60-day Preclearance

Multi-Piece FRN_2021-04-02.pdf

Servicing Multi-Piece and Single Piece Rim Wheels Standard (29 CFR 1910.177)

60-day Preclearance

OMB: 1218-0219

Document [pdf]
Download: pdf | pdf
17410

Federal Register / Vol. 86, No. 62 / Friday, April 2, 2021 / Notices

some information (e.g., copyrighted
material) is not publicly available to
read or download from this website.
All submissions, including
copyrighted material, are available for
inspection and copying at the OSHA
Docket Office. Information on using the
http://www.regulations.gov website to
submit comments and access the docket
is available at the website’s ‘‘User Tips’’
link. Contact the OSHA Docket Office at
(202) 693–2350, (TTY (877) 889–5627)
for information about materials not
available from the website, and for
assistance in using the internet to locate
docket submissions.
V. Authority and Signature
James S. Frederick, Principal Deputy
Assistant Secretary of Labor for
Occupational Safety and Health,
directed the preparation of this notice.
The authority for this notice is the
Paperwork Reduction Act of 1995 (44
U.S.C. 3506 et seq.) and Secretary of
Labor’s Order No. 1–2012 (77 FR 3912).
Signed at Washington, DC, on March 25,
2021.
James S. Frederick,
Principal Deputy Assistant Secretary of Labor
for Occupational Safety and Health.
[FR Doc. 2021–06796 Filed 4–1–21; 8:45 am]
BILLING CODE 4510–26–P

DEPARTMENT OF LABOR
Occupational Safety and Health
Administration
[Docket No. OSHA–2011–0189]

Servicing Multi-Piece and Single Piece
Rim Wheels; Extension of the Office of
Management and Budget’s (OMB)
Approval of Information Collection
(Paperwork) Requirements
Occupational Safety and Health
Administration (OSHA), Labor.
ACTION: Request for public comments.
AGENCY:

OSHA solicits public
comments concerning the proposal to
extend the Office of Management and
Budget’s (OMB) approval of the
information collection requirements
specified in the Standard on Servicing
Multi-Piece and Single Piece Rim
Wheels. The paperwork provisions of
the Standard includes a requirement
that the manufacturer or a Registered
Professional Engineer certify that
repaired restraining devices and barriers
meet the strength requirements
specified in the Standard and a
requirement that defective wheels and
wheel components be marked or tagged.

jbell on DSKJLSW7X2PROD with NOTICES

SUMMARY:

VerDate Sep<11>2014

23:04 Apr 01, 2021

Jkt 253001

Comments must be submitted
(postmarked, sent, or received) by June
1, 2021.
ADDRESSES:
Electronically: You may submit
comments, including attachments,
electronically at http://
www.regulations.gov, the Federal
eRulemaking Portal. Follow the
instructions online for submitting
comments.
Docket: To read or download
comments or other material in the
docket, go to http://
www.regulations.gov. Documents in the
docket are listed in the http://
www.regulations.gov index; however,
some information (e.g., copyrighted
material) is not publicly available to
read or download through the website.
All submissions, including copyrighted
material, are available for inspection
through the OSHA Docket Office.
Contact the OSHA Docket Office for
assistance in locating docket
submissions.
Instructions: All submissions must
include the agency name and the OSHA
docket number for this Federal Register
notice (OSHA–2011–0189). OSHA will
place comments and requests to speak,
including personal information, in the
public docket, which may be available
online. Therefore, OSHA cautions
interested parties about submitting
personal information such as Social
Security numbers and birthdates. For
further information on submitting
comments, see the ‘‘Public
Participation’’ heading in the section of
this notice titled SUPPLEMENTARY
INFORMATION.
FOR FURTHER INFORMATION CONTACT:
Theda Kenney or Seleda Perryman,
Directorate of Standards and Guidance,
OSHA, U.S. Department of Labor;
telephone (202) 693–2222.
SUPPLEMENTARY INFORMATION:
DATES:

I. Background
The Department of Labor, as part of
the continuing effort to reduce
paperwork and respondent (i.e.,
employer) burden, conducts a
preclearance consultation program to
provide the public with an opportunity
to comment on proposed and
continuing information collection
requirements in accordance with the
Paperwork Reduction Act of 1995 (PRA)
(44 U.S.C. 3506(c)(2)(A)). This program
ensures that information is in the
desired format, reporting burden (time
and costs) is minimal, collection
instruments are clearly understood, and
OSHA’s estimate of the information
collection burden is accurate. The
Occupational Safety and Health Act of

