Farm Production Expenditures Methodology and Quality Measures

0218-Farm Production Expenditures Methodology and Quality Measures - Aug 3, 2017.pdf

Agricultural Resource Management, Chemical Use,Surveys - Substantive Change to MN Pest Survey

Farm Production Expenditures Methodology and Quality Measures

OMB: 0535-0218

Document [pdf]
Download: pdf | pdf
Farm Production Expenditures
Methodology and Quality Measures
ISSN: 2166-966X

Released August 3, 2017, by the National Agricultural Statistics Service (NASS), Agricultural Statistics Board, United States Department of
Agriculture (USDA).

Agricultural Resource Management Survey Methodology for Farm Production Expenditures
Scope and Purpose: Estimates of farm production expenditures are based on data collected in the Agricultural Resource
Management Survey (ARMS). The ARMS provides an annual snapshot of the financial health of the farm sector and farm
household finances. The ARMS is the only source of information available for objective evaluation of many critical
policy issues related to agriculture and the rural economy. In addition to obtaining farm production expenditures, the
ARMS also collects data on production practices and costs of production for one to three designated crop and livestock
commodities each year, selected on a rotational basis. The production practices and cost of production surveys for these
designated commodities are conducted in the top producing states while the farm production expenditures survey is
conducted in all states, except Alaska and Hawaii. The ARMS is cosponsored by the USDA’s Economic Research Service
(ERS).
The ARMS is conducted in three phases. The initial phase (ARMS I) screens a large sample of farms and ranches to
determine which farms qualify for subsequent phases of ARMS. Subsamples of qualifying farms are selected for the other
two phases. The second phase (ARMS II) collects data on agricultural production practices, chemical use, and costs of
production for each designated crop commodity. ERS is responsible for estimating the cost of production for major
commodities and determines the commodity rotation.
The third phase (ARMS III) collects whole farm finance and operator characteristics information for a calendar year.
Respondents from the second phase are included in the third phase to obtain financial and farm production expenditure
data for the entire operation. It is vital that both the ARMS II and ARMS III be completed for these designated crop
commodity operations. Data from both phases provide the link between agricultural resource use and farm financial
conditions, and allows for economic impact analysis of regulation and policy. This is a cornerstone of the ARMS design.
In addition, production practices, costs of production, and farm production-expenditure data for designated livestock
commodities are collected in one interview during the third phase (ARMS III).
Farm production expenditures are estimated for five regions, which include the fifteen leading cash receipt states and the
other states within each region to account for all states except Alaska and Hawaii. Farm production expenditures are also
estimated for eight economic sales classes and two farm type categories.
Survey Timeline: Data collection and analysis for the ARMS I are conducted from May through July. The ARMS II data
collection begins in September and runs through December. The ARMS III data collection begins in January and concludes
in April with further analysis and review continuing until the results are published in early August.
Sampling: The target population for the ARMS is all agricultural establishments with more than $1,000 in agricultural
sales (or potential sales). NASS uses a dual frame approach, consisting of list frame and area frame components, to
provide complete coverage of this target population.
NASS maintains a list of farm and ranch operators, known as the list frame. NASS is constantly seeking new operations
from outside list sources confirmed to be qualifying farms before being added to the list. A profile, known as control data,
of each operation is maintained which indicates what the farm has historically produced and a general indication of size.
This information allows NASS to define list-frame sampling populations that are specific to each survey and employ
advanced and more efficient sample designs.

Farm Production Expenditures Methodology and Quality Measures (August 2017)
USDA, National Agricultural Statistics Service

