30-day FRN (1219-0116) published

30-day FRN (1219-0116) published.pdf

Examinations and Testing of Electrical Equipment, Including Examination, Testing, and Maintenance of High Voltage Longwalls

30-day FRN (1219-0116) published

OMB: 1219-0116

Document [pdf]
Download: pdf | pdf
Federal Register / Vol. 85, No. 216 / Friday, November 6, 2020 / Notices
notice to www.reginfo.gov/public/do/
PRAMain. Find this particular
information collection by selecting
‘‘Currently under 30-day Review—Open
for Public Comments’’ or by using the
search function.
Comments are invited on: (1) Whether
the collection of information is
necessary for the proper performance of
the functions of the Department,
including whether the information will
have practical utility; (2) if the
information will be processed and used
in a timely manner; (3) the accuracy of
the agency’s estimates of the burden and
cost of the collection of information,
including the validity of the
methodology and assumptions used; (4)
ways to enhance the quality, utility and
clarity of the information collection; and
(5) ways to minimize the burden of the
collection of information on those who
are to respond, including the use of
automated collection techniques or
other forms of information technology.
FOR FURTHER INFORMATION CONTACT:

Anthony May by telephone at 202–693–
4129 (this is not a toll-free number) or
by email at [email protected].
Section
103(h) of the Federal Mine Safety and
Health Act of 1977 (Mine Act) (30
U.S.C. 813(h)), authorizes MSHA to
collect information necessary to carry
out its duty in protecting the safety and
health of miners. Further, section 101
(a) of the Mine Act (30 U.S.C. 811)
authorizes the Secretary of Labor to
develop, promulgate, and revise as may
be appropriate, improved mandatory
health or safety standards for the
protection of life and prevention of
injuries in coal or other mines. Title 30
of the Code of Federal Regulations (CFR)
section 57.11053 requires the
development of specific escape and
evacuation plans that address the
unique conditions of each underground
metal and nonmetal mine. Section
57.11053 also requires that mine
operators make revisions to the escape
and evacuation plan for an underground
metal and nonmetal mine as mining
progresses. The plan must be available
to representatives of MSHA and
conspicuously posted at the mine at
locations convenient to all persons on
the surface and underground. The mine
operator and MSHA are required to
jointly review the plan at least once
every 6 months. The following
information is required with each
escape and evacuation plan submission:
• Mine maps or diagrams showing
directions of principal air flow, location
of escape routes, and locations of
existing telephones, primary fans,

SUPPLEMENTARY INFORMATION:

VerDate Sep<11>2014

19:00 Nov 05, 2020

Jkt 253001

primary fan controls, fire doors,
ventilation doors, and refuge chambers;
• Procedures to show how the miners
will be notified of an emergency;
• An escape plan for each working
area in the mine, including instructions
showing how each working area should
be evacuated;
• A firefighting plan;
• Procedures for surface personnel to
follow in an emergency, including the
notification of proper authorities and
the preparation of rescue equipment and
other equipment which may be used in
rescue and recovery operations; and
• A statement of the availability of
emergency communication and
transportation facilities, emergency
power, and ventilation, and the location
of rescue personnel and equipment.
For additional substantive
information about this ICR, see the
related notice published in the Federal
Register on June 17, 2020 (85 FR 36619).
This information collection is subject
to the PRA. A Federal agency generally
cannot conduct or sponsor a collection
of information, and the public is
generally not required to respond to an
information collection, unless the OMB
approves it and displays a currently
valid OMB Control Number. In addition,
notwithstanding any other provisions of
law, no person shall generally be subject
to penalty for failing to comply with a
collection of information that does not
display a valid OMB Control Number.
See 5 CFR 1320.5(a) and 1320.6.
DOL seeks PRA authorization for this
information collection for three (3)
years. OMB authorization for an ICR
cannot be for more than three (3) years
without renewal. The DOL notes that
information collection requirements
submitted to the OMB for existing ICRs
receive a month-to-month extension
while they undergo review.
Agency: DOL–MSHA.
Title of Collection: Escape and
Evacuation Plans.
OMB Control Number: 1219–0046.
Affected Public: Individuals and
households.
Total Estimated Number of
Respondents: 193.
Total Estimated Number of
Responses: 386.
Total Estimated Annual Time Burden:
3,281 hours.
Total Estimated Annual Other Costs
Burden: $1,930.
(Authority: 44 U.S.C. 3507(a)(1)(D))
Dated: November 2, 2020.
Anthony May,
Management and Program Analyst.
[FR Doc. 2020–24653 Filed 11–5–20; 8:45 am]
BILLING CODE 4510–43–P

PO 00000

Frm 00057

Fmt 4703

Sfmt 4703

71103

DEPARTMENT OF LABOR
Office of the Secretary
Agency Information Collection
Activities; Submission for OMB
Review; Comment Request;
Examinations and Testing of Electrical
Equipment, Including Examination,
Testing, and Maintenance of High
Voltage Longwalls
Notice of availability; request
for comments.

