Foreign Fishing Vessel Permit Application Package

Foreign Fishing Vessel Permits, Vessel, and Gear Identification, and Reporting Requirements

0075 permit app instructions package

Information packet for vesel ID form and 3 permit types: directed, joint venture and transshipment

OMB: 0648-0075

Document [docx]
Download: docx | pdf

OMB Control No. 0648-0075

Expiration Date: X/XX/20XX


GENERAL INSTRUCTIONS FOR FOREIGN FISHING APPLICATIONS REQUESTING PERMITS TO BE ISSUED UNDER SECTION 204 OF THE MAGNUSON-STEVENS FISHERY CONSERVATION AND MANAGEMENT ACT


Requests for permits to be issued under Section 204(b) of the Magnuson-Stevens Fishery Conservation and Management Act (MSFCMA) must be submitted by an authorized representative of a foreign nation having a Governing International Fishery Agreement with

the United States. Representatives of applicant foreign fishing nations must complete Vessel Identification Forms (VIFs), as appropriate, complete and sign the basic application form for vessel permits to be issued under Section 204(b), and answer the supplemental questions on joint venture operations. This

material must be submitted to the Department of State's Bureau of Oceans and International Environmental and Scientific Affairs,

Office of Marine Conservation, Washington, D.C. 20520 (Phone

(202) 647-3940, Fax (202) 736-7350). At the time the application material is submitted to the Department of State, an application fee of $817.00 per vessel must be submitted to the Department of Commerce's National Marine Fisheries Service, Office of International Affairs, 1315 East West Highway, Silver Spring, Maryland 20910 (Phone (301) 427-8365, Fax (301) 713-2313).

Checks must be drawn on U.S. banks and made payable to

"Department of Commerce - NOAA." Processing of applications does not begin until application fees are paid.


Requests for permits to be issued under Section 204(d) of the MSFCMA may be submitted by any person. Applicants must complete VIFs, as appropriate, together with a cover letter describing the nature of the transshipments to be conducted and confirming that the applicant will comply with the requirements of Section 201(c)(2) of the MSFCMA with respect to activities authorized by any permit issued pursuant to the application. This material, together with an application fee of $817.00 per vessel, must be submitted to the Department of Commerce's National Marine Fisheries Service, Office of International Affairs, 1315 East

West Highway, Silver Spring, Maryland 20910 (Phone (301) 427-8350,

Fax (301) 713-2313). Checks must be drawn on U.S. banks and made payable to "Department of Commerce - NOAA." Processing

of applications does not begin until application fees are paid.

***

Submission of application information is mandatory in order to be considered for a permit and is used in determining if a permit should be issued. Except for any price information considered and identified as confidential by applicants, application information is not confidential.


A Federal agency may not conduct or sponsor, and a person is not required to respond to, nor shall a person be subject to a penalty for failure to comply with an information collection subject to the requirements of the Paperwork Reduction Act of 1995 unless the information collection has a currently valid OMB Control Number. The approved OMB Control Number for this information collection is 0648-0075. Without this approval, we could not conduct this information collection. Public reporting for this information collection is estimated to be approximately slightly over 2 hours for joint venture applications, 1.5 hours for fishing applications, and 0.75 hours for transshipment applicationsincluding the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the information collection. All responses to this information collection are required to obtain benefits. Send comments regarding this burden estimate or any other aspect of this information collection, including suggestions for reducing this burden to the Office of International Affairs (F/IA), National Marine Fisheries Service, 1315 East West Highway, Silver Spring, Maryland 20910.


























OMB Control No. 0648-0075

Expiration Date: X/XX/20XX



INSTRUCTIONS FOR COMPLETING FISHING VESSEL IDENTIFICATION FORMS (VIF's) FOR FOREIGN FISHING PERMITS TO BE

ISSUED UNDER THE MAGNUSON-STEVENS FISHERY CONSERVATION AND MANAGEMENT ACT (MSFCMA)


Complete a VIF form for each vessel for which a permit is requested. Please read the instructions carefully before beginning to enter information. VIFs for permits to be issued under Section 204(b) of the MSFCMA (e.g., joint venture permits) should be submitted together with other appropriate application material to the Department of State. VIFs for permits to be issued under Section 204(d) of the MSFCMA (i.e., transshipment permits) should be submitted together with other appropriate application material to the Department of Commerce. Timely submissions of completed applications will ensure prompt consideration of requests.


Type the form in English. Complete all appropriate items, except the space near the top, right-hand corner labeled "NO:."


  1. Vessel Name: Enter the name of the vessel. Where

necessary, transliterate into Roman characters. Do not translate the name into English.


  1. Call Sign: Enter the vessel identifying markings permanently affixed to the vessel as required by the foreign fishing regulations, normally the international radio call sign.


  1. Hull Number: Enter the hull number or other alpha-numeric mark on the vessel.


  1. Vessel Type: Enter one of the following vessel types:

Stern Trawler/Processor Factory Ship

(small: 0 - 289 GRT) Refrigerated Transport (medium: 290 - 1,399 GRT) Cargo Transport

(large: 1,400 plus GRT) Tanker

If other than one of the above, identify and describe the type.