1

The ARMS list sample is selected based on a calculated Farm Value of Sales (FVS). All farms on the list frame with an
estimated FVS of $1,000 or more are eligible. The value of sales control data need not be exact as it is used to stratify
similar list operations into homogeneous groups.
NASS utilizes the Sequential Interval Poisson (SIP) sampling method to select the ARMS I sample. In a SIP sample
design, each operation is assigned a Permanent Random Number (PRN) between 0 and 1 from a uniform distribution. A
sample can be defined as all operations falling within a specified range of PRNs. This provides a mechanism to control
overlap across multiple surveys. In this case, SIP is used to minimize overlap between the previous year’s ARMS sample
and the current year Agricultural Survey sample, which is a large-scale quarterly acreage and grain stocks survey
program.
Calculating a probability of selection for each operation in the ARMS population is a complicated task. There are multiple
questionnaire versions in the ARMS III. Each designated commodity for the production practices versions requires a
separate sample. Beginning in 2004 there was an additional subsample that was used to increase the sample size of the 15
Core estimating states and reduce respondent burden with a condensed questionnaire. In 2012 this separate subsample
was dropped in favor of sending all operations except those selected for production practices a full CRR version.
For the two farm production expenditure subsamples, target samples sizes by Farm Value of Sales (FVS) strata determine
the probability of selection for each operation. For designated-commodity samples in the production practices versions,
probabilities of selection are computed based on probability proportional to size (PPS) using crop acres or livestock
inventory for the designated commodities.
The SIP sampling procedure is flexible and allows the use of different sample designs for each version in the ARMS III. It
also ensures that each operation is selected for one and only one version. Once the probabilities of selection are assigned,
the PRN determines which, if any, of the ARMS III versions will be assigned to that operation.
The area frame contains all land in the United States (except Alaska) and is therefore complete for the ARMS III program.
The land is stratified according to intensity of agriculture using satellite imagery. Land in each stratum is divided into
segments of roughly one square mile. Segments are optimally allocated and sampled to effectively measure crops and
livestock. Annually, NASS conducts the June Area Survey and conducts face-to-face interviews of every individual who
operates or owns land within a sampled area segment. All farms and ranches found operating in these segments are
checked to see if they are included in the list-frame ARMS III population. Farms and ranches that are not on the list frame
are sampled for the ARMS III so that the target population is completely represented.
The U.S. list-frame sample size for the ARMS III is approximately 36,000. The area-frame sample size is approximately
2,000. Each list-frame and area-frame sampling unit is assigned a sampling weight which is used to create the survey
estimates.
Data Collection: For consistency across modes, the paper version is considered the master questionnaire and the web and
Computer Assisted Telephone Interview (CATI) instruments are built to model the paper instrument. ERS plays a
significant role in the development of questionnaires. Questionnaire content and format are evaluated annually by NASS
and ERS through a specifications process, where requests for changes are evaluated and approved or disapproved. Input
may vary from question wording or formatting to a program change involving the deletion or modification of current
questions or addition of new ones. If significant changes to either the content or format are proposed, a NASS survey
methodologist will pre-test the changes for usability. Prior to the start of data collection, all modes of instruments are
reviewed and web and CATI instruments are thoroughly tested.
All federal data collections require approval by the Office of Management and Budget (OMB). NASS must document the
public need for the data, show the design applies sound statistical practice, ensure the data do not already exist elsewhere,
and show that the public is not excessively burdened. The ARMS questionnaires must display an active OMB number that
gives NASS the authority to conduct the survey, as well as a statement of the purpose of the survey and the use of the data
being collected. The questionnaires must include a response burden statement that gives an estimate of the time required
to complete the form, a confidentiality statement that the respondent’s information will be protected from disclosure, and

2

Farm Production Expenditures Methodology and Quality Measures (August 2017)
USDA, National Agricultural Statistics Service

