Public Libraries Survey

The Institute of Museum and Library Services (IMLS) has administered the Public Libraries Survey (PLS) since October 1, 2007. From its inception in 1989 until 2007, the survey was administered by the National Center for Education Statistics (NCES). The survey data are collected under the Museum and Library Services Act of 2018, as stated in 20 U.S.C sec. 9108 (policy research, data collection, analysis and modeling, evaluation, and dissemination). Current, accurate, and ongoing collection of library data is an essential foundation for quality library services in the United States. IMLS is committed to the continued excellence of this program.

The PLS first began to take shape in 1985, when NCES and the American Library Association conducted a pilot project in 15 states to assess the feasibility of a federal–state cooperative program for collecting public library data. The NCES and the U.S. Department of Education’s former Library Programs office jointly funded this project. In 1987, the project’s final report recommended the development of a nationwide data collection system. The Hawkins-Stafford Elementary and Secondary School Improvement Amendments of 1988 (P.L. 100-297)¹ charged NCES with developing a voluntary federal–state cooperative system (FSCS) for the annual collection of public library data. NCES and the U.S. National Commission on Libraries and Information Science (NCLIS) formed a task force to carry out this mandate, establishing the FSCS in 1988.

The 1988 NCES-NCLIS task force evolved into the FSCS Steering Committee. This committee has been integral to the design and conduct of the survey. Its membership has included State Data Coordinators (SDCs), representatives of the Chief Officers of State Library Agencies, NCLIS, the American Library Association, IMLS, the U.S. Census Bureau (the former data collection agent), and NCES. With the transition of the collection from NCES to IMLS, the steering committee was renamed the Public Library Statistics Cooperative. Effective December 2008, this committee became part of the new Library Statistics Working Group (LSWG).

SDCs, appointed by Chief Officers of state library administrative agencies, submit data for the annual PLS for a universe of more than 9,300 public libraries with approximately 17,000 individual public library outlets in the 50 states, the District of Columbia, and the outlying territories. IMLS releases the collection results in an annual data file, the only national database on public libraries, as well as a report based on the survey. Federal, state, and local officials; professional associations; researchers; educators; local practitioners; and other interested parties use these data for planning, research, evaluation, and policymaking decisions.

1.2 Reporting Data: Administrative Entities and Outlets

The PLS collects data on administrative entities and outlets.

The administrative entity (AE) is the legally established agency that provides library services to the population of a local jurisdiction. An AE must operate one or more direct public library service outlets. The AE’s offices may be located in one of the outlets (e.g., a single-outlet central library or a branch of a decentralized multi-outlet operation) or in separate quarters (e.g., an office adjacent to an independent bookmobile’s garage). The data reported for each AE are the combined data for all of its outlets. (See Appendix A to review the AE data elements included on the PLS.)

An outlet is a unit (i.e., central, branch, bookmobile, books-by-mail only) of an AE that provides direct public library services. A single-outlet central library should not be confused with the AE to which it belongs. Some data are reported for each outlet of an AE, such as the outlet’s name, address, telephone number, type of outlet, and square footage. (See Appendix A to review the outlet data elements included on the PLS.)

1.3 PLS Web Portal Revisions

The FY 2020 PLS Web Portal did not have any major structural revisions, any revisions to the PLS Web Portal were minor enhancements to the interface and/or functionality. Remember, the PLS Web Portal has a new URL: https://submitpls.imls.gov.

1.4 Data Element Changes

This section outlines changes to data elements for the FY 2020 data collection:

1.4.1 Revised Data Element

Data Element 502, Reference Transactions (REFERENC)
- The definition was modified for this data element. This revision does not affect the specification of the PLS Web Portal.

1.4.2 Deleted Data Elements

Data Element 460, Current Print Serial Subscriptions (SUBSCRIP)
Data Element 500, Public Service Hours Open Per Year (HRS_OPEN)

NOTE: The deletion of data element 500 (HRS_OPEN) only removes the data element from the set of data elements that states report to IMLS. Therefore, the column for HRS_OPEN has been removed from the Import File Specifications. The PLS Web Portal will automatically populate a value for data element 500 for each administrative entity (AE) from the sum of values reported in data element 713 (HOURS) for each of the AE’s outlets. As a result, data element 500 (HRS_OPEN) will still exist in the data files that states export from the PLS Web Portal as well as the final, national data files released by IMLS.

1.4.3 Added Data Elements

Data Element Number	Data Element Name (Variable Name)	Data Element Definition
501a	Library Visits Reporting Method (VISITRPT)	Regarding the number of Library Visits (data element #501) entered, is this an annual count or an annual estimate based on a typical week or weeks? Select one of the following: CT—Annual Count ES—Annual Estimate Based on Typical Week(s)
502a	Reference Transactions Reporting Method (REFERRPT)	Regarding the number of Reference Transactions (data element #502) entered, is this an annual count or an annual estimate based on a typical week or weeks? Select one of the following: CT—Annual Count ES—Annual Estimate Based on Typical Week(s)
510	Closed Outlets Due to COVID-19 (C19CLOSE)	Answer <Y>es or <N>o to the following question: “Were any of the library’s outlets physically closed to the public for any period of time due to the Coronavirus (COVID-19) pandemic?” NOTE: An outlet is considered physically closed when the public cannot access any library buildings or bookmobiles, regardless of staff access. A building can be physically closed but still offer virtual, Wi-Fi, or “curbside” services outside the building.
511	Public Services During COVID-19 (C19PUBSV)	Answer <Y>es or <N>o to the following question: “Did library staff continue to provide services to the public during any portion of the period when the building was physically closed to the public due to the Coronavirus (COVID-19) pandemic?” NOTE: Services to the public can include activities such as answering calls, emails, or texts with answers to information requests from the public; hosting virtual programming or recorded content; offering “curbside,” delivery (mail or drop-off), or drive-thru circulation of physical materials; managing IT services to ensure external Wi-Fi access; and providing other types of online and electronic services, regardless of the location of library staff when they provided services (i.e., working from home or in the building that was closed to the public).
512	Electronic Materials Added Due to COVID-19 (C19ELMAT)	Answer <Y>es or <N>o to the following question: “Did the library add or increase access to electronic collection materials due to the Coronavirus (COVID-19) pandemic?” NOTE: Adding or increasing materials can include increasing the concurrent or monthly borrowing limits for electronic materials, increasing the number of electronic materials and holdings, or otherwise augmenting the public’s ability to use electronic materials. These materials can include those the library did not pay for itself, such as those provided through the state library administrative agency, library consortium, or vendor at no cost in response to the pandemic. Types of electronic materials include e-books, audio and video downloadables, e-serials (including journals), government documents, databases (including locally mounted, full text or not), electronic files, reference tools, scores, maps, or pictures in electronic or digital format, including materials digitized by the library.
513	Electronic Library Cards Issued Before COVID-19 (C19ECRD1)	Answer <Y>es or <N>o to the following question: “Did the library allow users to complete registration for library cards online without having to come to the library before the Coronavirus (COVID-19) pandemic?” NOTE: Online library cards provide users access to electronic collection materials and databases without having to be physically present at a library outlet to register for the card. Refer to the definition of Number of Registered Users (data element #503).
514	Electronic Library Cards Issued During COVID-19 (C19ECRD2)	Answer <Y>es or <N>o to the following question: “Did the library allow users to complete registration for library cards online without having to come to the library during the Coronavirus (COVID-19) pandemic?” NOTE: Online library cards provide users access to electronic collection materials and databases without having to be physically present at a library outlet to register for the card. Refer to the definition of Number of Registered Users (data element #503).
515	Reference Service During COVID-19 (C19REFER)	Answer <Y>es or <N>o to the following question: “Did the library provide reference service via the Internet or telephone when the building was physically closed to the public during the Coronavirus (COVID-19) pandemic?” NOTE: Refer to the definition of Reference Transactions (data element #502). Include references service provided via email, chat, and text.
516	Outside Service During COVID-19 (C19OUTSD)	Answer <Y>es or <N>o to the following question: “Did the library provide ‘outside’ service for circulation of physical materials at one or more outlets during the Coronavirus (COVID-19) pandemic?” NOTE: Includes any contactless or minimal contact provision of circulation items. Similar terms could include curbside, vestibule, or porch pickups, delivery (mail or drop-off), drive-thru, etc.
517	Live Virtual Programs During COVID-19 (C19LIVEP)	Answer <Y>es or <N>o to the following question: “Did the library provide live, virtual programs via the Internet during the Coronavirus (COVID-19) pandemic?” NOTE: Live, virtual programs (see definition of Total Number of Library programs, data element #600) are conducted via a Web conferencing or Webinar platform such as Facebook, YouTube, or Zoom, during which a library staff member (or other party sponsored by the library) is presenting to or interacting with an audience in real-time.
518	Recordings of Program Content During COVID-19 (C19RECDP)	Answer <Y>es or <N>o to the following question: “Did the library create and provide recordings of program content via the Internet during the Coronavirus (COVID-19) pandemic?” NOTE: Recordings of program content include video or audio recordings created by a library staff person (or other party sponsored by the library) and posted to a video or audio hosting platform for the audience to view or listen to on-demand. Do not include promotional or marketing content.
519	External WiFi Access Before COVID-19 (C19XWIF1)	Answer <Y>es or <N>o to the following question: “Did the library provide Wi-Fi Internet access to users outside the building at one or more outlets before the Coronavirus (COVID-19) pandemic?” NOTE: Includes “parking lot access,” bookmobiles or other mobile facilities with Wi-Fi capabilities.
520	External WiFi Access Added During COVID-19 (C19XWIF2)	Answer <Y>es or <N>o to the following question: “Did the library intentionally provide Wi-Fi Internet access to users outside the building at one or more outlets during the Coronavirus (COVID-19) pandemic?” NOTE: Includes “parking lot access,” bookmobiles or other mobile facilities with Wi-Fi capabilities.
521	External WiFi Access Increased During COVID-19 (C19XWIF3)	Answer <Y>es or <N>o to the following question: “Did the library increase access to Wi-Fi Internet access to users outside the building at one or more outlets during the Coronavirus (COVID-19) pandemic?” NOTE: Includes “parking lot access,” bookmobiles or other mobile facilities with Wi-Fi capabilities. Increasing access could mean removing restrictions on sign-in authorizations, expanding router reach, leaving Wi-Fi service on 24 hours, installing or moving access points to promote or improve external access, etc.
522	Staff Re-Assigned During COVID-19 (C19STOTH)	Answer <Y>es or <N>o to the following question: “Did library staff work for other government agencies or nonprofit organizations instead of, or in addition to, their normal duties during the Coronavirus (COVID-19) pandemic?” NOTE: Include reassignments to other government agencies (e.g., to process unemployment claims), as well as other activities such as the use of library staff to distribute school lunches and other materials. Volunteering during work hours would count but volunteering off hours would not.
715	Number of Weeks an Outlet Closed Due to COVID-19 (C19WKSCL)	This is the number of weeks during the year that due to the Coronavirus (COVID-19) pandemic, an outlet building was physically closed and the public could not enter, when it otherwise would have been open. NOTE: Round to the nearest whole number. If building did not close to the public due to the pandemic, enter zero. The sum of data elements #714 and #715 should equal or be fewer than 52 weeks. An outlet is considered physically closed when the public cannot access any library buildings or bookmobiles, regardless of staff access. A building can be physically closed but still offer virtual, Wi-Fi, or “curbside” services outside the building.
716	Number of Weeks an Outlet Had Limited Occupancy Due to COVID-19 (C19WKSLO)	This is the number of weeks during the year that an outlet implemented limited public occupancy practices for in-person services at the library building in response to the Coronavirus (COVID-19) pandemic. NOTE: Round to the nearest whole number. If building did not have a limited occupancy or similar practice due to the pandemic, enter zero. Weeks can be counted in both data elements #714 and #716 (that is, a library was open to the public and implementing limited occupancy practices in the same week). Data element #716 should not be greater than data element #714. Limited public occupancy practices can include reduced hours open, limits on the number of public members inside the physical building, appointment only on-site library use, visitor time limits, closed stacks or meeting rooms, etc.

2 Getting Started

The data collection process begins when you first receive an e-mail from AIR. This e-mail from AIR will include your login credentials (username and link to create your password). If you are a returning SDC, the e-mail will include only a link to the PLS Web Portal because your credentials are the same as your login credentials for the FY 2019 PLS collection. If you do not remember your password or wish to reset your password, select the Forgot Password button, and follow the on-screen instructions.

After you log in to the PLS Web Portal (https://submitpls.imls.gov), you must enter your state characteristics. After you enter the state characteristics information, the PLS Web Portal will use your FY 2019 data to prepopulate the current year (FY 2020) data in the AE and outlet sections of the PLS Web Portal. If you have minimal changes between FY 2019 and FY 2020 collections, the pre-population will help in updating your data. Please import or input your FY 2020 AE and outlet data to continue.

Different areas of the PLS Web Portal will become available to you as you progress through the collection process. After you input all data, perform a successful match, and complete an edit review (i.e., no critical edits remain, and all non-critical and internal edits have been annotated), you can lock your data. Your submission is complete when you lock your data. Detailed instructions about these steps are in Section 2.3.

NOTE: You must enter data on the state characteristics page before you can access the Import Data or Input Data features.

Exhibit 2.1 shows the process for collecting the PLS data.

Exhibit 2.1. PLS Data Collection Process

Shape2

2.1 Login

To access the PLS Web Portal, a username and password are required. Your username will be your e-mail address. On the day the PLS Web Portal opens, AIR will send you login instructions via e-mail. If you have any trouble logging in to the PLS Web Portal, please contact us at [email protected] or 1-866-744-5746, option 1 from Monday through Friday, 9 a.m. to 5 p.m. Eastern Time.

The URL for logging in to the PLS Web Portal is https://submitpls.imls.gov. See Exhibit 2.2 for a screenshot of the PLS Web Portal login page.

If you forgot your password, click Forgot Password on the login page, or go directly to https://submitpls.imls.gov/Account/ForgotPassword. This link will take you to a page where you will enter your username (e-mail address) and then click Submit, which will automatically send you an e-mail with a temporary link to reset your password. The process will be the same as when you created your initial password.

NOTE: Your password must contain at least eight characters, one lowercase letter, one uppercase letter, one digit, and one special character. Valid special characters are: @ ! # $ % ^ & + =

Use the following space to write your username and password:

Username (e-mail address):
Password:

Exhibit 2.2 PLS Web Portal Login Page

Shape5 Shape4 Shape3

2.2 PLS Web Portal

The first time you successfully enter the PLS Web Portal (https://submitpls.imls.gov), you will see step-by-step instructions for entering your data, which are the same as the Web Instructions in Section 2.3. You can access these instructions again, at any time, from the Help menu at the top right of the page.

2.2.1 Home

The Home page (Exhibit 2.3) will be the first page you will go to after you log in and after you close out the Web instructions on your first login. This is a landing page where you can quickly view your survey status, access important documents, and view any important correspondence. This page includes the following tools and resources:

Survey Information: This table provides an update of the status and next processing steps for your survey and is an abbreviated version of the Survey Status table. You can view the full table by clicking Survey Status in the dark green navigation bar at the top of the page.
Import a New File: This link takes you directly to the Import Data page so that you can import additional files. You also can access Import Data from the Tools drop-down menu in the dark green navigation bar.
Helpful Documents: This section provides easy access to documents that will be useful during data collection, including Web Instructions (see Section 2.3), this User’s Guide, and the Match and Edit Report Terminology reference guide. These links will open in separate browser windows.
Latest Correspondence: This section includes any updates we may need to convey to you during the data collection process or reminders of important deadlines.
Navigation Bar: The dark green navigation bar at the top of the page provides links and drop-down menus to different pages of the survey. This navigation bar will always be present throughout the survey.
Help Desk Information: The contact information for the Help Desk is located at the bottom of every page.

Exhibit 2.3 PLS Web Portal Home Page

Shape13 Shape12 Shape11 Shape10 Shape9 Shape8 Shape7 Shape6

2.2.2 Survey Status

In addition to the Survey Information table on the Home page, you can refer to the Survey Status page (Exhibit 2.4) to see where your submission stands at any time and what your next steps are in the data submission process.

NOTE: Once you have saved your State Characteristics data in the system, the Survey Status table will automatically indicate that you have data for the Administrative Entities and outlets.

This process will happen before you upload your AE or outlet data. The status reflects that your current year data have been prepopulated with your prior year data. You will still need to import or input current year AE and outlet data. The Survey Status will update to let you know when to run a Match or Edit report and if you need to make any changes to the data.

Exhibit 2.4 PLS Web Portal Survey Status Page

2.3 Web Instructions

The following instructions for SDCs will pop up when you first log in at the PLS Web Portal. After your initial login, these instructions are available under the Help menu. Instructions for Chief Officers are available in Section 8.1 of this User’s Guide.

Step 1: You must enter your State Characteristics data before you can input or import AE or outlet data.

Select Tools then Input Data: State Char.

Enter data into the fields, and press the Save button.
Press the Print button to print a copy of your state’s data.

Step 2: Import or manually enter Administrative Entity (AE) data.

Option 1—Import Data Files:
- Select Tools then Import Data
- Select the Browse button to find your AE file.

Once you have selected your AE file, click the Upload and Import File button.
Select the Administrative Entity option in the pop-up window, and click the Yes, Import File button.
Once the file is uploaded, you will see a pop-up window indicating whether your upload was successful or had errors.

If you receive an import error, click the Download Errors link in the pop-up window to open or save ParserErrors.txt. This file contains your import errors and can be displayed on the screen or downloaded and saved for further review.

Review all import errors, revise, and re-import the data files.
NOTE: You must correct all import errors before you can continue.

Option 2—Manually Enter Data:
- You can enter AE data manually by selecting Tools then Input Data: AE.

The top horizontal section labeled Administrative Entity allows you to navigate between AEs. Use the innermost arrows to navigate to the previous or next AE on the list. Use the outermost arrows (with a line) to navigate to the first or last AE. You can use the drop-down menu to navigate to a specific AE.
The left vertical menu labeled Section Navigation allows you to navigate to specific sections of questions for the AE and outlet data collection.

Step 3: Outlet data are preloaded from the prior year’s file.

Option 1—Import Data Files: If there are major changes to the data, we suggest importing a new outlet file by selecting Tools then Import Data.

You can make minor changes by selecting Associated Outlet(s) under Selection Navigation in Input Data: AE from the Tools menu.

Option 2—Manually Enter Data: You can update outlet data manually by selecting Tools then Input Data: Outlet.

Step 4: Select Reports then Run Match Report after all data have been imported or entered.

The Match process will run in the background. When the Match process is completed, select the Download Match Report button. AIR recommends saving the workbook to your hard drive and using it as a reference when correcting any errors found in your AE and/or outlet files.
All match errors must be resolved before you can run your edit report (Step 5).

We suggest that you correct your data file(s) and re-import the revised data. You can change only PARENTID, LINKID, and OLDID using this method.
You can manually correct the data using the Input Data or Structure Changes menus (under Tools). However, you can revise PARENTID, LINKID, and OLDID only by correcting and re-importing your data file.

Check the Restorable AE and Restorable Outlet tabs on your Match Report.

These tabs provide a list of all closed, deleted, and temporarily closed entities for your state. We suggest checking these tabs to make sure that any AEs or outlets you are trying to open (birth; Structure Code 02) are truly new.

NOTE: You must re-import your outlet file each time you import an AE file. If you do not re-import your outlet file, your outlet data will revert to the prior year’s data.

Step 5: Once your Match Report is resolved, select Reports then Run Edit Report.

NOTE: All match errors must be resolved before you can run your edit report.
The Edit Report process runs in the background and can take several minutes depending upon the amount of data. When the Edit Report process is completed, select the Download Edit Report button. Review all the Edit Report worksheets contained within the downloaded Excel file. AIR recommends saving the workbook to your hard drive in order to record your annotations during your review of the reports.
All critical edits must be resolved and noncritical edits annotated before you can lock your data (Step 6).

Address Critical Edits. We suggest that you correct your data file(s) and re-import the revised data. You also can manually correct the data using the Input Data menu (under Tools).
Annotate Noncritical Edits. You can annotate noncritical edits in the Edit Report Excel worksheets or as a separate Annotation File. Once all noncritical edits are annotated, you will import the annotations by selecting Tools then Import Data and uploading the annotated Edit Report Excel file (file type: Edit Report) or separate Annotation Excel file (file type: Annotation).
Rerun Match and Edit Reports. Once you have addressed the critical edits, rerun your Match Report, correct any issues found, and then rerun the Edit Report.

Step 6: Once you are satisfied with your data, select Tools then Lock Data.

NOTE: After you have locked your PLS survey submission, you will not be allowed to change any data.
If you need to make revisions, please contact us at [email protected] or 1-866-744-5746, option 1, and we will assist you in correcting your data submission.
When you lock your data, you will be asked to estimate the number of hours it took for you to complete the survey.
After locking your data, the PLS Web Portal will send an automated e-mail to you, notifying you that the data are locked, and that AIR will conduct post-lock data review. AIR may send you questions requesting clarification of your submission.
Once the post-lock data review is completed, an email with be sent to your Chief Officer requesting that they certify the data. You will be copied on the certification request e-mail.

2.4 Other Helpful Tools

2.4.1 Export Data

The Export Data feature is located under the Tools menu (Exhibit 2.5). Current year and prior year data are available for AEs, outlets, and state characteristics in either individual files or one collective file. AE and outlet records deleted on the prior year data (i.e., closed or removed as an incorrect record) are available from the Export Data page should any of these records need to be restored to the survey. AE and outlet records deleted in the current year data are available only on the Match Report’s restorable tabs. To export and re-import a file downloaded from the PLS Web Portal, select Data ready to re-import under Select File Format(s). This file format keeps the FSCS ID assignments for re-import. This format also will allow you to export your file with changes you made in the PLS Web Portal, make further revisions, and re-import the file.

To obtain the files:

Click Tools then Export Data.
Select the file format you would like to download.
Select the data set you would like to export.
Click Generate File Export.
Access the file according to your Web browser settings.

NOTE: How you access downloaded files depends on your Web browser and settings. The file may download and save to a specific folder automatically (e.g., Firefox), remain in your browser downloads until you click on it (e.g., Chrome), or you may be asked where you would like to save the file (e.g., Internet Explorer).

To export all the current year and prior year data into one Excel file, you can click Export All Datasets in 1 Excel File. This file will include all data sets, plus the restorable AE and outlets.

Exhibit 2.5 PLS Web Portal Export Data Page

2.4.2 Tables

The Run Tables feature is located under the Reports menu and creates an Excel workbook that contains 18 tables. You will be able to save the Tables Report to your hard drive. There are two summary tables and 16 individual library tables. The two summary tables are a two-year comparison of the state totals for each survey item and a two-year comparison of the item response rates for the state. The individual library tables list each library in the state, and some tables report the per capita and percent distributions for those individual libraries.

The two summary tables provide a macro view of the state’s library data. The individual library tables provide a micro view of the individual libraries.

To run and save your tables:

Click Reports then Run Tables.
Click the Download Tables Report button.
Access the file according to your Web browser settings.

NOTE: The time stamp on the Reports table is in Eastern Time. You may use the following chart to convert the time:

Time Zone	Time Difference From Eastern Time	Time in Time Zone (if time in Eastern Time is 12 p.m. Monday)
Atlantic	+ 1 hour	1 p.m. Monday
Eastern	0 hour	12 p.m. Monday
Central	-1 hour	11 a.m. Monday
Mountain	-2 hours	10 a.m. Monday
Pacific	-3 hours	9 a.m. Monday
Alaska	-4 hours	8 a.m. Monday
Hawaii-Aleutian	-5 hours	7 a.m. Monday
Samoa	-6 hours	6 a.m. Monday
Chamorro	+15 hours	3 a.m. Tuesday

2.4.3 Help Menu Options

The Help menu provides access to this User’s Guide and all appendices in the User’s Guide. These links will open in separate browser windows.

Web Instructions

The Web Instructions (also found at the beginning of this section) include a two-page list of the necessary steps to complete the submission process for the survey. In addition, this page is displayed the first time you log in at the PLS Web Portal.

Data Element Definitions

Data Element Definitions (part of Appendix A) are all the items collected on the survey, with the official definitions and item numbers.

Name, Address, and Structure Changes

Name, Address, and Structure Changes (Appendix B) provide descriptions and diagrams of the correct format of records for administrative entities and outlets.

Resolving the Match Report

Resolving the Match Report (Appendix C) is a more detailed list of suggestions than is available in Section 5.

Import Specifications

The import files must conform exactly to the specifications provided (Appendix D).

PLS Contacts

PLS Contacts (Appendix E) is a list of AIR and IMLS contact information, including the Help Desk telephone number and e-mail address. The Help Desk contact information is also located at the bottom of every page of the PLS Web Portal.

