Download:
docx |
pdf
Revised:
06/25/2014 OMB Control No.
0648-0330, Expiration Date: 11/30/2020
|
SCALE PRINTED
OUTPUT
|
U.S.
Department of Commerce
NOAA/National
Marine Fisheries Service, Alaska Region
Post
Office Box 21668
Juneau,
Alaska 99802-1668
Fax:
907-586-7465
Telephone:
907-586-7228
|
|
Printed
report of
flow
scale catch
weight
and
cumulative
weight
|
The printed output of
scale weights is used by NMFS staff, observers, and NOAA
Enforcement personnel to maintain accurate records of catch and
to ensure compliance with quotas. The scale printout also forms
the basis of an audit trail for each haul that can be used to
resolve inconsistencies in catch reports submitted by the
observer and the vessel or processor.
These
printouts are not submitted to NMFS. The printed report must be
provided to the authorized scale inspector at each scale
inspection and must also be printed at any time during the
fishing year upon request of the observer, the scale inspector,
NMFS staff, or an authorized officer. The printed reports must
be retained by the vessel owner for three years after the test
occurred. The printed report must include:
Vessel
name
FFP
or FPP number
Haul
or set number
Total
weight of catch in the haul or set
Total
cumulative weight of all fish or other material weighed on the
scale
Date and time the
information is printed
|
Printed report of flow
scale for audit trail
|
Current regulations
require that adjustments to the scale be recorded in the form of
an audit trail that can only be cleared by NMFS or other
authorized personnel. Although scales may be recalibrated or
tested at any time during the day, the audit trail is designed to
record information that will be used to determine whether a scale
had been incorrectly adjusted and then readjusted just prior to
the scale test.
An
audit trail in the form of an event logger must be provided to
document changes made using adjustable components. The following
information must be provided in an electronic form that cannot be
changed or erased by the scale operator, can be printed at any
time, and can be cleared by the scale manufacturer’s
representative upon direction by NMFS or by an authorized scale
inspector. The printed report must include:
Vessel
name
FFP
or FPP number
Haul
or set number
Date
and time (Alaska local time, to the nearest minute) adjustment
was made
Name
or type of adjustment being made
Initial and final
values of the parameter being changed
|
Printed
report
from
flow scale calibration log
|
NMFS requires vessel
operators to print and retain a calibration log that records the
last 1,000 calibrations or all calibrations since the scale
electronics were first put into service, whichever is less. The
limit of 1,000 faults and 1,000 calibrations are expected to
accommodate the total number of calibrations likely to occur
between annual scale inspections. The calibration log must be
printed and retained by the vessel owner before any information
stored in the scale computer memory is replaced.
These
printouts are not submitted to NMFS. The printed record of the
scale calibration log is collected and reviewed at the time of
the annual scale inspection. The calibration log must be printed
on request by NMFS staff, OLE, or other NMFS authorized
personnel. The printed report must include:
Vessel
name
FFP
or FPP number
Month,
day, and year of the calibration
Time
of the calibration (Alaska local time) to the nearest minute
Weight
used to calibrate the scale
Magnitude of the
calibration in comparison to the prior calibration
|
Printed report from
hopper scale catch weight and cumulative weight
|
The scale must produce a
complete and accurate printed report of the weight of each
species in a landing. All of the crab in a delivery must be
weighed on a scale capable of producing a complete printed
report.
A
report of each landing must be printed before the Registered Crab
Receiver submits a Crab Rationalization Program (CR) landing
report (see OMB 0648-0515) and must be printed at least once
every 24 hours prior to submitting a CR crab landing report as
described in § 680.5. Reports must also be printed before
any information stored in the scale computer memory is replaced.