a statement saying that response to the survey is voluntary and not required by law. For the ARMS, respondents must be
informed that their data will be shared with the cosponsor.
In addition to asking the specific economic and cost of production questions, all survey instruments collect information to
verify the sampled unit, determine any changes in the name or address, identify any partners to detect possible
duplication, verify the farm still qualifies for the target population, and identify any additional operations operated by the
sampled operator.
Sampled farms and ranches receive a presurvey postcard explaining the survey purpose and timeline and guaranteeing that
they will be contacted for survey purposes only. Mail, web, telephone and face-to-face interview modes of data collection
are utilized for the ARMS survey. The ARMS III utilizes multiple questionnaire versions. Prior to 2012, a Core version of
the questionnaire was used to obtain global farm level expense, income, and household data. This version was used for the
mail portion of the sample and for web-based data collection in the fifteen leading cash receipt states. The Costs and
Returns Report (CRR) asks for the same data as the Core questionnaire, but in greater detail and in all states. Prior to
2012, the CRR version was collected by face-to-face interviews only; beginning in 2012, the Costs and Returns Report
has been used for the mail and web-based portion of the sample in addition to face-to-face interviews. A separate ARMS
III production practices questionnaire version is developed for each of the designated commodity samples with additional
questions relating to the current year’s designated crop and livestock commodities. A reminder postcard is mailed to
sampled farms and ranches to request the return of a completed questionnaire. The postcard also thanks respondents if
they have already returned their questionnaire.
Survey Edit: As survey data are collected and captured, they are edited for consistency and reasonableness using
automated systems. Reported data are typically first edited as a “batch” of data when first captured. The edit logic ensures
administrative coding follows the methodological rules associated with the survey design. Relationships between data
items on the current survey are verified and, in certain situations, items are compared to data from earlier surveys to make
sure certain relationships are logical. The edit determines the status of each record to be either “dirty” or “clean”. Dirty
records must be either updated or certified by an analyst to be accurate. Corrected data are reedited interactively. Only
clean records are eligible for analysis tools and summary.
Analysis Tool: Edited economic and cost of production data are processed through an interactive analysis tool that
displays data for all reports by questionnaire item. The tool provides various scatter plots, tables, charts, and special
tabulations that allow the analyst to compare an individual record to other similar records within their state. These tools
make outliers and unusual data relationships evident and Field Office and Headquarters staff review them to determine if
they are correct. Suspect data found to be in error are corrected, while data found to be correct are kept.
Nonsampling Errors: Nonsampling errors are present in any survey process. These errors include reporting, recording,
editing, and imputation errors. Steps are taken to minimize the impact of these errors, such as questionnaire testing,
comprehensive interviewer training, validation and verification of processing systems, detailed computer edits, and the
analysis tool.
Nonresponse Adjustment: Response to the ARMS III is voluntary. Some producers refuse to participate in the survey,
others cannot be located during the data collection period, and some submit incomplete reports. These nonrespondents
must be accounted for if accurate estimates of total farm expenditures are to be made. For this survey, item level
nonresponse is accounted for by imputing data where there are missing values. Beginning in 2014, item level imputations
are now done using a multivariate approach. Prior to the implementation of the multivariate approach, NASS used an unweighted conditional means imputation system that placed records into homogenous groups and imputed based off of
reported data from those groups. The new multivariate approach uses a regression-based technique that allows for
flexibility in the selection of conditional models while providing a valid joint distribution. In this procedure, labeled as
iterative sequential regression (ISR), parameter estimates and imputations are obtained using a Markov chain Monte Carlo
sampling method. Using ISR, we are better able to preserve the relationships within the data and also allow the imputed
values to better represent the variability of the data. Records with imputed data are re-edited to ensure the returned value
is acceptable. The imputation algorithm fails to deliver an acceptable value less than one-half of one percent of the time
and Field Office statisticians are required to manually impute for those items.

Farm Production Expenditures Methodology and Quality Measures (August 2017)
USDA, National Agricultural Statistics Service