Francis Keppel Award Criteria

The Francis Keppel Award for timely and accurate submission of data is based on a point system (Appendix F) covering important aspects of the original-submission and post-submission processing.

Standard Abbreviations

Standard Abbreviations (Appendix G) are used in this survey when the data exceed the field length.

Edit Messages and Conditions (available online but not in print)

Edit Messages and Conditions is a list of all checks performed by the Edit Report routine as well as a list of internal checks executed by AIR during the post-lock edit follow-up.

2.5 External Links

The following external links might be helpful in preparing for the FY 2020 data submission. These links will open in separate browser windows.

IMLS Public Libraries Survey (https://www.imls.gov/research-evaluation/data-collection/public-libraries-survey)

This external link will take you to the IMLS PLS page. Items found on this page include the following:

Public release data files and publications for the previous years of the PLS
Search for Public Libraries tool that will search for public libraries by Library System, Central Library, Branch Library, Bookmobiles, and Books-by-Mail
Resources to help you report PLS data, including links to the PLS Web Portal and training materials

3 Import

3.1 Overview

After entering the state characteristics data, you can import data for AEs, outlets, and annotation files into the PLS Web Portal. The Administrative Entity Import File Specifications, Outlet Import File Specifications, and Annotation Import File Specifications are located in Appendix D.

You can import AE data, outlet data, the Annotation File, and the Annotated Edit Report in Excel (.xls or .xlsx), comma delimited text (.csv), or fixed length text formats (.txt).
Each import file must contain only records of the same record type. For example, the AE file can contain only AE records; outlet records cannot be included in the same import file.
To export and re-import a file, choose the Data ready to re-import (Excel file formatted for import) file format found on the Export Data page. This file format keeps the FSCS ID assignments for re-import. This format also will allow you to export your file with changes you made in the PLS Web Portal, make further revisions, and re-import the file.

3.2 Upload and Import Data Files

Once you have prepared your files (see Section 3.4), you need to import the files into the PLS Web Portal.

After you log in at the website, go to Tools then Import Data. Click the Browse button to find the file you wish to import from your computer. After you have located your file, click Upload and Import File (Exhibit 3.1).

Exhibit 3.1 PLS Web Portal Import Data Page

Once you click Upload and Import File, the system will prompt you to choose what type of file you are importing (Administrative Entity, Outlet, Annotation, or Edit Report).

NOTE: When you import a file with the same file name as a previous file, the previous file is deleted. When you click Delete All, all current year imports are deleted from the PLS Web Portal. If you click Delete All AE Data, all of the associated outlet data also are deleted.

Several checks are performed while your file is being imported:

If your AE or outlet file is successfully imported, a message box will display the number of records in the successfully imported file and the number of existing records from the prior year. If the number of imported records is less than the number of prior year records, the following message will display:

WARNING: Imported file may be missing records that existed in the prior year. Please verify by comparing imported file with data export of prior year data. Removal of records (e.g., library closure) must be accomplished using structure status codes; otherwise, prior year data will persist into current year for those records.

Even if the number of imported and prior year records matches, we recommend checking the export of your current year data to confirm that all expected records are present before proceeding with the Match Report.

If you have any problems that prevent a successful import, a message box will prompt you with the record(s) affected. This message box will provide a downloadable report that shows all errors preventing the file from importing. Once these errors are resolved, the file should import correctly. Refer to the following sections for instructions about preparing files for import. Imported data must be valid (see the following table):

Numeric Data Elements
Any positive number for numeric data elements	Enter the appropriate numeric data.
0	Zero for numeric data means the library has none of that item (e.g., the library does not maintain a video collection). Do not use zero when the value is not known (e.g., the city pays benefits but does not provide the figure). Use -1, described next.
-1	-1 means that the appropriate figure is unavailable.
-3	-3 means Not Applicable and is used for this item: Square Footage of Outlet (use only for Bookmobiles and Books-by-Mail Only outlets) Website Visits (library does not have a website)
Alphanumeric Data Elements
Alphabetic or numeric data for alphanumeric data elements	Enter the appropriate alphabetic or numeric data. Some items require the selection of codes for data (e.g., Interlibrary Relationship Code = HQ, ME, or NO). See Appendix A.
-3	-3 means Not Applicable and is used for this item: Phone (use only if library has no phone)
Structure, Name, and Address Changes
-3	-3 means Not Applicable and is used for these items: FSCSKEY, FSCS_SEQ, LINKID, OLDID, and PARENTID

3.3 Uploading Annotation Files

You can import a file that contains annotations prior to running your first Edit Report. You must include the FSCSKEY and Edit ID# for the explanation to apply to the correct edit record. After successfully importing the Annotation File, you can run the Edit Report after you have successfully run the Match Report and have reviewed the results. See Appendix D for the Import File Specifications.

3.4 Preparing Administrative Entity and Outlet Import Files

Each year, your current year records are compared to the prior year information. Any variance in the name, address, or organizational structure between years must be explained by status codes defining the change.

The FSCS ID links each year’s data. You must account for each record as it exists on the final FSCS ID data file for the prior year. You can obtain the prior year information through the Export Data option on the Tools menu.

If you are unsure what changes may have occurred since the last submission, import your file, run the match, and use the report to see what you need to resolve. You can then decide whether to process the changes within the PLS Web Portal (please see details in Section 4), or you can include the information on your data files and import again.

To process structure, name, and location changes from your import file, the following information must be included. Please see Appendix D for technical information about formatting your import records.

STATSTRU: This code indicates the structure status of the record.

00 – No Change

01 – Existing Administrative Entity/Outlet Absorbs Another (Adoption)

02 – Newly Created Administrative Entity/Outlet

03 – Closed Administrative Entity/Outlet (Death)

04 – Move Outlet to Newly Created Administrative Entity (Divorce)

05 – Merge Two or More Administrative Entities/Outlets to Form a New Administrative Entity/Outlet (Marriage)

08 – Restore (Reopen) a Previously Closed Administrative Entity/Outlet

09 – Restore (Undo) a Previously Deleted Administrative Entity/Outlet

10 – Delete an Incorrect Record (includes Out of Scope/Errors or for Planned but Never Opened [formerly 26])²

11 – Outlet Moves to Different Previously Existing Administrative Entity

13 – Add an Existing Administrative Entity/Outlet Not Previously Reported

22 – Future Administrative Entity/Outlet FSCS ID Request

23 – Temporary Closure

24 – Reopen a Temporarily Closed Administrative Entity/Outlet

25 – Nonrespondent Administrative Entity/Outlet

STATNAME: This code indicates the status of the library name.

00 – No Change

06 – Official Name Change

14 – Preferred Spelling for Library Name

STATADDR: This code indicates the status of the physical location.

00 – No Change
07 – Move to a New Location
15 – Preferred Street Address

LINKID: This is an identifier defined by the SDC and is used to associate two or more records that are involved in an adoption or marriage structure change. The LINKID must be unique for each set of records. For example, a merger requires at least three import records with the same LINKID. (See Appendix B, structure change 05 – Merge Two or More Administrative Entities to Form a New Administrative Entity [Marriage]).
PARENTID: This identifier is on the outlet import file and is used to associate an outlet to its parent AE. The value for this field should be the same as the LIBID of the parent AE.
OLDID: This identifier is reserved for structure changes where it is necessary to track the prior year FSCSKEY information for records that will not be on the current year file.

4 User Options, Input Data, and Structure Changes

The Tools menu contains selections that allow you to enter data directly into the PLS Web Portal:

User Options allows you to choose the sort order for retrieving AE and outlet records and viewing the Edit Report. You can also choose to save changes automatically (default option). These options are available on every Input Data page.
Input Data is the only means of entering State Characteristics data. It also provides access to current AE and outlet records.
Structure Changes allows you to add, close, modify, or restore AEs or outlets. You also can reset a record previously coded or marked for a structure change. Choose AE or Outlet, as appropriate, for the change you want to make. For further details, see Section 4.3.

4.1 User Options

The User Options selected in Exhibit 4.1 are the default settings.

Exhibit 4.1 PLS Web Portal User Option Page

4.1.1 Sort Order for Administrative Entities or Outlets in Input Data

You determine how your AE records display. Sorting can be by:

FSCS ID (default setting)
LIBID
NAME
CITY

4.1.2 Sort Order for Edit Report by Edit Number

You can sort your Edit Report by Edit Number with these options:

Edit number by FSCS ID (default setting)

Edit number by Annotation Status by FSCS ID

4.1.3 Auto Save Data in Input Data

You can set this option to:

Yes (default setting; the system automatically saves your data whenever values are updated)
No

NOTE: The Auto Generate Totals option has been removed. The PLS Web Portal automatically generates totals for data input through the Input Data pages. It is not possible to turn off the automatic totals.

4.2 Input Data Through PLS Web Portal

Select Tools then State Char, AE, or Outlet to navigate to the page you wish to update. Buttons that allow you to Save and Print Page appear at the bottom of every page. Use the tab key to move from field to field, or use your mouse by clicking on the section you wish to go to under Section Navigation.

By default, the user options are set to automatically save your corrections. If you choose not to save your corrections automatically, be sure to click Save before leaving the page. To exit any of these pages, select Home from the navigation bar to return to the main PLS Web Portal page.

4.2.1 State Characteristics

This page consists of four data items for you to fill out. Once you have completed your updates and saved your data, you can return to the Home page or Survey Status page to check for further actions.

4.2.2 Administrative Entity (AE)

Data for AE records are collected in nine sections, or pages. An additional section for the associated outlets is available to access outlet data for that AE. The names of each section are provided as links on the left side of the page. You can use your mouse to click on any of the links to go to the section you wish to correct or review.

You can go to another AE record by selecting the record from the drop-down menu at the top of the page. By default, records are listed by FSCS ID. You can choose another sort order under User Options. The arrow buttons available at the top of the page next to the AE name navigate you to the next or previous AE. The arrows with the line will navigate you to the first or last AE in the list.

If you make a change to name and/or address information for an AE, you also must select the appropriate status code (the name/address status codes and their values are included in Appendix B) to identify whether the change is an official name change or whether the address change indicates an actual location change.

NOTE: Any changes to the name or address fields will require you to run the Match Report before you can proceed with any further processing of your submission.

4.2.3 Outlets

Outlet records require only one section and can be accessed through the parent AE record.

You can access all outlet records from the Tools menu. You can navigate through all of the outlet records from this option by using the drop-down menu or the arrow buttons if you choose.

If you make a change to name and address information for an outlet, you also must select the appropriate status code (the name/address status codes and their values are included in Appendix B) to identify whether the change is an official name change or whether the address change indicates an actual location change.

NOTE: Any changes to the name or address fields will require you to run the Match Report before you can proceed with any further processing of your submission.

4.3 Structure Changes

You can add, close, modify, restore, or reset records through the Structure Changes menu. Under Tools, select Structure Changes and then AE or Outlet depending on the record you need to change. Currently, you are restricted to one structure change per AE or outlet record (Exhibits 4.2 and 4.3). See Appendix B for detailed instructions for reporting structure changes via the AE and outlet import files.

NOTE: If an AE or Outlet was closed for part of a fiscal year but you are reporting data for it, do not report it as closed this reporting cycle. Wait until the next reporting cycle, after the entity has closed, when you have no data to report for it, and then report it as closed. If the entity was temporarily closed and reopened during the next fiscal year, such that you have some data to report in consecutive fiscal years, do not report any structure change. Records with structure changes indicating closure will be ignored, and any data reported with those records will be excluded from analysis in the annual PLS report, the supplementary tables, and the state profiles.

NOTE: When you complete all structure changes, you must complete a successful Match Report before you can continue processing your submission.

Exhibit 4.2 PLS Web Portal Structure Change: AE Page

Exhibit 4.3 PLS Web Portal Structure Change: Outlet Page

5 Match Report

After you import or enter data, you must run a successful Match Report. This step is necessary to record structure changes (e.g., new or closed libraries) as well as official name and location changes to ensure file integrity. The Match Report compares your current year records to the prior year records on the publicly released data file using FSCS ID information. After a successful Match has run, new IDs are assigned to new libraries.

From the Reports menu, select Run Match Report to generate an Excel workbook that will detail the results of the Match. If the program does not encounter a problem, any new AEs and outlets are assigned FSCS IDs, and you will see a message to proceed with the Edit Report. If the program cannot resolve the information you provide, you will see messages in the report that identify the problem(s).

You must resolve all discrepancies in the Match Report. You can fix your original file and re-import, or you may be able to resolve problems through the Structure Change options under the Tools menu. If you need the prior year FSCS ID information, you can use the Export Data function under the Tools menu. Appendix C provides additional guidance for understanding the Match Report messages.

NOTE: Any time you import a data file or make any structure, name, or address changes to either an outlet or AE record from the data input pages, you must rerun the Match Report.

5.1 Match Report

Results of the Match Report are displayed in an Excel workbook across multiple worksheets.

The report is not linked to the database (PLS Web Portal). You must make any corrections by either importing a new file or manually inputting data into the PLS Web Portal pages (i.e., Structure Change menu and the name and address status code fields).

NOTE: Sometimes one type of error will produce more than one error message for the Match Report.

The Excel workbook has 10 worksheets, as follows:

Summary: This worksheet provides an overview and count of errors found in the Match Report. Specific errors can be found on the subsequent worksheets.

If you do not have any Match Report problems, you will see the following message:

“Match has completed successfully. Check ‘New ID’ Sheet.”

New FSCS IDs are assigned to new AEs and outlets and are listed on the New ID worksheet.

Otherwise, you will see which of the following conditions failed, with a count of match errors per AE or outlet.

Invalid Status Code (STATSTRU)

Record found current year but not prior year

Record found prior year but not current year

All FSCSKEYs and OLDIDs must be unique (unless -3)

All LIBIDs must be unique for AE records

FSCS ID information must equal -3

FSCS ID information cannot equal -3

LINKID must equal -3

LINKID cannot equal -3

PARENTID must equal -3

PARENTID cannot equal -3

OLDID must equal -3

OLDID cannot equal -3

These records do not comply with the rules for Adoption

These records do not comply with the rules of Marriage

Cannot restore Record, there is no old AE

Administrative Entity does not have any Outlets

Outlet record is not on the AE file

PARENTID is not on the AE file

STATNAME and LIBNAME are inconsistent with the prior year file

STATADDR and ADDRESS are inconsistent with the prior year file

New ID: This worksheet provides the list of new FSCS IDs generated. No resolution is required for these records because the software does not assign new identification numbers until Match is successful.

Admin Single: This worksheet displays problems with structure changes involving only one AE record.

INVALID Status Code

This AE was not on the prior year file

This AE was reported last year but is missing on the current year file

FSCSKEY cannot be -3 for STATUS (00, 08, 09, 24, or 25) Records

FSCSKEY must be -3 for STATUS (02, 03, 04, 05, 10, 13, 22, or 23) Records

LINKID cannot be -3 for STATUS (01 or 05) Records

LINKID must be -3 for STATUS (00, 02, 03, 04, 08, 09, 10, 13, 22, 23, 24, or 25) Records

OLDID cannot be -3 for STATUS (03, 10, or 23) Records

OLDID must be -3 for STATUS (00, 02, 04, 08, 09, 13, 22, 24, or 25) Records

Cannot restore AE, there is no old AE with STATUS (03, 10, or 23)

Admin record does not have any outlets

Admin Multi: This worksheet displays problems with structure changes involving multiple AE records.

All FSCSKEYs and OLDIDs must be Unique (unless -3)

All LIBIDs must be unique for AE records

These records do not comply with the rules of Adoption

These records do not comply with the rules of Marriage

Outlet Single: This worksheet displays problems with structure changes involving only one outlet record.

INVALID Status Code

This Outlet was not on the prior year file

This Outlet was reported last year, but is missing on the current year file

FSCSKEY cannot be -3 for STATUS (00, 08, 09, 24, or 25) Records

FSCSKEY must be -3 for STATUS (02, 03, 04, 05, 10, 11, 13, 22, or 23) Records

FSCS_SEQ cannot be -3 for STATUS (00, 08, 09, 24, or 25) Records

FSCS_SEQ must be -3 for STATUS (02, 03, 04, 05, 10, 11, 13, 22, or 23) Records

LINKID cannot be -3 for STATUS (01 or 05) Records

LINKID must be -3 for STATUS (00, 02, 03, 04, 08, 09, 10, 13, 22, 23, 24, or 25) Records

OLDID cannot be -3 for STATUS (03, 04, 10, 11, or 23) Records

OLDID must be -3 for STATUS (00, 02, 08, 09, 13, 22, 24, or 25) Records

PARENTID cannot be -3 for STATUS (02, 04, 11, 13, or 22) Records

PARENTID must be -3 for STATUS (00, 01, 03, 08, 09, 10, 23, 24, or 25) Records

Cannot restore Outlet, there is no old AE with STATUS (03, 10, or 23)

Outlet Record is not on the AE File

PARENTID is not on the AE File

Outlet Multi: This worksheet displays problems with structure changes involving multiple outlet records.

All FSCSKEYs and OLDIDs must be unique (unless -3)

These records do not comply with the rules of Adoption

These records do not comply with the rules of Marriage

Name Changes: This worksheet displays records with name change problems.

STATNAME Invalid

STATNAME 00 and Name Change

STATNAME 07 and no Name Change

STATNAME 15 and no Name Change

Address Changes: This worksheet displays records with address change problems.

STATADDR Invalid

STATADDR 00 and Address Change

STATADDR 07 and no Name Change

STATADDR 15 and no Name Change

Restorable AE: This worksheet provides a list of all closed, deleted, and temporary closure entities for the state used as a reference.
Restorable Outlet: This worksheet provides a list of all closed, deleted, and temporary closure for the state used as a reference.

5.2 Resolving Unsuccessful Records

Please see Appendix C: Resolving the Match Report, for specific instructions and examples for how to resolve each individual Match error.

The Match Report runs assuming that the status structure code is the intended value and checks that the format of the record is consistent with the code. For example, if you close a library and used the correct STATSTRU = 03 but did not make the appropriate entries for the FSCSKEY and OLDID fields, the software will generate an error message.

The report displays information about the record, status code, and error messages. The error messages refer to problems with the format of a record based on the reported status code for the structure change. If the status code is incorrect, you simply have to change it to the correct code. Otherwise, you must adjust the AE or outlet information to match the status code.

You can correct information in your data file and import the revised file, or, for most problems, you can use the Structure Changes menu options under the Tools menu. However, you must fix problems with duplicate FSCS ID or OLDID information directly in the data file and import again.

The Restorable AE tab and the Restorable Outlet tab are for your reference. The Restorable AE tab provides a list of all closed, deleted, and temporarily closed entities for your state. Before you open a newly created AE (birth), structure code 02, you should check this tab to make sure the AE you are trying to create is truly new, meaning the AE was not previously reported, then either closed, deleted, or temporarily closed. This preserves the historical and longitudinal record for your state. This also applies for the Restorable Outlet tab.

HINT: Name and address changes can generate the largest number of error messages. You can run the Match Report and then decide how best to make corrections. For example, if you find that you are getting messages because all the current year address fields are incorrect, you might want to copy the prior year addresses to the current year file and import the revised file. However, if you need to change the status code for only a few records, you can simply use the Input pages.

6 Edit Report

Once you have completed a successful Match you must run the Edit Report by selecting Reports then Run Edit Report.

The report is displayed in an Excel workbook with multiple worksheets and is not linked to the PLS Web Portal. You must make changes to your data through the data input options or through an updated import file. (Please note that, if you import a corrected file, you will have to run the Match Report again.)

NOTE: You must save the Edit Report, record and save your annotation(s) in the workbook, and import the revised version into the PLS Web Portal.

You can select one of two sort orders for the Edit Report from the browser window: Sort by Edit Number by FSCS ID or Edit Number by Annotation Status by FSCS ID from the Tools/User Options menu.

It is necessary to provide an explanation for noncritical and internal edits. The annotations that accompany your Edit Report are an essential part of your submission because they provide verification and explanations for data that are correct but have been flagged with a noncritical edit. You must have at least one of each noncritical or internal edit annotated before you can complete your submission. If you make data changes or add annotations, you must rerun the Match Report and Edit Report before you can lock your submission.

6.1 Edit Messages and Conditions

The full list of edit conditions is published on the IMLS website (https://www.imls.gov/research-evaluation/surveys-data/public-libraries-survey/report-your-pls-data/fy-2019-pls-data), and the edit messages are also listed in the Help menu of the Web Portal. The following lists summarize the types of edits within the three broad categories of edits: critical, noncritical, and internal.

6.1.1 Critical Edits

Critical edits must be resolved before you can lock your submission:

Any -2 value
Zero or -1 in any population data element
Invalid categorical or date values
The state population is less than the unduplicated population
Name or address of library or outlet is not reported
Number of service outlets is not reported
Discrepancies between the number of outlets reported on the AE record and its outlet records
A subset item is greater than the total (e.g., Total Circulation is less than Circulation of Children’s Materials)
Any occurrence where fully reported detail data do not equal the reported total

6.1.2 Noncritical and Internal Edits

Noncritical and internal edits must be annotated before you can lock your submission. Both noncritical and internal edits are further categorized into current and historical edits.

Current edits identify possible errors in current year data:

Reporting patterns for data elements with detail items where not all items are reported (e.g., Total Librarians and Total Staff are reported as equal but Other Paid Employees is -1)
Inter-item comparison ratios (e.g., Total Circulation to Annual Visits)
Logical (e.g., Total Programs is zero but Program Attendance is not zero)
Magnitude (e.g., Databases is greater than 1,000)
Definitional (e.g., Print Materials is zero)

Historical edits identify possible errors in the current year (CY) data by comparing to prior year (PY) data:

PY was -1, and CY is zero
PY was -1, and CY is 1
PY was greater than a calculated value, and CY is zero
CY is greater than a calculated value, and PY was zero
CY and PY have the same value

CY to PY ratio is outside a specified range

6.2 Annotations

Annotations are stored in the PLS Web Portal database and are applied to the edits when you run the Edit Report.

You can upload your Annotation File into the PLS Web Portal through the Import Data option under the Tools menu in the following formats (see Annotation Import File Specifications in Appendix D):

A comma delimited text file (.csv)
Fixed length text file (.txt)
Excel file (.xls and .xlsx)

If you need to make more annotations after the files have been uploaded, you can upload again through the Edit Report. Save the Excel file generated by running the Edit Report, record your annotations, and re-upload the revised version.

Only annotations associated with individual edits will display in the Edit Report. If you have a general explanation that applies to several libraries, you must copy that explanation into the annotations column for each record to which it applies.

7 Lock Data

The Lock Data page is located under the Tools menu. You must verify that you want to lock your data.

Remember to review the Tables under the Reports option to check for any large statewide discrepancies before locking your data.

The following conditions must be met to lock your data:

No critical edits are found when the Edit Report runs.
For noncritical edits flagged, at least one annotation is present per edit check.
You can perform the following actions after locking your PLS data:

View Survey Status
Export data
View the completed survey form
Run tables
View help documents
Access external links
Log out

Once locked, the application does not allow the respondent to change any data, import files, run the Match Report, or run the Edit Report. If you lock your data and need to revise the locked data, please contact AIR at [email protected] or 1-866-744-5746, option 1.

7.1 Estimate of Burden

After locking your data, you must provide the estimated number of hours it took for you to complete the survey. The estimated number of hours should include the time to review instructions, search existing data resources, gather the data needed, and complete and review information collected. Your burden estimate may also include the following:

Preparing for the data submission (revising worksheets and, if you are a Bibliostat or Counting Opinions state, submitting to and testing the PLS Web Portal)
Vetting data submissions of individual libraries
Readying data for submission to AIR and contacting libraries, as needed, with questions
Submitting data through the PLS Web Portal
Responding to post-submittal edit questions (includes all time spent interacting with the PLS Web Portal and AIR during this phase)

Exhibit 7.1 PLS Web Portal Lock Data Confirmation Page

8 Chief Officer Certification

The role of the CO is to review and certify the data after the survey is locked and has gone through a post-lock review. The CO will receive login credentials for the PLS Web Portal via e-mail shortly after the start of data collection (usually early to mid-January).

After the survey is locked and the post-lock review completed, an e-mail will be sent to inform your CO that the data are ready for review and certification (SDCs will be copied on this e-mail). When your CO completes the certification process, another automated e-mail will be sent to the SDC and the CO confirming the PLS data have been certified.

8.1 Chief Officer Web Instructions

View Data

As the Chief Officer you are able to view your states’ Public Libraries Survey (PLS) before and after the SDC locks the data. Below are brief instructions on how to navigate the PLS Web Portal. For more details about the PLS Web Portal please see the User’s Guide under the Helpful Documents on the Home screen.

