Form FRA 6180.14 FRA 6180.14 False Proceed Signal Report

OMB No. 2130-0006
Public reporting burden for this information collection is estimated to average 15 minutes per response, including the time for reviewing instructions, searching existing data
sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. According to the Paperwork Reduction Act of 1995, a
federal agency may not conduct or sponsor, and a person is not required to respond to, nor shall a person be subject to a penalty for failure to comply with, a collection of
information unless it displays a currently valid OMB control number. The valid OMB control number for this information collection is 2130-0006. All responses to this
collection of information are voluntary. Send comments regarding this burden estimate or any other aspect of this collection, including suggestions for reducing this burden
to: Information Collection Officer, Federal Railroad Administration, 1200 New Jersey Ave., N.W., Washington D.C. 20590.
DATE (month/day/year)

Department Of Transportation
Federal Railroad Administration
FALSE PROCEED SIGNAL REPORT

REPORTING RAILROAD (railroad & region or division)

All railroads subject to Regulations of the Federal Railroad Administration shall submit a
false proceed signal report, original only, to the Federal Railroad Administration within
fifteen days after a false proceed occurs.
Copies of this form can be obtained from the Department of Transportation, Federal Railroad
Administration, Office of Safety, Washington, D.C. 20590, or available at
http://safetydata.fra.dot.gov/OfficeofSafety/Forms/Default.asp

MAIL TO: (FRA Regional headquarters where the railroad’s reporting office is located)

A failure should not be counted more than one time in items 1, 2, 3, and 4; the failure
should be classified under the basic system or appliance of which it forms an essential
part. E.g.: assume grounds cause a block signal to indicate a false proceed causing
corresponding indications of a cab signal system on each train approaching this point,
such failures should be included in item 1, Block System.

A false proceed failure is a failure of an appliance, device, method, or system
to function or indicate as required by Title 49 CFR Part 236, that results in a more
favorable aspect than intended or other condition hazardous to the movement of a
train.

TYPE OF SYSTEM

DATE

LOCOMOTIVE
NUMBER

REPORTING OFFICER (signature & title)

The following abbreviations may be used in the report .
A – Automatic
AB – Automatic block
ACS – Automatic cab signal
APB – Absolute permissive block
ATC – Automatic train control
ATS – Automatic train stop
CL – Color Light
CPL – Color position light
E – Electric

DEVICE THAT
FAILED

1 - BLOCK SYSTEMS
AB

APB

TC

2 - INTERLOCKING
Automatic

Remote

Manual

3 - AUTOMATIC SYSTEMS
ATS

ATC

ACS

PTC

4 - OTHER (specify)

NATURE AND CAUSE OF FAILURE AND CORRECTIVE ACTION TAKEN:

(If more space is required, continue on reverse)

FORM FRA F 6180.14 (Rev. 6/03)

OMB approval expires 12/31/2018

EM – Electro-mechanical
EP – Electro-pneumatic
FP – False proceed
MB – Manual block
M – Mechanical
P – Pneumatic
PL – Position light
PTC – Positive train control
SA – Semi automatic
TC – Traffic Control

LOCATION (city and state)