3

Calibration: Calibration is a weighting technique used in survey sampling to adjust the survey weights for sampled
elements so that the weighted sum of a set of benchmark variables equals a pre-determined set of values for the
population. The input to the calibration algorithm used for ARMS III is the weights generated from the sampling
procedures. Sampling weights are calculated based on numerous factors so that the sample allocation can be
representative of the entire population of farms at the state level for the fifteen leading cash receipts states and at the
regional level for all other states. Due to survey nonresponse and the possibility of disproportionate responses across
different farm types and economic sales classes, weights are adjusted through a calibration algorithm. Calibration adjusts
the sampling weights so that the expanded data will match several known commodity, livestock, and farm number
published totals. This ensures that the expense data collected will accurately represent the expense breakdowns for all
farm types and farm sizes as well as cover the expenses for the entire target population.
Estimators: The ARMS III utilizes direct expansions for all survey indications. For both the list and area frame
respondents, direct expansions are calculated by summing the reported or imputed economic and expenditure values
weighted by the calibration weights. Variance estimates are computed for all expansions. The dual frame direct expansion
and variance are the sum of the estimates from the list frame and the portion of the area frame that contains operations not
included on our list frame population for the ARMS III.
Outliers: NASS conducts a formal review of outliers found in the expanded data. Outliers may be caused by aging
control data resulting in misstratification, data errors, or the nonresponse and calibration adjustments to the sampling
weight. A preliminary calibration and summary are run and any individual record accounting for 0.5 percent of the
national expansion for total expenses or 2.5 percent of a regional expansion for total expenses is tagged as an outlier.
After verifying the data have not been misrecorded or mishandled, background information on these outliers is compiled
and presented to a National Outlier Board. This Board is a team of NASS and ERS analysts that meets to discuss the
national outliers and form a consensus on a course of action. Most outliers trace back to unique situations that do not exist
in the target population as often as a large calibrated sample weight indicates. The Board looks at other reports of the
same type and sales class as the reported data on the outlier. The Board examines the weights of the comparable reports
and most often overrides the outlier’s weight with the median weight of the comparable reports. After the extreme outliers
have been addressed, the Board reviews the national totals by expense category following the same methodology and,
when necessary, overrides the outlier’s weight with the median weight of the comparable reports. Finally, Headquarters
staff examines outliers found at the state level for the published expense categories. A determination is made as to
whether a weight adjustment is justified. Adjustments are not made to all outliers, but they are reviewed closely for
accuracy. Once all adjustments are made, the calibration program is executed again to create the final set of weights for
summary purposes.
Estimation: When all samples are accounted for, all responses fully edited, and the analysis material is reviewed,
Headquarters staff executes a summary that generates state level totals for the fifteen leading cash receipt states and
regional totals for the remaining states. Since all states conduct identical surveys, the samples can be pooled and national
survey results computed. The summary results provide point estimates and their standard errors for each estimated data
series. It also provides information used to assess the performance of the current survey and evaluate the quality of the
survey estimates, such as expansions by farm types and economic sales classes, response rates, and the effectiveness of
calibration.
The ARMS III supports the annual estimates of total farm expenditures and the total expenses related to the following
categories: Livestock, Feed, Farm Services, Rent, Agricultural Chemicals, Fertilizer, Interest, Taxes, Labor, Fuels, Farm
Supplies and Repairs, Farm Improvements and Construction, Tractors and Self-Propelled Farm Machinery, Other Farm
Machinery, Seeds, Trucks and Autos, and Miscellaneous Capital Expenses.
Field Offices are responsible for performing a detailed review and providing comments that justify survey results. Any
irregularities revealed by the summary must be investigated and, if necessary, resolved. Field Offices see their state’s
survey results only and do not have access to other states’ results.
For the national estimates, NASS assembles another joint panel of NASS and ERS analysts to serve as the Agricultural
Statistics Board, which reviews the national level survey results and establishes the national estimates. Since larger
sample sizes yield more precise results, NASS employs the “top-down” approach by determining the national estimates
4

Farm Production Expenditures Methodology and Quality Measures (August 2017)
USDA, National Agricultural Statistics Service

first and then reconciling the region and state estimates to the national number for all estimates. The Board has the
advantage of being able to examine results across states, review the state comments and justifications, and utilize external
administrative data available only at the U.S. level to corroborate survey results. The same estimators used in the state
summaries are utilized by the national summary. Upon Board consensus, national level summary indications are adopted
as official national estimates except in cases where strong justification supports deviating from survey totals. In a separate
process, a team of Field Office and Headquarters staff must reexamine the region and state results and adjust state
estimates to sum to the national estimate. This process occurs both when indications are adopted as official estimates and
when estimates deviate from survey totals.
Estimates are open to revision on a predetermined schedule only if new information becomes available. In general,
revisions to the expenditure estimates may be considered one year later if there were revisions made to any of the
calibration targets or other information became available that significantly impacts the previous year estimates. External
information (administrative data) is also utilized in this process. In order to be considered, these data must be deemed to
be reliable and come from unbiased sources. Census of Agriculture farm production expenditure estimates are available
every five years and are used to assess the accuracy of the ARMS III results.