ACTION:

SUMMARY: The Department of Labor
(DOL) is submitting this Mining Safety
and Health Administration (MSHA)sponsored information collection
request (ICR) to the Office of
Management and Budget (OMB) for
review and approval in accordance with
the Paperwork Reduction Act of 1995
(PRA). Public comments on the ICR are
invited.
DATES: The OMB will consider all
written comments that agency receives
on or before December 7, 2020.
ADDRESSES: Written comments and
recommendations for the proposed
information collection should be sent
within 30 days of publication of this
notice to www.reginfo.gov/public/do/
PRAMain. Find this particular
information collection by selecting
‘‘Currently under 30-day Review—Open
for Public Comments’’ or by using the
search function.
Comments are invited on: (1) Whether
the collection of information is
necessary for the proper performance of
the functions of the Department,
including whether the information will
have practical utility; (2) if the
information will be processed and used
in a timely manner; (3) the accuracy of
the agency’s estimates of the burden and
cost of the collection of information,
including the validity of the
methodology and assumptions used; (4)
ways to enhance the quality, utility and
clarity of the information collection; and
(5) ways to minimize the burden of the
collection of information on those who
are to respond, including the use of
automated collection techniques or
other forms of information technology.
FOR FURTHER INFORMATION CONTACT:
Anthony May by telephone at 202–693–
4129 (this is not a toll-free number) or
by email at [email protected].
SUPPLEMENTARY INFORMATION: Section
103(h) of the Federal Mine Safety and
Health Act of 1977 (Mine Act), 30 U.S.C.
813(h), authorizes MSHA to collect
information necessary to carry out its
duty in protecting the safety and health
of miners. Further, section 101(a) of the
Mine Act, 30 U.S.C. 811, authorizes the

E:\FR\FM\06NON1.SGM

06NON1

71104

Federal Register / Vol. 85, No. 216 / Friday, November 6, 2020 / Notices

Secretary of Labor (Secretary) to
develop, promulgate, and revise as may
be appropriate, improved mandatory
health or safety standards for the
protection of life and prevention of
injuries in coal or other mines. The
Mine Act and 30 CFR parts 75 and 77,
mandatory safety standards for coal
mines, make this collection of
information necessary. Inadequate
maintenance of electric equipment is a
major cause of serious electrical
accidents in the coal mining industry. It
is imperative that mine operators adopt
and follow an effective maintenance
program to ensure that electric
equipment is maintained in a safe
operating condition to prevent
electrocutions, mine fires, and mine
explosions. MSHA regulations require
the mine operator to establish an
electrical maintenance program by
specifying minimum requirements for
the examination, testing, and
maintenance of electric equipment. The
regulations also contain recordkeeping
requirements that help operators in
implementing an effective maintenance
program. (a) Examinations of Electric
Equipment (1) Section 75.512 requires
that all electric equipment be frequently
examined, tested, and maintained by a
qualified person to assure safe operating
conditions and that a record of such
examinations be kept. Section 75.512–2
specifies that required examinations and
tests be made at least weekly. (2)
Section 75.703–3(d)(11) requires that all
grounding diodes be tested, examined,
and maintained as electric equipment
and records of these activities be kept in
accordance with the provisions of
§ 75.512. (3) Section 77.502 requires that
electric equipment be frequently
examined, tested, and maintained by a
qualified person to ensure safe operating
conditions and that a record of such
examinations be kept. Section 77.502–2
requires these examinations and tests at
least monthly. (b) Examinations of HighVoltage Circuit Breakers (1) Section
75.800 requires that circuit breakers
protecting high-voltage circuits, which
enter the underground area of a coal
mine, be properly tested and maintained
as prescribed by the Secretary. Section
75.800–3 requires that such circuit
breakers be tested and examined at least
once each month. Section 75.800–4
requires that a record of the
examinations and tests be made. (2)
Section 75.820 requires persons to lockout and tag disconnecting devices when
working on circuits and equipment
associated with high-voltage longwalls.
(3) Section 75.821(a) requires testing
and examination of each unit of highvoltage longwall equipment and circuits