PO 00000

Frm 00062

Fmt 4703

Sfmt 4703

1970 (OSH Act) (29 U.S.C. 651 et seq.)
authorizes information collection by
employers as necessary or appropriate
for enforcement of the OSH Act or for
developing information regarding the
causes and prevention of occupational
injuries, illnesses, and accidents (29
U.S.C. 657). The OSH Act also requires
that OSHA obtain such information
with minimum burden upon employers,
especially those operating small
businesses, and to reduce to the
maximum extent feasible unnecessary
duplication of efforts in obtaining
information (29 U.S.C. 657).
Certification of repair
(§ 1910.177(d)(3)(iv)). This paragraph
requires that when restraining devices
and barriers are removed from service
because they are defective, they shall
not be returned to service until they are
repaired and reinspected. If the repair is
structural, the manufacturer or a
Registered Professional Engineer must
certify that the strength requirements
specified in § 1910.177(d)(3)(i) of the
Standard have been met.
The certification records are used to
assure that equipment has been properly
repaired. The certification records also
provide the most efficient means for
OSHA compliance officers to determine
that an employer is complying with the
Standard.
Marking or tagging of wheel
components (§ 1910.177(e)(2)). This
paragraph requires that defective wheels
and wheel components ‘‘be marked or
tagged unserviceable and removed from
the service area.’’ Under this
requirement, OSHA is providing
employers with sufficient information
from which they can derive the wording
to use in marking the object or
constructing a tag. Therefore, this
provision imposes no paperwork burden
because it falls within the portion of 5
CFR 1320(c)(2) that states, ‘‘The public
disclosure of information originally
supplied by the Federal government to
the recipient for the purpose of
disclosure to the public is not included
within this definition [of ‘collection of
information’]’’.
II. Special Issues for Comment
OSHA has a particular interest in
comments on the following issues:
• Whether the proposed information
collection requirements are necessary
for the proper performance of the
agency’s functions, including whether
the information is useful;
• The accuracy of OSHA’s estimate of
the burden (time and costs) of the
information collection requirements,
including the validity of the
methodology and assumptions used;

E:\FR\FM\02APN1.SGM

02APN1

Federal Register / Vol. 86, No. 62 / Friday, April 2, 2021 / Notices
• The quality, utility, and clarity of
the information collected; and
• Ways to minimize the burden on
employers who must comply; for
example, by using automated or other
technological information collection
and transmission techniques.

jbell on DSKJLSW7X2PROD with NOTICES

III. Proposed Actions
OSHA is requesting that OMB extend
the approval of the information
collection requirements contained in the
Standard on Servicing Multi-Piece and
Single Piece Rim Wheels (29 CFR
1910.177). OSHA is proposing to retain
the current burden hour estimate of one
(1) hour. The agency will summarize the
comments submitted in response to this
notice and will include this summary in
the request to OMB.
Type of Review: Extension of a
currently approved collection.
Title: Servicing Multi-Piece and
Single Piece Rim Wheels (29 CFR
1910.177).
OMB Control Number: 1218–0219.
Affected Public: Business or other forprofits.
Number of Respondents: 85.
Frequency of Responses: On occasion.
Average Time per Response: Various.
Estimated Total Burden Hours: 1.
Estimated Cost (Operation and
Maintenance): $0.
IV. Public Participation—Submission of
Comments on This Notice and Internet
Access to Comments and Submissions
You may submit comments in
response to this document as follows:
(1) Electronically at http://
regulations.gov, which is the Federal
eRulemaking Portal; (2) by facsimile
(fax); or (3) by hard copy. All comments,
attachments, and other materials must
identify the agency name and the OSHA
docket number for the ICR (Docket No.
OSHA–2011–0189). Please note: While
OSHA’s Docket Office is continuing to
accept and process submissions by
regular mail, due to the COVID–19
pandemic, the Docket Office is closed to
the public and not able to receive
submissions to the docket by hand,
express mail, messenger, and courier
service. All comments, attachments, and
other material must identify the agency
name and the OSHA docket number for
the ICR (Docket No. OSHA–2011–0189).
You may supplement electronic
submissions by uploading document
files electronically. If you wish to mail
additional materials in reference to an
electronic or facsimile submission, you
must submit them to the OSHA Docket
Office (see the section of this notice
titled ADDRESSES). The additional
materials must clearly identify your
electronic comments by your name,