Farm Production Expenditures Methodology and Quality Measures (August 2017)
USDA, National Agricultural Statistics Service

5

Quality Metrics for Farm Production Expenditures
Purpose and Definitions: Under the guidance of the Statistical Policy Office of the Office of Management and Budget
(OMB), the United States Department of Agriculture’s National Agricultural Statistics Service (NASS) provides data
users with quality metrics for its published data series. The metrics tables below describe the performance data for the
survey contributing to the publication. The accuracy of data products may be evaluated through sampling and
nonsampling error. The measurement of error due to sampling in the current period is evaluated by the coefficient of
variation for each estimated item. Non-sampling error is evaluated by response rates and the percent of the estimate from
respondents.
Sample size is the number of observations selected from the population to represent a characteristic of the
population. Operations that did not have the item of interest or were out of business at the time of data collection
have been excluded.
Response rate is the proportion of the sample that completed the survey. This calculation follows Guideline 3.2.2 of
the Office of Management and Budget Standards and Guidelines for Statistical Surveys (Sept 2006).
Coefficient of variation provides a measure of the size for the standard error relative to the point estimate. It is used
to measure the precision of the results of a survey estimator.
Percent of estimate from respondents is a ratio of survey data expanded by the sampling weight compared to
survey data expanded by the calibrated weight that adjusts for survey nonresponse and other non-sampling errors. In
other words, it is the percent of the estimate represented by the actual survey respondents.

Farm Production Expenditures Sample Size and Response Rates – United States: 2015 and 2016
State and region

Sample size

Response rate

2015

2016

2015

2016

(number)

(number)

(percent)

(percent)

Atlantic ............................................................
North Carolina .................................................
Other States ....................................................

4,145
1,557
2,588

4,539
1,347
3,192

53.7
61.0
49.3

58.0
61.8
56.3

South ...............................................................
Arkansas .........................................................
Florida .............................................................
Georgia ...........................................................
Other States ....................................................

6,345
1,529
1,750
1,796
1,270

5,494
1,335
1,728
1,484
947

52.5
62.9
37.4
48.8
65.8

56.2
68.0
44.0
49.7
72.2

Midwest ...........................................................
Illinois ..............................................................
Indiana ............................................................
Iowa ................................................................
Minnesota .......................................................
Missouri ..........................................................
Wisconsin .......................................................
Other States ....................................................

12,863
1,896
2,013
2,113
1,937
1,800
1,600
1,504

10,957
1,637
1,653
1,589
1,588
1,560
1,674
1,256

55.1
52.6
46.3
57.9
63.0
50.5
61.8
53.9

57.5
54.1
52.3
65.2
65.7
54.4
57.2
52.4

Plains ...............................................................
Kansas ............................................................
Nebraska ........................................................
Texas ..............................................................
Other States ....................................................

8,830
2,361
2,179
2,706
1,584

6,860
1,742
1,620
2,409
1,089

46.2
41.8
41.7
55.8
42.7

48.9
45.0
47.7
53.8
46.4

West .................................................................
California .........................................................
Washington .....................................................
Other States ....................................................

5,974
2,285
1,828
1,861

6,030
2,394
1,776
1,860

48.7
52.5
45.8
47.0

52.4
53.9
52.9
50.2

United States ......................................................

38,157

33,880

51.4

54.7

6

Farm Production Expenditures Methodology and Quality Measures (August 2017)
USDA, National Agricultural Statistics Service

Quality Metrics for Farm Production Expenditures – Region, Selected States, Farm Type, and
Economic Class: 2015 and 2016
Total

Coefficient of variation
2015

Percent of estimate from respondents

2016

(percent)

2015

(percent)

2016

(percent)

(percent)

Total farm production expenditures ..................................
Livestock, poultry and related expenses ..........................
Feed ................................................................................
Farm services ..................................................................
Rent .................................................................................
Agricultural chemicals ......................................................
Fertilizer, lime and soil conditioners .................................
Interest ............................................................................
Taxes (real estate and property) ......................................
Labor ...............................................................................