VerDate Sep<11>2014

19:00 Nov 05, 2020

Jkt 253001

to determine that electrical protection,
equipment grounding, permissibility,
cable insulation, and control devices are
being properly maintained to prevent
fire, electrical shock, ignition, or
operational hazards. These tests and
examinations, including the activation
of the ground-fault test circuit, are
required once every seven days. Section
75.821(b) requires that each ground-wire
monitor and associated circuits be
examined and tested at least once every
30 days. Section 75.821(d) requires that,
at the completion of examinations and
tests, the person making the
examinations and tests must certify that
they have been conducted. In addition,
a record must be made of any unsafe
condition found and any corrective
action taken. These certifications and
records must be kept at least 1 year. (4)
Section 77.800 requires that circuit
breakers protecting high-voltage
portable or mobile equipment be
properly tested and maintained. Section
77.800–1 requires that such circuit
breakers be tested and examined at least
once each month. Section 77.800–2
requires a record of each test,
examination, repair, or adjustment of all
circuit breakers protecting high-voltage
circuits. (c) Examinations of Low- and
Medium Voltage Circuits (1) Section
75.900 requires that circuit breakers
protecting low- and medium voltage
power circuits serving three-phase
alternating-current equipment be
properly tested and maintained. Section
75.900–3 requires that such circuit
breakers be tested and examined at least
once each month. Section 75.900–4
requires that a record of the required
examinations and tests be made. (2)
Section 77.900 requires that circuit
breakers protecting low- and medium
voltage circuits which supply power to
portable or mobile three-phase
alternating-current equipment be
properly tested and maintained. Section
77.900–1 requires that such circuit
breakers be tested and examined at least
once each month. Section 77.900–2
requires that a record of the
examinations and tests be made. (d)
Tests and Calibrations of Automatic
Circuit Interrupting Devices Section
75.1001–1(b) requires that automatic
circuit interrupting devices that protect
trolley wires and trolley feeder wires be
tested and calibrated at intervals not to
exceed 6 months. Section 75.1001–1(c)
requires that a record of the tests and
calibrations be kept. For additional
substantive information about this ICR,
see the related notice published in the
Federal Register on July 23, 2020 (85 FR
44546).

PO 00000

Frm 00058

Fmt 4703

Sfmt 4703

This information collection is subject
to the PRA. A Federal agency generally
cannot conduct or sponsor a collection
of information, and the public is
generally not required to respond to an
information collection, unless the OMB
approves it and displays a currently
valid OMB Control Number. In addition,
notwithstanding any other provisions of
law, no person shall generally be subject
to penalty for failing to comply with a
collection of information that does not
display a valid OMB Control Number.
See 5 CFR 1320.5(a) and 1320.6.
DOL seeks PRA authorization for this
information collection for three (3)
years. OMB authorization for an ICR
cannot be for more than three (3) years
without renewal. The DOL notes that
information collection requirements
submitted to the OMB for existing ICRs
receive a month-to-month extension
while they undergo review.
Agency: DOL–MSHA.
Title of Collection: Examinations and
Testing of Electrical Equipment,
Including Examination, Testing, and
Maintenance of High Voltage Longwalls.
OMB Control Number: 1219–0116.
Affected Public: Businesses or other
for-profits institutions.
Total Estimated Number of
Respondents: 674.
Total Estimated Number of
Responses: 291,074.
Total Estimated Annual Time Burden:
55,339 hours.
Total Estimated Annual Other Costs
Burden: $0.
(Authority: 44 U.S.C. 3507(a)(1)(D))
Dated: November 2, 2020.
Anthony May,
Management and Program Analyst.
[FR Doc. 2020–24655 Filed 11–5–20; 8:45 am]
BILLING CODE 4510–43–P

DEPARTMENT OF LABOR
Secretary’s Order 10–2020—Statement
of Policy Regarding Independence of
Advisory Committee Members
ACTION:

Notice.

SUPPLEMENTARY INFORMATION:

1. Purpose. To strengthen the quality
and reliability of advice provided by
advisory committees to the Department
of Labor, by identifying factors to be
used in selecting committee members
that will increase transparency in the
disbursement of taxpayer dollars,
enhance public confidence in advisory
committees, and promote efficiency in
the selection of candidates to serve on
advisory committees.
2. Authorities and Directives Affected.

E:\FR\FM\06NON1.SGM

06NON1


File Typeapplication/pdf
File Modified2020-11-06
File Created2020-11-06

© 2024 OMB.report | Privacy Policy