To view the status of the survey:

Select Survey Status in the dark green navigation panel
- Here you will be able to see where the SDC is in the process of the survey

To view State Characteristics, AE, and Outlet Data:

Select Tools in the dark green navigation panel
Select from the drop down the data you would like to view (State Char; AE; Outlet)

To export data:

Select Tools in the dark green navigation panel
Select Export Data from the dropdown menu
- Select the file format and data set you would like to export then select Generate File Export or;
- Select Export All Datasets – 1 Excel File to have all the current year and prior year data in one file

To download the Match Report:

Select Reports in the dark green navigation panel
Select View Match Report from the dropdown menu
Select Download Match Report
View and save the Match Report for your records

To download the Edit Report:

Select Reports in the dark green navigation panel
Select View Edit Report from the dropdown menu
Select Download Edit Report
- Note if you get an error saying, "A successful Match Report is required for the current year data," it means the SDC has not run a successful Match Report yet and has not yet run their Edit Report.
View and save the Edit Report for your records

To download the Tables Report:

Select Reports in the dark green navigation bar
Select View Tables from the dropdown menu
Select Download Tables Report
View and save the Tables Report for your records

Certify Data

Once you have received an e-mail from the PLS team alerting you that your state’s data have been locked and the post-lock review is complete you can certify your data.

To certify your state’s data follow these steps:

Login into the PLS Web Portal at https://submitpls.imls.gov
Navigate to the top right of the screen and click "Certify Data"
Review the PLS Certification Form
Click the "Certify" button
Sign the PLS Certification Form by entering your PLS Web Portal password
Click the "Confirm Certification" button
Once you have signed the form you and your state’s SDC will receive an e-mail indicating that the data have been certified. The email will include the text from the completed PLS Certification Form.

Appendix A Survey Instrument

Data Entry Screens and Data Element Definitions

State Characteristics Page

Administrative Entity –— Name/Addresses

Administrative Entity –— Other Identification

Administrative Entity –— Population/Outlets/Staff

Administrative Entity –— Operating Revenue

Administrative Entity –— Operating Expenditures

Administrative Entity –— Capital

Administrative Entity –— Library Collections

Administrative Entity –— Service Measures

Administrative Entity –— Programs/Other Electronic

Administrative Entity—Associated Outlet(s) Page

State Characteristics Data Element Definitions

Note: The following items are answered by the state library agency.

#	Data Element Name (Variable Name)	Data Element Definition
100	Reporting Period Starting Date (STARTDAT)	This is the earliest date (month and year) for a 12-month period that applies to the state’s data being submitted to IMLS. Note: Reporting period means data for the fiscal year that ended in the previous calendar year. If data are collected for different local reporting periods, provide the earliest starting date.
101	Reporting Period Ending Date (ENDDATE)	This is the latest date (month and year) for a 12-month period that applies to the state’s data being submitted to IMLS. Note: Reporting period means data for the fiscal year that ended in the previous calendar year. If data are collected for different local reporting periods, provide the latest ending date.
102	State Total Population Estimate (POPU_ST)	This is the most recent total population figure for your state that matches the local population figures that you are submitting to IMLS. The State Data Coordinator should obtain this figure annually from the State Data Center or other state sources.
103	Total Unduplicated Population of Legal Service Areas (POPU_UND)	This is the total unduplicated population of those areas in your state that receive library services. The population of unserved areas is not included in this figure. Note: A state’s actual total population of legal service areas may be different from the total population of legal service areas as calculated by PLS Web Portal. This happens in states where there are overlaps in population of legal service areas served by individual libraries, resulting in the same population being counted twice in the PLS Web Portal calculation. For states that have no overlapping jurisdictions, this number will be identical to your state’s total population of legal service areas as calculated by PLS Web Portal. For states that do have overlaps in population of legal service areas served by individual libraries, this number must be calculated separately. Use your state’s most recent state population figures for jurisdictions in your state as the basis for calculating the total unduplicated population of legal service areas.

Administrative Entity Data Element Definitions

Administrative Entity. (This is not a PLS Web Portal Data Element.) This is the agency that is legally established under local or state law to provide public library service to the population of a local jurisdiction. The administrative entity may have a single outlet, or it may have more than one outlet.

#	Data Element Name (Variable Name)	Data Element Definition
150	FSCS ID (Automatic Display) (FSCSKEY)	This is the identification code assigned by PLS Web Portal to the administrative entity.
150a	Structure Status (STATSTRU)	This is the Structure Change Code to record actions such as adding, deleting, or merging.
151	LIB ID (LIBID)	This is the state-assigned identification code for the administrative entity.
152	Name (LIBNAME)	This is the legal name of the administrative entity. Note: Provide the name of the public library. Do not use acronyms. Do not abbreviate the name unless it exceeds the PLS Web Portal field length of 60 characters. Avoid abbreviations at the beginning of the name and do not punctuate abbreviations. (See Standard Abbreviations for PLS Web Portal in Appendix G.)
152a	Name Status (STATNAME)	This is the Name Change Code to identify whether the change is an official name change.
Street Address
153	Street Address (ADDRESS)	This is the complete street address of the administrative entity. Note: Do not report a post office box or general delivery.
153a	Address Status (STATADDR)	This is the Address Change Code to identify whether the address change is an actual location change.
154	City (of street address) (CITY)	This is the city or town in which the administrative entity is located.
155	ZIP Code (of street address) (ZIP)	This is the standard five-digit postal zip code for the street address of the administrative entity.
Mailing Address
157	Mailing Address (ADDRES_M)	This is the mailing address of the administrative entity.
158	City (of mailing address) (CITY_M)	This is the city or town of the mailing address for the administrative entity.
159	ZIP Code (of mailing address) (ZIP_M)	This is the standard five-digit postal ZIP code for the mailing address of the administrative entity.
161	County of the Entity (CNTY)	This is the county in which the headquarters of the administrative entity is physically located.
162	Phone (PHONE)	This is the telephone number of the administrative entity, including area code. Note: Report telephone number without spacing or punctuation. If the Administrative Entity has no phone, enter -3 (for Not Applicable).
200	Interlibrary Relationship Code (C_RELATN)	Select one of the following: HQ—Headquarters of a Federation or Cooperative. The library or entity that provides the physical space and staff who manage, coordinate, or administer the programs of the federation or cooperative. Note: Agencies that serve other libraries rather than the public should not be reported to FSCS. ME—Member of a Federation or Cooperative. An autonomous library joined by formal or informal agreement(s) with (a) other autonomous libraries in the same state to perform various services cooperatively, such as resource sharing, communications, etc., and (b) libraries that are part of national, multi-state or statewide library federations or cooperatives. (Do not include OCLC.) Do not include multiple outlet administrative entities (e.g., libraries with branches and that have the word “system” in their legal name) if the entity does not have an agreement with another autonomous library. NO—Not a Member of a Federation or Cooperative.
201	Legal Basis Code (C_LEGBAS)	The legal basis is the type of local government structure within which the entity functions. It reflects the state or local law, which authorizes the library. Select one of the following: CC—City/County. A multi-jurisdictional entity that is operated jointly by a county and a city. CI—Municipal Government (city, town or village). A municipal government is an organized local government authorized in a state’s constitution and statutes and established to provide general government for a specific concentration of population in a defined area. CO—County/Parish. An organized local government authorized in a state’s constitution and statutes and established to provide general government. LD—Library District. A library district is a local entity other than a county, municipality, township, or school district that is authorized by state law to establish and operate a public library as defined by FSCS. It has sufficient administrative and fiscal autonomy to qualify as a separate government. Fiscal autonomy requires support from local taxation dedicated to library purposes (e.g., a library tax). MJ—Multi-jurisdictional. An entity operated jointly by two or more units of local government under an intergovernmental agreement which creates a jointly appointed board or similar means of joint governance; to be distinguished from a library which contracts to serve other jurisdictions and from special library districts. Note: Please put city/county combinations under ‘CC’, rather than under Multi-jurisdictional. NL—Native American Tribal Government. An organized local government authorized and established to provide general government to residents of a Native American reservation. Note: Include native Alaskan villages in this category. NP—Nonprofit Association or Agency. An entity privately controlled but meeting the statutory definition of a public library in a given state; includes association libraries and libraries with 501(c) designation. SD—School District. An organized local entity providing public elementary, secondary, and/or higher education, which under state law, has sufficient administrative and fiscal autonomy to qualify as a separate government. Excludes “dependent public school systems” of county, municipal, township, or state governments. OT—Other.
202	Administrative Structure Code (C_ADMIN)	This code identifies an autonomous library entity (administrative entity) that has its own governance and funding. An administrative entity is the agency that is legally established under local or state law to provide public library service to the population of a local jurisdiction. The administrative entity may have a single outlet, or it may have more than one outlet. Select one of the following: MA—Administrative Entity with Multiple Direct Service Outlets where Administrative Offices are separate. An administrative entity that serves the public directly with two or more service outlets, including some combination of one central library, branch(es), bookmobile(s), and/or books-by mail only. The administrative offices are separate from the direct service outlets and do not provide direct library services. MO—Administrative Entity with Multiple Direct Service Outlets where Administrative Offices are Not Separate. An administrative entity that serves the public directly with two or more service outlets, including some combination of one central library, branch(es), bookmobile(s), and/or books-by mail only. SO—Administrative Entity with a Single Direct Service Outlet. An administrative entity that serves the public directly with one central library, books-by-mail only, or one bookmobile.
203	FSCS Public Library Definition (C_FSCS)	Answer <Y>es or <N>o to the following question: “Does this public library meet all the criteria of the FSCS public library definition?” A public library is an entity that is established under state enabling laws or regulations to serve a community, district, or region, and that provides at least the following: 1. An organized collection of printed or other library materials, or a combination thereof; 2. Paid staff; 3. An established schedule in which services of the staff are available to the public; 4. The facilities necessary to support such a collection, staff, and schedule; and 5. Is supported in whole or in part with public funds. Note: If the library meets all of the requirements of this definition, respond with a <Y>es. If the library does not meet one or more of the requirements, respond with a <N>o.
204	Geographic Code (GEOCODE)	Choose from among the following types of readily available Census geography, one code that either exactly or most nearly describes the geographic area for which the public library has been established to offer services and from which (or on behalf of which) the library derives revenue, plus any areas served under contract for which the library is the primary service provider. Note: The Population of Legal Service Area (data element #208) should be reflected in the geographic code selected. For further clarification of municipal government, county/parish, and school district, refer to definitions under Legal Basis Code (data element #201). CI1—Municipal Government (city, town or village) (exactly) CI2—Municipal Government (city, town or village) (most nearly) CO1—County/Parish (exactly) CO2—County/Parish (most nearly) MA1—Metropolitan Area (exactly) MA2—Metropolitan Area (most nearly) MC1—Multi-County (exactly) MC2—Multi-County (most nearly) SD1—School District (exactly) SD2—School District (most nearly) OTH—Other
205	Legal Service Area Boundary Change (LSABOUND)	Answer <Y>es or <N>o to the following question: “Did the administrative entity’s legal service area boundaries change since last year?” Note: Changes are likely to result, for example, when a municipality annexes land, when one municipality in a county becomes either an independent city or its own county necessitating its exclusion from the first county’s geography, or when an administrative entity contracts to provide public library service for some additional geographic area other than the geographic area for which it was established (e.g., a municipal library contracts to serve county residents).
206	Reporting Period Starting Date (STARTDAT)	This is the starting date (month, day, and year) for a 12-month period that applies to the administrative entity’s data being submitted to IMLS. Note: Reporting period means data for the fiscal year that ended in the previous calendar year.
207	Reporting Period Ending Date (ENDDATE)	This is the ending date (month, day, and year) for a 12-month period that applies to the administrative entity’s data being submitted to IMLS. Note: Reporting period means data for the fiscal year that ended in the previous calendar year.
208	Population of the Legal Service Area (POPU_LSA)	The number of people in the geographic area for which a public library has been established to offer services and from which (or on behalf of which) the library derives revenue, plus any areas served under contract for which the library is the primary service provider. Note: The determination of this population figure shall be the responsibility of the state library agency. This population figure should be based on the most recent state population figures for jurisdictions in your state available from the State Data Center. The State Data Coordinator should obtain these figures annually from the State Data Center or other state sources.
209	Number of Central Libraries (CENTLIB)	This is one type of single outlet library (SO) or the library, which is the operational center of a multiple-outlet library (MO or MA). Usually all processing is centralized here and the principal collections are housed here. Synonymous with main library. Note: Each administrative entity may report either no central library or one central library. No administrative entity may report more than one central library. In the administrative entity file, this simply means reporting “0” or “1” for central library. Where two or more libraries are considered “centrals” for state or local purposes, one central library and one or more branch libraries should be reported to FSCS. If you wish to identify a central library in the outlet file, identify the library with the largest collection as the central library for FSCS purposes, and report all others as branches. Where there are several co-equal outlets and no principal collection, report all such outlets as branches, not central libraries.
210	Number of Branch Libraries (BRANLIB)	A branch library is an auxiliary unit of an administrative entity which has at least all of the following: Separate quarters; An organized collection of library materials; Paid staff; and Regularly scheduled hours for being open to the public.
211	Number of Bookmobiles (BKMOB)	A bookmobile is a traveling branch library. It consists of at least all of the following: A truck or van that carries an organized collection of library materials; Paid staff; and Regularly scheduled hours (bookmobile stops) for being open to the public. Note: Count the number of vehicles in use, not the number of stops the vehicle makes.

PAID STAFF (FULL-TIME EQUIVALENT)

Report figures as of the last day of the fiscal year. Include all positions funded in the library’s budget whether those positions are filled or not. To ensure comparable data, 40 hours per week has been set as the measure of full-time employment (FTE). For example, 60 hours per week of part-time work by employees in a staff category divided by the 40-hour measure equals 1.50 FTEs.

#	Data Element Name (Variable Name)	Data Element Definition
250	ALA-MLS Librarians (MASTER)	Librarians with master’s degrees from programs of library and information studies accredited by the American Library Association.
251	Total Librarians (LIBRARIA)	Persons with the title of librarian who do paid work that usually requires professional training and skill in the theoretical or scientific aspects of library work, or both, as distinct from its mechanical or clerical aspect. This data element also includes ALA-MLS (data element #250).
252	All Other Paid Staff (OTHPAID)	This includes all other FTE employees paid from the reporting unit budget, including plant operations, security, and maintenance staff.
253	Total Paid Employees (TOTSTAFF)	This is the sum of Total Librarians and All Other Paid Staff (data elements #251 and #252).

OPERATING REVENUE

Report revenue used for operating expenditures as defined below. Include federal, state, local, or other grants. DO NOT include revenue for major capital expenditures, contributions to endowments, revenue passed through to another agency (e.g., fines), or funds unspent in the previous fiscal year (e.g., carryover). (Funds transferred from one public library to another public library should be reported by only one of the public libraries. The State Data Coordinator shall determine which library will report these funds.)

#	Data Element Name (Variable Name)	Data Element Definition
300	Local Government Revenue (LOCGVT)	This includes all local government funds designated by the community, district, or region and available for expenditure by the public library. Do not include the value of any contributed or in-kind services or the value of any gifts and donations, library fines, fees, or grants. Do not include state, federal, and other funds passed through local government for library use. Report these funds with state government revenue or federal government revenue, as appropriate. Note: Significant funding provided by other local government agencies with the authority to levy taxes “on behalf of” the library should be included if the information is available to the reporting agency and if such funds are supported by documentation (such as certified budgets, payroll records, etc.)
301	State Government Revenue (STGVT)	These are all funds distributed to public libraries by state government for expenditure by the public libraries, except for federal money distributed by the state. This includes funds from such sources as penal fines, license fees, and mineral rights. Note: If operating revenue from consolidated taxes is the result of state legislation, the revenue should be reported under state revenue (even though the revenue may be from multiple sources).
302	Federal Government Revenue (FEDGVT)	This includes all federal government funds distributed to public libraries for expenditure by the public libraries, including federal money distributed by the state.
303	Other Operating Revenue (OTHINCM)	This is all operating revenue other than that reported under local, state, and federal (data elements #300, #301, and #302). Include, for example, monetary gifts and donations received in the current year, interest, library fines, fees for library services, or grants. Do not include the value of any contributed or in-kind services or the value of any nonmonetary gifts and donations.
304	Total Operating Revenue (TOTINCM)	This is the sum of Local Government Revenue, State Government Revenue, Federal Government Revenue, and Other Operating Revenue (data elements #300 through #303).

OPERATING EXPENDITURES

Operating expenditures are the current and recurrent costs necessary to support the provision of library services. Significant costs, especially benefits and salaries, that are paid by other taxing agencies (government agencies with the authority to levy taxes) “on behalf of” the library may be included if the information is available to the reporting agency. Only such funds that are supported by expenditure documents (such as invoices, contracts, payroll records, etc.) at the point of disbursement should be included. Do not report the value of free items as expenditures. Do not report estimated costs as expenditures. Do not report capital expenditures under this category.

Staff Expenditures
#	Data Element Name (Variable Name)	Data Element Definition
350	Salaries & Wages Expenditures (SALARIES)	This includes salaries and wages for all library staff (including plant operations, security, and maintenance staff) for the fiscal year. Include salaries and wages before deductions but exclude employee benefits.
351	Employee Benefits Expenditures (BENEFIT)	These are the benefits outside of salaries and wages paid and accruing to employees (including plant operations, security, and maintenance staff), regardless of whether the benefits or equivalent cash options are available to all employees. Include amounts for direct paid employee benefits including Social Security, retirement, medical insurance, life insurance, guaranteed disability income protection, unemployment compensation, workmen’s compensation, tuition, and housing benefits
352	Total Staff Expenditures (STAFFEXP)	This is the sum of Salaries & Wages Expenditures and Employee Benefits Expenditures (data elements #350 and #351).
Collection Expenditures This includes all operating expenditures from the library budget for all materials in print, microform, electronic, and other formats considered part of the collection, whether purchased, leased, or licensed. Exclude charges or fees for interlibrary loans and expenditures for document delivery.
#	Data Element Name (Variable Name)	Data Element Definition
353	Print Materials Expenditures (PRMATEXP)	Report all operating expenditures for the following print materials: books, current serial subscriptions, government documents, and any other print acquisitions.
354	Electronic Materials Expenditures (ELMATEXP)	Report all operating expenditures for electronic (digital) materials. Types of electronic materials include e-books, audio and video downloadables, e-serials (including journals), government documents, databases (including locally mounted, full text or not), electronic files, reference tools, scores, maps, or pictures in electronic or digital format, including materials digitized by the library. Electronic materials can be distributed on magnetic tape, diskettes, computer software, CD-ROM, or other portable digital carrier, and can be accessed via a computer, via access to the Internet, or by using an e-book reader. Include expenditures for materials held locally and for remote materials for which permanent or temporary access rights have been acquired. Include expenditures for database licenses. [Note: Based on ISO 2789 definition.] Note: Expenditures for computer software used to support library operations or to link to external networks, including the Internet, are reported under Other Operating Expenditures (data element #357).
355	Other Materials Expenditures (OTHMATEX)	Report all operating expenditures for other materials, such as microform, audio and video physical units, DVD, and materials in new formats.
356	Total Collection Expenditures (TOTEXPCO)	This is the sum of Print Materials Expenditures, Electronic Materials Expenditures, and Other Materials Expenditures (data elements #353, #354, and #355).


#	Data Element Name (Variable Name)	Data Element Definition
357	Other Operating Expenditures (OTHOPEXP)	This includes all expenditures other than those reported for Total Staff Expenditures (data element #352) and Total Collection Expenditures (data element #356). Note: Include expenses such as binding, supplies, repair or replacement of existing furnishings and equipment; and costs of computer hardware and software used to support library operations or to link to external networks, including the Internet. Report contracts for services, such as costs of operating and maintaining physical facilities, and fees paid to a consultant, auditor, architect, attorney, etc.
358	Total Operating Expenditures (TOTOPEXP)	This is the sum of Total Staff Expenditures, Total Collection Expenditures, and Other Operating Expenditures (data elements #352, #356, and #357).

CAPITAL REVENUE

Report all revenue to be used for major capital expenditures, by source of revenue. Include funds received for (a) site acquisition; (b) new buildings; (c) additions to or renovation of library buildings; (d) furnishings, equipment, and initial collections (print, nonprint, and electronic) for new buildings, building additions, or building renovations; (e) computer hardware and software used to support library operations, to link to networks, or to run information products; (f) new vehicles; and (g) other one-time major projects. Exclude revenue to be used for replacement and repair of existing furnishings and equipment, regular purchase of library materials, and investments for capital appreciation. Exclude income passed through to another agency (e.g., fines), or funds unspent in the previous fiscal year (e.g., carryover). Funds transferred from one public library to another public library should be reported by only one of the public libraries. Report federal, state, local, and other revenue to be used for major capital expenditures in the following categories:

#	Data Element Name (Variable Name)	Data Element Definition
400	Local Government Capital Revenue (LCAP_REV)	Report all governmental funds designated by the community, district, or region and available to the public library for the purpose of major capital expenditures, except for state and/or federal money distributed by the local government.
401	State Government Capital Revenue (SCAP_REV)	Report all funds distributed to public libraries by state government for expenditure by the public libraries for the purpose of major capital expenditures, except for federal money distributed by the state.
402	Federal Government Capital Revenue (FCAP_REV)	Report federal governmental funds, including federal funds distributed by the state or locality, and grants and aid received by the library for the purpose of major capital expenditures.
403	Other Capital Revenue (OCAP_REV)	Report private (nongovernmental funds), including grants received by the library for the purpose of major capital expenditures.
404	Total Capital Revenue (CAP_REV)	This is the sum of Local Government Capital Revenue, State Government Capital Revenue, Federal Government Capital Revenue, and Other Capital Revenue (data elements #400 through #403). Note: The amounts reported for Total Capital Revenue and Total Capital Expenditures are not expected to be equal.

CAPITAL EXPENDITURES

#	Data Element Name (Variable Name)	Data Element Definition
405	Total Capital Expenditures (CAPITAL)	Report major capital expenditures (the acquisition of or additions to fixed assets). Examples include expenditures for (a) site acquisitions; (b) new buildings; (c) additions to or renovation of library buildings; (d) furnishings, equipment, and initial book stock for new buildings, building additions, or building renovations; (e) library automation systems; (f) new vehicles; and (g) other one-time major projects. Include federal, state, local, or other revenue used for major capital expenditures. Only funds that are supported by expenditure documents (e.g., invoices, contracts, payroll records, etc.) at the point of disbursement should be included. Estimated costs are not included. Exclude expenditures for replacement and repair of existing furnishings and equipment, regular purchase of library materials, and investments for capital appreciation. Exclude contributions to endowments, or revenue passed through to another agency (e.g., fines). Funds transferred from one public library to another public library should be reported by only one of the public libraries.

Data Element Name (Variable Name)

Data Element Definition

405

Total Capital Expenditures

(CAPITAL)

Report major capital expenditures (the acquisition of or additions to fixed assets). Examples include expenditures for (a) site acquisitions; (b) new buildings; (c) additions to or renovation of library buildings; (d) furnishings, equipment, and initial book stock for new buildings, building additions, or building renovations; (e) library automation systems; (f) new vehicles; and (g) other one-time major projects. Include federal, state, local, or other revenue used for major capital expenditures. Only funds that are supported by expenditure documents (e.g., invoices, contracts, payroll records, etc.) at the point of disbursement should be included. Estimated costs are not included. Exclude expenditures for replacement and repair of existing furnishings and equipment, regular purchase of library materials, and investments for capital appreciation.

Exclude contributions to endowments, or revenue passed through to another agency (e.g., fines). Funds transferred from one public library to another public library should be reported by only one of the public libraries.

LIBRARY COLLECTION

This section of the survey (450-460) collects data on selected types of materials.

It does not cover all materials (i.e., microforms, loose sheet music, maps, and pictures) for which expenditures are reported under Print Materials Expenditures, Electronic Materials Expenditures, and Other Materials Expenditures (data elements #353, #354, and #355). Under this category report only items that have been purchased, leased or licensed by the library, a consortium, the state library, a donor or other person or entity. Included items must only be accessible with a valid library card or at a physical library location; inclusion in the catalog is not required. Do not include items freely available without monetary exchange. Do not include items that are permanently retained by the patron; count only items that have a set circulation period where it is available for their use. Count electronic materials at the administrative entity level; do not duplicate numbers at each branch.