4.5
8.2
4.0
4.4
7.2
7.2
9.1
8.9
3.9
4.6

1.8
5.5
3.1
2.2
2.2
2.6
2.3
2.7
1.6
4.4

45.1
41.4
45.9
45.6
43.1
42.7
44.0
47.4
48.5
43.4

49.4
50.9
48.3
50.1
47.2
47.4
47.5
50.1
52.9
44.4

Fuels ...............................................................................
Farm supplies and repairs ...............................................
Farm improvements and construction ..............................
Tractors and self-propelled farm machinery .....................
Other farm machinery ......................................................
Seeds and plants .............................................................
Trucks and autos .............................................................
Miscellaneous capital expenses .......................................

5.6
6.8
8.0
8.9
9.3
9.0
10.7
13.3

2.2
2.5
4.7
4.5
3.9
2.7
5.3
7.7

46.3
45.8
50.6
50.7
45.4
43.6
52.9
57.8

50.4
49.8
60.3
53.7
49.8
47.0
62.6
70.6

Atlantic .........................................................................
North Carolina .............................................................
Other States ................................................................

5.6
3.2
7.3

6.1
5.1
8.0

46.2
48.7
45.4

56.6
60.1
55.5

South ............................................................................
Arkansas .....................................................................
Florida .........................................................................
Georgia ........................................................................
Other States ................................................................

4.0
2.3
8.1
4.2
8.9

3.1
3.2
8.2
2.9
6.6

48.8
57.5
32.2
41.7
53.8

66.0
79.7
46.5
46.3
76.0

Midwest ........................................................................
Illinois ..........................................................................
Indiana .........................................................................
Iowa .............................................................................
Minnesota ....................................................................
Missouri .......................................................................
Wisconsin ....................................................................
Other States ................................................................

1.3
2.5
2.1
2.1
1.7
3.6
3.7
6.0

2.2
2.1
2.2
4.5
2.4
4.5
5.3
10.3

48.7
46.4
43.6
50.1
52.6
45.1
48.9
50.0

48.3
49.6
43.0
48.6
49.7
60.6
48.5
41.4

Plains ............................................................................
Kansas ........................................................................
Nebraska .....................................................................
Texas ...........................................................................
Other States ................................................................

16.9
15.5
6.2
11.9
57.7

3.8
12.2
6.0
3.1
8.4

40.8
37.8
32.9
49.0
42.4

44.1
50.4
40.3
50.0
38.0

West ..............................................................................
California .....................................................................
Washington ..................................................................
Other States ................................................................

4.5
5.1
8.6
8.8

4.9
4.9
7.1
10.2

42.5
40.8
46.4
43.3

45.3
46.3
46.3
43.8

6.8
3.9

2.2
2.7

43.7
46.4

47.3
51.7

5.2
4.9
6.5
4.8
12.1
12.5
5.7
7.3

4.1
6.0
7.4
4.0
3.4
2.8
3.0
5.7

59.0
70.7
44.8
54.9
48.5
40.6
39.8
43.4

71.7
82.9
51.1
60.0
52.7
42.5
45.6
44.1

Regional - total farm production expenditure

Farm type - total farm production expenditure
Crop ............................................................................
Livestock .....................................................................
Economic class - total farm production expenditure
Less than $10,000 .......................................................
$10,000-$49,999 ..........................................................
$50,000-$99,999 ..........................................................
$100,000-$249,999 ......................................................
$250,000-$499,999 ......................................................
$500,000-$999,999 ......................................................
$1,000,000-$4,999,999 ................................................
$5,000,000 and over ....................................................