Printed
reports from the scale must be maintained on board the vessel
until the end of the year during which the reports were made and
be made available to NMFS or NMFS authorized personnel. In
addition, the vessel owner must retain printed reports for 3
years after the end of the year during which the printouts were
made. The printed report must include:
Vessel
name
Federal
crab vessel permit number
Weight
of each load in the weighing cycle
Date
and time the information was printed
Total
amount weighed since the last printout was made
Total
cumulative weight of all crab or other material weighed on the
scale
|
Printed report from
hopper scale crab audit trail
|
An audit trail in the form
of an event logger must be provided to document changes made
using adjustable components. The following information must be
provided in an electronic form that cannot be changed or erased
by the scale operator, can be printed at any time, and can be
cleared by the scale manufacturer’s representative upon
direction by NMFS or by an authorized scale inspector.
The
printed report must be provided to the authorized scale inspector
at each scale inspection and must also be printed at any time
upon request of NMFS staff or other NMFS-authorized personnel.
The printed report must include:
Vessel
name
FFP
or FPP number
Haul
or set number
Date
and time (to the nearest minute) that the adjustment was made
Name
or type of adjustment being made
Initial and final
values of the parameter being changed
|
Printed record from the
State of Alaska scale
|
A scale identified in a
shoreside processor or stationary floating processor Catch
Monitoring and Control Plan (CMCP) must produce a printed record
for each delivery, or portion of a delivery, weighed on that
scale. All of the groundfish in a delivery must be weighed on a
scale capable of producing a complete printed record. Printouts
must be retained and made available to NMFS-authorized personnel
including observers.
NMFS
may exempt scales not designed for automatic bulk weighing from
some or all of the printed record requirements if the CMCP
identifies any scale that cannot produce a complete printed
record, states how the processor will use the scale, and states
how the plant intends to produce a complete record of the total
weight of each delivery. The printed report must include:
Processor
name
Weight
of each load in the weighing cycle
Total
weight of fish in each delivery, or portion of the delivery that
was weighed on that scale
Total
cumulative weight of all fish or other material weighed on the
scale since the last
annual
inspection
Date
and time the information is printed
Name
and ADF&G number of the vessel making the delivery
(This
information may be written on the scale printout in pen by the
scale operator
at the time of
delivery.)
|
_________________________________________________________________________________________
PUBLIC
REPORTING BURDEN STATEMENT
A
Federal agency may not conduct or sponsor, and a person is not
required to respond to, nor shall a person be subject to a penalty
for failure to comply with an information collection subject to the
requirements of the Paperwork Reduction Act of 1995 unless the
information collection has a currently valid OMB Control Number. The
approved OMB Control Number for this information collection is
0648-0330. Without this approval, we could not conduct this
information collection. Public reporting for this information
collection is estimated to be approximately 1 minutes per response,
including the time for reviewing instructions, searching existing
data sources, gathering and maintaining the data needed, and
completing and reviewing the information collection. All responses to
this information collection are required to obtain or retain benefits
pursuant to 50 CFR part 679 and under section 402(a) of the Magnuson-
Stevens Act (16 U.S.C. 1801, et seq.). Send comments regarding this
burden estimate or any other aspect of this information collection,
including suggestions for reducing this burden to Assistant Regional
Administrator, Sustainable Fisheries Division, NOAA National Marine
Fisheries Service, P.O. Box 21688. Juneau, AK 99802-1668.
ADDITIONAL
INFORMATION
Before
completing this form please note the following: 1) Notwithstanding
any other provision of law, no person is required to respond to, nor
shall any person be subject to a penalty for failure to comply with,
a collection of information subject to the requirements of the
Paperwork Reduction Act, unless that collection of information
displays a currently valid OMB Control Number; 2) This information
is being used to manage commercial fishing efforts under 50 CFR part
679 and under section 402(a) of the Magnuson-Stevens Act (16 U.S.C.
1801, et seq.)
as amended in 2006; 4) Submission of this information is necessary
for NMFS to approve video monitoring systems; 5) Responses to this
information request are not confidential.
____________________________________________________________________________________________________________
Scale Printed Output
Page
2
of 2
File Type | application/vnd.openxmlformats-officedocument.wordprocessingml.document |
File Title | Observer Sampling Station Inspection Request Form |
Subject | sampling station inspection request form |
Author | NOAA Fisheries |
File Modified | 0000-00-00 |
File Created | 2021-04-29 |