VerDate Sep<11>2014

23:04 Apr 01, 2021

Jkt 253001

date, and the docket number so the
agency can attach them to your
comments.
Due to security procedures, the use of
regular mail may cause a significant
delay in the receipt of comments.
Comments and submissions are
posted without change at http://
www.regulations.gov. Therefore, OSHA
cautions comments about submitting
personal information such as social
security numbers and dates of birth.
Although all submissions are listed in
the http://www.regulations.gov index,
some information (e.g., copyrighted
material) is not publicly available to
read or download through this website.
All submissions, including copyrighted
material, are available for inspection
and copying at the OSHA Docket Office.
Information on using the http://
www.regulations.gov website to submit
comments and access the docket is
available at the website’s ‘‘User Tips’’
link. Contact the OSHA Docket Office at
(202) 693–2350, (TTY (877) 889–5627)
for information about materials not
available through the website, and for
assistance in using the internet to locate
docket submissions.
V. Authority and Signature
James S. Frederick, Principal Deputy
Assistant Secretary of Labor for
Occupational Safety and Health,
directed the preparation of this notice.
The authority for this notice is the
Paperwork Reduction Act of 1995 (44
U.S.C. 3506 et seq.) and Secretary of
Labor’s Order No. 1–2012 (77 FR 3912).
Signed at Washington, DC, on March 25,
2021.
James S. Frederick,
Principal Deputy Assistant Secretary of Labor
for Occupational Safety and Health.
[FR Doc. 2021–06797 Filed 4–1–21; 8:45 am]
BILLING CODE 4510–26–P

DEPARTMENT OF LABOR
Office of Workers’ Compensation
Programs
Advisory Board on Toxic Substances
and Worker Health
Office of Workers’
Compensation Programs.
ACTION: Notice of meeting.
AGENCY:

Announcement of meeting of
the Advisory Board on Toxic Substances
and Worker Health (Advisory Board) for
the Energy Employees Occupational
Illness Compensation Program Act
(EEOICPA).
DATES: The Advisory Board will meet
April 22–23, 2021, via teleconference,
SUMMARY:

PO 00000

Frm 00063

Fmt 4703

Sfmt 4703

17411

from 1:00 p.m. to 5:00 p.m. Eastern time
on each day.
ADDRESSES: Submission of comments,
requests to speak, and materials for the
record: You must submit comments,
materials, and requests to speak at the
Advisory Board meeting by April 15,
2021, identified by the Advisory Board
name and the meeting date of April 22–
23, 2021, by any of the following
methods:
• Electronically: Send to:
[email protected] (specify
in the email subject line, for example
‘‘Request to Speak: Advisory Board on
Toxic Substances and Worker Health’’).
• Mail, express delivery, hand
delivery, messenger, or courier service:
Submit one copy to the following
address: U.S. Department of Labor,
Office of Workers’ Compensation
Programs, Advisory Board on Toxic
Substances and Worker Health, Room
S–3522, 200 Constitution Ave. NW,
Washington, DC 20210.
Instructions: Your submissions must
include the Agency name (OWCP), the
committee name (the Advisory Board),
and the meeting date (April 22–23,
2021). Due to security-related
procedures, receipt of submissions by
regular mail may experience significant
delays. For additional information about
submissions, see the SUPPLEMENTARY
INFORMATION section of this notice.
OWCP will make available publicly,
without change, any comments, requests
to speak, and speaker presentations,
including any personal information that
you provide. Therefore, OWCP cautions
interested parties against submitting
personal information such as Social
Security numbers and birthdates.
FOR FURTHER INFORMATION CONTACT: For
press inquiries: Ms. Laura McGinnis,
Office of Public Affairs, U.S.
Department of Labor, Room S–1028, 200
Constitution Ave. NW, Washington, DC
20210; telephone (202) 693–4672; email
[email protected].
SUPPLEMENTARY INFORMATION:
The Advisory Board will meet via
teleconference: Thursday, April 22,
2021, from 1:00 p.m. to 5:00 p.m.
Eastern time; and Friday, April 23,
2021, from 1:00 p.m. to 5:00 p.m.
Eastern time. The teleconference
number and other details for
participating remotely will be posted on
the Advisory Board’s website, http://
www.dol.gov/owcp/energy/regs/
compliance/AdvisoryBoard.htm, 72
hours prior to the commencement of the
first meeting date. Advisory Board
meetings are open to the public.
Public comment session: Thursday,
April 22, 2021, from 4:15 p.m. to 5:00
p.m. Eastern time. Please note that the

E:\FR\FM\02APN1.SGM

02APN1


File Typeapplication/pdf
File Modified2021-04-02
File Created2021-04-02

© 2024 OMB.report | Privacy Policy