#	Data Element Name (Variable Name)	Data Element Definition
450	Print Materials (BKVOL)	Report a single figure that includes the following: Books in print. Books are non-serial printed publications (including music scores or other bound forms of printed music, and maps) that are bound in hard or soft covers, or in loose-leaf format. Do not include unbound sheet music. Include non-serial government documents. Report the number of physical units, including duplicates. For smaller libraries, if volume data are not available, count the number of titles. Books packaged together as a unit (e.g., a 2-volume set) and checked out as a unit are counted as one physical unit.
451	Electronic Books – EBooks (EBOOK)	E-books are digital documents (including those digitized by the library), licensed or not, where searchable text is prevalent, and which can be seen in analogy to a printed book (monograph). E-books are loaned to users on portable devices (e-book readers) or by transmitting the contents to the user’s personal computer for a limited time. Include e-books held locally and remote e-books for which permanent or temporary access rights have been acquired. Report the number of electronic units, including duplicates, at the administrative entity level; do not duplicate unit count for each branch. E-books packaged together as a unit (e.g., multiple titles on a single e-book reader) and checked out as a unit are counted as one unit. Report the number of units. Report only items that have been purchased, leased or licensed by the library, a consortium, the state library, a donor or other person or entity. Included items must only be accessible with a valid library card or at a physical library location; inclusion in the catalog is not required. Do not include items freely available without monetary exchange. Do not include items that are permanently retained by the patron; count only items that have a set circulation period where it is available for their use. Count electronic materials at the administrative entity level; do not duplicate numbers at each branch. NOTE: For purposes of this survey, units are defined as “units of acquisition or purchase.” The “unit” is determined by considering whether the item is restricted to a finite number of simultaneous users or an unlimited number of simultaneous users. Finite simultaneous use: units of acquisition or purchase is based on the number of simultaneous usages acquired (equivalent to purchasing multiple copies of a single title). For example, if a library acquires a title with rights to a single user at a time, then that item is counted as 1 “unit”; if the library acquires rights to a single title for 10 simultaneous users, then that item is counted as 10 “units.” For smaller libraries, if volume data are not available, the number of titles may be counted. Unlimited simultaneous use: units of acquisition or purchase is based on the number of titles acquired. For example, if a library acquires a collection of 100 books with unlimited simultaneous users, then that collection would be counted as 100 “units.”
452	Audio – physical units (AUDIO_PH)	These are materials circulated in a fixed, physical format on which sounds (only) are stored (recorded) and that can be reproduced (played back) mechanically, electronically, or both. Include records, audiocassettes, audio cartridges, audio discs (including audio-CD-ROMs), audio-reels, talking books, and other sound recordings stored in a fixed, physical format. Do not include downloadable electronic audio files. Report the number of units, including duplicates. Items packaged together as a unit (e.g. two audiocassettes for one recorded book) and checked out as a unit are counted as one physical unit.
453	Audio – downloadable units (AUDIO_DL)	These are downloadable electronic files on which sounds (only) are stored (recorded) and that can be reproduced (played back) electronically. Audio – Downloadable Units may be loaned to users on portable devices or by transmitting the contents to the user’s personal computer for a limited time. Include Audio – Downloadable Units held locally and remote Audio – Downloadable Units for which permanent or temporary access rights have been acquired. Report the number of units. Report only items that have been purchased, leased or licensed by the library, a consortium, the state library, a donor or other person or entity. Included items must only be accessible with a valid library card or at a physical library location; inclusion in the catalog is not required. Do not include items freely available without monetary exchange. Do not include items that are permanently retained by the patron; count only items that have a set circulation period where it is available for their use. Count electronic materials at the administrative entity level; do not duplicate numbers at each branch. NOTE: For purposes of this survey, units are defined as “units of acquisition or purchase.” The “unit” is determined by considering whether the item is restricted to a finite number of simultaneous users or an unlimited number of simultaneous users. Finite simultaneous use: units of acquisition or purchase is based on the number of simultaneous usages acquired (equivalent to purchasing multiple copies of a single title). For example, if a library acquires a title with rights to a single user at a time, then that item is counted as 1 “unit”; if the library acquires rights to a single title for 10 simultaneous users, then that item is counted as 10 “units. For smaller libraries, if volume data are not available, the number of titles may be counted. Unlimited simultaneous use: units of acquisition or purchase is based on the number of titles acquired. For example, if a library acquires a collection of 100 books with unlimited simultaneous users, then that collection would be counted as 100 “units.”
454	Video – physical units (VIDEO_PH)	These are materials circulated in a fixed, physical format on which moving pictures are recorded, with or without sound. Electronic playback reproduces pictures, with or without sound, using a television receiver or computer monitor. Video formats may include tape, DVD and CD-ROM. Do not include downloadable electronic video files. Report the number of units, including duplicates. Items packaged together as a unit (e.g., two DVDs for one movie) and checked out as a unit are counted as one physical unit.
455	Video – downloadable units (VIDEO_DL)	These are downloadable electronic files on which moving pictures are recorded, with or without sound. Electronic playback reproduces pictures, with or without sound, using a television receiver, computer monitor or video-enabled mobile device. Video – Downloadable Units may be loaned to users on portable devices or by transmitting the contents to the user’s personal computer for a limited time. Include Video – Downloadable Units held locally and remote Video – Downloadable Units for which permanent or temporary access rights have been acquired. Report the number of units. Report only items that have been purchased, leased or licensed by the library, a consortium, the state library, a donor or other person or entity. Included items must only be accessible with a valid library card or at a physical library location; inclusion in the catalog is not required. Do not include items freely available without monetary exchange. Do not include items that are permanently retained by the patron; count only items that have a set circulation period where it is available for their use. Count electronic materials at the administrative entity level; do not duplicate numbers at each branch. NOTE: For purposes of this survey, units are defined as “units of acquisition or purchase.” The “unit” is determined by considering whether the item is restricted to a finite number of simultaneous users or an unlimited number of simultaneous users. Finite simultaneous use: units of acquisition or purchase is based on the number of simultaneous usages acquired (equivalent to purchasing multiple copies of a single title). For example, if a library acquires a title with rights to a single user at a time, then that item is counted as 1 “unit”; if the library acquires rights to a single title for 10 simultaneous users, then that item is counted as 10 “units.” For smaller libraries, if volume data are not available, the number of titles may be counted. Unlimited simultaneous use: units of acquisition or purchase is based on the number of titles acquired. For example, if a library acquires a collection of 100 books with unlimited simultaneous users, then that collection would be counted as 100 “units.”

Data Element Name (Variable Name)

Data Element Definition

450

Print Materials

(BKVOL)

Report a single figure that includes the following:

Books in print. Books are non-serial printed publications (including music scores or other bound forms of printed music, and maps) that are bound in hard or soft covers, or in loose-leaf format. Do not include unbound sheet music. Include non-serial government documents. Report the number of physical units, including duplicates. For smaller libraries, if volume data are not available, count the number of titles. Books packaged together as a unit (e.g., a 2-volume set) and checked out as a unit are counted as one physical unit.

451

Electronic Books – EBooks

(EBOOK)

E-books are digital documents (including those digitized by the library), licensed or not, where searchable text is prevalent, and which can be seen in analogy to a printed book (monograph). E-books are loaned to users on portable devices (e-book readers) or by transmitting the contents to the user’s personal computer for a limited time. Include e-books held locally and remote e-books for which permanent or temporary access rights have been acquired. Report the number of electronic units, including duplicates, at the administrative entity level; do not duplicate unit count for each branch. E-books packaged together as a unit (e.g., multiple titles on a single e-book reader) and checked out as a unit are counted as one unit.

Report the number of units. Report only items that have been purchased, leased or licensed by the library, a consortium, the state library, a donor or other person or entity. Included items must only be accessible with a valid library card or at a physical library location; inclusion in the catalog is not required. Do not include items freely available without monetary exchange. Do not include items that are permanently retained by the patron; count only items that have a set circulation period where it is available for their use. Count electronic materials at the administrative entity level; do not duplicate numbers at each branch.

NOTE: For purposes of this survey, units are defined as “units of acquisition or purchase.” The “unit” is determined by considering whether the item is restricted

to a finite number of simultaneous users or an unlimited number of simultaneous users.

Finite simultaneous use: units of acquisition or purchase is based on the number of simultaneous usages acquired (equivalent to purchasing multiple copies of a single title). For example, if a library acquires a title with rights to a single user at a time, then that item is counted as 1 “unit”; if the library acquires rights to a single title for 10 simultaneous users, then that item is counted as 10 “units.” For smaller libraries, if volume data are not available, the number of titles may be counted.

Unlimited simultaneous use: units of acquisition or purchase is based on the number of titles acquired. For example, if a library acquires a collection of 100 books with unlimited simultaneous users, then that collection would be counted as 100 “units.”

452

Audio – physical units

(AUDIO_PH)

These are materials circulated in a fixed, physical format on which sounds (only) are stored (recorded) and that can be reproduced (played back) mechanically, electronically, or both. Include records, audiocassettes, audio cartridges, audio discs (including audio-CD-ROMs), audio-reels, talking books, and other sound recordings stored in a fixed, physical format. Do not include downloadable electronic audio files.

Report the number of units, including duplicates. Items packaged together as a unit (e.g. two audiocassettes for one recorded book) and checked out as a unit are counted as one physical unit.

453

Audio – downloadable

units

(AUDIO_DL)

These are downloadable electronic files on which sounds (only) are stored (recorded) and that can be reproduced (played back) electronically. Audio – Downloadable Units may be loaned to users on portable devices or by transmitting the contents to the user’s personal computer for a limited time. Include Audio – Downloadable Units held locally and remote Audio – Downloadable Units for which permanent or temporary access rights have been acquired.

NOTE: For purposes of this survey, units are defined as “units of acquisition or purchase.” The “unit” is determined by considering whether the item is restricted to a finite number of simultaneous users or an unlimited number of simultaneous users.

Finite simultaneous use: units of acquisition or purchase is based on the number of simultaneous usages acquired (equivalent to purchasing multiple copies of a single title). For example, if a library acquires a title with rights to a single user at a time, then that item is counted as 1 “unit”; if the library acquires rights to a single title for 10 simultaneous users, then that item is counted as 10 “units. For smaller libraries, if volume data are not available, the number of titles may be counted.

454

Video – physical units

(VIDEO_PH)

These are materials circulated in a fixed, physical format on which moving pictures are recorded, with or without sound.

Electronic playback reproduces pictures, with or without sound, using a television receiver or computer monitor. Video formats may include tape, DVD and CD-ROM. Do not include downloadable electronic video files.

Report the number of units, including duplicates. Items packaged together as a unit (e.g., two DVDs for one movie) and checked out as a unit are counted as one physical unit.

455

Video – downloadable

units

(VIDEO_DL)

These are downloadable electronic files on which moving pictures are recorded, with or without sound. Electronic playback reproduces pictures, with or without sound, using a television receiver, computer monitor or video-enabled mobile device. Video – Downloadable Units may be loaned to users on portable devices or by transmitting the contents to the user’s personal computer for a limited time. Include Video – Downloadable Units held locally
and remote Video – Downloadable Units for which permanent or temporary access rights have been acquired.

NOTE: For purposes of this survey, units are defined as “units of acquisition or purchase.” The “unit” is determined by considering whether the item is restricted to a finite number of simultaneous users or an unlimited number of simultaneous users.

Electronic Collections

Report the number of electronic collections.

An electronic collection is a collection of electronically stored data or unit records (facts, bibliographic data, abstracts, texts, photographs, music, video, etc.) with a common user interface and software for the retrieval and use of the data. An electronic collection may be organized, curated and electronically shared by the library, or rights may be provided by a third party vendor. An electronic collection may be funded by the library, or provided through cooperative agreement with other libraries, or through the State Library. Do not include electronic collections that are provided by third parties and freely linked to on the Web.

Electronic Collections do not have a circulation period and may be retained by the patron. Remote access to the collection may or may not require authentication. Unit records may or may not be included in the library’s catalog; the library may or may not select individual titles. Include electronic collections that are available online or are locally hosted in the library.

Note: The data or records are usually collected with a particular intent and relate to a defined topic.

Report the number of electronic collections acquired through curation, payment or formal agreement, by source of access:

#		Data Element Name (Variable Name)	Data Element Definition
456	Local/Other cooperative Agreements (EC_LO_OT)
457	State (state government or state library) (EC_ST)
458	Total Electronic Collections (ELECCOLL)		This is the sum of Local/Other cooperative agreements and State electronic collections (data elements #456 and #457).

SERVICES

#	Data Element Name (Variable Name)	Data Element Definition
501	Library Visits (VISITS)	This is the total number of persons entering the library for whatever purpose during the year. Note: If an actual count of visits is unavailable, determine an annual estimate by counting visits during a typical week in October and multiplying the count by 52. A “typical week” is a time that is neither unusually busy nor unusually slow. Avoid holiday times, vacation periods for key staff, or days when unusual events are taking place in the community or the library. Choose a week in which the library is open its regular hours. Include seven consecutive calendar days, from Sunday through Saturday (or whenever the library is usually open).
501a	Library Visits Reporting Method (VISITRPT)	Regarding the number of Library Visits (data element #501) entered, is this an annual count or an annual estimate based on a typical week or weeks? Select one of the following: CT—Annual Count ES—Annual Estimate Based on Typical Week(s)
502	Reference Transactions (REFERENC)	Reference Transactions are information consultations in which library staff recommend, interpret, evaluate, and/or use information resources to help others to meet particular information needs. Reference transactions do not include formal instruction or exchanges that provide assistance with locations, schedules, equipment, supplies, or policy statements. NOTES: A reference transaction includes information and referral service, unscheduled individual instruction and assistance in using information sources (including websites and computer-assisted instruction). Count Readers Advisory questions as reference transactions. Information sources include (a) printed and nonprinted material; (b) machine-readable databases (including computer-assisted instruction); (c) the library’s own catalogs and other holdings records; (d) other libraries and institutions through communication or referral; and (e) persons both inside and outside the library. When a staff member uses information gained from previous use of information sources to answer a question, the transaction is reported as a reference transaction even if the source is not consulted again. If a contact includes both reference and directional services, it should be reported as one reference transaction. Duration should not be an element in determining whether a transaction is a reference transaction. Do not include transactions that include only a directional service, such as instruction for locating staff, library users, or physical features within the library. Examples of directional transactions include, “Where is the reference librarian? Where is Susan Smith? Where is the rest room? Where are the 600s? Can you help me make a photocopy?” Annual Count vs. Annual Estimate If an annual count of reference transactions is unavailable, count reference transactions during a typical week or weeks, and multiply the count to represent an annual estimate. A “typical week” is a time that is neither unusually busy nor unusually slow. Avoid holiday times, vacation periods for key staff, or days when unusual events are taking place in the community or in the library. Choose a week in which the library is open its regular hours. Example: If there are four weeks sampled, multiply the totals for those four weeks by 13 to get an estimate for the full year. If the sample is done twice a year (one week at each time, two weeks total) multiply the count by 26 to get the estimated annual count.
502a	Reference Transactions Reporting Method (REFERRPT)	Regarding the number of Reference Transactions (data element #502) entered, is this an annual count or an annual estimate based on a typical week or weeks? Select one of the following: CT—Annual Count ES—Annual Estimate Based on Typical Week(s)
503	Number of Registered Users (REGBOR)	A registered user is a library user who has applied for and received an identification number or card from the public library that has established conditions under which the user may borrow library materials or gain access to other library resources. Note: Files should have been purged within the past three (3) years.
510	Closed Outlets Due to COVID-19 (C19CLOSE)	Answer <Y>es or <N>o to the following question: “Were any of the library’s outlets physically closed to the public for any period of time due to the Coronavirus (COVID-19) pandemic?” NOTE: An outlet is considered physically closed when the public cannot access any library buildings or bookmobiles, regardless of staff access. A building can be physically closed but still offer virtual, Wi-Fi, or “curbside” services outside the building.
511	Public Services During COVID-19 (C19PUBSV)	Answer <Y>es or <N>o to the following question: “Did library staff continue to provide services to the public during any portion of the period when the building was physically closed to the public due to the Coronavirus (COVID-19) pandemic?” NOTE: Services to the public can include activities such as answering calls, emails, or texts with answers to information requests from the public; hosting virtual programming or recorded content; offering “curbside,” delivery (mail or drop-off), or drive-thru circulation of physical materials; managing IT services to ensure external Wi-Fi access; and providing other types of online and electronic services, regardless of the location of library staff when they provided services (i.e., working from home or in the building that was closed to the public).
512	Electronic Materials Added Due to COVID-19 (C19ELMAT)	Answer <Y>es or <N>o to the following question: “Did the library add or increase access to electronic collection materials due to the Coronavirus (COVID-19) pandemic?” NOTE: Adding or increasing materials can include increasing the concurrent or monthly borrowing limits for electronic materials, increasing the number of electronic materials and holdings, or otherwise augmenting the public’s ability to use electronic materials. These materials can include those the library did not pay for itself, such as those provided through the state library administrative agency, library consortium, or vendor at no cost in response to the pandemic. Types of electronic materials include e-books, audio and video downloadables, e-serials (including journals), government documents, databases (including locally mounted, full text or not), electronic files, reference tools, scores, maps, or pictures in electronic or digital format, including materials digitized by the library.
513	Electronic Library Cards Issued Before COVID-19 (C19ECRD1)	Answer <Y>es or <N>o to the following question: “Did the library allow users to complete registration for library cards online without having to come to the library before the Coronavirus (COVID-19) pandemic?” NOTE: Online library cards provide users access to electronic collection materials and databases without having to be physically present at a library outlet to register for the card. Refer to the definition of Number of Registered Users (data element #503).
514	Electronic Library Cards Issued During COVID-19 (C19ECRD2)	Answer <Y>es or <N>o to the following question: “Did the library allow users to complete registration for library cards online without having to come to the library during the Coronavirus (COVID-19) pandemic?” NOTE: Online library cards provide users access to electronic collection materials and databases without having to be physically present at a library outlet to register for the card. Refer to the definition of Number of Registered Users (data element #503).
515	Reference Service During COVID-19 (C19REFER)	Answer <Y>es or <N>o to the following question: “Did the library provide reference service via the Internet or telephone when the building was physically closed to the public during the Coronavirus (COVID-19) pandemic?” NOTE: Refer to the definition of Reference Transactions (data element #502). Include references service provided via email, chat, and text.
516	Outside Service During COVID-19 (C19OUTSD)	Answer <Y>es or <N>o to the following question: “Did the library provide ‘outside’ service for circulation of physical materials at one or more outlets during the Coronavirus (COVID-19) pandemic?” NOTE: Includes any contactless or minimal contact provision of circulation items. Similar terms could include curbside, vestibule, or porch pickups, delivery (mail or drop-off), drive-thru, etc.
517	Live Virtual Programs During COVID-19 (C19LIVEP)	Answer <Y>es or <N>o to the following question: “Did the library provide live, virtual programs via the Internet during the Coronavirus (COVID-19) pandemic?” NOTE: Live, virtual programs (see definition of Total Number of Library programs, data element #600) are conducted via a Web conferencing or Webinar platform such as Facebook, YouTube, or Zoom, during which a library staff member (or other party sponsored by the library) is presenting to or interacting with an audience in real-time.
518	Recordings of Program Content During COVID-19 (C19RECDP)	Answer <Y>es or <N>o to the following question: “Did the library create and provide recordings of program content via the Internet during the Coronavirus (COVID-19) pandemic?” NOTE: Recordings of program content include video or audio recordings created by a library staff person (or other party sponsored by the library) and posted to a video or audio hosting platform for the audience to view or listen to on-demand. Do not include promotional or marketing content.
519	External WiFi Access Before COVID-19 (C19XWIF1)	Answer <Y>es or <N>o to the following question: “Did the library provide Wi-Fi Internet access to users outside the building at one or more outlets before the Coronavirus (COVID-19) pandemic?” NOTE: Includes “parking lot access,” bookmobiles or other mobile facilities with Wi-Fi capabilities.
520	External WiFi Access Added During COVID-19 (C19XWIF2)	Answer <Y>es or <N>o to the following question: “Did the library intentionally provide Wi-Fi Internet access to users outside the building at one or more outlets during the Coronavirus (COVID-19) pandemic?” NOTE: Includes “parking lot access,” bookmobiles or other mobile facilities with Wi-Fi capabilities.
521	External WiFi Access Increased During COVID-19 (C19XWIF3)	Answer <Y>es or <N>o to the following question: “Did the library increase access to Wi-Fi Internet access to users outside the building at one or more outlets during the Coronavirus (COVID-19) pandemic?” NOTE: Includes “parking lot access,” bookmobiles or other mobile facilities with Wi-Fi capabilities. Increasing access could mean removing restrictions on sign-in authorizations, expanding router reach, leaving Wi-Fi service on 24 hours, installing or moving access points to promote or improve external access, etc.
522	Staff Re-Assigned During COVID-19 (C19STOTH)	Answer <Y>es or <N>o to the following question: “Did library staff work for other government agencies or nonprofit organizations instead of, or in addition to, their normal duties during the Coronavirus (COVID-19) pandemic?” NOTE: Include reassignments to other government agencies (e.g., to process unemployment claims), as well as other activities such as the use of library staff to distribute school lunches and other materials. Volunteering during work hours would count but volunteering off hours would not.
550	Total Circulation of Materials³ (TOTCIR)	This is the sum of Use of Electronic Material and Physical Item Circulation (data elements #552 and #553).
551	Circulation of Children’s Materials (KIDCIRCL)	The total annual circulation of all children’s materials in all formats to all users, including renewals.
552	Use of Electronic Material⁴ (ELMATCIR)	Electronic Materials are materials that are distributed digitally online and can be accessed via a computer, the Internet, or a portable device such as an e-book reader. Types of electronic materials include e-books and downloadable electronic video and audio files. Electronic materials packaged together as a unit and checked out as a unit are counted as one use. Include circulation only for items that require a user authentication, and have a limited period of use.
553	Physical Item Circulation⁵ (PHYSCIR)	The total annual circulation of all physical library materials of all types, including renewals. Note: Count all physical materials in all formats that are charged out for use outside the library. Interlibrary loan transactions included are only items borrowed for users. Do not include items checked out to another library.
554	Successful Retrieval of Electronic Information⁶ (ELINFO)	The number of full-content units or descriptive records examined, downloaded, or otherwise supplied to user, from online library resources that require user authentication but do not have a circulation period. Examining documents is defined as having the full text of a digital document or electronic resource downloaded or fully displayed. Some electronic services do not require downloading as simply viewing documents is normally sufficient for user needs. Include use both inside and outside the library. Do not include use of the OPAC or website. [based on NISO Standard Z39.7 (2013) #7.7, p. 43]
555	Electronic Content Use⁷ (ELCONT)	The total annual count of the circulation of electronic materials and the successful retrieval of electronic information (Data elements #552 and #554).
556	Total Collection Use⁸ (TOTCOLL)	The total annual count of physical item circulation, circulation of electronic material and successful retrieval of electronic information (Data elements #552, #553, and #554).

INTER-LIBRARY LOANS

#	Data Element Name (Variable Name)	Data Element Definition
575	Provided To (LOANTO)⁹	These are library materials, or copies of the materials, provided by one autonomous library to another upon request. The libraries involved in interlibrary loans are not under the same library administration. “Library administration” means Administrative Entity (not anything broader). Do not include items loaned between outlets within the same library administrative entity. These data are reported as annual figures.
576	Received From (LOANFM)¹⁰	These are library materials, or copies of the materials, received by one autonomous library from another upon request. The libraries involved in interlibrary loans are not under the same library administration. “Library administration” means Administrative Entity (not anything broader). Do not include items loaned between outlets within the same library administrative entity. These data are reported as annual figures.

Data Element Name

(Variable Name)

Data Element Definition

575

Provided To

(LOANTO)⁹

These are library materials, or copies of the materials, provided by one autonomous library to another upon request. The libraries involved in interlibrary loans are not under the same library administration. “Library administration” means Administrative Entity (not anything broader). Do not include items loaned between outlets within the same library administrative entity. These data are reported as annual figures.

576

Received From

(LOANFM)¹⁰

These are library materials, or copies of the materials, received by one autonomous library from another upon request. The libraries involved in interlibrary loans are not under the same library administration. “Library administration” means Administrative Entity (not anything broader). Do not include items loaned between outlets within the same library administrative entity. These data are reported as annual figures.

