NESHAP for Taconite Iron Ore
Processing (40 CFR part 63 subpart RRRRR) (Final Rule)
Revision of a currently approved collection
No
Regular
12/22/2020
Requested
Previously Approved
36 Months From Approved
06/30/2022
32
23
1,483
483
521,000
521,000
The National Emission Standards for
Hazardous Air Pollutants (NESHAP) for the regulations published at
40 CFR Part 63, Subpart RRRRR were proposed on December 18, 2002,
promulgated on October 30, 2003, and amended on April 20, 2006.
These regulations apply to existing facilities and new taconite
iron ore processing facilities that emit or have the potential to
emit a single hazardous air pollutant (HAP) at a rate of 10 tons or
more per year or any combination of HAPs at a rate of 25 tons or
more per year. The affected sources are ore crushing and handling
operations, ore dryers, indurating furnaces, finished pellet
handling emission units, and fugitive dust emissions. New
facilities include those that commenced construction or
reconstruction after the date of proposal. This information is
being collected to assure compliance with 40 CFR Part 63, Subpart
RRRRR. The final RTR amendments to the rule eliminate the startup,
shutdown, and malfunction (SSM) exemption; remove the SSM plan
requirement; add electronic submittal of notifications, semiannual
reports, and performance test reports; remove requirements to
conduct quarterly internal inspections of baghouses if the baghouse
is equipped with a bag leak detection system; reduce from 2 hours
to 1 hour the duration of each PM test run; and make technical and
editorial changes. The remaining portions of the NESHAP remain
unchanged. In general, all NESHAP standards require initial
notifications, performance tests, and periodic reports by the
owners/operators of the affected facilities. They are also required
to maintain records of the occurrence and duration of any startup,
shutdown, or malfunction in the operation of an affected facility,
or any period during which the monitoring system is inoperative.
These notifications, reports, and records are essential in
determining compliance, and are required of all affected facilities
subject to NESHAP.
Amendments to the NESHAP for
Taconite Iron Ore Processing facilities (1) adjust references to
the Part 63 General Provisions (40 CFR, Part 63, Subpart A) and
revise provisions in the NESHAP (40 CFR Part 63, Subpart RRRRR) to
remove the SSM exemption and SSM plan requirement; (2) add
electronic submittal of notifications, semiannual reports, and
performance test reports; and (3) make technical and editorial
changes. Where applicable, adjustments for these final RTR
amendments are reflected in Tables 1 and 2 of this ICR. The burden
estimate for familiarizing with regulatory requirements was
increased to reflect the actual time it would take industry to
review the final amendments. Many of the burden items are one-time
requirements that would apply only to new respondents and no new
respondents are anticipated over the 3-year period of this ICR.
Costs charged by testing contractors for Method 5 PM performance
tests increase over time. Burden estimates were added for the
industry to prepare notifications of performance test/performance
evaluation, report the results of the performance tests through the
ERT, prepare notification of compliance status, record failures to
meet standards and actions taken to minimize emissions, transition
to submitting notifications and semiannual reports through CEDRI,
and compile data for semiannual reports. Burden estimates were
removed for developing SSM plans and submitting periodic SSM
reports.
On behalf of this Federal agency, I certify that
the collection of information encompassed by this request complies
with 5 CFR 1320.9 and the related provisions of 5 CFR
1320.8(b)(3).
The following is a summary of the topics, regarding
the proposed collection of information, that the certification
covers:
(i) Why the information is being collected;
(ii) Use of information;
(iii) Burden estimate;
(iv) Nature of response (voluntary, required for a
benefit, or mandatory);
(v) Nature and extent of confidentiality; and
(vi) Need to display currently valid OMB control
number;
If you are unable to certify compliance with any of
these provisions, identify the item by leaving the box unchecked
and explain the reason in the Supporting Statement.