5900-464 Rec Vehicle Catalytic Converter Checklist

	Catalyst Information 40 CFR §86.416-80(a)(2)(i), 40 CFR §86.420-78(b)(7), and/or 1051.230(b)(5) where applicable Note 1. For fields in which the catalyst information is not applicable or not available, please type “NA”. We may consider your application to be incomplete if appropriate information is not provided. Note 2. Production tolerances for the specifications below may be included at the applicant’s discretion.
	Engine Family Name: ________________________
	Catalyst Information (Catalyst on this form refers to the loaded substrate without casing)
Section 1		Catalytic Converter Catalyst 1	Catalytic Converter Catalyst 2	Catalytic Converter Catalyst 3
	Catalyst Manufacturer
	Part # shown on catalyst
	Part # shown on catalyst casing
	Vehicle Manufacturer Part #
	Catalyst Manufacturer Part #
	Catalytic/Active material (Pt, Pd, Rh, Ag, Ni, Ce, Zr, CoO, etc)
	Mass of Pt, Pd, Rh (grams)
	Ratio of Catalytic/Active material, in the order: Pt:Pd:Rh:Ag:Ni:Ce:Zr:CoO...
	Loading of Catalytic/Active material (g/L)
	Carrier/Washcoat Materials
	Catalyst Type (honeycomb, mesh, etc.)
	Catalyst Location (e.g., in muffler, etc.)
	Substrate Material (ceramic, metallic, etc.)
	Substrate Material (ceramic, metallic, etc.)
Section 2		Honeycomb Type
	Outside Container Diameter (mm)
	Outside Container Length (mm)
	Inside Substrate Diameter (mm)
	Inside Substrate Length (mm)
	Cell Density (specify units)
Section 3		Mesh Type
	Type of Mesh (grate, wire knit/woven brick,etc.)
	Outside of Container Length
	Outside of Container Width
	Outside of Container Depth
	Coated Brick Weight(g), if Wire Knit/Woven Brick
	Wire Diameter
	Aperture Size (if grate type)
Section 4		Other Type
	Type Description
	Catalytic/active Material Dimensions
	Container Dimensions
	Illustration of Relative Positions of Engine(s), Catalyst(s), Sensor(s), Muffler(s) and Exhaust(s)
	Manufacturer Notes to EPA
				Rev: Sep 29 2016
	Paperwork Reduction Act Notice
	The public reporting and recordkeeping burden for this collection of information is estimated to average 453.79 hours per respondent. Send comments on the Agency's need for this information, the accuracy of the provided burden estimates, and any suggested methods for minimizing respondent burden, including through the use of automated collection techniques to the Director, Collection Strategies Division, U.S. Environmental Protection Agency (2822T), 1200 Pennsylvania Ave., NW, Washington, D.C. 20460. Include the OMB control number 2060-0338 in any correspondence. Do not send the completed form to this address.