LIBRARY PROGRAMS

#	Data Element Name (Variable Name)	Data Element Definition
600	Total Number of Library Programs (TOTPRO)	A program is any planned event which introduces the group attending to any of the broad range of library services or activities or which directly provides information to participants. Programs may cover use of the library, library services, or library tours. Programs may also provide cultural, recreational, or educational information, often designed to meet a specific social need. Examples of these types of programs include film showings, lectures, story hours, literacy, English as a second language, citizenship classes, and book discussions. Count all programs, whether held on- or off-site, that are sponsored or co-sponsored by the library. Exclude programs sponsored by other groups that use library facilities. If programs are offered as a series, count each program in the series. For example, a film series offered once a week for eight weeks should be counted as eight programs. Note: Exclude library activities delivered on a one-to-one basis, rather than to a group, such as one-to-one literacy tutoring, services to homebound, resume writing assistance, homework assistance, and mentoring activities.
601	Number of Children’s Programs (KIDPRO)	A children’s program is any planned event for which the primary audience is children and which introduces the group of children attending to any of the broad range of library services or activities for children or which directly provides information to participants. Children’s programs may cover use of the library, library services, or library tours. Children’s programs may also provide cultural, recreational, or educational information, often designed to meet a specific social need. Examples of these types of programs include story hours and summer reading events. Count all children’s programs, whether held on- or off-site, that are sponsored or co-sponsored by the library. Do not include children’s programs sponsored by other groups that use library facilities. If children’s programs are offered as a series, count each program in the series. For example, a story hour offered once a week, 48 weeks a year, should be counted as 48 programs. Exclude library activities for children delivered on a one-to-one basis, rather than to a group, such as one-to-one literacy tutoring, services to homebound, homework assistance, and mentoring activities. This figure is a subset of the Total Number of Library Programs (data element #600). Note: The National Center for Education Statistics (NCES): Children and Young Adults Defined (Services and Resources for Children and Young Adults in Public Libraries [August 1995, NCES 95357]) defines children as persons age 11 years and under.
602	Number of Young Adult Programs (YAPRO)	A young adult program is any planned event for which the primary audience is young adult and which introduces the group of young adults attending to any of the broad range of library services or activities for young adults or which directly provides information to participants. Young adult programs may cover use of the library, library services, or library tours. Young adult programs may also provide cultural, recreational, or educational information, often designed to meet a specific social need. Examples of these types of programs include book clubs and summer reading events. Count all young adult programs, whether held on- or off-site, that are sponsored or co-sponsored by the library. Do not include young adult programs sponsored by other groups that use library facilities. If young adult programs are offered as a series, count each program in the series. For example, a book club offered every two weeks, 24 weeks a year, should be counted as 24 programs. Exclude library activities for young adults delivered on a one-to-one basis, rather than to a group, such as one-to-one literacy tutoring, services to homebound, homework assistance, and mentoring activities. This figure is a subset of the Total Number of Library Programs (data element #600). Note: Young Adult age is defined as 12 through 18 years and includes 18 year olds. Click on the following link to view information: The Young Adult Services Association (YASLA) defines young adults as age 12 through 18.
603	Total Attendance at Library Programs (TOTATTEN)	This is a total count of the audience at all library programs during the reporting period. (See Total Number of Library Programs, data element #600, for the definition of a library program.)
604	Children’s Program Attendance (KIDATTEN)	The count of the audience at all programs for which the primary audience is children 11 years and under. Include adults who attend programs intended primarily for children. Note: Do not count attendance at library activities for children that are delivered on a one-to-one basis, rather than to a group, such as one-to-one literacy tutoring, services to homebound, homework assistance, and mentoring activities. (See Number of Children’s Programs, data element #601, for the definition of a children’s library program.)
605	Young Adult Program Attendance (YAATTEN)	The count of the audience at all programs for which the primary audience is young adults 12 to 18 years and includes 18 year olds. Include adults* who attend programs intended primarily for young adults. Note: Do not count attendance at library activities for young adults that are delivered on a one-to-one basis, rather than to a group, such as one-to-one literacy tutoring, services to homebound, homework assistance, and mentoring activities. *Please count all patrons that attend the young adult programs regardless of age. (See Number of Young Adult Programs, data element #602, for the definition of a young adult library program.)

Data Element Name (Variable Name)

Data Element Definition

600

Total Number of Library Programs

(TOTPRO)

A program is any planned event which introduces the group attending to any of the broad range of library services or activities or which directly provides information to participants. Programs may cover use of the library, library services, or library tours. Programs may also provide cultural, recreational, or educational information, often designed to meet a specific social need. Examples of these types of programs include film showings, lectures, story hours, literacy, English as a second language, citizenship classes, and book discussions.

Count all programs, whether held on- or off-site, that are sponsored or co-sponsored by the library. Exclude programs sponsored by other groups that use library facilities.

If programs are offered as a series, count each program in the series. For example, a film series offered once a week for eight weeks should be counted as eight programs.

Note: Exclude library activities delivered on a one-to-one basis, rather than to a group, such as one-to-one literacy tutoring, services to homebound, resume writing assistance, homework assistance, and mentoring activities.

601

Number of Children’s

Programs

(KIDPRO)

A children’s program is any planned event for which the primary audience is children and which introduces the group of children attending to any of the broad range of library services or activities for children or which directly provides information to participants. Children’s programs may cover use of the library, library services, or library tours. Children’s programs may also provide cultural, recreational, or educational information, often designed to meet a specific social need. Examples of these types of programs include story hours and summer reading events.

Count all children’s programs, whether held on- or off-site, that are sponsored or co-sponsored by the library. Do not include children’s programs sponsored by other groups that use library facilities. If children’s programs are offered as a series, count each program in the series. For example, a story hour offered once a week, 48 weeks a year, should be counted as 48 programs. Exclude library activities for children delivered on a one-to-one basis, rather than to a group, such as one-to-one literacy tutoring, services to homebound, homework assistance, and mentoring activities. This figure is a subset of the Total Number of Library Programs (data element #600).

Note: The National Center for Education Statistics (NCES): Children and Young Adults Defined (Services and Resources for Children and Young Adults in Public Libraries [August 1995, NCES 95357]) defines children as persons age 11 years and under.

602

Number of Young Adult Programs

(YAPRO)

A young adult program is any planned event for which the primary audience is young adult and which introduces the group of young adults attending to any of the broad range of library services or activities for young adults or which directly provides information to participants. Young adult programs may cover use of the library, library services, or library tours. Young adult programs may also provide cultural, recreational, or educational information, often designed to meet a specific social need. Examples of these types of programs include book clubs and summer reading events.

Count all young adult programs, whether held on- or off-site, that are sponsored or co-sponsored by the library. Do not include young adult programs sponsored by other groups that use library facilities. If young adult programs are offered as a series, count each program in the series. For example, a book club offered every two weeks, 24 weeks a year, should be counted as 24 programs. Exclude library activities for young adults delivered on a one-to-one basis, rather than to a group, such as one-to-one literacy tutoring, services to homebound, homework assistance, and mentoring activities. This figure is a subset of the Total Number of Library Programs (data element #600).

Note: Young Adult age is defined as 12 through 18 years and includes 18 year olds. Click on the following link to view information:

The Young Adult Services Association (YASLA) defines young adults as age 12 through 18.

603

Total Attendance at Library Programs

(TOTATTEN)

This is a total count of the audience at all library programs during the reporting period. (See Total Number of Library Programs, data element #600, for the definition of a library program.)

604

Children’s Program Attendance

(KIDATTEN)

The count of the audience at all programs for which the primary audience is children 11 years and under. Include adults who attend programs intended primarily for children.

Note: Do not count attendance at library activities for children that are delivered on a one-to-one basis, rather than to a group, such as one-to-one literacy tutoring, services to homebound, homework assistance, and mentoring activities. (See Number of Children’s Programs, data element #601, for the definition of a children’s library program.)

605

Young Adult Program

Attendance

(YAATTEN)

The count of the audience at all programs for which the primary audience is young adults 12 to 18 years and includes 18 year olds. Include adults* who attend programs intended primarily for young adults.

Note: Do not count attendance at library activities for young adults that are delivered on a one-to-one basis, rather than to a group, such as one-to-one literacy tutoring, services to homebound, homework assistance, and mentoring activities.

*Please count all patrons that attend the young adult programs regardless of age.

(See Number of Young Adult Programs, data element #602, for the definition of a young adult library program.)

OTHER ELECTRONIC INFORMATION

#	Data Element Name (Variable Name)	Data Element Definition
650	Number of Internet Computers Used by General Public (GPTERMS)	Report the number of the library’s Internet computers [personal computers (PCs) and laptops], whether purchased, leased, or donated, used by the general public in the library.
651	Number of Uses (Sessions) of Public Internet Computers Per Year (PITUSR)	Report the total number of uses (sessions) of the library’s Internet computers in the library during the last year. If the computer is used for multiple purposes (Internet access, word-processing, OPAC, etc.) and Internet uses (sessions) cannot be isolated, report all usage. A typical week or other reliable estimate may be used to determine the annual number. Sign-up forms or Web-log tracking software also may provide a reliable count of uses (sessions). Note: This count includes only the library’s Internet computers. Do not include wifi access using nonlibrary computers. The number of uses (sessions) may be counted manually, using registration logs. Count each use (session) for public internet computers, regardless of the amount of time spent on the computer. A use (session) on the library’s public internet computer(s) three times a year would count as three uses (sessions). Software such as “Historian” can also be used to track the number of uses (sessions) at each public internet computer. If the data element is collected as a weekly figure, multiply that figure by 52 to annualize it.
652	Wireless Sessions (WIFISESS)	Report the number of wireless sessions provided by the library wireless service annually.
653	Website Visits (WEBVISIT)	Visits represent the annual number of sessions initiated by all users from inside or outside the library to the library website. The library website consists of all webpages under the library’s domain. A website “visit” or “session” occurs when a user connects to the library's website for any length of time or purpose, regardless of the number of pages or elements viewed. Usage of library social media accounts (e.g., Facebook, Twitter, etc.) should not be reported here. Libraries unable to collect a count of their website visits should report “-1” (missing). Libraries without websites should report “-3” (not applicable). (Missing values will be imputed in the final dataset, whereas values of not applicable will not be imputed.)

Outlet Data Element Definitions

#	Data Element Name (Variable Name)	Data Element Definition
700	FSCS ID and SEQ (Automatic Display) (FSCSKEY and FSCS_SEQ)	This is the identification code assigned by PLS Web Portal. Outlets are assigned the same FSCS ID as the administrative entity to which they belong, with a unique three-digit suffix added to distinguish each outlet.
700a	Structure Status (STATSTRU)	This is the Structure Change Code to record actions such as adding, deleting, or merging.
701	LIB ID (Optional) (LIBID)	This is the state-assigned identification code for the outlet.
702	Name (LIBNAME)	This is the legal name of the outlet. Note: Provide the legal name of the outlet. Do not use acronyms. Do not abbreviate the name unless it exceeds the PLS Web Portal field length of 60 characters. Avoid abbreviations at the beginning of the name and do not punctuate abbreviations. (See Standard Abbreviations for PLS Web Portal in Appendix G.)
702a	Name Status (STATNAME)	This is the Name Change Code to identify whether the change is an official name change.
703	Street Address (ADDRESS)	This is the complete street address of the outlet. Note: Do not report a post office box or general delivery. For a bookmobile that operates from an administrative entity, branch, or central library, report the address of the administrative entity, branch or central library from which it operates. For a bookmobile that is itself the administrative entity, report the address where the bookmobile is parked at night.
703a	Address Status (STATADDR)	This is the Address Change Code to identify whether the address change is an actual location change.
704	City (CITY)	This is the city or town in which the outlet is located.
705	ZIP Code (ZIP)	This is the standard five-digit postal ZIP code for the street address of the outlet.
707	County of the Outlet (CNTY)	This is the county in which the outlet is physically located.
708	Phone (PHONE)	This is the telephone number of the outlet, including area code. Note: Report telephone number without spacing or punctuation. If the outlet has no phone, enter “–3” (for Not Applicable).
709	Outlet Type Code (C_OUT_TY)	An outlet is a unit of an administrative entity that provides direct public library service. Select one of the following: BM—Books-by-Mail Only. A direct mail order service which provides books and other library materials. Books-by-mail typically serves rural residents, the disabled, the homebound, and others without access to another type of public library outlet. Requests for materials are usually received by mail and by telephone only. Only books-by-mail services that are housed separately from any other type of direct public service outlet (that is, central library, branches, or bookmobiles) should be coded here. BR—Branch Library. A branch library is an auxiliary unit of an administrative entity which has at least all of the following: Separate quarters; An organized collection of library materials; Paid staff; and Regularly scheduled hours for being open to the public. BS—Bookmobile(s). A bookmobile is a traveling branch library. It consists of at least all of the following: A truck or van that carries an organized collection of library materials; A paid staff; and Regularly scheduled hours (bookmobile stops) for being open to the public. Note: A separate outlet record may be created for each bookmobile. You may wish to create separate outlet records for individual bookmobiles if they have different addresses. Alternatively, a bookmobile outlet record may include more than one bookmobile. CE—Central Library. This is one type of single outlet library (SO) or the library which is the operational center of a multiple outlet library (MO or MA). Usually all processing is centralized here and the principal collections are housed here. Synonymous with main library. Note: Each administrative entity may report either no central library or one central library. No administrative entity may report more than one central library. If you wish to identify a central library in the outlet file, identify the library with the largest collection as the central library for FSCS purposes, and report all others as branches. Where there are several coequal outlets and no principal collection, report all such outlets as branches, not central libraries.
711	Square Footage of Outlet (SQ_FEET)	Provide the area, in square feet, of the public library outlet (central library or branch). Report the total area in square feet for each library outlet (central library or branch) separately. This is the area on all floors enclosed by the outer walls of the library outlet. Include all areas occupied by the library outlet, including those areas off-limits to the public. Include any areas shared with another agency or agencies if the outlet has use of that area.
712	Number of Bookmobiles in the Bookmobile Outlet Record (L_NUM_BM)	The number of bookmobiles in the bookmobile outlet record. Note: A bookmobile outlet record may include one or more bookmobiles. Complete this data element only if the outlet record is of the type BS—Bookmobile(s) (see outlet data element #709). A bookmobile is a traveling branch library. It consists of at least all of the following: A truck or van that carries an organized collection of library materials; A paid staff; and Regularly scheduled hours (bookmobile stops) for being open to the public. Count vehicles in use, not the number of stops the vehicle makes.
713	Public Service Hours Per Year (actual hours) (HOURS)	This is the number of annual public service hours for outlets (reported individually by central, branch, bookmobile and Books-by-Mail Only) Note: Include the actual hours open for public service for centrals (data element #209), branches (data element #210), and bookmobiles (data element #211), and Books-by-Mail Only. For each bookmobile, count only the hours during which the bookmobile is open to the public. For administrative entities that offer ONLY books-by-mail service, count the hours that the outlet is staffed for service. Minor variations in public service hours need not be included. Extensive hours closed to the public due to natural disasters or other events should be excluded from the count.
714	Number of Weeks an Outlet is Open (actual weeks) (WKS_OPEN)	This is the number of weeks during the year that an outlet was open to the public. Note: Include the number of weeks open for public service for Centrals (data element #209), Branches (data element #210), Bookmobiles (data element #211), and Books-by-Mail Only. For each bookmobile, count only the weeks during which the bookmobile is open to the public. For administrative entities that offer ONLY books-by-mail service, count the weeks that the outlet is staffed for service. The count should be based on the number of weeks that a library outlet was open for half or more of its scheduled service hours. Extensive weeks closed to the public due to natural disasters or other events should be excluded from the count. Do not calculate based on total number of service hours per year at the outlet level. For example, by dividing total hours by the average hours open per week. Round to the nearest whole number of weeks. If the library was open half or more of its scheduled hours in a given week, round up to the next week. If the library was open less than half of its scheduled hours, round down.
715	Number of Weeks an Outlet Closed Due to COVID-19 (C19WKSCL)	This is the number of weeks during the year that due to the Coronavirus (COVID-19) pandemic, an outlet building was physically closed and the public could not enter, when it otherwise would have been open. NOTE: Round to the nearest whole number. If building did not close to the public due to the pandemic, enter zero. The sum of data elements #714 and #715 should equal or be fewer than 52 weeks. An outlet is considered physically closed when the public cannot access any library buildings or bookmobiles, regardless of staff access. A building can be physically closed but still offer virtual, Wi-Fi, or “curbside” services outside the building.
716	Number of Weeks an Outlet Had Limited Occupancy Due to COVID-19 (C19WKSLO)	This is the number of weeks during the year that an outlet implemented limited public occupancy practices for in-person services at the library building in response to the Coronavirus (COVID-19) pandemic. NOTE: Round to the nearest whole number. If building did not have a limited occupancy or similar practice due to the pandemic, enter zero. Weeks can be counted in both data elements #714 and #716 (that is, a library was open to the public and implementing limited occupancy practices in the same week). Data element #716 should not be greater than data element #714. Limited public occupancy practices can include reduced hours open, limits on the number of public members inside the physical building, appointment only on-site library use, visitor time limits, closed stacks or meeting rooms, etc.

Appendix B Name, Address, and Structure Changes

Name and Address Changes

In direct data entry, changes to the name and address information for an AE or outlet can be made through the appropriate Input Data pages. If you make a change to either field, you also must select the appropriate status code (the codes and their values are listed below) to identify whether the change is an official name change or whether the address change indicates an actual location change. For AEs, status code changes are made in Survey Item 152a, Name Status, and Item 153a, Address Status. For outlets, status code changes are entered in Survey Item 702a, Name Status, and Item 703a, Address Status.

If you are importing your data, the name and address status codes for all AEs and outlets should be recorded in the STATNAME and STATADDR fields on the import files.

Name Changes for Administrative Entities and Outlets

Name changes do not require any additional information other than the FSCS ID information and the code indicating the status (STATNAME) of the field.

No Change From Last Year

STATNAME is 00

Official Name Change

STATNAME is 06

Preferred Spelling for Library Name

STATNAME is 14

Address Changes for Administrative Entities and Outlets

Address changes do not require any additional information other than the FSCS ID information and the code indicating the status (STATADDR) of the field.

No Change From Last Year

STATADDR is 00

Move to New Location

STATADDR is 07

Preferred Street Address

STATADDR is 15

Administrative Entity Structure Changes

Diagrams are included for each type of structure change to indicate clearly what the fields on the file should contain. The diagrams are only partial representations of the file. An X is a placeholder and means that information must be supplied for that field. If the information in that column is not needed for the change, use -3 to indicate not applicable.

00 – No Change From Last Year

This simply means that nothing about the library’s structure has changed from the previous year. The only information required is the FSCSKEY and STATSTRU.

FSCSKEY = the prior year FSCSKEY
STATSTRU = 00
LINKID = -3
OLDID = -3

FSCSKEY	STATSTRU	LINKID	OLDID
X	00	-3	-3

Example:

The New York Public Library is still the New York Public Library. The FSCSKEY is provided because the library will be included on the current year file. No other records are involved, so the LINKID is not needed. The OLDID field is not needed because no information is required for the historical tracking.

The record appears as follows:

FSCSKEY	STATSTRU	LINKID	OLDID
NY0778	00	-3	-3

NOTE: If you are preparing an import file, it is important to remember that you cannot have any empty or blank fields on your file. Fill all non-applicable fields with -3.

01 – Existing Administrative Entity Absorbs Another Administrative Entity (Adoption)

When one or more AE is no longer functioning independently and now operates as part of another existing AE, the LINKID is required so that we can identify which records are involved. At least two records must exist for a valid adoption to occur.

NOTE: All outlet records for an adopted AE must be associated with either the adopting AE or a different AE or closed. Please see the section on preparing outlet import files for details. Options for the existing outlets are:

Adopted by another outlet of the adopting or a different parent AE
Closed
Moved to another AE

For the record that is adopting other AEs:

FSCSKEY = the prior year FSCSKEY
STATSTRU = 01
LINKID is user defined but must be the same as the adopted entity. If the adopting AE does not have a LINKID, one must be created in order to link adopting to adopted (e.g., PA1)
OLDID = -3

For the record(s) being adopted:

FSCSKEY = -3
STATSTRU = 01
LINKID is user defined but must be the same as the adopting entity
OLDID = the prior year FSCSKEY

	FSCSKEY	STATSTRU	LINKID	OLDID
Adopting	X	01	PA1	-3
Adopted	-3	01	PA1	X

Example:

The Hershey Public Library and the Middletown Public Library operated under the AE of the Dauphin County Library System to form one county library in the current year.

Three records are required to resolve the Match Report. The record for Dauphin should contain the current year data because this is the currently active AE. The other two AEs will not be included on the final release files but will be maintained on the PLS Web Portal file, so the structure change must be properly tracked.

The resulting records appear as follows:

	FSCSKEY	STATSTRU	LINKID	OLDID
Dauphin (Adopting)	PA0222	01	PA1	-3
Hershey (Adopted)	-3	01	PA1	PA0221
Middletown (Adopted)	-3	01	PA1	PA0223

02 – Newly Created Administrative Entity (Birth)

When a completely new library has opened in the current year, we track that as a birth. We need the following information in the following fields:

FSCSKEY = -3
STATSTRU = 02
LINKID = -3
OLDID = -3
LIBID = State assigned

	FSCSKEY	STATSTRU	LINKID	OLDID	LIBID
New AE	-3	02	-3	-3	X

Because the FSCSKEY has not been assigned, there is no information for the respondent to provide. Adding a new record for a new library does not involve another library, so the LINKID is unnecessary. Because this is a new record, no OLDID exists from the prior year file.

Please reference the Restorable AE tab in the Match Report before you open a newly created AE (birth) to make sure that the AE you are trying to create is truly new, meaning, the AE was not previously reported then closed, deleted, or temporarily closed.

For future AEs that requested an FSCS ID in a prior year, the reporting year that the library does open, the STATSTRU will be a 02 and the FSCSKEY will be the previously assigned FSCS ID when the record was submitted initially as a future library. ID as follows:

	FSCSKEY	STATSTRU	LINKID	OLDID	LIBID
New AE	X	02	-3	-3	X

03 – Closed (Death)

If an AE was closed for the entire current year, we track the change with the STATSTRU = 03.

NOTE: If an AE was closed for part of the current year but you are reporting data for it, do not report it as closed this reporting cycle.

The record should include the following information:

FSCSKEY = -3
STATSTRU = 03
LINKID = -3
OLDID = the prior year FSCSKEY

	FSCSKEY	STATSTRU	LINKID	OLDID
Closed AE	-3	03	-3	X

Example:

The River Bluffs Regional Library did not operate in the current year. The FSCSKEY is not included on the record because it will not be included in the current year. There is no other record involved, so the LINKID is not needed. However, the historical file needs to be updated, so the FSCSKEY from the prior year must be supplied in the OLDID field.

The record appears as follows:

	FSCSKEY	STATSTRU	LINKID	OLDID
River Bluffs	-3	03	-3	MO0148

To correct inaccurate information, which could include the deletion of a record that was created for a future AE or outlet that never opened, use STATSTRU = 10, Delete an Incorrect Record.

04 – Move Outlet to a Newly Created Administrative Entity (Divorce)

If an outlet has broken away from a parent AE to form its own independent library, we must create a parent AE record to establish the new FSCSKEY. Due to the complexity of this Structure Change, it must be completed through the user interface of the PLS Web Portal and NOT an Import file, ideally after all other data have been input and edited. For assistance executing this Structure Change, please contact the PLS Help Desk.

05 – Merge Two or More Administrative Entities to Form a New Library (Marriage)

When two or more AEs merge into a newly formed library, at least three records should exist on the file. One record includes information for the new library and current year data. In addition, at least two records must exist for the libraries that will be forming the new library.

NOTE: Outlet records for merged AEs must be associated with either the new AE, a different AE, or closed. Please see the section on preparing outlet import files for details. Options for the existing outlets are:

Adopted by another outlet of a different parent AE
Closed
Merged to another AE
Moved to another AE

New AE:

FSCSKEY = -3
STATSTRU = 05
LINKID must be the same for all AEs that are merging. If new AE does not have a LINKID, one must be created in order to link new AE to old AE (e.g., NM1)
OLDID = -3

Two (or more) AEs are merging together (old AEs):

FSCSKEY = -3
STATSTRU = 05
LINKID is the same as the LINKID of the new AE.
OLDID = the prior year FSCSKEY

	FSCSKEY	STATSTRU	LINKID	OLDID
New AE	-3	05	NM1	-3
Old AE	-3	05	NM1	X
Old AE	-3	05	NM1	X

Example:

The Bloomfield Public Library, Aztec Public Library, and Farmington Public Library dissolved as individual AEs and formed a new AE under the name of the San Juan Public Library in the current year. This change requires four records to process. One record will contain all the information for the new San Juan Public Library along with the current year data. Each of the AEs that are no longer in operation must be included with the same LINKID as the new record. A new FSCSKEY must be assigned to the new library, so that field is not applicable. The OLDID field is valid only for the previously existing records.

	FSCSKEY	STATSTRU	LINKID	OLDID
San Juan (New AE)	-3	05	NM1	-3
Bloomfield (Old AE)	-3	05	NM1	NM0074
Aztec (Old AE)	-3	05	NM1	NM0004
Farmington (Old AE)	-3	05	NM1	NM0014

08 – Restore/Undo Was a 03 (Reopen a Closed Administrative Entity)

If a library closed for a time and is reopening, you need to keep the previously assigned FSCSKEY ID. You can obtain a list of AEs that are eligible to restore by selecting Tools then Export Data then Export All Datasets in 1 Excel File. Check for restorable tabs for FSCSKEYs with a STATSTRU code of 03 to find the correct identification number for your record.

