Form 0920-21BA US NAC Webinar Polling Questions

Generic Clearance for the Collection of Qualitative Feedback on Agency Service Delivery

2020_2021 US NAC Webinar Polling Questions_For clearance

National Authority for Containment of Poliovirus 2020 Poliovirus Containment Webinar Participant Feedback Polling Questions and Survey

OMB: 0920-1050

Document [docx]
Download: docx | pdf

NAC Webinar Survey/Polling Questions


  1. My facility changed operations due to COVID-19 as follows: (select all that apply)

  • Laboratory stopped work

  • Limited staff onsite

  • Changes to cleaning/decontamination practices

  • Changes to PPE

  • Other

  • None


  1. My facility has: (select all that apply)

  • PV infectious materials

  • PV potentially infectious materials (PIM) [e.g., fecal, respiratory, environmental specimens]

  • Nucleic acids extracted from the materials listed above

  • nOPV2

  • S19

  • No PV relevant materials right now but future work is planned

  • Unsure

  1. Has your facility submitted any of the following types of surveys? (Select all that apply)

  • Institution-level (single survey for all labs, facility wide)

  • Campus-level (individual surveys for each/all of the facility’s sites)

  • Campus-level (individual surveys for only some of the facility’s sites)

  • Department level (all labs within my department)

  • Laboratory-level (each lab submitted their own survey)

  • Unsure


  1. How likely is it that your facility can coordinate a full institution-level survey? (Select one)

  • Very likely - Not challenging at all

  • Somewhat likely - It would take some time, but we could do it

  • Unlikely - Too difficult to achieve/We don’t have the resources

  • Unsure


  1. How do you use your collection of PIM samples? (check all that apply)

  • Retrospective studies

  • Discovery of new viruses

  • Assay development

  • Reference collection

  • Environmental surveillance

  • Storage only

  • Other

  • We do not have PIM


  1. The WHO risk level for our work with PIM is: (if have multiple PIM types/procedures, select highest level)

  • High (WPV/VDPV PIM)

  • Moderate (e.g., OPV/Sabin PIM - fecal sample inoculation in PV-permissive cells)

  • Low (e.g., OPV/Sabin PIM - respiratory sample inoculation in PV-permissive cells)

  • Lowest (e.g., OPV/Sabin PIM - extracted nucleic acids used in PCR)

  • Storage only

  • Unsure

  • We do not have PIM


  1. My facility considers the risks associated with our PIM work as: (if have multiple PIM types/procedures, select highest level)

  • High

  • Moderate

  • Low

  • Lowest

  • Storage only

  • Unsure

  • We do not have PIM


  1. I feel the WHO risk level classification for PIM is appropriate.

  • Strongly agree

  • Agree

  • Neither agree or disagree

  • Disagree

  • Strongly disagree


  1. The appropriate laboratory containment practices for wild or vaccine derived PIM should be: (select best answer)

  • GAPIII containment

  • Same as WHO OPV/Sabin PIM guidance

  • BSL-3 standards (BMBL)

  • BSL-2 standards (BMBL)

  • Combination of practices

  • Unsure


  1. My PIM collection has important scientific value and serves a critical national or international function.

  • Strongly agree

  • Agree

  • Neither agree or disagree

  • Disagree

  • Strongly disagree

  • We do not have PIM


  1. Destroying or extracting nucleic acids from PIM will not permit our facility to perform critical studies including:

Shape1

Text box – 200 words maximum




  1. The recommended modifications to nucleic acid extraction methods: (select all that apply)

  • Will allow us to inactivate our entire PIM collection

  • Will allow us to inactivate some PIM samples

  • Require internal validation for our testing protocols

  • Require coordination with collaborators if we make these changes

  • Not applicable to our work

  • Unsure


  1. Which of the following proposed policies is the highest priority for your facility?

  • Incident response

  • Occupational health (immunizations)

  • PIM Guidance for U.S. facilities

  • Unsure


  1. How do you share PV materials with collaborators? (select all that apply)

  • Intra-facility with other labs

  • Domestic collaborators

  • International collaborators

  • We do not share our collection


  1. Once containment is required, my facility plans to:

  • Complete work

  • Continue work (seek ICC/CC)

  • Undecided


  1. My facility has the following enhanced physical lab features for PV materials: (select all that apply)

  • Anteroom/Airlock

  • Inward directional airflow

  • Exit shower

  • Pass-through autoclave

  • Effluent decontamination system

  • Sealable for gaseous decontamination

  • None of the above


  1. Occupational health requirements for working with poliovirus materials at my facility include: (select all that apply)

  • Verification of childhood PV immunization records

  • Adult IPV booster

  • IPV booster every 3 years

  • Baseline PV serum neutralizing antibody titers ≥ 1:8

  • Annual PV serum neutralizing antibody titers ≥ 1:8

  • None of the above

  • Unsure


  1. Security controls for poliovirus materials at my facility include: (select all that apply)

  • Locked freezers

  • Limited access to laboratory or storage areas

  • Biosecurity training

  • Personnel reliability program

  • None of the above

  • Unsure


  1. What does 10% bleach mean in free chlorine parts per million (ppm)?

  • 52,500 ppm

  • 25,000 ppm

  • 10,000 ppm

  • 5,250 ppm

  • 2,500 ppm

  • Unsure


  1. NAC recommends using at least _______ free chlorine parts per million (ppm) for PV decontamination.

  • 52,500 ppm

  • 25,000 ppm

  • 10,000 ppm

  • 5,250 ppm

  • 2,500 ppm

  • Unsure


  1. My facility conducts studies with PV materials in: (select all that apply)

  • PVR transgenic mice

  • Non-human primates

  • Other animal model

  • We do not use animals with PV materials


  1. Standard PPE practices used in my facility for PV materials include: (select all that apply)

  • Safety glasses

  • Face shield

  • Double gloves

  • Face or surgical mask

  • Respirator/N95

  • Flat front gown

  • Coverall

  • Shoe covers/dedicated shoes

  • Clothing change

  • Showering out


  1. For PPE selected above, identify the manufacturer and product/catalog number.

Shape2

Text box – 100 words maximum




  1. I prefer alternative options rather than a mandatory exit shower (e.g., more PPE, add decon steps during doffing).

  • Strongly agree

  • Agree

  • Neither agree or disagree

  • Disagree

  • Strongly disagree


  1. For PV materials, my facility uses surgical/isolation gowns or coveralls meeting standards for:

  • Fluid resistance (e.g., level 1, 2, or 3)

  • Viral penetration resistance (e.g., level 4)

  • Testing standards are not currently considered for PPE

  • Unsure

  • Not applicable – gowns/coveralls are not worn


  1. For PV materials, my facility uses tape to seal/secure gloves to sleeves of PPE.

  • Yes

  • No


  1. For PV materials, my facility disinfects disposable PPE (e.g., gowns, coveralls) prior to reuse with:

  • Chlorine (e.g., bleach)

  • Alcohol (e.g., ethanol)

  • Oxidizing agents (e.g., Oxivir, Virkon-S)

  • Quaternary ammonium (e.g.,Roccal, Clorox or Lysol wipes)

  • Other

  • Unsure

  • We do not reuse disposable PPE


File Typeapplication/vnd.openxmlformats-officedocument.wordprocessingml.document
AuthorMandelbaum, Mark (CDC/DDPHSIS/CPR/DSAT)
File Modified0000-00-00
File Created2021-01-12

© 2024 OMB.report | Privacy Policy