  1. Length: Enter the vessel's overall length to the nearest meter.


  1. Gross Tons: Enter the gross registered tonnage, rounded to the nearest metric ton.


  1. Net Tons: Enter the net registered tonnage, rounded to the nearest metric ton.


  1. Maximum Speed: Enter the vessel's maximum speed in nautical miles per hour.


  1. Owner Name and Address: Enter the names and mailing addresses of all owners of the vessel. If there is more than one owner, enter the first name and address on the form and the other names and addresses on attached pages. "Owner" includes any person, company, or government agency that own(s) the vessels;

any charterer, whether bare boat, time, or voyage; and any person or company that acts in the capacity of a charterer, including, but not limited to, parties to a management agreement, operating agreement, or any similar agreement that bestows control over the destination, function, or operation of the vessel.


  1. Agent Name and Address: Enter the name and address of the person in the United States that will act as agent for the vessel in accordance with the requirement at Section 201(c)(2)(F) of the MSFCMA.


  1. Processing Equipment: List any fish processing equipment aboard the vessel such as fillet lines, freezers, surimi plant, fish meal/oil plant, etc.


  1. Hold Capacity: Enter in cubic meters the hold capacity for each hold or other space (including flash freezers) in which fish or fish products may be stored. Use bale capacity only. If there are more than four (4) holds, give the total hold capacity in cubic meters. Otherwise, list the holds individually. Record this information accurately; the information is used by NMFS enforcement and U.S. Coast Guard personnel to determine the quantity of fish or fish products aboard the vessel.


  1. Indicate if the vessel has fished in the EEZ in prior years by listing the last permit application number. If the vessel has never applied for a permit, indicate "none" in the space provided.

  2. If joint venture activities are requested, place an "X" after "YES" and attach the required supplemental information (see supplemental questions on joint ventures).


  1. Indicate if the vessel is certified to be in compliance with the flag nation's health and safety standards by placing an "X" in the space provided.


  1. Fisheries for Which a Permit is Requested:

Fishery: If the vessel is applying for a permit to be issued under Section 204(b) of the MSFCMA (e.g., a joint venture permit), enter the three letter code from the following list for each fishery for which an application is made:


NWA - Northwest Atlantic Ocean


Requested Species: If the vessel is applying for a permit to be issued under Section 204(b) of the MSFCMA, list the species requested for joint ventures.


Gear: Leave blank. Catch: Leave blank. Process: Leave blank.

Activity - Other: If the vessel is applying for a permit to be issued under Section 204(b) of the MSFCMA, using the Activity Codes listed in Attachment 1, designate the activities requested in each fishery using the format shown in Attachment 2.


  1. If the vessel is applying for a permit to be issued under Section 204(d) of the MSFCMA, enter the latitude and longitude of the transshipment point requested.


  1. If the vessel is applying for a permit to be issued under Section 204(d) of the MSFCMA, indicate whether the transshipment point requested above is in the internal or territorial waters of a State and identify the State.

OMB Control NO. 0648-0075

EXPIRATION DATE: X/XX/20XX


FISHING VESSEL IDENTIFICATION FORM (VIF)


NO:


(1) VESSEL NAME: (2) CALL SIGN:

(3) HULL NO: (4) VESSEL TYPE:

(5) LENGTH (METERS): (6) GROSS TONS:

(7) NET TONS: (8) MAX SPEED (KNOTS):

  1. OWNER NAME:

ADDRESS:


  1. AGENT NAME:

ADDRESS:

  1. PROCESSING EQUIPMENT:

  2. HOLD CAPACITY (IN CUBIC METERS - BALE CAPACITY ONLY):

HOLD #1: HOLD #2: HOLD #3: HOLD #4: (IF MORE THAN 4 HOLDS, GIVE TOTAL HOLD CAPACITY)

  1. LIST LAST APPLICATION NUMBER IF NONE, CHECK

  2. Shape1 Shape2 ARE JOINT VENTURE OPERATIONS BEING REQUESTED? YES NO (IF YES, ATTACH JOINT VENTURE SUPPLEMENTAL RESPONSES)


  1. CHECK IF VESSEL IS CERTIFIED TO BE IN COMPLIANCE WITH THE FLAG NATION'S HEALTH AND SAFETY STANDARDS


  1. Shape3


    A C T I V I T Y

    FISHERY

    SPECIES/TRANSHP. LOCATION

    GEAR

    CATCH

    PROCESS

    OTHER








    FISHERY FOR WHICH PERMIT IS REQUESTED:










  1. TRANSSHIPMENT POINT (LATITUDE AND LONGITUDE)


  1. Shape4 Shape5 Shape6 IS TRANSSHIPMENT POINT WITHIN THE INTERNAL OR TERRITORIAL WATERS OF A STATE? YES NO IF YES, IDENTIFY STATE


File Typeapplication/vnd.openxmlformats-officedocument.wordprocessingml.document
AuthorSarah Brabson
File Modified0000-00-00
File Created2021-01-13

© 2024 OMB.report | Privacy Policy