FSCSKEY = FSCSKEY from the list of previously closed entities
STATSTRU = 08
LINKID = -3
OLDID = -3

	FSCSKEY	STATSTRU	LINKID	OLDID
Restored AE	X	08	-3	-3

Example:

The Old Harbor Library reopened in the current year and needs to be included on the data file. Because the AE existed previously, we want to maintain the original FSCSKEY, so it should be entered on the record. The LINKID field is not necessary because no other records are involved. The OLDID is not needed because the record will be on the current year file.

The record appears as follows:

	FSCSKEY	STATSTRU	LINKID	OLDID
Old Harbor	AK0108	08	-3	-3

Please reference the Restorable AE tab on the Match Report to find closed, but restorable, AEs with STATSTRU 03.

09– Restore/Undo Was a 10 (Undo a Deleted Administrative Entity)

Libraries removed from the survey for other reasons than a closure also can be restored. You can obtain a list of AEs that are eligible to restore by selecting Tools then Export Data then Export All Datasets in 1 Excel File. Check for FSCSKEYs with a STATSTRU code of 10 to find the correct identification number for your record.

FSCSKEY = the FSCSKEY from the list of previously deleted entities
STATSTRU = 09
LINKID = -3
OLDID = -3

	FSCSKEY	STATSTRU	LINKID	OLDID
Restored AE	X	09	-3	-3

Example:

The Winding Rivers Library System should be included in the current year submission but was deleted previously. Because the AE existed previously, the original FSCSKEY should be used for the current year file. The LINKID field is not necessary because no other records are involved. The OLDID is not needed because the record will be on the current year file.

The record appears as follows:

	FSCSKEY	STATSTRU	LINKID	OLDID
Winding Rivers	WI9013	09	-3	-3

Please reference the Restorable AE tab on the Match Report to find closed, but restorable, AEs with STATSTRU 10.

10 – Delete an Incorrect Record

If a library record should not be on the survey, include a record on the file with the following information to indicate the record is no longer on the file:

FSCSKEY = -3
STATSTRU = 10
LINKID = -3
OLDID = the prior year FSCSKEY

	FSCSKEY	STATSTRU	LINKID	OLDID
Deleted AE	-3	10	-3	X

Example:

The Scotia Public Library was removed from the survey. The FSCSKEY field is not applicable because the record will not be on the current year file. There is no other record involved, so the LINKID is not necessary. The OLDID field must contain the FSCSKEY from the prior year file in order to update the historical file.

The resulting record appears as follows:

	FSCSKEY	STATSTRU	LINKID	OLDID
Scotia	-3	10	-3	NE9038

13 – Add an Existing Administrative Entity Not Previously Reported

To add a library that is not brand new but now meets the FSCS requirements for a public library, we require the following information:

FSCSKEY = -3
STATSTRU = 13
LINKID = -3
OLDID = -3

	FSCSKEY	STATSTRU	LINKID	OLDID
New AE	-3	13	-3	-3

Because the FSCSKEY has not been assigned, the respondent has no information to provide. Adding a new record for a library does not involve another library, so the LINKID is unnecessary. And again, because this is a new record, the OLDID field is not needed.

22 – Future Administrative Entity FSCS ID Request

If a library has not yet opened in the current year but requires an FSCS ID, you can request a future ID. The library will not be carried on final files that are released to the public for the current year, but the ID will be kept on the prior year file in PLS Web Portal file for the next reporting year. The record should include the following information:

FSCSKEY = -3
STATSTRU = 22
LINKID = -3
OLDID = -3

	FSCSKEY	STATSTRU	LINKID	OLDID
Future AE	-3	22	-3	-3

Example:

The River Bluffs Regional Library was built during FY 2019 but will not open its doors until FY 2020. The library would like to have an FSCS ID for budgetary purposes. The library will first need to clear the request with the SDC. The FSCS ID will not be carried on the final current year files that are released to the public, but the ID will be kept, and the library will appear on the following year’s prior year file.

Because the FSCSKEY has not been assigned, there is no information for the respondent to provide. Adding a new record for a future library does not involve another library, so the LINKID is unnecessary. Because this is a new record, no OLDID exists from the previous year.

The record appears as follows:

	FSCSKEY	STATSTRU	LINKID	OLDID
River Bluffs	-3	22	-3	-3

23 – Temporary Closure

If an AE was closed for the entire current year, but plans to reopen in the future, we track the change with the STATSTRU = 23.

NOTE: If an AE was closed for part of a fiscal year but you are reporting data for it, do not report it as closed this reporting cycle.

The record should include the following information:

FSCSKEY = -3
STATSTRU = 23
LINKID = -3
OLDID = X (the prior year FSCSKEY)

	FSCSKEY	STATSTRU	LINKID	OLDID
Closed AE	-3	23	-3	X

Example:

The River Bluffs Regional Library was closed for the current year due to reconstruction. Because the library will be inactive and not included on the current year file, the FSCSKEY is not needed. There is no other record involved, so the LINKID field is not needed. However, the FSCSKEY from the prior year must be supplied in the OLDID field for historical tracking.

The record appears as follows:

	FSCSKEY	STATSTRU	LINKID	OLDID
River Bluffs	-3	23	-3	MO0148

24 – Restore/Undo Was a 23 (Reopen a Temporarily Closed Administrative Entity)

If a library temporarily closed (STATSTRU 23) and will reopen this FY, you must keep the original FSCSKEY. You can obtain a list of AEs that are eligible to restore by selecting Tools then, Export Data then, Export All Datasets in 1 Excel File. Check for FSCSKEYs with a STATSTRU code of 23 to find the correct FSCSKEY for your record.

FSCSKEY = FSCSKEY from the list of previously closed entities
STATSTRU = 24
LINKID = -3
OLDID = -3

	FSCSKEY	STATSTRU	LINKID	OLDID
Restored AE	X	24	-3	-3

Example:

The Old Harbor Library closed temporarily for renovations and reopened in the current year. The library needs to be included on the data file. Because the AE previously existed, we want to maintain the FSCSKEY, so that needs to be entered on the record. The LINKID field is not necessary because no other records are involved. The OLDID is not needed because the record will be on the current year file.

The record appears as follows:

	FSCSKEY	STATSTRU	LINKID	OLDID
Old Harbor	AK0108	24	-3	-3

Please reference the Restorable AE tab on the Match Report to find closed, but restorable, AEs with STATSTRU 23.

25 – Survey Nonrespondent

If a library did not report on the state library survey for the fiscal year

FSCSKEY = FSCSKEY from the list of previously closed entities
STATSTRU = 25
LINKID = -3
OLDID = -3

	FSCSKEY	STATSTRU	LINKID	OLDID
Old Harbor	X	25	-3	-3

Example:

The Old Harbor Library did not respond to their state library survey. The library needs to be included on the data file since they have not officially closed. Because the AE still exists, we will continue to use its FSCSKEY. The LINKID field is not necessary because no other records are involved. The OLDID is not needed because the record will be on the current year file.

The record appears as follows:

	FSCSKEY	STATSTRU	LINKID	OLDID
Old Harbor	AK0108	25	-3	-3

Outlet Structure Changes

Diagrams are included for each type of structure change to clearly indicate what the fields on the file should contain. The diagrams are only partial representations of the file. An X means that information must be supplied for that field. If the information in that column is not needed for the change, use -3 to indicate not applicable.

00– No Change From Last Year

This simply means that nothing about the outlet’s structure has changed from the prior year. The only information required is the FSCSKEY, FSCS_SEQ, and STATSTRU.

FSCSKEY = the PY FSCSKEY
FSCS_SEQ = the PY FSCS_SEQ
STATSTRU = 00
LINKID = -3
PARENTID = -3
OLDID is = -3

	FSCSKEY	FSCS_SEQ	STATSTRU	LINKID	PARENTID	OLDID
Outlet	X	X	00	-3	-3	-3

Example:

The Greenbrier County Library operated in the current year just as it did the prior year. The FSCSKEY is provided because the outlet will be included on the current year file. No other records are involved, so the LINKID is not needed. The PARENTID is not necessary because the FSCSKEY will associate the outlet with the correct AE record. The OLDID field is not needed because no information is required for the historical tracking.

The resulting record appears as follows:

	FSCSKEY	FSCS_SEQ	STATSTRU	LINKID	PARENTID	OLDID
Greenbrier	WV0082	002	00	-3	-3	-3

01 – Existing Outlet Absorbs Another Outlet (Adoption)

If one or more outlets no longer function independently and now operate as part of another existing outlet, we require the following information for the records involved (i.e., you should have at least two records).

Outlet adopting one or more outlets:

FSCSKEY = the prior year FSCSKEY
FSCS_SEQ = the prior year FSCS_SEQ
STATSTRU = 01
LINKID is the same as the LINKID of the outlet that is being absorbed. If adopting outlet does not have a LINKID, one must be created in order to link adopting to adopted (e.g., MI01)
PARENTID = -3
OLDID = -3

Outlet(s) being adopted:

FSCSKEY = -3
FSCS_SEQ = -3
STATSTRU = 01
LINKID is the same as the LINKID of the existing outlet
PARENTID = -3
OLDID = the prior year FSCSKEY and FSCS_SEQ (e.g., AL0002-002)*

	FSCSKEY	FSCS_SEQ	STATSTRU	LINKID	PARENTID	OLDID
Adopting Outlet	X	X	01	MI01	-3	-3
Adopted Outlet	-3	-3	01	MI01	-3	X

Example:

The Ira Township Library moved its collection to the Yale Public Library and did not operate in the current year. Because the Yale Public Library was open, a current year record should be included on the outlet file with the same FSCSKEY/FSCS_SEQ as the prior year. The LINKID is required for both outlet records to make the appropriate connection. The PARENTID is not necessary for either record. Yale has an FSCSKEY value that associates it with the parent record. Ira Township will not be on the current year file. The OLDID is required for Ira Township in order to make the necessary updates to the historical table.

The resulting records appear as follows:

	FSCSKEY	FSCS_SEQ	STATSTRU	LINKID	PARENTID	OLDID
Yale (Adopting)	MI0321	011	01	MI01	-3	-3
Ira (Adopted)	-3	-3	01	MI01	-3	MI0321-006

* The sequence number that follows the FSCSKEY must be three digits. For example, use AL0002-002, not AL0002-2.

02 – Newly Created Outlet (Birth)

When a completely new library has opened in the current year, we track that as a birth. We need the following information in the following fields:

FSCSKEY = -3
FSCS_SEQ = -3
STATSTRU = 02
LINKID = -3
PARENTID = LIBID of the parent AE
OLDID = -3

	FSCSKEY	FSCS_SEQ	STATSTRU	LINKID	PARENTID	OLDID
New Outlet	-3	-3	02	-3	X	-3

Example:

The Oneida County District added a bookmobile. Although the FSCSKEY exists for the parent AE, the sequence number (FSCS_SEQ) needs to be assigned. The LINKID is not necessary because no other record is involved. The PARENTID must be the LIBID of the parent AE to determine the FSCSKEY and next available sequence number. An OLDID does not exist.

The resulting record appears as follows:

	FSCSKEY	FSCS_SEQ	STATSTRU	LINKID	PARENTID	OLDID
Oneida	-3	-3	02	-3	IDMA	-3

Please reference the Restorable Outlet tab on the Match Report before you open a newly created outlet (birth) to ensure the outlet you are trying to create is truly new, meaning, the outlet was not previously reported, then either closed, deleted, or temporarily closed.

For future outlets that requested an FSCS ID in a prior year, the reporting year that the library does open, the STATSTRU will be a 02 and the FSCSKEY and FSCS_SEQ will be the previously assigned FSCS ID when the record was submitted initially as a future ID and the PARENTID will be -3 as follows:

	FSCSKEY	FSCS_SEQ	STATSTRU	LINKID	PARENTID	OLDID
New Outlet	ID	ID	02	-3	-3	-3

03 – Closed (Death)

If an outlet was closed for the entire current year, we track the change simply with the STATSTRU = 03.

NOTE: If an outlet was closed for part of a fiscal year but you are reporting data for it, do not report it as closed this reporting cycle.

Include a record on the file with the following information:

FSCSKEY = -3
FSCS_SEQ = -3
STATSTRU = 03
LINKID = -3
PARENTID = -3
OLDID = the prior year FSCSKEY and FSCS_SEQ (e.g., AL0002-002)*

	FSCSKEY	FSCS_SEQ	STATSTRU	LINKID	PARENTID	OLDID
Closed Outlet	-3	-3	03	-3	-3	X

Example:

The Kitsap Regional Library stopped its bookmobile service last year. Because the bookmobile outlet will not be on the current year file, the FSCSKEY and FSCS_SEQ fields are not needed. No other record is involved, so the LINKID is not needed. The PARENTID field also is not needed. The OLDID is required for historical tracking.

The record appears as follows:

	FSCSKEY	FSCS_SEQ	STATSTRU	LINKID	PARENTID	OLDID
Kitsap	-3	-3	03	-3	-3	WA0060-012

* The sequence number that follows the FSCSKEY must be three digits. For example, use AL0002-002, not AL0002-2.

04 – Move Outlet to Newly Created Administrative Entity (Divorce)

If an outlet has broken away from a parent AE to form its own independent library, we must associate the existing outlet record with the newly created AE record. Due to the complexity of this Structure Change it must be completed through the user interface of the PLS Web Portal and NOT an Import file, ideally after all other data have been input and edited. For assistance executing this Structure Change, please contact the PLS Help Desk.

05 – Merge Two or More Outlets to Form a New Outlet (Marriage)

When two or more outlets merge into a newly formed library, you should include a record for the new library that contains the current year data as well as records for the outlets that are merging (i.e., you should have at least three records). We require the following information:

New outlet:

FSCSKEY = -3
FSCS_SEQ = -3
STATSTRU = 05
LINKID = the LINKID of the outlets that are merging must all be the same. If the new outlet does not have a LINKID, one must be created in order to link the new outlet to the old outlet (e.g., KS1)
PARENTID = the LIBID of parent AE
OLDID = -3

Two (or more) outlets that are merging out of existence:

FSCSKEY = -3
FSCS_SEQ = -3
STATSTRU = 05
LINKID = the LINKID of the new outlet
PARENTID = -3
OLDID = the prior year FSCSKEY and FSCS_SEQ (e.g., AL0002-002)*

	FSCSKEY	FSCS_SEQ	STATSTRU	LINKID	PARENTID	OLDID
New Outlet	-3	-3	05	KS1	X	-3
Old Outlet	-3	-3	05	KS1	-3	X
Old Outlet	-3	-3	05	KS1	-3	X

Example:

The Cimarron City Library consolidated all of its collection into a new central facility in the county. A record for the new outlet with the current year information must be on the file as well as a record for each of the outlets that will be closing as a result of the merger. The FSCSKEY and FSCS_SEQ fields will be assigned. The LINKID ensures that the correct records are included in the structure change. The PARENTID is required for the new record only. The LIBID of the AE provides the association to the correct parent record. The OLDID is required for the old outlet records for historical tracking.

The records appear as follows:

	FSCSKEY	FSCS_ SEQ	STATSTRU	LINKID	PARENT ID	OLDID
Gray County (New Outlet)	-3	-3	05	KS1	KS0048	-3
Cimarron City 1 (Old Outlet)	-3	-3	05	KS1	-3	KS0299-002
Cimarron City 2 (Old Outlet)	-3	-3	05	KS1	-3	KS0299-004
Cimarron City 3 (Old Outlet)	-3	-3	05	KS1	-3	KS0299-005

* The sequence number that follows the FSCSKEY must be three digits. For example, use AL0002-002, not AL0002-2.

08 – Restore/Undo Was a 03 (Reopen a Closed Outlet)

If a library was closed for a time and is reopening, you want to keep the previously assigned FSCSKEY/FSCS_SEQ. You can obtain a list of outlets that are eligible to restore by selecting Tools then Export Data then Export All Datasets in 1 Excel File. Check for FSCSKEY/FSCS_SEQ with a STATSTRU code of 03 to find the correct FSCS ID for your record.

FSCSKEY = FSCSKEY from the list of previously closed entities
FSCS_SEQ = FSCS_SEQ from the list of previously closed entities for the FSCSKEY
STATSTRU = 08
LINKID = -3
PARENTID = -3
OLDID = -3

	FSCSKEY	FSCS_SEQ	STATSTRU	LINKID	PARENTID	OLDID
Restored Outlet	X	X	08	-3	-3	-3

Example:

The Old Harbor Library is restored on the AE file, so the outlet record also is restored. The FSCSKEY and FSCS_SEQ fields are required because the record will be on the current year file. The LINKID is not needed because no other records are involved. The PARENTID is not needed because the outlet can be associated to the parent record from the FSCSKEY field. The OLDID also is not needed.

The record appears as follows:

	FSCSKEY	FSCS_SEQ	STATSTRU	LINKID	PARENTID	OLDID
Old Harbor	AK0108	002	08	-3	-3	-3

Please reference the Restorable Outlet tab on the Match to find the closed outlets. You can restore outlets with STATSTRU code 03 or STATSTRU code 08, which will prevent you from opening a newly created outlet (birth) that was previously reported and then closed.

09 – Restore/Undo Was a 10 (Undo a Deleted Outlet)

Libraries removed from the survey for other reasons than a closure also can be restored. You can obtain a list of outlets that are eligible to restore by selecting Tools then, Export Data then Export All Datasets in 1 Excel File. Check for FSCSKEY/FSCS_SEQ with a STATSTRU code of 10 to find the correct FSCS ID for your record.

FSCSKEY = the FSCSKEY from the list of previously deleted outlet records
FSCS_SEQ = the FSCS_SEQ from the list of previously deleted outlets for the FSCSKEY
STATSTRU = 09
LINKID = -3
PARENTID = -3
OLDID = -3

FSCSKEY

FSCS_SEQ

STATSTRU

LINKID

PARENTID

OLDID

Restored

Outlet

-3

Example:

The Winding River Library System was restored to the AE file and the outlet also should be restored. The FSCSKEY and FSCS_SEQ fields are required because the library will be on the current year file. The LINKID field is not necessary because no other records are involved. The PARENTID is not necessary because the FSCSKEY provides the association to the parent record. The OLDID also is not needed.

The record appears as follows:

FSCSKEY

FSCS_SEQ

STATSTRU

LINKID

PARENTID

OLDID

Winding

River

WI9013

003

-3

Please reference the Restorable Outlet tab on the Match to find the outlet with the STATSTRU code 10. To restore the outlet, use STATSTRU code 09, which will prevent you from opening a new outlet (birth) previously reported and then deleted.

10 – Delete an Incorrect Record

If a library record should not be on the survey, include a record on the file with the following information to indicate the record is no longer on the file:

FSCSKEY = -3
FSCS_SEQ = -3
STATSTRU = 10
LINKID = -3
PARENTID = -3
OLDID = the prior year FSCSKEY/FSCS_SEQ (e.g., AL0002-002)*

FSCSKEY

FSCS_SEQ

STATSTRU

LINKID

PARENTID

OLDID

Deleted

Outlet

-3

Example:

The Scotia Public Library was removed from the survey. The FSCSKEY and FSCS_SEQ fields are not applicable because the record will not be on the current year file. There is no other record involved, so the LINKID is not necessary. The OLDID field must contain the FSCSKEY/FSCS_SEQ from the prior year file in order to update the historical file.

The resulting record appears as follows:

FSCSKEY

FSCS_SEQ

STATSTRU

LINKID

PARENTID

OLDID

Scotia

-3

NE9038-

001

* The sequence number that follows the FSCSKEY must be three digits. For example, use AL0002-002, not AL0002-2.

11– Outlet Moves to Different Previously Existing Administrative Entity

If an outlet comes under the jurisdiction of another AE that currently exists, we require the following information:

FSCSKEY = -3
FSCS_SEQ = -3
STATSTRU = 11
LINKID = -3
PARENTID = the LIBID of the parent AE the outlet is moving to
OLDID = the prior year FSCSKEY-FSCS_SEQ (e.g., AL0002-002)*

FSCSKEY

FSCS_SEQ

STATSTRU

LINKID

PARENTID

OLDID

Moved

Outlet

-3

Example:

Going back to the merge example for AEs, in which the Bloomfield, Aztec, and Farmington Public Libraries merged to form a county library, we need to resolve the outlets. For simplicity, we will say that all of the outlets will be operating under the newly created AE called San Juan Public Library. The FSCSKEY and FSCS_SEQ fields will be assigned by the PLS Web Portal application after you run a successful Match Report. The LINKID is not necessary because, even though there are several records, they are processed independently in this structure change. The PARENTID is the LIBID of the new San Juan Public Library, so the outlets can be associated with the correct parent record. The OLDID field is necessary for historical tracking.

The records appear as follows:

	FSCSKEY	FSCS_SEQ	STATSTRU	LINKID	PARENTID	OLDID
Bloomfield	-3	-3	11	-3	SANJUAN	NM0074- 002
Aztec	-3	-3	11	-3	SANJUAN	NM0004- 002
Farmington	-3	-3	11	-3	SANJUAN	NM0014- 002

* The sequence number that follows the FSCSKEY must be three digits. For example, use AL0002-002, not AL0002-2.

13 – Add an Existing Outlet Not Previously Reported

To add an outlet that is not brand new but now meets the FSCS definition for a public library, we require the following information:

FSCSKEY = -3
FSCS_SEQ = -3
STATSTRU = 13
LINKID = -3
PARENTID = the LIBID of the parent AE
OLDID = -3

	FSCSKEY	FSCS_SEQ	STATSTRU	LINKID	PARENTID	OLDID
New Outlet	-3	-3	13	-3	103-445	-3

22 – Future Outlet FSCS ID Request

FSCSKEY = -3
FSCS_SEQ = -3
STATSTRU = 22
LINKID = -3
PARENTID = LIBID of the parent AE
OLDID = -3

	FSCSKEY	FSCS_SEQ	STATSTRU	LINKID	PARENTID	OLDID
New Outlet	-3	-3	22	-3	X	-3

Example:

The Oneida Regional Library was built during FY 2019 but will not open its doors until FY 2020. The library would like to have an FSCS ID for budgetary purposes. The library will first need to clear the request with the SDC. The FSCS ID will not be carried on the final current year files that are released to the public, but the ID will be kept and the library will appear on the following year’s prior year file.

Any new AE requires an associated outlet as well. Because the FSCSKEY has not been assigned, there is no information for the respondent to provide. Adding a new record for a future library does not involve another library, so the LINKID is unnecessary. Because this is a new record, no OLDID exists from the prior year. The resulting record appears as follows:

	FSCSKEY	FSCS_SEQ	STATSTRU	LINKID	PARENTID	OLDID
Oneida	-3	-3	22	-3	IDMA	-3

If a future outlet is reported for a second (or more) year, the FSCSKEY and FSCS_SEQ fields contain the values previously assigned, and the PARENTID will be -3, as follows:

	FSCSKEY	FSCS_SEQ	STATSTRU	LINKID	PARENTID	OLDID
New Outlet	ID	ID	22	-3	-3	-3

For the reporting year that the library does open, the STATSTRU will be a 02 and the FSCSKEY and FSCS_SEQ will be the previously assigned FSCS ID when the record was submitted initially as a Future entity and the PARENTID will be -3.

23 – Temporary Closure

If an outlet was closed for the entire current year, but plans to reopen in the future, we track the change with the STATSTRU = 23.

NOTE: If an outlet was closed for part of a fiscal year but you are reporting data for it, do not report it as closed this reporting cycle.

The record should include the following information:

FSCSKEY = -3
FSCS_SEQ = -3
STATSTRU = 23
LINKID = -3
PARENTID = -3
OLDID = the prior year FSCSKEY and FSCS_SEQ (e.g., AL0002-002)*

	FSCSKEY	FSCS_SEQ	STATSTRU	LINKID	PARENTID	OLDID
Closed Outlet	-3	-3	23	-3	-3	X

Example:

The Scotia Public Library closed for the current year due to reconstruction. Because the library will be inactive and not included on the current year file, the FSCSKEY and FSCS_SEQ fields are not needed. There is no other record involved, so the LINKID field is not needed. The PARENTID field also is not needed. However, the FSCSKEY and FSCS_SEQ fields from the prior year must be supplied in the OLDID field for historical tracking.

The record appears as follows:

FSCSKEY

FSCS_SEQ

STATSTRU

LINKID

PARENTID

OLDID

Scotia

Public Library

-3

NE9038-

001

* The sequence number that follows the FSCSKEY must be three digits. For example, use AL0002-002, not AL0002-2.

24 – Restore/Undo Was a 23 (Reopen a Temporarily Closed Outlet)

If a library was temporarily closed with a structure code of 23 and is now ready to reopen, you want to keep the previously assigned FSCS ID. You can obtain a list of AEs that are eligible to restore by selecting Tools then, Export Data then Export All Datasets in 1 Excel File. Check for FSCSKEYs with a STATSTRU code of 23 to find the correct FSCS ID for your record.