Farm Production Expenditures Methodology and Quality Measures (August 2017)
USDA, National Agricultural Statistics Service

7

Information Contacts
Listed below are the commodity statisticians in the Environmental, Economics, and Demographics Branch of the National
Agricultural Statistics Service to contact for additional information. E-mail inquiries may be sent to [email protected].
Jody McDaniel, Chief, Environmental, Economics, and Demographics Branch............................................. (202) 720-6146
Tony Dorn, Head, Economics Section ............................................................................................................. (202) 690-3223
Rachel Antzak – Cash Receipts, Land Values ........................................................................................... (202) 720-5446
Daryl Brinkman – Prices Received, Prices Received Indexes, Parity Prices ............................................ (202) 720-8844
Liana Cuffman – Prices, Prices Research, Prices Received Indexes, Parity Prices ................................... (202) 690-3229
Kuan Chen – Prices, Prices Research ........................................................................................................ (202) 690-3347
Stephen Habets – Farm Production Expenditures ..................................................................................... (202) 720-9168
Joe Hagedorn – Cash Rents, Grazing Fees ................................................................................................ (202) 690-3231
Benjamin Johnson – Data Analysis and Estimation Process ..................................................................... (202) 690-3225
Michael Mathison – Farm Production Expenditures ................................................................................. (202) 720-3243

Scott Shimmin, Head, Environmental and Demographics Section .................................................................. (202) 720-0684
Stephanie Brennan – Field Crops Chemical Use ...................................................................................... (202) 690-0392
Natasha Bruton – Current Agricultural Industrial Reports ........................................................................ (202) 720-7644
Ryan Cowen – Farms, Land in Farms, Census .......................................................................................... (202) 690-3233
Doug Farmer – Organics, Vegetable Chemical Use .................................................................................. (202) 720-7492
Ginger Harris – Census of Agriculture ...................................................................................................... (502) 907-3211
Courtney Charles – Current Agricultural Industrial Reports ..................................................................... (202) 690-3226
Dominique Sims – Local Foods, Census ................................................................................................... (202) 720-5581
Theresa Varner – Farm Labor, Chemical Use ........................................................................................... (202) 690-2284

8

Farm Production Expenditures Methodology and Quality Measures (August 2017)
USDA, National Agricultural Statistics Service

Access to NASS Reports
For your convenience, you may access NASS reports and products the following ways:
 All reports are available electronically, at no cost, on the NASS web site: www.nass.usda.gov
 Both national and state specific reports are available via a free e-mail subscription. To set-up this free
subscription, visit www.nass.usda.gov and click on “National” or “State” in upper right corner above “search”
box to create an account and select the reports you would like to receive.
For more information on NASS surveys and reports, call the NASS Agricultural Statistics Hotline at (800) 727-9540,
7:30 a.m. to 4:00 p.m. ET, or e-mail: [email protected].

The U.S. Department of Agriculture (USDA) prohibits discrimination against its customers, employees, and applicants for
employment on the basis of race, color, national origin, age, disability, sex, gender identity, religion, reprisal, and where
applicable, political beliefs, marital status, familial or parental status, sexual orientation, or all or part of an individual's
income is derived from any public assistance program, or protected genetic information in employment or in any program
or activity conducted or funded by the Department. (Not all prohibited bases will apply to all programs and/or
employment activities.)
If you wish to file a Civil Rights program complaint of discrimination, complete the USDA Program Discrimination
Complaint Form (PDF), found online at http://www.ascr.usda.gov/complaint_filing_cust.html, or at any USDA office, or
call (866) 632-9992 to request the form. You may also write a letter containing all of the information requested in the
form. Send your completed complaint form or letter to us by mail at U.S. Department of Agriculture, Director, Office of
Adjudication, 1400 Independence Avenue, S.W., Washington, D.C. 20250-9410, by fax (202) 690-7442 or email at
[email protected].


File Typeapplication/pdf
File TitleFarm Production Expenditures Methodology and Quality Measures 08/03/2017
AuthorUSDA, National Agricultural Statistics Service
File Modified2017-07-31
File Created2017-07-31

© 2024 OMB.report | Privacy Policy