Center, 400 7th St.
SW, Washington, DC 20506.
FOR FURTHER INFORMATION CONTACT:
Further information with reference to
these meetings can be obtained from Ms.
Sherry Hale, Office of Guidelines &
Panel Operations, National Endowment
for the Arts, Washington, DC 20506;
[email protected], or call 202–682–5696.
SUPPLEMENTARY INFORMATION: The
closed portions of meetings are for the
purpose of Panel review, discussion,
evaluation, and recommendations on
financial assistance under the National
Foundation on the Arts and the
Humanities Act of 1965, as amended,
including information given in
confidence to the agency. In accordance
with the determination of the Chairman
of July 5, 2016, these sessions will be
closed to the public pursuant to
subsection (c)(6) of section 552b of title
5, United States Code.
The upcoming meetings are:
Literature (review of applications):
This meeting will be closed.
Date and time: August 1, 2018; 1:00
p.m. to 3:00 p.m.
Literature (review of applications):
This meeting will be closed.
Date and time: August 2, 2018; 1:00
p.m. to 3:00 p.m.
Research Labs (review of
applications): This meeting will be
closed.
Date and time: August 16, 2018; 11:00
a.m. to 1:00 p.m.
Research Labs (review of
applications): This meeting will be
closed.
Date and time: August 17, 2018; 11:00
a.m. to 1:00 p.m.
Research Labs (review of
applications): This meeting will be
closed.
Date and time: August 17, 2018; 2:30
p.m. to 4:30 p.m.
ADDRESSES:

Dated: July 11, 2018.
Sherry Hale,
Staff Assistant, National Endowment for the
Arts.
[FR Doc. 2018–15166 Filed 7–16–18; 8:45 am]
BILLING CODE 7537–01–P

E:\FR\FM\17JYN1.SGM

17JYN1