FSCSKEY = FSCSKEY from the list of previously closed entities
FSCS_SEQ = FSCS_SEQ from the list of previously closed entities for the FSCSKEY
STATSTRU = 24
LINKID = -3
PARENTID = -3
OLDID = -3

	FSCSKEY	FSCS_SEQ	STATSTRU	LINKID	PARENTID	OLDID
Restored Outlet	X	X	24	-3	-3	-3

Example:

The Old Harbor Library was temporarily closed for renovations and reopened in the current year. The AE and outlet files need to be included on the data file. The FSCSKEY and FSCS_SEQ fields are required because the record will be on the current year file. The LINKID is not needed because no other records are involved. The PARENTID is not needed because the outlet can be associated to the parent record from the FSCSKEY field. The OLDID also is not needed.

The record appears as follows:

	FSCSKEY	FSCS_SEQ	STATSTRU	LINKID	PARENTID	OLDID
Old Harbor	AK0108	002	24	-3	-3	-3

Please reference the Restorable Outlet tab on the Match to find STATSTRU code 23. To restore the outlet, use STATSTRU code 24, which will prevent you from opening a new outlet (birth) previously reported and then temporarily closed.

25 – Survey Nonrespondent

If a library did not report on the state library survey for the fiscal year

FSCSKEY = FSCSKEY from the prior year
FSCS_SEQ = FSCS_SEQ from the prior year
STATSTRU = 25
PARENTID = -3
LINKID = -3
OLDID = -3

	FSCSKEY	FSCS_SEQ	STATSTRU	LINKID	PARENTID	OLDID
Old Harbor	X	X	25	-3	-3	-3

Example:

The Old Harbor Library did not respond to their state library survey. The library needs to be included on the data file since they have not officially closed. Because the AE still exists, we will continue to use its FSCSKEY and FSCS_SEQ. The LINKID field is not necessary because no other records are involved. The PARENTID is not needed because the outlet can be associated to the parent record from the FSCSKEY field. The OLDID is not needed because the record will be on the current year file.

The record appears as follows:

	FSCSKEY	FSCS_SEQ	STATSTRU	LINKID	PARENTID	OLDID
Old Harbor	AK0108	002	25	-3	-3	-3

Appendix C Resolving the Match Report

Resolving the Match Report by Worksheet by Message

Except for invalid codes and duplicate IDs, the messages on the Match Report are general because they refer to format problems on the record. The information on each record must be consistent with the status code in order for the Match Report to complete properly.

The following information is organized by worksheet in the report by edit message. Except for an outright invalid value and the restore options, the following instructions assume the status code is the intended value. If you find you need to change the status code, you should check the record’s identifying information (e.g., FSCSKEY, OLDID, LINKID) to be sure it is consistent with the new code. You can refer to Appendix D for the correct structure codes and formats.

Examples and diagrams are provided. Please note that the diagrams are partial representations of the import record that pertain only to the Match Report.

Reminder: Depending on the record format, you may see more than one error message that relates to a single record and possibly on different worksheets.

Admin Single

Each record has a message to indicate the type of problem that must be resolved.

INVALID Status Code

You can use PLS Web Portal to reset the record to the prior year’s status code through the Structure Change menu, or you can correct the data file to import again. The only valid entries for the STATSTRU field on the administrative entity file are:

00 – no change

01 – one administrative entity or outlet absorbs one or more administrative entities or outlets (adoption)

02 – new

03 – closed

04 – outlet forms independent administrative entity

05 – two administrative entities or outlets merged into a new library (marriage)

08 – previously closed administrative entity or outlet is restored

09 – previously omitted administrative entity or outlet is restored

10 – an administrative entity or outlet is removed from the survey (includes Out of Scope/Errors or for Planned but Never Opened)

13 – a previously existing library is added to the survey for the first time

22 – future administrative entity FSCS ID request

23 – temporary closure of an administrative entity or outlet

24 – previously temporarily closed administrative entity or outlet is restored

25 – nonrespondents

This AE was not on the prior year file

Any entry other than -3 in the FSCSKEY or OLDID fields must have a corresponding record on the prior year public release data file. You can obtain a prior year file from the Export Data utility under the Tools menu.

Possible solutions:

A record was included on the current year file in error and should be removed.

You can delete the record either from your import file or through the Structure Change menu option to Delete an Incorrect Record.

The OLDID entry is incorrect. Check for a possible data entry error. If that is not the problem, check the prior year record from the File Export to ensure you are using the correct FSCS ID information.

Example:

The Beaver County Public Library System closed in the current year. The prior year FSCS ID for the AE is OK0010. That information was entered incorrectly in the OLDID field.

Note: This record will generate two error messages. In addition to the OLDID not being on the prior year file, you will see a message that OK0010 was on the prior year but not the current year.

FSCSKEY	STATSTRU	LINKID	OLDID
-3	03	-3	OK1011

Corrected:

FSCSKEY	STATSTRU	LINKID	OLDID
-3	03	-3	OK0010

This AE was reported last year but is missing on the current year file

An AE was on the survey in the last collection but is not included on the current file.

The record is not on the import file. You can either:

Add a record to the current file with an appropriate status code.
1. If the AE is still active, the status code is 00 or possibly 01 with the correct FSCS information in the FSCSKEY field.
2. If it is inactive, possible status codes are 01, 03, 05, 10, or 23 with the FSCSKEY provided in the OLDID field.

b. The entry in either the FSCSKEY or OLDID field is incorrect. Check the prior year file to ensure you have the same FSCS ID for the AE name listed.

Example:

The Beaver County Public Library System prior year FSCS ID appears to be missing because it was entered incorrectly in the OLDID field.

FSCSKEY	STATSTRU	LINKID	OLDID
-3	03	-3	OK1011

Corrected:

FSCSKEY	STATSTRU	LINKID	OLDID
-3	03	-3	OK0010

FSCSKEY cannot be -3 for STATUS (00, 08, 09, 24, or 25) Records

You must supply FSCS IDs for all records that will be included on the current year file.

Example:

The Stillwater Public Library is being restored to the survey but the FSCSKEY is in the wrong field. (You can obtain a list of restorable records from the Export Data feature under Tools.)

FSCSKEY	STATSTRU	LINKID	OLDID
-3	08	-3	OK0089

Corrected:

FSCSKEY	STATSTRU	LINKID	OLDID
OK0089	08	-3	-3

Example:

The FSCSKEY for the Inola Public Library was entered in the OLDID field.

Hint: This error will produce two messages on the report. The other message is “OLDID must be -3 for STATUS (00, 02, 04, 08, 09, 13, 22, 24, or 25) Records.”

FSCSKEY	STATSTRU	LINKID	OLDID
-3	00	-3	OK0050

Corrected:

FSCSKEY	STATSTRU	LINKID	OLDID
OK0050	00	-3	-3

FSCSKEY must be -3 for STATUS (02, 03, 04, 05, 10, 13, 22, or 23) Records

New records are identified by status codes 02, 04, 05, 13, and 22. Because PLS Web Portal assigns new FSCS IDs only after a successful Match, this information does not exist for records with these structure change codes. If the status code is correct on the record, the only appropriate entry is -3 for the FSCSKEY field.

Inactive records that are excluded from the current year are 01 for an adopted AE, 03, 10, and 23. All FSCS ID information is required in the OLDID field so that the information will be recorded appropriately to the historic file and omitted from the current year table.

Example:

The Medford Public Library is closed for the current processing year, so the FSCSKEY entry should be in the OLDID field.

FSCSKEY	STATSTRU	LINKID	OLDID
OK0063	03	-3	-3

Corrected:

FSCSKEY	STATSTRU	LINKID	OLDID
-3	03	-3	OK0063

Status code 05 signals a newly formed library as well as at least two inactive records. All three records must have -3 in FSCSKEY field.

Example:

The Sentinel Public Library and the Chickasha Public Library are forming a new library. When the record for the new Sam Houston Memorial Library was created, the Sentinel Public Library FSCS ID was left on the record.

FSCSKEY	STATSTRU	LINKID	OLDID
OK0024	05	New1	-3

FSCSKEY	STATSTRU	LINKID	OLDID
-3	05	New1	OK0024

FSCSKEY	STATSTRU	LINKID	OLDID
-3	05	New1	OK0021

Corrected: In this instance, only the new record needs to be changed.

FSCSKEY	STATSTRU	LINKID	OLDID
-3	05	New1	-3

LINKID cannot be -3 for STATUS (01 or 05) Records

Adoptions and marriages are structure changes that involve more than one AE record. To process the records correctly, the LINKID field must be the same for all associated records.

You must identify the associated records and enter the proper LINKID value.

Adoption Example: The Cherokee City-County Library is adopting the Carmen Public Library. Unfortunately, the LINKID fields for the two records were not completed.

FSCSKEY	STATSTRU	LINKID	OLDID
OK0020	01	-3	-3
-3	01	-3	OK0016

Corrected:

FSCSKEY	STATSTRU	LINKID	OLDID
OK0020	01	OK1	-3
-3	01	OK1	OK0040

Merge (marriage) Example: The Frederick Public Library and the Grandfield Public Library merged to form a new Tillman County Public Library. When the record for the new AE was added to the file, the LINKID was omitted.

FSCSKEY	STATSTRU	LINKID	OLDID
-3	05	OK4	OK0038
-3	05	OK4	OK0040
-3	05	-3	-3

Corrected:

FSCSKEY	STATSTRU	LINKID	OLDID
-3	05	OK4	OK0038
-3	05	OK4	OK0040
-3	05	OK4	-3

NOTE: The LINKID field is the same for records in the same transaction but should be unique for each set of records.

LINKID must be -3 for STATUS (00, 02, 03, 04, 08, 09, 10, 13, 22, 23, 24, or 25) Records

The LINKID field is only required when two or more records are affected by the same structure change. Any records with the values listed above for STATSTRU must have the LINKID field as -3.

Example:

The Vinita Public Library is closed for the current year. This closing does not involve another AE, so the LINKID is unnecessary.

FSCSKEY	STATSTRU	LINKID	OLDID
-3	03	OK0094	OK0094

Corrected:

FSCSKEY	STATSTRU	LINKID	OLDID
-3	03	-3	OK0094

OLDID cannot be -3 for STATUS (03, 10 or 23) Record

Records that will not be on the current year AE file must provide the OLDID field value for historical tracking purposes.

Example:

Wynnewood Public Library was closed for the current year. The software is looking for the FSCS ID information in the OLDID field so that the record can be posted successfully to the historic table.

FSCSKEY	STATSTRU	LINKID	OLDID
OK0103	03	-3	-3

Corrected:

FSCSKEY	STATSTRU	LINKID	OLDID
-3	03	-3	OK0103

OLDID must be -3 for STATUS (00, 02, 04, 08, 09, 13, 22, 24, or 25) Records

The OLDID is not appropriate for records included on the current year file. Any record with the listed values for STATSTRU must have the OLDID field set to -3.

Example:

The Oilton Public Library is reopening and must be restored to the survey. The OLDID field was mistakenly filled with the FSCS ID that should be in the FSCSKEY field.

FSCSKEY	STATSTRU	LINKID	OLDID
-3	08	-3	OK0072

Corrected:

FSCSKEY	STATSTRU	LINKID	OLDID
OK0072	05	-3	-3

Cannot restore AE, there is no old AE with STATUS (03, 10, or 23) Records

Each restore code specifically relates to the type of delete action that originally removed the record from the survey. If the current record is truly a restore, refer to the file of eligible restore records to determine the correct status code to restore the record to the survey.

Example:

The Elgin Community Library was temporarily closed and is now ready to reopen. The record is on the historical table with a code of 03, so the correct restore code is 08.

FSCSKEY	STATSTRU	LINKID	OLDID
OK0115	09	-3	-3

Corrected:

FSCSKEY	STATSTRU	LINKID	OLDID
OK0115	08	-3	-3

Administrative Entity does not have any Outlets

Every AE must be associated with at least one outlet record.

Possible solutions:

Check the outlet file to determine if record(s) are missing from the file:

If the AE record was added or restored to the current year file but the outlets were omitted, either add or restore the records as appropriate.
If the records were removed from the file through a structure change (e.g., adopted by another AE or merged with another outlet):

If the action is correct, remove the AE record with the appropriate structure change.
If the action is not correct:

Fix the outlet record, import, and rerun the match.
Reset the outlet record through the Structure Change option from the Tools menu.

If the records were omitted from the file:

Add the record to the import file, input again, and re-run the match.
Add the record to the database through the Structure Change option from the Tools menu.

If the appropriate record or records are on the outlet file:

For a new outlet, check the PARENTID field to be sure it is the same as the LIBID of the parent AE.
For restored or prior year outlets, check the FSCSKEY field to be sure it is correct.

Admin Multi

This worksheet lists all records associated by the LINKID in structure changes that involve more than one AE. Only one message will be provided for each set of associated records because more than one record may require attention.

All FSCSKEYs and OLDIDs must be unique (unless -3)

The FSCSKEY is unique for every AE record whether it is active or inactive. The OLDID is the FSCSKEY from prior years and must be uniquely referenced on the current year file.

Example:

This record has the same value for the FSCSKEY and OLDID fields. Because the status code is 00 for this example, the OLDID field should be -3.

FSCSKEY	STATSTRU	LINKID	OLDID
OK0003	00	-3	OK0003

Corrected:

FSCSKEY	STATSTRU	LINKID	OLDID
OK0003	00	-3	-3

Example:

The Fairview City Library closed but the OLDID information was entered incorrectly and matches another record with the same FSCSKEY value.

FSCSKEY	STATSTRU	LINKID	OLDID
-3	03	-3	OK0073

Corrected:

FSCSKEY	STATSTRU	LINKID	OLDID
OK0037	00	-3	-3

In this case, you also will get a message on the Admin Single page because OK0037 is on the prior year file but is not on the current year.

All LIBIDs must be unique for AE records

The LIBID field is used to associate outlet records with the parent AE and therefore must not be duplicated on the AE file.

These records do not comply with the rules for Adoption

An adoption occurs when two or more AEs merge but one of them remains on the current file. These records must share the same LINKID value so that the correct records are processed together. The information required is different for the record that will be on the current file than for the record(s) that will be excluded.

Refer to Appendix D for diagrams illustrating how the records should be constructed. Possible solutions:

If your Match Report shows only one record with status 01:

If a record is missing, you must include the record(s) for the other AEs involved.

If the LINKID is missing on another record in your file, you must correct it.

If two or more records have the same LINKID but the status codes are not all 01, determine if the records listed are supposed to be associated:

If the records are not supposed to be associated and the status code is correct, change the value of the LINKID field to -3.

If the records are supposed to be associated, change the status code to 01.

If two or more records exist on the current file with the same LINKID and status 01, you must examine the individual records to determine the problem.
The record that will remain on the file:

The FSCSKEY must exist on the prior year file.

The OLDID must be -3.

The record(s) not left on the file:

The FSCSKEY must be -3.

The OLDID must exist on the prior year file.

These records do not comply with the rules for Marriage

A marriage occurs when two or more AEs merge to create a wholly new AE. The marriage is different from the adoption structure change because a record must be on the file that contains the data for the newly formed AE. All of the records must share the same LINKID value so that the correct records are processed together. Different information is required for each record to determine which is the new AE record and which records are being removed from the survey.

Refer to Appendix B for diagrams illustrating how the records should be constructed. Possible solutions:

If your Match Report shows less than three records with status code 05:

If any records are missing, you must add them to the file.

If the LINKID is missing on one or more records, you must add it to the appropriate AEs.

If three or more records share the same LINKID but the status codes are not 05 for all, determine if the records listed are supposed to be associated:

Change the LINKID to -3 if the records are not associated and the status codes are correct.

Change the status code to 05 if the records are associated.

If three or more records exist on the current file with the same LINKID and status 05, you must examine the individual records to determine the problem.

The record that will be created for the current file:

The FSCSKEY must be -3.
The OLDID must be -3.

The records not remaining on the file:

The FSCSKEY must be -3.
The OLDID must exist on the prior year file.

Outlet Single

Each record has a message to indicate the type of problem that must be resolved.

INVALID Status Code

The only valid entries for the STATSTRU field on the outlet file are:

00 – no change

01 – one AE or outlet absorbs one or more AEs or outlets (adoption)

02 – new

03 – closed

04 – outlet forms independent AE

05 – two AEs or outlets merged into a new library (marriage)

08 – previously closed AE or outlet is restored

09 – previously omitted AE or outlet is restored

10 – an AE or outlet is removed from the survey (includes Out of Scope/Errors or for Planned but Never Opened (formerly 26))

11 – an outlet moves to a different parent AE

13 – a previously existing library is added to the survey for the first time

22 – future outlet FSCS ID request

23 – temporarily closed outlet

24 – previously temporarily closed outlet is restored

25 – nonrespondents

This outlet was not on the prior year file

Any entry in the FSCSKEY-FSCS_SEQ or OLDID fields must have a corresponding record on the prior year file. You can obtain a prior year file from the Export Data utility under the Tools menu.

Possible solutions:

A record was included on the current year file in error and should be removed. You can use the Delete an Incorrect Record option on the Structure Change menu or simply delete the record from your data file and import again.

The FSCSKEY-FSCS_SEQ or OLDID entry is incorrect. Check the prior year file to make corrections to your data file. You can correct only the import file for this problem.

Example:

The Wright Library closed but the OLDID value is entered incorrectly.

FSCSKEY	FSCS_SEQ	STATSTRU	LINKID	PARENTID	OLDID
-3	-3	03	-3	-3	CR0074- 02X

Corrected:

FSCSKEY	FSCS_SEQ	STATSTRU	LINKID	PARENTID	OLDID
-3	-3	03	-3	-3	CR0074- 022

You intended to restore a previously closed record.

Example:

The Tulsa City-County Library System outlet was previously closed. The record is a legitimate restore candidate, so if it is to remain on the file, the value for STATSTRU should be 08.

FSCSKEY	FSCS_SEQ	STATSTRU	LINKID	PARENTID	OLDID
OK0093	022	00	-3	-3	-3

Corrected:

FSCSKEY	FSCS_SEQ	STATSTRU	LINKID	PARENTID	OLDID
OK0093	022	08	-3	-3	-3

NOTE: The FSCS_SEQ must be three digits. For example, use AL0002-002, not AL0002-2.

This outlet was reported last year but is missing on the current year file

An outlet was on the survey in the last collection but is not included on the current file.

Possible solutions:

The entry in either the FSCSKEY-FSCS_SEQ or OLDID field is incorrect. Check the prior year file to ensure you have the same FSCS ID for the outlet name listed.

Example:

The Alva Public Library (OK0003-002) is being adopted by another outlet. The OLDID field is not correct, so the record appears to be unaccounted from the previous year.

FSCSKEY	FSCS_SEQ	STATSTRU	LINKID	PARENTID	OLDID
-3	-3	01	OK1	-3	OK0003- 00X

Corrected:

FSCSKEY	FSCS_SEQ	STATSTR U	LINKID	PARENTI D	OLDID
-3	-3	01	OK1	-3	OK0003- 002

The record was omitted. Add a record to the current file with an appropriate status code.

If the outlet is still active, the status code is 00.

If the outlet is inactive, possible status codes are 01, 03, 05, 10, or 23.

A record was miscoded in the current year file in error.

See Appendix B Name, Address, and Structure Changes for detailed explanation of name, address, and structure codes.

NOTE: The FSCS_SEQ must be three digits. For example, use AL0002-002, not AL0002-2.

FSCSKEY cannot be -3 for STATUS (00, 08, 09, 24, or 25) Records or FSCS_SEQ cannot be -3 for STATUS (00, 08, 09, 24, or 25) Records

You must supply FSCS ID information for all records that will be included on the current year file.

Example:

The Newcastle Public Library is missing from the file because no FSCS ID information was provided. If the value for STATSTRU is correct, check the prior year file for the required information.

FSCSKEY	FSCS_SEQ	STATSTRU	LINKID	PARENTID	OLDID
-3	-3	00	-3	-3	-3

Corrected:

FSCSKEY	FSCS_SEQ	STATSTRU	LINKID	PARENTID	OLDID
OK0070	004	00	-3	-3	-3

FSCSKEY must be -3 for STATUS (02, 03, 05, 10, 11, 13, 22, or 23) Records or FSCS_SEQ must be -3 for STATUS (02, 03, 05, 10, 11, 13, 22, or 23) Records

New records are identified by status codes 02, 05 (for a newly created outlet from a merger), 11, 13, and 22. Because the FSCS ID has not been assigned, no information for that field exists. The only appropriate entry is -3 for records with these codes.

Example:

The Ardmore Public Library central outlet is going to move to the Chickasaw Regional Library System. Even though the FSCS ID information is available for Chickasaw, the software must still assign the FSCS_SEQ.

FSCSKEY	FSCS_SEQ	STATSTRU	LINKID	PARENTID	OLDID
OK0006	-3	11	-3	1	OK0006-002

Corrected:

FSCSKEY	FSCS_SEQ	STATSTRU	LINKID	PARENTID	OLDID
-3	-3	11	-3	1	OK0006-002

Inactive records that are excluded from the current year are 03, 05 where existing outlets are forming a new outlet 10 or 23. Any FSCS ID information is required in the OLDID field.

Example:

The Walters Public Library central outlet (OK0096-002) is merging with the Watonga Public Library central outlet (OK0097-002). The FSCS ID information for these records should be in the OLDID field so that it can be posted to the historical table.

FSCSKEY	FSCS_SEQ	STATSTRU	LINKID	PARENTID	OLDID
OK0096	002	05	OK55	-3	-3
OK0097	002	05	OK55	-3	-3

Corrected:

FSCSKEY	FSCS_SEQ	STATSTRU	LINKID	PARENTID	OLDID
-3	-3	05	OK55	-3	OK0096-002
-3	-3	05	OK55	-3	OK0097-002

NOTE: The FSCS_SEQ must be three digits. For example, use AL0002-002, not AL0002-2.

LINKID cannot be -3 for STATUS (01 or 05) Records

Adoptions and marriages are structure changes that involve more than one outlet record. To process the records correctly, the LINKID field must be the same for all associated records.

You must identify the associated records and enter the proper LINKID value.

Example:

The Chelsea Public Library outlet record is merging with another outlet but no information is provided on the records involved in the structure change.

FSCSKEY	FSCS_SEQ	STATSTRU	LINKID	PARENTID	OLDID
-3	-3	05	-3	-3	OK0019-002

Corrected:

With the LINKID provided, the PLS Web Portal can now identify the other two records involved in the merger.

FSCSKEY	FSCS_SEQ	STATSTRU	LINKID	PARENTID	OLDID
-3	-3	05	OK50	BOONE	-3
-3	-3	05	OK50	-3	OK0019-002
-3	-3	05	OK50	-3	OK0020- 002

NOTE: The FSCS_SEQ must be three digits. For example, use AL0002-002, not AL0002-2.

LINKID must be -3 for STATUS (00, 02, 03, 08, 09, 10, 11, 13, 22, 23, 24, or 25) Records

The LINKID field is required only when two or more records are affected by the same structure change. Any records with the values listed above for STATSTRU must have the LINKID field as -3.

Example:

The Florence Park Library central outlet is reopening after renovations are complete. No other outlets are required for this structure change, so there is no need for a LINKID.

FSCSKEY	FSCS_SEQ	STATSTRU	LINKID	PARENTID	OLDID
OK0093	008	08	FLO	-3	-3

Corrected:

FSCSKEY	FSCS_SEQ	STATSTRU	LINKID	PARENTID	OLDID
OK0093	008	08	-3	-3	-3

OLDID cannot be -3 for STATUS (03, 10, 11, or 23) Records

Records that will not be on the current year outlet file must provide the OLDID field value for historical tracking purposes.

Example:

The Seiling Public Library is no longer a branch of the Western Plains Library System and is now a branch of the Watonga Public Library. The outlet record will require new FSCS ID information based on the PARENTID provided for Watonga, and the OLDID information is required for historical update.

FSCSKEY	FSCS_SEQ	STATSTRU	LINKID	PARENTID	OLDID
OK0024	006	11	-3	98	-3

Corrected:

FSCSKEY	FSCS_SEQ	STATSTRU	LINKID	PARENTID	OLDID
-3	-3	11	-3	98	OK0024-006

NOTE: The FSCS_SEQ must be three digits. For example, use AL0002-002, not AL0002-2.

OLDID must be -3 for STATUS (00, 02, 08, 09, 13, 22, 24, or 25) Records

Records that will be on the current year outlet file do not require OLDID information.

Example:

The Hollis Public Library is not undergoing any structural change for the current year. The only identification information needed is the FSCS ID fields.

FSCSKEY	FSCS_SEQ	STATSTRU	LINKID	PARENTID	OLDID
OK0002	002	00	-3	-3	OK0002-002

Corrected:

FSCSKEY	FSCS_SEQ	STATSTRU	LINKID	PARENTID	OLDID
OK0002	002	00	-3	-3	-3

PARENTID cannot be -3 for STATUS (02, 11, 13, or 22) Records

The PARENTID is the field that links the outlet to the correct parent AE. It is defined as the LIBID of the parent record and must be provided when outlets are added to the file or moving to a new parent.

Example:

The Davis Public Library is a new branch of the Chickasaw Regional Library System. New FSCS ID information will have to be assigned to the outlet record. The PARENTID must be provided in order to associate the correct outlet and AE records.

FSCSKEY	FSCS_SEQ	STATSTRU	LINKID	PARENTID	OLDID
-3	-3	02	-3	-3	-3

Corrected:

FSCSKEY	FSCS_SEQ	STATSTRU	LINKID	PARENTID	OLDID
-3	-3	02	-3	OK0007	-3

NOTE: The FSCS_SEQ must be three digits. For example, use AL0002-002, not AL0002-2.

PARENTID must be -3 for STATUS (00, 01, 03, 08, 09, 10, 23, 24, or 25) Records

The FSCS ID information is required for the status codes listed above, so the PARENTID is not needed to identify the parent AE.

Example:

The Pond Creek City Library is being restored to the current year file. Restored Outlet records must provide the FSCS ID information and can be associated to the corrected parent AE record. The PARENTID field is not required.

FSCSKEY	FSCS_SEQ	STATSTRU	LINKID	PARENTID	OLDID
OK0108	002	08	-3	POND	-3

Corrected:

FSCSKEY	FSCS_SEQ	STATSTRU	LINKID	PARENTID	OLDID
OK0108	002	08	-3	-3	-3

Cannot restore outlet, there is no old outlet with STATUS (03, 10, or 23)

Example:

The Kansas Public Library was previously closed and is now reopening. The appropriate restore code for a closed outlet is 08.

FSCSKEY	FSCS_SEQ	STATSTRU	LINKID	PARENTID	OLDID
OK8001	001	09	-3	-3	-3

Corrected:

FSCSKEY	FSCS_SEQ	STATSTRU	LINKID	PARENTID	OLDID
OK8001	001	08	-3	-3	-3

Outlet Record is not on the AE file

Every outlet record must have an active parent AE record on the current year file.

Possible solutions:

If the outlet record is active for the current year under the FSCS ID information provided:

The parent AE may require correction in order to be processed as a current year record.

If the AE record is missing from the current year file, add it, ensuring that it is coded properly for current processing.

If the outlet record is not active for the current year under the FSCS ID information provided:

Correct the FSCS ID information if appropriate.

Remove the outlet record from the file.

PARENTID is not on the AE File

Possible solutions:

If the AE record is missing, add it to the file, making sure that the LIBID entry matches the PARENTID entry on the outlet record.

If the AE record is present, make sure the LIBID and PARENTID fields match.

Outlet Multi

This worksheet lists all records associated by the LINKID in structure changes that involve more than one outlet. Only one message will be provided for each set of associated records because more than one record may require attention.

All FSCSKEYs and OLDIDs must be unique (unless -3)

The FSCS ID information is unique for every outlet record whether it is active or inactive. The OLDID is the FSCSKEY from prior years and must be uniquely referenced on the current year file.

Example:

The Suburban Acres Library is moving from its current parent AE to form its own AE. Two records ended up on the file with the same OLDID information because an incorrect “add” record was not removed.

FSCSKEY	FSCS_SEQ	STATSTRU	LINKID	PARENTID	OLDID
-3	-3	02	-3	OK200	OK0093-023
-3	-3	04	-3	OK200	OK0093-023

Corrected:

Remove the incorrect add record.

FSCSKEY	FSCS_SEQ	STATSTRU	LINKID	PARENTID	OLDID
-3	-3	04	-3	OK200	OK0093-023

NOTE: The FSCS_SEQ must be three digits. For example, use AL0002-002, not AL0002-2.

These records do not comply with the rules for Adoption

An adoption occurs when two or more outlets merge but one of them remains on the current file. These records must share the same LINKID value so that the correct records are processed together. The information required is different for the record that will be on the current file than for the record(s) that will be excluded.

Refer to Appendix D for diagrams illustrating how the records should be constructed.

Possible solutions:

If your Match Report shows only one record with status 01:

If a record is missing, you must include the record(s) for the other outlet involved.
If the LINKID is missing on another record in your file, you must correct it.

If two or more records have the same LINKID but the status codes are not all 01, determine if the records listed are supposed to be associated:
1. If the records are not supposed to be associated and the status code is correct, change the value of the LINKID field to -3.
2. If the records are supposed to be associated, change the status code to 01.
If two or more records exist on the current file with the same LINKID and status 01, you must examine the individual records to determine the problem.
The record that will remain on the file:

The FSCSKEY-FSCS_SEQ must exist on the prior year file.

The OLDID must be -3.

The record(s) not left on the file:

The FSCSKEY-FSCS_SEQ must be -3.

The OLDID must exist on the prior year file.

These records do not comply with the rules for Marriage

A marriage occurs when two or more outlets merge to create a wholly new outlet. This is different from the adoption structure change because a record must be on the file that contains the data for the newly formed outlet. All of the records must share the same LINKID value so that the correct records are processed together. Different information is required for each record to determine which is the new outlet record and which records are being removed from the survey.

Refer to Appendix D for diagrams illustrating how the records should be constructed.

Possible solutions:

If your Match Report shows less than three records with status code 05:

If any records are missing, you must add them to the file.

If the LINKID is missing on one or more records, you must add it to the appropriate outlets.

If three or more records share the same LINKID but the status codes are not 05 for all, determine if the records listed are supposed to be associated:

Change the LINKID to -3 if the records are not associated and the status codes are correct.

Change the status code to 05 if the records are associated.

If three or more records exist on the current file with the same LINKID and status 05, you must examine the individual records to determine the problem.

The record that will be created for the current file:

The FSCSKEY-FSCS_SEQ must be -3.
The OLDID must be -3.

The records not remaining on the file:

The FSCSKEY-FSCS_SEQ must be -3.
The OLDID must exist on the prior year file.

Name Changes

This worksheet lists inconsistencies between the name status code (STATNAME) and the year-to-year change in the AE or outlet name.

STATNAME Invalid

The only valid values for STATNAME are:

00 – no change from the prior year

06 – the AE or outlet has made an official name change

14 – the AE or outlet name has changed, but it is not an official change

STATNAME 00 and Name Change

The name field value is not the same as the prior year, but the status code does not explain the change.

STATNAME 06 and no Name Change

The name field value is the same as the prior year, but the status code indicates an official name change.

STATNAME 14 and no Name Change

The name field value is the same as the prior year, but the status code indicates that a minor name change has occurred.

Address Changes

This worksheet lists inconsistencies between the street address status code (STATADDR) and the year-to-year change in the physical location or street address of the administrative entity or outlet record.

STATADDR Invalid

The only valid values for STATADDR are:

00 – no change from the prior year

07 – the AE or outlet has changed its physical location

15 – the address has a minor change from the prior year but is still in the same physical location

STATADDR 00 and Address Change

The address field entry is not the same as the prior year, but the status code does not explain the change.

STATADDR 07 and no Address Change

The address field entry is the same as the prior year, but the status code indicates a location change.

STATADDR 15 and no Address Change

The address field entry is the same as the prior year, but the status code indicates a minor change.

Appendix D Import File Specifications

Administrative Entity Import File Specifications

Variable Name	Data Element Name		Width	ASCII Position	Excel/.csv Column	Type/ Decimals	Item Number
FSCSKEY	IMLS Identification number		6	1	A	Character	150
STATSTRU	Status of AE record current to prior year		2	7	B	Character	150a
STATNAME	Status of LIBNAME current to prior year		2	9	C	Character	152a
STATADDR	Status of ADDRESS current to prior year		2	11	D	Character	153a
LINKID	User Defined, used to link two or more AE together.		20	13	E	Character
OLDID	Old FSCSKEY		6	33	F	Character
LIBID	State assigned identification number MUST BE UNIQUE		20	39	G	Character	151
LIBNAME	Legal Name		60	59	H	Character	152
ADDRESS	Physical Street Address		35	119	I	Character	153
CITY	City		20	154	J	Character	154
ZIP	ZIP Code		5	174	K	Character	155
ADDRES_M	Mailing Address		35	179	L	Character	157
CITY_M	Mailing City		20	214	M	Character	158
ZIP_M	Mailing Zip Code		5	234	N	Character	159
CNTY	County		20	239	O	Character	161
PHONE	Phone		10	259	P	Character	162
C_RELATN	Interlibrary Relationship Code		2	269	Q	Character	200
C_LEGBAS	Legal Basis Code		2	271	R	Character	201
C_ADMIN	Administrative Structure Code		2	273	S	Character	202
C_FSCS	FSCS Public Library Definition		1	275	T	Character	203
GEOCODE	Geographic Code		3	276	U	Character	204
LSABOUND	Legal Service Area Boundary Change		1	279	V	Character	205
STARTDAT	Reporting Period Start Date (mm/dd/yyyy)		10	280	W	Character	206
ENDDATE	Reporting Period End Date (mm/dd/yyyy)		10	290	X	Character	207
POPU_LSA	Population of the Legal Service Area		9	300	Y	Numeric/0	208
CENTLIB	Number of Central Libraries		3	309	Z	Numeric/0	209
BRANLIB		Number of Branch Libraries	3	312	AA	Numeric/0	210
BKMOB		Number of Bookmobiles	3	315	AB	Numeric/0	211
MASTER		ALA-MLS	9	318	AC	Numeric/2	250
LIBRARIA		Total Librarians	9	327	AD	Numeric/2	251
OTHPAID		All Other Paid Employees	9	336	AE	Numeric/2	252
TOTSTAFF		Total Paid Employees	10	345	AF	Numeric/2	253
LOCGVT		Local Government Revenue	9	355	AG	Numeric/0	300
STGVT		State Government Revenue	9	364	AH	Numeric/0	301
FEDGVT		Federal Government Revenue	9	373	AI	Numeric/0	302
OTHINCM		Other Operating Revenue	9	382	AJ	Numeric/0	303
TOTINCM		Total Operating Revenue	10	391	AK	Numeric/0	304
SALARIES		Salaries & Wages Expenditures	9	401	AL	Numeric/0	350
BENEFIT		Employee Benefits Expenditures	9	410	AM	Numeric/0	351
STAFFEXP		Total Staff Expenditures	9	419	AN	Numeric/0	352
PRMATEXP		Print Materials Expenditures	9	428	AO	Numeric/0	353
ELMATEXP		Electronic Materials Expenditures	9	437	AP	Numeric/0	354
OTHMATEX		Other Materials Expenditures	9	446	AQ	Numeric/0	355
TOTEXPCO		Total Collection Expenditures	9	455	AR	Numeric/0	356
OTHOPEXP		Other Operating Expenditures	9	464	AS	Numeric/0	357
TOTOPEXP		Total Operating Expenditures	10	473	AT	Numeric/0	358
LCAP_REV		Local Government Capital Revenue	9	483	AU	Numeric/0	400
SCAP_REV		State Government Capital Revenue	9	492	AV	Numeric/0	401
FCAP_REV		Federal Government Capital Revenue	9	501	AW	Numeric/0	402
OCAP_REV		Other Capital Revenue	9	510	AX	Numeric/0	403
CAP_REV		Total Capital Revenue	9	519	AY	Numeric/0	404
CAPITAL		Total Capital Expenditures	9	528	AZ	Numeric/0	405
BKVOL		Print Materials	9	537	BA	Numeric/0	450
EBOOK		Electronic Books	9	546	BB	Numeric/0	451
AUDIO_PH		Audio—Physical Units	9	555	BC	Numeric/0	452
AUDIO_DL		Audio—Downloadable Titles	9	564	BD	Numeric/0	453
VIDEO_PH		Video—Physical Units	9	573	BE	Numeric/0	454
VIDEO_DL		Video—Downloadable Units	9	582	BF	Numeric/0	455
EC_LO_OT		Local/Other Cooperative Agreements	9	591	BG	Numeric/0	456
EC_ST		State (state government or state library)	9	600	BH	Numeric/0	457
ELECCOLL		Total Electronic Collections	9	609	BI	Numeric/0	458
VISITS		Library Visits	9	618	BJ	Numeric/0	501
VISITRPT		Library Visits Reporting Method	2	620	BK	Character	501a
REFERENC		Reference Transactions	9	629	BL	Numeric/0	502
REFERRPT		Reference Transactions Reporting Method	2	631	BM	Character	502a
REGBOR		Number of Registered Users	9	640	BN	Numeric/0	503
C19CLOSE		Closed Outlets Due to COVID-19	1	641	BO	Character	510
C19PUBSV		Public Services During COVID-19	1	642	BP	Character	511
C19ELMAT		Electronic Materials Added Due to COVID-19	1	643	BQ	Character	512
C19ECRD1		Electronic Library Cards Issued Before COVID-19	1	644	BR	Character	513
C19ECRD2		Electronic Library Cards Issued During COVID-19	1	645	BS	Character	514
C19REFER		Reference Service During COVID-19	1	646	BT	Character	515
C19OUTSD		Outside Service During COVID-19	1	647	BU	Character	516
C19LIVEP		Live Virtual Programs During COVID-19	1	648	BV	Character	517
C19RECDP		Recordings of Program Content During COVID-19	1	649	BW	Character	518
C19XWIF1		External WiFi Access Before COVID-19	1	650	BX	Character	519
C19XWIF2		External WiFi Access Added During COVID-19	1	651	BY	Character	520
C19XWIF3		External WiFi Access Increased During COVID-19	1	652	BZ	Character	521
C19STOTH		Staff Re-Assigned During COVID-19	1	653	CA	Character	522
TOTCIR		Total Circulation of Materials	9	662	CB	Numeric/0	550
KIDCIRCL		Circulation of Children’s Materials	9	671	CC	Numeric/0	551
ELMATCIR		Use of Electronic Material	9	680	CD	Numeric/0	552
PHYSCIR		Physical Item Circulation	9	689	CE	Numeric/0	553
ELINFO		Successful Retrieval of Electronic Information	9	698	CF	Numeric/0	554
ELCONT		Electronic Content Use	10	708	CG	Numeric/0	555
TOTCOLL		Total Collection Use	10	718	CH	Numeric/0	556
LOANTO		Interlibrary Loans Provided To	9	727	CI	Numeric/0	575
LOANFM		Interlibrary Loans Received From	9	736	CJ	Numeric/0	576
TOTPRO		Total Number of Library Programs	9	745	CK	Numeric/0	600
KIDPRO		Number of Children’s Programs	9	754	CL	Numeric/0	601
YAPRO		Number of Young Adult Programs	9	763	CM	Numeric/0	602
TOTATTEN		Total Attendance at Library Programs	9	772	CN	Numeric/0	603
KIDATTEN		Children’s Program Attendance	9	781	CO	Numeric/0	604
YAATTEN		Young Adult Program Attendance	9	790	CP	Numeric/0	605
GPTERMS		Number of Internet Computers Used by General Public	6	796	CQ	Numeric/0	650
PITUSR		Number of Uses (Sessions) of Public Internet Computers Per Year	9	805	CR	Numeric/0	651
WIFISESS		Wireless Sessions	10	815	CS	Numeric/0	652
WEBVISIT		Website Visits	10	825	CT	Numeric/0	653

Outlet Import File Specifications

Variable Name	Data Element Name	Width	ASCII Position	Excel/.csv Column	Type/ Decimals	Item Number
FSCSKEY	IMLS assigned identification number	6	1	A	Character	700
FSCS_SEQ	IMLS assigned identification number suffix	3	7	B	Character	700
STATSTRU	Status of Outlet record current to prior year	2	10	C	Character	700a
STATNAME	Status of LIBNAME current to prior year	2	12	D	Character	702a
STATADDR	Status of ADDRESS current to prior year	2	14	E	Character	703a
LINKID	User Defined, used to link two or more outlets together	20	16	F	Character
PARENTID	LIBID of parent AE	20	36	G	Character
OLDID	Old FSCSKEY – FSCS_SEQ	10	56	H	Character
LIBID	State assigned identification number	20	66	I	Character	701
LIBNAME	Legal Name	60	86	J	Character	702
ADDRESS	Physical Street Address	35	146	K	Character	703
CITY	City	20	181	L	Character	704
ZIP	ZIP Code	5	201	M	Character	705
CNTY	County of the Outlet	20	206	N	Character	707
PHONE	Phone	10	226	O	Character	708
C_ OUT_TY	Outlet Type Code	2	236	P	Character	709
SQ_FEET	Square Footage of Outlet	8	238	Q	Numeric/0	711
L_NUM_BM	Number of Bookmobiles in the Bookmobile Outlet Record	2	246	R	Numeric/0	712
HOURS	Public Service Hours Per Year (actual hours)	4	248	S	Numeric/0	713
WKS_OPEN	Number of Weeks Open (actual weeks)	2	252	T	Numeric/0	714
C19WKSCL	Number of Weeks an Outlet Closed Due to COVID-19	2	254	U	Numeric/0	715
C19WKSLO	Number of Weeks an Outlet Had Limited Occupancy Due to COVID-19	2	256	V	Numeric/0	716

Annotation Import File Specifications

Column	Description	Width	ASCII Position	Excel/.csv Column	Type
RECORD TYPE	Must always be ‘ANNO’	4	1	A	Text
FSCSKEY - FSCS_SEQ	IMLS assigned identification number with suffix for outlets	10	5	B	Text
EDITID	Edit number	5	15	C	Text
COMMENT	Respondent annotation	Max	20	D	Text

Appendix E PLS Contacts

American Institutes for Research (AIR) Contacts
PLS Help Desk:
Phone: 1-866-744-5746, option 1	E-mail: [email protected]
PLS Primary Survey Manager:
Evan Nielsen	[email protected]
PLS Deputy Survey Manager:
Kathryn Low	[email protected]

Appendix F Francis Keppel Award Criteria

Keppel Award Point Criteria—Group 1 (AK, AZ, CA, CT, DE, GA, HI, IA, KY, MA, MD, MO, MT, NC, NM, NV, OK, OR, RI, SC, TN, VA, WV, WY)
(Minimum points required for award = 16, Maximum points = 20)
	Points
Submission Points
Data Submission on or before TBD	10
Data Submission received TBD	8
Data Submission received TBD	6
Data Submission received after TBD	Disqualified
Final Deadline is TBD

Edit Follow-Up Points
Responded to Edit Follow-Up within two weeks	10
Responded to Edit Follow-Up within three weeks	8
Did not respond to Edit Follow-Up	Disqualified

Item Nonresponse
A data item that has been collected more than three years is missing for an entire state	Disqualified

Note: IMLS makes the final decision regarding who receives the Keppel Award. A data submission includes a locked data file and an annotated Edit Report.

Keppel Award Point Criteria—Group 2 (AL, AR, CO, DC, FL, ID, IL, IN, KS, LA, ME, MI, MN, MS, ND, NE, NH, NJ, NY, OH, PA, SD, UT, VT, WA, WI, American Samoa, Guam, Northern Mariana Islands, Puerto Rico, U.S. Virgin Islands)
(Minimum points required for award = 16, Maximum points = 20)
	Points
Submission Points
Data Submission on or before TBD	10
Data Submission received TBD	8
Data Submission received TBD	6
Data Submission received after TBD	Disqualified
Final Deadline is TBD

Edit Follow-Up Points
Responded to Edit Follow-Up within two weeks	10
Responded to Edit Follow-Up within three weeks	8
Did not respond to Edit Follow-Up	Disqualified

Item Nonresponse
A data item that has been collected more than three years is missing for an entire state	Disqualified

Note: IMLS makes the final decision regarding who receives the Keppel Award. A data submission includes a locked data file and an annotated Edit Report.

Keppel Award Point Criteria—Group 3 (TX)
(Minimum points required for award = 16, Maximum points = 20)
	Points
Submission Points
Data Submission on or before TBD	10
Data Submission received TBD	6
Data Submission received after TBD	Disqualified
Final Deadline is TBD

Edit Follow-Up Points
Responded to Edit Follow-Up within two weeks	10
Responded to Edit Follow-Up within three weeks	8
Did not respond to Edit Follow-Up	Disqualified

Item Nonresponse
A data item that has been collected more than three years is missing for an entire state	Disqualified

Note: IMLS makes the final decision regarding who receives the Keppel Award. A data submission includes a locked data file and an annotated Edit Report.

Appendix G Standard Abbreviations

(Use Only if Data Exceed Field Length)

Term	Abbreviation
Administrative, Administration	Adm
American	Amer
Association	Assn
Avenue	Ave
Board	Bd
Bookmobile	Bkmob
Branch	Br
Building	Bldg
Bureau	Bur
Center	Ctr
Central	Ctrl
Circle	Cir
Circulation, Circulating	Circ
Committee	Com
Community	Cmnty
Consolidated	Consol
Cooperative, Cooperating	Coop
County	Cnty
Court	Ct
Department, Departmental	Dept
District	Dist
Division, Divisional	Div
Extension	Ext
Federal	Fed
Fort	Ft
Foundation	Fdn
Free	Fr
General Delivery	Gen Del
Headquarters	Hq
Highway	Hwy
Information	Inf
Interlibrary	IL
Interlibrary Loan	ILL
Joint	Jt
Library District	LD
Library(ies)	L(s)
Memorial	Mem
Metropolitan	Metro
Mount	Mt
Mountain	Mtn
Municipal	Mun
Museum	Mus
National	Natl
Park	Pk
Parkway	Pkwy
People’s	Peop
Public	P
Public Library(ies)	PL(s)
Reading	Rdng
Reference	Ref
Region	Rgn
Regional	Rgnl
Reorganized, Reorganization	Reorg
Research	Res
Room(s)	Rm(s)
Route	Rt
Saint, Street	St
School(s)	Sch(s)
Service(s)	Serv
Society	Soc
Supervisor, Supervisory	Supv
System(s)	Sys
Terrace	Terr
Township	Twp
Trail, Trustee	Tr
University	Univ

Appendix H Summed Data Elements

Summed data elements are derived from summing two or more data elements in the Public Libraries Survey. This differs from data elements that are a reported total or sum. The summed data elements are TOTSTAFF (253), TOTINCM (304), STAFFEXP (352), TOTEXPCO (356), TOTOPEXP (358), CAP_REV (404), ELECCOLL (458), TOTCIR (550), ELCONT (555), and TOTCOLL (556).

Calculating Summed Data Elements

	Sum	Parts
Data Element	TOTSTAFF (253)	MASTER (250)+LIBRARIA (251)+OTHPAID (252)
Notes	251+252=253	*MASTER (250) is included in LIBRARIA (251).

	Sum	Parts
Data Element	TOTINCM (304)	LOCGVT (300)+STGVT (301)+FEDGVT (302)+OTHINCM (303)
Notes	300+301+302+303=304

	Sum	Parts
Data Element	STAFFEXP (352)	SALARIES (350)+BENEFIT (351)
Notes	350+351=352

	Sum	Parts
Data Element	TOTEXPCO (356)	PRMATEXP (353)+ELMATEXP (354)+OTHMATEX (355)
Notes	353+354+355=356

	Sum	Parts
Data Element	TOTOPEXP (358)	STAFFEXP (352)+TOTEXPCO (356)+OTHOPEXP (357)
Notes	352+356+357=358

	Sum	Parts
Data Element	CAP_REV (404)	LCAP_REV (400)+SCAP_REV (401)+FCAP_REV (402)+OCAP_REV (403)
Notes	400+401+402+403=404

	Sum	Parts
Data Element	ELECCOLL (458)	EC_LO_OT (456)+EC_ST (457)
Notes	456+457=458

	Sum	Parts
Data Element	TOTCIR (550)	ELMATCIR (552)+PHYSCIR (553)
Notes	552+553=550

	Sum	Parts
Data Element	ELCONT (555)	ELMATCIR (552)+ELINFO (554)
Notes	552+554=555

	Sum	Parts
Data Element	TOTCOLL (556)	ELMATCIR (552)+PHYSCIR (553)+ELINFO (554)
Notes	552+553+554=556

1 This law was superseded by the National Education Statistics Act of 1994 (P.L. 103-382) and, more recently, by the Education Sciences Reform Act of 2002.

2 STATSTRU 10 is only for removing data entry errors and AEs that never opened. If a library exists but did not submit data for the current year, you should report it as No Change (00) and insert -1 into all accompanying data fields. Contact the PLS Help Desk ([email protected]) if you have questions.

3 Revised data element name

4 Revised data element name and definition

5 New data element

6 New data element

7 New data element

8 New data element

9 Data element number change

10 Data element number change

File Type	application/vnd.openxmlformats-officedocument.wordprocessingml.document
Author	arroy305
File Modified	0000-00-00
File Created	2021-01-13

Public Libraries Survey